Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.27 seconds |
| Igt-Version |
IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4296-cab246648fd89efbe+ x86_64) |
| Out |
Using IGT_SRANDOM=1766487427 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.274s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.274s) |
| Dmesg |
<6> [180.826065] [IGT] xe_module_load: executing
<4> [180.826110] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [180.829689] [IGT] xe_module_load: starting subtest load
<6> [180.982542] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0
<4> [180.982548] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [180.982550] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [180.982551] nvme 0000:05:00.0: [ 0] RxErr (First)
<6> [180.983597] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0
<4> [180.983599] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [180.983601] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001000/00002000
<4> [180.983602] pcieport 0000:00:06.0: [12] Timeout
<6> [180.985589] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0 (no details found
<6> [180.985593] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:00:06.0
<4> [180.985595] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [180.985596] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001100/00002000
<4> [180.985597] pcieport 0000:00:06.0: [ 8] Rollover
<4> [180.985598] pcieport 0000:00:06.0: [12] Timeout
<6> [181.092219] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0
<4> [181.092224] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [181.092225] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [181.092227] nvme 0000:05:00.0: [ 0] RxErr (First)
<5> [181.156260] Setting dangerous option force_probe - tainting kernel
<6> [181.159600] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [181.161262] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [181.161817] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [181.161825] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [181.161936] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [181.162036] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [181.162142] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [181.165113] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [181.165141] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [181.165143] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [181.165145] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [181.165146] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [181.165270] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [181.165427] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [181.165545] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [181.165870] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [181.165974] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [181.166076] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [181.166187] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [181.166289] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [181.166408] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [181.166733] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [181.166855] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [181.166965] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [181.167075] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [181.167388] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [181.167766] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [181.181679] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [181.181788] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [181.181891] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [181.181999] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [181.182105] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [181.182205] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [181.182314] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [181.182410] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [181.182501] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [181.182602] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [181.182696] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [181.182787] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [181.182877] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [181.182970] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [181.183072] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [181.183167] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [181.183260] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [181.183373] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [181.183478] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [181.183572] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [181.183665] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [181.183757] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [181.183846] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.183936] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [181.184024] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.184113] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [181.184202] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.184292] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.184399] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [181.184493] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [181.184828] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [181.184976] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [181.185326] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [181.185501] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [181.185886] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [181.185994] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [181.186304] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [181.186432] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [181.186765] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
<7> [181.186790] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [181.186919] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [181.187231] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [181.187343] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [181.188216] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [181.189026] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [181.189392] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [181.189511] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [181.189617] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [181.189713] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [181.189801] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [181.189884] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [181.189967] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [181.190046] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [181.190125] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [181.190204] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [181.190283] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [181.190375] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [181.190457] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [181.190536] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [181.190616] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [181.190696] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [181.190775] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [181.192487] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [181.192622] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [181.192740] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [181.192849] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [181.192951] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [181.193049] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [181.193148] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [181.193241] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [181.193349] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [181.193445] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [181.193538] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [181.193630] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [181.193722] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.193813] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [181.193912] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [181.194008] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [181.194108] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [181.194202] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [181.194293] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [181.194397] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [181.194485] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.194572] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [181.194662] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [181.194752] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [181.194839] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.194924] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [181.195015] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [181.195107] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [181.195201] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.195191] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [181.195297] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [181.201748] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [181.201891] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [181.202007] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [181.202617] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [181.203273] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [181.203833] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [181.203959] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [181.204377] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [181.204914] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [181.205218] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [181.205352] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<6> [181.205501] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [181.205768] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [181.205866] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [181.206247] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [181.206425] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [181.206774] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [181.206893] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [181.207502] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [181.207651] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [181.207992] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [181.208128] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [181.208741] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [181.209045] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [181.209139] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [181.209234] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [181.209549] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [181.209680] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [181.209996] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [181.210097] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [181.210193] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [181.210498] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [181.210594] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [181.210683] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [181.210975] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [181.211064] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [181.211152] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [181.211449] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [181.211551] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [181.211646] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [181.211941] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [181.212030] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [181.212119] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [181.212413] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [181.212500] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [181.212586] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [181.212877] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [181.212962] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [181.213046] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [181.213129] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [181.213213] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [181.213509] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [181.213606] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [181.213696] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [181.213783] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [181.213870] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [181.214161] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [181.214249] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [181.214426] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [181.214540] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [181.214633] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [181.214722] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [181.214810] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [181.214920] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [181.215025] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [181.215340] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [181.215441] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [181.215546] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [181.215848] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [181.215956] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-1] hw state readout: disabled
