Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4305-c09782d6b954f9a8b+ x86_64)
Out 
Using IGT_SRANDOM=1766822082 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.021s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.021s)
Dmesg
<6> [195.449060] Console: switching to colour dummy device 80x25
<6> [195.449119] [IGT] kms_force_connector_basic: executing
<7> [195.450780] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [195.450978] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [195.451126] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [195.451400] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:542:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [195.451409] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.451415] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.455619] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.455649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.455652] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.459838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.459857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.459860] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.464038] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<6> [195.464107] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [195.464396] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:542:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [195.464401] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.464405] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.464689] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [195.464803] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [195.465061] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [195.465160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [195.465172] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [195.465269] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [195.467530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [195.467538] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [195.467634] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] status updated from disconnected to connected
<7> [195.467651] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [195.467711] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [195.467788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] probed modes:
<7> [195.467793] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [195.467798] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [195.467803] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [195.467807] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [195.467811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [195.467838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.467842] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.468117] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [195.468214] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [195.468469] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [195.468564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [195.468572] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [195.468664] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [195.470923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [195.470930] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [195.471077] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] probed modes:
<7> [195.471081] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [195.471085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [195.471088] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [195.471091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [195.471094] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [195.471260] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:542:HDMI-A-1] EDID override set
<7> [195.471282] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.471286] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.471410] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:542:HDMI-A-1] ELD monitor IGT
<7> [195.471413] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:542:HDMI-A-1] ELD size 24, SAD count 0
<7> [195.471591] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [195.471686] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [195.471954] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [195.472049] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [195.472162] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [195.472169] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [195.472174] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] probed modes:
<7> [195.472178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [195.472181] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [195.472184] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [195.472188] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [195.472191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [195.472194] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [195.472311] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:542:HDMI-A-1] EDID override set
<7> [195.472330] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.472334] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.472460] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:542:HDMI-A-1] ELD monitor IGT
<7> [195.472462] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:542:HDMI-A-1] ELD size 24, SAD count 0
<7> [195.472465] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:542:HDMI-A-1] EDID changed, epoch counter 4
<7> [195.472644] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [195.472739] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [195.473000] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [195.473095] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [195.473187] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [195.473194] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] probed modes:
<7> [195.473197] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [195.473200] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [195.473203] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [195.473206] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [195.473209] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [195.473296] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:HDMI-A-1] EDID override reset
<7> [195.473316] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.473319] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.473581] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [195.473674] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [195.473939] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [195.474033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [195.474039] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [195.474131] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [195.476369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [195.476376] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [195.476469] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:542:HDMI-A-1] EDID changed, epoch counter 5
<7> [195.476521] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [195.476527] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [195.476532] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] probed modes:
<7> [195.476536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [195.476539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [195.476542] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [195.476545] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [195.476548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [195.476680] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:542:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [195.476684] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.476688] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.480858] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] status updated from connected to disconnected
<7> [195.480868] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.480876] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [195.480926] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [195.480965] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.480969] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.485105] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<6> [195.485180] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [195.485900] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [195.486034] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [195.486372] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [195.486377] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [195.486428] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1]
<7> [195.486434] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1]
<7> [195.486586] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected
<7> [195.486590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2]
<7> [195.486594] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2]
<7> [195.486736] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected
<7> [195.486740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3]
<7> [195.486753] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3]
<7> [195.486894] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected
<7> [195.486899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.486903] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.491051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.491057] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [195.491061] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no
<7> [195.491064] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no
<7> [195.491067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no
<7> [195.491070] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no
<7> [195.491090] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [195.491099] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [195.491486] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [195.491958] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:510:DP-1] EDID override reset
<7> [195.491978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1]
<7> [195.491982] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1]
<7> [195.492133] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected
<7> [195.492220] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:524:DP-2] EDID override reset
<7> [195.492234] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2]
<7> [195.492237] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2]
<7> [195.492381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected
<7> [195.492465] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-3] EDID override reset
<7> [195.492478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3]
<7> [195.492481] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3]
<7> [195.492620] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected
<7> [195.492784] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:542:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [195.492789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.492793] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.496959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.496982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.496986] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.501132] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.501216] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:HDMI-A-1] EDID override reset
<7> [195.501229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1]
<7> [195.501233] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1]
<7> [195.505370] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected
<7> [195.506183] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [195.506340] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [195.507575] Console: switching to colour frame buffer device 128x48
Created at 2025-12-27 08:14:15