Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

Detail	Value
Duration	4.97 seconds
Igt-Version	IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4303-f9f7782e4e188f3d6+ x86_64)
Out	Using IGT_SRANDOM=1766744299 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (4.969s)
Err	Starting subtest: load Subtest load: SUCCESS (4.969s)
Dmesg	<6> [171.639881] [IGT] xe_module_load: executing <4> [171.640019] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [171.652242] [IGT] xe_module_load: starting subtest load <5> [172.145741] Setting dangerous option force_probe - tainting kernel <6> [172.150413] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [172.152488] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode <6> [172.152961] xe 0000:00:02.0: [drm] Found pantherlake (device ID b083) integrated display version 30.00 stepping B0 <7> [172.152974] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] PANTHERLAKE b083:0004 dgfx:0 gfx:Xe3_LPG (30.00) media:Xe3_LPM (30.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [172.153161] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7> [172.153366] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [172.156320] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [172.156571] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [172.156786] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 1 (enabled) <7> [172.157004] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6fe5e018 <7> [172.157241] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [172.157458] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [172.157632] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [172.157810] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [172.157961] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [172.158139] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [172.158297] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [172.158503] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [172.158692] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [172.158900] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [172.159089] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [172.159295] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [172.159505] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [172.159779] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=7467 tRP=136 tRDPRE=88 tRAS=320 tRCD=136 tRC=456 <7> [172.159973] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [172.160165] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [172.160356] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=42130 peakbw: 102400 <7> [172.160598] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=45877 peakbw: 119472 <7> [172.160794] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [172.161010] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=47566 peakbw: 76800 <7> [172.161201] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=57825 peakbw: 102400 <7> [172.161386] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=64314 peakbw: 119472 <7> [172.161587] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [172.161794] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=56353 peakbw: 76800 <7> [172.161991] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [172.162189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [172.162377] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [172.162592] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=62087 peakbw: 76800 <7> [172.162774] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [172.162964] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [172.163139] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [172.163332] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [172.163531] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [172.163696] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [172.163855] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [172.164011] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [172.164176] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [172.164347] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [172.164563] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [172.165411] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [172.165609] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT PANTHERLAKE ", BDB version 266 <7> [172.165789] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [172.165956] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 445, min size 5) <7> [172.166116] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [172.166279] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [172.166433] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 862, min size 848) <7> [172.166645] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [172.166804] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [172.166987] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [172.167139] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [172.167284] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [172.167427] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [172.167802] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [172.167974] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [172.168143] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [172.168307] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [172.168472] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 266 not known; assuming 44 <7> [172.168613] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [172.168756] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [172.168894] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [172.169031] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [172.169175] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [172.169316] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [172.169453] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.169583] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [172.169712] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [172.169839] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [172.169972] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.170130] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [172.170339] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [172.170598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [172.170821] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [172.171053] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [172.171326] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [172.171535] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [172.171707] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [172.171889] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [172.172096] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6> [172.172270] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7> [172.172292] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [172.172528] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [172.172705] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [172.172883] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [172.173300] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [172.174045] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe3lpd_dmc.bin <7> [172.175311] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [172.175584] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [172.175770] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [172.175945] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 93 (93.0 usec) <7> [172.176112] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [172.176273] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 115 (115.0 usec) <7> [172.176429] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 115 (115.0 usec) <7> [172.176636] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 115 (115.0 usec) <7> [172.176795] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [172.176947] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 99 (99.0 usec) <7> [172.177094] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [172.177246] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 121 (121.0 usec) <7> [172.177394] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 121 (121.0 usec) <7> [172.177552] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 121 (121.0 usec) <7> [172.180130] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [172.180353] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [172.180623] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [172.180831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [172.181032] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f040 = 0xc003e200 (EVT_CTL) <7> [172.181232] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f010 = 0x4b444b18 (EVT_HTP) <7> [172.181425] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [172.181642] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f014 = 0x4d984cd4 (EVT_HTP) <7> [172.181847] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [172.182040] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [172.182230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f03c = 0xc0032b00 (EVT_CTL) (disabling) <7> [172.182419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f00c = 0x7e406c8 (EVT_HTP) <7> [172.182647] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [172.182835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f014 = 0x19e019a0 (EVT_HTP) <7> [172.183042] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [172.183230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [172.183448] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f43c = 0xc0032b00 (EVT_CTL) (disabling) <7> [172.183644] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f40c = 0x87e486c8 (EVT_HTP) <7> [172.183843] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [172.184023] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f414 = 0x99a89968 (EVT_HTP) <7> [172.184202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [172.184367] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [172.184568] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032b00 (EVT_CTL) (disabling) <7> [172.184728] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x27e426c8 (EVT_HTP) <7> [172.184884] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [172.185041] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f814 = 0x39a83968 (EVT_HTP) <7> [172.185205] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [172.185356] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5b7c0 <7> [172.185548] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032b00 (EVT_CTL) (disabling) <7> [172.185705] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x97e496c8 (EVT_HTP) <7> [172.185856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc44 = 0xc0033200 (EVT_CTL) (disabling) <7> [172.186004] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc14 = 0xa9a8a968 (EVT_HTP) <7> [172.186922] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <6> [172.191635] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe3lpd_dmc.bin (v2.32) <7> [172.196592] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [172.196822] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 691200 kHz <7> [172.197039] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1382400 kHz <7> [172.197274] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI A/PHY A] Using AUX CH A (VBT) <7> [172.197584] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:509:DDI A/PHY A] <7> [172.197884] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [172.198095] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [172.198303] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [172.198648] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [172.198877] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [172.199075] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [172.199275] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [172.199505] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [172.199716] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [172.199976] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:509:DDI A/PHY A] initial power sequencer: PPS 0 <7> [172.200223] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [172.200465] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [172.200663] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [172.200859] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [172.201051] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [172.201287] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [172.201534] xe 0000:00:02.0: [drm:pps_vdd_init [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 VDD left on by BIOS, adjusting state tracking <7> [172.201727] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [172.267449] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.327443] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.387442] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.447441] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.507439] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.567439] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.627437] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.687436] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.747434] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.807431] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.867432] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.927431] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [172.987428] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.047428] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.107427] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.167425] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.227423] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.287423] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.347420] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.407420] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.467418] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.527417] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.587416] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.647415] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.707414] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.767412] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.827410] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.887410] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [173.947409] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.007406] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.067405] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.127404] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.127541] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <7> [174.187405] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.247401] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.307400] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.367399] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.427398] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.487396] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.547395] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.607393] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.667393] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.727390] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.787389] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.847389] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.907389] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [174.967386] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.027384] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.087383] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.147382] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.207380] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.267379] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.327378] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.387377] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.447375] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.507375] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.567373] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.627372] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.687370] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.747369] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.807368] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.867368] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.927366] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [175.987364] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [176.047363] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [176.047497] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [176.047514] xe 0000:00:02.0: [drm] [ENCODER:509:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [176.047527] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 turning VDD off <7> [176.047702] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [176.047834] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [176.048268] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [176.048552] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [176.048735] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:509:DDI TC1/PHY TC1] <7> [176.049204] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:523:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [176.049364] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [176.049520] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:523:DDI TC2/PHY TC2] <7> [176.049813] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:532:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [176.049970] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [176.050129] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:532:DDI TC3/PHY TC3] <7> [176.050453] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [176.050619] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7> [176.050972] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [176.051103] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY TC4] <7> [176.051240] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using DDC pin 0xc (VBT) <7> [176.051765] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [176.051921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [176.052072] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [176.052221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] hw state readout: disabled <7> [176.052337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [176.052462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [176.052579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [176.052693] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [176.052805] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [176.052917] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [176.053024] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [176.053129] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [176.053234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [176.053340] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [176.053459] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [176.053567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [176.053666] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [176.053773] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [176.053868] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [176.053959] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [176.054049] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [176.054138] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [176.054233] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] hw state readout: disabled, pipe D <7> [176.054334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] hw state readout: disabled, pipe D <7> [176.054437] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] hw state readout: disabled, pipe D <7> [176.054522] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] hw state readout: disabled, pipe D <7> [176.054608] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] hw state readout: disabled, pipe D <7> [176.054692] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] hw state readout: disabled, pipe D <7> [176.054783] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [176.054900] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [176.055006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST A] hw state readout: disabled, pipe A <7> [176.055097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST B] hw state readout: disabled, pipe B <7> [176.055187] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:513:DP-MST C] hw state readout: disabled, pipe C <7> [176.055278] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:514:DP-MST D] hw state readout: disabled, pipe D <7> [176.055370] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [176.055469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:523:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [176.055564] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DP-MST A] hw state readout: disabled, pipe A <7> [176.055673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST B] hw state readout: disabled, pipe B <7> [176.055773] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST C] hw state readout: disabled, pipe C <7> [176.055872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST D] hw state readout: disabled, pipe D <7> [176.055966] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [176.056070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:532:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [176.056159] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7> [176.056249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7> [176.056335] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7> [176.056431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7> [176.056706] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [176.056829] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [176.056926] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [176.057045] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [176.057174] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [176.057302] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [176.057429] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [176.057541] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [176.057652] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [176.057773] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:510:DP-1] hw state readout: disabled <7> [176.057883] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:524:DP-2] hw state readout: disabled <7> [176.057983] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:DP-3] hw state readout: disabled <7> [176.058080] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:HDMI-A-1] hw state readout: disabled <7> [176.058173] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [176.058263] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [176.058377] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [176.058472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [176.058562] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [176.058652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [176.058743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [176.058833] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [176.058923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [176.059012] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [176.059102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [176.059185] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [176.059266] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [176.059346] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [176.059442] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [176.059519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [176.059595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [176.059669] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [176.059743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [176.059817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [176.059890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [176.059964] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] min_cdclk 0 kHz <7> [176.060037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] min_cdclk 0 kHz <7> [176.060109] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] min_cdclk 0 kHz <7> [176.060181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] min_cdclk 0 kHz <7> [176.060254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] min_cdclk 0 kHz <7> [176.060326] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] min_cdclk 0 kHz <7> [176.060410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] min_cdclk 0 kHz <7> [176.060487] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [176.060588] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [176.060687] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [176.060780] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:506:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [176.060874] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [176.061004] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [176.061131] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [176.061256] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [176.061431] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [176.061631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [176.061775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [176.061912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [176.062047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [setup_hw_state] <7> [176.062171] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [176.066898] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [176.069582] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [176.069703] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [176.069804] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [176.069894] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [176.069985] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [176.070076] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [176.070152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [176.070240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [176.070314] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [176.070402] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [176.070478] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [176.070548] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [176.070617] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [176.070686] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [176.070756] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [176.070902] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [176.082623] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [176.083494] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [176.083749] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000efe <7> [176.083850] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000efe <7> [176.083940] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [176.084024] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [176.084103] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 0000000f,0000000f <6> [176.281717] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [176.281721] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [176.281723] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [176.281881] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [176.282020] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7> [176.282155] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7> [176.282282] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [176.282445] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [176.282555] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [176.282711] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [176.282854] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [176.283004] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [176.283096] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [176.283189] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [176.283280] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [176.284497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [176.284601] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [176.284714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [176.284817] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [176.284916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [176.285013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [176.285109] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xc50c] = 0x00010002 <7> [176.285206] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [176.285308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [176.285414] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [176.285511] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [176.285607] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [176.285700] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [176.285793] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [176.285885] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [176.285975] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [176.286065] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [176.286155] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [176.286246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [176.286336] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [176.286440] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [176.286529] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [176.286620] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [176.286708] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [176.286795] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [176.286884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [176.286966] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [176.287050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [176.287130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0x00800080 <7> [176.287210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7> [176.287286] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7> [176.287364] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7> [176.287436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7> [176.287509] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7> [176.287584] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [176.287661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [176.287740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [176.287823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [176.287903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe5f4] = 0x10001000 <7> [176.288261] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [176.288333] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [176.288427] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [176.288497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [176.288569] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0x00800080 <7> [176.288901] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [176.288973] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [176.289052] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [176.289124] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [176.289195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0x00800080 <7> [176.289521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [176.289593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [176.289670] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [176.289741] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [176.289812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0x00800080 <7> [176.289883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [176.289951] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [176.290019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [176.290577] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [176.290729] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [176.290829] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [176.290920] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [176.291007] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [176.291091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [176.291170] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [176.291247] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [176.291322] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [176.291411] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [176.291485] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [176.291557] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [176.291629] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [176.291708] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [176.291781] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [176.291878] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [176.292041] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [176.294853] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe1e000 for xe_guc_buf_cache_init_with_size [xe] <7> [176.297832] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 60 ext-regs. <7> [176.317323] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [176.328500] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [176.328890] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [176.330074] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4103 dwords <7> [176.330240] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [176.330370] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000 <7> [176.330468] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x731c] = 0x20002000 <7> [176.330560] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [176.333670] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [176.333814] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [176.333934] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [176.335946] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [176.336082] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <6> [176.340816] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [176.345222] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [176.345416] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [176.345558] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [176.345679] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [176.345788] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [176.345892] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [176.346006] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [176.346110] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [176.346220] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [176.346324] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [176.346462] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [176.346565] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [176.346666] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [176.346772] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [176.348799] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/ptl_huc.bin version 10.3.3 <7> [176.349642] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [176.349844] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [176.370497] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [176.371163] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [176.371608] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [176.371937] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [176.372208] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [176.372489] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <6> [176.372731] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [176.372735] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [176.372739] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [176.372742] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [176.372745] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [176.372748] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [176.372750] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [176.372753] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [176.372756] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [176.372759] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [176.372764] xe 0000:00:02.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs <7> [176.373442] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [176.373833] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [176.374226] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [176.374627] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [176.375029] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [176.375388] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [176.375738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [176.376093] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [176.376435] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [176.376743] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [176.377313] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [176.377671] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [176.377989] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [176.378286] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [176.378573] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [176.378824] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [176.379094] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [176.379377] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [176.379628] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [176.379860] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [176.381768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [176.381962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [176.382158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [176.382357] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [176.382535] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [176.382708] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [176.382894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [176.383069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [176.383269] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [176.383502] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [176.383728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [176.383912] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [176.384083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [176.384269] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [176.384467] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [176.384617] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [176.384769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [176.384929] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [176.385077] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [176.385223] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [176.385373] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [176.385508] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [176.385638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [176.385764] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [176.385895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [176.386021] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [176.386148] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [176.386303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [176.386480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [176.386627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [176.386775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [176.386910] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [176.387046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [176.387189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [176.387320] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [176.387470] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [176.387634] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [176.388247] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [176.388415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [176.388558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [176.388671] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [176.388797] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [176.388912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [176.389019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [176.389119] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [176.389217] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [176.389315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [176.389428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [176.390162] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [176.390337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [176.390501] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [176.390638] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [176.390766] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [176.390880] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [176.390989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [176.391091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [176.391189] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [176.391283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [176.391381] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [176.391468] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [176.391554] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [176.391638] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [176.391720] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [176.391826] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [176.391942] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [176.395599] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2161000 