igt@xe_pm@d3hot-basic-exec on shard-bmg@xe-4278-084f282815b3726d333e8c9c16b5e47ef9813ae7 Test details

Detail	Value
Duration	3.92 seconds
Hostname	shard-bmg-2
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4278-084f282815b3726d3+ x86_64)
Out	Using IGT_SRANDOM=1766249400 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-basic-exec Subtest d3hot-basic-exec: SUCCESS (3.919s)
Err	Starting subtest: d3hot-basic-exec Subtest d3hot-basic-exec: SUCCESS (3.919s)
Dmesg	<6> [536.113405] Console: switching to colour dummy device 80x25 <6> [536.113721] [IGT] xe_pm: executing <6> [536.226653] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [536.226714] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [536.226722] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [536.226730] nvme 0000:05:00.0: [ 0] RxErr (First) <7> [536.548289] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [536.660041] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <6> [536.662796] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [536.662827] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [536.662839] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [536.662854] nvme 0000:05:00.0: [ 0] RxErr (First) <6> [537.163644] [IGT] xe_pm: starting subtest d3hot-basic-exec <7> [537.166194] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.166308] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [537.166399] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000 <7> [537.166491] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.166588] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.166676] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [537.166760] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.166857] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [537.166974] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [537.167089] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [537.167180] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [537.167268] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [537.167477] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.167595] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [537.167683] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000 <7> [537.167775] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.167896] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.168000] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [537.168086] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.168176] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [537.168266] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [537.168353] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [537.168441] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [537.168532] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [537.168671] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [537.168743] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [537.168819] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [537.169018] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.169118] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [537.169204] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000 <7> [537.169289] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.169383] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.169500] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [537.169585] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.169682] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [537.169780] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [537.169890] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [537.169993] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [537.170079] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [537.170180] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [537.170251] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [537.170352] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [537.170443] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [537.170517] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [537.170581] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [537.170651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [537.170714] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [537.170777] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [537.170847] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [537.170921] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [537.171004] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [537.171119] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [537.171206] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [537.171299] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [537.171405] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [537.171505] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [537.171591] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [537.171679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [537.171770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [537.171898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [537.171998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [537.172095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [537.172185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [537.172273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [537.172359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7208960, data_n: 8388608, link_m: 480597, link_n: 524288, tu: 64 <7> [537.172444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [537.172540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [537.172635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [537.172727] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [537.172816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [537.172932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [537.173030] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [537.173118] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [537.173200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [537.173312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [537.173397] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [537.173488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [537.173575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [537.173662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [537.173747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [537.173831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [537.173935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [537.174044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [537.174149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 162000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [537.174242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [537.174326] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [537.174415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [537.174496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [537.174576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [537.174659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 162000 <7> [537.174763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [537.174852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [537.174950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x50a8 <7> [537.175034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2120 <7> [537.175122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcd9a <7> [537.175204] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [537.175285] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x5ab8 <7> [537.175373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x4c34 <7> [537.175481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [537.175573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [537.175657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x6000 <7> [537.175747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [537.175844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [537.175939] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x40, hdmi rate: 0x00 <7> [537.176027] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [537.176137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [537.176222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [537.176312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.176397] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.176484] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.176566] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [537.176648] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [537.176731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.176835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.176944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.177050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [537.177151] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [537.177245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [537.177339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [537.177431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [537.177549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [537.177639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [537.177735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [537.177828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [537.177951] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [fastset] <7> [537.178048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [537.178142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [537.178258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [537.178354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [537.178453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [537.178549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [537.178641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [537.178733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [537.178824] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [537.178825] xe 0000:03:00.0: colorspace: RGB <7> [537.178827] xe 0000:03:00.0: scan mode: Underscan <7> [537.178828] xe 0000:03:00.0: colorimetry: No Data <7> [537.178829] xe 0000:03:00.0: picture aspect: 16:9 <7> [537.178830] xe 0000:03:00.0: active aspect: Same as Picture <7> [537.178831] xe 0000:03:00.0: itc: No Data <7> [537.178832] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [537.178833] xe 0000:03:00.0: quantization range: Default <7> [537.178834] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [537.178835] xe 0000:03:00.0: video code: 16 <7> [537.178837] xe 0000:03:00.0: ycc quantization range: Full <7> [537.178845] xe 0000:03:00.0: hdmi content type: Graphics <7> [537.178846] xe 0000:03:00.0: pixel repeat: 0 <7> [537.178847] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [537.178849] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [537.178850] xe 0000:03:00.0: vendor: Intel <7> [537.178852] xe 0000:03:00.0: product: Discrete gfx <7> [537.178853] xe 0000:03:00.0: source device information: PC General (0x9) <7> [537.178855] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [537.178856] xe 0000:03:00.0: empty frame <7> [537.178857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [537.178948] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [537.179070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [537.179168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [537.179270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [537.179369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [537.179467] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [537.179560] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [537.179653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [537.179745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [537.179836] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [537.179967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [537.180061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [537.180160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [537.180256] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [537.180349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [537.180444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [537.180537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [537.180642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625 <7> [537.180752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [537.180859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [537.180949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0 <7> [537.181047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [537.181136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06 <7> [537.181226] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [537.181316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [537.181433] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [537.181524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [537.181620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [537.181712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00 <7> [537.181801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [537.181935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [537.182024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [537.182144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [537.182236] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [537.182329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [537.182431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.182532] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.182626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.182717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [537.182807] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [537.182921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.183026] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.183124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.183219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [537.183319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [537.183410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [537.183501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [537.183592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [537.183713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [537.184239] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A] <7> [537.210215] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [537.210869] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [537.231787] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [537.234967] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [537.235097] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [537.236035] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [537.237342] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [537.238205] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [537.238636] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [537.239072] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [537.239427] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [537.239762] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [537.240132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [537.240548] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [537.241016] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [537.241361] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [537.241669] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [537.241978] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [537.242250] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [537.242625] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [537.242980] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [537.243247] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [537.243505] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [537.245383] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [537.245778] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [537.247709] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [537.248228] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [537.248446] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [537.249161] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [537.249535] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [537.252686] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.252819] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [537.252951] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.253066] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [537.253180] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [537.253286] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [537.253391] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [537.253516] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [537.253598] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [537.253725] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.253832] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [537.253936] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.254035] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [537.254132] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [537.254226] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [537.254322] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [537.254459] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [537.254560] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [537.254650] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [537.254749] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [537.254849] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [537.254958] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [537.255053] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [537.255159] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [537.255237] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [537.255327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [537.255405] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [537.255478] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [537.255550] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [537.255620] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [537.255688] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [537.255772] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0 <7> [537.255881] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [537.255980] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [537.256076] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [537.256202] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [537.256309] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [537.256407] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [537.256500] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [537.256597] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [537.256696] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [537.256795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [537.256907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [537.257001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [537.257093] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [537.257183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [537.257274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [537.257364] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [537.257366] xe 0000:03:00.0: colorspace: RGB <7> [537.257367] xe 0000:03:00.0: scan mode: Underscan <7> [537.257368] xe 0000:03:00.0: colorimetry: No Data <7> [537.257370] xe 0000:03:00.0: picture aspect: 16:9 <7> [537.257371] xe 0000:03:00.0: active aspect: Same as Picture <7> [537.257372] xe 0000:03:00.0: itc: No Data <7> [537.257374] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [537.257375] xe 0000:03:00.0: quantization range: Default <7> [537.257376] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [537.257377] xe 0000:03:00.0: video code: 16 <7> [537.257379] xe 0000:03:00.0: ycc quantization range: Full <7> [537.257380] xe 0000:03:00.0: hdmi content type: Graphics <7> [537.257381] xe 0000:03:00.0: pixel repeat: 0 <7> [537.257382] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [537.257384] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [537.257386] xe 0000:03:00.0: vendor: Intel <7> [537.257387] xe 0000:03:00.0: product: Discrete gfx <7> [537.257389] xe 0000:03:00.0: source device information: PC General (0x9) <7> [537.257390] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [537.257392] xe 0000:03:00.0: empty frame <7> [537.257393] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [537.257482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [537.257573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [537.257664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [537.257753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [537.257842] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [537.257944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [537.258033] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [537.258124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [537.258213] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [537.258304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [537.258395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [537.258485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [537.258577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [537.258667] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [537.258758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [537.258848] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [537.258952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [537.259044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625 <7> [537.259132] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [537.259221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [537.259312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0 <7> [537.259402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [537.259494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06 <7> [537.259583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [537.259674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [537.259764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [537.259858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [537.259949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [537.260038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00 <7> [537.260132] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [537.260228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [537.260321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [537.260411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [537.260502] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [537.260592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [537.260682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.260772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.260874] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.260965] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [537.261055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [537.261144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.261234] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.261323] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [537.261411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [537.261499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [537.261589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [537.261682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [537.261772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [537.261872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [537.261966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [537.262058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [537.262150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [537.262435] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B] <7> [537.280900] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [537.281568] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [537.294416] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [537.302899] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B] <7> [537.305204] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [537.306058] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [537.306543] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [537.307033] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [537.307479] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [537.307948] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [537.308345] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [537.308727] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [537.309130] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [537.309483] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [537.309824] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [537.310210] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [537.310555] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [537.310886] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [537.311201] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [537.311491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [537.311772] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [537.312315] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [537.312803] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [537.313267] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [537.314022] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [537.314521] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [537.315000] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [537.315232] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [537.339931] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [537.340782] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [537.341636] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [537.342408] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [537.343129] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [537.469422] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [537.470069] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [537.474802] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [537.479599] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [537.480367] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [537.481248] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [537.482136] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [537.486819] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [537.501389] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [537.503801] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [537.505781] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [537.511286] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [537.513091] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [537.523914] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [537.524130] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [537.524328] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [537.528663] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [537.528672] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [537.528676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [537.528680] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [537.528685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [537.528689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [537.528694] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [537.528700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [537.528705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [537.528711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [537.528715] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [537.528756] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [537.528924] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [537.530529] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [537.530653] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [537.533385] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [537.533848] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [537.533959] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [537.534396] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [537.534484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [537.534489] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [537.534573] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [537.535919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [537.535922] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [537.536006] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [537.536796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [537.536800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [537.536802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [537.536805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [537.536807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [537.536809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [537.536812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [537.536815] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [537.536818] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [537.536821] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [537.536824] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [537.537189] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [537.537272] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [537.537705] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [537.537791] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [537.537803] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [537.541995] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [537.636221] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [537.637211] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [537.638090] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [537.638862] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [537.639642] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [537.689074] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [537.689704] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [537.694482] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [537.699265] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [537.700215] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [537.701015] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [537.701917] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [537.706572] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [537.721104] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [537.723220] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [537.725154] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [537.730581] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [537.732106] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [537.742013] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [537.742237] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [537.742438] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [537.746551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [537.746559] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [537.746564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [537.746568] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [537.746572] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [537.746576] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [537.746581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [537.746587] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [537.746592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [537.746598] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [537.746602] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [537.746643] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [537.746799] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [537.748475] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [537.748610] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [537.751349] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [537.751813] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [537.751898] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [537.752344] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [537.752429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [537.752433] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [537.752520] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [537.753867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [537.753871] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [537.753961] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [537.755014] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [537.755018] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [537.755021] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [537.755023] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [537.755025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [537.755028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [537.755030] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [537.755033] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [537.755036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [537.755039] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [537.755042] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [537.755207] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [537.755292] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [537.755724] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [537.755806] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [537.755818] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [537.760017] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [537.852235] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [537.853281] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [537.854132] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [537.854909] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [537.855725] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [537.921840] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [537.922490] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [537.927393] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [537.931963] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [537.932500] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [537.933215] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [537.933905] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [537.936937] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [537.947287] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [537.948893] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [537.950375] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [537.954371] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [537.955715] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [537.965437] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [537.965747] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [537.965978] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [537.969471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [537.969483] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [537.969489] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [537.969496] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [537.969501] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [537.969506] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [537.969512] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [537.969520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [537.969526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [537.969533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [537.969539] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [537.969590] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [537.969804] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [537.971072] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [537.971383] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [537.973705] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [537.974209] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [537.974340] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [537.974709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [537.974796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [537.974800] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [537.974886] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [537.976133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [537.976136] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [537.976222] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [537.977064] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [537.977068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [537.977070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [537.977072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [537.977075] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [537.977077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [537.977080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [537.977083] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [537.977085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [537.977088] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [537.977091] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [537.977255] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [537.977343] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [537.977665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [537.977751] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [537.977763] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [537.981889] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [538.076286] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [538.077175] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [538.077887] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [538.078554] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [538.079215] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [538.147156] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [538.147775] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [538.152450] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [538.157055] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [538.157774] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [538.158684] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [538.159614] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [538.163996] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.179652] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [538.181985] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.184017] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [538.189547] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [538.191353] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [538.202950] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [538.203209] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [538.203362] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [538.207564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [538.207572] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [538.207577] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [538.207580] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [538.207584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [538.207588] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [538.207593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [538.207598] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [538.207603] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.207608] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [538.207612] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [538.207655] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [538.207865] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [538.209491] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [538.209639] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [538.212390] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [538.212868] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.212983] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [538.213440] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.213525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.213530] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [538.213611] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [538.214950] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.214953] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [538.215050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [538.215843] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [538.215846] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [538.215848] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [538.215850] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [538.215852] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [538.215854] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [538.215856] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [538.215859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [538.215861] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.215864] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [538.215866] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [538.216225] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.216311] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [538.216745] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.216829] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [538.216841] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [538.220998] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [538.316338] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [538.317251] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [538.317991] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [538.318752] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [538.319493] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [538.371715] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [538.372393] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [538.377345] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [538.382182] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [538.382808] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [538.383604] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [538.384341] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [538.388978] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.403269] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [538.405358] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.407293] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [538.412739] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [538.414258] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [538.425121] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [538.425367] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [538.425602] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [538.429947] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [538.429956] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [538.429960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [538.429965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [538.429969] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [538.429973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [538.429978] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [538.429985] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [538.429990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.429995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [538.430000] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [538.430041] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [538.430228] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [538.431848] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [538.431992] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [538.434758] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [538.435238] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.435327] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [538.435764] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.435850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.435854] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [538.435939] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [538.437296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.437299] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [538.437389] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [538.438319] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [538.438323] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [538.438325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [538.438327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [538.438329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [538.438331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [538.438333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [538.438335] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [538.438338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.438340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [538.438342] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [538.438507] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.438600] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [538.439038] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.439135] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [538.439147] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [538.443464] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [538.540359] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [538.541302] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [538.542074] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [538.542874] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [538.543656] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [538.594380] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [538.595027] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [538.599743] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [538.604706] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [538.605761] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [538.606747] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [538.607547] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [538.611982] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.626270] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [538.628380] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.630311] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [538.635736] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [538.637277] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [538.647373] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [538.647594] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [538.647813] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [538.651868] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [538.651877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [538.651881] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [538.651885] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [538.651889] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [538.651893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [538.651898] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [538.651904] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [538.651910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.651915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [538.651919] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [538.651960] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [538.652131] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [538.653746] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [538.653881] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [538.656628] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [538.657098] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.657199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [538.657630] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.657713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.657717] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [538.657799] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [538.659142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.659145] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [538.659236] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [538.660024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [538.660027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [538.660029] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [538.660031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [538.660033] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [538.660035] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [538.660038] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [538.660040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [538.660042] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.660045] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [538.660047] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [538.660410] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.660496] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [538.660927] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.661010] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [538.661022] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [538.665254] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [538.764429] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [538.765424] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [538.766401] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [538.767364] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [538.768333] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [538.822305] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [538.822919] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [538.827574] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [538.832657] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [538.833340] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [538.834245] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [538.835116] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [538.839080] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.849874] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [538.851706] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [538.853200] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [538.857271] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [538.858651] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [538.868573] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [538.868981] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [538.869104] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [538.872745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [538.872752] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [538.872755] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [538.872758] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [538.872761] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [538.872765] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [538.872775] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [538.872787] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [538.872797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.872807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [538.872817] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [538.872889] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [538.873092] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [538.874511] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [538.874816] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [538.877034] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [538.877546] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.877752] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [538.878110] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [538.878209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.878213] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [538.878301] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [538.879538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [538.879541] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [538.879628] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [538.880458] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [538.880461] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [538.880463] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [538.880465] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [538.880467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [538.880469] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [538.880471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [538.880474] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [538.880476] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [538.880479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [538.880481] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [538.880645] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.880730] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [538.881058] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [538.881140] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [538.881158] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [538.885393] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [538.980480] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [538.981398] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [538.982110] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [538.982804] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [538.983512] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [539.047703] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [539.048474] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [539.053121] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [539.057853] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [539.058664] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [539.059609] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [539.060555] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [539.065113] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.079506] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [539.081639] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.083614] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [539.089116] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [539.090985] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [539.101248] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [539.101517] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [539.101773] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [539.106017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [539.106027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [539.106032] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [539.106036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [539.106040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [539.106044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [539.106050] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [539.106055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [539.106060