Results for igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels

Result: Pass

i915_display_info2 igt_runner2 results2.json results2-xe-load.json guc_logs2.tar i915_display_info_post_exec2 boot2 dmesg2

DetailValue
Duration 3.19 seconds
Hostname 
shard-lnl-5
Igt-Version 
IGT-Version: 2.3-g6f7cf72fa (x86_64) (Linux: 6.19.0-rc4-lgci-xe-xe-4359-440d2cb5f3dfa9cbb+ x86_64)
Out 
Using IGT_SRANDOM=1768000236 for randomisation
Opened device: /dev/dri/card0
Starting subtest: plane-all-modeset-transition-internal-panels
Starting dynamic subtest: pipe-A-eDP-1
Using (pipe A + eDP-1) to run the subtest.
Running test on pipe A with resolution 2880x1800 and sprite size 2048x1800 alpha 1
Dynamic subtest pipe-A-eDP-1: SUCCESS (1.450s)
Starting dynamic subtest: pipe-B-eDP-1
Using (pipe B + eDP-1) to run the subtest.
Running test on pipe B with resolution 2880x1800 and sprite size 2048x1800 alpha 1
Dynamic subtest pipe-B-eDP-1: SUCCESS (1.167s)
Subtest plane-all-modeset-transition-internal-panels: SUCCESS (3.195s)
Err 
Starting subtest: plane-all-modeset-transition-internal-panels
Starting dynamic subtest: pipe-A-eDP-1
Dynamic subtest pipe-A-eDP-1: SUCCESS (1.450s)
Starting dynamic subtest: pipe-B-eDP-1
Dynamic subtest pipe-B-eDP-1: SUCCESS (1.167s)
Subtest plane-all-modeset-transition-internal-panels: SUCCESS (3.195s)
Dmesg
<6> [209.343622] Console: switching to colour dummy device 80x25
<6> [209.343976] [IGT] kms_atomic_transition: executing
<7> [209.349229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [209.349237] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [209.349382] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [209.349489] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [209.349764] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [209.349767] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [209.349898] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [209.349988] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [209.350211] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [209.350214] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [209.350327] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [209.350413] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<7> [209.350695] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]
<7> [209.350698] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]
<7> [209.351137] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [209.351448] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [209.351553] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [209.351654] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [209.351770] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [209.351774] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [209.351776] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [209.351777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [209.351779] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [209.351781] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [209.351782] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor
<5> [209.351784] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [209.351785] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0
<5> [209.351787] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [209.351799] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes
<7> [209.351887] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [209.351975] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [209.352495] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [209.352498] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [209.352499] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [209.352558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:
<7> [209.352561] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [209.352565] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [209.352579] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [209.352582] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [209.352723] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [209.352734] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [209.352737] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [209.352847] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [209.352855] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [209.352857] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [209.352956] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<6> [209.353559] [IGT] kms_atomic_transition: starting subtest plane-all-modeset-transition-internal-panels
<6> [209.354392] [IGT] kms_atomic_transition: starting dynamic subtest pipe-A-eDP-1
<7> [209.577380] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [209.629273] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [209.666566] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [210.189699] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<6> [210.805772] [IGT] kms_atomic_transition: finished subtest pipe-A-eDP-1, SUCCESS
<7> [211.026143] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [211.078138] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<6> [211.096258] [IGT] kms_atomic_transition: starting dynamic subtest pipe-B-eDP-1
<7> [211.115156] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [211.648533] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<6> [212.264438] [IGT] kms_atomic_transition: finished subtest pipe-B-eDP-1, SUCCESS
<7> [212.482768] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [212.534614] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<6> [212.549413] [IGT] kms_atomic_transition: finished subtest plane-all-modeset-transition-internal-panels, SUCCESS
<7> [212.571747] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [213.105024] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<6> [213.311279] [IGT] kms_atomic_transition: exiting, ret=0
<6> [213.322282] Console: switching to colour frame buffer device 180x56
<7> [213.338857] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [213.339432] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [213.339965] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [213.340433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [213.340977] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [213.372849] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [213.373344] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [213.373802] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
Created at 2026-01-09 23:55:06