<7> [181.216067] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-1] hw state readout: disabled
<7> [181.216378] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-2] hw state readout: disabled
<7> [181.216485] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-2] hw state readout: disabled
<7> [181.216583] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-3] hw state readout: disabled
<7> [181.216879] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-3] hw state readout: disabled
<7> [181.216971] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-4] hw state readout: disabled
<7> [181.217059] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [181.217145] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [181.217234] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [181.217329] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [181.217416] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [181.217502] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [181.217587] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [181.217674] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [181.217763] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [181.217851] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [181.217938] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [181.218026] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [181.218115] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [181.218203] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [181.218293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [181.218428] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [181.218538] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [181.218635] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [181.218728] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [181.218820] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [181.218910] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [181.218997] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [181.219083] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [181.219170] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [181.219255] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [181.219403] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [181.219494] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [181.219580] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [181.219870] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.219971] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.220068] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.220164] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.220258] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [181.220389] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [181.220504] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [181.220606] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [181.220932] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [181.221109] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [181.221223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [181.221333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [181.221441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [181.221546] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [181.226176] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [181.229473] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [181.229580] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [181.229670] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [181.229752] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [181.229831] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [181.229906] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [181.229980] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [181.230053] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [181.230125] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [181.230197] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [181.230272] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [181.230362] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [181.230435] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [181.230507] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [181.230580] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [181.230695] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [181.241306] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [181.242201] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [181.242451] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [181.242542] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [181.242624] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [181.242702] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [181.242782] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [181.329433] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [181.329435] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [181.329598] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [181.329699] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [181.329796] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [181.329882] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [181.329998] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [181.330110] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [181.330232] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [181.330314] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [181.330400] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [181.330478] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [181.330609] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [181.330683] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [181.330767] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [181.330843] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [181.332119] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [181.332200] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [181.332281] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [181.332377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [181.332455] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [181.332537] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [181.332613] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [181.332686] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [181.332769] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [181.332846] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [181.332922] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [181.332996] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [181.333069] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [181.333145] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [181.333217] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [181.333288] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [181.333374] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [181.333448] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [181.333524] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [181.333590] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [181.333657] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [181.333727] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [181.333799] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [181.333869] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [181.333937] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [181.334006] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [181.334096] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [181.334184] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [181.334265] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [181.334360] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [181.334439] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [181.334518] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [181.334594] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [181.334673] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [181.334749] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [181.334820] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [181.334892] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [181.334960] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [181.335032] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [181.335105] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [181.335177] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [181.335248] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [181.335587] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [181.335664] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [181.335735] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [181.335802] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [181.336098] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [181.336177] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [181.336252] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [181.336341] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [181.336643] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [181.336723] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [181.336797] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [181.336868] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [181.336938] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [181.337010] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [181.337083] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [181.337402] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [181.337483] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [181.337562] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [181.337633] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [181.337702] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [181.337770] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [181.337836] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [181.338348] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [181.342876] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [181.342962] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [181.343041] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [181.343119] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [181.343195] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [181.343267] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [181.343356] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [181.343440] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [181.343516] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [181.343589] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [181.343662] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [181.343736] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [181.343809] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [181.343883] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [181.343981] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [181.344143] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [181.345862] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [181.347323] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [181.348348] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [181.369172] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [181.379986] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [181.380312] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [181.381119] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [181.381233] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [181.381348] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [181.381430] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [181.381512] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [181.381590] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [181.381665] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [181.381742] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [181.381821] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [181.384314] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [181.384416] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [181.384499] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [181.386273] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [181.386382] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [181.390332] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [181.391605] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [181.393741] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [181.393833] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [181.393916] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [181.393995] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [181.394075] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [181.394151] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [181.394225] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [181.394306] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [181.394383] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [181.394455] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [181.394528] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [181.394598] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [181.394666] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [181.394734] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [181.396025] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [181.396492] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [181.396615] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [181.407309] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [181.407660] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [181.407783] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [181.407884] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [181.407981] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [181.408076] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [181.408170] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [181.408262] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [181.408263] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [181.408265] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [181.408266] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [181.408267] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [181.408268] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [181.408269] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [181.408271] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [181.408274] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [181.408571] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [181.408705] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.408820] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.408922] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.409019] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.409110] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.409199] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.409293] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.409418] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.409505] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.409689] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [181.409776] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.409863] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.409945] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.410029] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.410108] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.410187] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.410267] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.410356] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.410435] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.410604] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [181.410680] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.410760] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.410845] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.410933] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.411013] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.411092] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.411172] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.411251] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.411343] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.411512] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [181.411589] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.411671] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.411750] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.411833] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.411910] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.411990] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.412079] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.412163] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.412244] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.413490] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [181.413585] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [181.413677] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [181.413759] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [181.413839] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [181.413915] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [181.413993] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [181.414084] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [181.414168] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [181.414247] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [181.414334] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [181.414410] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [181.414485] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [181.414559] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [181.414633] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [181.414704] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [181.414776] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [181.414849] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [181.414919] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [181.414991] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [181.415061] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [181.415139] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [181.415218] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [181.415294] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [181.415387] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [181.415478] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [181.415566] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [181.415649] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [181.415729] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [181.415809] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [181.415887] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [181.415971] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [181.416054] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [181.416134] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [181.416210] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [181.416285] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [181.416526] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [181.416613] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [181.416697] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [181.416779] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [181.416857] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [181.416932] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [181.417007] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [181.417080] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [181.417152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [181.417224] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [181.417294] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [181.417399] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [181.417595] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [181.417672] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [181.417756] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [181.417838] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [181.417916] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [181.417992] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [181.418066] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [181.418140] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [181.418217] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [181.418294] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [181.418387] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [181.418460] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [181.418664] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [181.418754] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [181.418842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [181.418925] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [181.419007] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [181.419088] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [181.419165] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [181.419240] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [181.419322] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [181.419401] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [181.419481] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [181.419559] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [181.419964] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [181.422781] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [181.422878] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [181.422962] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [181.423043] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [181.423123] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [181.423201] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [181.423280] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [181.423381] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [181.423460] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [181.423535] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [181.423609] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [181.423682] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [181.423754] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [181.423826] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [181.423918] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [181.424017] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [181.425234] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [181.444310] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [181.455084] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [181.455388] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [181.455865] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [181.455965] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [181.457228] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [181.457328] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [181.469327] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [181.470025] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.470177] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.470339] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.470507] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.472116] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [181.472274] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [181.472903] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [181.472956] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [181.473056] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [181.473148] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [181.473234] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [181.473776] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [181.473907] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [181.474022] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [181.474128] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [181.474226] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [181.474328] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [181.474423] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [181.474515] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [181.474617] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [181.474719] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [181.474818] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [181.474927] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [181.475037] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [181.475137] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [181.475233] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [181.475336] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [181.475431] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [181.475529] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [181.475619] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [181.475703] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [181.475982] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [181.476114] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [181.476241] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [181.476361] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [181.476508] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [181.476627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [181.476736] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [181.476854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<7> [181.477638] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [181.477877] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [181.478409] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [181.478654] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [181.478804] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [181.479012] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [181.479261] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [181.479760] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [181.480462] Creating 4 MTD partitions on "xe.nvm.768":
