Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.31 seconds |
| Igt-Version |
IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4297-98fdf8a438c3a1d9d+ x86_64) |
| Out |
Using IGT_SRANDOM=1766507187 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.312s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.312s) |
| Dmesg |
<6> [145.040782] [IGT] xe_module_load: executing
<4> [145.040827] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [145.045330] [IGT] xe_module_load: starting subtest load
<6> [145.195468] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [145.195475] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [145.195476] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [145.195478] nvme 0000:05:00.0: [ 0] RxErr (First)
<6> [145.305696] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [145.305702] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [145.305703] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [145.305705] nvme 0000:05:00.0: [ 0] RxErr (First)
<6> [145.306620] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0
<4> [145.306623] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [145.306624] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001100/00002000
<4> [145.306625] pcieport 0000:00:06.0: [ 8] Rollover
<4> [145.306626] pcieport 0000:00:06.0: [12] Timeout
<6> [145.308452] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:00:06.0
<4> [145.308455] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Receiver ID)
<4> [145.308456] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000040/0000e000
<4> [145.308457] nvme 0000:05:00.0: [ 6] BadTLP
<6> [145.308461] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<5> [145.377154] Setting dangerous option force_probe - tainting kernel
<6> [145.380348] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [145.381987] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [145.382554] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [145.382562] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [145.382685] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [145.382783] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [145.382889] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [145.385992] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [145.386019] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [145.386021] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [145.386023] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [145.386024] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [145.386153] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [145.386318] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [145.386444] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [145.386775] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [145.386883] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [145.386987] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [145.387098] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [145.387223] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [145.387349] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [145.387679] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [145.387807] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [145.387922] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [145.388037] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [145.388361] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [145.388891] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [145.402499] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [145.402615] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [145.402722] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [145.402826] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [145.402927] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [145.403025] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [145.403123] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [145.403230] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [145.403322] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [145.403427] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [145.403537] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [145.403640] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [145.403741] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [145.403841] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [145.403937] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [145.404029] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [145.404120] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [145.404220] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [145.404313] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [145.404406] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [145.404497] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [145.404594] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [145.404697] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.404795] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [145.404889] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.404982] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [145.405073] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.405163] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.405267] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [145.405362] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [145.405695] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [145.405843] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [145.406180] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [145.406357] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [145.406738] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [145.406840] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [145.407147] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [145.407311] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [145.407644] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
<7> [145.407670] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [145.407794] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [145.408107] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [145.408222] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [145.409033] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [145.409981] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [145.410345] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [145.410464] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [145.410567] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [145.410659] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [145.410747] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [145.410830] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [145.410911] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [145.410991] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [145.411069] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [145.411147] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [145.411235] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [145.411315] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [145.411393] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [145.411469] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [145.411546] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [145.411626] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [145.411708] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [145.412794] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [145.412928] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [145.413040] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [145.413140] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [145.413251] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [145.413345] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [145.413448] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [145.413544] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [145.413636] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [145.413728] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [145.413819] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [145.413911] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [145.414003] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.414093] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [145.414203] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [145.414294] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [145.414385] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [145.414489] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [145.414589] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [145.414683] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [145.414777] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.414870] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [145.414966] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [145.415057] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [145.415158] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.415267] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [145.415367] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [145.415463] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [145.415558] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.415649] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [145.417652] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [145.424964] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [145.425172] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [145.425305] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [145.425501] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<6> [145.426051] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [145.426018] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [145.426661] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [145.426794] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [145.427705] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [145.427863] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [145.428190] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [145.428302] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [145.428700] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [145.428799] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [145.429207] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [145.429342] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [145.429644] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [145.429756] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [145.430340] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [145.430494] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [145.430834] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [145.430964] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [145.431267] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [145.431359] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [145.431449] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [145.431738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [145.431826] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [145.431914] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [145.432215] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [145.432340] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [145.432664] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [145.432778] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [145.433109] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [145.433238] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [145.433554] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [145.433674] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [145.434021] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [145.434118] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [145.434220] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [145.434513] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [145.434601] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [145.434687] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [145.434979] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [145.435073] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [145.435170] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [145.435649] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [145.435791] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [145.435903] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [145.436003] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [145.436097] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [145.436218] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [145.436518] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [145.436605] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [145.436691] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [145.436777] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [145.436862] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [145.437153] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [145.437256] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [145.437342] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [145.437428] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [145.437516] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [145.437610] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [145.437702] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [145.437814] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [145.437922] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [145.438235] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [145.438339] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [145.438436] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [145.438736] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [145.438848] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-1] hw state readout: disabled
