Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.31 seconds |
| Igt-Version |
IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4306-d981f0db217cc859e+ x86_64) |
| Out |
Using IGT_SRANDOM=1766826046 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.314s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.314s) |
| Dmesg |
<6> [90.945119] [IGT] xe_module_load: executing
<4> [90.945163] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [90.950868] [IGT] xe_module_load: starting subtest load
<6> [91.103859] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [91.103864] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [91.103866] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [91.103867] nvme 0000:05:00.0: [ 0] RxErr (First)
<5> [91.279929] Setting dangerous option force_probe - tainting kernel
<6> [91.283405] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [91.285139] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [91.285720] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [91.285728] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [91.285838] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [91.285931] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [91.286046] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [91.289135] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [91.289193] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [91.289194] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [91.289196] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [91.289197] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [91.289324] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [91.289462] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [91.289582] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [91.289906] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [91.290015] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [91.290118] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [91.290230] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [91.290333] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [91.290434] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [91.290740] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [91.290866] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [91.290978] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [91.291096] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [91.291402] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [91.291837] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [91.305699] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [91.305811] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [91.305919] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [91.306028] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [91.306136] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [91.306241] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [91.306342] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [91.306439] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [91.306532] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [91.306633] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [91.306735] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [91.306835] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [91.306932] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [91.307033] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [91.307127] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [91.307217] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [91.307309] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [91.307400] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [91.307495] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [91.307585] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [91.307676] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [91.307766] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [91.307853] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.307951] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [91.308058] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.308151] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [91.308241] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.308330] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.308417] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [91.308508] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [91.308839] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [91.308987] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [91.309340] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [91.309513] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [91.309891] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [91.309999] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [91.310304] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [91.310438] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [91.310764] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
<7> [91.310789] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [91.310908] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [91.311215] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [91.311313] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [91.312146] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [91.312931] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [91.313307] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [91.313431] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [91.313541] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [91.313644] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [91.313743] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [91.313840] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [91.313939] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [91.314042] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [91.314133] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [91.314219] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [91.314303] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [91.314385] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [91.314464] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [91.314542] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [91.314627] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [91.314710] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [91.314791] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [91.316089] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [91.316218] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [91.316326] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [91.316424] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [91.316518] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [91.316613] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [91.316712] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [91.316805] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [91.316897] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [91.316988] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [91.317101] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [91.317230] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [91.317338] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.317437] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [91.317538] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [91.317646] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [91.317740] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [91.317831] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [91.317921] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [91.318063] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [91.318155] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.318245] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [91.318337] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [91.318449] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [91.318551] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.318645] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [91.318742] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [91.318841] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [91.318931] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.319030] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [91.321861] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [91.329527] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [91.330649] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [91.330793] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [91.330909] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [91.331520] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [91.331671] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [91.332163] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [91.332282] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [91.332821] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [91.332960] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [91.333270] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [91.333377] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [91.333778] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [91.333878] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [91.334269] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [91.334436] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [91.334730] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [91.334842] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [91.335917] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [91.336074] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [91.336410] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [91.336537] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [91.336829] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [91.336916] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [91.337004] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [91.337299] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [91.337388] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [91.337476] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [91.337765] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [91.337855] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [91.337943] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [91.338557] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [91.338669] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [91.338773] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [91.339080] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [91.339174] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [91.339264] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [91.339558] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [91.339649] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [91.339739] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [91.340042] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [91.340177] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [91.340270] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [91.340567] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [91.340655] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [91.340744] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [91.341044] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [91.341132] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [91.341219] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [91.341305] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [91.341391] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [91.341681] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [91.341771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [91.341864] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [91.341954] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [91.342051] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [91.342341] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [91.342428] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [91.342512] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [91.342596] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [91.342679] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [91.342763] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [91.342847] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [91.342960] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [91.343111] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [91.343426] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [91.343519] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [91.343611] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [91.343899] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [91.344006] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-1] hw state readout: disabled
<7> [91.344118] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-1] hw state readout: disabled
<7> [91.344427] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-2] hw state readout: disabled
<7> [91.344529] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-2] hw state readout: disabled
<7> [91.344626] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-3] hw state readout: disabled
<7> [91.344923] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-3] hw state readout: disabled
<7> [91.345040] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-4] hw state readout: disabled
