Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g943af1354 (x86_64) (Linux: 6.19.0-rc3-lgci-xe-xe-4312-06088c2eebca80076+ x86_64)
Out 
Using IGT_SRANDOM=1767021758 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Dmesg
<6> [238.734021] Console: switching to colour dummy device 80x25
<6> [238.734570] [IGT] kms_force_connector_basic: executing
<7> [238.739766] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [238.739789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.739804] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.744267] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.744332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.744342] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.748665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.748704] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.748712] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.753040] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [238.753507] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [238.754262] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [238.754277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.754288] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.754749] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.755065] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.755456] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.755681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.755704] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [238.755944] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [238.758230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.758247] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [238.758466] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from disconnected to connected
<7> [238.758500] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [238.758633] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [238.758759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [238.758768] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.758778] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.758786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [238.758794] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [238.758801] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.758859] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.758868] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.759331] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.759568] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.759947] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.760184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.760207] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [238.760437] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [238.762729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.762746] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [238.763201] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [238.763212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.763222] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.763231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [238.763238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [238.763246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.763724] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:550:HDMI-A-1] EDID override set
<7> [238.763775] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.763784] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.764442] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD monitor IGT
<7> [238.764451] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD size 24, SAD count 0
<7> [238.764661] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [238.764924] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.765323] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [238.765556] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [238.765833] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [238.765855] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [238.765869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [238.765878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [238.765886] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [238.765915] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.765926] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.765936] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.766221] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [238.766432] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.766443] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.766915] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.767155] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.767559] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.767791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.767808] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [238.768053] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [238.770350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.770369] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [238.770620] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:550:HDMI-A-1] EDID changed, epoch counter 2
<7> [238.770775] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [238.770796] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [238.770813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [238.770822] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.770831] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.770840] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [238.770849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [238.770857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.771281] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [238.771295] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.771308] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.775672] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from connected to disconnected
<7> [238.775695] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.775714] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [238.775837] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [238.776087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.776098] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.780424] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [238.780994] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [238.783603] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [238.784667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [238.794174] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [238.794186] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [238.794304] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [238.794317] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [238.795376] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.796018] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.796325] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.796630] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.797034] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.797049] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.797057] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.797065] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [238.797073] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [238.797109] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [238.797397] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.797673] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.798639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [238.798651] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.798661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.798672] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [238.798683] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [238.799037] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [238.799054] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [238.799063] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [238.799388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [238.799398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [238.799406] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [238.799727] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [238.799737] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.799745] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.804153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.804164] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] enabled? yes
<7> [238.804175] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:DP-1] enabled? no
<7> [238.804183] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:532:DP-2] enabled? no
<7> [238.804191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [238.804199] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-1] enabled? no
<7> [238.804259] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [238.804292] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] found preferred mode: 1920x1200
<7> [238.804301] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [238.804334] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 1920x1200 set (0,0)
<7> [238.810705] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [238.811465] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:510:eDP-1] force updated from 0 to 0 or reprobing
<7> [238.811476] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [238.811485] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [238.812132] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.812625] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.812867] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.813162] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.813477] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.813486] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.813493] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.813499] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [238.813506] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [238.813528] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [238.813762] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.814029] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.814953] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [238.814963] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.814973] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.815029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [238.815038] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [238.815724] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.816372] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.816644] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.816923] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.817228] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.817237] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.817244] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.817250] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [238.817257] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [238.817280] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [238.817548] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.817815] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.818762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [238.818771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.818780] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.819000] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:510:eDP-1] EDID override reset
<7> [238.819039] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [238.819048] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [238.819720] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.820354] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.820621] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.820886] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.821257] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.821268] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.821276] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.821285] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [238.821293] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [238.821320] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [238.821586] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.821850] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.822795] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [238.822804] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.822812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.823042] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:519:DP-1] EDID override reset
<7> [238.823075] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [238.823084] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [238.823399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [238.823606] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:532:DP-2] EDID override reset
<7> [238.823638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [238.823646] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [238.823986] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [238.824196] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:541:DP-3] EDID override reset
<7> [238.824232] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [238.824241] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [238.824588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [238.824950] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [238.824962] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.824972] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.828947] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [238.829429] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [238.829859] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [238.830338] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.830389] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.830397] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.834711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.834875] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [238.834918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [238.834926] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [238.839233] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [238.841127] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [238.841393] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [238.844130] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [238.844473] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [238.852592] Console: switching to colour frame buffer device 240x75
Created at 2025-12-29 15:42:26