Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gc49f35440 (x86_64) (Linux: 6.19.0-rc3-lgci-xe-xe-4318-56e91f8b7cd1da01b+ x86_64)
Out 
Using IGT_SRANDOM=1767179209 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.032s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.032s)
Dmesg
<6> [233.052313] Console: switching to colour dummy device 80x25
<6> [233.052497] [IGT] kms_force_connector_basic: executing
<7> [233.056441] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [233.056449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.056454] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.060631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.060661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.060665] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.064840] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.064885] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.064888] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.069054] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<6> [233.069243] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [233.069488] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [233.069493] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.069496] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.069877] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [233.069963] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [233.070337] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [233.070417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [233.070425] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [233.070509] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [233.076576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [233.076583] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [233.076665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] status updated from disconnected to connected
<7> [233.076678] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [233.076726] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [233.076767] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [233.076770] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [233.076775] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [233.076778] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [233.076782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [233.076785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [233.076812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.076816] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.077241] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [233.077326] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [233.077687] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [233.077768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [233.077774] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [233.077854] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [233.083929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [233.083936] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [233.084070] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [233.084073] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [233.084077] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [233.084080] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [233.084082] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [233.084085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [233.084257] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:515:HDMI-A-1] EDID override set
<7> [233.084274] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.084278] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.084556] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:515:HDMI-A-1] ELD monitor IGT
<7> [233.084560] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:515:HDMI-A-1] ELD size 24, SAD count 0
<7> [233.084847] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [233.084933] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [233.085299] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [233.085380] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [233.085460] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [233.085466] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [233.085471] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [233.085474] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [233.085477] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [233.085480] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [233.085483] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [233.085486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [233.085569] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:HDMI-A-1] EDID override reset
<7> [233.085662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.085665] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.086051] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [233.086138] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [233.086533] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [233.086616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [233.086622] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [233.086705] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [233.092778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [233.092784] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [233.092868] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:515:HDMI-A-1] EDID changed, epoch counter 2
<7> [233.092906] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [233.092912] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [233.092918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [233.092920] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [233.092923] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [233.092926] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [233.092929] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [233.092931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [233.093079] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [233.093083] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.093087] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.097256] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] status updated from connected to disconnected
<7> [233.097264] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.097271] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [233.097318] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [233.097362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.097366] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.101496] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<6> [233.101712] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [233.113173] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [233.113179] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [233.113220] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [233.113225] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [233.113739] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [233.114051] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [233.114253] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [233.114446] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [233.114666] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [233.114677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [233.114685] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [233.114690] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [233.114704] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [233.114808] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [233.114902] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [233.115448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [233.115452] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [233.115456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [233.115460] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.115464] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.119604] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.119609] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1]
<7> [233.119612] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-1]
<7> [233.119763] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1] disconnected
<7> [233.119767] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [233.119770] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [233.140775] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.161732] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.182686] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.203638] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.224595] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.245574] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.266533] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.287486] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.308445] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.329398] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.350353] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.371305] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.392255] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.413205] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.434157] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.455112] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.476064] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.497024] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.517980] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.538935] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.559917] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.580894] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.601856] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.622816] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.643774] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.664722] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.685671] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.706622] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.727577] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.748528] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.769479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.790428] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.790528] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [233.790548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [233.790593] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [233.790597] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [233.790744] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [233.791022] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [233.791028] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:552:DP-4]
<7> [233.791191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [233.791195] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes
<7> [233.791200] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:HDMI-A-1] enabled? no
<7> [233.791203] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-1] enabled? no
<7> [233.791206] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [233.791208] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [233.791211] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [233.791239] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [233.791252] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 3840x2160
<7> [233.791255] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [233.791269] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 3840x2160 set (0,0)
<7> [233.811292] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [233.811626] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:506:eDP-1] force updated from 0 to 0 or reprobing
<7> [233.811632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [233.811636] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [233.812099] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [233.812407] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [233.812590] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [233.812764] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [233.812877] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [233.812882] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [233.812884] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [233.812887] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [233.812901] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [233.813004] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [233.813088] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [233.813632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [233.813636] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [233.813639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [233.813669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [233.813673] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [233.814123] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [233.814431] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [233.814584] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [233.814720] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [233.814826] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [233.814830] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [233.814832] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [233.814835] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [233.814846] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [233.814936] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [233.815031] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [233.815779] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [233.815786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [233.815791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [233.815925] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:506:eDP-1] EDID override reset
<7> [233.815947] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [233.815952] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [233.816526] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [233.816825] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [233.816948] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [233.817055] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [233.817156] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [233.817159] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [233.817162] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [233.817164] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [233.817173] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [233.817262] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [233.817347] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [233.817877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [233.817881] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [233.817886] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [233.818068] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [233.818075] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.818080] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.822231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.822254] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.822257] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.826409] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.826493] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:HDMI-A-1] EDID override reset
<7> [233.826507] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [233.826511] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [233.830694] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [233.830778] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:524:DP-1] EDID override reset
<7> [233.830792] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1]
<7> [233.830795] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-1]
<7> [233.830956] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1] disconnected
<7> [233.831042] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [233.831054] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [233.831057] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [233.852065] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.873027] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.893982] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.914931] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.935910] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.956884] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.977844] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [233.998801] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.019762] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.040712] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.061658] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.082604] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.103551] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.124495] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.145439] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.166389] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.187338] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.208282] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.229231] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.250177] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.271123] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.292071] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.313021] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.333970] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.354913] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.375889] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.396853] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.417803] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.438754] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.459698] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.480646] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.501598] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [234.501701] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [234.501718] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [234.501824] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [234.501838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [234.501841] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [234.502001] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [234.502081] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [234.502096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [234.502099] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:552:DP-4]
<7> [234.502250] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [234.522282] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [234.522444] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [234.539268] Console: switching to colour frame buffer device 240x67
Created at 2025-12-31 11:14:36