Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

Detail	Value
Duration	4.79 seconds
Igt-Version	IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4298-87b84fb15a5b9a631+ x86_64)
Out	Using IGT_SRANDOM=1766527003 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (4.795s)
Err	Starting subtest: load Subtest load: SUCCESS (4.795s)
Dmesg	<6> [151.603814] [IGT] xe_module_load: executing <4> [151.603882] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [151.609332] [IGT] xe_module_load: starting subtest load <5> [151.958518] Setting dangerous option force_probe - tainting kernel <6> [151.962952] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [151.965126] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode <6> [151.965793] xe 0000:00:02.0: [drm] Found pantherlake (device ID b083) integrated display version 30.00 stepping B0 <7> [151.965805] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] PANTHERLAKE b083:0004 dgfx:0 gfx:Xe3_LPG (30.00) media:Xe3_LPM (30.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [151.966033] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7> [151.966209] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [151.969316] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [151.969547] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [151.969763] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 1 (enabled) <7> [151.969996] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6fe5e018 <7> [151.970234] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [151.970424] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [151.970608] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [151.970784] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [151.970973] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [151.971171] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [151.971373] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [151.971573] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [151.971763] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [151.971953] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [151.972163] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [151.972379] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [151.972581] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [151.972779] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=7467 tRP=136 tRDPRE=88 tRAS=320 tRCD=136 tRC=456 <7> [151.972988] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [151.973179] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [151.973367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=42130 peakbw: 102400 <7> [151.973551] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=45877 peakbw: 119472 <7> [151.973732] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [151.973951] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=47566 peakbw: 76800 <7> [151.974175] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=57825 peakbw: 102400 <7> [151.974355] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=64314 peakbw: 119472 <7> [151.974533] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [151.974724] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=56353 peakbw: 76800 <7> [151.974923] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [151.975110] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [151.975292] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [151.975477] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=62087 peakbw: 76800 <7> [151.975659] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [151.975834] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [151.976021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [151.976196] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [151.976373] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [151.976552] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [151.976759] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [151.976963] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [151.977168] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [151.977347] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [151.977564] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [151.978368] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [151.978609] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT PANTHERLAKE ", BDB version 266 <7> [151.978813] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [151.979039] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 445, min size 5) <7> [151.979236] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [151.979402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [151.979561] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 862, min size 848) <7> [151.979715] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [151.979862] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [151.980036] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [151.980183] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [151.980325] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [151.980466] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [151.980605] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [151.980744] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [151.980873] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [151.981017] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [151.981148] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 266 not known; assuming 44 <7> [151.981295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [151.981430] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [151.981564] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [151.981698] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [151.981838] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [151.981988] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [151.982116] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [151.982247] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [151.982396] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [151.982533] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [151.982662] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [151.982802] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [151.983019] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [151.983299] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [151.983521] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [151.983697] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [151.983982] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [151.984188] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [151.984370] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [151.984555] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [151.984776] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6> [151.985044] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7> [151.985067] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [151.985291] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [151.985477] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [151.985662] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [151.986101] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [151.986805] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe3lpd_dmc.bin <7> [151.988196] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [151.988468] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [151.988655] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [151.988833] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 93 (93.0 usec) <7> [151.989018] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [151.989183] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 115 (115.0 usec) <7> [151.989343] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 115 (115.0 usec) <7> [151.989500] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 115 (115.0 usec) <7> [151.989654] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [151.989806] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 99 (99.0 usec) <7> [151.989966] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [151.990115] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 121 (121.0 usec) <7> [151.990263] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 121 (121.0 usec) <7> [151.990409] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 121 (121.0 usec) <7> [151.993028] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [151.993268] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [151.993486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [151.993697] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [151.993901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f040 = 0xc003e200 (EVT_CTL) <7> [151.994160] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f010 = 0x4b444b18 (EVT_HTP) <7> [151.994365] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [151.994566] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f014 = 0x4d984cd4 (EVT_HTP) <7> [151.994806] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [151.995009] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [151.995197] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f03c = 0xc0032b00 (EVT_CTL) (disabling) <7> [151.995400] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f00c = 0x7e406c8 (EVT_HTP) <7> [151.995586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [151.995763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f014 = 0x19e019a0 (EVT_HTP) <7> [151.995948] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [151.996120] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [151.996285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f43c = 0xc0032b00 (EVT_CTL) (disabling) <7> [151.996445] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f40c = 0x87e486c8 (EVT_HTP) <7> [151.996603] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [151.996758] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f414 = 0x99a89968 (EVT_HTP) <7> [151.996935] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [151.997097] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [151.997255] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032b00 (EVT_CTL) (disabling) <7> [151.997411] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x27e426c8 (EVT_HTP) <7> [151.997566] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [151.997744] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f814 = 0x39a83968 (EVT_HTP) <7> [151.997951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [151.998121] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5b7c0 <7> [151.998274] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032b00 (EVT_CTL) (disabling) <7> [151.998426] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x97e496c8 (EVT_HTP) <7> [151.998583] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc44 = 0xc0033200 (EVT_CTL) (disabling) <7> [151.998741] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc14 = 0xa9a8a968 (EVT_HTP) <7> [151.999881] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <6> [152.004383] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe3lpd_dmc.bin (v2.32) <7> [152.009537] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [152.009770] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 691200 kHz <7> [152.010003] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1382400 kHz <7> [152.010262] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI A/PHY A] Using AUX CH A (VBT) <7> [152.010512] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:509:DDI A/PHY A] <7> [152.010810] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [152.011067] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [152.011272] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [152.011511] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [152.011709] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [152.011904] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [152.012116] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [152.012306] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [152.012526] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [152.012754] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:509:DDI A/PHY A] initial power sequencer: PPS 0 <7> [152.013019] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [152.013213] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [152.013405] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [152.013590] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [152.013801] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [152.014031] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [152.014216] xe 0000:00:02.0: [drm:pps_vdd_init [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 VDD left on by BIOS, adjusting state tracking <7> [152.014391] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [152.080918] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.140914] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.200910] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.260906] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.320902] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.380898] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.440893] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.500889] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.560886] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.620881] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.680877] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.740874] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.800869] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.860865] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.920861] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [152.980857] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.040853] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.100850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.160845] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.220842] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.280851] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.345834] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.410828] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.475824] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.535823] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.595818] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.655813] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.715810] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.775807] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.835801] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.895798] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.955794] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [153.955916] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <7> [154.015791] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.075786] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.135783] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.195779] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.255776] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.315771] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.375768] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.435764] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.495761] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.555757] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.615752] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.675748] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.735746] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.795741] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.855737] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.915733] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [154.975731] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.035727] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.095723] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.155719] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.215717] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.275712] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.335708] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.395704] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.455702] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.515697] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.575695] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.635690] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.695688] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.756686] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.821678] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.881677] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [155.881819] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [155.881835] xe 0000:00:02.0: [drm] [ENCODER:509:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [155.881847] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 turning VDD off <7> [155.882012] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [155.882141] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [155.882522] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [155.882738] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [155.882902] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:509:DDI TC1/PHY TC1] <7> [155.883412] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:523:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [155.883563] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [155.883728] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:523:DDI TC2/PHY TC2] <7> [155.884037] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:532:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [155.884181] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [155.884335] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:532:DDI TC3/PHY TC3] <7> [155.884643] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [155.884812] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7> [155.885164] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [155.885295] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY TC4] <7> [155.885416] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using DDC pin 0xc (VBT) <7> [155.885922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [155.886073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [155.886219] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [155.886360] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] hw state readout: disabled <7> [155.886467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [155.886574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [155.886685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [155.886801] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [155.886921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [155.887031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [155.887133] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [155.887235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [155.887336] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [155.887437] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [155.887537] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [155.887654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [155.887776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [155.887878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [155.887979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [155.888076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [155.888170] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [155.888261] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [155.888349] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] hw state readout: disabled, pipe D <7> [155.888436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] hw state readout: disabled, pipe D <7> [155.888523] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] hw state readout: disabled, pipe D <7> [155.888611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] hw state readout: disabled, pipe D <7> [155.888706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] hw state readout: disabled, pipe D <7> [155.888793] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] hw state readout: disabled, pipe D <7> [155.888887] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [155.888990] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [155.889073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST A] hw state readout: disabled, pipe A <7> [155.889155] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST B] hw state readout: disabled, pipe B <7> [155.889235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:513:DP-MST C] hw state readout: disabled, pipe C <7> [155.889314] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:514:DP-MST D] hw state readout: disabled, pipe D <7> [155.889397] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [155.889507] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:523:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [155.889611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DP-MST A] hw state readout: disabled, pipe A <7> [155.889717] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST B] hw state readout: disabled, pipe B <7> [155.889817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST C] hw state readout: disabled, pipe C <7> [155.889903] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST D] hw state readout: disabled, pipe D <7> [155.889986] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [155.890083] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:532:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [155.890167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7> [155.890246] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7> [155.890325] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7> [155.890402] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7> [155.890659] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [155.890770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [155.890859] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [155.890992] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [155.891114] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [155.891231] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [155.891341] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [155.891447] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [155.891564] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [155.891684] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:510:DP-1] hw state readout: disabled <7> [155.891790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:524:DP-2] hw state readout: disabled <7> [155.891890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:DP-3] hw state readout: disabled <7> [155.891986] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:HDMI-A-1] hw state readout: disabled <7> [155.892076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [155.892166] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [155.892254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [155.892341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [155.892428] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [155.892521] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [155.892621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [155.892735] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [155.892833] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [155.892926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [155.893011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [155.893101] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [155.893187] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [155.893274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [155.893361] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [155.893444] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [155.893524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [155.893603] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [155.893685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [155.893761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [155.893837] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [155.893912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] min_cdclk 0 kHz <7> [155.893987] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] min_cdclk 0 kHz <7> [155.894062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] min_cdclk 0 kHz <7> [155.894136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] min_cdclk 0 kHz <7> [155.894210] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] min_cdclk 0 kHz <7> [155.894283] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] min_cdclk 0 kHz <7> [155.894357] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] min_cdclk 0 kHz <7> [155.894433] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [155.894534] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [155.894636] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [155.894742] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:506:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [155.894847] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [155.895001] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [155.895133] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [155.895273] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [155.895448] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [155.895641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [155.895777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [155.895899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [155.896019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [setup_hw_state] <7> [155.896139] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [155.901575] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [155.904419] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [155.904546] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [155.904647] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [155.904757] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [155.904851] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [155.904944] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [155.905034] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [155.905114] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [155.905196] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [155.905270] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [155.905343] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [155.905414] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [155.905484] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [155.905558] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [155.905645] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [155.905832] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [155.916799] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [155.917558] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [155.917824] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000efe <7> [155.917934] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000efe <7> [155.918028] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [155.918113] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [155.918201] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 0000000f,0000000f <6> [156.119171] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [156.119174] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [156.119176] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [156.119334] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [156.119468] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7> [156.119601] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7> [156.119770] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [156.119886] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [156.119998] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [156.120151] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [156.120289] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [156.120442] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [156.120535] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [156.120630] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [156.120733] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [156.121900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [156.122007] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [156.122122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [156.122226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [156.122326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [156.122423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [156.122519] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xc50c] = 0x00010002 <7> [156.122610] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [156.122729] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [156.122838] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [156.122936] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [156.123032] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [156.123126] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [156.123219] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [156.123311] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [156.123403] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [156.123494] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [156.123583] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [156.123674] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [156.123768] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [156.123869] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [156.123962] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [156.124051] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [156.124138] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [156.124225] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [156.124317] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [156.124405] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [156.124492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [156.124575] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0x00800080 <7> [156.124666] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7> [156.124746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7> [156.124824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7> [156.124899] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7> [156.124975] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7> [156.125052] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [156.125134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [156.125214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [156.125302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [156.125382] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe5f4] = 0x10001000 <7> [156.125730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [156.125806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [156.125888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [156.125962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [156.126035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0x00800080 <7> [156.126345] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [156.126419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [156.126504] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [156.126579] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [156.126654] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0x00800080 <7> [156.126968] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [156.127045] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [156.127128] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [156.127202] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [156.127283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0x00800080 <7> [156.127354] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [156.127423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [156.127498] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [156.128045] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [156.128199] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [156.128298] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [156.128392] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [156.128479] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [156.128562] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [156.128643] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [156.128739] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [156.128815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [156.128889] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [156.128962] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [156.129033] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [156.129105] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [156.129176] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [156.129247] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [156.129340] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [156.129502] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [156.132234] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe1e000 for xe_guc_buf_cache_init_with_size [xe] <7> [156.135396] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 60 ext-regs. <7> [156.154465] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [156.165746] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [156.166119] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [156.167260] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4103 dwords <7> [156.167417] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [156.167538] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000 <7> [156.167642] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x731c] = 0x20002000 <7> [156.167755] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [156.170916] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [156.171042] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [156.171147] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [156.174074] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [156.174189] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <6> [156.178371] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [156.181645] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [156.181785] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [156.181902] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [156.181999] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [156.182091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [156.182180] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [156.182267] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [156.182352] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [156.182437] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [156.182521] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [156.182604] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [156.182698] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [156.182778] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [156.182856] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [156.184503] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/ptl_huc.bin version 10.3.3 <7> [156.185169] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [156.185313] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [156.206890] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [156.207482] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [156.207754] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [156.207963] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [156.208159] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [156.208327] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <6> [156.208490] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [156.208493] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [156.208495] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [156.208497] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [156.208499] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [156.208501] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [156.208503] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [156.208505] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [156.208507] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [156.208509] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [156.208512] xe 0000:00:02.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs <7> [156.208967] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [156.209221] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [156.209482] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [156.209736] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [156.209990] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [156.210218] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [156.210432] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [156.210644] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [156.210877] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [156.211082] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [156.211431] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [156.211622] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [156.211838] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [156.212024] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [156.212192] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [156.212352] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [156.212508] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [156.212668] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [156.212820] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [156.212972] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [156.214346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [156.214473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [156.214600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [156.214739] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [156.214857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [156.214998] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [156.215141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [156.215252] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [156.215366] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [156.215502] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [156.215641] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [156.215801] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [156.215952] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [156.216079] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [156.216201] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [156.216317] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [156.216434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [156.216544] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [156.216653] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [156.216757] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [156.216862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [156.216965] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [156.217063] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [156.217160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [156.217257] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [156.217353] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [156.217449] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [156.217565] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [156.217687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [156.217812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [156.217937] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [156.218049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [156.218151] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [156.218248] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [156.218344] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [156.218439] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [156.218535] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [156.219088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [156.219189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [156.219286] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [156.219384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [156.219490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [156.219594] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [156.219704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [156.219822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [156.219916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [156.220008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [156.220096] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [156.220772] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [156.220924] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [156.221035] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [156.221141] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [156.221245] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [156.221346] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [156.221439] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [156.221536] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [156.221637] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [156.221741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [156.221823] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [156.221911] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [156.221990] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [156.222068] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [156.222147] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [156.222243] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [156.222351] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [156.225761] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2161000 