Results for igt@kms_plane@pixel-format-source-clamping

Result: Fail

i915_display_info6 igt_runner6 results6.json results6-xe-load.json guc_logs6.tar i915_display_info_post_exec6 boot6 dmesg6

DetailValue
Duration 23.37 seconds
Hostname
shard-lnl-5
Igt-Version
IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4292-373a53bd0fb546645+ x86_64)
Out
Using IGT_SRANDOM=1766418027 for randomisation
Opened device: /dev/dri/card0
Starting subtest: pixel-format-source-clamping
Using (pipe A + eDP-1) to run the subtest.
Starting dynamic subtest: pipe-A-plane-0
Testing format XR24(0x34325258) / modifier linear(0x0) on A.0
Testing format C8  (0x20203843) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format RG16(0x36314752) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format XR24(0x34325258) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format XB24(0x34324258) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format AR24(0x34325241) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format AB24(0x34324241) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format XR30(0x30335258) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format XB30(0x30334258) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format AR30(0x30335241) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format AB30(0x30334241) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format XR4H(0x48345258) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format XB4H(0x48344258) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format AR4H(0x48345241) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format AB4H(0x48344241) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format YUYV(0x56595559) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format YVYU(0x55595659) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format UYVY(0x59565955) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format VYUY(0x59555956) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format NV12(0x3231564e) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format P010(0x30313050) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format P012(0x32313050) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format P016(0x36313050) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format Y210(0x30313259) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format Y212(0x32313259) / modifier 4-rc-ccs(0x100000000000010) on A.0
Skipping format Y216(0x36313259) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format XYUV(0x56555958) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV30(0x30335658) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format XV48(0x38345658) / modifier 4-rc-ccs(0x100000000000010) on A.0
Testing format C8  (0x20203843) / modifier 4(0x100000000000009) on A.0
Testing format RG16(0x36314752) / modifier 4(0x100000000000009) on A.0
Testing format XR24(0x34325258) / modifier 4(0x100000000000009) on A.0
Skipping format XB24(0x34324258) / modifier 4(0x100000000000009) on A.0
Skipping format AR24(0x34325241) / modifier 4(0x100000000000009) on A.0
Skipping format AB24(0x34324241) / modifier 4(0x100000000000009) on A.0
Testing format XR30(0x30335258) / modifier 4(0x100000000000009) on A.0
Skipping format XB30(0x30334258) / modifier 4(0x100000000000009) on A.0
Skipping format AR30(0x30335241) / modifier 4(0x100000000000009) on A.0
Skipping format AB30(0x30334241) / modifier 4(0x100000000000009) on A.0
Testing format XR4H(0x48345258) / modifier 4(0x100000000000009) on A.0
Skipping format XB4H(0x48344258) / modifier 4(0x100000000000009) on A.0
Skipping format AR4H(0x48345241) / modifier 4(0x100000000000009) on A.0
Skipping format AB4H(0x48344241) / modifier 4(0x100000000000009) on A.0
Testing format YUYV(0x56595559) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format YVYU(0x55595659) / modifier 4(0x100000000000009) on A.0
Skipping format UYVY(0x59565955) / modifier 4(0x100000000000009) on A.0
Skipping format VYUY(0x59555956) / modifier 4(0x100000000000009) on A.0
Testing format NV12(0x3231564e) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format P010(0x30313050) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format P012(0x32313050) / modifier 4(0x100000000000009) on A.0
Skipping format P016(0x36313050) / modifier 4(0x100000000000009) on A.0
Testing format Y210(0x30313259) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format Y212(0x32313259) / modifier 4(0x100000000000009) on A.0
Skipping format Y216(0x36313259) / modifier 4(0x100000000000009) on A.0
Testing format XYUV(0x56555958) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV30(0x30335658) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format XV48(0x38345658) / modifier 4(0x100000000000009) on A.0
Testing format C8  (0x20203843) / modifier x(0x100000000000001) on A.0
Testing format RG16(0x36314752) / modifier x(0x100000000000001) on A.0
Testing format XR24(0x34325258) / modifier x(0x100000000000001) on A.0
Skipping format XB24(0x34324258) / modifier x(0x100000000000001) on A.0
Skipping format AR24(0x34325241) / modifier x(0x100000000000001) on A.0
Skipping format AB24(0x34324241) / modifier x(0x100000000000001) on A.0
Testing format XR30(0x30335258) / modifier x(0x100000000000001) on A.0
Skipping format XB30(0x30334258) / modifier x(0x100000000000001) on A.0
Skipping format AR30(0x30335241) / modifier x(0x100000000000001) on A.0
Skipping format AB30(0x30334241) / modifier x(0x100000000000001) on A.0
Testing format XR4H(0x48345258) / modifier x(0x100000000000001) on A.0
Skipping format XB4H(0x48344258) / modifier x(0x100000000000001) on A.0
Skipping format AR4H(0x48345241) / modifier x(0x100000000000001) on A.0
Skipping format AB4H(0x48344241) / modifier x(0x100000000000001) on A.0
Testing format YUYV(0x56595559) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format YVYU(0x55595659) / modifier x(0x100000000000001) on A.0
Skipping format UYVY(0x59565955) / modifier x(0x100000000000001) on A.0
Skipping format VYUY(0x59555956) / modifier x(0x100000000000001) on A.0
Testing format NV12(0x3231564e) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format P010(0x30313050) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format P012(0x32313050) / modifier x(0x100000000000001) on A.0
Skipping format P016(0x36313050) / modifier x(0x100000000000001) on A.0
Testing format Y210(0x30313259) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Skipping format Y212(0x32313259) / modifier x(0x100000000000001) on A.0
Skipping format Y216(0x36313259) / modifier x(0x100000000000001) on A.0
Testing format XYUV(0x56555958) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV30(0x30335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Skipping format XV48(0x38345658) / modifier x(0x100000000000001) on A.0
Testing format C8  (0x20203843) / modifier linear(0x0) on A.0
Testing format RG16(0x36314752) / modifier linear(0x0) on A.0
Testing format XB24(0x34324258) / modifier linear(0x0) on A.0
Testing format AR24(0x34325241) / modifier linear(0x0) on A.0
Testing format AB24(0x34324241) / modifier linear(0x0) on A.0
Testing format XR30(0x30335258) / modifier linear(0x0) on A.0
Testing format XB30(0x30334258) / modifier linear(0x0) on A.0
Testing format AR30(0x30335241) / modifier linear(0x0) on A.0
Testing format AB30(0x30334241) / modifier linear(0x0) on A.0
Testing format XR4H(0x48345258) / modifier linear(0x0) on A.0
Testing format XB4H(0x48344258) / modifier linear(0x0) on A.0
Testing format AR4H(0x48345241) / modifier linear(0x0) on A.0
Testing format AB4H(0x48344241) / modifier linear(0x0) on A.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../tests/kms_plane.c:1151 test_pixel_formats()
  #2 ../tests/kms_plane.c:1358 run_test.constprop.0()
  #3 ../tests/kms_plane.c:1377 run_tests_for_pipe_plane.constprop.0()
  #4 ../tests/kms_plane.c:1467 __igt_unique____real_main1454()
  #5 ../tests/kms_plane.c:1454 main()
  #6 [__libc_init_first+0x8a]
  #7 [__libc_start_main+0x8b]
  #8 [_start+0x25]
Dynamic subtest pipe-A-plane-0: FAIL (7.321s)
Starting dynamic subtest: pipe-A-plane-3
Testing format XR24(0x34325258) / modifier linear(0x0) on A.3
Testing format C8  (0x20203843) / modifier 4-rc-ccs(0x100000000000010) on A.3
Testing format RG16(0x36314752) / modifier 4-rc-ccs(0x100000000000010) on A.3
Testing format XR24(0x34325258) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format XB24(0x34324258) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format AR24(0x34325241) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format AB24(0x34324241) / modifier 4-rc-ccs(0x100000000000010) on A.3
Testing format XR30(0x30335258) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format XB30(0x30334258) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format AR30(0x30335241) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format AB30(0x30334241) / modifier 4-rc-ccs(0x100000000000010) on A.3
Testing format YUYV(0x56595559) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Skipping format YVYU(0x55595659) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format UYVY(0x59565955) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format VYUY(0x59555956) / modifier 4-rc-ccs(0x100000000000010) on A.3
Testing format Y210(0x30313259) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Skipping format Y212(0x32313259) / modifier 4-rc-ccs(0x100000000000010) on A.3
Skipping format Y216(0x36313259) / modifier 4-rc-ccs(0x100000000000010) on A.3
Testing format XYUV(0x56555958) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format XV30(0x30335658) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format C8  (0x20203843) / modifier 4(0x100000000000009) on A.3
Testing format RG16(0x36314752) / modifier 4(0x100000000000009) on A.3
Testing format XR24(0x34325258) / modifier 4(0x100000000000009) on A.3
Skipping format XB24(0x34324258) / modifier 4(0x100000000000009) on A.3
Skipping format AR24(0x34325241) / modifier 4(0x100000000000009) on A.3
Skipping format AB24(0x34324241) / modifier 4(0x100000000000009) on A.3
Testing format XR30(0x30335258) / modifier 4(0x100000000000009) on A.3
Skipping format XB30(0x30334258) / modifier 4(0x100000000000009) on A.3
Skipping format AR30(0x30335241) / modifier 4(0x100000000000009) on A.3
Skipping format AB30(0x30334241) / modifier 4(0x100000000000009) on A.3
Testing format YUYV(0x56595559) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Skipping format YVYU(0x55595659) / modifier 4(0x100000000000009) on A.3
Skipping format UYVY(0x59565955) / modifier 4(0x100000000000009) on A.3
Skipping format VYUY(0x59555956) / modifier 4(0x100000000000009) on A.3
Testing format Y210(0x30313259) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Skipping format Y212(0x32313259) / modifier 4(0x100000000000009) on A.3
Skipping format Y216(0x36313259) / modifier 4(0x100000000000009) on A.3
Testing format XYUV(0x56555958) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format XV30(0x30335658) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format C8  (0x20203843) / modifier x(0x100000000000001) on A.3
Testing format RG16(0x36314752) / modifier x(0x100000000000001) on A.3
Testing format XR24(0x34325258) / modifier x(0x100000000000001) on A.3
Skipping format XB24(0x34324258) / modifier x(0x100000000000001) on A.3
Skipping format AR24(0x34325241) / modifier x(0x100000000000001) on A.3
Skipping format AB24(0x34324241) / modifier x(0x100000000000001) on A.3
Testing format XR30(0x30335258) / modifier x(0x100000000000001) on A.3
Skipping format XB30(0x30334258) / modifier x(0x100000000000001) on A.3
Skipping format AR30(0x30335241) / modifier x(0x100000000000001) on A.3
Skipping format AB30(0x30334241) / modifier x(0x100000000000001) on A.3
Testing format YUYV(0x56595559) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Skipping format YVYU(0x55595659) / modifier x(0x100000000000001) on A.3
Skipping format UYVY(0x59565955) / modifier x(0x100000000000001) on A.3
Skipping format VYUY(0x59555956) / modifier x(0x100000000000001) on A.3
Testing format Y210(0x30313259) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Skipping format Y212(0x32313259) / modifier x(0x100000000000001) on A.3
Skipping format Y216(0x36313259) / modifier x(0x100000000000001) on A.3
Testing format XYUV(0x56555958) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format XV30(0x30335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format C8  (0x20203843) / modifier linear(0x0) on A.3
Testing format RG16(0x36314752) / modifier linear(0x0) on A.3
Testing format XB24(0x34324258) / modifier linear(0x0) on A.3
Testing format AR24(0x34325241) / modifier linear(0x0) on A.3
Testing format AB24(0x34324241) / modifier linear(0x0) on A.3
Testing format XR30(0x30335258) / modifier linear(0x0) on A.3
Testing format XB30(0x30334258) / modifier linear(0x0) on A.3
Testing format AR30(0x30335241) / modifier linear(0x0) on A.3
Testing format AB30(0x30334241) / modifier linear(0x0) on A.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.3
Dynamic subtest pipe-A-plane-3: SUCCESS (3.543s)
Starting dynamic subtest: pipe-A-plane-5
Dynamic subtest pipe-A-plane-5: SUCCESS (0.000s)
Using (pipe B + eDP-1) to run the subtest.
