igt@kms_plane_scaling@plane-upscale-factor-0-25-with-modifiers@pipe-b on shard-lnl@xe-4294-92cfd765fcc4d84dbc90a99e775aed679f33efce Test details

Detail	Value
Duration	1.61 seconds
Hostname	shard-lnl-1
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4294-92cfd765fcc4d84db+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (1.606s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (1.606s)
Dmesg	<6> [199.731086] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [199.733889] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430] <7> [199.735032] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [199.735236] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [199.735395] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [199.735627] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [199.735776] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B] <7> [199.735918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [199.736065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [199.736195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [199.736320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [199.736451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [199.736568] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [199.736683] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [199.736793] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [199.736902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [199.737007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [199.737111] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [199.737212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [199.737310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [199.737412] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [199.737508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [199.737599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [199.737689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [199.737778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [199.737866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [199.737954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [199.738041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [199.738124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [199.738206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [199.738286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [199.738365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [199.738488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [199.738576] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [199.738657] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [199.738736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [199.738813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [199.738889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [199.738964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [199.739037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [199.739110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [199.739181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [199.739251] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [199.739321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [199.739390] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [199.739632] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [199.739710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [199.739778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [199.739846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [199.739914] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [199.739982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [199.740051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [199.740119] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [199.740186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [199.740254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [199.740321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [199.740388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [199.740469] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [199.740543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [199.740616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [199.740690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [199.740760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [199.740830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [199.740900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [199.740970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [199.741040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [199.741110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [199.741179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [199.741247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [199.741315] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [199.741383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [199.741462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [199.741531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [199.741598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [199.741665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [199.741731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [199.741797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [199.741868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [199.741942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [199.742016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [199.742085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [199.742150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [199.742216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [199.742282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [199.742347] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [199.742420] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [199.742503] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 720x450->2880x1800 scaler_users = 0x40 <7> [199.742582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [199.742639] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [199.742696] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [199.742751] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [199.742804] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [199.742855] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [199.742906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [199.742956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [199.743010] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [199.743081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [199.743164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [199.743244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [199.743322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [199.743401] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [199.743520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [199.743612] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [199.743698] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz <7> [199.743809] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0 <7> [199.743881] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0 <7> [199.743953] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152 <7> [199.744009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [199.744089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [199.744168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [199.744246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [199.744322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [199.744397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [199.744485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [199.744561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [199.744634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [199.744707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [199.744780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [199.744852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [199.744924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [199.745000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [199.745080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [199.745161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [199.745237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [199.745307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [199.745378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [199.745458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [199.745528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [199.745599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [199.745670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [199.745740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [199.745809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [199.745879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [199.745948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [199.746018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [199.746087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [199.746156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [199.746234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [199.746312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [199.746386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [199.746477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [199.746550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [199.746578] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [199.746628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [199.746706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [199.746709] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [199.746783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [199.746814] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [199.746855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0 <7> [199.746924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [199.746993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [199.747064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [199.747137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [199.747205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [199.747273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [199.747346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [199.747418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [199.747491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [199.747565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [199.747639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [199.747711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [199.747778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [199.747846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [199.747913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [199.747980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.748047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.748113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.748179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [199.748245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [199.748310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.748376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.748455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.748533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [199.748613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [199.748687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:430] 720x450 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [199.748757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [199.748824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 720.000000x450.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [199.748891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [199.748958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [199.749024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [199.749092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [199.749161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [199.749481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [199.749588] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [199.749756] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [199.749881] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [199.750086] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [199.750167] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [199.955691] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [199.956115] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [199.966950] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [199.967244] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [199.967416] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [199.967576] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [199.967920] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [200.019960] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [200.020336] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [200.028749] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [200.029143] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [200.029185] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [200.029631] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [200.030414] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [200.030850] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [200.031267] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [200.031568] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [200.031822] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [200.032050] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [200.032289] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [200.032534] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [200.032748] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [200.032957] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [200.033152] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [200.033343] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [200.033561] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [200.033750] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [200.033977] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [200.034175] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1] <7> [200.034395] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2] <7> [200.034633] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3] <7> [200.034900] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [200.035146] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [200.036422] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B] <7> [200.036668] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [200.038631] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [200.038845] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (491 ms