<7> [145.439187] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-1] hw state readout: disabled
<7> [145.439291] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-2] hw state readout: disabled
<7> [145.439389] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-2] hw state readout: disabled
<7> [145.439684] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-3] hw state readout: disabled
<7> [145.439780] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-3] hw state readout: disabled
<7> [145.439872] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-4] hw state readout: disabled
<7> [145.439961] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [145.440049] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [145.440136] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [145.440231] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [145.440321] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [145.440410] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [145.440496] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [145.440580] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [145.440664] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [145.440746] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [145.440834] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [145.440922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [145.441008] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [145.441090] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [145.441178] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [145.441257] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [145.441337] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [145.441418] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [145.441496] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [145.441574] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [145.441660] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [145.441747] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [145.441832] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [145.441914] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [145.441995] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [145.442074] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [145.442154] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [145.442249] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [145.442540] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.442636] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.442728] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.442817] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.442908] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [145.443029] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [145.443141] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [145.443263] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [145.443595] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [145.443780] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [145.443903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [145.444009] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [145.444111] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [145.444247] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [145.448930] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [145.452188] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [145.452301] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [145.452393] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [145.452479] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [145.452563] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [145.452642] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [145.452719] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [145.452795] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [145.452871] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [145.452947] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [145.453022] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [145.453099] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [145.453180] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [145.453261] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [145.453340] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [145.453465] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [145.464164] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [145.464910] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [145.465191] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [145.465302] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [145.465401] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [145.465496] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [145.465588] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [145.553898] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [145.553901] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [145.554044] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [145.554161] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [145.554287] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [145.554381] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [145.554504] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [145.554620] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [145.554748] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [145.554833] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [145.554921] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [145.555003] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [145.555132] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [145.555276] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [145.555377] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [145.555468] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [145.557025] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [145.557124] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [145.557236] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [145.557323] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [145.557408] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [145.557499] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [145.557586] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [145.557668] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [145.557755] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [145.557837] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [145.557920] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [145.558004] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [145.558085] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [145.558174] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [145.558257] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [145.558333] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [145.558407] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [145.558481] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [145.558556] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [145.558636] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [145.558718] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [145.558797] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [145.558873] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [145.558946] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [145.559020] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [145.559094] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [145.559198] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [145.559293] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [145.559375] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [145.559456] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [145.559535] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [145.559613] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [145.559694] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [145.559784] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [145.559867] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [145.559945] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [145.560021] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [145.560096] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [145.560189] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [145.560274] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [145.560353] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [145.560429] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [145.560900] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [145.560983] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [145.561061] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [145.561137] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [145.561469] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [145.561558] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [145.561642] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [145.561721] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [145.562015] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [145.562092] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [145.562179] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [145.562264] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [145.562345] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [145.562428] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [145.562508] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [145.562821] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [145.562901] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [145.562978] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [145.563053] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [145.563147] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [145.563243] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [145.563323] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [145.563986] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [145.568160] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [145.568267] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [145.568353] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [145.568432] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [145.568508] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [145.568580] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [145.568651] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [145.568721] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [145.568790] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [145.568860] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [145.568929] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [145.568999] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [145.569068] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [145.569136] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [145.569251] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [145.569415] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [145.571282] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [145.572742] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [145.573747] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [145.592772] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [145.603547] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [145.603862] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [145.604903] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [145.605033] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [145.605124] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [145.605219] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [145.605314] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [145.605395] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [145.605472] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [145.605547] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [145.605626] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [145.608660] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [145.608748] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [145.608826] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [145.610827] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [145.610923] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [145.615233] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [145.616502] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [145.618851] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [145.618959] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [145.619056] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [145.619157] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [145.619245] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [145.619330] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [145.619411] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [145.619491] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [145.619569] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [145.619650] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [145.619733] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [145.619815] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [145.619898] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [145.619981] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [145.621431] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [145.621925] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [145.622076] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [145.633144] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [145.633644] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [145.633879] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [145.634086] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [145.634343] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [145.634524] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [145.634705] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [145.634892] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [145.634895] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [145.634897] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [145.634899] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [145.634901] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [145.634903] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [145.634906] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [145.634908] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [145.634912] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [145.635317] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [145.635541] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [145.635758] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [145.635951] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [145.636156] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [145.636333] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [145.636518] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [145.636692] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [145.636855] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [145.637007] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [145.637323] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [145.637464] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [145.637614] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [145.637755] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [145.637894] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [145.638024] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [145.638165] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [145.638295] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [145.638423] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [145.638550] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [145.638813] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [145.638938] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [145.639067] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [145.639201] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [145.639326] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [145.639451] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [145.639576] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [145.639699] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [145.639811] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [145.639919] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [145.640153] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [145.640258] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [145.640366] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [145.640471] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [145.640586] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [145.640699] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [145.640800] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [145.640902] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [145.640998] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [145.641101] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [145.642727] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [145.642825] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [145.642919] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [145.643003] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [145.643087] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [145.643184] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [145.643277] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [145.643374] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [145.643464] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [145.643550] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [145.643634] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [145.643717] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [145.643799] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [145.643882] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [145.643964] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [145.644045] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [145.644133] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [145.644221] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [145.644306] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [145.644388] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [145.644468] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [145.644550] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [145.644632] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [145.644712] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [145.644793] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [145.644890] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [145.644988] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [145.645087] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [145.645184] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [145.645270] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [145.645353] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [145.645434] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [145.645515] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [145.645595] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [145.645674] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [145.645752] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [145.645978] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [145.646085] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [145.646189] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [145.646276] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [145.646356] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [145.646437] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [145.646516] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [145.646596] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [145.646673] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [145.646750] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [145.646825] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [145.646901] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [145.647106] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [145.647209] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [145.647295] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [145.647377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [145.647455] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [145.647533] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [145.647611] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [145.647688] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [145.647764] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [145.647845] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [145.647928] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [145.648008] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [145.648229] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [145.648310] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [145.648390] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [145.648477] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [145.648560] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [145.648639] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [145.648718] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [145.648794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [145.648871] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [145.648957] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [145.649037] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [145.649116] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [145.649547] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [145.652435] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [145.652542] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [145.652638] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [145.652730] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [145.652816] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [145.652899] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [145.652979] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [145.653058] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [145.653141] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [145.653217] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [145.653292] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [145.653366] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [145.653439] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [145.653511] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [145.653608] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [145.653712] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [145.654950] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [145.672824] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [145.683131] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [145.683443] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [145.683918] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [145.684017] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [145.685673] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [145.685821] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [145.697125] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [145.697580] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [145.697771] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [145.697931] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [145.698071] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [145.699515] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [145.699636] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [145.700127] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [145.700195] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [145.700328] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [145.700429] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [145.700529] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [145.701085] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [145.701254] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [145.701376] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [145.701483] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [145.701585] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [145.701680] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [145.701773] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [145.701862] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [145.701949] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [145.702036] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [145.702134] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [145.702240] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [145.702361] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [145.702474] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [145.702580] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [145.702676] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [145.702779] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [145.702890] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [145.703011] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [145.703102] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [145.703418] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [145.703580] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [145.703715] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [145.703846] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [145.704042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [145.704183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [145.704319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [145.704454] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<7> [145.705488] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [145.706184] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [145.706191] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [145.706507] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [145.706682] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [145.706796] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [145.707068] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [145.707277] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [145.707486] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<5> [145.708952] Creating 4 MTD partitions on "xe.nvm.768":
