igt@kms_plane_scaling@plane-scaler-with-clipping-clamping-modifiers@pipe-b on shard-lnl@xe-4294-92cfd765fcc4d84dbc90a99e775aed679f33efce Test details

Detail	Value
Duration	1.73 seconds
Hostname	shard-lnl-8
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4294-92cfd765fcc4d84db+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (1.728s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (1.728s)
Dmesg	<6> [330.070560] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [330.075534] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430] <7> [330.077396] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [330.077769] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [330.078035] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [330.078305] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [330.078556] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B] <7> [330.078833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [330.079069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [330.079290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [330.079499] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [330.079716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [330.079911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [330.080097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [330.080274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [330.080446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [330.080608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [330.080874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [330.081059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [330.081210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [330.081355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [330.081496] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [330.081635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [330.081800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [330.081932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [330.082080] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [330.082218] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [330.082343] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [330.082463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [330.082581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [330.082716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [330.082832] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [330.082945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [330.083054] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [330.083175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [330.083298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [330.083411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [330.083514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [330.083613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [330.083731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [330.083834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [330.083938] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [330.084039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [330.084137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [330.084233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [330.084328] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [330.084422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [330.084511] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [330.084601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [330.084712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [330.084711] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [330.084807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [330.084865] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [330.084900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [330.084992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [330.084990] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [330.085077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [330.085157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [330.085235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [330.085312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [330.085388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [330.085463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [330.085538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [330.085611] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [330.085697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [330.085788] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [330.085876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [330.085964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [330.086036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [330.086103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [330.086173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [330.086243] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [330.086313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [330.086383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [330.086453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [330.086522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [330.086591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [330.086666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [330.086755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [330.086845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [330.086933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [330.087022] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [330.087099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [330.087175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dpll_hw_state <7> [330.087250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [330.087317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [330.087385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [330.087452] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [330.087519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [330.087586] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [330.087653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [330.087886] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [330.087992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [330.088087] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [330.088163] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [330.088233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [330.088301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [330.088369] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [330.088437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [330.088505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [330.088572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [330.088639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [330.088738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [330.088833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [330.088920] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [330.089002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [330.089072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [330.089140] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [330.089206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [330.089273] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [330.089339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [330.089406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [330.089473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [330.089539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [330.089606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [330.089690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [330.089786] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [330.089888] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [330.089986] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40 <7> [330.090129] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [330.090186] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [330.090242] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [330.090296] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [330.090348] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [330.090399] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [330.090449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [330.090500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [330.090550] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [330.090615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [330.090728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [330.090833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [330.090935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [330.091027] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [330.091105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [330.091194] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [330.091277] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz <7> [330.091392] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0 <7> [330.091475] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0 <7> [330.091549] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152 <7> [330.091605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [330.091695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [330.091807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [330.091908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [330.091999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [330.092075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [330.092148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [330.092221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [330.092294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [330.092367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [330.092439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [330.092511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [330.092586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [330.092668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [330.092766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [330.092863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [330.092957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [330.093033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [330.093104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [330.093174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [330.093243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [330.093314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [330.093384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [330.093453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [330.093522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [330.093595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [330.093679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [330.093777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [330.093867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [330.093956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [330.094031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [330.094100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [330.094169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [330.094239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [330.094307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [330.094375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [330.094447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [330.094523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [330.094596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0 <7> [330.094671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [330.094760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [330.094848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [330.094936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [330.095017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [330.095089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [330.095160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [330.095229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [330.095299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [330.095368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [330.095437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [330.095506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [330.095575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [330.095643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [330.095739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [330.095837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [330.095931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [330.096013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [330.096085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [330.096152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [330.096219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [330.096285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [330.096351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [330.096418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [330.096485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [330.096551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:430] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [330.096619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [330.096700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2783.000000x1705.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [330.096800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [330.096899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [330.096991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [330.097063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [330.097129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [330.099888] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [330.100011] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [330.100159] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [330.100287] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [330.100519] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [330.100603] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [330.306977] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [330.307514] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [330.318218] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [330.318493] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [330.318794] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [330.318656] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [330.319165] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [330.371392] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [330.371834] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [330.379821] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [330.380176] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [330.380257] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [330.380818] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [330.381400] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [330.381775] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [330.382128] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [330.382355] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [330.382566] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [330.382797] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [330.382996] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [330.383235] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [330.383439] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [330.383698] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [330.383910] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [330.384157] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [330.384365] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [330.384604] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [330.384858] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [330.385116] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1] <7> [330.385335] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2] <7> [330.385553] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3] <7> [330.385869] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [330.386139] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [330.387662] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B] <7> [330.387964] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [330.389991] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [330.390218] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7> [330.406433] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [330.406851] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [330.407157] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [330.407458] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [330.555792] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [330.555781] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [330.555801] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [330.883528] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [330.973002] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [330.973376] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [330.973727] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [331.010196] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [331.010672] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [331.011050] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [331.011419] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [331.180693] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [331.181168] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [331.181536] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [331.183767] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [331.185067] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [331.185841] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [331.188267] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [331.190127] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [331.191774] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [331.192326] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [331.194008] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [331.194535] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [331.195694] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [331.196459] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [331.197034] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [331.197674] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [331.213340] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [331.214272] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [331.214931] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.216908] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [331.217426] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [331.221822] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [331.222372] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:430] from all active usage due to RMFB ioctl <7> [331.222537] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:430] is removed <7> [331.222710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.223131] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.223434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.223748] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.224026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.224285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.224618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.225077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.225470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.225835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.226182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.226494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.227539] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.255751] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [331.255935] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [331.256051] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [331.256115] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.256293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40 <7> [331.256434] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.256516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.256591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.256678] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.256748] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.256844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.256966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.257079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.257190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.257299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.257405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.257556] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152 <7> [331.258185] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [331.258314] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [331.263159] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.264388] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.264434] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed <7> [331.264470] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.264615] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.264733] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.264803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.264881] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.264964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.265064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.265204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.265341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.265476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.265610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.265757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.266146] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.300506] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [331.300671] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [331.300777] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [331.301042] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.301183] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40 <7> [331.301314] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.301397] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.301469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [331.301540] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 <7> [331.301608] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 <7> [331.301715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.301836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.301950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.302062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.302171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.302281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.302428] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152 <7> [331.303011] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [331.303127] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [331.313157] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.314504] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.314551] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed <7> [331.314597] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.314752] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.314839] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.314971] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.315101] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.315231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.315386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.315608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.315825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.315939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.316051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.316159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.316501] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.335233] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.335512] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x80 <7> [331.335819] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.336002] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.336163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.336316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.336464] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.336653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.336903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.337134] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.337359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.337572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.337798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.338065] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182 <7> [331.346507] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.348332] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.348449] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed <7> [331.348529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.348833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.348954] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.349063] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.349170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.349276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.349404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.349580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.349769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.349935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.350094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.350245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.350712] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.371554] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.371877] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x80 <7> [331.372214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.372453] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.372703] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.372923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.373134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.373388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.373746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.374074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.374384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.374700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.374993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.375358] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182 <7> [331.379812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.381506] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.381616] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed <7> [331.381731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.381967] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.382120] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.382267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.382413] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.382559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.382760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.383004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.383227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.383439] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.383664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.383875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.384424] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.410595] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.410929] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x80 <7> [331.411207] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.411340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.411462] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [331.411576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 <7> [331.411728] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 <7> [331.411875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.412061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.412237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.412407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.412569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.412745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.412972] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182 <7> [331.413661] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [331.413857] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [331.413997] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [331.414143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [331.414282] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [331.429826] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.431784] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.431889] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed <7> [331.431977] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.432366] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.432715] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.432922] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.433116] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.433309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.433526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.433841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.434143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.434414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.434701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.434961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.435629] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.454430] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.454948] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100 <7> [331.455360] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.455690] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.455964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.456231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.456491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.456809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.457210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.457598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.457996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.458377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.458784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.459264] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212 <7> [331.463151] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.464795] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.464884] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed <7> [331.464947] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.465227] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.465448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.465687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.465847] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.465964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.466105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.466297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.466479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.466671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.466851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.467020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.467498] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.507556] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [331.507734] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [331.507844] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [331.507934] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.508063] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100 <7> [331.508187] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.508263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.508333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.508402] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.508469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.508554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.508727] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100 <7> [331.508807] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.508874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.508940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.509006] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.509071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.509141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.509252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.509361] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.509469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.509576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.509692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.509838] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212 <7> [331.510425] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [331.510538] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [331.513115] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.514225] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.514256] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed <7> [331.514275] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.514362] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.514429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.514495] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.514561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.514628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.514763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.514882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.514993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.515100] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.515207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.515315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.515677] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.533193] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.533331] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100 <7> [331.533532] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.533727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.533861] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [331.533993] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 <7> [331.534120] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 <7> [331.534267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.534453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.534647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.534833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.535033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.535222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.535459] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212 <7> [331.546500] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.548361] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.548447] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed <7> [331.548501] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.548947] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.549214] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.549444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.549697] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.549921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.550151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.550458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.550784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.551060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.551327] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.551642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.552292] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.567038] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.567275] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x200 <7> [331.567561] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.567899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.568118] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.568330] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.568543] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.568806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.569104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.569392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.569677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.569937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.570197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.570516] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242 <7> [331.579786] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.581427] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.581500] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed <7> [331.581547] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.581852] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.582059] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.582254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.582443] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.582674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.582881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.583165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.583438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.583699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.583976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.584209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.584800] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.611129] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.611592] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x200 <7> [331.612089] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.612331] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.612530] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.612735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.612923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.613142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.613435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.613676] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [331.613736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.613997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.614020] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [331.614247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.614303] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [331.614485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.614832] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242 <7> [331.616034] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [331.616248] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [331.629792] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.631859] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.631993] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed <7> [331.632091] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.632438] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.632754] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.633004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.633236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.633466] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.633775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.634149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.634501] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.634855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.635171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.635486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.636332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.654687] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.654989] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x200 <7> [331.655369] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.655624] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.655893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [331.656118] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 <7> [331.656333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 <7> [331.656600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.657005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.657366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.657731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.658058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.658369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.658796] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242 <7> [331.663112] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.664712] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.664788] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed <7> [331.664863] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.665130] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.665335] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.665531] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.665768] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.665923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.666087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.666316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.666532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.666756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.666960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.667154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.667713] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.686305] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.686622] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x400 <7> [331.686998] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.687227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.687432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.687650] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.687852] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.688084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.688421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.688760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.689082] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.689400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.689712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.690097] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252 <7> [331.696437] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.698158] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.698250] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed <7> [331.698315] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.698559] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.698769] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.698912] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.699042] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.699169] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.699315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.699526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.699734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.699928] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.700109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.700288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.700818] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.731204] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [331.731370] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [331.731498] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [331.731701] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.731816] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x400 <7> [331.731951] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.732042] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.732127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [331.732208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 <7> [331.732291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 <7> [331.732391] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.732515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.732639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.732747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.732855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.732961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.733083] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252 <7> [331.733546] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [331.733655] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [331.746468] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.748219] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.748315] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed <7> [331.748382] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.748745] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.748921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.749073] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.749219] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.749363] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.749525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.749775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.749981] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.750175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.750362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.750545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.751014] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [331.766914] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [331.767060] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x400 <7> [331.767258] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [331.767413] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [331.767560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [331.767787] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 <7> [331.767950] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 <7> [331.768126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [331.768332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [331.768525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [331.768741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.768923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [331.769127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [331.769355] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252 <7> [331.779794] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [331.781477] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [331.781554] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed <7> [331.781603] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [331.781956] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [331.782196] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [331.782425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.782667] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.782895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [331.783148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [331.783434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [331.783722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [331.783976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.784224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [331.784518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [331.785106] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [331.799679] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [330.070560] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [330.075534] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]