<5> [181.480478] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [181.480774] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.483282] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-1] adding connector to sysfs
<7> [181.484928] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [181.486981] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-1] generating connector hotplug event
<7> [181.487068] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-1] adding connector to sysfs
<7> [181.487410] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-1] generating connector hotplug event
<7> [181.487449] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-2] adding connector to sysfs
<7> [181.487850] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<5> [181.487929] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [181.489059] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-2] generating connector hotplug event
<7> [181.489121] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-2] adding connector to sysfs
<7> [181.489684] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-2] generating connector hotplug event
<7> [181.489746] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-3] adding connector to sysfs
<7> [181.490193] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-3] generating connector hotplug event
<7> [181.490244] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-3] adding connector to sysfs
<7> [181.491011] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [181.492090] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-3] generating connector hotplug event
<7> [181.492145] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-4] adding connector to sysfs
<7> [181.492781] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-4] generating connector hotplug event
<5> [181.494718] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<6> [181.495383] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [181.495762] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [181.496368] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.496814] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [181.502386] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<6> [181.505323] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [181.505433] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [181.505642] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [181.507506] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.507674] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [181.507980] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [181.508192] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [181.508408] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [181.508579] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [181.508750] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [181.508918] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [181.509754] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [181.512434] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.512581] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [181.516744] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.516888] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [181.521126] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.521314] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [181.525537] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.525660] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [181.529859] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.529976] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [181.534213] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.534330] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [181.538569] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.538890] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<6> [181.539092] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [181.539176] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [181.539192] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [181.539699] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [181.540813] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.543704] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [181.543759] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [181.543766] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<3> [181.544344] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [181.544359] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [181.544527] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [181.544534] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [181.548188] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [181.548196] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [181.548201] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [181.552700] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [181.552711] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [181.552717] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [181.556932] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [181.556942] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [181.556947] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [181.561177] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [181.561185] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [181.561190] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [181.565900] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [181.565911] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [181.565916] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [181.570346] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [181.570353] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [181.570360] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [181.570363] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [181.570365] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [181.570368] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [181.570370] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [181.570372] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [181.570375] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [181.570474] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [181.570487] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [181.570529] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [181.570540] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [181.572106] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [181.572078] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [181.572217] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [181.572370] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [181.572366] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [181.572380] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [181.572482] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [181.572584] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [181.572693] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [181.572799] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [181.572919] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [181.573050] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [181.573177] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [181.573288] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [181.573411] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [181.573505] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [181.573603] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [181.573707] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [181.573810] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [181.573926] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [181.574037] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [181.574130] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [181.574222] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [181.574318] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [181.574419] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [181.575315] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [181.576674] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [181.576687] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [181.576693] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [181.580928] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [181.580938] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [181.580945] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [181.584567] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [181.584589] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [181.584727] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [181.584780] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [181.584836] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [181.584936] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [181.584986] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [181.585031] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [181.585124] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [181.585198] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [181.585225] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [181.585357] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [181.585446] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [181.585456] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [181.585451] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [181.585461] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [181.585541] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [181.585629] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [181.585716] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [181.585803] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [181.585888] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [181.585974] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [181.586068] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [181.586158] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [181.586247] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [181.586346] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [181.586434] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [181.586519] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [181.586602] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [181.586685] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [181.586768] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [181.586849] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [181.586940] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [181.587030] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [181.587117] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [181.587205] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [181.587291] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [181.587393] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [181.587477] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [181.587566] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [181.587656] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [181.587744] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [181.587831] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [181.588423] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.589757] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [181.589766] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [181.589772] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<6> [181.591949] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [181.592482] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [181.592676] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [181.592711] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<6> [181.592902] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<7> [181.592978] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [181.593156] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [181.593944] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [181.593951] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [181.593955] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<6> [181.594271] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<6> [181.594918] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<6> [181.597770] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [181.598225] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [181.598234] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [181.598239] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [181.598338] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.603221] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [181.603233] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [181.603241] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [181.603246] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [181.603249] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [181.603253] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [181.603258] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [181.603261] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [181.603265] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [181.603393] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [181.603409] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [181.603471] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [181.603482] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [181.603513] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [181.607995] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [181.608694] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [181.610137] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<6> [181.611218] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [181.611235] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [181.611430] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [181.611598] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [181.611780] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<7> [181.613695] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [181.615875] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [181.616275] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [181.616278] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [181.616281] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [181.616283] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [181.616489] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [181.616715] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [181.616897] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [181.617283] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [181.617513] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [181.618051] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [181.618232] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [181.618415] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [181.618592] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [181.618967] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [181.619181] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [181.619384] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [181.619573] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [181.619967] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [181.620677] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [181.620984] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [181.637410] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [181.637533] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [181.637644] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [181.637750] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [181.637850] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [181.637948] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [181.638045] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [181.638145] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [181.638244] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [181.638362] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [181.638458] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [181.638552] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [181.638644] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [181.638736] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [181.638828] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [181.638923] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [181.639017] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [181.639108] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [181.639202] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [181.639295] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [181.639415] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [181.639512] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [181.639655] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.639762] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [181.639857] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.639950] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [181.640038] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.640134] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [181.640230] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [181.640336] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [181.640673] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [181.640816] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [181.641159] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [181.641307] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [181.641749] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [181.641855] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [181.642158] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [181.642305] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [181.642751] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [181.642942] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [181.643261] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [181.643573] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [181.644093] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [181.644632] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [181.644751] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [181.644854] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [181.644951] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [181.645054] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [181.645151] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [181.645190] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [181.645250] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [181.645353] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [181.645468] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [181.645561] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [181.645550] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [181.645655] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [181.645673] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [181.645753] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [181.645774] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [181.645848] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.645869] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [181.645939] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [181.645960] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [181.646033] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [181.646048] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [181.646122] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [181.646135] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [181.646211] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [181.646221] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [181.646315] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [181.646308] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [181.646402] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [181.646415] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [181.646492] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [181.646506] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [181.646578] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [181.646594] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.646662] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [181.646684] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [181.646745] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [181.646777] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [181.646833] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [181.646874] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [181.646918] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [181.646970] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.647001] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [181.647064] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [181.647159] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [181.647248] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [181.647362] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [181.647468] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [181.652304] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [181.657951] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [181.658993] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [181.659133] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [181.659243] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [181.659630] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [181.659836] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [181.660575] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [181.660734] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [181.661335] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [181.661772] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [181.662108] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [181.662229] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [181.662670] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [181.662773] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [181.663145] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [181.663282] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [181.663591] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [181.663691] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [181.664174] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [181.664355] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [181.664699] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [181.664845] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [181.665137] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [181.665235] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [181.665354] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [181.665689] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [181.665831] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [181.666148] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [181.666677] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [181.666981] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [181.667088] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [181.667188] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [181.667487] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [181.667582] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [181.667677] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [181.667962] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [181.668070] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [181.668178] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [181.668491] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [181.668589] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [181.668682] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [181.668967] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [181.669060] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [181.669151] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [181.669443] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [181.669538] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [181.669632] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [181.669716] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [181.669799] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [181.669881] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [181.669968] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [181.670258] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [181.670353] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [181.670437] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [181.670520] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [181.670600] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [181.670878] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [181.670967] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [181.671047] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [181.671125] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [181.671204] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [181.671289] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [181.671392] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [181.671505] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [181.671608] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [181.671907] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [181.672012] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [181.672115] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [181.672414] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [181.672518] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-4] hw state readout: disabled