<5> [145.708978] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [145.710400] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-1] adding connector to sysfs
<7> [145.711613] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [145.714090] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-1] generating connector hotplug event
<7> [145.714187] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-1] adding connector to sysfs
<7> [145.714644] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-1] generating connector hotplug event
<7> [145.714701] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-2] adding connector to sysfs
<7> [145.715425] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<5> [145.715780] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [145.717716] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-2] generating connector hotplug event
<7> [145.717812] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-2] adding connector to sysfs
<7> [145.718774] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-2] generating connector hotplug event
<7> [145.718864] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-3] adding connector to sysfs
<7> [145.719716] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-3] generating connector hotplug event
<7> [145.719805] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-3] adding connector to sysfs
<7> [145.720855] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [145.722231] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-3] generating connector hotplug event
<7> [145.722295] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-4] adding connector to sysfs
<7> [145.722737] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-4] generating connector hotplug event
<5> [145.723434] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<6> [145.724742] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [145.725205] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [145.725981] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [145.726812] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [145.728612] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<6> [145.729134] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [145.729240] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [145.729391] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [145.731333] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [145.731737] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [145.731855] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [145.731952] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [145.732043] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [145.732155] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [145.732430] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [145.734400] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [145.734794] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [145.736310] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.736592] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [145.741128] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.741505] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [145.745995] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.746332] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [145.750761] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.751072] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [145.755618] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.755908] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [145.760293] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.760457] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [145.764595] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [145.764879] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [145.764989] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [145.764997] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [145.769223] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [145.769259] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [145.769263] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [145.773474] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [145.773480] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [145.773483] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [145.777952] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [145.777957] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [145.777961] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [145.782184] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [145.782188] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [145.782192] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [145.786310] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [145.786314] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [145.786317] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [145.790665] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [145.790670] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [145.790673] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [145.794820] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [145.794823] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [145.794831] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [145.794834] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [145.794836] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [145.794839] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [145.794841] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [145.794844] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [145.794846] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [145.794949] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [145.794963] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [145.795054] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [145.795082] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<6> [145.795116] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [145.795685] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [145.796270] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [145.796488] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [145.796627] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [145.796752] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [145.796869] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [145.796973] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [145.797072] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [145.797179] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [145.797275] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [145.797368] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [145.797461] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [145.797554] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [145.797646] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [145.797737] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [145.797828] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [145.797919] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [145.798012] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [145.798108] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [145.798201] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [145.798291] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [145.798380] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [145.798470] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [145.798559] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [145.798769] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [145.798952] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [145.798959] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<3> [145.800159] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [145.800184] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [145.800466] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [145.800475] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [145.803111] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [145.803122] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [145.803128] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [145.804111] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [145.807350] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [145.807358] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [145.807363] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [145.811553] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [145.811560] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [145.811565] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [145.812223] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [145.812649] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [145.812812] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [145.812956] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [145.815877] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [145.815885] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [145.815890] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [145.820191] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [145.820198] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [145.820203] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [145.824451] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [145.824458] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [145.824464] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [145.828670] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [145.828677] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [145.828687] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [145.828692] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [145.828696] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [145.828700] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [145.828704] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [145.828708] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [145.828712] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [145.828847] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [145.828865] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [145.828918] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [145.828943] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [145.828972] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [145.831472] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [145.831870] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [145.832088] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [145.832132] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [145.832394] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [145.832580] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [145.835176] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [145.839578] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [145.840035] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [145.841143] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<6> [145.841702] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [145.841709] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [145.841711] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [145.841838] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [145.841937] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [145.842043] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<7> [145.844567] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<6> [145.844985] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [145.845025] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [145.845027] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [145.845029] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [145.845030] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [145.845163] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [145.845301] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [145.845424] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [145.845745] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [145.845848] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [145.845955] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [145.846063] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [145.846175] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [145.846275] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [145.846574] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [145.846711] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [145.846828] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [145.846934] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [145.847244] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [145.847634] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [145.849241] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [145.849382] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [145.849497] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [145.849603] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [145.849707] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [145.849809] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [145.849910] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [145.850008] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [145.850128] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [145.850225] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [145.850321] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [145.850415] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [145.850520] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [145.850618] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [145.850713] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [145.850805] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [145.850896] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [145.850988] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [145.851079] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [145.851191] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [145.851291] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [145.851387] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [145.851479] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [145.851571] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [145.851662] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [145.851752] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [145.851840] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [145.851929] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [145.852017] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [145.852111] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [145.852202] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [145.852297] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [145.852394] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [145.852487] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [145.852578] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [145.852667] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [145.852997] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [145.858967] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<6> [145.860556] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<6> [145.861724] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<6> [145.862684] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [145.863875] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [145.864017] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [145.864153] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [145.864280] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [145.864396] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [145.864501] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [145.864608] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [145.864710] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [145.864807] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [145.864914] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [145.865013] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [145.865119] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [145.865252] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [145.865359] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [145.865461] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [145.865558] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [145.865651] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [145.865751] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [145.865856] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [145.865957] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [145.866058] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [145.866177] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [145.866292] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.866401] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [145.866498] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.866591] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [145.866682] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.866776] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [145.866876] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [145.866980] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [145.867313] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [145.867474] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [145.867803] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [145.879344] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [145.879618] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [145.879736] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [145.880041] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [145.880201] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [145.880622] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [145.880809] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [145.881115] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [145.881228] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [145.881822] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [145.882302] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [145.882427] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [145.882532] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [145.882632] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [145.882732] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [145.882835] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [145.882936] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [145.883026] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [145.883069] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [145.883143] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [145.883258] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [145.883375] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [145.883490] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [145.883589] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.883583] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [145.883685] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [145.883790] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [145.883767] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [145.883886] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [145.883932] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [145.883978] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [145.884069] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [145.884102] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [145.884177] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [145.884267] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [145.884266] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [145.884355] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.884424] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [145.884454] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [145.884556] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [145.884581] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [145.884650] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [145.884741] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.884737] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [145.884831] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [145.884924] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [145.884893] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [145.885011] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [145.885048] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [145.885114] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [145.885211] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [145.885210] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [145.885365] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [145.885519] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [145.885673] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [145.885827] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [145.885980] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [145.886137] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [145.889766] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [145.895713] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [145.896936] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [145.897158] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [145.897283] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [145.897637] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [145.897785] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [145.898249] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [145.898369] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [145.898809] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [145.898949] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [145.899259] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [145.899363] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [145.899747] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [145.899844] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [145.900233] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [145.900371] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [145.900655] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [145.900764] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [145.901304] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [145.901460] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [145.901794] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [145.901944] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [145.902243] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [145.902347] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [145.902448] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [145.902739] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [145.902836] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [145.902933] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [145.903235] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [145.903337] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [145.903437] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [145.903728] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [145.903835] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [145.903942] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [145.904241] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [145.904347] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [145.904449] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [145.904736] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [145.904835] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [145.904933] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [145.905224] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [145.905327] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [145.905425] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [145.905712] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [145.905811] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [145.905909] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [145.906209] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [145.906313] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [145.906411] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [145.906508] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [145.906604] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [145.906899] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [145.906996] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [145.907102] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [145.907197] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [145.907287] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [145.907575] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [145.907671] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [145.907758] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [145.907844] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [145.907932] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [145.908019] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [145.908114] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [145.908226] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [145.908338] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [145.908639] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [145.908745] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [145.908847] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [145.909148] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [145.909274] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-4] hw state readout: disabled
