Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

Detail	Value
Duration	4.88 seconds
Igt-Version	IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4302-5c680ac45628b1951+ x86_64)
Out	Using IGT_SRANDOM=1766619712 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (4.879s)
Err	Starting subtest: load Subtest load: SUCCESS (4.879s)
Dmesg	<6> [137.920001] [IGT] xe_module_load: executing <4> [137.920148] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [137.932109] [IGT] xe_module_load: starting subtest load <5> [138.381388] Setting dangerous option force_probe - tainting kernel <6> [138.385954] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [138.388070] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode <6> [138.388546] xe 0000:00:02.0: [drm] Found pantherlake (device ID b083) integrated display version 30.00 stepping B0 <7> [138.388559] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] PANTHERLAKE b083:0004 dgfx:0 gfx:Xe3_LPG (30.00) media:Xe3_LPM (30.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [138.388756] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7> [138.388928] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [138.391726] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [138.391953] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [138.392162] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 1 (enabled) <7> [138.392378] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6fe5e018 <7> [138.392611] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [138.392829] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [138.393024] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [138.393198] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [138.393370] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [138.393587] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [138.393762] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [138.393961] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [138.394153] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [138.394338] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [138.394528] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [138.394740] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [138.394944] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [138.395147] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=7467 tRP=136 tRDPRE=88 tRAS=320 tRCD=136 tRC=456 <7> [138.395364] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [138.395587] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [138.395777] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=42130 peakbw: 102400 <7> [138.395967] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=45877 peakbw: 119472 <7> [138.396178] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [138.396361] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=47566 peakbw: 76800 <7> [138.396563] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=57825 peakbw: 102400 <7> [138.396746] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=64314 peakbw: 119472 <7> [138.396927] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [138.397105] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=56353 peakbw: 76800 <7> [138.397281] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [138.397460] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [138.397660] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [138.397837] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=62087 peakbw: 76800 <7> [138.398010] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [138.398192] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [138.398364] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [138.398545] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [138.398750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [138.398926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [138.399100] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [138.399274] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [138.399447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [138.399640] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [138.399849] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [138.400464] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [138.400710] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT PANTHERLAKE ", BDB version 266 <7> [138.400894] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [138.401070] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 445, min size 5) <7> [138.401236] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [138.401403] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [138.401586] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 862, min size 848) <7> [138.401754] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [138.401920] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [138.402099] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [138.402261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [138.402419] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [138.402621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [138.402787] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [138.402952] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [138.403103] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [138.403257] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [138.403400] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 266 not known; assuming 44 <7> [138.403562] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [138.403716] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [138.403866] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [138.404030] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [138.404179] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [138.404326] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [138.404467] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [138.404645] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [138.404787] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [138.404933] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [138.405081] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [138.405231] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [138.405440] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [138.405703] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [138.405953] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [138.406133] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [138.406392] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [138.406603] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [138.406783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [138.406965] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [138.407185] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6> [138.407407] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7> [138.407433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [138.407654] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [138.407835] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [138.408020] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [138.408457] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [138.409206] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe3lpd_dmc.bin <7> [138.410486] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [138.410738] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [138.410920] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [138.411088] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 93 (93.0 usec) <7> [138.411251] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [138.411434] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 115 (115.0 usec) <7> [138.411633] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 115 (115.0 usec) <7> [138.411786] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 115 (115.0 usec) <7> [138.411937] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [138.412084] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 99 (99.0 usec) <7> [138.412233] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [138.412380] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 121 (121.0 usec) <7> [138.412540] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 121 (121.0 usec) <7> [138.412684] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 121 (121.0 usec) <7> [138.416292] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [138.416551] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [138.416769] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [138.416974] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [138.417178] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f040 = 0xc003e200 (EVT_CTL) <7> [138.417373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f010 = 0x4b444b18 (EVT_HTP) <7> [138.417636] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [138.417822] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f014 = 0x4d984cd4 (EVT_HTP) <7> [138.418027] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [138.418208] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [138.418386] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f03c = 0xc0032b00 (EVT_CTL) (disabling) <7> [138.418580] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f00c = 0x7e406c8 (EVT_HTP) <7> [138.418749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [138.418924] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f014 = 0x19e019a0 (EVT_HTP) <7> [138.419100] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [138.419269] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [138.419434] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f43c = 0xc0032b00 (EVT_CTL) (disabling) <7> [138.419610] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f40c = 0x87e486c8 (EVT_HTP) <7> [138.419772] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [138.419957] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f414 = 0x99a89968 (EVT_HTP) <7> [138.420133] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [138.420293] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [138.420452] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032b00 (EVT_CTL) (disabling) <7> [138.420625] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x27e426c8 (EVT_HTP) <7> [138.420782] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [138.420809] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <7> [138.420939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f814 = 0x39a83968 (EVT_HTP) <7> [138.421105] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [138.421262] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5b7c0 <7> [138.421418] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032b00 (EVT_CTL) (disabling) <7> [138.421768] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x97e496c8 (EVT_HTP) <7> [138.421917] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc44 = 0xc0033200 (EVT_CTL) (disabling) <7> [138.422071] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc14 = 0xa9a8a968 (EVT_HTP) <6> [138.427700] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe3lpd_dmc.bin (v2.32) <7> [138.430511] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [138.430738] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 691200 kHz <7> [138.430954] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1382400 kHz <7> [138.431188] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI A/PHY A] Using AUX CH A (VBT) <7> [138.431449] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:509:DDI A/PHY A] <7> [138.431920] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [138.432127] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [138.432324] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [138.432547] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [138.432784] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [138.432974] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [138.433163] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [138.433351] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [138.433546] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [138.433762] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:509:DDI A/PHY A] initial power sequencer: PPS 0 <7> [138.433988] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [138.434182] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [138.434370] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [138.434570] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [138.434782] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [138.435007] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [138.435196] xe 0000:00:02.0: [drm:pps_vdd_init [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 VDD left on by BIOS, adjusting state tracking <7> [138.435384] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [138.501484] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.561485] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.621484] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.681485] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.741484] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.801484] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.861484] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.921485] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [138.981483] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.041483] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.101483] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.161483] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.221482] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.281483] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.341482] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.401482] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.461482] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.521482] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.581481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.641481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.701481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.761481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.821481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.881481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [139.941481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.001480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.061480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.121480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.181480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.241481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.301479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.361480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.361605] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <7> [140.421480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.482480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.542479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.602479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.662479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.722479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.782478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.842478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.902478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [140.962478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.022478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.082478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.142477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.202478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.262477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.322477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.382477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.442477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.502477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.562476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.622476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.682477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.742476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.802476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.862477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.922477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [141.982476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [142.042475] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [142.102476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [142.162476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [142.222475] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [142.282475] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [142.282598] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [142.282614] xe 0000:00:02.0: [drm] [ENCODER:509:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [142.282627] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 turning VDD off <7> [142.282792] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [142.282918] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [142.283252] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [142.283443] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [142.283652] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:509:DDI TC1/PHY TC1] <7> [142.284101] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:523:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [142.284250] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [142.284404] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:523:DDI TC2/PHY TC2] <7> [142.284693] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:532:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [142.284836] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [142.284986] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:532:DDI TC3/PHY TC3] <7> [142.285272] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [142.285441] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7> [142.285825] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [142.285948] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY TC4] <7> [142.286065] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using DDC pin 0xc (VBT) <7> [142.286576] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [142.286730] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [142.286877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [142.287021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] hw state readout: disabled <7> [142.287136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [142.287253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [142.287351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [142.287449] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [142.287571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [142.287664] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [142.287764] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [142.287868] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [142.287971] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [142.288071] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [142.288164] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [142.288251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [142.288338] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [142.288424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [142.288525] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [142.288616] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [142.288701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [142.288786] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [142.288870] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] hw state readout: disabled, pipe D <7> [142.288954] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] hw state readout: disabled, pipe D <7> [142.289039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] hw state readout: disabled, pipe D <7> [142.289122] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] hw state readout: disabled, pipe D <7> [142.289204] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] hw state readout: disabled, pipe D <7> [142.289286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] hw state readout: disabled, pipe D <7> [142.289375] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [142.289483] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [142.289581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST A] hw state readout: disabled, pipe A <7> [142.289674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST B] hw state readout: disabled, pipe B <7> [142.289761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:513:DP-MST C] hw state readout: disabled, pipe C <7> [142.289846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:514:DP-MST D] hw state readout: disabled, pipe D <7> [142.289933] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [142.290036] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:523:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [142.290128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DP-MST A] hw state readout: disabled, pipe A <7> [142.290220] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST B] hw state readout: disabled, pipe B <7> [142.290303] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST C] hw state readout: disabled, pipe C <7> [142.290382] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST D] hw state readout: disabled, pipe D <7> [142.290469] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [142.290566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:532:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [142.290647] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7> [142.290727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7> [142.290805] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7> [142.290882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7> [142.291138] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [142.291245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [142.291343] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [142.291530] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [142.291647] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [142.291775] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [142.291901] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [142.292013] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [142.292122] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [142.292240] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:510:DP-1] hw state readout: disabled <7> [142.292348] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:524:DP-2] hw state readout: disabled <7> [142.292448] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:DP-3] hw state readout: disabled <7> [142.292572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:HDMI-A-1] hw state readout: disabled <7> [142.292665] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [142.292766] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [142.292872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [142.292966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [142.293059] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [142.293148] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [142.293238] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [142.293327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [142.293419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [142.293513] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [142.293597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [142.293679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [142.293756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [142.293838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [142.293925] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [142.294020] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [142.294107] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [142.294181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [142.294255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [142.294328] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [142.294400] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [142.294481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] min_cdclk 0 kHz <7> [142.294553] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] min_cdclk 0 kHz <7> [142.294625] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] min_cdclk 0 kHz <7> [142.294697] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] min_cdclk 0 kHz <7> [142.294769] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] min_cdclk 0 kHz <7> [142.294840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] min_cdclk 0 kHz <7> [142.294911] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] min_cdclk 0 kHz <7> [142.294987] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [142.295089] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [142.295192] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [142.295286] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:506:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [142.295374] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [142.295537] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [142.295664] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [142.295790] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [142.295960] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [142.296156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [142.296281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [142.296402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [142.296538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [setup_hw_state] <7> [142.296662] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [142.301926] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [142.304738] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [142.304880] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [142.304987] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [142.305077] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [142.305164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [142.305253] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [142.305340] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [142.305420] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [142.305513] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [142.305591] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [142.305662] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [142.305732] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [142.305803] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [142.305877] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [142.305947] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [142.306087] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [142.317645] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [142.318416] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [142.318685] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000efe <7> [142.318784] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000efe <7> [142.318873] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [142.318960] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [142.319047] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 0000000f,0000000f <6> [142.523220] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [142.523222] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [142.523223] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [142.523356] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [142.523557] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7> [142.523689] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7> [142.523817] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [142.523927] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [142.524035] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [142.524189] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [142.524336] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [142.524495] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [142.524593] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [142.524694] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [142.524791] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [142.526172] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [142.526274] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [142.526383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [142.526492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [142.526619] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [142.526723] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [142.526823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xc50c] = 0x00010002 <7> [142.526918] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [142.527017] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [142.527113] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [142.527211] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [142.527306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [142.527399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [142.527535] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [142.527638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [142.527735] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [142.527823] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [142.527911] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [142.527998] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [142.528085] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [142.528171] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [142.528256] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [142.528341] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [142.528426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [142.528520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [142.528604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [142.528689] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [142.528773] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [142.528855] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0x00800080 <7> [142.528947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7> [142.529036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7> [142.529122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7> [142.529208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7> [142.529289] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7> [142.529373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [142.529469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [142.529546] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [142.529632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [142.529710] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe5f4] = 0x10001000 <7> [142.530039] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [142.530114] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [142.530194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [142.530267] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [142.530339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0x00800080 <7> [142.530669] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [142.530748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [142.530842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [142.530922] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [142.530993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0x00800080 <7> [142.531306] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [142.531378] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [142.531456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [142.531557] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [142.531633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0x00800080 <7> [142.531725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [142.531820] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [142.531904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [142.532423] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [142.532586] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [142.532684] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [142.532774] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [142.532860] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [142.532948] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [142.533038] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [142.533140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [142.533230] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [142.533314] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [142.533394] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [142.533473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [142.533545] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [142.533619] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [142.533690] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [142.533790] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [142.533950] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [142.536790] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe1e000 for xe_guc_buf_cache_init_with_size [xe] <7> [142.540053] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 60 ext-regs. <7> [142.559329] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [142.570577] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [142.570939] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [142.571851] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4103 dwords <7> [142.571989] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [142.572082] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000 <7> [142.572167] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x731c] = 0x20002000 <7> [142.572248] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [142.574917] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [142.575040] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [142.575139] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [142.577440] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [142.577577] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <6> [142.580863] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [142.584340] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [142.584473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [142.584596] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [142.584714] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [142.584828] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [142.584940] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [142.585050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [142.585160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [142.585268] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [142.585373] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [142.585504] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [142.585606] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [142.585702] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [142.585799] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [142.587891] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/ptl_huc.bin version 10.3.3 <7> [142.588702] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [142.588915] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [142.609616] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [142.610289] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [142.610701] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [142.611008] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [142.611291] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [142.611552] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <6> [142.611786] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [142.611791] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [142.611794] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [142.611797] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [142.611800] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [142.611803] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [142.611805] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [142.611808] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [142.611811] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [142.611814] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [142.611819] xe 0000:00:02.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs <7> [142.612491] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [142.612903] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [142.613301] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [142.613789] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [142.614195] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [142.614560] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [142.614911] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [142.615297] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [142.615673] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [142.616012] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [142.616690] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [142.617016] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [142.617354] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [142.617702] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [142.618021] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [142.618310] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [142.618604] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [142.618866] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [142.619117] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [142.619394] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [142.621591] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [142.621800] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [142.622030] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [142.622254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [142.622437] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [142.622662] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [142.622876] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [142.623053] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [142.623242] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [142.623454] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [142.623740] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [142.623971] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [142.624192] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [142.624413] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [142.624616] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [142.624803] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [142.624987] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [142.625196] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [142.625369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [142.625546] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [142.625692] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [142.625853] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [142.626028] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [142.626182] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [142.626330] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [142.626481] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [142.626627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [142.626787] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [142.626942] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [142.627093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [142.627237] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [142.627373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [142.627515] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [142.627657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [142.627790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [142.627921] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [142.628051] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [142.628660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [142.628801] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [142.628941] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [142.629070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [142.629194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [142.629315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [142.629434] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [142.629570] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [142.629690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [142.629802] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [142.629918] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [142.630738] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [142.630928] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [142.631077] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [142.631212] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [142.631345] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [142.631485] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [142.631621] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [142.631756] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [142.631872] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [142.631989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [142.632111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [142.632232] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [142.632343] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [142.632450] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [142.632563] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [142.632679] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [142.632808] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [142.636271] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2161000 