remaining) <7> [200.057068] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [200.057383] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [200.057647] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [200.057940] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [200.203612] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [200.203732] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [200.203855] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [200.531650] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [200.562370] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [200.562739] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [200.563029] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [200.599480] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [200.599981] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [200.600353] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [200.600862] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [200.776065] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [200.776437] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [200.776702] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [200.778654] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [200.779897] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [200.780535] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [200.781528] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [200.782573] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [200.783510] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [200.783744] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [200.785029] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [200.785258] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [200.786034] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [200.786364] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [200.786613] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [200.786910] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [200.803236] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [200.803767] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [200.804090] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [200.805636] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [200.805946] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [200.809110] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [200.809413] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:430] from all active usage due to RMFB ioctl <7> [200.809494] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:430] is removed <7> [200.809550] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [200.809807] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [200.810044] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [200.810228] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.810426] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.810605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.810855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [200.811143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [200.811454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [200.811751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.812028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.812352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [200.813261] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [200.830933] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [200.831028] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 720x450->2880x1800 scaler_users = 0x40 <7> [200.831151] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.831235] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.831314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [200.831410] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [200.831487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [200.831577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.831713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [200.831850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [200.831973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.832090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.832207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [200.832355] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152 <7> [200.836440] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [200.837870] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [200.837951] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed <7> [200.837990] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [200.838240] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [200.838578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [200.838846] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.839104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.839241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.839400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [200.839604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [200.839816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [200.840022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.840253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.840476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [200.840940] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [200.854553] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [200.854761] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 720x450->2880x1800 scaler_users = 0x40 <7> [200.855126] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.855437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.855645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [200.855844] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 <7> [200.856045] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 <7> [200.856255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.856548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [200.856807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [200.857052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.857309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.857563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [200.857832] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152 <7> [200.869794] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [200.871376] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [200.871471] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed <7> [200.871519] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [200.871821] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [200.872105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [200.872301] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.872538] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.872712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.872951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [200.873218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [200.873530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [200.873768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.874028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.874255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [200.874830] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [200.887790] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [200.888023] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80 <7> [200.888308] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.888607] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.888825] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [200.889032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [200.889259] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [200.889517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.889804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [200.890062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [200.890315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.890582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.890816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [200.891145] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182 <7> [200.903104] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [200.904635] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [200.904704] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed <7> [200.904745] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [200.905025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [200.905254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [200.905446] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.905605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.905783] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.905960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [200.906187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [200.906416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [200.906619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.906819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.907014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [200.907475] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [200.931008] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [200.931271] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80 <7> [200.931676] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.931909] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.932124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [200.932318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [200.932575] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [200.932788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.933123] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80 <7> [200.933311] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.933494] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.933647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [200.933796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [200.933957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [200.934130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.934378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [200.934618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [200.934847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.935042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.935228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [200.935461] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182 <7> [200.936383] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [200.937642] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [200.937679] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed <7> [200.937700] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [200.937828] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [200.937929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [200.938026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.938122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.938324] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.938667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [200.939024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [200.939215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [200.939340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.939480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.939601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [200.939899] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [200.954073] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [200.954219] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80 <7> [200.954433] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.954585] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.954728] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [200.954869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 <7> [200.955004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 <7> [200.955155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.955352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [200.955568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [200.955752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.955932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.956121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [200.956327] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182 <7> [200.969740] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [200.971185] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [200.971261] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed <7> [200.971304] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [200.971578] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [200.971814] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [200.972000] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.972170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.972323] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [200.972534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [200.972827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [200.973069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [200.973301] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.973551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [200.973754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [200.974207] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [200.987673] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [200.987913] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 720x450->2880x1800 scaler_users = 0x100 <7> [200.988206] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [200.988508] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [200.988724] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [200.988929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [200.989157] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [200.989384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [200.989718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [200.989985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [200.990244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.990528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [200.990824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [200.991127] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212 <7> [201.003080] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.004664] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.004736] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed <7> [201.004774] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.005012] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.005206] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.005415] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.005600] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.005819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.006028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.006318] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.006608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.006862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.007112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.007380] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.008019] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.037650] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.037558] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [201.037796] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [201.037812] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 720x450->2880x1800 scaler_users = 0x100 <7> [201.037963] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.037952] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [201.038071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.038173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [201.038270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [201.038373] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [201.038549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.038691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.038815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.038933] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.039048] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.039158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.039288] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212 <7> [201.039781] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [201.039891] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [201.053096] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.054851] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.054924] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed <7> [201.054969] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.055266] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.055628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.055884] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.056112] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.056311] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.056552] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.056809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.057053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.057288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.057572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.057806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.058320] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.071286] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.071548] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 720x450->2880x1800 scaler_users = 0x100 <7> [201.071883] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.072126] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.072352] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [201.072654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 <7> [201.072868] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 <7> [201.073145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.073504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.073895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.074235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.074560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.074905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.075250] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212 <7> [201.086405] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.088927] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.089013] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed <7> [201.089071] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.089441] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.089718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.089949] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.090158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.090344] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.090595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.090844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.091085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.091312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.091553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.091759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.092280] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.104070] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.104250] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 720x450->2880x1800 scaler_users = 0x200 <7> [201.104510] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.104687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.104841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [201.104989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [201.105151] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [201.105328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.105557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.105747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.105931] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.106141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.106328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.106547] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242 <7> [201.119707] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.121232] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.121307] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed <7> [201.121352] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.121687] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.121897] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.122105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.122272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.122458] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.122625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.122853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.123076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.123285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.123523] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.123718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.124288] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.156677] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.156653] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [201.156799] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 720x450->2880x1800 scaler_users = 0x200 <7> [201.156823] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [201.156910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.156928] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [201.156983] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.157050] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [201.157119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [201.157190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [201.157285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.157422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.157536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.157633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.157718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.157799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.157903] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242 <7> [201.158312] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [201.158420] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [201.169695] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.171093] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.171146] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed <7> [201.171197] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.171548] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.171836] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.172083] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.172205] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.172315] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.172467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.172628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.172779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.172926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.173069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.173206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.173573] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.187870] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.188088] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 720x450->2880x1800 scaler_users = 0x200 <7> [201.188376] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.188674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.188887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [201.189076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 <7> [201.189300] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 <7> [201.189566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.189850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.190114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.190371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.190666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.190967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.191268] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242 <7> [201.203046] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.204517] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.204582] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed <7> [201.204619] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.204851] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.205054] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.205233] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.205425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.205596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.205828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.206093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.206330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.206597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.206814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.207069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.207576] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.220720] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.220976] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400 <7> [201.221226] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.221492] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.221692] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [201.221885] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [201.222113] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [201.222334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.222736] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400 <7> [201.222924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.223087] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.223269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [201.223454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [201.223602] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [201.223754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.223983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.224203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.224430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.224669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.224878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.225147] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252 <7> [201.236430] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.237774] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.237820] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed <7> [201.237846] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.238013] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.238167] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.238363] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.238632] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.238822] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.239049] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.239247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.239437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.239612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.239776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.239936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.240332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.272899] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.272899] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [201.272992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400 <7> [201.273036] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [201.273089] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.273130] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [201.273162] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.273226] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [201.273290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 <7> [201.273352] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 <7> [201.273443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.273553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.273643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.273728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.273811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.273891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.273993] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252 <7> [201.274403] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [201.274497] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [201.286434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.287790] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.287840] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed <7> [201.287873] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.288018] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.288122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.288304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.288604] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.288841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.289108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.289256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.289405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.289539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.289665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.289791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.290095] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [201.304618] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [201.304846] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400 <7> [201.305177] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [201.305472] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [201.305705] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [201.305929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 <7> [201.306210] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 <7> [201.306536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1 <7> [201.306872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [201.307197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [201.307600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.307887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [201.308173] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [201.308525] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252 <7> [201.319696] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [201.321321] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [201.321452] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed <7> [201.321500] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [201.321806] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [201.322048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [201.322240] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.322419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.322573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [201.322743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [201.322977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [201.323201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [201.323425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.323623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [201.323816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [201.324290] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [201.337844] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [199.731086] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [199.733889] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]

