Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

Detail	Value
Duration	4.96 seconds
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4294-92cfd765fcc4d84db+ x86_64)
Out	Using IGT_SRANDOM=1766427829 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (4.961s)
Err	Starting subtest: load Subtest load: SUCCESS (4.961s)
Dmesg	<6> [155.646579] [IGT] xe_module_load: executing <4> [155.646716] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [155.657501] [IGT] xe_module_load: starting subtest load <5> [156.198913] Setting dangerous option force_probe - tainting kernel <6> [156.203631] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [156.205698] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode <6> [156.206326] xe 0000:00:02.0: [drm] Found pantherlake (device ID b083) integrated display version 30.00 stepping B0 <7> [156.206344] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] PANTHERLAKE b083:0004 dgfx:0 gfx:Xe3_LPG (30.00) media:Xe3_LPM (30.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [156.206546] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7> [156.206718] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [156.210192] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [156.210428] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [156.210639] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 1 (enabled) <7> [156.210865] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6fe5e018 <7> [156.211117] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [156.211314] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [156.211486] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [156.211644] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [156.211789] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [156.211969] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [156.212109] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [156.212303] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [156.212495] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [156.212706] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [156.212902] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [156.213114] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [156.213322] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [156.213557] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=7467 tRP=136 tRDPRE=88 tRAS=320 tRCD=136 tRC=456 <7> [156.213763] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [156.213982] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [156.214186] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=42130 peakbw: 102400 <7> [156.214407] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=45877 peakbw: 119472 <7> [156.214608] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [156.214800] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=47566 peakbw: 76800 <7> [156.215008] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=57825 peakbw: 102400 <7> [156.215194] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=64314 peakbw: 119472 <7> [156.215375] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [156.215547] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=56353 peakbw: 76800 <7> [156.215715] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [156.215893] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [156.216072] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [156.216231] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=62087 peakbw: 76800 <7> [156.216388] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [156.216539] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [156.216690] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [156.216850] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [156.217017] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [156.217166] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [156.217316] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [156.217464] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [156.217610] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [156.217754] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [156.217947] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [156.218623] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [156.218785] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT PANTHERLAKE ", BDB version 266 <7> [156.218986] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [156.219138] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 445, min size 5) <7> [156.219288] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [156.219457] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [156.219621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 862, min size 848) <7> [156.219778] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [156.219938] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [156.220127] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [156.220287] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [156.220432] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [156.220575] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [156.220717] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [156.220866] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [156.221027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [156.221161] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [156.221298] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 266 not known; assuming 44 <7> [156.221438] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [156.221592] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [156.221746] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [156.221890] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [156.222028] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [156.222163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [156.222292] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [156.222430] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [156.222572] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [156.222720] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [156.222854] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [156.223017] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [156.223257] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [156.223497] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [156.223724] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [156.223912] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [156.224205] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [156.224405] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [156.224583] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [156.224763] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [156.225003] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6> [156.225198] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7> [156.225221] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [156.225428] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [156.225612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [156.225820] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [156.226324] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [156.227062] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe3lpd_dmc.bin <7> [156.228353] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [156.228611] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [156.228814] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [156.229003] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 93 (93.0 usec) <7> [156.229171] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [156.229337] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 115 (115.0 usec) <7> [156.229494] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 115 (115.0 usec) <7> [156.229674] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 115 (115.0 usec) <7> [156.229844] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [156.230041] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 99 (99.0 usec) <7> [156.230193] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [156.230342] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 121 (121.0 usec) <7> [156.230490] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 121 (121.0 usec) <7> [156.230636] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 121 (121.0 usec) <7> [156.233831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [156.234077] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [156.234298] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [156.234513] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [156.234735] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f040 = 0xc003e200 (EVT_CTL) <7> [156.234948] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f010 = 0x4b444b18 (EVT_HTP) <7> [156.235141] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [156.235344] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f014 = 0x4d984cd4 (EVT_HTP) <7> [156.235531] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [156.235709] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [156.235919] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f03c = 0xc0032b00 (EVT_CTL) (disabling) <7> [156.236102] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f00c = 0x7e406c8 (EVT_HTP) <7> [156.236278] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [156.236443] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f014 = 0x19e019a0 (EVT_HTP) <7> [156.236617] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [156.236779] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [156.236958] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f43c = 0xc0032b00 (EVT_CTL) (disabling) <7> [156.237117] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f40c = 0x87e486c8 (EVT_HTP) <7> [156.237274] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [156.237430] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f414 = 0x99a89968 (EVT_HTP) <7> [156.237617] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [156.237771] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [156.237936] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032b00 (EVT_CTL) (disabling) <7> [156.238089] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x27e426c8 (EVT_HTP) <7> [156.238244] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [156.238395] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f814 = 0x39a83968 (EVT_HTP) <7> [156.238553] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [156.238704] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5b7c0 <7> [156.238854] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032b00 (EVT_CTL) (disabling) <7> [156.239026] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x97e496c8 (EVT_HTP) <7> [156.239176] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc44 = 0xc0033200 (EVT_CTL) (disabling) <7> [156.239325] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc14 = 0xa9a8a968 (EVT_HTP) <7> [156.240119] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <6> [156.244967] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe3lpd_dmc.bin (v2.32) <7> [156.249089] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 691200 kHz, VCO 1382400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [156.249329] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 691200 kHz <7> [156.249554] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1382400 kHz <7> [156.249798] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI A/PHY A] Using AUX CH A (VBT) <7> [156.250225] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:509:DDI A/PHY A] <7> [156.250531] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [156.250745] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [156.250963] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [156.251200] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [156.251405] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [156.251602] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [156.251797] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [156.252002] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [156.252231] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [156.252457] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:509:DDI A/PHY A] initial power sequencer: PPS 0 <7> [156.252690] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [156.252895] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [156.253083] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [156.253292] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [156.253466] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [156.253670] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [156.253838] xe 0000:00:02.0: [drm:pps_vdd_init [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 VDD left on by BIOS, adjusting state tracking <7> [156.254061] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [156.319883] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.379883] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.439884] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.499883] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.559882] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.619883] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.679882] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.739882] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.799881] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.859881] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.919881] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [156.979882] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.039880] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.099880] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.159880] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.219880] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.279880] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.339879] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.399880] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.459879] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.519879] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.579879] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.639878] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.699878] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.759878] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.819878] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.879878] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.939877] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [157.999877] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.059877] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.119877] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.179876] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.179998] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <7> [158.239876] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.299877] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.359876] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.419875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.479875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.539875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.599876] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.659875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.719875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.779875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.839875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.899878] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [158.959876] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.019874] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.079875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.139874] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.199873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.259873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.319874] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.379873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.439873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.499873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.559873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.619873] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.679872] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.739872] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.799872] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.859872] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.919871] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [159.979871] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [160.039871] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [160.099871] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [160.099982] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [160.099998] xe 0000:00:02.0: [drm] [ENCODER:509:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [160.100010] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 turning VDD off <7> [160.100176] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:509:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [160.100296] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [160.100674] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:509:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [160.100857] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [160.101032] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:509:DDI TC1/PHY TC1] <7> [160.101499] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:523:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [160.101645] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [160.101792] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:523:DDI TC2/PHY TC2] <7> [160.102081] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:532:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [160.102222] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [160.102372] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:532:DDI TC3/PHY TC3] <7> [160.102651] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [160.102801] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7> [160.103172] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [160.103294] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY TC4] <7> [160.103411] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY TC4] Using DDC pin 0xc (VBT) <7> [160.103919] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [160.104076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [160.104223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [160.104370] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] hw state readout: disabled <7> [160.104479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [160.104586] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [160.104689] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [160.104795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [160.104901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [160.104995] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [160.105088] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [160.105181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [160.105272] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [160.105363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [160.105452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [160.105552] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [160.105651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [160.105741] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [160.105832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [160.105931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [160.106021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [160.106108] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [160.106200] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] hw state readout: disabled, pipe D <7> [160.106295] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] hw state readout: disabled, pipe D <7> [160.106382] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] hw state readout: disabled, pipe D <7> [160.106470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] hw state readout: disabled, pipe D <7> [160.106556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] hw state readout: disabled, pipe D <7> [160.106643] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] hw state readout: disabled, pipe D <7> [160.106735] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.106840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [160.106952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST A] hw state readout: disabled, pipe A <7> [160.107054] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST B] hw state readout: disabled, pipe B <7> [160.107157] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:513:DP-MST C] hw state readout: disabled, pipe C <7> [160.107255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:514:DP-MST D] hw state readout: disabled, pipe D <7> [160.107348] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.107466] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:523:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [160.107552] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DP-MST A] hw state readout: disabled, pipe A <7> [160.107636] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST B] hw state readout: disabled, pipe B <7> [160.107717] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST C] hw state readout: disabled, pipe C <7> [160.107799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST D] hw state readout: disabled, pipe D <7> [160.107888] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.107984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:532:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [160.108065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7> [160.108151] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7> [160.108242] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7> [160.108323] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7> [160.108584] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.108699] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [160.108805] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [160.108946] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.109075] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [160.109212] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.109334] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [160.109449] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [160.109561] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [160.109687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:510:DP-1] hw state readout: disabled <7> [160.109799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:524:DP-2] hw state readout: disabled <7> [160.109923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:DP-3] hw state readout: disabled <7> [160.110027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:HDMI-A-1] hw state readout: disabled <7> [160.110127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [160.110224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [160.110327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [160.110443] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [160.110551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [160.110657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [160.110764] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [160.110869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [160.110965] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [160.111060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [160.111150] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [160.111237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [160.111323] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [160.111406] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [160.111489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [160.111570] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [160.111662] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [160.111744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [160.111824] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [160.111914] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [160.111994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [160.112073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:390:plane 1D] min_cdclk 0 kHz <7> [160.112154] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:420:plane 2D] min_cdclk 0 kHz <7> [160.112235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:450:plane 3D] min_cdclk 0 kHz <7> [160.112318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:480:plane 4D] min_cdclk 0 kHz <7> [160.112399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:490:plane 5D] min_cdclk 0 kHz <7> [160.112496] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:500:cursor D] min_cdclk 0 kHz <7> [160.112586] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:506:pipe D] min_cdclk 0 kHz <7> [160.112684] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.112794] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.112913] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.113020] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:506:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.113119] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [160.113255] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [160.113389] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [160.113530] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [160.113714] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [160.113952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [160.114088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [160.114229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [160.114371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [setup_hw_state] <7> [160.114501] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [160.119090] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [160.121807] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [160.121949] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [160.122052] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [160.122147] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [160.122240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [160.122337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [160.122432] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [160.122520] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [160.122601] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [160.122681] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [160.122757] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [160.122831] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [160.122917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [160.122990] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [160.123064] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [160.123209] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [160.133990] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [160.134799] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [160.135071] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000efe <7> [160.135173] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000efe <7> [160.135266] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [160.135353] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [160.135434] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 0000000f,0000000f <6> [160.338910] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [160.338913] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [160.338915] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [160.339071] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [160.339213] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7> [160.339353] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7> [160.339481] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [160.339597] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [160.339709] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [160.339857] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [160.340028] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [160.340194] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [160.340292] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [160.340393] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [160.340490] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [160.341872] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [160.341984] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [160.342104] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [160.342213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [160.342318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [160.342433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [160.342535] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xc50c] = 0x00010002 <7> [160.342629] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [160.342730] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [160.342829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [160.342942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [160.343041] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [160.343141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [160.343238] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [160.343334] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [160.343429] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [160.343524] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [160.343617] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [160.343711] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [160.343803] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [160.343902] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [160.343995] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [160.344087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [160.344176] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [160.344273] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [160.344370] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [160.344476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [160.344568] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [160.344655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0x00800080 <7> [160.344752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7> [160.344848] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7> [160.344949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7> [160.345031] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7> [160.345112] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7> [160.345195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [160.345283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [160.345373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [160.345476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [160.345561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe5f4] = 0x10001000 <7> [160.345910] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [160.345996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [160.346089] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [160.346179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [160.346259] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0x00800080 <7> [160.346599] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [160.346689] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [160.346787] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [160.346869] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [160.346943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0x00800080 <7> [160.347264] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [160.347341] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [160.347421] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [160.347492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [160.347566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0x00800080 <7> [160.347639] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [160.347715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [160.347796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [160.348378] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [160.348534] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004593f7 <7> [160.348635] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [160.348728] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [160.348815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [160.348914] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000adc <7> [160.349007] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [160.349090] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [160.349166] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [160.349241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [160.349316] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [160.349390] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [160.349463] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [160.349535] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [160.349606] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [160.349703] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [160.349871] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [160.352731] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe1e000 for xe_guc_buf_cache_init_with_size [xe] <7> [160.355687] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 60 ext-regs. <7> [160.374973] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [160.386332] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [160.386779] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [160.387847] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4103 dwords <7> [160.388018] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [160.388122] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000 <7> [160.388215] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x731c] = 0x20002000 <7> [160.388309] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [160.390803] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [160.390950] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [160.391060] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [160.393741] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [160.393876] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <6> [160.397988] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/ptl_guc_70.bin version 70.55.3 <7> [160.401939] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [160.402126] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [160.402282] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [160.402416] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [160.402554] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [160.402670] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [160.402785] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [160.402912] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [160.403020] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [160.403130] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [160.403248] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [160.403360] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [160.403484] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [160.403614] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [160.405932] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/ptl_huc.bin version 10.3.3 <7> [160.407189] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [160.407487] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [160.429128] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [160.429799] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [160.430238] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [160.430573] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [160.430871] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [160.431115] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <6> [160.431355] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [160.431360] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [160.431363] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [160.431366] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [160.431369] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [160.431372] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [160.431374] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [160.431377] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [160.431381] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [160.431384] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [160.431389] xe 0000:00:02.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs <7> [160.432033] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [160.432432] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [160.432932] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [160.433294] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [160.433649] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [160.434036] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [160.434436] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [160.434802] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [160.435195] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [160.435552] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [160.436200] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [160.436515] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [160.436858] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [160.437219] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [160.437544] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [160.437854] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [160.438210] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [160.438529] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [160.438832] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [160.439172] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [160.441487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [160.441781] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [160.442071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [160.442294] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [160.442519] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [160.442761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [160.443019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [160.443222] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [160.443442] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [160.443667] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [160.443924] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [160.444162] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [160.444425] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [160.444657] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [160.444868] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [160.445070] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [160.445265] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [160.445450] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [160.445620] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [160.445789] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [160.445974] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [160.446142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [160.446304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [160.446480] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [160.446636] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [160.446781] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [160.446947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [160.447124] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [160.447305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [160.447456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [160.447606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [160.447752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [160.447902] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [160.448047] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [160.448188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [160.448323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [160.448457] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [160.449042] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [160.449196] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [160.449348] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [160.449489] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [160.449620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [160.449744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [160.449868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [160.449982] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [160.450097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [160.450210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [160.450322] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [160.451161] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [160.451361] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x016fe3f7 <7> [160.451502] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [160.451654] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [160.451793] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [160.451929] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003026 <7> [160.452050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [160.452164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [160.452273] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [160.452375] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [160.452473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [160.452568] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [160.452662] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [160.452755] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [160.452848] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [160.452991] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [160.453124] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [160.456731] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2161000 for xe_guc_buf_cache_init_with_size [xe] <7> [160.475629] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056) <7> [160.496784] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [160.497314] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [160.498947] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [160.499170] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [160.502711] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [160.502991] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [160.526005] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [160.526970] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [160.527339] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [160.527632] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [160.527917] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [160.528517] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [160.528752] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [160.528996] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [160.530847] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [160.531347] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [160.531714] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [160.532066] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [160.532368] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [160.532661] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [160.532943] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [160.533206] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [160.533462] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [160.533715] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [160.533979] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [160.534228] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [160.534477] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [160.534727] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [160.534985] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [160.535235] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 