<7> [181.672625] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-5] hw state readout: disabled
<7> [181.672924] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-5] hw state readout: disabled
<7> [181.673028] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-6] hw state readout: disabled
<7> [181.673127] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-7] hw state readout: disabled
<7> [181.673422] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-6] hw state readout: disabled
<7> [181.673518] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-8] hw state readout: disabled
<7> [181.673604] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [181.673688] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [181.673773] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [181.673864] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [181.673952] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [181.674037] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [181.674120] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [181.674201] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [181.674282] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [181.674376] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [181.674457] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [181.674538] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [181.674619] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [181.674708] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [181.674794] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [181.674875] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [181.674955] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [181.675035] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [181.675113] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [181.675191] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [181.675269] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [181.675375] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [181.675458] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [181.675543] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [181.675633] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [181.675720] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [181.675804] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [181.675886] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [181.676174] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.676284] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.676404] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.676504] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [181.676600] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [181.676724] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [181.676837] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [181.676946] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [181.677270] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [181.677448] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [181.677561] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [181.677672] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [181.677776] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [181.677877] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [181.680948] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [181.684184] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [181.684290] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [181.684396] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [181.684476] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [181.684551] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [181.684626] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [181.684700] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [181.684773] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [181.684845] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [181.684917] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [181.684987] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [181.685058] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [181.685133] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [181.685207] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [181.685282] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [181.685423] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [181.696364] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [181.697120] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [181.697233] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [181.697330] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [181.697410] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [181.697487] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [181.697561] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [181.783919] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [181.783922] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [181.784028] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [181.784127] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [181.784226] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [181.784320] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [181.784488] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [181.784613] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [181.784733] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [181.784813] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [181.784888] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [181.784964] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [181.785091] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [181.785166] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [181.785246] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [181.785346] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [181.786685] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [181.786780] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [181.786874] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [181.786961] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [181.787048] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [181.787137] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [181.787223] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [181.787311] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [181.787399] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [181.787483] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [181.787572] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [181.787656] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [181.787737] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [181.787820] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [181.787899] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [181.787976] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [181.788051] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [181.788130] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [181.788212] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [181.788303] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [181.788390] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [181.788474] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [181.788548] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [181.788621] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [181.788693] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [181.788764] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [181.788846] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [181.788926] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [181.789003] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [181.789081] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [181.789155] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [181.789231] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [181.789318] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [181.789413] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [181.789501] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [181.789583] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [181.789660] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [181.789736] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [181.789818] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [181.789901] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [181.789993] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [181.790081] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [181.790442] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [181.790534] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [181.790611] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [181.790681] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [181.791020] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [181.791092] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [181.791161] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [181.791232] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [181.791585] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [181.791659] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [181.791732] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [181.791811] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [181.791887] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [181.791959] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [181.792028] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [181.792379] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [181.792456] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [181.792533] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [181.792609] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [181.792694] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [181.792772] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [181.792849] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [181.793438] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [181.798121] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [181.798212] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [181.798293] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [181.798391] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [181.798471] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [181.798549] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [181.798622] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [181.798694] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [181.798765] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [181.798835] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [181.798907] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [181.798979] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [181.799050] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [181.799121] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [181.799218] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [181.799323] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [181.801648] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [181.802850] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [181.804647] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [181.825224] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [181.836078] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [181.836490] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [181.837246] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [181.837366] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [181.837454] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [181.837535] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [181.837617] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [181.837696] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [181.837776] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [181.837860] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [181.837948] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [181.840429] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [181.840520] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [181.840601] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [181.842845] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [181.842939] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [181.846425] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [181.847753] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [181.849858] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [181.849951] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [181.850037] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [181.850120] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [181.850197] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [181.850275] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [181.850364] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [181.850440] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [181.850514] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [181.850587] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [181.850660] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [181.850732] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [181.850803] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [181.850875] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [181.851486] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [181.851924] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [181.852059] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [181.863317] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [181.863704] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [181.863837] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [181.863941] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [181.864041] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [181.864137] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [181.864226] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [181.864331] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [181.864333] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [181.864334] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [181.864336] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [181.864337] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [181.864338] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [181.864339] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [181.864340] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [181.864355] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [181.864581] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [181.864706] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.864828] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.864940] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.865052] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.865156] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.865259] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.865371] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.865465] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.865556] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.865745] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [181.865838] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.865933] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.866023] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.866112] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.866192] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.866280] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.866379] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.866462] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.866543] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.866716] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [181.866792] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.866872] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.866950] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.867032] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.867118] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.867204] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.867285] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.867389] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.867470] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.867644] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [181.867725] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [181.867814] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [181.867897] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [181.867980] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [181.868060] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [181.868138] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [181.868218] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [181.868294] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [181.868400] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [181.869674] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [181.869770] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [181.869865] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [181.869949] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [181.870039] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [181.870129] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [181.870215] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [181.870311] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [181.870397] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [181.870480] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [181.870563] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [181.870643] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [181.870719] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [181.870792] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [181.870865] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [181.870937] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [181.871008] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [181.871082] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [181.871153] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [181.871227] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [181.871310] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [181.871388] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [181.871460] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [181.871531] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [181.871601] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [181.871689] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [181.871776] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [181.871862] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [181.871948] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [181.872033] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [181.872114] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [181.872191] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [181.872267] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [181.872359] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [181.872444] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [181.872526] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [181.872757] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [181.872843] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [181.872926] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [181.873004] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [181.873079] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [181.873153] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [181.873226] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [181.873297] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [181.873390] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [181.873470] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [181.873547] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [181.873621] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [181.873854] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [181.873946] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [181.874033] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [181.874116] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [181.874192] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [181.874267] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [181.874360] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [181.874437] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [181.874512] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [181.874585] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [181.874657] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [181.874731] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [181.874964] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [181.875049] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [181.875130] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [181.875208] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [181.875284] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [181.875379] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [181.875455] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [181.875529] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [181.875610] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [181.875688] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [181.875764] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [181.875838] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [181.876259] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [181.880064] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [181.880155] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [181.880238] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [181.880322] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [181.880398] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [181.880474] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [181.880547] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [181.880619] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [181.880692] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [181.880761] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [181.880831] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [181.880901] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [181.880971] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [181.881041] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [181.881133] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [181.881232] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [181.882602] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [181.902400] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [181.912320] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [181.912700] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [181.913245] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [181.913363] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [181.915248] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [181.915353] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [181.927314] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [181.927744] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.927910] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.928065] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [181.928207] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<5> [181.934150] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [181.934167] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [181.942732] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [181.948015] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [181.953184] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [181.959770] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.963013] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.963095] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [181.963218] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [181.963722] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [181.963824] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [181.964107] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [181.964341] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [181.964543] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [181.966114] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [181.966373] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [181.966502] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [181.966623] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [181.966745] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [181.966864] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [181.967054] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [181.967257] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [181.967434] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [181.967549] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [181.967686] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [181.967798] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [181.967900] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [181.968082] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [181.968275] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [181.968378] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [181.968585] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [181.968783] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [181.969000] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [181.969185] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.969166] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [181.969704] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [181.970012] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [181.970235] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [181.970401] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [181.970546] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [181.970683] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [181.970802] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [181.970905] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<7> [181.971513] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [181.971670] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [181.972003] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [181.972321] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [181.972481] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [181.972805] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [181.973211] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<6> [181.973333] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [181.973685] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [181.975419] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-4] adding connector to sysfs