Starting dynamic subtest: pipe-B-plane-0
Testing format XR24(0x34325258) / modifier linear(0x0) on B.0
Testing format C8  (0x20203843) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format RG16(0x36314752) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format XR24(0x34325258) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format XB24(0x34324258) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format AR24(0x34325241) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format AB24(0x34324241) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format XR30(0x30335258) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format XB30(0x30334258) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format AR30(0x30335241) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format AB30(0x30334241) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format XR4H(0x48345258) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format XB4H(0x48344258) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format AR4H(0x48345241) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format AB4H(0x48344241) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format YUYV(0x56595559) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format YVYU(0x55595659) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format UYVY(0x59565955) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format VYUY(0x59555956) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format NV12(0x3231564e) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format P010(0x30313050) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format P012(0x32313050) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format P016(0x36313050) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format Y210(0x30313259) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format Y212(0x32313259) / modifier 4-rc-ccs(0x100000000000010) on B.0
Skipping format Y216(0x36313259) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format XYUV(0x56555958) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV30(0x30335658) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format XV48(0x38345658) / modifier 4-rc-ccs(0x100000000000010) on B.0
Testing format C8  (0x20203843) / modifier 4(0x100000000000009) on B.0
Testing format RG16(0x36314752) / modifier 4(0x100000000000009) on B.0
Testing format XR24(0x34325258) / modifier 4(0x100000000000009) on B.0
Skipping format XB24(0x34324258) / modifier 4(0x100000000000009) on B.0
Skipping format AR24(0x34325241) / modifier 4(0x100000000000009) on B.0
Skipping format AB24(0x34324241) / modifier 4(0x100000000000009) on B.0
Testing format XR30(0x30335258) / modifier 4(0x100000000000009) on B.0
Skipping format XB30(0x30334258) / modifier 4(0x100000000000009) on B.0
Skipping format AR30(0x30335241) / modifier 4(0x100000000000009) on B.0
Skipping format AB30(0x30334241) / modifier 4(0x100000000000009) on B.0
Testing format XR4H(0x48345258) / modifier 4(0x100000000000009) on B.0
Skipping format XB4H(0x48344258) / modifier 4(0x100000000000009) on B.0
Skipping format AR4H(0x48345241) / modifier 4(0x100000000000009) on B.0
Skipping format AB4H(0x48344241) / modifier 4(0x100000000000009) on B.0
Testing format YUYV(0x56595559) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format YVYU(0x55595659) / modifier 4(0x100000000000009) on B.0
Skipping format UYVY(0x59565955) / modifier 4(0x100000000000009) on B.0
Skipping format VYUY(0x59555956) / modifier 4(0x100000000000009) on B.0
Testing format NV12(0x3231564e) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format P010(0x30313050) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format P012(0x32313050) / modifier 4(0x100000000000009) on B.0
Skipping format P016(0x36313050) / modifier 4(0x100000000000009) on B.0
Testing format Y210(0x30313259) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format Y212(0x32313259) / modifier 4(0x100000000000009) on B.0
Skipping format Y216(0x36313259) / modifier 4(0x100000000000009) on B.0
Testing format XYUV(0x56555958) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV30(0x30335658) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format XV48(0x38345658) / modifier 4(0x100000000000009) on B.0
Testing format C8  (0x20203843) / modifier x(0x100000000000001) on B.0
Testing format RG16(0x36314752) / modifier x(0x100000000000001) on B.0
Testing format XR24(0x34325258) / modifier x(0x100000000000001) on B.0
Skipping format XB24(0x34324258) / modifier x(0x100000000000001) on B.0
Skipping format AR24(0x34325241) / modifier x(0x100000000000001) on B.0
Skipping format AB24(0x34324241) / modifier x(0x100000000000001) on B.0
Testing format XR30(0x30335258) / modifier x(0x100000000000001) on B.0
Skipping format XB30(0x30334258) / modifier x(0x100000000000001) on B.0
Skipping format AR30(0x30335241) / modifier x(0x100000000000001) on B.0
Skipping format AB30(0x30334241) / modifier x(0x100000000000001) on B.0
Testing format XR4H(0x48345258) / modifier x(0x100000000000001) on B.0
Skipping format XB4H(0x48344258) / modifier x(0x100000000000001) on B.0
Skipping format AR4H(0x48345241) / modifier x(0x100000000000001) on B.0
Skipping format AB4H(0x48344241) / modifier x(0x100000000000001) on B.0
Testing format YUYV(0x56595559) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format YVYU(0x55595659) / modifier x(0x100000000000001) on B.0
Skipping format UYVY(0x59565955) / modifier x(0x100000000000001) on B.0
Skipping format VYUY(0x59555956) / modifier x(0x100000000000001) on B.0
Testing format NV12(0x3231564e) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format P010(0x30313050) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format P012(0x32313050) / modifier x(0x100000000000001) on B.0
Skipping format P016(0x36313050) / modifier x(0x100000000000001) on B.0
Testing format Y210(0x30313259) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Skipping format Y212(0x32313259) / modifier x(0x100000000000001) on B.0
Skipping format Y216(0x36313259) / modifier x(0x100000000000001) on B.0
Testing format XYUV(0x56555958) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV30(0x30335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier x(0x100000000000001) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Skipping format XV48(0x38345658) / modifier x(0x100000000000001) on B.0
Testing format C8  (0x20203843) / modifier linear(0x0) on B.0
Testing format RG16(0x36314752) / modifier linear(0x0) on B.0
Testing format XB24(0x34324258) / modifier linear(0x0) on B.0
Testing format AR24(0x34325241) / modifier linear(0x0) on B.0
Testing format AB24(0x34324241) / modifier linear(0x0) on B.0
Testing format XR30(0x30335258) / modifier linear(0x0) on B.0
Testing format XB30(0x30334258) / modifier linear(0x0) on B.0
Testing format AR30(0x30335241) / modifier linear(0x0) on B.0
Testing format AB30(0x30334241) / modifier linear(0x0) on B.0
Testing format XR4H(0x48345258) / modifier linear(0x0) on B.0
Testing format XB4H(0x48344258) / modifier linear(0x0) on B.0
Testing format AR4H(0x48345241) / modifier linear(0x0) on B.0
Testing format AB4H(0x48344241) / modifier linear(0x0) on B.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format NV12(0x3231564e) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format P010(0x30313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format P012(0x32313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format P016(0x36313050) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format XV36(0x36335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../tests/kms_plane.c:1151 test_pixel_formats()
  #2 ../tests/kms_plane.c:1358 run_test.constprop.0()
  #3 ../tests/kms_plane.c:1377 run_tests_for_pipe_plane.constprop.0()
  #4 ../tests/kms_plane.c:1467 __igt_unique____real_main1454()
  #5 ../tests/kms_plane.c:1454 main()
  #6 [__libc_init_first+0x8a]
  #7 [__libc_start_main+0x8b]
  #8 [_start+0x25]
Dynamic subtest pipe-B-plane-0: FAIL (7.345s)
Starting dynamic subtest: pipe-B-plane-3
Testing format XR24(0x34325258) / modifier linear(0x0) on B.3
Testing format C8  (0x20203843) / modifier 4-rc-ccs(0x100000000000010) on B.3
Testing format RG16(0x36314752) / modifier 4-rc-ccs(0x100000000000010) on B.3
Testing format XR24(0x34325258) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format XB24(0x34324258) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format AR24(0x34325241) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format AB24(0x34324241) / modifier 4-rc-ccs(0x100000000000010) on B.3
Testing format XR30(0x30335258) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format XB30(0x30334258) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format AR30(0x30335241) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format AB30(0x30334241) / modifier 4-rc-ccs(0x100000000000010) on B.3
Testing format YUYV(0x56595559) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Skipping format YVYU(0x55595659) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format UYVY(0x59565955) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format VYUY(0x59555956) / modifier 4-rc-ccs(0x100000000000010) on B.3
Testing format Y210(0x30313259) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Skipping format Y212(0x32313259) / modifier 4-rc-ccs(0x100000000000010) on B.3
Skipping format Y216(0x36313259) / modifier 4-rc-ccs(0x100000000000010) on B.3
Testing format XYUV(0x56555958) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format XV30(0x30335658) / modifier 4-rc-ccs(0x100000000000010) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format C8  (0x20203843) / modifier 4(0x100000000000009) on B.3
Testing format RG16(0x36314752) / modifier 4(0x100000000000009) on B.3
Testing format XR24(0x34325258) / modifier 4(0x100000000000009) on B.3
Skipping format XB24(0x34324258) / modifier 4(0x100000000000009) on B.3
Skipping format AR24(0x34325241) / modifier 4(0x100000000000009) on B.3
Skipping format AB24(0x34324241) / modifier 4(0x100000000000009) on B.3
Testing format XR30(0x30335258) / modifier 4(0x100000000000009) on B.3
Skipping format XB30(0x30334258) / modifier 4(0x100000000000009) on B.3
Skipping format AR30(0x30335241) / modifier 4(0x100000000000009) on B.3
Skipping format AB30(0x30334241) / modifier 4(0x100000000000009) on B.3
Testing format YUYV(0x56595559) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Skipping format YVYU(0x55595659) / modifier 4(0x100000000000009) on B.3
Skipping format UYVY(0x59565955) / modifier 4(0x100000000000009) on B.3
Skipping format VYUY(0x59555956) / modifier 4(0x100000000000009) on B.3
Testing format Y210(0x30313259) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Skipping format Y212(0x32313259) / modifier 4(0x100000000000009) on B.3
Skipping format Y216(0x36313259) / modifier 4(0x100000000000009) on B.3
Testing format XYUV(0x56555958) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format XV30(0x30335658) / modifier 4(0x100000000000009) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format C8  (0x20203843) / modifier x(0x100000000000001) on B.3
Testing format RG16(0x36314752) / modifier x(0x100000000000001) on B.3
Testing format XR24(0x34325258) / modifier x(0x100000000000001) on B.3
Skipping format XB24(0x34324258) / modifier x(0x100000000000001) on B.3
Skipping format AR24(0x34325241) / modifier x(0x100000000000001) on B.3
Skipping format AB24(0x34324241) / modifier x(0x100000000000001) on B.3
Testing format XR30(0x30335258) / modifier x(0x100000000000001) on B.3
Skipping format XB30(0x30334258) / modifier x(0x100000000000001) on B.3
Skipping format AR30(0x30335241) / modifier x(0x100000000000001) on B.3
Skipping format AB30(0x30334241) / modifier x(0x100000000000001) on B.3
Testing format YUYV(0x56595559) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Skipping format YVYU(0x55595659) / modifier x(0x100000000000001) on B.3
Skipping format UYVY(0x59565955) / modifier x(0x100000000000001) on B.3
Skipping format VYUY(0x59555956) / modifier x(0x100000000000001) on B.3
Testing format Y210(0x30313259) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Skipping format Y212(0x32313259) / modifier x(0x100000000000001) on B.3
Skipping format Y216(0x36313259) / modifier x(0x100000000000001) on B.3
Testing format XYUV(0x56555958) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format XV30(0x30335658) / modifier x(0x100000000000001) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format C8  (0x20203843) / modifier linear(0x0) on B.3
Testing format RG16(0x36314752) / modifier linear(0x0) on B.3
Testing format XB24(0x34324258) / modifier linear(0x0) on B.3
Testing format AR24(0x34325241) / modifier linear(0x0) on B.3
Testing format AB24(0x34324241) / modifier linear(0x0) on B.3
Testing format XR30(0x30335258) / modifier linear(0x0) on B.3
Testing format XB30(0x30334258) / modifier linear(0x0) on B.3
Testing format AR30(0x30335241) / modifier linear(0x0) on B.3
Testing format AB30(0x30334241) / modifier linear(0x0) on B.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format YUYV(0x56595559) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format YVYU(0x55595659) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format UYVY(0x59565955) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format VYUY(0x59555956) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format Y210(0x30313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format Y212(0x32313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format Y216(0x36313259) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format XYUV(0x56555958) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.3
Testing format XV30(0x30335658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.3
Dynamic subtest pipe-B-plane-3: SUCCESS (3.567s)
Starting dynamic subtest: pipe-B-plane-5
Dynamic subtest pipe-B-plane-5: SUCCESS (0.000s)
Subtest pixel-format-source-clamping: FAIL (23.374s)
Err
Starting subtest: pixel-format-source-clamping
Starting dynamic subtest: pipe-A-plane-0
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XR4H(0x48345258) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on A.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) CRITICAL: Test assertion failure function test_format_plane, file ../tests/kms_plane.c:1151:
(kms_plane:3751) CRITICAL: Failed assertion: result
(kms_plane:3751) CRITICAL: At least one CRC mismatch happened
Dynamic subtest pipe-A-plane-0 failed.
**** DEBUG ****
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x2/2
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on A.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on A.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(427)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on A.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on A.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(427)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on A.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x2/2
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on A.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(427)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: A.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x2/2
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_fb(428)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_plane:3751) CRITICAL: Test assertion failure function test_format_plane, file ../tests/kms_plane.c:1151:
(kms_plane:3751) CRITICAL: Failed assertion: result
(kms_plane:3751) CRITICAL: At least one CRC mismatch happened
(kms_plane:3751) igt_core-INFO: Stack trace:
(kms_plane:3751) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_plane:3751) igt_core-INFO:   #1 ../tests/kms_plane.c:1151 test_pixel_formats()
(kms_plane:3751) igt_core-INFO:   #2 ../tests/kms_plane.c:1358 run_test.constprop.0()
(kms_plane:3751) igt_core-INFO:   #3 ../tests/kms_plane.c:1377 run_tests_for_pipe_plane.constprop.0()
(kms_plane:3751) igt_core-INFO:   #4 ../tests/kms_plane.c:1467 __igt_unique____real_main1454()
(kms_plane:3751) igt_core-INFO:   #5 ../tests/kms_plane.c:1454 main()
(kms_plane:3751) igt_core-INFO:   #6 [__libc_init_first+0x8a]
(kms_plane:3751) igt_core-INFO:   #7 [__libc_start_main+0x8b]
(kms_plane:3751) igt_core-INFO:   #8 [_start+0x25]
****  END  ****
Dynamic subtest pipe-A-plane-0: FAIL (7.321s)
Starting dynamic subtest: pipe-A-plane-3
Dynamic subtest pipe-A-plane-3: SUCCESS (3.543s)
Starting dynamic subtest: pipe-A-plane-5
Dynamic subtest pipe-A-plane-5: SUCCESS (0.000s)
Starting dynamic subtest: pipe-B-plane-0
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XR4H(0x48345258) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) WARNING: Warning on condition crc_mismatch_count in function test_format_plane_colors, file ../tests/kms_plane.c:873
(kms_plane:3751) WARNING: CRC mismatches with format XV36(0x36335658) on B.0 with 1/4 solid colors tested (0x1)
(kms_plane:3751) CRITICAL: Test assertion failure function test_format_plane, file ../tests/kms_plane.c:1151:
(kms_plane:3751) CRITICAL: Failed assertion: result
(kms_plane:3751) CRITICAL: At least one CRC mismatch happened
Dynamic subtest pipe-B-plane-0 failed.
**** DEBUG ****
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x2/2
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr limited range) on B.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(432)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 432
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1b0/432
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.601 YCbCr, YCbCr full range) on B.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(427)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr limited range) on B.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(432)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 432
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1b0/432
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.709 YCbCr, YCbCr full range) on B.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(427)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr limited range) on B.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(432)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 432
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1b0/432
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x2/2
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) INFO: Testing format XV48(0x38345658) / modifier linear(0x0) (ITU-R BT.2020 YCbCr, YCbCr full range) on B.0
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=72, height=72, format=XV48(0x38345658), modifier=0x0, size=0)
(kms_plane:3751) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=576)
(kms_plane:3751) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(427)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(72x72)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(4,4)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(64x64)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (64x64)
(kms_plane:3751) igt_kms-DEBUG: display: commit {
(kms_plane:3751) igt_kms-DEBUG: display:     populating plane data: B.0, fb 427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x40000/262144
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x400000/4194304
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x40/64
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x1ab/427
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x10c/268
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x2/2
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x1/1
(kms_plane:3751) igt_kms-DEBUG: plane B.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_plane:3751) igt_kms-DEBUG: display: }
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_fb(428)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: plane_set_size (2880x1800)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_position(0,0)
(kms_plane:3751) igt_kms-DEBUG: display: B.0: fb_set_size(2880x1800)
(kms_plane:3751) CRITICAL: Test assertion failure function test_format_plane, file ../tests/kms_plane.c:1151:
(kms_plane:3751) CRITICAL: Failed assertion: result
(kms_plane:3751) CRITICAL: At least one CRC mismatch happened
(kms_plane:3751) igt_core-INFO: Stack trace:
(kms_plane:3751) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_plane:3751) igt_core-INFO:   #1 ../tests/kms_plane.c:1151 test_pixel_formats()
(kms_plane:3751) igt_core-INFO:   #2 ../tests/kms_plane.c:1358 run_test.constprop.0()
(kms_plane:3751) igt_core-INFO:   #3 ../tests/kms_plane.c:1377 run_tests_for_pipe_plane.constprop.0()
(kms_plane:3751) igt_core-INFO:   #4 ../tests/kms_plane.c:1467 __igt_unique____real_main1454()
(kms_plane:3751) igt_core-INFO:   #5 ../tests/kms_plane.c:1454 main()
(kms_plane:3751) igt_core-INFO:   #6 [__libc_init_first+0x8a]
(kms_plane:3751) igt_core-INFO:   #7 [__libc_start_main+0x8b]
(kms_plane:3751) igt_core-INFO:   #8 [_start+0x25]
****  END  ****
Dynamic subtest pipe-B-plane-0: FAIL (7.345s)
Starting dynamic subtest: pipe-B-plane-3
Dynamic subtest pipe-B-plane-3: SUCCESS (3.567s)
Starting dynamic subtest: pipe-B-plane-5
Dynamic subtest pipe-B-plane-5: SUCCESS (0.000s)
Subtest pixel-format-source-clamping: FAIL (23.374s)
Dmesg
<6> [287.032490] Console: switching to colour dummy device 80x25
<6> [287.032865] [IGT] kms_plane: executing
<7> [287.041117] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [287.041132] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [287.041316] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [287.041669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [287.041673] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [287.041809] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [287.042171] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [287.042175] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [287.042306] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<7> [287.042711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]
<7> [287.042716] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]
<7> [287.043176] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [287.043486] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [287.043581] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [287.043675] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [287.043798] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [287.043804] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [287.043807] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [287.043808] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [287.043811] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [287.043813] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [287.043815] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor
<5> [287.043818] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [287.043819] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0
<5> [287.043822] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [287.043839] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes
<7> [287.043934] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [287.044096] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [287.044742] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [287.044746] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [287.044747] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [287.044864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:
<7> [287.044869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [287.044873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [287.044893] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [287.044897] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [287.045057] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [287.045073] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [287.045077] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [287.045209] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [287.045223] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [287.045227] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [287.045358] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<6> [287.046017] [IGT] kms_plane: starting subtest pixel-format-source-clamping
<7> [287.057302] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:428]
<7> [287.060445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.060614] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.075230] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<6> [287.091813] [IGT] kms_plane: starting dynamic subtest pipe-A-plane-0
<7> [287.092122] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [287.092608] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [287.092929] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [287.093266] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [287.093539] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update not enabled because it would inhibit pipe CRC calculation
<7> [287.093773] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [287.094091] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [287.094518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [fastset]
<7> [287.094847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [287.095176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [287.095481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [287.095772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [287.096107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [287.096448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [287.096753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [287.097132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [287.097471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [287.097795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [287.098148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [287.098475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [287.098782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [287.099103] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [287.099393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [287.099683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [287.099945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [287.100256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [287.100513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [287.100758] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [287.101048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [287.101285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [287.101514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [287.101742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [287.102117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [287.102329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [287.102581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [287.102799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [287.103098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [287.103292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [287.103482] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [287.103660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [287.103838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [287.104017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [287.104184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [287.104360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [287.104523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [287.104678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [287.104828] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [287.104983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [287.105129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [287.105270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [287.105411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [287.105549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [287.105683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [287.105819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [287.105977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [287.106119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [287.106241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [287.106363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [287.106485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [287.106602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [287.106718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [287.106830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [287.106945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [287.107099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [287.107229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:428] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [287.107362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [287.107476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [287.107971] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [287.129745] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [287.130127] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7> [287.141190] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [287.142567] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [287.142911] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [287.164067] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.164593] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.165899] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.192018] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.192338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.192690] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [287.193079] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [287.193378] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [287.194474] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.195548] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.195841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [287.196170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [287.196452] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [287.197274] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.197718] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.241825] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [287.242139] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.242702] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [287.242605] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.243027] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.243387] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [287.243424] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.243877] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.258172] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [287.258753] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.274899] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [287.275573] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [287.291579] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [287.325154] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.325684] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.326116] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.326511] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.326943] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.342159] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.359183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.359659] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.360099] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.360800] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.361415] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [287.361736] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [287.362090] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [287.362453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 347710 num active planes 1
<7> [287.362848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [287.363266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [287.363640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [287.364015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [287.364414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [287.366533] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.366836] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.374500] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:33:plane 1A]
<7> [287.425666] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.442067] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.442604] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.443107] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.444418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [287.444902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [287.445603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [287.446055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [287.446420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [287.446792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [287.448062] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.448380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.449156] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 131072 bytes of contiguous stolen space for FBC, limit: 2
<7> [287.449386] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7> [287.475099] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.475414] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.475746] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.476299] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.493435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.493754] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [287.494004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [287.494645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [287.494986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [287.495319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [287.495590] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [287.495838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [287.496094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [287.496361] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [287.497042] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.497266] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.541941] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.542082] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.542666] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.543192] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.568342] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.568858] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.574443] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:33:plane 1A]
<7> [287.610115] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.610725] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.610656] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.611095] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.633578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.633875] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [287.634099] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [287.634256] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [287.634471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [287.634751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [287.634989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [287.635240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [287.635466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [287.635674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [287.635961] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43464 kHz
<7> [287.637089] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.637342] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.658641] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.659068] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.659286] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.659454] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.669512] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.669640] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [287.669721] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [287.669794] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [287.669887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [287.670006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [287.670162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [287.670278] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [287.670393] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [287.670505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [287.670966] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.671102] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.692727] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.693102] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.693560] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.693953] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.710865] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.711147] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1354), size 4051 -> 1354
<7> [287.711254] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1354 - 4051), size 0 -> 2697
<7> [287.711346] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.711434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [287.711519] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [287.711598] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [287.711709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [287.711848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [287.711975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [287.712118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [287.712242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [287.712368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [287.713083] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [287.713399] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.713584] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.715960] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [287.726651] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.727069] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [287.727662] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.741323] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.741860] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [287.742652] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.757927] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.758700] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [287.792778] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.793135] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.793597] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.794045] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.812131] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.812451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [287.812726] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.812857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [287.813060] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.813199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [287.813342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [287.813489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [287.813633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [287.813778] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [287.813908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [287.814462] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [287.814631] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.814759] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.815054] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [287.824846] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.827158] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [287.828849] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.841257] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.841775] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [287.842835] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.861272] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [287.862475] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [287.892114] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.892520] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.892724] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.893303] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.912576] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1354) -> ( 0 - 4051), size 1354 -> 4051
<7> [287.912972] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1354 - 4051) -> ( 0 - 0), size 2697 -> 0
<7> [287.913454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [287.913752] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [287.914034] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [287.914433] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [287.914707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [287.914954] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [287.915204] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [287.915403] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [287.915688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [287.915985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [287.916290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [287.916606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [287.916872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [287.917110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [287.917873] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.918112] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.942448] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [287.943129] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.943568] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.943981] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [287.958590] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [287.958938] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [287.992492] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [287.993157] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [287.993708] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [287.994224] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.012290] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.012788] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.042452] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [288.042277] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.042850] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.043397] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.057233] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [288.057230] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [288.057245] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [288.061733] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.062080] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.062606] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [288.062895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [288.063252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [288.063640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [288.063943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [288.064255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [288.064583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [288.064838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [288.065582] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.065829] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.092299] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.092919] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.093518] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.093990] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.094485] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.108883] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.125290] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.125802] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.126276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.127884] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.128295] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.128619] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [288.128938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [288.129337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 347710 num active planes 1
<7> [288.129760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [288.130184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [288.130644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [288.131039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [288.131476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [288.132935] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.133419] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.175376] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.193216] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.193724] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.194268] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.195092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [288.195864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [288.196248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [288.196581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [288.196897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [288.197256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [288.197589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [288.198565] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.198824] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.199363] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 131072 bytes of contiguous stolen space for FBC, limit: 2
<7> [288.199564] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7> [288.225004] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.225282] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.225755] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.226187] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.242496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.242861] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.243647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [288.243975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [288.244443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [288.244867] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [288.245306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [288.245715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [288.246114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [288.246534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [288.247593] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.247940] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.292100] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.293302] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.293854] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.294405] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.315078] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.315554] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.324332] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:33:plane 1A]
<7> [288.358586] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.359334] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.359906] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.360455] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.378689] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.379065] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.379478] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [288.379790] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [288.380210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [288.380638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [288.381056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [288.381562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [288.381930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [288.382521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [288.383456] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.383775] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.408333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.408888] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.409230] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.409434] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.428253] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.428649] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.429008] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [288.429571] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [288.429959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [288.430637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [288.431010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [288.431384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [288.431715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [288.432068] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [288.432884] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.433172] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.441868] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [288.459217] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.459218] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.459689] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.460083] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.480060] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.480842] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1354), size 4051 -> 1354
<7> [288.481207] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1354 - 4051), size 0 -> 2697
<7> [288.481519] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.481817] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.482194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [288.482458] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [288.482822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [288.483200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [288.483544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [288.483864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [288.484315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [288.484599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [288.485304] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [288.485553] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.485856] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.486654] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [288.507885] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.508233] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.508485] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.508703] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [288.508667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.509027] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.509300] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.509905] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.524434] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.524846] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [288.526767] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.541133] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.542458] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [288.576249] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.576813] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.577260] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.578238] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.593407] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.593582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [288.593708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [288.593821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [288.593932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [288.594040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [288.594145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [288.594550] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [288.594719] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.594838] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.595164] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [288.607796] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.608316] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [288.609106] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.624587] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.625273] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [288.626761] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.641101] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [288.641896] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [288.676080] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.676249] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.676779] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.677242] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.693764] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1354) -> ( 0 - 4051), size 1354 -> 4051
<7> [288.693984] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1354 - 4051) -> ( 0 - 0), size 2697 -> 0
<7> [288.694086] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.694178] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.694324] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [288.694418] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [288.694516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [288.694605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [288.694696] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [288.694795] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [288.694930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [288.695078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [288.695241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [288.695385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [288.695514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [288.695627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [288.696385] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.696514] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.726086] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.726248] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.726676] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.727038] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.748671] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.749002] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.775637] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.776268] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.776722] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.777106] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.799344] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.799723] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.825275] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.825612] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [288.825723] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.826113] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.844799] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.845189] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [288.845515] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [288.845787] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [288.846115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [288.846568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [288.846975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [288.847412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [288.847801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [288.848183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [288.849771] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.850184] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [288.891930] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [288.893036] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.893465] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [288.893788] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [288.894130] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [288.894549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 347710 num active planes 1
<7> [288.894963] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [288.895394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [288.895808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [288.896193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [288.896663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [288.941910] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [288.942750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.943110] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [288.943616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [288.943944] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [288.944349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [288.944767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [288.945171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [288.945629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [288.946022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [288.946519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [288.948370] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 524288 bytes of contiguous stolen space for FBC, limit: 2
<7> [288.948761] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7> [288.974872] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [288.975309] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [288.975593] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [288.975759] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [288.975913] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [288.976146] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [288.976197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [288.976638] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [288.977001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [288.977458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [288.977923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [288.978353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [288.978737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [288.979150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [288.980280] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [288.980690] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.025101] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.025323] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.025797] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.026179] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.030814] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.031248] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.040890] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:33:plane 1A]