<7> [145.909593] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-5] hw state readout: disabled
<7> [145.909902] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-5] hw state readout: disabled
<7> [145.910009] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-6] hw state readout: disabled
<7> [145.910384] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-7] hw state readout: disabled
<7> [145.910487] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-6] hw state readout: disabled
<7> [145.910586] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-8] hw state readout: disabled
<7> [145.910672] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [145.910756] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [145.910839] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [145.910922] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [145.911005] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [145.911093] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [145.911179] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [145.911263] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [145.911345] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [145.911426] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [145.911506] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [145.911587] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [145.911669] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [145.911750] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [145.911835] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [145.911925] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [145.912013] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [145.912107] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [145.912201] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [145.912368] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [145.912500] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [145.912598] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [145.912701] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [145.912819] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [145.912914] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [145.913021] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [145.913137] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [145.913238] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [145.913557] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.913666] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.913770] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.913894] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [145.913992] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [145.914134] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [145.914252] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [145.914384] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [145.914719] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [145.915562] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [145.915681] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [145.915806] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [145.915912] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [145.916012] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [145.919107] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [145.922335] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [145.922454] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [145.922547] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [145.922634] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [145.922718] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [145.922801] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [145.922883] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [145.922963] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [145.923043] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [145.923139] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [145.923221] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [145.923306] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [145.923386] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [145.923464] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [145.923541] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [145.923670] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [145.935097] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [145.935864] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [145.935989] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [145.936088] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [145.936174] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [145.936257] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [145.936337] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [146.023770] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [146.023772] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [146.023885] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [146.023999] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [146.024113] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [146.024222] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [146.024346] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [146.024458] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [146.024589] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [146.024670] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [146.024752] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [146.024829] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [146.024953] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [146.025032] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [146.025120] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [146.025215] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [146.026567] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [146.026663] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [146.026757] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [146.026848] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [146.026944] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [146.027035] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [146.027138] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [146.027228] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [146.027318] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [146.027400] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [146.027483] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [146.027565] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [146.027647] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [146.027729] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [146.027811] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [146.027892] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [146.027973] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [146.028064] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [146.028156] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [146.028239] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [146.028321] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [146.028400] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [146.028478] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [146.028559] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [146.028644] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [146.028728] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [146.028816] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [146.028900] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [146.028979] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [146.029062] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [146.029151] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [146.029238] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [146.029316] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [146.029401] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [146.029484] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [146.029565] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [146.029645] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [146.029725] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [146.029812] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [146.029899] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [146.029988] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [146.030080] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [146.030437] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [146.030528] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [146.030614] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [146.030696] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [146.031045] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [146.031141] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [146.031221] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [146.031299] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [146.031642] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [146.031732] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [146.031816] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [146.031902] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [146.031992] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [146.032083] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [146.032168] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [146.032544] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [146.032631] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [146.032716] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [146.032808] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [146.032896] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [146.032980] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [146.033066] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [146.033632] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [146.038259] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [146.038349] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [146.038429] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [146.038506] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [146.038581] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [146.038655] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [146.038728] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [146.038800] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [146.038872] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [146.038942] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [146.039014] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [146.039094] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [146.039170] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [146.039246] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [146.039344] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [146.039449] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [146.041716] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [146.042875] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [146.044640] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [146.065014] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [146.075886] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [146.076319] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [146.077145] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [146.077254] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [146.077346] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [146.077430] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [146.077515] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [146.077599] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [146.077680] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [146.077766] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [146.077854] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [146.080239] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [146.080354] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [146.080454] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [146.082327] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [146.082427] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [146.085836] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [146.087163] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [146.089231] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [146.089333] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [146.089421] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [146.089505] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [146.089585] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [146.089664] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [146.089742] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [146.089822] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [146.089899] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [146.089977] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [146.090061] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [146.090138] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [146.090214] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [146.090294] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [146.090872] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [146.091311] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [146.091447] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [146.112071] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [146.112646] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [146.112917] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [146.113171] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [146.113380] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [146.113585] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [146.113791] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [146.113990] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [146.113993] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [146.113995] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [146.113998] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [146.114000] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [146.114002] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [146.114004] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [146.114007] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [146.114018] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [146.114475] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [146.114728] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [146.114966] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [146.115205] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [146.115425] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [146.115623] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [146.115814] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [146.115992] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [146.116194] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [146.116373] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [146.116720] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [146.116872] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [146.117030] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [146.117207] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [146.117368] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [146.117523] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [146.117676] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [146.117820] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [146.117957] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [146.118121] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [146.118403] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [146.118538] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [146.118677] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [146.118811] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [146.118937] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [146.119066] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [146.119197] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [146.119335] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [146.119459] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [146.119580] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [146.119832] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [146.119959] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [146.120083] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [146.120199] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [146.120312] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [146.120419] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [146.120523] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [146.120629] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [146.120737] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [146.120856] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [146.122153] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [146.122267] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [146.122376] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [146.122472] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [146.122565] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [146.122657] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [146.122749] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [146.122847] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [146.122940] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [146.123027] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [146.123122] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [146.123206] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [146.123290] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [146.123370] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [146.123448] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [146.123525] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [146.123603] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [146.123682] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [146.123757] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [146.123835] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [146.123912] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [146.123989] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [146.124072] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [146.124158] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [146.124242] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [146.124342] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [146.124437] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [146.124528] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [146.124616] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [146.124702] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [146.124787] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [146.124871] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [146.124954] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [146.125037] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [146.125136] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [146.125224] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [146.125495] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [146.125585] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [146.125669] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [146.125752] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [146.125833] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [146.125916] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [146.126004] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [146.126097] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [146.126179] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [146.126258] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [146.126336] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [146.126416] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [146.126664] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [146.126759] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [146.126850] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [146.126937] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [146.127018] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [146.127107] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [146.127186] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [146.127264] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [146.127343] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [146.127422] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [146.127504] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [146.127591] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [146.127850] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [146.127937] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [146.128029] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [146.128134] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [146.128220] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [146.128303] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [146.128391] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [146.128477] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [146.128561] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [146.128641] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [146.128720] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [146.128798] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [146.129268] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [146.133331] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [146.133429] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [146.133518] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [146.133605] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [146.133690] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [146.133777] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [146.133858] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [146.133938] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [146.134018] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [146.134105] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [146.134183] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [146.134259] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [146.134332] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [146.134406] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [146.134501] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [146.134607] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [146.135990] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [146.155933] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [146.166806] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [146.167222] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [146.167829] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [146.167940] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [146.169673] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [146.169776] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [146.182046] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [146.182553] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [146.182770] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [146.182967] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [146.183181] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<5> [146.189225] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [146.189242] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [146.194147] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [146.199920] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [146.204740] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [146.211398] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [146.216750] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [146.217010] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [146.217214] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [146.217744] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [146.217869] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [146.218088] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [146.218268] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [146.218578] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [146.219373] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [146.219531] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [146.219669] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [146.219983] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [146.220168] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [146.220296] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [146.220389] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [146.220480] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [146.220570] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [146.220658] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [146.220842] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [146.221072] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [146.221274] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [146.221461] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [146.221656] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [146.221918] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [146.222030] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [146.222229] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [146.222489] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [146.222730] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [146.223227] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [146.223435] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [146.223771] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [146.224126] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [146.224446] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [146.224836] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [146.225140] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [146.225376] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [146.225660] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<7> [146.226505] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [146.226873] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [146.227183] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [146.227433] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [146.227672] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [146.227829] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [146.228073] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<6> [146.228386] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [146.229491] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [146.232526] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-4] adding connector to sysfs
<7> [146.234039] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [146.236810] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-4] generating connector hotplug event
<7> [146.236912] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-5] adding connector to sysfs
<7> [146.237663] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-5] generating connector hotplug event
<7> [146.237743] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-5] adding connector to sysfs
<7> [146.238475] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [146.239676] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-5] generating connector hotplug event
<7> [146.239752] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-6] adding connector to sysfs
<7> [146.240142] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-6] generating connector hotplug event
<7> [146.240186] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-7] adding connector to sysfs
<7> [146.240497] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-7] generating connector hotplug event
<7> [146.240539] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-6] adding connector to sysfs
<7> [146.240981] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [146.241955] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-6] generating connector hotplug event
<7> [146.242004] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-8] adding connector to sysfs
<7> [146.242355] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-8] generating connector hotplug event
<6> [146.242388] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [146.242480] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [146.242621] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [146.243542] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [146.243981] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [146.244104] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [146.244207] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [146.244300] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [146.244386] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [146.244562] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [146.247827] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.247941] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [146.252109] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.252219] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [146.256372] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.256477] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [146.260625] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.260735] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [146.264957] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.265066] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [146.269228] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.269367] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [146.273526] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.273818] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [146.273910] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4]
<7> [146.273915] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [146.278128] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected
<7> [146.278141] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5]
<7> [146.278147] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [146.282433] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected
<7> [146.282441] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5]
<7> [146.282446] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [146.286730] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected
<7> [146.286737] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6]
<7> [146.286742] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [146.291071] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected
<7> [146.291083] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7]
<7> [146.291089] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [146.295397] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected
<7> [146.295405] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6]
<7> [146.295411] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [146.299676] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected
<7> [146.299685] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8]
<7> [146.299690] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [146.304002] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected
<7> [146.304008] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [146.304027] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no
<7> [146.304032] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no
<7> [146.304036] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no
<7> [146.304040] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no
<7> [146.304044] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no
<7> [146.304048] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no
<7> [146.304052] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no
<7> [146.304090] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [146.304101] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [146.304137] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [146.304143] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [146.305106] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [146.305081] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [146.305222] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [146.305306] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4]
<7> [146.305312] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [146.305337] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [146.305443] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [146.305543] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [146.305646] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [146.305751] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [146.305852] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [146.305949] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [146.306068] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [146.306172] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [146.306275] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [146.306382] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [146.306484] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [146.306582] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [146.306679] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [146.306790] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [146.306898] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [146.306998] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [146.307111] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [146.307233] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [146.307340] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [146.309498] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected
<7> [146.309507] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5]
<7> [146.309511] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [146.313733] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected
<7> [146.313739] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5]
<7> [146.313742] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [146.317983] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected
<7> [146.317988] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6]
<7> [146.317991] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [146.322179] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected
<7> [146.322184] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7]
<7> [146.322187] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [146.324020] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<6> [146.325836] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [146.326358] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected
<7> [146.326363] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6]
<7> [146.326366] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [146.326940] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [146.327162] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [146.327205] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [146.327517] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [146.327660] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [146.330279] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [146.330618] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected
<7> [146.330624] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8]
<7> [146.330628] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [146.331078] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [146.331453] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [146.333295] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [146.335358] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [146.335760] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [146.336110] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [146.336426] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [146.336668] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [146.336975] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected
<7> [146.336983] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [146.336992] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no
<7> [146.336997] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no
<7> [146.337001] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no
<7> [146.337010] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no
<7> [146.337014] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no
<7> [146.337018] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no
<7> [146.337022] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no
<7> [146.337147] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [146.337174] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [146.337257] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [146.337273] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [146.337318] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [146.337247] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [146.337332] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [146.337600] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [146.337878] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [146.338391] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [146.338605] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [146.338930] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [146.339281] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [146.344146] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [146.357466] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [146.357534] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [146.357747] [IGT] xe_module_load: exiting, ret=0
|