Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

Detail	Value
Duration	1.29 seconds
Igt-Version	IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4303-f9f7782e4e188f3d6+ x86_64)
Out	Using IGT_SRANDOM=1766744323 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.291s)
Err	Starting subtest: load Subtest load: SUCCESS (1.291s)
Dmesg	<6> [180.735297] [IGT] xe_module_load: executing <4> [180.735347] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [180.739706] [IGT] xe_module_load: starting subtest load <6> [180.901895] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0 <4> [180.901902] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [180.901904] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [180.901905] nvme 0000:05:00.0: [ 0] RxErr (First) <6> [180.902511] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0 <4> [180.902518] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID) <4> [180.902519] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001000/00002000 <4> [180.902521] pcieport 0000:00:06.0: [12] Timeout <6> [180.904500] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0 (no details found <6> [180.904505] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:00:06.0 <4> [180.904506] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID) <4> [180.904507] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001100/00002000 <4> [180.904508] pcieport 0000:00:06.0: [ 8] Rollover <4> [180.904510] pcieport 0000:00:06.0: [12] Timeout <6> [181.006874] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0 <4> [181.006879] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [181.006880] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [181.006882] nvme 0000:05:00.0: [ 0] RxErr (First) <6> [181.015770] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [181.015773] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [181.015774] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [181.015776] nvme 0000:05:00.0: [ 0] RxErr (First) <5> [181.067734] Setting dangerous option force_probe - tainting kernel <6> [181.071017] xe 0000:03:00.0: vgaarb: deactivate vga console <6> [181.072659] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode <6> [181.073186] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0 <7> [181.073196] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1 <7> [181.073307] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:) <7> [181.073409] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [181.073512] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present <6> [181.076418] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000 <6> [181.076446] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000 <6> [181.076447] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000] <6> [181.076449] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000 <6> [181.076450] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000] <7> [181.076574] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes <7> [181.076713] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display <7> [181.076841] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [181.077182] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0 <7> [181.077314] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported! <7> [181.077621] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR <7> [181.077731] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6 <7> [181.077837] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2 <7> [181.077938] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [181.078252] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0 <7> [181.078375] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0 <7> [181.078481] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000 <7> [181.078580] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000 <7> [181.078880] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [181.079269] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [181.092903] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash <7> [181.093025] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257 <7> [181.093169] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [181.093285] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [181.093387] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [181.093488] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [181.093592] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848) <7> [181.093690] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [181.093799] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [181.093901] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [181.093998] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366) <7> [181.094100] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [181.094210] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [181.094305] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [181.094403] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [181.094497] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [181.094590] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [181.094681] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6 <7> [181.094774] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6 <7> [181.094866] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [181.094964] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6 <7> [181.095063] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [181.095159] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.095251] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000 <7> [181.095340] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.095433] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000 <7> [181.095526] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.095614] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.095701] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000 <7> [181.095791] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a <7> [181.096126] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [181.096287] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [181.096616] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [181.096814] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [181.097202] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [181.097304] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [181.097601] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [181.097726] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6> [181.097835] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none <7> [181.097861] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [181.098192] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [181.098307] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [181.098629] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [181.099525] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin <7> [181.100329] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [181.100682] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us <7> [181.100795] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec) <7> [181.100897] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec) <7> [181.100990] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec) <7> [181.101079] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec) <7> [181.101179] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec) <7> [181.101267] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec) <7> [181.101355] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided <7> [181.101445] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided <7> [181.101534] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec) <7> [181.101623] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec) <7> [181.101718] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec) <7> [181.101810] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec) <7> [181.101902] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec) <7> [181.101990] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec) <7> [181.102076] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided <7> [181.102170] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided <7> [181.103662] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [181.103827] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [181.103983] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [181.104152] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP) <7> [181.104299] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7> [181.104432] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP) <7> [181.104553] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [181.104685] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0 <7> [181.104822] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7> [181.104961] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP) <7> [181.105094] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7> [181.105232] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP) <7> [181.105356] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.105479] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP) <7> [181.105622] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [181.105768] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0 <7> [181.105902] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7> [181.106032] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP) <7> [181.106160] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7> [181.106301] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP) <7> [181.106435] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.106564] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP) <7> [181.106679] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [181.106799] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0 <7> [181.106903] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.107023] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP) <7> [181.107161] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [181.107307] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0 <7> [181.107447] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.107573] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP) <7> [181.114350] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <6> [181.118119] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6) <7> [181.122977] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [181.123114] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [181.123275] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [181.123614] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT) <7> [181.123755] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F] <7> [181.124276] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F] <7> [181.124395] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT) <7> [181.125014] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT) <7> [181.125159] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G] <7> [181.125468] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G] <7> [181.125569] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT) <7> [181.125968] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H] <7> [181.126064] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT) <7> [181.126449] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT) <7> [181.126574] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I] <7> [181.126848] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I] <7> [181.126951] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT) <7> [181.127523] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [181.127665] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled <7> [181.127997] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled <7> [181.128128] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled <7> [181.128438] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [181.128529] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [181.128620] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [181.128912] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [181.129002] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [181.129098] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [181.129404] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7> [181.129498] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7> [181.129583] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7> [181.129871] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7> [181.129956] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7> [181.130041] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7> [181.130336] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7> [181.130420] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7> [181.130503] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7> [181.130785] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7> [181.130866] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7> [181.130949] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7> [181.131250] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D <7> [181.131343] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D <7> [181.131433] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D <7> [181.131726] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D <7> [181.131812] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D <7> [181.131897] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D <7> [181.132190] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A <7> [181.132271] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A <7> [181.132352] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B <7> [181.132438] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C <7> [181.132527] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D <7> [181.132816] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A <7> [181.132900] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A <7> [181.132981] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B <7> [181.133062] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C <7> [181.133151] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D <7> [181.133453] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A <7> [181.133546] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A <7> [181.133633] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A <7> [181.133716] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B <7> [181.133799] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C <7> [181.133881] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D <7> [181.133964] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [181.134074] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [181.134187] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [181.134491] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [181.134584] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [181.134676] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [181.134973] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [181.135076] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-1] hw state readout: disabled <7> [181.135413] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-1] hw state readout: disabled <7> [181.135518] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-2] hw state readout: disabled <7> [181.135614] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-2] hw state readout: disabled <7> [181.135911] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-3] hw state readout: disabled <7> [181.135999] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-3] hw state readout: disabled <7> [181.136086] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-4] hw state readout: disabled <7> [181.136180] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [181.136266] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [181.136348] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [181.136430] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [181.136512] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [181.136601] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [181.136689] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [181.136774] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7> [181.136857] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7> [181.136937] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7> [181.137018] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7> [181.137099] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7> [181.137210] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7> [181.137293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz <7> [181.137373] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7> [181.137454] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7> [181.137541] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7> [181.137628] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7> [181.137714] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7> [181.137797] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7> [181.137879] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz <7> [181.137962] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz <7> [181.138042] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz <7> [181.138129] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz <7> [181.138231] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz <7> [181.138315] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz <7> [181.138396] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz <7> [181.138475] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz <7> [181.138762] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.138864] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.138961] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.139051] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.139145] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [181.139267] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [181.139378] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [181.139486] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [181.139816] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no <7> [181.139998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [181.140111] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7> [181.140229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7> [181.140329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state] <7> [181.140425] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [181.145003] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3 <7> [181.148243] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7 <7> [181.148345] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [181.148432] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [181.148516] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [181.148595] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8 <7> [181.148673] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000 <7> [181.148752] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [181.148833] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [181.148911] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [181.148986] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [181.149061] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [181.149141] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [181.149213] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [181.149285] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [181.149358] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K <7> [181.149474] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [181.160186] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034 <7> [181.160959] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [181.161206] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff <7> [181.161302] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff <7> [181.161390] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [181.161473] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [181.161551] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff <6> [181.247490] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off <6> [181.247492] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off <7> [181.247630] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [181.247735] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [181.247833] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [181.247922] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [181.248040] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [181.248166] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [181.248308] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [181.248394] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [181.248480] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [181.248563] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [181.248690] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine <7> [181.248767] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [181.248847] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [181.248927] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [181.250213] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [181.250301] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [181.250387] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [181.250468] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440 <7> [181.250547] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [181.250627] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [181.250712] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [181.250795] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [181.250877] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [181.250956] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [181.251034] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [181.251110] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [181.251198] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [181.251281] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [181.251363] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [181.251440] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [181.251514] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [181.251586] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [181.251656] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [181.251724] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [181.251794] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [181.251863] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [181.251932] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [181.252001] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [181.252070] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [181.252151] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [181.252246] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [181.252333] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [181.252416] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [181.252495] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [181.252569] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [181.252641] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [181.252714] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [181.252789] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [181.252863] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [181.252936] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [181.253015] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040 <7> [181.253091] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [181.253181] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [181.253266] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000 <7> [181.253346] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [181.253422] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002 <7> [181.253730] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [181.253810] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [181.253883] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [181.253955] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [181.254435] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [181.254515] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [181.254589] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [181.254657] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [181.254945] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [181.255024] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [181.255100] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308 <7> [181.255187] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [181.255271] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [181.255352] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [181.255425] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [181.255895] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs <7> [181.255973] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000 <7> [181.256050] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308 <7> [181.256123] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080 <7> [181.256221] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc <7> [181.256304] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01 <7> [181.256390] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c <7> [181.256929] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [181.261489] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7 <7> [181.261576] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [181.261658] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [181.261737] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [181.261813] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328 <7> [181.261884] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000 <7> [181.261954] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [181.262020] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [181.262087] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [181.262172] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [181.262246] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [181.262318] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [181.262390] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [181.262460] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [181.262553] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [181.262710] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [181.264770] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe] <7> [181.266382] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000 <7> [181.267384] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs. <7> [181.286736] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [181.297542] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034 <7> [181.297849] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [181.298859] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [181.298983] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [181.299067] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140 <7> [181.299154] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [181.299237] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [181.299318] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [181.299396] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000 <7> [181.299474] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [181.299556] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000\|0x3f18000 <7> [181.302277] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [181.302385] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [181.302474] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01 <7> [181.304374] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [181.304465] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01 <7> [181.308547] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2 <6> [181.309791] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3 <7> [181.311958] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7 <7> [181.312056] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [181.312198] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [181.312280] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [181.312358] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a <7> [181.312434] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000 <7> [181.312507] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [181.312581] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [181.312653] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [181.312728] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [181.312805] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [181.312881] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [181.312955] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [181.313028] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [181.314498] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10 <7> [181.314977] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K <7> [181.315105] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [181.326141] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034 <7> [181.326488] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [181.326597] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00 <7> [181.326688] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00 <7> [181.326777] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff <7> [181.326861] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [181.326943] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000 <6> [181.327028] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off <6> [181.327030] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off <6> [181.327031] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off <6> [181.327032] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off <6> [181.327033] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off <6> [181.327034] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off <6> [181.327035] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off <6> [181.327036] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off <7> [181.327040] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs <7> [181.327251] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [181.327359] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.327468] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.327571] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.327665] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.327752] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.327839] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.327925] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.328007] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.328088] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.328279] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine <7> [181.328363] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.328448] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.328531] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.328613] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.328692] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.328769] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.328848] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.328926] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.329005] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.329180] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [181.329255] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.329336] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.329421] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.329508] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.329588] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.329669] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.329752] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.329830] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.329915] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.330093] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine <7> [181.330187] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.330274] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.330355] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.330441] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.330527] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.330611] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.330693] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.330771] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.330849] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.332083] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [181.332179] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [181.332266] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [181.332354] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008 <7> [181.332440] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020 <7> [181.332519] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008 <7> [181.332605] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [181.332693] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [181.332777] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [181.332859] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [181.332939] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [181.333014] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [181.333093] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [181.333185] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [181.333264] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [181.333341] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [181.333414] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [181.333486] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [181.333556] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [181.333626] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [181.333697] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [181.333768] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [181.333840] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [181.333917] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [181.333994] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [181.334086] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [181.334183] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [181.334267] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [181.334347] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [181.334426] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [181.334508] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [181.334592] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [181.334671] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [181.334748] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [181.334825] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [181.334907] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [181.335126] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs <7> [181.335222] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000 <7> [181.335301] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000 <7> [181.335377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c <7> [181.335451] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1 <7> [181.335525] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0 <7> [181.335599] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c <7> [181.335670] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1 <7> [181.335741] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0 <7> [181.335817] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c <7> [181.335895] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1 <7> [181.335969] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0 <7> [181.336171] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [181.336249] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [181.336323] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [181.336397] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [181.336468] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [181.336540] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [181.336609] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [181.336679] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [181.336748] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [181.336816] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [181.336886] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [181.336961] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [181.337181] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs <7> [181.337260] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000 <7> [181.337335] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000 <7> [181.337409] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c <7> [181.337481] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1 <7> [181.337551] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0 <7> [181.337622] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c <7> [181.337693] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1 <7> [181.337770] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0 <7> [181.337847] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c <7> [181.337921] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1 <7> [181.337995] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0 <7> [181.338433] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [181.341343] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7 <7> [181.341436] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [181.341524] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [181.341608] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [181.341688] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa <7> [181.341769] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000 <7> [181.341848] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [181.341925] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [181.342001] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [181.342075] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [181.342158] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [181.342278] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [181.342370] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [181.342450] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [181.342545] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [181.342645] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [181.343917] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe] <7> [181.363733] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056) <7> [181.374568] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034 <7> [181.374877] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [181.375390] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [181.375485] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01 <7> [181.376999] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [181.377090] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01 <7> [181.389139] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [181.389564] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.389744] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.389898] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.390045] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.391638] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7 <7> [181.391770] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin <6> [181.392203] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0 <7> [181.392262] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1 <7> [181.392382] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [181.392488] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [181.392585] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1 <7> [181.393186] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [181.393313] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [181.393418] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [181.393516] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [181.393611] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [181.393708] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008 <7> [181.393809] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108 <7> [181.393903] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208 <7> [181.393992] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308 <7> [181.394078] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8 <7> [181.394172] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008 <7> [181.394262] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108 <7> [181.394348] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208 <7> [181.394451] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308 <7> [181.394553] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8 <7> [181.394654] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008 <7> [181.394748] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108 <7> [181.394843] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208 <7> [181.394934] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308 <7> [181.395027] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8 <7> [181.395319] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [181.395457] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [181.395581] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [181.395696] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [181.395835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [181.395947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset] <7> [181.396058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset] <7> [181.396174] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset] <7> [181.396935] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71) <7> [181.397745] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [181.397965] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [181.398165] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [181.398416] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C] <7> [181.398609] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D] <7> [181.398776] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.398864] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071) <7> [181.399084] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix <5> [181.401419] Creating 4 MTD partitions on "xe.nvm.768": <5> [181.401441] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR" <7> [181.403157] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-1] adding connector to sysfs <7> [181.404928] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1 <7> [181.407308] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-1] generating connector hotplug event <7> [181.407434] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-1] adding connector to sysfs <7> [181.407912] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-1] generating connector hotplug event <7> [181.407952] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-2] adding connector to sysfs <7> [181.408441] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2 <5> [181.408578] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC" <7> [181.409612] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-2] generating connector hotplug event <7> [181.409667] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-2] adding connector to sysfs <7> [181.410087] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-2] generating connector hotplug event <7> [181.410150] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-3] adding connector to sysfs <7> [181.410549] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-3] generating connector hotplug event <7> [181.410599] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-3] adding connector to sysfs <7> [181.411339] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3 <7> [181.412649] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-3] generating connector hotplug event <7> [181.412714] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-4] adding connector to sysfs <7> [181.413290] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-4] generating connector hotplug event <5> [181.416381] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM" <6> [181.417968] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe]) <7> [181.418463] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.418830] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix <5> [181.420926] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM" <7> [181.421694] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.422165] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix <6> [181.422174] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0 <7> [181.422190] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [181.422549] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632 <7> [181.424562] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [181.425122] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [181.425377] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping <7> [181.425528] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping <7> [181.425660] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping <7> [181.425784] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [181.426058] xe 0000:03:00.0: [drm:drm_client_modeset_probe] <7> [181.426824] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.427645] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix <7> [181.429588] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.429794] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [181.433954] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.434093] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [181.438315] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.438492] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [181.442766] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.442928] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [181.447117] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.447245] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [181.451470] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.451577] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [181.455714] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.456060] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [181.456190] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] <7> [181.456199] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [181.460359] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected <7> [181.460423] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] <7> [181.460429] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [181.464748] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected <7> [181.464756] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] <7> [181.464761] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [181.469081] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected <7> [181.469087] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] <7> [181.469092] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [181.473310] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected <7> [181.473321] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] <7> [181.473327] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [181.477722] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected <7> [181.477730] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] <7> [181.477735] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [181.482161] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected <7> [181.482172] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] <7> [181.482178] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [181.486379] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected <7> [181.486387] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.486398] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no <7> [181.486402] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no <7> [181.486406] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no <7> [181.486410] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no <7> [181.486413] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no <7> [181.486416] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no <7> [181.486420] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no <7> [181.486591] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.486609] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.486682] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [181.486698] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes <6> [181.486758] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe]) <7> [181.487340] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [181.488530] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.488555] xe 0000:03:00.0: [drm:drm_client_modeset_probe] <7> [181.488528] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01 <7> [181.488671] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [181.488758] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] <7> [181.488765] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [181.488787] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [181.488894] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [181.488995] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [181.489095] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [181.489203] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [181.489306] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [181.489404] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [181.489498] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [181.489590] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [181.489683] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [181.489773] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [181.489863] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [181.489952] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [181.490041] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [181.490134] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [181.490223] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [181.490322] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [181.490418] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [181.490511] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [181.490602] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <3> [181.491822] snd_hda_intel 0000:04:00.0: Unknown capability 0 <7> [181.491844] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101 <7> [181.492139] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL <7> [181.492292] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled <7> [181.493019] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected <7> [181.493027] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] <7> [181.493032] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [181.497230] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected <7> [181.497236] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] <7> [181.497240] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [181.501240] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware <7> [181.501352] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [181.501550] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [181.501713] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [181.501902] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [181.502328] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected <7> [181.502333] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] <7> [181.502337] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [181.506677] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected <7> [181.506683] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] <7> [181.506687] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <6> [181.507164] xe 0000:03:00.0: [drm] Using mailbox commands for power limits <7> [181.507596] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface <6> [181.507829] xe 0000:03:00.0: [drm] PL2 is supported on channel 0 <7> [181.507864] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0 <7> [181.508127] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1 <7> [181.508302] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1 <7> [181.510945] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected <7> [181.510952] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] <7> [181.510956] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [181.511773] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.515255] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected <7> [181.515265] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] <7> [181.515272] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [181.517604] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [181.518154] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.519597] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected <7> [181.519606] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.519614] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no <7> [181.519618] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no <7> [181.519622] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no <7> [181.519627] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no <7> [181.519631] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no <7> [181.519634] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no <7> [181.519638] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no <6> [181.519668] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode <7> [181.519760] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.519777] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.519829] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [181.519842] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes <7> [181.519872] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [181.520326] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0 <7> [181.520335] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1 <7> [181.520454] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:) <7> [181.520555] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [181.520661] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present <7> [181.521980] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <6> [181.523653] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000 <6> [181.523883] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000 <6> [181.523885] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000] <6> [181.523887] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000 <6> [181.523888] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000] <7> [181.524017] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes <7> [181.524180] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display <7> [181.524300] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [181.524619] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0 <7> [181.524723] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported! <7> [181.524833] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR <7> [181.524944] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6 <7> [181.525048] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2 <7> [181.525154] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [181.525456] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0 <7> [181.525585] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0 <7> [181.525698] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000 <7> [181.525807] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000 <7> [181.526115] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [181.526538] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [181.539663] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [181.539804] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [181.539917] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [181.540020] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [181.540116] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [181.540270] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [181.540370] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [181.540461] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [181.540551] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [181.540640] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [181.540727] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [181.540815] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [181.540902] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [181.540991] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [181.541077] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [181.541180] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [181.541275] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [181.541364] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [181.541451] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [181.541536] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [181.541621] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [181.541704] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [181.541788] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [181.541877] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [181.541966] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [181.542052] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [181.542144] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [181.542233] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [181.542324] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [181.542411] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [181.542498] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [181.542581] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [181.542665] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [181.542748] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [181.542764] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash <7> [181.542830] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [181.542883] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257 <7> [181.542918] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [181.542996] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [181.543108] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [181.543229] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [181.543349] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [181.543446] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.543454] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848) <7> [181.543475] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful <7> [181.543551] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [181.543643] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [181.543745] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [181.543839] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366) <7> [181.543934] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [181.544027] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [181.544129] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [181.544241] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [181.544333] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [181.544423] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [181.544520] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6 <7> [181.544620] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6 <7> [181.544717] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [181.544811] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6 <7> [181.544903] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [181.544993] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.545083] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000 <7> [181.545189] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.545276] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000 <7> [181.545362] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.545448] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [181.545536] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000 <7> [181.545636] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a <7> [181.545960] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [181.546102] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [181.546443] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [181.546592] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [181.547014] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [181.547122] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [181.547443] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [181.547587] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [181.548099] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [181.548410] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [181.548519] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [181.548627] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D <6> [181.549239] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4 <7> [181.549415] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin <7> [181.550306] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [181.550482] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [181.550584] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [181.550682] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP) <7> [181.550779] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7> [181.550876] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP) <7> [181.550977] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [181.551078] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0 <7> [181.551187] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7> [181.551291] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP) <6> [181.551428] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5 <7> [181.551388] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7> [181.551483] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP) <7> [181.551581] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.551674] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP) <7> [181.551766] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [181.551853] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0 <7> [181.551940] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7> [181.552027] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP) <7> [181.552115] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7> [181.552252] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP) <7> [181.552385] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.552513] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP) <7> [181.552581] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [181.552660] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [181.552985] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us <7> [181.553005] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0 <7> [181.553173] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec) <7> [181.553181] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.553341] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec) <7> [181.553353] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP) <7> [181.553503] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec) <7> [181.553523] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [181.553662] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec) <7> [181.553685] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0 <7> [181.553817] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec) <6> [181.553913] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6 <7> [181.553847] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7> [181.553971] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec) <7> [181.554008] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP) <7> [181.554123] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided <6> [181.554710] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7 <7> [181.554530] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided <7> [181.555165] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec) <7> [181.555850] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec) <7> [181.556504] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec) <7> [181.557170] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec) <7> [181.558358] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec) <7> [181.558806] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec) <7> [181.559479] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided <7> [181.560046] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided <6> [181.564561] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6) <7> [181.566951] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <7> [181.573473] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [181.573625] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [181.573744] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [181.574071] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT) <7> [181.574526] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F] <7> [181.575141] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F] <7> [181.575264] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT) <7> [181.575707] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT) <7> [181.575843] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G] <7> [181.576141] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G] <7> [181.576254] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT) <7> [181.576646] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H] <7> [181.576744] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT) <7> [181.577117] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT) <7> [181.577266] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I] <7> [181.577565] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I] <7> [181.577677] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT) <7> [181.578202] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [181.578358] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled <7> [181.578699] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled <7> [181.578846] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled <7> [181.579139] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [181.579238] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [181.579335] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [181.579621] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [181.579728] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [181.579831] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [181.580121] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7> [181.580232] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7> [181.580327] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7> [181.580611] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7> [181.580703] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7> [181.580804] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7> [181.581093] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7> [181.581200] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7> [181.581297] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7> [181.581580] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7> [181.581673] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7> [181.581767] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7> [181.582059] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D <7> [181.582165] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D <7> [181.582265] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D <7> [181.582552] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D <7> [181.582648] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D <7> [181.582742] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D <7> [181.583024] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A <7> [181.583116] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A <7> [181.583262] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B <7> [181.583353] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C <7> [181.583440] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D <7> [181.584021] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A <7> [181.584112] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A <7> [181.584212] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B <7> [181.584297] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C <7> [181.584381] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D <7> [181.584671] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A <7> [181.584774] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A <7> [181.584862] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A <7> [181.584947] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B <7> [181.585030] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C <7> [181.585112] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D <7> [181.585248] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [181.585388] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [181.585527] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [181.585830] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [181.585938] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [181.586049] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [181.586351] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [181.586477] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-4] hw state readout: disabled <7> [181.586793] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-5] hw state readout: disabled <7> [181.587092] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-5] hw state readout: disabled <7> [181.587212] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-6] hw state readout: disabled <7> [181.587317] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-7] hw state readout: disabled <7> [181.587608] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-6] hw state readout: disabled <7> [181.587716] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-8] hw state readout: disabled <7> [181.587810] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [181.587900] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [181.587986] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [181.588069] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [181.588160] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [181.588245] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [181.588331] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [181.588416] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7> [181.588506] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7> [181.588595] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7> [181.588682] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7> [181.588768] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7> [181.588851] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7> [181.588936] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz <7> [181.589017] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7> [181.589098] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7> [181.589188] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7> [181.589270] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7> [181.589351] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7> [181.589430] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7> [181.589514] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz <7> [181.589603] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz <7> [181.589689] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz <7> [181.589775] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz <7> [181.589859] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz <7> [181.589940] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz <7> [181.590020] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz <7> [181.590100] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz <7> [181.590396] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.590503] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.590605] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.590704] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [181.590800] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [181.590920] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [181.591026] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [181.591125] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [181.591453] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no <7> [181.591601] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [181.591709] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7> [181.591810] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7> [181.591909] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state] <7> [181.592007] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [181.595357] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3 <7> [181.598611] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7 <7> [181.598722] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [181.598810] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [181.598892] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [181.598970] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8 <7> [181.599046] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000 <7> [181.599124] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [181.599220] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [181.599297] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [181.599371] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [181.599443] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [181.599514] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [181.599584] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [181.599654] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [181.599725] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K <7> [181.599851] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [181.611154] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034 <7> [181.611978] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [181.612093] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff <7> [181.612195] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff <7> [181.612278] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [181.612355] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [181.612432] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff <6> [181.701867] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off <6> [181.701870] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off <7> [181.701986] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [181.702096] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [181.702203] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [181.702300] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [181.702458] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [181.702577] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [181.702702] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [181.702780] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [181.702858] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [181.702933] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [181.703071] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine <7> [181.703170] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [181.703272] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [181.703352] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [181.704753] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [181.704859] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [181.704960] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [181.705060] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440 <7> [181.705170] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [181.705284] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [181.705379] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [181.705472] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [181.705561] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [181.705645] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [181.705737] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [181.705827] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [181.705915] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [181.706003] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [181.706091] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [181.706190] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [181.706294] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [181.706402] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [181.706491] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [181.706574] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [181.706657] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [181.706738] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [181.706819] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [181.706906] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [181.706994] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [181.707080] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [181.707184] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [181.707274] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [181.707358] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [181.707442] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [181.707523] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [181.707604] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [181.707688] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [181.707786] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [181.707878] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [181.707967] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [181.708055] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040 <7> [181.708150] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [181.708251] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [181.708348] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000 <7> [181.708441] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [181.708527] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002 <7> [181.708893] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [181.708983] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [181.709068] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [181.709157] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [181.709514] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [181.709594] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [181.709671] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [181.709748] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [181.710095] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [181.710189] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [181.710270] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308 <7> [181.710346] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [181.710423] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [181.710498] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [181.710582] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [181.710952] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs <7> [181.711034] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000 <7> [181.711111] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308 <7> [181.711202] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080 <7> [181.711279] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc <7> [181.711351] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01 <7> [181.711424] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c <7> [181.711986] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [181.716699] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7 <7> [181.716792] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [181.716875] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [181.716955] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [181.717035] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328 <7> [181.717113] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000 <7> [181.717209] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [181.717283] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [181.717355] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [181.717427] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [181.717498] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [181.717570] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [181.717640] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [181.717709] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [181.717801] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [181.717902] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [181.720276] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe] <7> [181.721372] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000 <7> [181.723115] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs. <7> [181.741945] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [181.752791] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034 <7> [181.753185] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [181.753919] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [181.754014] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [181.754095] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140 <7> [181.754187] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [181.754261] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [181.754333] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [181.754403] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000 <7> [181.754476] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [181.754550] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000\|0x3f18000 <7> [181.757103] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [181.757218] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [181.757309] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01 <7> [181.759024] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [181.759113] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01 <7> [181.762735] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2 <6> [181.764048] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3 <7> [181.766042] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7 <7> [181.766137] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [181.766222] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [181.766296] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [181.766368] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a <7> [181.766440] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000 <7> [181.766511] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [181.766582] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [181.766650] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [181.766717] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [181.766784] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [181.766851] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [181.766917] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [181.766983] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [181.767545] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10 <7> [181.767961] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K <7> [181.768083] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [181.779168] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034 <7> [181.779546] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [181.779669] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00 <7> [181.779767] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00 <7> [181.779862] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff <7> [181.779955] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [181.780042] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000 <6> [181.780152] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off <6> [181.780155] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off <6> [181.780157] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off <6> [181.780159] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off <6> [181.780161] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off <6> [181.780162] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off <6> [181.780164] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off <6> [181.780165] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off <7> [181.780176] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs <7> [181.780474] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [181.780615] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.780739] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.780848] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.780954] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.781056] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.781181] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.781289] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.781393] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.781503] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.781723] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine <7> [181.781824] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.781928] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.782031] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.782145] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.782254] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.782361] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.782479] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.782590] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.782700] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.782928] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [181.783038] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.783184] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.783306] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.783424] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.783541] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.783662] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.783784] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.783899] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.784019] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.784281] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine <7> [181.784398] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [181.784521] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [181.784643] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [181.784780] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [181.784918] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [181.785055] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [181.785198] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [181.785327] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [181.785461] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [181.787551] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [181.787652] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [181.787754] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [181.787845] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008 <7> [181.787940] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020 <7> [181.788036] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008 <7> [181.788134] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [181.788227] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [181.788315] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [181.788400] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [181.788483] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [181.788565] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [181.788645] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [181.788725] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [181.788803] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [181.788888] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [181.788973] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [181.789054] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [181.789138] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [181.789220] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [181.789300] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [181.789378] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [181.789455] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [181.789539] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [181.789624] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [181.789723] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [181.789817] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [181.789906] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [181.789990] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [181.790076] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [181.790167] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [181.790250] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [181.790331] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [181.790412] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [181.790492] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [181.790570] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [181.790814] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs <7> [181.790897] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000 <7> [181.790978] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000 <7> [181.791065] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c <7> [181.791154] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1 <7> [181.791235] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0 <7> [181.791316] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c <7> [181.791397] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1 <7> [181.791485] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0 <7> [181.791571] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c <7> [181.791653] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1 <7> [181.791735] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0 <7> [181.791964] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [181.792049] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [181.792136] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [181.792219] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [181.792304] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [181.792384] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [181.792463] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [181.792541] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [181.792617] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [181.792694] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [181.792769] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [181.792852] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [181.793088] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs <7> [181.793182] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000 <7> [181.793262] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000 <7> [181.793342] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c <7> [181.793417] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1 <7> [181.793492] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0 <7> [181.793567] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c <7> [181.793644] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1 <7> [181.793727] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0 <7> [181.793808] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c <7> [181.793884] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1 <7> [181.793961] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0 <7> [181.794847] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [181.798981] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7 <7> [181.799088] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [181.799199] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [181.799301] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [181.799387] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa <7> [181.799469] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000 <7> [181.799553] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [181.799634] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [181.799714] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [181.799792] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [181.799868] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [181.799944] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [181.800020] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [181.800096] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [181.800207] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [181.800313] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [181.801801] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe] <7> [181.820475] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056) <7> [181.831149] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034 <7> [181.831508] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [181.832013] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [181.832098] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01 <7> [181.833908] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [181.833999] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01 <7> [181.846148] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [181.846617] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.846813] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.846997] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <7> [181.847183] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072 <5> [181.854225] Creating 4 MTD partitions on "xe.nvm.2560": <5> [181.854246] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR" <5> [181.864282] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC" <5> [181.870648] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM" <5> [181.877760] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM" <7> [181.886452] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.888420] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.888383] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7 <7> [181.888504] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin <6> [181.888717] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0 <7> [181.888766] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1 <7> [181.888870] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [181.888958] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [181.889043] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1 <7> [181.889464] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [181.889762] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [181.890061] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [181.890370] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [181.890672] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [181.890926] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008 <7> [181.891192] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108 <7> [181.891498] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208 <7> [181.891767] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308 <7> [181.892025] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8 <7> [181.892273] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008 <7> [181.892511] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108 <7> [181.892756] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208 <7> [181.892997] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308 <7> [181.893258] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8 <7> [181.893583] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.893569] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008 <7> [181.893816] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108 <7> [181.894056] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208 <7> [181.894364] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308 <7> [181.894621] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8 <7> [181.895368] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [181.895708] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [181.896019] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [181.896558] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [181.897094] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [181.897400] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset] <7> [181.897550] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset] <7> [181.897675] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset] <7> [181.898173] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71) <6> [181.898234] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe]) <7> [181.898335] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [181.898733] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [181.899003] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [181.899098] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [181.899576] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C] <7> [181.900006] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D] <7> [181.900493] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071) <7> [181.902649] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-4] adding connector to sysfs <7> [181.903076] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4 <7> [181.904327] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-4] generating connector hotplug event <7> [181.904477] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-5] adding connector to sysfs <7> [181.905574] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-5] generating connector hotplug event <7> [181.905734] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-5] adding connector to sysfs <7> [181.907992] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5 <7> [181.910780] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-5] generating connector hotplug event <7> [181.910915] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-6] adding connector to sysfs <7> [181.912020] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-6] generating connector hotplug event <7> [181.912178] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-7] adding connector to sysfs <7> [181.913494] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-7] generating connector hotplug event <7> [181.913616] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-6] adding connector to sysfs <7> [181.914871] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6 <7> [181.916826] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-6] generating connector hotplug event <7> [181.916925] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-8] adding connector to sysfs <7> [181.917664] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-8] generating connector hotplug event <6> [181.917746] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1 <7> [181.917845] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [181.918102] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632 <7> [181.920126] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4] <7> [181.920547] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [181.920653] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping <7> [181.920746] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping <7> [181.920830] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping <7> [181.920914] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [181.921086] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] <7> [181.925194] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.925320] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5] <7> [181.929475] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.929592] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5] <7> [181.933738] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-5] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.933868] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6] <7> [181.938098] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.938215] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7] <7> [181.942439] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.942547] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6] <7> [181.946772] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-6] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.946881] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8] <7> [181.951038] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1) <7> [181.951537] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [181.951641] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] <7> [181.951648] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4] <7> [181.955893] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected <7> [181.955906] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] <7> [181.955912] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5] <7> [181.960215] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected <7> [181.960224] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] <7> [181.960230] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5] <7> [181.964499] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected <7> [181.964506] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] <7> [181.964511] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6] <7> [181.968723] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected <7> [181.968731] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] <7> [181.968736] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7] <7> [181.973028] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected <7> [181.973035] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] <7> [181.973040] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6] <7> [181.977348] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected <7> [181.977356] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] <7> [181.977360] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8] <7> [181.981503] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected <7> [181.981508] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [181.981512] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no <7> [181.981514] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no <7> [181.981517] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no <7> [181.981519] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no <7> [181.981522] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no <7> [181.981524] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no <7> [181.981526] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no <7> [181.981548] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [181.981555] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [181.981603] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [181.981609] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes <7> [181.982575] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] <7> [181.982541] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01 <7> [181.982673] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [181.982825] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] <7> [181.982789] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [181.982834] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4] <7> [181.982894] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [181.982992] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [181.983089] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [181.983199] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [181.983311] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [181.983407] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [181.983498] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [181.983591] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [181.983683] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [181.983775] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [181.983867] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [181.983967] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [181.984066] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [181.984174] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [181.984280] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [181.984374] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [181.984467] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [181.984557] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [181.984648] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [181.987118] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected <7> [181.987127] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] <7> [181.987142] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5] <7> [181.991587] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected <7> [181.991593] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] <7> [181.991598] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5] <7> [181.996021] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected <7> [181.996027] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] <7> [181.996032] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6] <7> [181.997149] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware <7> [182.000223] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected <7> [182.000227] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] <7> [182.000230] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7] <6> [182.001977] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits <7> [182.002473] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface <6> [182.002679] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0 <7> [182.002725] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0 <7> [182.003011] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1 <7> [182.003149] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1 <7> [182.004280] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [182.004460] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [182.004631] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [182.004775] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [182.004978] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [182.005193] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [182.005420] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix <7> [182.005423] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [182.005617] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [182.005824] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected <7> [182.005831] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] <7> [182.005835] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6] <7> [182.011748] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected <7> [182.011756] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] <7> [182.011760] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8] <7> [182.013100] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [182.015955] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected <7> [182.015960] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [182.015969] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no <7> [182.015972] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no <7> [182.015974] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no <7> [182.015977] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no <7> [182.015979] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no <7> [182.015982] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no <7> [182.015984] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no <7> [182.016098] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [182.016112] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [182.016179] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [182.016187] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes <7> [182.016209] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [182.016174] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe]) <7> [182.016216] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [182.016329] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [182.016497] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [182.016926] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [182.017499] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [182.017774] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <3> [182.022869] snd_hda_intel 0000:0b:00.0: Unknown capability 0 <7> [182.030465] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [182.030530] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [182.030723] [IGT] xe_module_load: exiting, ret=0

Created at 2025-12-26 10:31:10