<7> [330.077396] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [330.077769] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [330.078035] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [330.078305] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [330.078556] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]

<7> [330.078833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [330.079069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [330.079290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [330.079499] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [330.079716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [330.079911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [330.080097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [330.080274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [330.080446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [330.080608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [330.080874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [330.081059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [330.081210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [330.081355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [330.081496] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [330.081635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [330.081800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [330.081932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [330.082080] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [330.082218] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [330.082343] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [330.082463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [330.082581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [330.082716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [330.082832] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [330.082945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [330.083054] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [330.083175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [330.083298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [330.083411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [330.083514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [330.083613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [330.083731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [330.083834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [330.083938] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [330.084039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [330.084137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [330.084233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [330.084328] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [330.084422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [330.084511] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [330.084601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [330.084712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [330.084711] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [330.084807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [330.084865] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [330.084900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [330.084992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [330.084990] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [330.085077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [330.085157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [330.085235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [330.085312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [330.085388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [330.085463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [330.085538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [330.085611] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [330.085697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [330.085788] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [330.085876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [330.085964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [330.086036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [330.086103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [330.086173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [330.086243] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [330.086313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [330.086383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [330.086453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [330.086522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [330.086591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [330.086666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [330.086755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [330.086845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [330.086933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [330.087022] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [330.087099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [330.087175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dpll_hw_state

<7> [330.087250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [330.087317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [330.087385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [330.087452] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [330.087519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [330.087586] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [330.087653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [330.087886] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [330.087992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [330.088087] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [330.088163] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [330.088233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [330.088301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [330.088369] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [330.088437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [330.088505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [330.088572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [330.088639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [330.088738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [330.088833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [330.088920] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [330.089002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [330.089072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [330.089140] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [330.089206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [330.089273] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [330.089339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [330.089406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [330.089473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [330.089539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [330.089606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [330.089690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [330.089786] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [330.089888] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [330.089986] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40

<7> [330.090129] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [330.090186] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [330.090242] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [330.090296] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [330.090348] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [330.090399] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [330.090449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [330.090500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [330.090550] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [330.090615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [330.090728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [330.090833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [330.090935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [330.091027] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [330.091105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [330.091194] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [330.091277] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz

<7> [330.091392] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0

<7> [330.091475] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0

<7> [330.091549] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152

<7> [330.091605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [330.091695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [330.091807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [330.091908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [330.091999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [330.092075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [330.092148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [330.092221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [330.092294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [330.092367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [330.092439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [330.092511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [330.092586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [330.092668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [330.092766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [330.092863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [330.092957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [330.093033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [330.093104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [330.093174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [330.093243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [330.093314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [330.093384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [330.093453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [330.093522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [330.093595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [330.093679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [330.093777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [330.093867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [330.093956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [330.094031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [330.094100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [330.094169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [330.094239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [330.094307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [330.094375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [330.094447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [330.094523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [330.094596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0

<7> [330.094671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [330.094760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [330.094848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [330.094936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [330.095017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [330.095089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [330.095160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [330.095229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [330.095299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [330.095368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [330.095437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [330.095506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [330.095575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [330.095643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [330.095739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [330.095837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [330.095931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [330.096013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [330.096085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [330.096152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [330.096219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [330.096285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [330.096351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [330.096418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [330.096485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [330.096551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:430] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [330.096619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [330.096700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2783.000000x1705.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [330.096800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [330.096899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [330.096991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [330.097063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [330.097129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [330.099888] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [330.100011] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [330.100159] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [330.100287] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [330.100519] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [330.100603] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [330.306977] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [330.307514] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [330.318218] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [330.318493] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [330.318794] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [330.318656] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [330.319165] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [330.371392] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [330.371834] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [330.379821] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [330.380176] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [330.380257] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [330.380818] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [330.381400] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [330.381775] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [330.382128] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [330.382355] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [330.382566] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [330.382797] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [330.382996] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [330.383235] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [330.383439] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [330.383698] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [330.383910] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [330.384157] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [330.384365] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [330.384604] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [330.384858] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [330.385116] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1]