<7> [289.074877] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.075444] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.075859] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.076170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.076214] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.076539] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [289.076819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [289.077121] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [289.077450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [289.077955] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.078239] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [289.078551] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [289.078813] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [289.079082] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [289.079472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [289.079824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [289.080172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [289.080601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [289.081004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [289.082186] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.082603] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.108427] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.108925] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.108890] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.109311] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.109698] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.110012] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [289.110325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [289.110592] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [289.110900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [289.111393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.111646] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [289.111891] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [289.112150] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [289.112452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [289.112812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [289.113172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [289.113565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [289.113943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [289.114297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [289.115303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.115671] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.141413] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.141799] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.142219] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.142124] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.142815] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.143118] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [289.143384] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [289.143614] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.143836] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [289.144053] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [289.144291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [289.144548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [289.145005] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.145303] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [289.145544] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [289.145777] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.146006] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [289.146235] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [289.146666] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [289.146972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [289.147456] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.147747] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [289.147984] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [289.148215] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.148554] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [289.148802] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [289.149037] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [289.149271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [289.149692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [289.150076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [289.150454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [289.150759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [289.151038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [289.151791] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [289.152356] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.153066] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [289.154172] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.157609] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.158000] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [289.158754] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.174453] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.175242] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [289.176547] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.191063] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.192012] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [289.225349] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.225667] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.225894] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.226387] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.226729] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.227109] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.227458] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [289.227748] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [289.228044] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [289.228345] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.228616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [289.228885] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [289.229146] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [289.229497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [289.229903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [289.230322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [289.230769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [289.231180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [289.231597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [289.232590] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [289.232928] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.233421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.234138] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [289.241062] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.242085] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [289.243057] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.257734] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.258485] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [289.259711] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.274478] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [289.275181] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [289.308344] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.308713] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.308783] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.309182] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.309765] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [289.310083] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [289.310421] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [289.310707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.310987] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.311310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.311628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [289.312179] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [289.312498] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [289.312811] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [289.313081] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.313369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.313671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.313944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [289.314514] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [289.314801] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [289.315045] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [289.315297] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.315621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.315888] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [289.316137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [289.316583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [289.317014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [289.317424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [289.317799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [289.318164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [289.319351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.319762] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.342123] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.342470] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.342971] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.343448] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.343876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.344371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.375291] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.375468] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.375971] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.376442] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.377057] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.377658] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.408643] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.408471] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.408965] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.409429] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.409766] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.410082] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [289.410491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [289.410838] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [289.411171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [289.411638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [289.412047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [289.412471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [289.412855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [289.413279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [289.414411] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.414833] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.441459] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.441881] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.442111] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.442235] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.443715] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.444192] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.475417] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.475388] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.475872] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.476256] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.476994] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.477465] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.508587] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.508385] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.508852] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.509236] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.510214] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.510649] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.541505] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.541949] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.541956] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.542380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.543546] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.543965] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.575247] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [289.575505] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.575921] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.576275] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.576710] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.577125] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.608508] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.609013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.609507] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.609979] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.610453] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.624900] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [289.625854] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.626113] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [289.626387] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [289.626651] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [289.627002] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 347710 num active planes 1
<7> [289.627425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [289.627831] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [289.628229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [289.628660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [289.629066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [289.657439] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD off
<7> [289.657899] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [289.659000] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.659528] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.659952] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.660399] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.660870] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.675333] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.676009] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.676334] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [289.676764] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [289.677087] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [289.677578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [289.677984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [289.678394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [289.678776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [289.679152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [289.679600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [289.681409] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 32768 bytes of contiguous stolen space for FBC, limit: 2
<7> [289.681848] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7> [289.708074] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [289.708543] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.709044] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.709132] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [289.709525] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [289.709522] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.709839] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [289.710147] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [289.710527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [289.710941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [289.711341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [289.711803] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [289.712188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [289.712610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [289.713564] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.713972] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.758270] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.758509] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.759072] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.759608] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.760081] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.760643] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.808258] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [289.808572] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.809142] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.809687] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.810158] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.810730] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.858189] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.858591] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.859157] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.859675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.864286] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.864837] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.874097] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:33:plane 1A]
<7> [289.908080] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [289.908581] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.909068] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.909533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.911807] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.912267] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.941340] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [289.941557] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.942052] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.942521] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.945031] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.945493] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [289.974657] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [289.975534] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [289.976027] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [289.976495] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [289.978317] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [289.978816] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.007947] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.008452] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.008918] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.009098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [290.009271] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.009359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [290.009707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [290.009969] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [290.010306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [290.010752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [290.011149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [290.011560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [290.011992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [290.012380] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [290.013380] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.013846] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.041282] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.041576] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.041960] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.042308] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.042951] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.043356] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.074561] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.074540] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.074950] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.075303] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.076148] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.076615] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.108031] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.108591] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.109084] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.109564] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.109994] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.110416] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.141741] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.141540] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.142028] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.142525] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [290.142491] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.142845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [290.143145] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [290.143470] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [290.143790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 695420 num active planes 1
<7> [290.144198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [290.144625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [290.145081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [290.145489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [290.145883] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [290.146831] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.147229] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.174602] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.175072] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.175018] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.175385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.176215] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.176712] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.208584] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.208602] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.209099] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.209573] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.209999] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.210438] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.241616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.241603] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.242024] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.242400] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.242856] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.243240] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.274547] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.275005] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.274937] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.275262] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.276025] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.276369] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.308451] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.308577] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.309123] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.309647] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.310122] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.310655] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.341715] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.341577] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.342074] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.342533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.342963] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.343398] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.374613] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.375139] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.375101] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.375588] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.376556] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.377019] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.408411] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.408632] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.409128] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.409589] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.410022] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.410438] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.441704] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.441646] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.442095] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.442563] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.442981] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.443390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.474540] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.474974] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.475190] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.475371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.476582] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.477052] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.508383] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.508554] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.508964] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.509388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.509880] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.510365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.541789] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.541645] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.542140] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.542596] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.543080] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.543541] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.574647] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.575065] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.575135] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.575594] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.576272] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.576785] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.608436] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.608554] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.609025] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.609450] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.609987] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.610432] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.641668] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.641556] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.641961] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.642328] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.642866] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.643278] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.674668] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.675007] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.675161] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.675620] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.676217] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.676671] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.708314] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.708701] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.709131] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.709489] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.709960] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.710336] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.741674] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.741611] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.742103] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.742569] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.743033] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.743432] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.774609] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.774839] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.774997] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.775326] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.775803] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.776148] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.808308] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.808605] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.809099] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.809531] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.810080] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.810517] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.841686] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.841699] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.842190] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.842685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.843144] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.843618] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.874673] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.874963] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.875118] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.875527] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.876225] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.876661] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.908269] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.908726] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.909165] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.909632] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.910064] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.910456] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.941733] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.941709] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.942201] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.942444] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [290.942723] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.942907] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [290.943280] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [290.943584] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [290.943858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [290.944128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [290.944393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [290.944753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [290.945312] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [290.945658] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [290.945917] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [290.946170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [290.946423] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [290.946730] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [290.947038] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [290.947304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [290.947849] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [290.948155] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [290.948417] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [290.948718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [290.948955] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [290.949189] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [290.949431] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [290.949755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1043130 num active planes 2
<7> [290.950212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [290.950624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [290.950997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [290.951363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [290.951779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [290.952480] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [290.952997] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.953400] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.953579] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [290.957480] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [290.958048] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [290.958969] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [290.974107] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [290.974674] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [290.975606] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.990835] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [290.991391] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.024612] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.025076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.025138] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.025620] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.025854] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.026551] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.026964] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.027398] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.027778] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.040845] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.041524] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.042689] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.057486] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.058196] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.059283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.074257] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.074919] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.107620] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.108074] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.108432] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.108493] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.109187] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.109869] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.110174] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.110569] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.111036] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.124042] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.124650] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.125799] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.140830] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.141473] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.142679] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.157452] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.158140] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.191635] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.191654] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.192096] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.192336] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.192533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.193075] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.193825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.194309] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.194389] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.207474] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.208243] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.209451] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.224078] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.224705] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.225857] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.240851] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.241391] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.274976] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.275698] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.275653] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.276283] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.276207] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.276772] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.277428] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.277288] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.277822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.290726] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.291239] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.292410] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.307459] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.308138] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.309354] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.324071] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.324784] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.357672] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.358313] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.358178] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.358675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.359093] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.359809] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.360255] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.360687] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.360958] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.374070] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.374747] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.375926] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.390885] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.391555] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.392777] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.407446] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.408040] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.441805] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.441678] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.442149] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.442575] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.443080] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.443500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.443881] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [291.444198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [291.444560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [291.444950] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.445245] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [291.445593] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [291.446024] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [291.446385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [291.447054] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.447441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.447767] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [291.448014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [291.448252] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [291.448522] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.448807] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [291.449043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [291.449282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [291.449534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [291.450116] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.450435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.450780] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [291.451076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [291.451331] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [291.451558] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.451841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [291.452067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [291.452293] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [291.452557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [291.452999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [291.453411] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [291.453785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [291.454130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [291.454464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [291.455084] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.455362] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.455680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.456425] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.457422] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.457930] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.458847] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.473919] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.474266] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.475033] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.490766] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.491362] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.524693] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.525012] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.525139] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.525612] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.526065] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.526757] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.527132] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.527558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.528021] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.541124] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.541905] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.543109] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.557381] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.557914] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.558977] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.574077] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.574687] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.607778] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.608387] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.608243] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.608723] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.609401] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.610140] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.610509] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.610960] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.611304] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.624055] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.624789] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.625946] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.640763] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.641406] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.642525] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.657359] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.657946] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.691663] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.691724] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.692165] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.692613] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.692603] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.693336] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.693647] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.694132] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.694526] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.707361] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.708169] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.709399] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.723971] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.724469] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.725576] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.740911] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.741592] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.774746] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.775091] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.775284] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.775745] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.776167] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.776845] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.777265] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.777713] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.778114] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.790670] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.791357] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.792490] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.807432] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.808241] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.809478] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.823974] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.824602] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.857754] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.858319] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.858252] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.858695] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.859302] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.860008] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.860366] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.860818] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.861176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.873971] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.874487] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.875627] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.890796] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.891507] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.892726] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.907469] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.908125] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.941578] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.941756] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.942182] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.942507] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.942567] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.943121] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [291.943493] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.943920] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.944195] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [291.957324] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.958112] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [291.959340] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [291.973983] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.974529] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [291.975692] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [291.990693] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [291.991494] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.024898] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.024769] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.025250] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.025650] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.025872] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.026438] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.026856] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.027257] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.027551] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.040630] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.041303] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.042439] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.057325] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.058100] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.059298] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.074159] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.074842] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.108862] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.108800] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.109517] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.110156] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.110151] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.111107] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.111774] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.112492] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.112426] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.123980] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.124616] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.125837] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.140651] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.141429] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.142623] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.157248] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.157921] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.190812] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.191270] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.191550] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.191702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.192544] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.193263] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.193627] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.194135] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.194460] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.207237] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.207821] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.208907] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.223939] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.224462] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.225543] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.240641] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.241185] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.274937] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.274826] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.275320] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.275766] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.276143] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.276834] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.277194] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.277638] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.278041] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.290590] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.291174] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.292239] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.307325] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.308128] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.309324] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.323978] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.324664] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.358151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.358834] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.359043] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.359350] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.359714] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.359942] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.360505] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.360963] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.361040] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.373984] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.374698] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.375970] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.390688] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.391504] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.392818] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.407377] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.408067] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.440838] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.441441] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.441279] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.441692] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.442386] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.442994] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.443307] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.443715] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.444085] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.457204] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.458000] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.459220] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.473930] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.474524] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.476718] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.490609] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.491449] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.524915] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.524979] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.525497] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.525903] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.525993] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.526568] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.526979] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.527440] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.527752] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.540531] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.541053] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.542077] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.557201] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.557731] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.558848] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.573930] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.574475] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.607877] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.608151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.608389] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.608842] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.609104] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.609750] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.610189] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.610599] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.610967] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.623954] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.624563] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.625720] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.640607] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.641296] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.642417] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.657151] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.657696] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.690884] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.691325] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.691581] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.691747] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.692592] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.693263] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.693665] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.694137] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.694448] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.707206] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.707910] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.709093] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.723893] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.724499] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.725696] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.740616] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.741310] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.774943] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.774896] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.775334] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.775702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.775811] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.776463] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.776769] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.777198] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.777566] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.790455] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.791012] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.792060] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.807217] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.807915] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.809085] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.823909] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.824573] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.857908] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.858152] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.858286] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.858651] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.859012] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.859576] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.859888] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.860279] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.860756] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [292.873922] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.874598] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [292.875788] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.890568] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.891210] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [292.892330] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.907199] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [292.907756] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [292.940945] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.941344] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [292.941366] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.941741] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.942369] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [292.942680] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [292.943014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [292.943293] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.943621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.943948] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.944265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [292.944830] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [292.945203] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [292.945490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [292.945750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.946104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.946365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.946628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [292.947211] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [292.947481] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [292.947723] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [292.948002] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.948267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.948530] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.948777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [292.949196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [292.949586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [292.949988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [292.950359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [292.950765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [292.951791] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.952234] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.974644] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [292.975929] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.976346] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.976725] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.977210] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.977663] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.008160] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.009082] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.009609] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.010093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.010520] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.011013] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.041295] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.042052] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.042548] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.043017] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.043452] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.043971] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.074771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.075076] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.075618] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.076152] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.076627] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.077137] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.108060] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.108077] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.108635] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.109176] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.109774] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.110476] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.141082] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.141356] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.141589] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.142053] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.142943] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.143377] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.174752] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.174972] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.175473] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.175977] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.176395] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.176822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.208144] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.208103] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.208657] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.209192] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.209775] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.210280] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.241306] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.241076] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.241579] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.242039] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.242879] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.243387] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.274100] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.274736] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.274655] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.275187] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.276495] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.276991] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.307984] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.308416] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.308514] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.309117] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.310223] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.310791] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.341134] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.341577] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.341740] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.342351] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.343659] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.344207] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.374127] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.374843] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.374674] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.375213] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.376463] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.376984] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.408119] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.408112] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.408663] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.409187] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.409718] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.410303] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.441267] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.441115] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.441659] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.442203] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.442924] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.443467] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.474144] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.474648] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.474680] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.475222] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.476258] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.476682] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.508111] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.509133] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.509725] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.510262] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.510736] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.511271] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.541297] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.541145] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.541723] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.542261] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.542727] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.543243] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.574156] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.574684] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.574722] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.575270] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.576231] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.576664] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.607964] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.608144] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.608650] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.609109] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.609537] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.609953] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.641274] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.641135] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.641702] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.642236] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.642700] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.643235] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.674162] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.674667] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.674717] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.675253] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.676067] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.676547] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.707961] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.708178] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.708734] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.709289] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.709766] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.710276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.741306] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.741181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.741732] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.742268] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.742960] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.743494] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.774196] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.774725] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.774757] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.775294] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.776433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.776869] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.807963] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.808179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.808684] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.809154] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.809571] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.810002] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.841098] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.841451] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.841803] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.842476] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.843597] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.844217] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.874219] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.874631] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.874772] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.875311] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.876275] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.876735] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.907896] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.908202] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.908754] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.909291] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.909760] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.910288] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.941295] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [293.941207] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.941765] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.942296] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.942511] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [293.942864] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [293.943258] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [293.943613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [293.944001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [293.944687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [293.945017] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [293.945421] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [293.945765] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [293.946151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 1