for xe_guc_buf_cache_init_with_size [xe] <7> [156.244180] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056) <7> [156.265242] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [156.265772] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [156.267121] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [156.267330] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [156.270148] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [156.270374] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [156.292812] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [156.293729] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [156.294151] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [156.294540] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [156.294898] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [156.295517] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [156.295859] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [156.296134] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [156.297772] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [156.298247] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [156.298758] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [156.299218] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [156.299622] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [156.300084] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [156.300488] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [156.300883] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [156.301272] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [156.301620] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [156.301998] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [156.302382] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [156.302768] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [156.303093] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [156.303418] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [156.303760] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 0: start 0x59008 <7> [156.304081] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 1: start 0x59108 <7> [156.304395] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 2: start 0x59208 <7> [156.304713] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 3: start 0x59308 <7> [156.305025] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 4: start 0x593c8 <7> [156.305854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [156.306329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [156.306792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [156.307266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400 <7> [156.307749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400 <7> [156.308154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [156.308621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [156.309042] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [156.309461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [156.309849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [fastset] <7> [156.310398] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff3032 0x2b432a01) <7> [156.310863] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [156.311382] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [156.311777] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [156.312158] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [156.312516] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:506:pipe D] <7> [156.312867] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800000 0x2b400001) <7> [156.318236] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:510:DP-1] adding connector to sysfs <7> [156.319778] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [156.322417] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:510:DP-1] generating connector hotplug event <7> [156.322521] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:524:DP-2] adding connector to sysfs <7> [156.323239] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [156.324990] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:524:DP-2] generating connector hotplug event <7> [156.325088] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-3] adding connector to sysfs <7> [156.327173] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [156.329374] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-3] generating connector hotplug event <7> [156.329475] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-1] adding connector to sysfs <7> [156.331263] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-1] generating connector hotplug event <6> [156.335738] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [156.335908] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [156.347941] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [156.360066] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7> [156.361737] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [156.361914] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1728 <7> [156.362545] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [156.362550] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [156.363814] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [156.364222] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [156.364613] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:510:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [156.364989] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [156.365320] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [156.365568] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:524:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [156.365910] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [156.366294] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [156.366633] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [156.367374] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [156.367810] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [156.368104] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [156.368430] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:506:pipe D] not active, skipping <7> [156.368745] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [156.369213] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [156.369861] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [156.370359] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [156.374654] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [156.374931] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6> [156.375506] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [156.375632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [156.375657] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [156.376327] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [156.376375] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [156.376317] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [156.376381] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [156.376665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [156.376672] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [156.376676] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [156.377181] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [156.377196] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [156.377210] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [156.381682] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7> [156.381945] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [156.381950] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [156.381962] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [156.381965] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [156.381969] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [156.381972] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [156.382110] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [156.382147] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [156.382226] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [156.382242] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [156.382964] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [156.382973] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [156.383612] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [156.383572] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 30 <7> [156.383956] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [156.383856] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [156.383966] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [156.384094] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [156.384264] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [156.384273] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [156.384277] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [156.384329] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [156.384536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [156.384542] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [156.384546] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [156.384583] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [156.384817] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [156.384823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [156.384822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [156.384827] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [156.385021] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [156.385223] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [156.385456] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [156.385660] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [156.385865] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [156.386070] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [156.386309] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [156.386512] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [156.386734] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [156.386937] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [156.387181] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [156.387395] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [156.387629] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [156.387859] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [156.388066] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [156.388258] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [156.389135] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [156.389143] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [156.389151] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [156.389156] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [156.389159] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [156.389163] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [156.389282] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [156.389299] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [156.389357] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [156.389367] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [156.389400] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [156.389393] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [156.389619] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [156.389900] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [156.390142] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [156.390357] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [156.390568] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [156.390820] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [156.401127] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [156.404060] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [156.404212] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [156.404658] [IGT] xe_module_load: exiting, ret=0

Created at 2025-12-23 22:09:37