<7> [199.735032] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [199.735236] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [199.735395] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [199.735627] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [199.735776] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]

<7> [199.735918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [199.736065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [199.736195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [199.736320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [199.736451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [199.736568] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [199.736683] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [199.736793] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [199.736902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [199.737007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [199.737111] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [199.737212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [199.737310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [199.737412] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [199.737508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [199.737599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [199.737689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [199.737778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [199.737866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [199.737954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [199.738041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [199.738124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [199.738206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [199.738286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [199.738365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [199.738488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [199.738576] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [199.738657] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [199.738736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [199.738813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [199.738889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [199.738964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [199.739037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [199.739110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [199.739181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [199.739251] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [199.739321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [199.739390] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [199.739632] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [199.739710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [199.739778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [199.739846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [199.739914] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [199.739982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [199.740051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [199.740119] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [199.740186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [199.740254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [199.740321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [199.740388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [199.740469] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [199.740543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [199.740616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [199.740690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [199.740760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [199.740830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [199.740900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [199.740970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [199.741040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [199.741110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [199.741179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [199.741247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [199.741315] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [199.741383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [199.741462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [199.741531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [199.741598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [199.741665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [199.741731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [199.741797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [199.741868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [199.741942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [199.742016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [199.742085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [199.742150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [199.742216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [199.742282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [199.742347] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [199.742420] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [199.742503] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 720x450->2880x1800 scaler_users = 0x40

<7> [199.742582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [199.742639] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [199.742696] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [199.742751] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [199.742804] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [199.742855] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [199.742906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [199.742956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [199.743010] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [199.743081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [199.743164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [199.743244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [199.743322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [199.743401] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [199.743520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [199.743612] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [199.743698] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz

<7> [199.743809] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0

<7> [199.743881] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0

<7> [199.743953] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152

<7> [199.744009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [199.744089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [199.744168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [199.744246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [199.744322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [199.744397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [199.744485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [199.744561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [199.744634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [199.744707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [199.744780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [199.744852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [199.744924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [199.745000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [199.745080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [199.745161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [199.745237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [199.745307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [199.745378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [199.745458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [199.745528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [199.745599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [199.745670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [199.745740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [199.745809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [199.745879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [199.745948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [199.746018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [199.746087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [199.746156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [199.746234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [199.746312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [199.746386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [199.746477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [199.746550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [199.746578] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [199.746628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [199.746706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [199.746709] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [199.746783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [199.746814] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [199.746855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0

<7> [199.746924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [199.746993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [199.747064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [199.747137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [199.747205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [199.747273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [199.747346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [199.747418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [199.747491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [199.747565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [199.747639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [199.747711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [199.747778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [199.747846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [199.747913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [199.747980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.748047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.748113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.748179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [199.748245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [199.748310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.748376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.748455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.748533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [199.748613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [199.748687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:430] 720x450 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [199.748757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [199.748824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 720.000000x450.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [199.748891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [199.748958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [199.749024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [199.749092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [199.749161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [199.749481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [199.749588] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [199.749756] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [199.749881] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [199.750086] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [199.750167] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [199.955691] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [199.956115] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [199.966950] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [199.967244] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [199.967416] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [199.967576] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [199.967920] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [200.019960] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [200.020336] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [200.028749] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [200.029143] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [200.029185] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [200.029631] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [200.030414] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [200.030850] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [200.031267] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [200.031568] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [200.031822] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [200.032050] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [200.032289] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [200.032534] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [200.032748] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [200.032957] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [200.033152] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [200.033343] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [200.033561] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [200.033750] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [200.033977] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [200.034175] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1]

<7> [200.034395] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2]

<7> [200.034633] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3]

<7> [200.034900] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [200.035146] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [200.036422] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B]

<7> [200.036668] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [200.038631] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [200.038845] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (491 ms remaining)