<7> [293.946598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [293.947031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [293.947526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [293.948001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [293.948487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [293.949516] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.949966] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.974226] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.974704] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [293.974776] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.975320] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.976498] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.977026] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.007966] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.008245] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.008792] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.009327] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.009750] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.010232] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.041264] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.041231] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.041785] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.042318] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.042950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.043623] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.074116] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.074535] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.074583] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.075021] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.076345] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.076773] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.107934] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.108248] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.108813] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.109364] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.109833] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.110375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.141312] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.142258] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.142804] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.143345] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.143815] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.144330] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.174560] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.175268] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.175820] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.176356] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.176824] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.177394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.207943] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.209238] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.209782] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.210316] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.210783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.211278] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.241268] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.242148] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.242688] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.243182] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.243652] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.244139] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.274268] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.274586] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.274823] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.275360] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.276358] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.276833] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.307263] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.307870] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.307813] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.308354] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.309524] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.309981] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.340363] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [294.340867] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [294.341359] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [294.341390] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.341809] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [294.341937] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.342279] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [294.342460] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.342866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [fastset]
<7> [294.343403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [294.343829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [294.344277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [294.344709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [294.345132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [294.345590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [294.345997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [294.346435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [294.346841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [294.347288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [294.347675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [294.348085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [294.348547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [294.348957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [294.349380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [294.349779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [294.350171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [294.350537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [294.350881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [294.351254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [294.351586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [294.351895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [294.352227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [294.352540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [294.352836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [294.353125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [294.353396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [294.353661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [294.353944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [294.354199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [294.354426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [294.354655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [294.354874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [294.355136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [294.355344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [294.355535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [294.355719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [294.355903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [294.356081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [294.356364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [294.356536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [294.356695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [294.356850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [294.357008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [294.357177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [294.357323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [294.357467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.357609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.357743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.357872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [294.358002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [294.358142] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.358265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.358385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.358505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [294.358627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [294.358747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:427] 72x72 format = XV48 little-endian (0x38345658) modifier = 0x0, visible: yes
<7> [294.358870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [294.358984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 64.000000x64.000000+4.000000+4.000000 dst: 64x64+0+0
<7> [294.359535] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.359677] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.359848] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [294.359984] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [294.360113] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [294.373339] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [294.374615] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [294.374985] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [294.378533] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [294.378586] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:427] is removed
<7> [294.378637] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [294.378752] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [294.378854] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [294.378953] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [294.379049] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [294.379190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [294.379340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [294.379484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [294.379625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [294.379761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [294.379891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [294.381270] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [294.408167] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.408466] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.408687] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [294.413526] [IGT] kms_plane: finished subtest pipe-A-plane-0, FAIL
<6> [294.413838] [IGT] kms_plane: starting dynamic subtest pipe-A-plane-3
<7> [294.413907] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [294.414207] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [294.414323] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [294.414421] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [294.414516] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update not enabled because it would inhibit pipe CRC calculation
<7> [294.414596] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [294.414688] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [294.414797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [fastset]
<7> [294.414895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [294.414993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [294.415089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [294.415208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [294.415300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [294.415389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [294.415471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [294.415550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [294.415628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [294.415704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [294.415780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [294.415855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [294.415928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [294.416002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [294.416075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [294.416159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [294.416239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [294.416318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [294.416396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [294.416481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [294.416563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [294.416634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [294.416705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [294.416775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [294.416845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [294.416915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [294.416984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [294.417054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [294.417128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [294.417204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [294.417279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [294.417354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [294.417429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [294.417500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [294.417568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [294.417639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [294.417711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [294.417783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [294.417855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [294.417926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [294.417997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [294.418067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [294.418147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [294.418225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [294.418301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [294.418376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [294.418451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.418523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.418592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.418660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [294.418727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [294.418795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.418862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.418930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [294.419002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [294.419079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [294.419421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.419518] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.423518] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [294.423626] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [294.444177] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.444464] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.444705] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.474102] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.474589] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4018), size 0 -> 4018
<7> [294.474957] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (4018 - 4051), size 0 -> 33
<7> [294.475342] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [294.475686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [294.475976] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [294.476323] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [294.476603] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.476927] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [294.477268] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [294.477533] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [294.477859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.478492] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4018), size 0 -> 4018
<7> [294.478780] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (4018 - 4051), size 0 -> 33
<7> [294.479094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [294.479447] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [294.479713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [294.479975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [294.480292] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.480562] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [294.480793] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [294.481019] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [294.481321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.481736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [294.482167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [294.482545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.482913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.483306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [294.484475] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.485190] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4018), size 0 -> 4018
<7> [294.485416] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (4018 - 4051), size 0 -> 33
<7> [294.485613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [294.485789] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [294.485989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [294.486190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [294.486367] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.486533] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [294.486689] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [294.486839] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [294.487012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.487391] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4018), size 0 -> 4018
<7> [294.487567] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (4018 - 4051), size 0 -> 33
<7> [294.487714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [294.487846] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [294.487973] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [294.488095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [294.488261] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.488381] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [294.488526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [294.488647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [294.488794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.488992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [294.489191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [294.489376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.489554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.489720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [294.492443] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.492587] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.493072] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [294.493187] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7> [294.506701] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [294.523857] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.524621] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [294.525202] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [294.525173] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.525552] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.525893] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.526310] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.526702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.540421] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [294.541204] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.557058] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [294.557836] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [294.573690] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [294.607193] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.607568] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.607882] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.608232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.608589] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.623677] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [294.633318] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4040), size 4018 -> 4040
<7> [294.633495] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> (4040 - 4051), size 33 -> 11
<7> [294.633651] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.633803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [294.633957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [294.634134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [294.634367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1738550 num active planes 2
<7> [294.634613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [294.634827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [294.635038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [294.635308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [294.635520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [294.674550] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.692465] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.693055] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.693593] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4040) -> ( 0 - 4039), size 4040 -> 4039
<7> [294.693600] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.693944] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4040 - 4051) -> (4039 - 4051), size 11 -> 12
<7> [294.694428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [294.694884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [294.695276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [294.695662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [294.695987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [294.696483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [294.697601] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.697871] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.724092] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [294.725322] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.725871] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.726415] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.742765] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [294.743357] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [294.743680] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.743977] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [294.744365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [294.744686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [294.745000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.745459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [294.745899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [294.746460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.746826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.747221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [294.748125] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.748464] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.774299] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.774218] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.774635] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.774991] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.793077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.793454] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.824224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.824929] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [294.824732] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.825243] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.840656] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [294.840900] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [294.841097] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.841460] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [294.841645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [294.841804] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [294.841987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [294.842316] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [294.842465] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [294.842603] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.842735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [294.842858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [294.842979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [294.843107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [294.843379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [294.843558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [294.843722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [294.843884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [294.844040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [294.844545] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.844709] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.874233] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.874670] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.874855] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.875073] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.889253] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [294.889511] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [294.889713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.889893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [294.890072] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [294.890323] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [294.890530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.890859] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [294.891015] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [294.891158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [294.891364] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [294.891496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [294.891617] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [294.891742] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [294.891925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [294.892097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [294.892351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.892512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [294.892688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [294.893197] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.893354] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.924261] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.924820] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [294.924873] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.925470] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.940303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.940610] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [294.974263] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.974681] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [294.974846] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.975355] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [294.993495] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [294.993841] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.024294] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.024838] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.025338] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.025805] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.026322] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.041058] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.057293] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.057747] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.058114] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.059052] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4033) -> ( 0 - 4040), size 4033 -> 4040
<7> [295.059372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4033 - 4051) -> (4040 - 4051), size 18 -> 11
<7> [295.059613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.059834] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [295.060047] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [295.060327] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [295.060582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1738550 num active planes 2
<7> [295.060875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [295.061128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [295.061412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [295.061639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [295.061850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [295.062626] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.062834] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.107511] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.124290] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.124820] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.125327] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.127342] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4040) -> ( 0 - 4039), size 4040 -> 4039
<7> [295.127716] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4040 - 4051) -> (4039 - 4051), size 11 -> 12
<7> [295.128079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [295.128609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [295.129027] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [295.129471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.129866] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.130270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [295.131668] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.132093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.157634] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.157401] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.157941] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.158476] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.174533] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [295.174831] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [295.175074] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.175511] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [295.175734] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [295.175936] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [295.176206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.176522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [295.176773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [295.177018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.177256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.177521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [295.178159] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.178411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.207390] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.207283] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.207723] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.208116] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.227473] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.227748] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.257298] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.257796] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.258063] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.258272] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.273304] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [295.273567] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [295.273779] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.273974] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [295.274158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [295.274429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [295.274645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [295.274900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [295.275130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [295.275377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.275629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.275847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [295.276444] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.276652] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.307321] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.307850] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.308058] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.308307] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.323377] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [295.323629] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [295.323828] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.324014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [295.324184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [295.324477] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [295.324662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.324903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [295.325114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [295.325337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.325536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.325723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [295.326393] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.326581] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.357326] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.357865] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.358162] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.358413] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.374750] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.375147] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.407922] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.408348] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.408944] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.409455] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.425809] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.426224] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.457339] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.457891] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.458408] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.458907] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.459417] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.474358] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.475553] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4033) -> ( 0 - 4020), size 4033 -> 4020
<7> [295.475919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4033 - 4051) -> (4020 - 4051), size 18 -> 31
<7> [295.476247] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [295.476660] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [295.476976] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [295.477345] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [295.477703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1738550 num active planes 2
<7> [295.478153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [295.478633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [295.479062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [295.479541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [295.480000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [295.507455] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.508006] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.508526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.508956] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.509618] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.524267] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.525254] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4020) -> ( 0 - 4019), size 4020 -> 4019
<7> [295.525682] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4020 - 4051) -> (4019 - 4051), size 31 -> 32
<7> [295.525991] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [295.526283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [295.526645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [295.526931] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [295.527434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [295.528131] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4020) -> ( 0 - 4019), size 4020 -> 4019
<7> [295.528510] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4020 - 4051) -> (4019 - 4051), size 31 -> 32
<7> [295.528803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [295.529078] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [295.529437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [295.529701] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [295.529967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [295.530375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [295.530807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [295.531234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.531687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.532046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [295.557180] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.557906] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [295.558262] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [295.558724] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.558717] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.559054] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [295.559338] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.559645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [295.559826] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.559954] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [295.560309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.560956] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [295.561266] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [295.561606] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.561867] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [295.562118] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [295.562430] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [295.562696] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.563178] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [295.563445] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [295.563662] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.563860] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [295.564062] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [295.564267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [295.564539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.564844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [295.565140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [295.565452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.565719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.565963] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [295.566689] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.566935] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.590716] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.591336] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.591748] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.592110] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.596558] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.597032] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.624354] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.624598] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.624813] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.625228] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.625466] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4019), size 4018 -> 4019
<7> [295.625882] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> (4019 - 4051), size 33 -> 32
<7> [295.626227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [295.626594] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [295.626877] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [295.627174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [295.627541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [295.627952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [295.628359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [295.628780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.629158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.629591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [295.630699] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.631101] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.657766] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.658461] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.658738] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [295.658881] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.659027] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [295.659233] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.659285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.659643] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [295.659902] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [295.660190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [295.660581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.660954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [295.661335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [295.661696] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.662044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.662415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [295.663470] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.663872] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.691098] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.691499] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.692042] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.692542] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.693154] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.693691] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.724551] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [295.725466] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.725964] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.726439] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.726913] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.727443] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.757543] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.758113] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.758654] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.759126] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.759639] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.774130] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.775175] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4020), size 4018 -> 4020
<7> [295.775553] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> (4020 - 4051), size 33 -> 31
<7> [295.775865] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [295.776160] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [295.776490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [295.776768] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [295.777135] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1738550 num active planes 2
<7> [295.777637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [295.778041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [295.778513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [295.778907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [295.779286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [295.807517] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.808147] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.808723] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.809191] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.809726] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.824151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.824916] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4020) -> ( 0 - 4019), size 4020 -> 4019
<7> [295.825209] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4020 - 4051) -> (4019 - 4051), size 31 -> 32
<7> [295.825541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [295.825805] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [295.826063] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [295.826370] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [295.826681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [295.827139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [295.827577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [295.827993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.828386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [295.828800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [295.857217] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.857411] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.857915] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.858158] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [295.858383] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.858590] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [295.858938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [295.859260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [295.859753] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [295.860078] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [295.860449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [295.860902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [295.861360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [295.861802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.862190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [295.862667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [295.863584] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.863999] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.890499] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.890399] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.890944] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.891385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.891859] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.892512] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.923799] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.924517] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.925047] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.925498] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.925934] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.926397] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.957085] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [295.957546] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.958118] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.958659] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.963051] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.963518] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [295.990545] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [295.990518] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [295.991023] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [295.991487] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [295.994344] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [295.994890] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.023822] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.024454] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.024957] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.025424] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.027707] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.028167] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.057027] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.057547] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.058046] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.058515] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.060970] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.061481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.090528] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.090941] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.090994] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.091421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.091700] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4019), size 4018 -> 4019
<7> [296.092013] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> (4019 - 4051), size 33 -> 32
<7> [296.092316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [296.092682] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [296.092967] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [296.093301] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [296.093719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [296.094286] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4019), size 4018 -> 4019
<7> [296.094617] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> (4019 - 4051), size 33 -> 32
<7> [296.094883] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [296.095140] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [296.095407] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [296.095703] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [296.095971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [296.096500] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4019), size 4018 -> 4019
<7> [296.096773] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> (4019 - 4051), size 33 -> 32
<7> [296.097064] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [296.097314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [296.097637] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [296.097870] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [296.098111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2086260 num active planes 2