<7> [181.978066] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [181.982130] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-4] generating connector hotplug event
<7> [181.982252] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-5] adding connector to sysfs
<7> [181.985572] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-5] generating connector hotplug event
<7> [181.985625] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-5] adding connector to sysfs
<7> [181.986058] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [181.987151] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-5] generating connector hotplug event
<7> [181.987195] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-6] adding connector to sysfs
<7> [181.987764] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-6] generating connector hotplug event
<7> [181.987855] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-7] adding connector to sysfs
<7> [181.988649] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-7] generating connector hotplug event
<7> [181.988687] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-6] adding connector to sysfs
<7> [181.989068] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [181.990052] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-6] generating connector hotplug event
<7> [181.990099] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-8] adding connector to sysfs
<7> [181.990419] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-8] generating connector hotplug event
<6> [181.990448] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [181.990537] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [181.990675] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [181.991570] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [181.991949] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [181.992062] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [181.992159] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [181.992250] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [181.992357] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [181.992558] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [181.995812] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [181.995940] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [182.000085] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [182.000198] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [182.004418] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [182.004532] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [182.008689] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [182.008797] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [182.012999] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [182.013097] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [182.017237] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [182.017353] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [182.021567] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [182.021866] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [182.021964] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4]
<7> [182.021970] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [182.026212] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected
<7> [182.026223] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5]
<7> [182.026229] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [182.030849] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected
<7> [182.030860] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5]
<7> [182.030865] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [182.035064] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected
<7> [182.035070] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6]
<7> [182.035074] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [182.039231] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected
<7> [182.039236] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7]
<7> [182.039239] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<7> [182.043377] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected
<7> [182.043382] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6]
<7> [182.043385] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [182.047554] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected
<7> [182.047559] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8]
<7> [182.047562] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [182.051744] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected
<7> [182.051750] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [182.051756] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no
<7> [182.051760] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no
<7> [182.051764] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no
<7> [182.051768] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no
<7> [182.051772] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no
<7> [182.051776] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no
<7> [182.051780] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no
<7> [182.051813] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [182.051823] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [182.051865] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [182.051872] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [182.052807] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [182.052933] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [182.053049] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [182.053153] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [182.053251] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [182.053356] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [182.053450] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [182.053542] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [182.053633] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [182.053725] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [182.053821] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [182.053914] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [182.054006] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [182.054099] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [182.054195] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [182.054287] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [182.054395] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [182.054490] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [182.054580] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [182.054670] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [182.054761] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [182.054857] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [182.055088] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [182.055333] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4]
<7> [182.055340] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-4]
<7> [182.059516] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-4] disconnected
<7> [182.059522] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5]
<7> [182.059525] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-5]
<7> [182.063662] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-5] disconnected
<7> [182.063666] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5]
<7> [182.063670] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-5]
<7> [182.067848] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-5] disconnected
<7> [182.067851] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6]
<7> [182.067855] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-6]
<7> [182.071316] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [182.072047] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-6] disconnected
<7> [182.072051] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7]
<7> [182.072055] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-7]
<6> [182.074669] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [182.075146] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [182.075353] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [182.075396] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [182.075702] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [182.075849] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [182.076174] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-7] disconnected
<7> [182.076178] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6]
<7> [182.076182] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-6]
<7> [182.078078] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [182.079668] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [182.081344] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [182.081545] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [182.081705] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [182.083444] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [182.083588] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [182.083751] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [182.083867] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [182.084082] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-6] disconnected
<7> [182.084088] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8]
<7> [182.084092] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-8]
<7> [182.085881] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [182.088284] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-8] disconnected
<7> [182.088294] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [182.088309] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-4] enabled? no
<7> [182.088314] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-5] enabled? no
<7> [182.088318] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-5] enabled? no
<7> [182.088322] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-6] enabled? no
<7> [182.088326] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-7] enabled? no
<7> [182.088330] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-6] enabled? no
<7> [182.088335] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-8] enabled? no
<7> [182.088454] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [182.088471] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [182.088528] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [182.088539] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [182.088572] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [182.088524] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [182.088581] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [182.088734] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [182.088905] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [182.089356] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [182.089844] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [182.090130] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [182.095029] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [182.104066] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [182.104136] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [182.104336] [IGT] xe_module_load: exiting, ret=0
|