<7> [200.057068] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [200.057383] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [200.057647] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [200.057940] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [200.203612] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [200.203732] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [200.203855] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [200.531650] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [200.562370] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [200.562739] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [200.563029] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [200.599480] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [200.599981] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [200.600353] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [200.600862] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [200.776065] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [200.776437] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [200.776702] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [200.778654] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [200.779897] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [200.780535] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [200.781528] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [200.782573] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [200.783510] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [200.783744] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [200.785029] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [200.785258] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [200.786034] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [200.786364] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [200.786613] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [200.786910] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [200.803236] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [200.803767] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [200.804090] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [200.805636] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [200.805946] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [200.809110] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [200.809413] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:430] from all active usage due to RMFB ioctl

<7> [200.809494] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:430] is removed

<7> [200.809550] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [200.809807] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [200.810044] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [200.810228] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.810426] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.810605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.810855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [200.811143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [200.811454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [200.811751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.812028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.812352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [200.813261] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [200.830933] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [200.831028] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 720x450->2880x1800 scaler_users = 0x40

<7> [200.831151] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.831235] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.831314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [200.831410] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [200.831487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [200.831577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.831713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [200.831850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [200.831973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.832090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.832207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [200.832355] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152

<7> [200.836440] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [200.837870] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [200.837951] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed

<7> [200.837990] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [200.838240] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [200.838578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [200.838846] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.839104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.839241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.839400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [200.839604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [200.839816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [200.840022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.840253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.840476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [200.840940] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [200.854553] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [200.854761] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 720x450->2880x1800 scaler_users = 0x40

<7> [200.855126] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.855437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.855645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [200.855844] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63

<7> [200.856045] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64

<7> [200.856255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.856548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [200.856807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [200.857052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.857309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.857563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [200.857832] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152

<7> [200.869794] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [200.871376] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [200.871471] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed

<7> [200.871519] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [200.871821] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [200.872105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [200.872301] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.872538] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.872712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.872951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [200.873218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [200.873530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [200.873768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.874028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.874255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [200.874830] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [200.887790] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [200.888023] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80

<7> [200.888308] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.888607] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.888825] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [200.889032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [200.889259] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [200.889517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.889804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [200.890062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [200.890315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.890582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.890816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [200.891145] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182

<7> [200.903104] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [200.904635] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [200.904704] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed

<7> [200.904745] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [200.905025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [200.905254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [200.905446] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.905605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.905783] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.905960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [200.906187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [200.906416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [200.906619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.906819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.907014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [200.907475] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [200.931008] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [200.931271] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80

<7> [200.931676] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.931909] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.932124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [200.932318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [200.932575] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [200.932788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.933123] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80

<7> [200.933311] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.933494] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.933647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [200.933796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [200.933957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [200.934130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.934378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [200.934618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [200.934847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.935042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.935228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [200.935461] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182

<7> [200.936383] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [200.937642] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [200.937679] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed

<7> [200.937700] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [200.937828] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [200.937929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [200.938026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.938122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.938324] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.938667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [200.939024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [200.939215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [200.939340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.939480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.939601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [200.939899] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [200.954073] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [200.954219] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 720x450->2880x1800 scaler_users = 0x80

<7> [200.954433] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.954585] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.954728] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [200.954869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63

<7> [200.955004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64

<7> [200.955155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.955352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [200.955568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [200.955752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.955932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.956121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [200.956327] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182

<7> [200.969740] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [200.971185] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [200.971261] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:431] is removed

<7> [200.971304] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [200.971578] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [200.971814] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [200.972000] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.972170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.972323] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [200.972534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [200.972827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [200.973069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [200.973301] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.973551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [200.973754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [200.974207] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [200.987673] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [200.987913] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 720x450->2880x1800 scaler_users = 0x100

<7> [200.988206] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [200.988508] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [200.988724] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [200.988929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [200.989157] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [200.989384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [200.989718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [200.989985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [200.990244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.990528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [200.990824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [200.991127] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212

<7> [201.003080] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.004664] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.004736] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed

<7> [201.004774] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.005012] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.005206] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.005415] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.005600] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.005819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.006028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.006318] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.006608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.006862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.007112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.007380] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.008019] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.037650] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.037558] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [201.037796] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [201.037812] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 720x450->2880x1800 scaler_users = 0x100