<7> [296.098528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [296.098926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [296.099299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [296.099744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [296.100125] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [296.101062] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.101449] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.124141] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.124441] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.124846] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.125199] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.125615] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.126073] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.157708] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.157567] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.158068] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.158526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.159024] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.159502] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.190563] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.190970] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.191076] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.191541] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.192234] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.192808] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.224357] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.224462] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.225011] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.225505] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.225956] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.226381] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.257712] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.257483] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.258034] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.258531] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.259040] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.259484] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.290594] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.290910] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.291101] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.291560] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.292200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.292675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.323573] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.324280] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.324121] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.324621] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.325601] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.326021] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.357664] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.357604] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.358104] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.358576] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.358995] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.359405] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.390589] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.390878] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.391089] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.391548] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.392234] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.392676] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.423555] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.424159] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.424061] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.424520] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.425467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.425903] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.457650] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.457530] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.458088] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.458593] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.459086] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.459580] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.490601] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.490874] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.491104] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.491571] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.492172] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.492643] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.523630] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.524323] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.524183] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.524726] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.525861] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.526314] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.557598] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.557646] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.558202] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.558702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.559134] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.559609] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.590836] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.590626] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.591134] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.591597] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.592134] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.592585] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.623619] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.624080] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.624124] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.624621] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.625339] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.625795] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.657372] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.657541] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.658035] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.658539] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.659052] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.659518] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.690637] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.690930] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.691145] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.691604] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.692264] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.692739] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.723657] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.724308] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.724215] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.724756] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.725736] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.726210] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.757651] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.757621] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.758173] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.758695] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.759158] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.759632] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.790893] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.790657] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.791211] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.791744] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.792272] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.792727] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.823655] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.824069] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.824205] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.824734] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.825417] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.825861] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.857611] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.857572] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.858124] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.858673] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.859132] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.859648] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.890907] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.890679] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.891237] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.891769] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.892039] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [296.892390] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [296.892791] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [296.893108] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [296.893423] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [296.893871] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [296.894283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781680 num active planes 2
<7> [296.894793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [296.895234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [296.895673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [296.896079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [296.896463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [296.897445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.897901] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.923650] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.924007] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.924077] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.924449] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.925506] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.926035] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.957645] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [296.957607] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.958159] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.958659] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.959392] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.959944] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [296.990810] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [296.990593] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [296.991141] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [296.991648] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [296.992425] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [296.992899] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.018591] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD off
<7> [297.019015] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [297.023693] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.024126] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.024248] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.024779] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.025808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.026225] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.057658] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.057706] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.058258] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.058790] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.059370] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.059920] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.090951] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.090713] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.091263] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.091802] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.092564] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.092998] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.123707] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.124170] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.124266] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.124801] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.125869] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.126340] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.157582] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.157710] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.158264] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.158796] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.159321] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.159822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.190835] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.190745] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.191296] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.191838] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.192466] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.193006] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.223712] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.224141] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.224268] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.224807] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.225853] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.226322] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.257363] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.257753] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.258310] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.258849] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.259325] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.259830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.290747] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.290628] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.291099] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.291539] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.292377] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.292869] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.323724] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.324218] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.324287] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.324823] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.325984] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.326421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.357549] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.357760] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.358305] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.358849] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.359312] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.359834] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.390711] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.390734] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.391182] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.391587] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.392133] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.392577] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.423779] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.424198] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.424322] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.424834] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.425733] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.426191] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.456765] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.457393] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.457209] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.457664] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.459485] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.459929] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.490803] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.490776] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.491268] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.491719] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.492136] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.492566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.523747] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.524038] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.524286] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.524861] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.525391] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.525906] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.556784] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.557461] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.557285] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.557822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.558868] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.559320] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.590795] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.590790] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.591330] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.591888] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.592353] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.592851] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.623750] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.624074] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.624292] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.624798] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.625477] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.625919] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.656804] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.657470] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.657335] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.657796] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.658720] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.659141] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.690841] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.690813] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.691351] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.691879] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.692471] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.692975] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.723821] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.723819] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.724313] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.724825] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.725364] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.725851] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.756705] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.757458] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.757249] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.757737] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.759074] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.759512] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.790689] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.790821] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.791324] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.791833] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.792296] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.792807] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.824096] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [297.823859] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.824399] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.824935] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.825658] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.826196] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.856832] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.857332] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [297.857323] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.857803] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.858779] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.859190] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.889716] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [297.890119] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [297.890488] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [297.890966] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [297.891082] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [297.891388] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [297.891569] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [297.891893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [fastset]
<7> [297.892054] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [297.892287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [297.892709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [297.893134] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [297.893509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [297.893921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [297.894301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [297.894663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [297.895083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [297.895475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [297.895861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [297.896209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [297.896613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [297.897017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [297.897364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [297.897724] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [297.898104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [297.898441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [297.898801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [297.899141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [297.899481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [297.899851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [297.900188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [297.900524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [297.900911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [297.901263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [297.901568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [297.901910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [297.902189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [297.902466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [297.902786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [297.903038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [297.903300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [297.903590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [297.903864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [297.904090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [297.904310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [297.904571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [297.904817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [297.905012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [297.905204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [297.905396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [297.905594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [297.905821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [297.905992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [297.906161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [297.906323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [297.906481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [297.906634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [297.906809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [297.906980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [297.907154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [297.907296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [297.907454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [297.907601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [297.907752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [297.907879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [297.908006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:428] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [297.908132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [297.908252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [297.908374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [FB:431] 72x72 format = XV30 little-endian (0x30335658) modifier = 0x0, visible: yes
<7> [297.908495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [297.908608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 64.000000x64.000000+4.000000+4.000000 dst: 64x64+0+0
<7> [297.909099] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [297.909237] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [297.909426] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [297.909550] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [297.909690] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [297.922791] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:33:plane 1A]
<7> [297.939487] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [297.941179] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [297.941535] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [297.945659] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [297.945776] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:431] is removed
<7> [297.945887] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4018) -> ( 0 - 4051), size 4018 -> 4051
<7> [297.946181] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (4018 - 4051) -> ( 0 - 0), size 33 -> 0
<7> [297.946454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [297.946740] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [297.946982] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [297.947268] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [297.947555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [297.947928] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [297.948252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [297.948570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [297.948896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [297.949186] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<6> [297.957253] [IGT] kms_plane: finished subtest pipe-A-plane-3, SUCCESS
<6> [297.958118] [IGT] kms_plane: starting dynamic subtest pipe-A-plane-5
<6> [297.958586] [IGT] kms_plane: finished subtest pipe-A-plane-5, SUCCESS
<7> [297.973238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [297.973397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [297.973505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [297.973605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [297.973745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [297.973848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [297.973959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [297.974056] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [297.974142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [297.974224] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [297.974305] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [297.974386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [297.974466] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [297.974544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [297.974621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [297.974712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [297.974801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [297.974888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [297.974974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [297.975053] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [297.975129] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [297.975204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [297.975279] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [297.975354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [297.975427] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [297.975500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [297.975574] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [297.975649] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [297.975735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [297.975814] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [297.975891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [297.975967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [297.976040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [297.976115] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [297.976190] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [297.976264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [297.976341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [297.976415] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [297.976487] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [297.976558] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0
<7> [297.976726] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [297.976825] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [297.976921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [297.977008] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [297.977081] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [297.977154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [297.977226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [297.977296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [297.977367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [297.977439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [297.977512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [297.977583] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [297.977654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [297.977738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [297.977814] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [297.977896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [297.977981] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [297.978059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [297.978137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [297.978205] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [297.978272] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [297.978339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [297.978412] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [297.978483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [297.978553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [297.978621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [297.978693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [297.978765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [297.978838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [297.978912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [297.978989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [297.979062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [297.979131] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [297.979201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [297.979268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [297.979337] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [297.979405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [297.979475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [297.979547] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [297.979618] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0
<7> [297.979714] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [297.979794] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [297.979892] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [297.979973] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [297.980043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [297.980099] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [297.980152] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [297.980207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [297.980272] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [297.980356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [297.980445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [297.980528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [297.980608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [297.980691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [297.980775] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz
<7> [297.980881] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43464 kHz -> 0 kHz
<7> [297.980966] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [297.981042] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [297.981115] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [297.981203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]
<7> [297.981282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [297.981360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [297.981437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [297.981515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [297.981592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [297.981668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [297.981804] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [298.022848] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [298.023130] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [298.226931] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [298.227443] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [298.248664] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [298.249181] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [298.249583] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [298.301573] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [298.302131] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [298.309848] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [298.310338] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]
<7> [298.310390] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [298.311791] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [298.312310] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [298.312884] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [298.313286] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [298.313623] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [298.313989] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [298.314343] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [298.314657] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [298.315013] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [298.315321] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [298.315604] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [298.315909] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [298.316227] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [298.316521] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [298.316838] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [298.317141] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [298.317536] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [298.317868] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [298.318128] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [298.318623] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [298.319177] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [298.319533] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [298.320016] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [298.320377] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [298.322133] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:428] from all active usage due to RMFB ioctl
<7> [298.331473] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:428]
<7> [298.334479] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [298.334914] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [298.335235] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [298.335546] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [298.335871] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [298.336204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [298.336472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [298.336721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [298.337036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [298.337267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [298.337497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [298.337710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [298.337947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [298.338157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [298.338355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [298.338416] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [298.338549] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [298.338652] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [298.338737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [298.338807] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [298.338794] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [298.338943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [298.338982] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [298.339047] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [298.339145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [298.339255] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [298.339321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [298.339469] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [298.339495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [298.339655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [298.339838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [298.340019] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [298.340181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [298.340322] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [298.340459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [298.340613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [298.340760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [298.340888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [298.341014] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [298.341134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [298.341252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [298.341368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [298.341484] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [298.341597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [298.341705] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [298.341842] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [298.341967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [298.342075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dpll_hw_state
<7> [298.342175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [298.342273] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [298.342373] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0
<7> [298.342470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [298.342564] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [298.342658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000
<7> [298.342755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000
<7> [298.342845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000
<7> [298.342936] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000
<7> [298.343028] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000
<7> [298.343117] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000
<7> [298.343205] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000
<7> [298.343293] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000
<7> [298.343380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000
<7> [298.343466] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000
<7> [298.343547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [298.343628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [298.343708] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [298.343818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [298.343911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [298.344002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [298.344085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [298.344157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [298.344229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [298.344300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [298.344371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [298.344442] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [298.344512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [298.344580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [298.344647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [298.344714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [298.344802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [298.344892] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [298.345038] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [298.345110] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x2
<7> [298.345180] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [298.345244] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [298.345308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [298.345366] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [298.345419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [298.345471] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [298.345540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [298.345629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [298.345708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [298.345807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [298.345908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [298.346008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [298.346101] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz
<7> [298.346198] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [298.346276] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [298.346353] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [298.346428] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [298.346526] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0
<7> [298.346599] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0
<7> [298.346674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]
<7> [298.346761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [298.346848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [298.346932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [298.347014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [298.347094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [298.347169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [298.347243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [298.347316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [298.347389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [298.347461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [298.347532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [298.347605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [298.347676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [298.347751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [298.347828] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [298.347905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [298.347982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [298.348058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [298.348133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [298.348203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [298.348272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [298.348342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [298.348413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [298.348485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [298.348560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [298.348634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [298.348707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [298.348809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [298.348889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [298.348968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [298.349045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [298.349119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [298.349189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [298.349258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [298.349333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [298.349412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [298.349488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [298.349556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [298.349624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [298.349693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [298.349767] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [298.349843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [298.349918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [298.349992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [298.350067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [298.350138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [298.350206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [298.350274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [298.350340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [298.350408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [298.350478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [298.350549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [298.350620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [298.350690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [298.350764] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [298.350840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [298.350916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:428] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [298.350994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [298.351070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [298.351143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [298.351213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [298.351281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [298.351350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [298.351423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [298.353823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [298.353928] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [298.354181] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [298.354319] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [298.354465] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [298.354607] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [298.354697] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [298.354792] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [298.354884] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [298.354955] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [298.355024] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [298.355091] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [298.355151] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [298.355210] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [298.355270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [298.355328] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [298.355386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [298.355444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [298.355511] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [298.355574] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [298.355633] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [298.355691] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1]
<7> [298.355756] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2]
<7> [298.355820] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3]
<7> [298.355904] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [298.356065] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [298.356124] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [298.356227] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [298.357553] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B]
<7> [298.357665] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [298.359961] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [298.360060] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (451 ms remaining)
<7> [298.819151] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [298.880293] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [298.880688] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [298.881104] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [298.917246] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [298.917717] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [298.918089] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [298.918608] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [299.091640] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [299.092174] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [299.092582] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [299.094825] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [299.096205] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [299.097230] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [299.098509] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [299.099800] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [299.101182] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [299.101612] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [299.103208] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [299.103575] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [299.104444] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [299.105048] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [299.105512] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B
<7> [299.105963] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [299.121975] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [299.123912] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [299.124430] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [299.128315] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<6> [299.139810] [IGT] kms_plane: starting dynamic subtest pipe-B-plane-0
<7> [299.140341] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<7> [299.141251] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [299.141851] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [299.142408] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [299.142834] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update not enabled because it would inhibit pipe CRC calculation
<7> [299.143266] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [299.143729] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [299.144331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [fastset]
<7> [299.144757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [299.145206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [299.145600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [299.145945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [299.146327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [299.146643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [299.146964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [299.147267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [299.147540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [299.147837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [299.148124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [299.148375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [299.148618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [299.148846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [299.149251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [299.149470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [299.149705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [299.149933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [299.150125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [299.150306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [299.150487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [299.150672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [299.150902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [299.151083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [299.151248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [299.151408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [299.151562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [299.151718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [299.151952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [299.152094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [299.152228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [299.152362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [299.152495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [299.152621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [299.152743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [299.152860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [299.152999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [299.153110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [299.153221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [299.153329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [299.153436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [299.153543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [299.153657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [299.153774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [299.153892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [299.153989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [299.154083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [299.154174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [299.154264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [299.154355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [299.154444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [299.154533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [299.154617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [299.154699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [299.154789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [299.154898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [299.154987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:428] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [299.155071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [299.155150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [299.155499] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [299.196922] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [299.197470] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:152:plane 1B]
<7> [299.205130] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [299.206866] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [299.207547] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [299.228972] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.229461] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.229971] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.256016] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.256398] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.256823] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [299.257313] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [299.257675] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [299.259068] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.259790] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.260239] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [299.260578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [299.260989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [299.261883] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.262398] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.306007] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [299.306032] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.306641] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.307021] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [299.307129] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.307719] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [299.307559] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.308142] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.322229] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [299.322893] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.338847] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [299.339559] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [299.355476] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [299.389106] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.389651] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.390191] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.390664] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.391255] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.406241] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.423983] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.424558] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.425076] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.425763] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.426195] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.426548] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [299.426896] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [299.427504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 347710 num active planes 1
<7> [299.427983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [299.428477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [299.428941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [299.429371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [299.429845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [299.431536] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.431964] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.438407] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:152:plane 1B]
<7> [299.489676] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.507011] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.507528] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.507994] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.508265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [299.508694] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [299.509105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [299.509456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [299.509773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [299.510286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [299.511320] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.511591] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.512178] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 131072 bytes of contiguous stolen space for FBC, limit: 2
<7> [299.512394] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:152:plane 1B]
<7> [299.539248] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.540125] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.540792] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.541520] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.557010] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.557276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.557504] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [299.557746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [299.558014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [299.558307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [299.558553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [299.558785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [299.559209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [299.559421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [299.560090] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.560289] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.605931] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.606126] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.606722] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.607323] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.627355] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.627645] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.638364] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:152:plane 1B]
<7> [299.672717] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.673030] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.673597] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.674096] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.691230] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.691540] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.691787] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [299.692305] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [299.692557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [299.692948] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.693200] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.693394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [299.693607] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [299.693805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [299.694069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [299.694298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [299.694516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [299.694723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [299.694931] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [299.695190] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43464 kHz
<7> [299.695707] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.695900] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.723142] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.723158] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.723704] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.724235] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.740405] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.740670] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.740881] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [299.741165] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [299.741383] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [299.741729] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.741909] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.742274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [299.742429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [299.742618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [299.742850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [299.743062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [299.743254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [299.743444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [299.743652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [299.744228] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.744422] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.773208] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.773145] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.773675] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.774213] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.800001] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.800373] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 1354), size 4051 -> 1354
<7> [299.800632] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1354 - 4051), size 0 -> 2697
<7> [299.800887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.801202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.801481] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [299.801727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [299.802043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1043130 num active planes 2
<7> [299.802628] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.802978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 1354), size 4051 -> 1354
<7> [299.803426] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1354 - 4051), size 0 -> 2697
<7> [299.803712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.803959] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.804314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [299.804617] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [299.804900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1043130 num active planes 2
<7> [299.805523] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.805824] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 1354), size 4051 -> 1354
<7> [299.806104] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1354 - 4051), size 0 -> 2697