<7> [91.345133] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [91.345223] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [91.345310] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [91.345397] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [91.345490] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [91.345584] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [91.345678] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [91.345772] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [91.345862] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [91.345956] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [91.346060] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [91.346149] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [91.346235] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [91.346318] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [91.346401] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [91.346485] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [91.346575] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [91.346688] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [91.346789] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [91.346878] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [91.346958] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [91.347058] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [91.347140] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [91.347221] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [91.347302] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [91.347382] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [91.347469] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [91.347560] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [91.347855] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.347959] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.348065] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.348158] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.348247] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [91.348369] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [91.348478] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [91.348581] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [91.348905] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [91.349088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [91.349198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [91.349301] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [91.349411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [91.349552] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [91.354184] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [91.357412] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [91.357513] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [91.357598] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [91.357679] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [91.357755] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [91.357831] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [91.357908] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [91.357980] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [91.358078] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [91.358151] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [91.358222] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [91.358293] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [91.358364] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [91.358434] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [91.358505] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [91.358622] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [91.370040] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [91.370825] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [91.371073] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [91.371166] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [91.371250] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [91.371331] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [91.371412] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [91.456749] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [91.456751] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [91.456892] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [91.457000] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [91.457109] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [91.457196] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [91.457314] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [91.457430] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [91.457559] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [91.457637] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [91.457716] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [91.457794] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [91.457930] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [91.458023] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [91.458104] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [91.458178] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [91.459460] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [91.459537] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [91.459616] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [91.459692] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [91.459767] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [91.459842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [91.459919] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [91.460028] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [91.460120] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [91.460201] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [91.460278] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [91.460357] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [91.460432] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [91.460505] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [91.460576] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [91.460645] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [91.460713] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [91.460781] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [91.460850] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [91.460920] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [91.461003] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [91.461083] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [91.461157] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [91.461226] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [91.461294] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [91.461361] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [91.461443] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [91.461523] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [91.461603] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [91.461685] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [91.461761] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [91.461834] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [91.461907] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [91.461988] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [91.462075] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [91.462154] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [91.462229] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [91.462302] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [91.462379] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [91.462455] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [91.462531] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [91.462603] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [91.463072] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [91.463151] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [91.463225] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [91.463291] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [91.463587] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [91.463665] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [91.463742] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [91.463814] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [91.464269] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [91.464349] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [91.464422] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [91.464491] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [91.464561] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [91.464635] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [91.464709] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [91.465024] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [91.465103] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [91.465179] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [91.465256] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [91.465333] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [91.465406] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [91.465476] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [91.466005] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [91.470154] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [91.470240] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [91.470321] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [91.470395] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [91.470468] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [91.470542] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [91.470613] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [91.470680] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [91.470746] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [91.470811] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [91.470874] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [91.470938] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [91.471015] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [91.471085] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [91.471181] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [91.471342] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [91.473213] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [91.474725] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [91.475731] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [91.495501] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [91.506317] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [91.506633] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [91.507519] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [91.507668] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [91.507757] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [91.507839] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [91.507922] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [91.508016] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [91.508097] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [91.508180] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [91.508264] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [91.510986] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [91.511093] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [91.511182] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [91.513349] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [91.513452] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [91.517305] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [91.518582] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [91.521004] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [91.521153] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [91.521270] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [91.521380] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [91.521487] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [91.521593] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [91.521700] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [91.521808] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [91.521913] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [91.522050] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [91.522160] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [91.522269] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [91.522374] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [91.522477] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [91.524049] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [91.524581] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [91.524732] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [91.535974] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [91.536497] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [91.536744] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [91.536982] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [91.537193] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [91.537393] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [91.537581] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [91.537759] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [91.537762] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [91.537765] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [91.537767] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [91.537769] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [91.537771] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [91.537773] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [91.537776] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [91.537780] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [91.538218] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [91.538447] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [91.538666] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [91.538875] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [91.539133] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [91.539319] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [91.539494] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [91.539661] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [91.539820] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [91.539990] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [91.540338] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [91.540504] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [91.540660] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [91.540808] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [91.540957] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [91.541120] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [91.541257] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [91.541396] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [91.541526] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [91.541657] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [91.541921] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [91.542054] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [91.542177] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [91.542294] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [91.542418] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [91.542544] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [91.542664] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [91.542787] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [91.542900] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [91.543031] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [91.543266] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [91.543381] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [91.543498] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [91.543601] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [91.543713] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [91.543823] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [91.543930] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [91.544045] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [91.544146] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [91.544240] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [91.545593] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [91.545697] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [91.545798] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [91.545889] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [91.545992] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [91.546082] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [91.546166] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [91.546255] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [91.546340] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [91.546421] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [91.546505] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [91.546588] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [91.546667] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [91.546744] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [91.546818] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [91.546894] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [91.546972] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [91.547045] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [91.547115] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [91.547186] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [91.547259] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [91.547332] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [91.547405] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [91.547479] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [91.547553] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [91.547645] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [91.547733] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [91.547818] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [91.547901] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [91.547990] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [91.548071] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [91.548151] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [91.548230] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [91.548307] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [91.548384] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [91.548461] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [91.548676] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [91.548764] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [91.548846] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [91.548925] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [91.549013] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [91.549089] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [91.549165] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [91.549239] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [91.549320] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [91.549402] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [91.549479] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [91.549554] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [91.549756] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [91.549837] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [91.549913] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [91.550005] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [91.550087] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [91.550165] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [91.550241] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [91.550317] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [91.550391] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [91.550466] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [91.550544] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [91.550628] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [91.550841] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [91.550923] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [91.551011] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [91.551087] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [91.551160] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [91.551233] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [91.551305] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [91.551378] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [91.551449] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [91.551523] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [91.551602] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [91.551679] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [91.552105] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [91.555046] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [91.555138] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [91.555220] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [91.555300] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [91.555375] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [91.555450] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [91.555523] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [91.555595] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [91.555665] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [91.555735] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [91.555805] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [91.555877] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [91.555963] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [91.556041] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [91.556141] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [91.556241] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [91.557610] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [91.577107] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [91.587929] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [91.588279] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [91.588752] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [91.588854] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [91.590214] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [91.590309] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [91.601958] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [91.602382] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [91.602558] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [91.602712] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [91.602856] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [91.604405] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [91.604533] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [91.605075] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [91.605136] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [91.605254] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [91.605359] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [91.605456] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [91.606126] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [91.606266] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [91.606378] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [91.606478] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [91.606573] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [91.606665] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [91.606755] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [91.606843] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [91.606931] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [91.607037] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [91.607150] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [91.607240] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [91.607336] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [91.607432] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [91.607523] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [91.607612] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [91.607698] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [91.607785] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [91.607875] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [91.607983] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [91.608284] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [91.608423] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [91.608555] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [91.608671] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [91.608812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [91.608924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [91.609045] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [91.609164] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<7> [91.609924] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [91.610076] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [91.610594] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [91.610972] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [91.611122] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [91.611473] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [91.611627] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [91.612952] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [91.613212] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [91.613616] Creating 4 MTD partitions on "xe.nvm.768":
<5> [91.613635] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [91.614815] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-1] adding connector to sysfs
<7> [91.616501] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [91.618738] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-1] generating connector hotplug event
<7> [91.618816] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-1] adding connector to sysfs
<7> [91.619172] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-1] generating connector hotplug event
<7> [91.619224] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-2] adding connector to sysfs
<7> [91.620134] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<5> [91.620922] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [91.621172] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-2] generating connector hotplug event
<7> [91.621242] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-2] adding connector to sysfs
<7> [91.622076] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-2] generating connector hotplug event
<7> [91.622116] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-3] adding connector to sysfs
<7> [91.622462] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-3] generating connector hotplug event
<7> [91.622497] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-3] adding connector to sysfs
<7> [91.622913] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [91.624660] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-3] generating connector hotplug event
<7> [91.624744] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-4] adding connector to sysfs
<7> [91.625941] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-4] generating connector hotplug event
<5> [91.628536] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [91.634294] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [91.634461] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [91.634966] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [91.635075] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [91.635221] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [91.635323] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [91.637134] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [91.637659] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [91.637778] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [91.637878] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [91.637983] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [91.638084] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [91.638729] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [91.643136] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.643568] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [91.647990] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.648292] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [91.652687] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.653019] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [91.657460] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.657747] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [91.662241] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.662522] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [91.666917] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.667212] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [91.671396] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [91.671509] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [91.672050] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<6> [91.671966] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [91.672274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<6> [91.673567] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [91.673549] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [91.675833] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [91.677596] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [91.677631] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [91.677636] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<3> [91.679046] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [91.679070] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [91.679405] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [91.679450] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [91.681886] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [91.681894] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [91.681897] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [91.686053] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [91.686059] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [91.686063] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [91.690325] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [91.690330] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [91.690333] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [91.694516] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [91.694521] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [91.694524] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [91.698676] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [91.698681] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [91.698685] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [91.702813] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [91.702818] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [91.702826] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [91.702828] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [91.702831] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [91.702834] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [91.702836] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [91.702839] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [91.702841] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [91.702949] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [91.702966] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [91.703033] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [91.703049] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [91.704372] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [91.704343] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [91.704491] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [91.704584] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [91.704592] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [91.704607] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [91.704714] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [91.704814] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [91.704911] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [91.705021] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [91.705126] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [91.705235] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [91.705330] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [91.705435] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [91.705542] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [91.705646] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [91.705738] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [91.705831] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [91.705942] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [91.706058] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [91.706158] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [91.706254] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [91.706350] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [91.706454] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [91.706558] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [91.707951] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [91.708960] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [91.709098] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [91.709102] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [91.713253] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [91.713259] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [91.713263] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [91.717135] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [91.717375] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [91.717580] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [91.717788] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [91.718002] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [91.718011] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [91.718017] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [91.722280] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [91.722286] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [91.722290] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<6> [91.723682] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [91.724130] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [91.724379] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [91.724417] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [91.724684] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [91.724859] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [91.726492] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [91.726498] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [91.726502] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [91.726608] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [91.726822] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [91.727025] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [91.727219] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [91.727494] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [91.727590] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [91.727816] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [91.728069] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [91.728294] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [91.728499] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [91.728696] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [91.729020] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [91.729245] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [91.729455] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [91.729661] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [91.729863] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [91.730076] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [91.730212] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [91.730329] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [91.730438] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [91.730545] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [91.730650] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [91.730741] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [91.730748] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [91.730749] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [91.730753] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [91.730846] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [91.730947] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [91.731063] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [91.731206] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [91.731343] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [91.731497] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [91.731717] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [91.731915] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [91.732114] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [91.732299] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [91.732482] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [91.732665] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [91.732847] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [91.733040] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [91.733380] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [91.733704] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [91.734279] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [91.735013] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [91.735022] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [91.735032] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [91.735035] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [91.735038] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [91.735040] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [91.735044] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [91.735048] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [91.735052] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [91.735351] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [91.735369] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<6> [91.735371] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<7> [91.735427] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [91.735439] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [91.735469] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [91.736040] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [91.736053] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [91.736176] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [91.736270] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [91.736370] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<7> [91.737592] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [91.740092] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [91.740500] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [91.740503] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [91.740504] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [91.740506] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [91.740638] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [91.740788] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [91.740913] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [91.741225] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [91.741335] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [91.741679] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [91.741826] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [91.742016] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [91.742206] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [91.742613] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [91.742936] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [91.743172] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [91.743393] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<6> [91.743672] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<7> [91.743801] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [91.744611] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<6> [91.747459] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<6> [91.748734] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<6> [91.750826] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [91.750916] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [91.761238] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [91.761463] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [91.761654] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [91.761834] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [91.762026] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [91.762288] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [91.762468] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [91.762630] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [91.762806] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [91.763093] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [91.763263] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [91.763422] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [91.763620] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [91.763842] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [91.764024] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [91.764175] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [91.764372] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [91.764600] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [91.764811] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [91.765006] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [91.765166] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [91.765364] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [91.765549] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.765765] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [91.765943] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.766103] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [91.766244] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.766437] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [91.766640] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [91.766797] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [91.767210] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [91.767417] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [91.767806] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [91.780182] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [91.780453] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [91.780566] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [91.780869] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [91.781055] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [91.781483] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [91.781669] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [91.781856] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [91.782180] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [91.782710] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [91.783259] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [91.783393] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [91.783507] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [91.783613] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [91.783715] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [91.783815] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [91.783917] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [91.783948] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [91.784038] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [91.784136] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [91.784230] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [91.784320] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [91.784324] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [91.784410] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [91.784498] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.784491] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [91.784584] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [91.784610] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [91.784675] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [91.784708] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [91.784763] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [91.784801] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [91.784858] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [91.784891] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [91.784964] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [91.785054] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [91.785037] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [91.785141] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [91.785149] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [91.785227] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.785242] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [91.785311] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [91.785329] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [91.785406] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [91.785415] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [91.785500] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [91.785502] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [91.785591] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.785593] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [91.785679] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [91.785681] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [91.785764] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [91.785775] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [91.785848] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [91.785893] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [91.785940] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [91.786062] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [91.786163] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [91.790102] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [91.796670] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [91.799717] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [91.799867] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [91.800042] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [91.800646] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [91.800800] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [91.801272] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [91.801388] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [91.801813] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [91.801956] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [91.802258] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [91.802369] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [91.802764] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [91.802858] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [91.803264] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [91.803400] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [91.803692] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [91.803803] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [91.804339] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [91.804496] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [91.804837] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [91.805004] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [91.805297] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [91.805401] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [91.805506] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [91.805796] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [91.805895] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [91.806002] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [91.806287] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [91.806380] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [91.806471] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [91.806751] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [91.806843] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [91.806943] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [91.807228] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [91.807319] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [91.807408] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [91.807687] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [91.807777] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [91.807876] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [91.808171] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [91.808265] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [91.808355] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [91.808637] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [91.808730] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [91.808819] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [91.809113] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [91.809202] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [91.809286] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [91.809367] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [91.809447] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [91.809727] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [91.809807] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [91.809886] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [91.809975] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [91.810058] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [91.810336] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [91.810427] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [91.810507] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [91.810590] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [91.810678] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [91.810762] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [91.810845] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [91.810959] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [91.811061] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [91.811357] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [91.811460] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [91.811566] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [91.811866] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [91.812004] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-4] hw state readout: disabled
<7> [91.812323] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-5] hw state readout: disabled
<7> [91.812621] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-5] hw state readout: disabled
<7> [91.812726] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-6] hw state readout: disabled
<7> [91.812828] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-7] hw state readout: disabled
<7> [91.813127] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-6] hw state readout: disabled
<7> [91.813265] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-8] hw state readout: disabled
<7> [91.813383] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [91.813503] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [91.813625] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [91.813719] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [91.813809] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [91.813898] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [91.813999] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [91.814090] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [91.814177] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [91.814263] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [91.814356] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [91.814445] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [91.814531] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [91.814615] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [91.814696] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [91.814777] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [91.814858] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [91.814958] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [91.815047] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [91.815133] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [91.815218] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [91.815301] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [91.815381] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [91.815461] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [91.815550] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [91.815639] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [91.815723] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [91.815807] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [91.816097] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.816199] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.816295] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.816383] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [91.816467] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [91.816588] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [91.816702] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [91.816809] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [91.817156] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [91.817306] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [91.817414] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [91.817516] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [91.817616] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [91.817715] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [91.820997] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [91.824217] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [91.824321] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [91.824406] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [91.824488] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [91.824567] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [91.824646] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [91.824724] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [91.824802] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [91.824879] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [91.824968] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [91.825047] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [91.825124] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [91.825199] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [91.825271] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [91.825344] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [91.825468] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [91.836981] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [91.837749] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [91.837866] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [91.837968] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [91.838052] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [91.838131] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [91.838206] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [91.925029] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [91.925030] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [91.925142] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [91.925245] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [91.925339] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [91.925425] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [91.925538] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [91.925645] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [91.925769] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [91.925845] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [91.925935] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [91.926020] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [91.926159] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [91.926244] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [91.926341] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [91.926425] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [91.927821] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [91.927921] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [91.928019] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [91.928116] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [91.928216] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [91.928312] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [91.928407] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [91.928499] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [91.928587] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [91.928673] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [91.928768] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [91.928859] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [91.928958] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [91.929046] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [91.929130] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [91.929213] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [91.929294] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [91.929374] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [91.929457] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [91.929543] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [91.929628] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [91.929712] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [91.929796] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [91.929882] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [91.929981] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [91.930065] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [91.930156] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [91.930244] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [91.930332] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [91.930418] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [91.930498] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [91.930574] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [91.930652] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [91.930739] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [91.930823] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [91.930910] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [91.930993] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [91.931076] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [91.931164] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [91.931252] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [91.931344] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [91.931433] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [91.931783] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [91.931862] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [91.931949] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [91.932030] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [91.932385] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [91.932469] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [91.932550] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [91.932628] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [91.932979] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [91.933054] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [91.933129] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [91.933204] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [91.933284] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [91.933365] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [91.933442] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [91.933802] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [91.933886] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [91.933983] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [91.934062] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [91.934139] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [91.934213] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [91.934287] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [91.934857] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [91.939655] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [91.939747] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [91.939827] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [91.939910] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [91.939988] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [91.940062] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [91.940137] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [91.940212] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [91.940289] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [91.940363] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [91.940434] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [91.940504] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [91.940574] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [91.940643] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [91.940732] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [91.940833] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [91.943001] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [91.944227] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [91.946010] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [91.966561] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [91.977358] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [91.977764] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [91.978579] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [91.978679] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [91.978764] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [91.978844] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [91.978937] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [91.979021] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [91.979097] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [91.979174] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [91.979254] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [91.981699] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [91.981796] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [91.981883] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [91.984066] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [91.984156] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [91.987974] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [91.989292] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [91.992034] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [91.992192] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [91.992328] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [91.992459] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [91.992588] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [91.992717] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [91.992844] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [91.992981] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [91.993109] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [91.993236] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [91.993362] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [91.993488] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [91.993615] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [91.993741] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [91.994502] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [91.994999] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [91.995146] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [92.005929] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [92.006444] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [92.006668] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [92.006860] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [92.007097] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [92.007413] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [92.007621] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [92.007820] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [92.007823] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [92.007826] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [92.007828] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [92.007831] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [92.007833] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [92.007835] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [92.007838] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [92.007850] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [92.008598] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [92.008925] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [92.009215] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [92.009480] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [92.009756] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [92.010048] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [92.010305] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [92.010539] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [92.010760] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [92.011031] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [92.011568] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [92.011812] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [92.012115] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [92.012375] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [92.012636] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [92.012903] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [92.013157] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [92.013422] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [92.013689] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [92.013987] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [92.014210] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [92.014289] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [92.014373] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [92.014461] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [92.014549] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [92.014632] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [92.014713] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [92.014795] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [92.014879] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [92.014980] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [92.015160] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [92.015238] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [92.015319] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [92.015398] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [92.015487] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [92.015572] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [92.015654] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [92.015734] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [92.015813] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [92.015896] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [92.017085] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [92.017197] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [92.017306] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [92.017400] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [92.017492] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [92.017581] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [92.017670] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [92.017758] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [92.017842] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [92.017950] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [92.018050] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [92.018136] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [92.018216] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [92.018295] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [92.018373] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [92.018450] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [92.018526] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [92.018601] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [92.018677] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [92.018753] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [92.018827] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [92.018909] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [92.018988] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [92.019072] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [92.019151] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [92.019241] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [92.019328] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [92.019414] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [92.019493] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [92.019571] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [92.019649] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [92.019727] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [92.019802] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [92.019891] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [92.019974] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [92.020052] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [92.020347] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [92.020469] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [92.020572] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [92.020666] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [92.020751] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [92.020835] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [92.020933] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [92.021012] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [92.021088] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [92.021165] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [92.021241] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [92.021314] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [92.021539] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [92.021631] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [92.021717] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [92.021797] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [92.021874] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [92.021971] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [92.022049] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [92.022126] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [92.022206] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [92.022288] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [92.022366] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [92.022442] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [92.022669] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [92.022751] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [92.022828] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [92.022921] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [92.023002] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [92.023082] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [92.023159] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [92.023234] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [92.023308] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [92.023382] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [92.023459] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [92.023541] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [92.024012] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [92.027995] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [92.028105] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [92.028190] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [92.028269] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [92.028344] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [92.028417] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [92.028489] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [92.028561] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [92.028632] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [92.028702] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [92.028777] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [92.028852] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [92.028942] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [92.029015] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [92.029110] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [92.029214] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [92.030491] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [92.050646] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [92.061354] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [92.061758] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [92.062274] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [92.062381] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [92.063895] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [92.063990] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [92.076886] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [92.077496] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [92.077703] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [92.077902] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [92.078084] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<5> [92.083829] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [92.083850] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [92.089690] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [92.094029] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [92.102115] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [92.115240] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [92.120310] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [92.120272] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [92.120429] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [92.120696] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [92.120749] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [92.121072] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [92.121198] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [92.121370] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [92.122065] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [92.122226] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [92.122573] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [92.122866] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [92.123298] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [92.123519] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [92.123622] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [92.123983] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [92.124400] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [92.124526] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [92.124620] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [92.124689] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [92.124738] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [92.124836] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [92.124953] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [92.125048] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [92.125234] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [92.125488] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [92.125657] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [92.125778] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [92.125917] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [92.126684] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [92.127491] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [92.127632] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [92.127750] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [92.127906] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [92.128021] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [92.128156] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [92.128305] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<6> [92.128425] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [92.128764] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [92.128832] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [92.129035] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [92.129418] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [92.129639] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [92.129888] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [92.130126] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [92.130371] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [92.132049] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-4] adding connector to sysfs
<7> [92.132463] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [92.134501] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-4] generating connector hotplug event
<7> [92.134669] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-5] adding connector to sysfs
<7> [92.136189] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-5] generating connector hotplug event
<7> [92.136350] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-5] adding connector to sysfs
<7> [92.138278] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [92.140207] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-5] generating connector hotplug event
<7> [92.140334] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-6] adding connector to sysfs
<7> [92.141491] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-6] generating connector hotplug event
<7> [92.141589] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-7] adding connector to sysfs
<7> [92.142665] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-7] generating connector hotplug event
<7> [92.142756] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-6] adding connector to sysfs
<7> [92.144216] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [92.146397] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-6] generating connector hotplug event
<7> [92.146488] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-8] adding connector to sysfs
<7> [92.147230] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-8] generating connector hotplug event
<6> [92.147288] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [92.147380] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [92.147614] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [92.148963] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [92.149373] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [92.149485] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [92.149584] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [92.149678] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [92.149768] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [92.150016] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [92.153212] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.153343] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [92.157475] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.157583] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [92.161791] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.161912] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [92.166055] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.166163] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [92.170276] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.170390] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [92.174604] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.174724] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [92.178877] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [92.179133] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [92.179226] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4]
<7> [92.179232] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [92.183435] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected
<7> [92.183443] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5]
<7> [92.183446] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [92.187635] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected
<7> [92.187641] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5]
<7> [92.187644] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [92.191836] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected
<7> [92.191841] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6]
<7> [92.191844] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [92.196075] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected
<7> [92.196080] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7]
<7> [92.196083] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [92.200303] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected
<7> [92.200307] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6]
<7> [92.200310] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [92.204476] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected
<7> [92.204480] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8]
<7> [92.204483] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [92.208654] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected
<7> [92.208657] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [92.208661] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no
<7> [92.208664] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no
<7> [92.208667] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no
<7> [92.208669] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no
<7> [92.208671] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no
<7> [92.208674] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no
<7> [92.208676] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no
<7> [92.208698] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [92.208706] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [92.208747] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [92.208754] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [92.209672] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [92.209802] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [92.209925] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [92.210031] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [92.210129] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [92.210226] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [92.210321] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [92.210417] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [92.210511] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [92.210606] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [92.210698] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [92.210792] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [92.210902] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [92.211001] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [92.211096] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [92.211191] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [92.211283] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [92.211374] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [92.211464] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [92.211554] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [92.211644] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [92.211733] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [92.212198] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [92.212605] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4]
<7> [92.212612] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [92.216788] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected
<7> [92.216795] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5]
<7> [92.216799] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [92.221029] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected
<7> [92.221034] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5]
<7> [92.221037] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [92.225224] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected
<7> [92.225228] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6]
<7> [92.225231] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [92.227868] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [92.229396] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected
<7> [92.229400] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7]
<7> [92.229403] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<6> [92.230204] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [92.230991] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [92.231251] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [92.231294] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [92.231580] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [92.231719] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [92.233623] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected
<7> [92.233627] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6]
<7> [92.233630] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [92.233920] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [92.237181] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [92.237509] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [92.237693] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [92.239435] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [92.239635] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [92.239807] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [92.239998] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [92.240241] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [92.240516] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected
<7> [92.240524] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8]
<7> [92.240529] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [92.244751] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected
<7> [92.244757] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [92.244767] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no
<7> [92.244771] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no
<7> [92.244776] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no
<7> [92.244780] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no
<7> [92.244785] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no
<7> [92.244789] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no
<7> [92.244793] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no
<7> [92.244921] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [92.244934] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [92.244860] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [92.244985] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [92.244994] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [92.245016] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [92.244991] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [92.245024] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [92.245344] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [92.245707] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [92.246310] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [92.246925] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [92.247318] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [92.252013] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [92.264807] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [92.264887] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [92.265122] [IGT] xe_module_load: exiting, ret=0
|