Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g943af1354 (x86_64) (Linux: 6.19.0-rc3-lgci-xe-xe-4315-633f3e5eab13c5bc2+ x86_64)
Out 
Using IGT_SRANDOM=1767076780 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Dmesg
<6> [198.611804] Console: switching to colour dummy device 80x25
<6> [198.612334] [IGT] kms_force_connector_basic: executing
<7> [198.616961] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [198.617039] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.617054] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.621485] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.621548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.621557] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.625869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.625911] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.625920] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.630221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [198.630644] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [198.631418] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [198.631432] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.631442] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.631874] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.632121] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.632501] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.632712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.632738] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [198.632944] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [198.635237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.635253] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [198.635458] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from disconnected to connected
<7> [198.635494] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [198.635624] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [198.635762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [198.635772] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.635783] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.635793] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [198.635801] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [198.635810] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.635870] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.635879] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.636729] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.636959] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.637369] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.637588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.637616] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [198.637831] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [198.640129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.640146] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [198.640503] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [198.640512] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.640522] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.640531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [198.640540] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [198.640548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.641118] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:550:HDMI-A-1] EDID override set
<7> [198.641170] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.641180] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.641702] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD monitor IGT
<7> [198.641711] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD size 24, SAD count 0
<7> [198.641912] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [198.642163] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.642555] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [198.642775] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [198.643069] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [198.643093] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [198.643107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [198.643115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [198.643124] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [198.643132] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.643140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.643148] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.643429] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [198.643618] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.643628] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.644070] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.644294] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.644684] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.644905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.644923] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [198.645181] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [198.647478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.647496] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [198.647711] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:550:HDMI-A-1] EDID changed, epoch counter 2
<7> [198.647850] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [198.647868] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [198.647883] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [198.647890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.647899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.647907] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [198.647916] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [198.647924] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.648281] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [198.648294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.648304] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.652612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from connected to disconnected
<7> [198.652633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.652653] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [198.652774] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [198.652890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.652899] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.657318] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [198.657792] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [198.660112] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [198.661147] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [198.670509] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [198.670520] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [198.670646] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [198.670658] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [198.671503] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.672073] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.672321] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.672560] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.672839] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.672851] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.672858] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.672866] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [198.672873] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [198.672905] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [198.673303] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.673522] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.674459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [198.674469] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.674478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.674488] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [198.674497] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [198.674762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [198.674771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [198.674779] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [198.675052] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [198.675062] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [198.675070] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [198.675327] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [198.675335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.675343] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.679605] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.679616] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] enabled? yes
<7> [198.679625] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:DP-1] enabled? no
<7> [198.679632] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:532:DP-2] enabled? no
<7> [198.679639] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [198.679645] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-1] enabled? no
<7> [198.679694] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [198.679725] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] found preferred mode: 1920x1200
<7> [198.679733] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [198.679770] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 1920x1200 set (0,0)
<7> [198.687112] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [198.687845] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:510:eDP-1] force updated from 0 to 0 or reprobing
<7> [198.687858] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [198.687867] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [198.688624] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.689154] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.689411] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.689653] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.689933] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.689945] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.689952] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.689959] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [198.689984] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [198.690018] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [198.690274] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.690526] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.691516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [198.691527] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.691537] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.691599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [198.691608] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [198.692267] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.692766] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.693033] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.693280] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.693562] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.693571] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.693577] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.693584] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [198.693590] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [198.693615] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [198.693864] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.694133] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.695105] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [198.695115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.695124] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.695355] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:510:eDP-1] EDID override reset
<7> [198.695395] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [198.695405] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [198.696103] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.696609] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.696880] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.697191] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.697500] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.697510] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.697517] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.697524] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [198.697530] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [198.697558] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [198.697828] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.698117] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.699130] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [198.699140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.699150] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.699407] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:519:DP-1] EDID override reset
<7> [198.699449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [198.699460] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [198.699785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [198.700193] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:532:DP-2] EDID override reset
<7> [198.700231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [198.700241] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [198.700558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [198.700781] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:541:DP-3] EDID override reset
<7> [198.700816] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [198.700826] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [198.701162] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [198.701528] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [198.701541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.701552] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.704030] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [198.704490] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [198.704905] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [198.705922] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.706009] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.706020] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.710344] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.710559] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [198.710596] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [198.710606] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [198.714953] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [198.716802] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [198.717141] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [198.720448] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [198.720874] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [198.728898] Console: switching to colour frame buffer device 240x75
Created at 2025-12-30 06:57:17