<7> [299.806345] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [299.806592] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [299.806832] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [299.807108] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [299.807359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1043130 num active planes 2
<7> [299.807744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [299.808148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [299.808614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [299.809062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [299.809468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [299.810706] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [299.811133] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.811602] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.812152] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [299.824759] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.825195] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [299.825980] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.839282] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.839769] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [299.840494] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.855217] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.855701] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [299.889057] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.889606] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.889861] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.890129] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [299.908382] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.908685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [299.908981] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [299.909255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [299.909471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [299.909671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [299.909862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [299.910378] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [299.910566] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [299.910776] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [299.911104] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [299.921780] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.922301] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [299.922826] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.938441] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.938904] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [299.939646] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [299.955389] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [299.955956] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [299.989075] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [299.989892] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [299.989664] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [299.990257] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.006831] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1354) -> ( 0 - 4051), size 1354 -> 4051
<7> [300.007150] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1354 - 4051) -> ( 0 - 0), size 2697 -> 0
<7> [300.007349] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.007535] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.007704] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [300.007896] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [300.008097] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [300.008247] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.008393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.008536] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.008705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [300.009010] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1354) -> ( 0 - 4051), size 1354 -> 4051
<7> [300.009196] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1354 - 4051) -> ( 0 - 0), size 2697 -> 0
<7> [300.009317] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.009432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.009548] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [300.009656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [300.009766] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [300.009890] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.010015] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.010268] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.010397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [300.010619] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1354) -> ( 0 - 4051), size 1354 -> 4051
<7> [300.010722] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1354 - 4051) -> ( 0 - 0), size 2697 -> 0
<7> [300.010818] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.010911] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.011002] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [300.011118] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [300.011206] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [300.011291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.011375] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.011458] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.011541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [300.011671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [300.011796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [300.011937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [300.012093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [300.012214] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [300.012697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.012840] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.039060] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.039343] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [300.039368] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.039650] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.052304] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.052603] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.072083] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.072492] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.072847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.073019] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.088332] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.088630] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.122211] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.123025] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [300.122837] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.123432] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.141206] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.141491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.141721] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [300.141932] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [300.142358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [300.142640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [300.142895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [300.143159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [300.143394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [300.143620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [300.144287] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.144507] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.172234] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.172824] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.173359] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.173831] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.174478] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.189415] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.205628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.205873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.206111] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [300.206138] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.206309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [300.206456] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.206529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 347710 num active planes 1
<7> [300.206717] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.206835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [300.207078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [300.207305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [300.207522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [300.207722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [300.208598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.208791] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.239115] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.239620] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.240038] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.240581] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.241109] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.256176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.272102] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.272133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [300.272382] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.272443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [300.272621] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.272718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [300.272980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [300.273252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [300.273489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [300.274387] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.274610] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.275105] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 131072 bytes of contiguous stolen space for FBC, limit: 2
<7> [300.275278] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:152:plane 1B]
<7> [300.305788] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.306158] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.306883] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.307504] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.320626] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.320877] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.321106] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [300.321299] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [300.321513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [300.321796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [300.322030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [300.322402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [300.322666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [300.322869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [300.323547] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.323749] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.372131] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.372540] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.372676] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.373176] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.393149] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.393454] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.404912] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:152:plane 1B]
<7> [300.439238] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.439278] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.439840] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.440381] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.460122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.460491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.460775] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [300.461049] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [300.461417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [300.461825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [300.462167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [300.462456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [300.462723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [300.463029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [300.463826] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.464076] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.489162] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.489771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.489736] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.490259] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.510330] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.510702] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.511018] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [300.511778] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [300.512076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [300.512502] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [300.512815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [300.513128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [300.513407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [300.513680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [300.514521] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.514786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.539828] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.540173] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.540787] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.541323] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.561057] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.561918] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 1354), size 4051 -> 1354
<7> [300.562326] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1354 - 4051), size 0 -> 2697
<7> [300.562635] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.562933] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.563252] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [300.563511] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [300.563858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1043130 num active planes 2
<7> [300.564231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [300.564569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [300.564886] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [300.565252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [300.565575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [300.566340] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [300.566606] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.566914] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.567382] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [300.588822] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.589763] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [300.591026] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.605010] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.605361] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [300.605961] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.621864] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.622573] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [300.656737] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.657165] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.657703] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.658178] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.675082] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.675409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [300.675571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [300.675704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [300.675833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [300.675956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [300.676077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [300.676675] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [300.676911] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.677058] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.677433] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [300.688475] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.688870] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [300.689469] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.705120] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.705678] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [300.706607] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.721770] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [300.722383] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [300.756688] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.757184] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.757770] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.758291] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.773640] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1354) -> ( 0 - 4051), size 1354 -> 4051
<7> [300.773863] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1354 - 4051) -> ( 0 - 0), size 2697 -> 0
<7> [300.773971] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.774064] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.774215] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21
<7> [300.774308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22
<7> [300.774396] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [300.774480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.774561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.774638] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.774753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [300.774888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [300.775014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [300.775136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [300.775266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [300.775387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [300.776016] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.776166] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.806653] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.807232] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.807771] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.808270] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.829699] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.830076] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.856215] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [300.857226] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.857745] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.858194] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.881572] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.882014] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.906461] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.907213] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [300.907810] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [300.908312] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [300.927468] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.927894] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.928313] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [300.928655] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [300.929067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [300.929746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.930065] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [300.930436] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 21, 4, 21 -> 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25
<7> [300.930760] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 22, 7, 22 -> 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26
<7> [300.931076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [300.931580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [300.932019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [300.932488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [300.932969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [300.933435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [300.934589] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [300.934950] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [300.972445] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [300.973457] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [300.973760] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [300.974022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 6, 18, 18, 18, 18, 18, 0, 0, 25, 6, 25 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [300.974373] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 11, 26, 26, 26, 26, 26, 0, 0, 26, 11, 26 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [300.974673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 347710 num active planes 1
<7> [300.975050] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [300.975455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [300.975854] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [300.976265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [300.976741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [301.022451] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.023163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.023617] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [301.023940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [301.024290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [301.024697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [301.025121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [301.025575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [301.025974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [301.026451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [301.026859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [301.028740] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 524288 bytes of contiguous stolen space for FBC, limit: 2
<7> [301.029094] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:152:plane 1B]
<7> [301.055404] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.056046] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.056368] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [301.056373] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.056596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [301.056774] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.056826] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [301.057059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [301.057085] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.057386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [301.057659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [301.057919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [301.058177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [301.058505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [301.059307] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.059620] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.105799] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.106265] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.106759] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.107175] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.111942] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.112464] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.121460] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:152:plane 1B]
<7> [301.155375] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.155771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.155906] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.156376] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.157147] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.157558] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [301.157863] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [301.158200] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [301.158597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [301.159007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [301.159462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [301.159895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [301.160303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [301.160723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [301.161819] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.162240] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.189381] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.189367] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.189784] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.190090] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.190136] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.190453] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [301.190740] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [301.191051] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [301.191434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [301.191818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [301.192183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [301.192595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [301.192994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [301.193364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [301.194355] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.194725] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.222376] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.222706] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.222765] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.223090] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.223381] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.223684] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [301.223913] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [301.224124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.224381] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [301.224598] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [301.224851] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [301.225099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1043130 num active planes 2
<7> [301.225475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [301.225805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [301.226128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [301.226562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [301.226944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [301.227876] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [301.228337] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.228739] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.229209] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [301.238418] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.239282] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [301.240546] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.255030] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.255780] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [301.257027] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.271705] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.272718] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [301.305285] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.305738] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.306229] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.306155] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.308915] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.309325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.309640] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [301.309927] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [301.310290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [301.310575] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.310842] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [301.311105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [301.311419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [301.311774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [301.312195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [301.312669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [301.313066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [301.313484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [301.313893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [301.314920] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [301.315351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.315769] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.316363] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [301.321672] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.322510] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [301.323622] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.338419] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.339493] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [301.340844] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.354975] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [301.355701] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [301.389297] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.389294] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.389716] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.390102] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.390337] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [301.390653] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [301.390943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [301.391228] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [301.391585] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [301.391871] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [301.392186] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [301.392648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [301.393064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [301.393500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [301.393899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [301.394332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [301.395493] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.395908] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.422704] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.423399] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.423849] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.424232] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.424735] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.425212] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.455397] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.455922] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.455848] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.456202] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.457413] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.457817] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.489142] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.489423] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.489780] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.490016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.490085] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.490246] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [301.490544] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [301.490771] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [301.491039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [301.491408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [301.491756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [301.492082] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [301.492450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [301.492846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [301.493873] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.494299] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.522427] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.522918] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.523346] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.527542] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.529351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.529818] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.556263] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.556449] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.557002] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.557545] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.558324] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.558845] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.589528] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.589437] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.589975] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.590428] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.591351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.591842] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.622617] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.622442] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.622932] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.623385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.624346] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.624767] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.655446] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.655809] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [301.655855] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.656209] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.657264] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.657730] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.705416] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [301.706214] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.706570] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [301.706825] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [301.707121] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [301.707553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 347710 num active planes 1
<7> [301.707927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 366 qgv_peak_bw: 38400
<7> [301.708296] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 366 qgv_peak_bw: 38400
<7> [301.708756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [301.709158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 366 qgv_peak_bw: 38400
<7> [301.709593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 366
<7> [301.755400] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD off
<7> [301.755718] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [301.756070] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.756637] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.756904] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [301.757162] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [301.757537] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [301.757849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [301.758235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [301.758658] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [301.759102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [301.759527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [301.759902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [301.761681] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 32768 bytes of contiguous stolen space for FBC, limit: 2
<7> [301.762000] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:152:plane 1B]
<7> [301.788616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [301.789498] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.789590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [301.789936] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [301.789999] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.790245] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [301.790469] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.790634] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [301.790994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [301.791471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [301.791905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [301.792297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [301.792752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [301.793154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [301.794168] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.794615] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.838739] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.839494] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.840017] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.840490] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.840921] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.841563] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.888653] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [301.889492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.889980] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.890449] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.890875] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.891369] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.938833] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [301.939531] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.940043] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.940514] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.945168] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.945751] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [301.954647] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:152:plane 1B]
<7> [301.988714] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [301.989515] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [301.990058] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [301.990592] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [301.992704] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [301.993216] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.022064] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.022538] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.023080] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.023590] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.026026] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.026541] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.055222] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.055525] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.056026] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.056502] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.059052] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.059504] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.088553] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.088523] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.088972] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.089416] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.089808] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [302.090110] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [302.090430] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [302.090723] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [302.091061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [302.091489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [302.091925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [302.092311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [302.092795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [302.093237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [302.094290] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.094736] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.122028] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.122551] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.123095] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.123635] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.124100] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.124684] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.155136] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.155530] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.155986] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.156484] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.156909] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.157363] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.188627] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.188555] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.189048] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.189505] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.190347] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.190848] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.222477] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.222543] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.223088] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.223283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [302.223623] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.223709] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [302.224036] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [302.224422] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [302.224793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 695420 num active planes 1
<7> [302.225250] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400
<7> [302.225756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400
<7> [302.226231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [302.226700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400
<7> [302.227136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731
<7> [302.228187] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.228675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.255560] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.255866] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.256105] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.256617] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.257260] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.257798] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.288586] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.289050] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.289036] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.289477] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.290336] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.290847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.322545] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.322567] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.323053] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.323504] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.323935] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.324387] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.355701] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.355570] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.356063] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.356539] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.357003] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.357673] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.388601] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.389117] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.389148] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.389685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.390627] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.391095] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.422382] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.422535] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.422988] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.423375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.423877] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.424315] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.455685] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.455566] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.456106] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.456657] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.457077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.457531] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.488585] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.489102] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.489081] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.489573] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.490503] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.490981] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.522382] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.522598] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.523086] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.523557] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.523988] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.524414] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.555603] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.555999] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.556148] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.556692] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.557633] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.558115] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.588610] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.588895] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.589033] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.589394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.590022] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.590418] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.622189] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.622492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.622802] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.623125] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.623363] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.623614] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.655104] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.688631] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.688923] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.689116] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.689546] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.690206] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.690756] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.722304] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.722645] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.723108] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.723509] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.723903] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.724316] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.755659] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.755583] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.756037] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.756454] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.756958] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.757386] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.788644] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.788900] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.789096] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.789546] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.790084] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.790565] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.822285] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.822658] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.823201] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.823683] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.824113] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.824556] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.855555] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.855631] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.856044] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.856406] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.856853] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.857231] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.888828] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.888650] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.889059] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.889413] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.889896] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.890266] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.922278] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.922681] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.923121] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.923559] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.923988] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.924392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.955625] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [302.955658] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.956145] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.956625] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.957086] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.957589] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [302.988804] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [302.988666] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [302.989077] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [302.989437] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [302.989882] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [302.990263] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.022234] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.022662] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.022848] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.023045] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.023137] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 1361), size 4051 -> 1361
<7> [303.023374] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.023417] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1361 - 4051), size 0 -> 2690
<7> [303.023708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [303.023943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [303.024175] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [303.024425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [303.024779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1043130 num active planes 2
<7> [303.025198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400
<7> [303.025592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400
<7> [303.026019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [303.026396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400
<7> [303.026819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096
<7> [303.027489] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.028007] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.028679] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.028481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.038072] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.038673] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.039632] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.054917] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.055759] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.057042] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.071437] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.072297] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.105622] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.105575] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.105958] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.106189] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.106297] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.106776] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.107110] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.107483] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.107873] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.121384] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.122117] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.123272] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.138019] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.138590] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.139708] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.154727] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.155377] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.188894] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.188762] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.189167] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.189519] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.189541] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.190169] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.190539] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.191000] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.191260] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.204754] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.205420] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.206597] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.221445] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.222049] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.223152] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.237979] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.238623] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.271607] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.271995] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.272187] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.272346] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.272875] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.273471] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.273878] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.274295] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.274639] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.287956] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.288486] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.289634] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.304717] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.305340] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.306418] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.321352] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.321997] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.355500] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.355655] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.356259] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.356308] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.356957] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.356880] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.357385] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.357904] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.358127] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.371403] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.372092] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.373306] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.387986] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.388522] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.389633] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.404678] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.405205] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.438825] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.438764] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.439241] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.439432] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.439703] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.440016] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.440314] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.440804] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.441316] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.454800] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.455622] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.456861] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.471338] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.471943] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.473006] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.487955] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.488488] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.521653] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.522379] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.522185] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.522672] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.523435] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.523887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [303.524218] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [303.524514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [303.524864] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [303.525134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [303.525392] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [303.525673] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [303.525923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [303.526218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [303.526673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [303.527096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [303.527574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [303.528053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [303.528465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [303.529246] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.529547] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.530005] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.530594] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.537893] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.538358] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.539238] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.554728] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.555450] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.556620] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.571307] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.571896] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.605575] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.605896] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.606381] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.606575] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.606873] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.607351] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.607830] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.608304] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.608550] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.621320] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.622118] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.623362] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.637984] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.638535] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.639721] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.654694] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.655389] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.688803] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.688783] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.689279] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.689718] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.689802] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.690402] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.690903] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.691341] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.691566] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.704579] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.705105] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.706089] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.721318] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.721975] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.723034] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.737943] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.738460] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.771692] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.772047] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.772078] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.772437] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.772941] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.773519] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.773883] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.774265] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.774637] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.787913] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.788575] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.789689] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.804639] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.805327] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.806429] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.821210] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.821808] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.855486] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.855697] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.856094] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.856306] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.856458] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.856895] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.857517] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.858026] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.858109] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.871204] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.871770] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.872812] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.888018] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.888711] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.889855] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.904558] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.905102] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.938986] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.938724] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [303.939341] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [303.939932] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [303.940111] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.940885] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [303.941270] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [303.941816] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [303.942106] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [303.954552] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.955210] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [303.956383] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [303.971348] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.972072] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [303.973380] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [303.987919] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [303.988511] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.021810] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.022204] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.022358] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.022881] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.023190] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.023884] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.024253] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.024664] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.025007] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.037946] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.038568] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.039753] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.054582] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.055165] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.056225] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.071205] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.071815] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.104829] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.105411] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.105326] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.105783] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.106336] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.106933] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.107220] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.107621] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.108002] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.121190] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.121762] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.122859] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.137879] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.138430] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.139530] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.154576] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.155202] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.188763] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.188872] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.189373] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.189693] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.189892] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.190422] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.190771] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.191266] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.191616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.204538] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.205163] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.206284] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.221211] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.221778] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.222883] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.237983] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.238617] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.271896] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.272616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.272445] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.272921] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.273634] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.274404] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.274695] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.275176] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.275564] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.287902] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.288634] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.289896] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.304645] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.305458] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.306644] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.321193] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.321940] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.354907] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.355434] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.355416] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.355985] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.356764] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.357421] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.357772] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.358199] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.358576] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.371239] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.371939] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.373188] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.387914] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.388467] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.389703] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.404514] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.405081] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.438861] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.438798] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.439288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.439730] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.439858] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.440484] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.440950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.441390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.441664] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.454535] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.455294] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.456485] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.471240] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.471956] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.473168] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.487830] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.488380] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.521810] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.522075] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.522263] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.522678] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.523015] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.523642] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.524057] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.524498] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.524841] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.537892] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.538637] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.540035] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.554538] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.555061] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.556098] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.571127] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.571773] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.604833] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.605314] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.605748] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.605745] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.606895] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.607620] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.607992] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.608398] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.608802] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.621092] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.621718] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.622931] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.637897] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.638513] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.639622] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.654566] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.655358] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.688732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.688845] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.689296] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.689716] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.689710] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.690460] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.690821] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.691246] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.691649] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.704436] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.705053] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.706114] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.721242] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.721912] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.723074] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.737787] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.738383] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.771862] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.772205] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.772400] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.772861] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.773217] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.773910] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.774246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.774683] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.775098] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.787759] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.788492] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.789614] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.804438] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.805035] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.806106] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.821105] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.821682] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.854865] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.855374] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.855331] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.855756] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.856319] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.857010] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.857341] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.857724] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.858123] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.871114] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.871653] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.872768] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.887897] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.888549] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.889734] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.904468] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.905160] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.938712] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.938885] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [304.939259] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [304.939469] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.939623] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [304.939994] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [304.940886] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [304.941695] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [304.941575] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [304.954432] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.955161] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [304.956283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [304.971171] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.971818] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [304.972978] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [304.987765] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [304.988447] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [305.022015] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.021928] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.022495] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.023010] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.023129] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1361) -> ( 0 - 4051), size 1361 -> 4051
<7> [305.023442] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1361 - 4051) -> ( 0 - 0), size 2690 -> 0
<7> [305.023743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [305.024156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [305.024445] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [305.024758] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [305.025126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [305.025539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [305.025979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [305.026461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [305.026897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [305.027308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [305.028421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.028827] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.055022] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.055508] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.055575] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.056106] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.057258] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.057752] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.088725] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.088933] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.089430] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.089852] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.090333] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.090776] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.122069] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.122032] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.122582] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.123119] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.123783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.124322] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.155041] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.155347] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.155569] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.156096] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.157590] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.158122] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.187962] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.188630] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.188451] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.188875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.190240] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.190670] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.221999] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.222062] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.222603] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.223135] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.223644] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.224150] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.255268] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.255039] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.255532] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.255987] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.256732] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.257191] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.288066] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.288640] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.288576] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.289031] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.290119] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.290526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.321933] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.322065] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.322559] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.323012] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.323432] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.323865] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.355256] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.355064] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.355589] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.356116] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.356840] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.357376] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.371347] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [305.388098] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.388651] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.388647] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.389183] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.390326] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.390779] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.421975] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.422071] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.422565] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.423022] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.423468] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.423977] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.455213] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.455104] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.455595] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.456058] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.456639] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.457099] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.488102] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.488611] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.488607] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.489058] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.490103] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.490515] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.521911] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.521991] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.522503] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.523014] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.523549] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.524017] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.555164] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.555113] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.555631] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.556159] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.556701] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.557217] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.588131] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.588674] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.588969] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.589215] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.590605] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.591041] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.621982] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.622123] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.622624] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.623084] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.623510] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.623913] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.655175] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.655137] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.655626] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.656082] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.656498] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.656894] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.688012] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.688439] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.688662] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.688863] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.690171] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.690691] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.721896] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.723145] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.723697] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.724238] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.724705] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.725241] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.755263] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.755156] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.755685] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.756219] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.756685] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.757195] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.788066] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.788570] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.788792] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.789416] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.789977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.790486] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.821906] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.823077] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.823569] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.824024] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.824454] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.824882] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.855172] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.855157] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.855668] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.856126] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.856604] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.857036] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.888153] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.888695] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.888711] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.889243] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.890310] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.890758] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.921807] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.922174] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.922667] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.923138] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.923582] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.923986] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.955165] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [305.955176] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.955714] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.956252] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.956850] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.957373] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [305.988182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [305.988792] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [305.988726] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [305.989264] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [305.990538] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [305.991042] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.021932] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.022096] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.022652] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.023164] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [306.023168] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.023514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0
<7> [306.023843] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49
<7> [306.024263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50
<7> [306.024636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 1
<7> [306.025142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [306.025598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [306.026092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.026532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.026954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [306.028146] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.028607] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.055072] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.055315] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.055539] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.055924] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.056985] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.057591] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.088197] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.088586] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.088755] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.089295] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.090330] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.090835] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.121862] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.122221] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.122777] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.123325] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.123788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.124312] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.155237] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.155097] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.155576] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.156018] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.156889] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.157349] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.188224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.188587] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.188783] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.189326] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.190447] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.190937] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.221216] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.221944] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.221770] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.222299] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.223761] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.224289] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.255283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.255152] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.255714] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.256228] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.257110] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.257577] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.288400] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.288228] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.288781] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.289320] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.290158] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.290617] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.321226] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.321848] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.321776] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.322316] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.323680] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.324182] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.355248] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.355242] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.355803] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.356336] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.357062] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.357614] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.388496] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.388254] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.388814] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.389348] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.390290] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.390749] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.420878] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [306.421401] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [306.421495] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.421844] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [306.422039] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.422336] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [306.422599] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.422788] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [306.423354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [fastset]
<7> [306.423800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [306.424298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [306.424695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [306.425078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [306.425524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [306.425915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [306.426316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [306.426725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [306.427105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [306.427465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [306.427879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [306.428298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [306.428651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [306.429055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [306.429474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [306.429826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [306.430184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [306.430527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [306.430866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [306.431294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [306.431643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [306.431978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [306.432335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [306.432651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [306.432949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [306.433285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [306.433567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [306.433827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [306.434081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [306.434370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [306.434611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [306.434837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [306.435069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [306.435321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [306.435567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [306.435769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [306.435973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [306.436180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [306.436361] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [306.436539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [306.436707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [306.436875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [306.437066] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [306.437270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [306.437423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [306.437574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [306.437718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.437861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.437998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.438160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [306.438296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [306.438428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.438564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.438696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.438843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [306.438993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [306.439132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:427] 72x72 format = XV48 little-endian (0x38345658) modifier = 0x0, visible: yes
<7> [306.439273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [306.439394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 64.000000x64.000000+4.000000+4.000000 dst: 64x64+0+0
<7> [306.439862] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.440004] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.440217] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [306.440352] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [306.440483] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [306.453996] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [306.455300] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [306.455437] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [306.458796] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [306.458839] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:427] is removed
<7> [306.458884] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [306.458994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [306.459113] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 17, 17, 17, 17, 17, 17, 0, 0, 0, 17, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [306.459213] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 35, 35, 35, 35, 35, 35, 0, 0, 49, 35, 49 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [306.459312] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 40, 40, 40, 40, 40, 40, 0, 0, 50, 40, 50 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [306.459429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [306.459577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [306.459715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [306.459847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [306.459975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [306.460110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [306.460449] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<6> [306.485711] [IGT] kms_plane: finished subtest pipe-B-plane-0, FAIL
<6> [306.486377] [IGT] kms_plane: starting dynamic subtest pipe-B-plane-3
<7> [306.486523] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<7> [306.486937] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [306.487149] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [306.487314] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [306.487473] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update not enabled because it would inhibit pipe CRC calculation
<7> [306.487609] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [306.487764] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [306.487946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [fastset]
<7> [306.488121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [306.488159] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.488278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [306.488346] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.488414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [306.488496] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.488544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [306.488668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [306.488788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [306.488904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [306.489018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [306.489139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [306.489248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [306.489354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [306.489460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [306.489558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [306.489656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [306.489749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [306.489841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [306.489931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [306.490019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [306.490112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [306.490212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [306.490318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [306.490425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [306.490517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [306.490602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [306.490683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [306.490760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [306.490838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [306.490917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [306.490993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [306.491069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [306.491160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [306.491250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [306.491339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [306.491424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [306.491501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [306.491575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [306.491648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [306.491721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [306.491789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [306.491859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [306.491934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [306.492009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [306.492085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [306.492254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [306.492354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [306.492441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [306.492519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.492595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.492671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.492742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [306.492811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [306.492880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.492955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.493030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [306.493122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [306.493215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [306.493696] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.493800] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.504165] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [306.504327] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [306.526162] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.526624] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.527050] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.554680] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.555070] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4018), size 0 -> 4018
<7> [306.555533] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (4018 - 4051), size 0 -> 33
<7> [306.555816] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [306.556093] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [306.556463] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [306.556706] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [306.556939] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [306.557198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [306.557447] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [306.557695] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [306.557989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [306.558446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [306.558802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [306.559159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.559583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.559961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [306.561177] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.562014] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4018), size 0 -> 4018
<7> [306.562365] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (4018 - 4051), size 0 -> 33
<7> [306.562605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [306.562831] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [306.563096] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [306.563383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [306.563602] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [306.563811] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [306.564021] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [306.564276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [306.564521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [306.564871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [306.565254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [306.565610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.565961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.566305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [306.569365] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.569585] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.570376] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [306.570541] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:152:plane 1B]
<7> [306.587257] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [306.604432] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.605218] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [306.605785] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [306.620967] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [306.621619] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.637583] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [306.638089] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [306.654376] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [306.705082] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [306.722203] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.722737] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.723188] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.724514] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4040), size 4018 -> 4040
<7> [306.724939] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> (4040 - 4051), size 33 -> 11
<7> [306.725379] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [306.725708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [306.726022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [306.726454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [306.726826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1738550 num active planes 2
<7> [306.727308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [306.727755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [306.728256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [306.728687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [306.729064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [306.730715] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.731121] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.771730] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.788215] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.788713] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.789138] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.790086] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4040) -> ( 0 - 4039), size 4040 -> 4039
<7> [306.790566] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4040 - 4051) -> (4039 - 4051), size 11 -> 12
<7> [306.790927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [306.791320] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [306.791642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [306.791938] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [306.792247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [306.792521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [306.793479] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.793733] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.821553] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [306.821336] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.821945] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.822554] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.844446] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [306.844873] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [306.845307] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [306.845664] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [306.846003] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [306.846733] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [306.847122] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [306.847641] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [306.848182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [306.848613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.849033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.849496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [306.850632] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.851016] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.871656] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.872241] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.872823] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.873407] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.895142] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.895586] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.921222] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.921703] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.922080] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [306.922143] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.943560] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [306.944025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [306.944425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [306.944697] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [306.944957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [306.945236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [306.945586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [306.946018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [306.946438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [306.946830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [306.947197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [306.947542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [306.948867] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.949226] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [306.971242] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [306.971738] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [306.972150] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [306.972212] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [306.991717] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [306.992151] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [306.992615] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [306.992946] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [306.993302] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [306.993653] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [306.993991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [306.994416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [306.994766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [306.995100] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.995512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [306.995842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [306.996661] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [306.996942] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.021912] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.022241] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.022697] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.023096] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.043660] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.044138] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.071241] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.071731] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.071729] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.072121] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.091675] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.092105] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.138355] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.155353] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.155776] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.156151] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.157492] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4033) -> ( 0 - 4040), size 4033 -> 4040
<7> [307.157867] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4033 - 4051) -> (4040 - 4051), size 18 -> 11
<7> [307.158187] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.158758] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.159055] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [307.159336] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [307.159619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1738550 num active planes 2
<7> [307.159946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [307.160268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [307.160554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [307.160890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [307.161149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [307.162177] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.162450] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.204959] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.222267] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.222711] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.223086] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4040) -> ( 0 - 4039), size 4040 -> 4039
<7> [307.223108] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.223660] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4040 - 4051) -> (4039 - 4051), size 11 -> 12
<7> [307.224023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.224607] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4040) -> ( 0 - 4039), size 4040 -> 4039
<7> [307.224866] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4040 - 4051) -> (4039 - 4051), size 11 -> 12
<7> [307.225123] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.225551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [307.225905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [307.226201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.226520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.226833] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [307.227748] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.227995] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.254672] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.256262] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.256779] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.257206] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.272089] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [307.272466] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [307.272718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.272945] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.273149] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [307.273527] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [307.273758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [307.274123] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [307.274320] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [307.274484] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.274658] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.274805] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [307.274950] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [307.275094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [307.275487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [307.275691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [307.275886] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.276073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.276262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [307.276835] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.277015] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.304985] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.305373] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.305870] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.306336] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.324762] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.325052] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.355559] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.355408] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.355956] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.356487] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.377622] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [307.377980] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [307.378202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.378457] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.378652] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [307.378834] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [307.379074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.379622] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [307.379803] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [307.379956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.380103] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.380241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [307.380394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [307.380547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.380910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4033) -> ( 0 - 4039), size 4033 -> 4039
<7> [307.381072] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4033 - 4051) -> (4039 - 4051), size 18 -> 12
<7> [307.381194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.381328] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.381462] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0
<7> [307.381594] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0
<7> [307.381727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.381919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [307.382105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [307.382298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.382483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.382642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [307.383479] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.383683] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.405296] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.405526] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.405777] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.406149] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.424864] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4039) -> ( 0 - 4033), size 4039 -> 4033
<7> [307.425084] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4039 - 4051) -> (4033 - 4051), size 12 -> 18
<7> [307.425190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.425318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [307.425418] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 0, 3, 0 -> 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0
<7> [307.425518] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 0, 5, 0 -> 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0
<7> [307.425649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [307.425818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [307.425976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [307.426124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.426277] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.426427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [307.427118] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.427311] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.455325] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.455603] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.455769] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.456146] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.475792] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.476501] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.505539] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.505319] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.505879] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.506391] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.527747] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.528110] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.554343] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.554880] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.555370] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.555823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.556526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.571829] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.572995] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4033) -> ( 0 - 4020), size 4033 -> 4020
<7> [307.573480] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4033 - 4051) -> (4020 - 4051), size 18 -> 31