<7> [330.385335] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2]

<7> [330.385553] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3]

<7> [330.385869] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [330.386139] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [330.387662] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B]

<7> [330.387964] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [330.389991] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [330.390218] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining)

<7> [330.406433] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [330.406851] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [330.407157] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [330.407458] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [330.555792] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [330.555781] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [330.555801] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [330.883528] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [330.973002] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [330.973376] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [330.973727] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [331.010196] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [331.010672] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [331.011050] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [331.011419] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [331.180693] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [331.181168] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [331.181536] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [331.183767] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [331.185067] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [331.185841] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [331.188267] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [331.190127] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [331.191774] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [331.192326] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [331.194008] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [331.194535] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [331.195694] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [331.196459] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [331.197034] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [331.197674] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [331.213340] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [331.214272] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [331.214931] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.216908] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [331.217426] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [331.221822] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [331.222372] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:430] from all active usage due to RMFB ioctl

<7> [331.222537] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:430] is removed

<7> [331.222710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.223131] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.223434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.223748] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.224026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.224285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.224618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.225077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.225470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.225835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.226182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.226494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.227539] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.255751] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [331.255935] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [331.256051] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [331.256115] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.256293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40

<7> [331.256434] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.256516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.256591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.256678] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.256748] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.256844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.256966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.257079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.257190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.257299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.257405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.257556] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152

<7> [331.258185] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [331.258314] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [331.263159] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.264388] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.264434] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed

<7> [331.264470] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.264615] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.264733] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.264803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.264881] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.264964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.265064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.265204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.265341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.265476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.265610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.265757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.266146] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.300506] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [331.300671] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [331.300777] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [331.301042] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.301183] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40

<7> [331.301314] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.301397] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.301469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [331.301540] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191

<7> [331.301608] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192

<7> [331.301715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.301836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.301950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.302062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.302171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.302281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.302428] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152

<7> [331.303011] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [331.303127] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [331.313157] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.314504] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.314551] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed

<7> [331.314597] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.314752] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.314839] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.314971] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.315101] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.315231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.315386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.315608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.315825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.315939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.316051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.316159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.316501] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.335233] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.335512] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x80

<7> [331.335819] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.336002] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.336163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.336316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.336464] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.336653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.336903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.337134] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.337359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.337572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.337798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.338065] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182

<7> [331.346507] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.348332] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.348449] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed

<7> [331.348529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.348833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.348954] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.349063] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.349170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.349276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.349404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.349580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.349769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.349935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.350094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.350245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.350712] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.371554] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.371877] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x80

<7> [331.372214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.372453] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.372703] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.372923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.373134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.373388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.373746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.374074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.374384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.374700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.374993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.375358] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182

<7> [331.379812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.381506] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.381616] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed

<7> [331.381731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.381967] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.382120] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.382267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.382413] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.382559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.382760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.383004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.383227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.383439] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.383664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.383875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.384424] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.410595] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.410929] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x80

<7> [331.411207] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.411340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.411462] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [331.411576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191

<7> [331.411728] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192

<7> [331.411875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.412061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.412237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.412407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.412569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.412745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.412972] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182

<7> [331.413661] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [331.413857] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [331.413997] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [331.414143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [331.414282] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [331.429826] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.431784] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.431889] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed

<7> [331.431977] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.432366] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.432715] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.432922] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.433116] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.433309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.433526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.433841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.434143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.434414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.434701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.434961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.435629] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.454430] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.454948] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100

<7> [331.455360] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.455690] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.455964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.456231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.456491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.456809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.457210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.457598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.457996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.458377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.458784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.459264] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212

<7> [331.463151] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.464795] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.464884] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed

<7> [331.464947] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.465227] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.465448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.465687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.465847] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.465964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.466105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.466297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.466479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.466671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.466851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.467020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.467498] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.507556] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [331.507734] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [331.507844] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [331.507934] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.508063] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100

