Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gc49f35440 (x86_64) (Linux: 6.19.0-rc3-lgci-xe-xe-4317-73f2233b9ba9be17e+ x86_64)
Out 
Using IGT_SRANDOM=1767134211 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Dmesg
<6> [204.922189] Console: switching to colour dummy device 80x25
<6> [204.922703] [IGT] kms_force_connector_basic: executing
<7> [204.927439] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [204.927460] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.927474] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.931904] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [204.931966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.931976] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.936312] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [204.936356] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.936364] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.940662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [204.941080] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [204.941816] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [204.941829] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.941838] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.942268] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [204.942483] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [204.942854] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [204.943054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [204.943076] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [204.943296] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [204.945565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [204.945581] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [204.945787] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from disconnected to connected
<7> [204.945819] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [204.945957] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [204.946133] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [204.946143] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [204.946154] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [204.946164] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [204.946172] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [204.946180] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [204.946239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.946250] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.947136] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [204.947360] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [204.947737] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [204.947931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [204.947950] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [204.948159] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [204.950405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [204.950423] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [204.950760] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [204.950770] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [204.950777] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [204.950784] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [204.950791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [204.950797] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [204.951263] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:550:HDMI-A-1] EDID override set
<7> [204.951314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.951325] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.951854] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD monitor IGT
<7> [204.951861] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD size 24, SAD count 0
<7> [204.952064] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [204.952307] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [204.952681] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [204.952877] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [204.953141] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [204.953161] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [204.953173] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [204.953183] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [204.953193] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [204.953202] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [204.953210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [204.953216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [204.953462] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [204.953644] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.953654] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.954070] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [204.954284] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [204.954641] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [204.954835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [204.954850] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [204.955040] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [204.957485] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [204.957500] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [204.957709] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:550:HDMI-A-1] EDID changed, epoch counter 2
<7> [204.957845] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [204.957864] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [204.957879] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [204.957887] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [204.957896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [204.957904] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [204.957912] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [204.957920] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [204.958315] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [204.958327] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.958338] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.962623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from connected to disconnected
<7> [204.962642] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [204.962661] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [204.962791] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [204.962895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.962905] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.967229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [204.967775] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [204.970259] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [204.971276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [204.980701] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [204.980714] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [204.980857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [204.980873] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [204.982755] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [204.983406] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [204.983730] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [204.984043] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [204.984440] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [204.984458] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [204.984470] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [204.984479] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [204.984489] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [204.984532] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [204.984845] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [204.985167] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [204.986314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [204.986329] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [204.986343] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [204.986357] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [204.986369] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [204.986740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [204.986753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [204.986764] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [204.987143] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [204.987155] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [204.987165] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [204.987520] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [204.987532] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [204.987542] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [204.991931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [204.991945] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] enabled? yes
<7> [204.991958] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:DP-1] enabled? no
<7> [204.991967] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:532:DP-2] enabled? no
<7> [204.991976] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [204.991985] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-1] enabled? no
<7> [204.992039] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [204.992079] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] found preferred mode: 1920x1200
<7> [204.992091] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [204.992161] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 1920x1200 set (0,0)
<7> [204.997328] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [204.998512] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:510:eDP-1] force updated from 0 to 0 or reprobing
<7> [204.998530] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [204.998544] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [204.999335] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [204.999923] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [205.000267] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [205.000589] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [205.000950] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [205.000964] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [205.000973] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [205.000982] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [205.000991] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [205.001030] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [205.001371] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [205.001681] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [205.002782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [205.002795] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [205.002808] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [205.002884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [205.002896] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [205.003656] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [205.004227] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [205.004538] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [205.004845] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [205.005216] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [205.005229] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [205.005236] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [205.005244] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [205.005257] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [205.005295] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [205.005595] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [205.005893] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [205.007196] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [205.007208] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [205.007219] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [205.007495] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:510:eDP-1] EDID override reset
<7> [205.007543] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [205.007555] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [205.008285] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [205.008869] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [205.009193] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [205.009492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [205.009813] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [205.009823] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [205.009830] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [205.009837] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [205.009844] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [205.009874] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [205.010205] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [205.010478] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [205.011497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [205.011508] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [205.011519] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [205.011782] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:519:DP-1] EDID override reset
<7> [205.011825] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [205.011836] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [205.012188] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [205.012434] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:532:DP-2] EDID override reset
<7> [205.012477] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [205.012488] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [205.012836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [205.013084] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:541:DP-3] EDID override reset
<7> [205.013165] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [205.013176] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [205.013523] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [205.013926] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [205.013939] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [205.013952] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [205.014305] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [205.014792] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [205.015342] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [205.019846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [205.019921] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [205.019932] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [205.024359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [205.024598] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [205.024640] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [205.024650] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [205.028989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [205.031503] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [205.031868] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [205.038807] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [205.039243] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [205.047308] Console: switching to colour frame buffer device 240x75
Created at 2025-12-30 22:46:02