0: start 0x59008 <7> [160.535482] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 1: start 0x59108 <7> [160.535728] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 2: start 0x59208 <7> [160.535982] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 3: start 0x59308 <7> [160.536222] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:506:pipe D] FQ 4: start 0x593c8 <7> [160.537041] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [160.537449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [160.537899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [160.538271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400 <7> [160.538607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400 <7> [160.538935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [160.539338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [160.539705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [160.540056] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [160.540384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:506:pipe D] enable: no [fastset] <7> [160.540978] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff3032 0x2b432a01) <7> [160.541495] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [160.542073] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [160.542532] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [160.542948] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [160.543313] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:506:pipe D] <7> [160.543643] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800000 0x2b400001) <7> [160.550785] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:510:DP-1] adding connector to sysfs <7> [160.553046] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [160.555974] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:510:DP-1] generating connector hotplug event <7> [160.556109] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:524:DP-2] adding connector to sysfs <7> [160.556920] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [160.558600] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:524:DP-2] generating connector hotplug event <7> [160.558670] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-3] adding connector to sysfs <7> [160.560219] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [160.561800] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-3] generating connector hotplug event <7> [160.561872] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-1] adding connector to sysfs <7> [160.562660] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-1] generating connector hotplug event <6> [160.566945] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [160.566991] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [160.571775] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [160.577702] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7> [160.579025] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [160.579213] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1728 <7> [160.579961] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [160.579968] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [160.581237] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [160.581462] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [160.581654] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:510:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [160.581796] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [160.582043] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [160.582185] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:524:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [160.582307] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [160.582465] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [160.582598] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [160.582714] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [160.583271] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [160.583417] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [160.583538] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [160.583647] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:506:pipe D] not active, skipping <7> [160.583750] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [160.584126] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [160.584666] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [160.588919] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [160.589065] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6> [160.589309] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [160.589487] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [160.589542] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [160.590051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [160.590125] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [160.590130] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [160.590310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [160.590315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [160.590319] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [160.590477] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [160.590482] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [160.590391] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [160.590486] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [160.594812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [160.594822] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.594834] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [160.594838] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [160.594841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [160.594844] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [160.595247] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.595285] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.595377] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7> [160.595379] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.595394] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.596359] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [160.596383] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [160.597086] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [160.597049] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 30 <7> [160.597252] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [160.597346] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] <7> [160.597355] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:DP-1] <7> [160.597407] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [160.597593] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:DP-1] disconnected <7> [160.597600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] <7> [160.597546] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [160.597604] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-2] <7> [160.597682] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [160.597771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-2] disconnected <7> [160.597776] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] <7> [160.597780] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-3] <7> [160.597816] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [160.597961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-3] disconnected <7> [160.597966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] <7> [160.597951] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [160.597970] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:542:HDMI-A-1] <7> [160.598078] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [160.598197] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [160.598314] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [160.598428] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [160.598541] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [160.598654] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [160.598765] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [160.598882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [160.598994] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [160.599105] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [160.599215] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [160.599325] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [160.599434] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [160.599542] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [160.599650] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [160.600433] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [160.600611] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [160.600795] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [160.600989] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [160.601143] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [160.601283] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [160.601419] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [160.602191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-1] disconnected <7> [160.602196] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.602206] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:DP-1] enabled? no <7> [160.602209] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-2] enabled? no <7> [160.602212] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-3] enabled? no <7> [160.602215] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-1] enabled? no <7> [160.602491] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.602515] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.602642] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.602662] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.602744] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [160.616049] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [160.619241] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [160.619399] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [160.619817] [IGT] xe_module_load: exiting, ret=0

Created at 2025-12-22 18:39:16