<7> [331.508187] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.508263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.508333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.508402] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.508469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.508554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.508727] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100

<7> [331.508807] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.508874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.508940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.509006] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.509071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.509141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.509252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.509361] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.509469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.509576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.509692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.509838] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212

<7> [331.510425] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [331.510538] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [331.513115] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.514225] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.514256] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed

<7> [331.514275] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.514362] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.514429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.514495] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.514561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.514628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.514763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.514882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.514993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.515100] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.515207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.515315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.515677] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.533193] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.533331] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x100

<7> [331.533532] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.533727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.533861] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [331.533993] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191

<7> [331.534120] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192

<7> [331.534267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.534453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.534647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.534833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.535033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.535222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.535459] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212

<7> [331.546500] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.548361] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.548447] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed

<7> [331.548501] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.548947] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.549214] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.549444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.549697] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.549921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.550151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.550458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.550784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.551060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.551327] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.551642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.552292] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.567038] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.567275] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x200

<7> [331.567561] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.567899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.568118] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.568330] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.568543] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.568806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.569104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.569392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.569677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.569937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.570197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.570516] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242

<7> [331.579786] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.581427] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.581500] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed

<7> [331.581547] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.581852] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.582059] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.582254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.582443] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.582674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.582881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.583165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.583438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.583699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.583976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.584209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.584800] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.611129] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.611592] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x200

<7> [331.612089] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.612331] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.612530] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.612735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.612923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.613142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.613435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.613676] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [331.613736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.613997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.614020] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [331.614247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.614303] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [331.614485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.614832] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242

<7> [331.616034] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [331.616248] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [331.629792] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.631859] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.631993] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed

<7> [331.632091] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.632438] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.632754] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.633004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.633236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.633466] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.633775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.634149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.634501] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.634855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.635171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.635486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.636332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.654687] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.654989] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x200

<7> [331.655369] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.655624] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.655893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [331.656118] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191

<7> [331.656333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192

<7> [331.656600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.657005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.657366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.657731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.658058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.658369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.658796] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242

<7> [331.663112] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.664712] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.664788] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed

<7> [331.664863] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.665130] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.665335] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.665531] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.665768] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.665923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.666087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.666316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.666532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.666756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.666960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.667154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.667713] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.686305] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.686622] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x400

<7> [331.686998] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.687227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.687432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.687650] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.687852] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.688084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.688421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.688760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.689082] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.689400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.689712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.690097] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252

<7> [331.696437] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.698158] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.698250] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed

<7> [331.698315] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.698559] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.698769] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.698912] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.699042] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.699169] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.699315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.699526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.699734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.699928] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.700109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.700288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.700818] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.731204] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [331.731370] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [331.731498] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [331.731701] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.731816] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x400

<7> [331.731951] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.732042] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.732127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [331.732208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84

<7> [331.732291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85

<7> [331.732391] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.732515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.732639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.732747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.732855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.732961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.733083] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252

<7> [331.733546] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [331.733655] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [331.746468] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.748219] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.748315] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed

<7> [331.748382] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.748745] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.748921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.749073] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.749219] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.749363] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.749525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.749775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.749981] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.750175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.750362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.750545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.751014] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [331.766914] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [331.767060] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x400

<7> [331.767258] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [331.767413] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [331.767560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [331.767787] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191

<7> [331.767950] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192

<7> [331.768126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [331.768332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [331.768525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [331.768741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.768923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [331.769127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [331.769355] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252

<7> [331.779794] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [331.781477] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [331.781554] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed

<7> [331.781603] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [331.781956] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [331.782196] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [331.782425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.782667] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 89, 287, 287, 287, 287, 287, 0, 0, 191, 89, 191 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.782895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 177, 441, 441, 441, 441, 441, 0, 0, 192, 177, 192 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [331.783148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [331.783434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [331.783722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [331.783976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.784224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [331.784518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [331.785106] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [331.799679] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-scaler-with-clipping-clamping-modifiers@pipe-b