for xe_guc_buf_cache_init_with_size [xe] <7> [142.654905] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056) <7> [142.676302] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [142.676845] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [142.678406] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [142.678673] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [142.682516] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [142.682794] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [142.705622] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [142.706579] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [142.707002] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [142.707403] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [142.707764] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [142.708373] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [142.708692] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [142.708966] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [142.710763] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [142.711219] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [142.711722] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [142.712132] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [142.712579] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [142.712958] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [142.713381] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [142.713833] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [142.714197] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [142.714556] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [142.714898] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [142.715231] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [142.715587] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [142.715921] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [142.716250] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [142.716594] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 0: start 0x59008 <7> [142.716919] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 1: start 0x59108 <7> [142.717286] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 2: start 0x59208 <7> [142.717627] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 3: start 0x59308 <7> [142.717991] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 4: start 0x593c8 <7> [142.718790] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [142.719279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [142.719749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [142.720227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400 <7> [142.720673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400 <7> [142.721106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [142.721626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [142.722064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [142.722446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [142.722846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [fastset] <7> [142.723474] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff3032 0x2b432a01) <7> [142.723935] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [142.724430] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [142.724852] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [142.725219] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [142.725616] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:506:pipe D] <7> [142.725991] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800000 0x2b400001) <7> [142.731358] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:510:DP-1] adding connector to sysfs <7> [142.732927] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [142.734875] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:510:DP-1] generating connector hotplug event <7> [142.734974] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:524:DP-2] adding connector to sysfs <7> [142.735620] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [142.736966] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:524:DP-2] generating connector hotplug event <7> [142.737025] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-3] adding connector to sysfs <7> [142.738116] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [142.739574] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-3] generating connector hotplug event <7> [142.739624] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-1] adding connector to sysfs <7> [142.740319] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-1] generating connector hotplug event <6> [142.747705] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [142.747758] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [142.753366] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [142.757625] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7> [142.758761] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [142.758914] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1728 <7> [142.759693] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [142.759699] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [142.761967] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [142.762313] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [142.762575] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:510:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [142.762780] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [142.763012] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [142.763286] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:524:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [142.763603] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [142.763960] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [142.764309] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [142.764883] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [142.765183] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [142.765482] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [142.765754] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:506:pipe D] not active, skipping <7> [142.766015] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [142.766848] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [142.767507] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [142.767954] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [142.772184] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [142.772328] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [142.773067] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <6> [142.773023] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [142.773085] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [142.773952] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [142.773989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [142.773948] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [142.773993] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [142.774191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [142.774195] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [142.774198] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [142.774456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [142.774461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [142.774476] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [142.778361] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7> [142.778813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [142.778819] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [142.778825] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [142.778828] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [142.778831] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [142.778833] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [142.778938] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [142.778953] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [142.779014] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [142.779026] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [142.779230] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [142.779255] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [142.780038] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 30 <7> [142.780238] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [142.780410] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [142.780600] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [142.780769] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [142.780934] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [142.781098] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [142.781269] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [142.781462] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [142.781655] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [142.781825] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [142.781994] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [142.782169] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [142.782344] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [142.782527] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [142.782708] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [142.782892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [142.783072] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [142.783249] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [142.783435] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [142.783667] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [142.783866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [142.784209] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [142.784581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [142.784590] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [142.784865] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [142.784873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [142.784878] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [142.785127] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [142.785133] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [142.785138] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [142.785406] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [142.785411] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [142.785416] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [142.786187] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [142.786415] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [142.786661] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [142.786911] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [142.787174] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [142.787509] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [142.787850] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [142.789727] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [142.789735] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [142.789759] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [142.789764] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [142.789768] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [142.789773] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [142.790700] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [142.790753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [142.790895] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [142.790961] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [142.791534] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [142.808287] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [142.811998] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [142.812179] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [142.812705] [IGT] xe_module_load: exiting, ret=0

Created at 2025-12-24 23:54:47