for xe_guc_buf_cache_init_with_size [xe] <7> [176.415776] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056) <7> [176.437078] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [176.437569] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [176.439047] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [176.439275] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [176.442974] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [176.443239] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [176.487089] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [176.488199] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [176.488707] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [176.489158] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [176.489558] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [176.490286] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [176.490650] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [176.491156] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [176.492966] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [176.493597] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [176.494089] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [176.494588] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [176.495155] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [176.495607] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [176.496022] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [176.496430] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [176.496815] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [176.497272] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [176.497688] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [176.498288] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [176.498686] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [176.499037] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [176.499400] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [176.499941] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 0: start 0x59008 <7> [176.500292] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 1: start 0x59108 <7> [176.500789] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 2: start 0x59208 <7> [176.501129] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 3: start 0x59308 <7> [176.501506] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 4: start 0x593c8 <7> [176.502408] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [176.502885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [176.503393] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [176.503814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400 <7> [176.504261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400 <7> [176.504711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [176.505181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [176.505579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [176.505989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [176.506370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [fastset] <7> [176.506993] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff3032 0x2b432a01) <7> [176.507762] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [176.508226] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [176.508619] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [176.508975] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [176.509326] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:506:pipe D] <7> [176.509701] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800000 0x2b400001) <7> [176.514295] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:510:DP-1] adding connector to sysfs <7> [176.515663] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [176.517337] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:510:DP-1] generating connector hotplug event <7> [176.517414] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:524:DP-2] adding connector to sysfs <7> [176.517935] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [176.519217] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:524:DP-2] generating connector hotplug event <7> [176.519287] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-3] adding connector to sysfs <7> [176.521206] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [176.522822] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-3] generating connector hotplug event <7> [176.522911] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-1] adding connector to sysfs <7> [176.524369] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-1] generating connector hotplug event <6> [176.537422] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [176.537647] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [176.549872] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [176.565362] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7> [176.567761] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [176.568063] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1728 <7> [176.569529] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [176.569537] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [176.571212] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [176.571268] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [176.571882] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [176.572087] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [176.572377] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [176.572620] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [176.572847] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:506:pipe D] not active, skipping <7> [176.573107] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [176.573473] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [176.573899] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:510:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.574236] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [176.574615] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [176.574640] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [176.574963] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:524:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.575281] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [176.575679] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [176.575994] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.576310] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [176.576555] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7> [176.577418] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [176.580799] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [176.580836] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [176.581790] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.582029] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [176.582293] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [176.582320] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [176.582764] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [176.583130] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [176.583135] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [176.583324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [176.583329] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [176.583333] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [176.583519] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [176.583525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [176.583530] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [176.587748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [176.587758] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [176.587769] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [176.587773] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [176.587776] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [176.587778] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [176.588028] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [176.588057] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [176.588123] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [176.588136] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [176.589584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 30 <7> [176.589712] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [176.589807] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [176.589999] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [176.590179] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [176.590359] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [176.590529] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [176.590693] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [176.590896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [176.590853] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [176.590917] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [176.591012] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [176.591160] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [176.591314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [176.591324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [176.591301] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [176.591329] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [176.591454] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [176.591542] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [176.591548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [176.591552] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [176.591595] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [176.591740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [176.591746] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [176.591735] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [176.591750] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [176.591874] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [176.592025] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [176.592183] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [176.592348] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [176.592506] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [176.592665] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [176.592823] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [176.593150] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [176.594598] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [176.594864] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [176.595072] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [176.595260] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [176.595434] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [176.595596] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [176.595754] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [176.596088] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [176.596098] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [176.596501] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [176.596506] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [176.596510] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [176.596514] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [176.596734] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [176.596788] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [176.596874] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [176.596886] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [176.597458] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [176.618496] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [176.621377] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [176.621512] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [176.621864] [IGT] xe_module_load: exiting, ret=0

Created at 2025-12-26 10:31:10