<7> [307.573863] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.574236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [307.574714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 4, 11, 11, 11, 11, 11, 0, 0, 0, 4, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [307.575104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 7, 16, 16, 16, 16, 16, 0, 0, 0, 7, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [307.575684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1738550 num active planes 2
<7> [307.576203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [307.576761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [307.577294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [307.577770] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [307.578254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [307.604336] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.604781] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.605131] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.605549] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.606007] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.621634] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.622522] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4020) -> ( 0 - 4019), size 4020 -> 4019
<7> [307.622909] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4020 - 4051) -> (4019 - 4051), size 31 -> 32
<7> [307.623254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.623690] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [307.624017] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [307.624366] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [307.624723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.625174] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [307.625653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [307.626118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.626582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.627014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [307.654450] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.654362] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.654794] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.655125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [307.655151] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.655548] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [307.655834] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.656104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [307.656469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [307.656761] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [307.657085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [307.657542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [307.658000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [307.658405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.658792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.659188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [307.660344] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.660770] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.687938] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.688370] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.688892] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.689338] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.694182] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.694763] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.721456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.721664] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.721882] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.722236] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.722490] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4019), size 4018 -> 4019
<7> [307.722832] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> (4019 - 4051), size 33 -> 32
<7> [307.723119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.723463] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [307.723755] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [307.724088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [307.724459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.724876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [307.725329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [307.725722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.726127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.726552] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [307.727666] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.728088] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.754375] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.754781] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.755018] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.755109] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.756068] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [307.756502] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [307.756820] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.757112] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [307.757484] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [307.757795] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [307.758400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [307.758875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [307.759337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [307.759777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.760211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.760666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [307.761847] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.762311] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.788551] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.788381] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.788895] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.789357] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.790169] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.790683] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.821629] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [307.821490] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.822049] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.822597] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.823509] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.823983] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.854510] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.855131] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.855712] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.856188] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.856774] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.871327] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.872284] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4020), size 4018 -> 4020
<7> [307.872741] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> (4020 - 4051), size 33 -> 31
<7> [307.873070] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.873423] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [307.873737] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [307.874053] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [307.874513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1738550 num active planes 2
<7> [307.875166] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4020), size 4018 -> 4020
<7> [307.875539] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> (4020 - 4051), size 33 -> 31
<7> [307.875825] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.876114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [307.876448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [307.876781] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [307.877084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1738550 num active planes 2
<7> [307.877729] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4020), size 4018 -> 4020
<7> [307.878010] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> (4020 - 4051), size 33 -> 31
<7> [307.878274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.878614] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [307.878918] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21
<7> [307.879173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22
<7> [307.879518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1738550 num active planes 2
<7> [307.879907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1826 qgv_peak_bw: 38400
<7> [307.880324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1826 qgv_peak_bw: 38400
<7> [307.880791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [307.881205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1826 qgv_peak_bw: 38400
<7> [307.881767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1826
<7> [307.904509] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.905018] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.905497] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.905970] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.906533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.921488] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.922119] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4020) -> ( 0 - 4019), size 4020 -> 4019
<7> [307.922558] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4020 - 4051) -> (4019 - 4051), size 31 -> 32
<7> [307.922902] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [307.923222] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [307.923664] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 7, 27, 27, 27, 27, 27, 0, 0, 21, 7, 21 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [307.923979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 9, 31, 31, 31, 31, 31, 0, 0, 22, 9, 22 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [307.924505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [307.924932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [307.925333] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [307.925850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.926279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [307.926711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [307.954290] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [307.954513] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.954944] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.955112] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [307.955303] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.955449] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [307.955734] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [307.956001] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [307.956262] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [307.956660] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [307.956979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [307.957422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [307.957830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [307.958222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.958706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [307.959102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [307.960067] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.960527] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [307.987678] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [307.988520] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [307.988947] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [307.989305] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [307.989763] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [307.990198] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.020966] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.021531] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.022125] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.022642] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.023071] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.023586] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.054342] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.054548] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.055106] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.055622] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.060147] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.060623] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.087830] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.088428] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.088914] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.089345] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.091692] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.092224] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.121065] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.121570] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.122080] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.122553] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.124961] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.125466] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.154296] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.154544] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.155048] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.155517] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.158134] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.158627] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.187546] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.188180] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.188093] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.188624] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.189068] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4019), size 4018 -> 4019
<7> [308.189440] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> (4019 - 4051), size 33 -> 32
<7> [308.189734] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [308.190018] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0
<7> [308.190304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25
<7> [308.190711] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26
<7> [308.191109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2086260 num active planes 2
<7> [308.191615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400
<7> [308.192077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400
<7> [308.192496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [308.192923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400
<7> [308.193308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191
<7> [308.194367] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.194855] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.221544] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.221554] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.222114] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.222649] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.223117] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.223689] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.254777] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.254566] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.255121] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.255619] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.256163] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.256650] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.287575] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.288141] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.288133] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.288669] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.289652] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.290130] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.321547] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.321585] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.322146] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.322685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.323153] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.323664] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.354797] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.354543] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.355103] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.355635] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.356305] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.356848] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.387599] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.388196] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.388066] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.388507] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.389489] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.389921] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.421479] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.421492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.421996] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.422421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.422933] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.423353] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.454719] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.454596] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.455105] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.455566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.455990] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.456396] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.487612] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.488120] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.488170] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.488711] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.489657] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.490143] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.521498] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.522619] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.523175] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.523715] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.524186] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.524689] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.554637] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.554631] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.555133] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.555622] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.556096] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.556563] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.587621] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.588113] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.588133] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.588596] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.589948] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.590354] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.621399] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.621633] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.622138] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.622607] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.623031] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.623492] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.654725] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.654566] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.655123] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.655644] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.656194] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.656710] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.687524] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.688255] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.688110] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.688802] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.690097] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.690635] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.721521] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.721558] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.722114] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.722623] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.723098] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.723568] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.754762] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.754650] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.755206] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.755761] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.756227] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.756689] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.787647] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.788052] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.788111] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.788558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.789295] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.789772] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.821346] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.821666] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.822170] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.822637] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.823058] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.823481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.854755] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.854673] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.855227] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.855772] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.856238] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.856702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.887697] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.888055] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.888251] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.888789] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.889461] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.889968] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.921324] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.921703] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.922256] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.922797] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.923278] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.923855] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.954716] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [308.954687] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.955243] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.955768] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.956240] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.956783] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [308.987704] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [308.988052] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [308.988199] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [308.988737] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [308.989198] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4019) -> ( 0 - 4018), size 4019 -> 4018
<7> [308.989517] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4019 - 4051) -> (4018 - 4051), size 32 -> 33
<7> [308.989887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7> [308.990172] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 5, 13, 13, 13, 13, 13, 0, 0, 0, 5, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [308.990475] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 11, 27, 27, 27, 27, 27, 0, 0, 25, 11, 25 -> 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0
<7> [308.990914] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 14, 31, 31, 31, 31, 31, 0, 0, 26, 14, 26 -> 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0
<7> [308.991271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2781680 num active planes 2
<7> [308.991714] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [308.992160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [308.992570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [308.992984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [308.993357] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [308.994338] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [308.994781] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.021464] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.021698] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.022197] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.022778] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.023238] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.023803] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.054718] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.054626] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.055160] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.055607] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.056250] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.056734] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.087896] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.088593] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.089078] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.089501] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.089988] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.090412] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.116608] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD off
<7> [309.117065] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [309.121399] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.121601] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.122149] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.122644] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.123119] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.123611] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.154680] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.154707] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.155252] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.155786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.156315] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.156789] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.187970] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.187723] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.188269] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.188806] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.189714] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.190185] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.220702] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.221206] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.221523] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.221709] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.223238] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.223737] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.254705] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.254635] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.255181] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.255694] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.256346] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.256830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.287868] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.288696] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.289179] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.289639] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.290068] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.290481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.320764] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.321383] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.321306] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.321845] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.323078] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.323561] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.354633] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.354739] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.355228] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.355721] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.356187] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.356645] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.387742] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.388010] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.388236] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.388756] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.389653] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.390107] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.420769] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.421264] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.421828] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.421730] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.423477] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.424014] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.454587] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.454773] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.455268] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.455731] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.456148] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.456562] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.487769] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.487739] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.488154] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.488517] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.489072] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.489468] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.520662] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.521051] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.521346] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.521402] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.522997] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.523500] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.554571] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.554680] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.555144] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.555570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.556387] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.556924] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.587999] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.588797] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.589344] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.589871] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.590345] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.590847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.620778] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.621368] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.621319] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.621844] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.622808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.623258] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.654674] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.654799] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.655341] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.655874] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.656342] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.656870] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.687835] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.687733] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.688230] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.688686] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.689143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.689569] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.720780] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.721223] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.721271] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.721734] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.722548] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.723009] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.754472] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.754804] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.755217] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.755582] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.756034] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.756404] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.787960] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.787736] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.788226] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.788655] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.789421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.789850] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.820834] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.821079] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.821284] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.821741] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.822480] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.823013] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.854920] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.854760] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.855392] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.855959] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.856711] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.857249] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.887913] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.887729] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.888275] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.888747] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.889498] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.889985] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.920737] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.921135] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [309.921235] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.921659] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.922631] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.923106] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.954526] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [309.954740] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.955230] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.955652] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.956318] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [309.956763] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [309.987037] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [309.987499] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [309.987953] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [309.987976] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [309.988361] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [309.988402] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [309.988808] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [309.988779] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [309.989324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [fastset]
<7> [309.989751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [309.990141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [309.990521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [309.990935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [309.991334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [309.991719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [309.992128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [309.992495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [309.992905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [309.993326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [309.993733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [309.994102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [309.994478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [309.994936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [309.995296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [309.995652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [309.996076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [309.996459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [309.996831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [309.997182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [309.997521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [309.997900] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [309.998248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [309.998553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [309.998901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [309.999212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [309.999513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [309.999814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [310.000073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [310.000349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [310.000597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [310.000872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [310.001148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [310.001368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [310.001611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [310.001844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [310.002047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [310.002238] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [310.002433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [310.002621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [310.002827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [310.003005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [310.003174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [310.003343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0
<7> [310.003510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries
<7> [310.003669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [310.003856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.004037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.004209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.004363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [310.004516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [310.004683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.004872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.005005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.005135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [310.005263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [310.005388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:428] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [310.005515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [310.005636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [310.005774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [FB:431] 72x72 format = XV30 little-endian (0x30335658) modifier = 0x0, visible: yes
<7> [310.005908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [310.006024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 64.000000x64.000000+4.000000+4.000000 dst: 64x64+0+0
<7> [310.006440] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [310.006580] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [310.006764] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [310.006887] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [310.007014] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [310.020030] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:152:plane 1B]
<7> [310.036831] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [310.038608] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [310.039163] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [310.043431] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [310.043524] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:431] is removed
<7> [310.043634] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4018) -> ( 0 - 4051), size 4018 -> 4051
<7> [310.044003] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (4018 - 4051) -> ( 0 - 0), size 33 -> 0
<7> [310.044280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [310.044577] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [310.044895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 0, 19, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [310.045179] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 0, 22, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [310.045529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [310.045936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [310.046317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [310.046670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [310.047030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [310.047323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<6> [310.054498] [IGT] kms_plane: finished subtest pipe-B-plane-3, SUCCESS
<6> [310.055359] [IGT] kms_plane: starting dynamic subtest pipe-B-plane-5
<6> [310.055873] [IGT] kms_plane: finished subtest pipe-B-plane-5, SUCCESS
<7> [310.070407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [310.070559] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [310.070652] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [310.070756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [310.070860] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [310.070968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [310.071063] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [310.071148] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [310.071233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [310.071314] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [310.071395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [310.071476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [310.071555] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [310.071634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [310.071747] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [310.071824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [310.071899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [310.071974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [310.072048] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [310.072122] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [310.072195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [310.072268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [310.072340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [310.072411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [310.072482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [310.072553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [310.072624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [310.072694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [310.072783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [310.072854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [310.072924] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [310.072996] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [310.073069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [310.073141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [310.073214] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [310.073286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [310.073357] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [310.073429] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [310.073500] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [310.073571] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing DPLL 0
<7> [310.073718] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [310.073784] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0
<7> [310.073862] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [310.073924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [310.073985] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [310.074039] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [310.074093] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [310.074149] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [310.074215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [310.074297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [310.074376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [310.074455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [310.074532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [310.074608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [310.074682] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [310.074784] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43464 kHz -> 0 kHz
<7> [310.074875] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [310.074967] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [310.075055] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [310.075143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [modeset]
<7> [310.075219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [310.075294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [310.075368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [310.075442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [310.075516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [310.075589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [310.075692] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [310.117194] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [310.117641] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [310.324866] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [310.325513] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [310.346164] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [310.346599] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [310.347084] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [310.398936] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [310.399473] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [310.407926] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [310.408431] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [310.408485] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [310.409831] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [310.410341] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [310.410929] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [310.411325] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [310.411661] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [310.412079] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [310.412399] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [310.412762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [310.413160] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [310.413460] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [310.413754] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [310.414111] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [310.414382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [310.414638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [310.414934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [310.415202] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [310.415586] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [310.415890] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [310.416146] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [310.416644] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [310.417090] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [310.417558] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [310.417885] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [310.418286] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [310.418590] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [310.420052] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:428] from all active usage due to RMFB ioctl
<6> [310.421405] [IGT] kms_plane: finished subtest pixel-format-source-clamping, FAIL
<7> [310.423113] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [310.423512] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [310.423828] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [310.424117] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [310.424387] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [310.424672] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [310.424939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [310.425166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [310.425382] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [310.425594] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [310.425805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [310.425997] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [310.426184] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [310.426363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [310.426539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [310.426709] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [310.426913] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [310.427091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [310.427244] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [310.427394] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [310.427539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [310.427680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [310.427833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [310.427975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [310.428110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [310.428245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [310.428377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [310.428505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [310.428627] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [310.428743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [310.428985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [310.429121] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [310.429248] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [310.429357] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [310.429463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [310.429563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [310.429661] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [310.429757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [310.429869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [310.429963] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [310.430053] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [310.430142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [310.430229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [310.430317] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [310.430459] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [310.430538] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [310.430620] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [310.430698] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [310.430778] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [310.430858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [310.430928] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [310.430997] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [310.431081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [310.431188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [310.431275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [310.431360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [310.431444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [310.431526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [310.431606] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [310.431705] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [310.431789] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [310.431887] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [310.431987] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [310.432103] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0
<7> [310.432210] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0
<7> [310.432308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [310.432391] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [310.432470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [310.432548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [310.432624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [310.432699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [310.432779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [310.432873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [310.432969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [310.433064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [310.433148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [310.433220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [310.433291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [310.433362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [310.433432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [310.433503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [310.433573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [310.433644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [310.433714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [310.433788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [310.433880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [310.433976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [310.434070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [310.434144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [310.434218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [310.434289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [310.434362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [310.434434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [310.434505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [310.434581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [310.434661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [310.434736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [310.434827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [310.434918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [310.435009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [310.435094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [310.435164] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [310.435234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [310.435312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [310.435390] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [310.435459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [310.435527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [310.435595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [310.435663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [310.435731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [310.435813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [310.435772] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [310.435907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [310.435970] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [310.436001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.436070] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [310.436088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.436160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.436192] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [310.436231] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [310.436301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [310.436372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.436446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.436521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [310.436592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [310.436660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [310.436730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [310.436831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [310.436828] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [310.436942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [310.436986] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [310.437040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [310.437108] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [310.437133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [310.437206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [310.437232] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [310.437273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [310.437342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [310.438078] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [310.438211] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [310.438479] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [310.438616] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [310.438753] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [310.438868] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [310.438971] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [310.439074] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [310.439139] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [310.439201] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [310.439260] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [310.439319] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [310.439377] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [310.439438] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [310.439503] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [310.439567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [310.439631] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [310.439697] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [310.439755] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [310.439833] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [310.439929] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [310.440104] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [310.440163] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [310.440261] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [310.441573] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [310.441653] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [310.443342] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [310.443407] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (465 ms remaining)
<7> [310.917185] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [310.927725] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [310.928304] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [310.928809] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [310.964879] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [310.965398] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [310.965850] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [310.966320] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [311.139521] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [311.140074] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [311.140481] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [311.142756] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [311.144136] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [311.144987] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [311.146203] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [311.147420] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [311.148540] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [311.148958] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [311.150452] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [311.150878] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [311.151758] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [311.152335] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [311.152728] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [311.153173] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [311.169205] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [311.171112] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [311.171564] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [311.174847] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [311.176048] [IGT] kms_plane: exiting, ret=98
<6> [311.186615] Console: switching to colour frame buffer device 180x56
<7> [311.202975] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [311.203584] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [311.204172] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [311.204716] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [311.205388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [311.236970] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [311.237559] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [311.238072] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
Created at 2025-12-22 16:17:45