<7> [201.037963] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.037952] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [201.038071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.038173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [201.038270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [201.038373] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [201.038549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.038691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.038815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.038933] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.039048] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.039158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.039288] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212

<7> [201.039781] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [201.039891] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [201.053096] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.054851] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.054924] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed

<7> [201.054969] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.055266] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.055628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.055884] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.056112] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.056311] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.056552] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.056809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.057053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.057288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.057572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.057806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.058320] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.071286] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.071548] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 720x450->2880x1800 scaler_users = 0x100

<7> [201.071883] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.072126] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.072352] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [201.072654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63

<7> [201.072868] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64

<7> [201.073145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.073504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.073895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.074235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.074560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.074905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.075250] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212

<7> [201.086405] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.088927] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.089013] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:431] is removed

<7> [201.089071] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.089441] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.089718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.089949] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.090158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.090344] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.090595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.090844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.091085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.091312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.091553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.091759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.092280] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.104070] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.104250] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 720x450->2880x1800 scaler_users = 0x200

<7> [201.104510] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.104687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.104841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [201.104989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [201.105151] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [201.105328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.105557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.105747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.105931] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.106141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.106328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.106547] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242

<7> [201.119707] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.121232] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.121307] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed

<7> [201.121352] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.121687] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.121897] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.122105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.122272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.122458] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.122625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.122853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.123076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.123285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.123523] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.123718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.124288] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.156677] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.156653] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [201.156799] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 720x450->2880x1800 scaler_users = 0x200

<7> [201.156823] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [201.156910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.156928] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [201.156983] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.157050] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [201.157119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [201.157190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [201.157285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.157422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.157536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.157633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.157718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.157799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.157903] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242

<7> [201.158312] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [201.158420] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [201.169695] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.171093] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.171146] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed

<7> [201.171197] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.171548] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.171836] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.172083] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.172205] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.172315] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.172467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.172628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.172779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.172926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.173069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.173206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.173573] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.187870] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.188088] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 720x450->2880x1800 scaler_users = 0x200

<7> [201.188376] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.188674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.188887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [201.189076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63

<7> [201.189300] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64

<7> [201.189566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.189850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.190114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.190371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.190666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.190967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.191268] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242

<7> [201.203046] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.204517] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.204582] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed

<7> [201.204619] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.204851] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.205054] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.205233] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.205425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.205596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.205828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.206093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.206330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.206597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.206814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.207069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.207576] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.220720] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.220976] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400

<7> [201.221226] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.221492] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.221692] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [201.221885] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [201.222113] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [201.222334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.222736] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400

<7> [201.222924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.223087] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.223269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [201.223454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [201.223602] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [201.223754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.223983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.224203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.224430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.224669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.224878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.225147] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252

<7> [201.236430] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.237774] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.237820] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed

<7> [201.237846] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.238013] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.238167] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.238363] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.238632] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.238822] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.239049] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.239247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.239437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.239612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.239776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.239936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.240332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.272899] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.272899] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [201.272992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400

<7> [201.273036] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [201.273089] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.273130] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [201.273162] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.273226] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [201.273290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36

<7> [201.273352] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37

<7> [201.273443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.273553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.273643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.273728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.273811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.273891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.273993] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252

<7> [201.274403] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [201.274497] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [201.286434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.287790] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.287840] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed

<7> [201.287873] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.288018] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.288122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.288304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.288604] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.288841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.289108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.289256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.289405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.289539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.289665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.289791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.290095] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [201.304618] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [201.304846] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 720x450->2880x1800 scaler_users = 0x400

<7> [201.305177] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [201.305472] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [201.305705] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [201.305929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63

<7> [201.306210] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64

<7> [201.306536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1

<7> [201.306872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [201.307197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [201.307600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.307887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [201.308173] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [201.308525] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252

<7> [201.319696] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [201.321321] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [201.321452] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:431] is removed

<7> [201.321500] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [201.321806] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [201.322048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [201.322240] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.322419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.322573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [201.322743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [201.322977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [201.323201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [201.323425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.323623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [201.323816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [201.324290] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [201.337844] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-upscale-factor-0-25-with-modifiers@pipe-b