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.106066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [539.106071] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [539.106118] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [539.106308] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [539.107954] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [539.108122] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [539.110909] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [539.111406] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.111528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [539.111999] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.112120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.112125] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [539.112252] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [539.113639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.113644] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [539.113766] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [539.114612] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [539.114616] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [539.114619] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [539.114622] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [539.114625] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [539.114628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [539.114631] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [539.114634] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [539.114637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.114641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [539.114644] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [539.115025] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.115145] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [539.115624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.115744] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [539.115762] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [539.120050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [539.212495] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [539.213404] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [539.214146] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [539.214903] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [539.215645] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [539.271486] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [539.272080] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [539.276719] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [539.281454] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [539.282093] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [539.282979] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [539.283822] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [539.287363] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.298254] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [539.300211] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.301699] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [539.305750] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [539.307082] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [539.316707] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [539.316928] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [539.317186] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [539.321124] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [539.321141] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [539.321151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [539.321159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [539.321167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [539.321175] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [539.321186] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [539.321196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [539.321204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.321213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [539.321220] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [539.321310] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [539.321597] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [539.323160] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [539.323455] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [539.325860] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [539.326344] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.326435] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [539.326763] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.326847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.326851] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [539.326935] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [539.328172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.328176] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [539.328272] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [539.328960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [539.328963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [539.328966] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [539.328968] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [539.328970] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [539.328973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [539.328976] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [539.328979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [539.328981] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.328984] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [539.328987] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [539.329251] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.329337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [539.329662] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.329742] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [539.329754] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [539.333889] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [539.428575] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [539.429502] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [539.430213] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [539.430912] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [539.431618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [539.497530] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [539.498198] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [539.502858] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [539.507644] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [539.508414] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [539.509305] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [539.510193] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [539.515086] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.529572] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [539.531971] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.533938] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [539.539393] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [539.541256] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [539.553548] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [539.553818] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [539.554044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [539.558212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [539.558222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [539.558228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [539.558233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [539.558238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [539.558243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [539.558249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [539.558256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [539.558263] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.558269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [539.558275] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [539.558337] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [539.558527] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [539.560202] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [539.560366] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [539.563153] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [539.563644] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.563744] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [539.564184] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.564271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.564275] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [539.564370] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [539.565710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.565714] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [539.565799] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [539.566720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [539.566723] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [539.566725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [539.566727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [539.566729] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [539.566731] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [539.566733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [539.566736] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [539.566738] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.566741] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [539.566743] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [539.566906] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.566991] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [539.567421] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.567505] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [539.567516] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [539.571726] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [539.668627] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [539.669658] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [539.670513] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [539.671285] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [539.672092] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [539.720541] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [539.721217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [539.726061] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [539.730870] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [539.731641] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [539.732588] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [539.733526] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [539.738808] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.753638] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [539.756165] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.758114] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [539.763410] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [539.765156] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [539.774844] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [539.775017] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [539.775185] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [539.779182] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [539.779189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [539.779193] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [539.779196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [539.779200] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [539.779203] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [539.779207] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [539.779212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [539.779216] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.779221] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [539.779224] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [539.779253] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [539.779404] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [539.781035] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [539.781145] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [539.783848] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [539.784292] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.784387] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [539.784818] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [539.784903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.784908] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [539.784996] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [539.786349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [539.786352] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [539.786439] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [539.787489] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [539.787493] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [539.787495] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [539.787497] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [539.787499] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [539.787502] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [539.787504] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [539.787507] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [539.787509] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [539.787512] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [539.787514] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [539.787674] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.787760] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [539.788194] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [539.788282] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [539.788294] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [539.792421] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [539.884648] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [539.885685] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [539.886534] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [539.887310] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [539.888132] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [539.944639] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [539.945437] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [539.950110] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [539.955179] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [539.956078] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [539.956966] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [539.957826] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [539.962277] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.976622] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [539.978761] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [539.980721] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [539.986136] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [539.987667] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [539.997512] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [539.997758] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [539.998002] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [540.002762] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [540.002771] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [540.002775] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [540.002778] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [540.002782] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [540.002785] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [540.002790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [540.002795] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [540.002799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.002804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [540.002808] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [540.002848] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [540.003024] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [540.004705] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [540.004853] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [540.007605] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [540.008090] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.008211] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [540.008687] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.008807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.008812] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [540.008931] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [540.010320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.010324] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [540.010460] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [540.011303] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [540.011308] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [540.011310] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [540.011313] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [540.011316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [540.011319] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [540.011322] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [540.011325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [540.011329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.011332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [540.011335] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [540.011729] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.011850] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [540.012324] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.012450] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [540.012468] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [540.016736] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [540.108664] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [540.109617] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [540.110429] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [540.111168] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [540.111948] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [540.167665] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [540.168302] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [540.172991] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [540.177700] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [540.178489] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [540.179333] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [540.180266] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [540.185375] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.200022] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [540.202352] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.204339] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [540.209611] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [540.211431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [540.222610] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [540.222869] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [540.223103] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [540.227305] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [540.227315] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [540.227320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [540.227325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [540.227329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [540.227334] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [540.227340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [540.227346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [540.227352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.227358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [540.227363] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [540.227425] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [540.227602] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [540.229214] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [540.229365] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [540.232147] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [540.232636] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.232728] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [540.233174] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.233269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.233273] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [540.233357] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [540.234721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.234725] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [540.234811] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [540.235886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [540.235890] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [540.235893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [540.235897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [540.235901] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [540.235904] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [540.235908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [540.235913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [540.235917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.235922] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [540.235926] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [540.236092] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.236181] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [540.236624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.236738] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [540.236751] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [540.240981] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [540.332740] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [540.333761] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [540.334750] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [540.335700] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [540.336660] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [540.391808] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [540.392407] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [540.397196] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [540.401856] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [540.402615] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [540.403476] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [540.404359] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [540.409272] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.423797] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [540.426225] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.428232] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [540.433763] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [540.435576] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [540.447541] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [540.447796] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [540.448016] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [540.452188] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [540.452196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [540.452200] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [540.452204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [540.452208] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [540.452212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [540.452217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [540.452223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [540.452228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.452233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [540.452237] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [540.452284] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [540.452516] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [540.454172] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [540.454341] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [540.457146] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [540.457650] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.457749] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [540.458187] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.458271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.458275] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [540.458358] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [540.459704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.459707] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [540.459791] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [540.461206] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [540.461211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [540.461213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [540.461215] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [540.461217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [540.461219] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [540.461221] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [540.461224] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [540.461227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.461230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [540.461232] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [540.461396] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.461495] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [540.461932] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.462018] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [540.462031] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [540.466258] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [540.564744] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [540.565671] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [540.566440] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [540.567220] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [540.567995] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [540.615875] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [540.616551] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [540.621331] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [540.626064] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [540.626839] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [540.627683] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [540.628624] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [540.633301] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.647576] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [540.649904] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.651836] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [540.657257] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [540.659044] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [540.669080] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [540.669276] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [540.669471] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [540.673617] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [540.673625] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [540.673629] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [540.673633] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [540.673637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [540.673641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [540.673646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [540.673651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [540.673656] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.673661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [540.673665] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [540.673703] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [540.673859] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [540.675494] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [540.675621] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [540.678361] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [540.678816] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.678913] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [540.679352] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.679442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.679446] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [540.679544] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [540.680897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.680900] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [540.680985] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [540.681906] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [540.681909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [540.681911] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [540.681913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [540.681915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [540.681917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [540.681919] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [540.681922] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [540.681924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.681927] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [540.681929] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [540.682094] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.682181] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [540.682611] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.682697] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [540.682709] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [540.686839] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [540.780778] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [540.781765] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [540.782571] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [540.783308] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [540.784087] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [540.837542] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [540.838125] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [540.842870] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [540.847384] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [540.848048] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [540.848907] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [540.849797] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [540.853662] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.864414] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [540.866313] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.867785] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [540.871894] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [540.873274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [540.883117] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [540.883272] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [540.883608] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [540.887604] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [540.887620] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [540.887628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [540.887635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [540.887642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [540.887649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [540.887658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03 <7> [540.887667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [540.887676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.887685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [540.887694] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT <7> [540.887769] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [540.888121] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [540.889445] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [540.889786] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [540.892124] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [540.892633] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.892730] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [540.893054] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [540.893146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.893150] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [540.893235] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [540.894472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [540.894475] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [540.894571] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [540.895244] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [540.895247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [540.895249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [540.895251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [540.895253] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [540.895255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [540.895257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03 <7> [540.895260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [540.895262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [540.895264] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [540.895267] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT <7> [540.895523] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.895624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [540.895950] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [540.896033] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [540.896045] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [540.900153] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [540.904810] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.904923] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [540.905023] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000 <7> [540.905125] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.905232] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.905332] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [540.905426] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.905524] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [540.905638] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [540.905734] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [540.905835] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [540.905932] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [540.906063] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [540.906142] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [540.906312] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.906418] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [540.906515] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000 <7> [540.906638] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.906743] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.906843] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [540.906936] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.907033] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [540.907130] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [540.907230] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [540.907331] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [540.907427] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [540.907542] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [540.907619] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [540.907779] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.907880] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [540.907976] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000 <7> [540.908069] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.908171] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.908265] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [540.908356] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.908456] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [540.908565] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [540.908665] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [540.908762] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [540.908862] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [540.908972] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [540.909050] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [540.909143] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [540.909216] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [540.909288] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [540.909360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [540.909431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [540.909505] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [540.909607] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1 <7> [540.909709] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [540.909806] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [540.909903] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [540.910012] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [540.910122] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [540.910218] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [540.910314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [540.910412] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [540.910508] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [540.910612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [540.910706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [540.910797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [540.910890] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [540.910984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7208960, data_n: 8388608, link_m: 480597, link_n: 524288, tu: 64 <7> [540.911079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [540.911172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [540.911264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [540.911354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [540.911444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [540.911542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [540.911634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [540.911730] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [540.911823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [540.911916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [540.912008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [540.912100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [540.912192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [540.912282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [540.912374] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [540.912464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [540.912564] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [540.912655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [540.912747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 162000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [540.912839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [540.912928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [540.913018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [540.913108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [540.913199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [540.913295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 162000 <7> [540.913389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [540.913480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [540.913579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x50a8 <7> [540.913672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2120 <7> [540.913763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcd9a <7> [540.913852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [540.913943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x5ab8 <7> [540.914031] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x4c34 <7> [540.914119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [540.914215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [540.914308] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x6000 <7> [540.914398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [540.914488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [540.914585] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x40, hdmi rate: 0x00 <7> [540.914676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [540.914766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [540.914857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [540.914946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.915036] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.915125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.915218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [540.915317] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [540.915413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.915511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.915622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.915721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [540.915819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [540.915917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [540.916013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [540.916107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [540.916200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [540.916290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [540.916379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [540.916469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [540.916571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [540.916672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [fastset] <7> [540.916770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [540.916865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [540.916959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [540.917053] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [540.917147] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [540.917240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [540.917333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [540.917425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [540.917517] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [540.917518] xe 0000:03:00.0: colorspace: RGB <7> [540.917519] xe 0000:03:00.0: scan mode: Underscan <7> [540.917520] xe 0000:03:00.0: colorimetry: No Data <7> [540.917522] xe 0000:03:00.0: picture aspect: 16:9 <7> [540.917523] xe 0000:03:00.0: active aspect: Same as Picture <7> [540.917524] xe 0000:03:00.0: itc: No Data <7> [540.917525] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [540.917526] xe 0000:03:00.0: quantization range: Default <7> [540.917527] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [540.917531] xe 0000:03:00.0: video code: 16 <7> [540.917532] xe 0000:03:00.0: ycc quantization range: Full <7> [540.917534] xe 0000:03:00.0: hdmi content type: Graphics <7> [540.917535] xe 0000:03:00.0: pixel repeat: 0 <7> [540.917536] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [540.917538] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [540.917539] xe 0000:03:00.0: vendor: Intel <7> [540.917540] xe 0000:03:00.0: product: Discrete gfx <7> [540.917542] xe 0000:03:00.0: source device information: PC General (0x9) <7> [540.917543] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [540.917545] xe 0000:03:00.0: empty frame <7> [540.917546] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [540.917644] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [540.917741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [540.917843] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [540.917940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [540.918038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [540.918139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [540.918237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [540.918332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [540.918426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [540.918524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [540.918642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [540.918758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [540.918858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [540.918953] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [540.919047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [540.919138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [540.919229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [540.919320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625 <7> [540.919411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [540.919501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [540.919604] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0 <7> [540.919694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [540.919784] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06 <7> [540.919873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [540.919962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [540.920050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [540.920140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [540.920228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [540.920317] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00 <7> [540.920405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [540.920493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [540.920594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [540.920690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [540.920783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [540.920876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [540.920968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.921059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.921150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.921240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [540.921331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [540.921421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.921510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.921608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [540.921698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [540.921789] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [540.921878] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [540.921968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [540.922380] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [540.922518] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [540.922682] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [540.922770] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [540.922853] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [540.922934] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [540.923013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [540.923097] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [540.923178] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [540.923258] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [540.923337] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [540.923414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [540.923491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [540.923577] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [540.923657] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [540.923737] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [540.923814] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [540.923891] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [540.924182] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [540.924341] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [540.924623] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [540.924731] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [540.924825] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [540.929643] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.934383] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [540.935401] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [540.935778] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 06 <7> [540.937283] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [540.937797] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [540.945433] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [540.945554] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [540.952429] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [540.952590] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 162000, lane count = 4 <7> [540.953847] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [540.971500] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD <7> [540.988091] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [540.988786] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [540.992605] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [540.993153] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [540.994312] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.994657] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [540.994911] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.995195] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [540.995485] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [540.995812] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [540.995918] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [540.996087] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [540.996428] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [540.996689] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [540.996890] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [540.997237] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.997477] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [540.997691] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.997914] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [540.998135] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [540.998343] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [540.998556] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [540.998849] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [540.999052] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [540.999230] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [540.999415] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [540.999611] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [540.999791] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [540.999964] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [541.000156] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [541.000304] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [541.000430] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [541.000717] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36) <7> [541.000879] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [541.001016] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [541.001168] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [541.001313] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [541.001457] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [541.001607] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [541.001759] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [541.001874] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [541.001980] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [541.002115] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [541.002214] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [541.002309] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [541.002402] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [541.002491] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [541.002591] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [541.002685] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [541.002774] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [541.002875] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1 <7> [541.002999] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [541.003119] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [541.003230] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [541.003352] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [541.003472] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [541.003582] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [541.003681] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [541.003787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [541.003894] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [541.003996] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [541.004095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [541.004192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [541.004290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [541.004380] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [541.004472] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [541.004576] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [541.004579] xe 0000:03:00.0: colorspace: RGB <7> [541.004581] xe 0000:03:00.0: scan mode: Underscan <7> [541.004583] xe 0000:03:00.0: colorimetry: No Data <7> [541.004586] xe 0000:03:00.0: picture aspect: 16:9 <7> [541.004588] xe 0000:03:00.0: active aspect: Same as Picture <7> [541.004590] xe 0000:03:00.0: itc: No Data <7> [541.004591] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [541.004592] xe 0000:03:00.0: quantization range: Default <7> [541.004593] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [541.004594] xe 0000:03:00.0: video code: 16 <7> [541.004595] xe 0000:03:00.0: ycc quantization range: Full <7> [541.004596] xe 0000:03:00.0: hdmi content type: Graphics <7> [541.004597] xe 0000:03:00.0: pixel repeat: 0 <7> [541.004598] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [541.004600] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [541.004601] xe 0000:03:00.0: vendor: Intel <7> [541.004602] xe 0000:03:00.0: product: Discrete gfx <7> [541.004603] xe 0000:03:00.0: source device information: PC General (0x9) <7> [541.004604] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [541.004606] xe 0000:03:00.0: empty frame <7> [541.004607] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [541.004703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [541.004796] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [541.004888] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [541.004980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [541.005070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [541.005162] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [541.005252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [541.005342] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [541.005433] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [541.005524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [541.005623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [541.005715] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [541.005805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [541.005896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [541.005985] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [541.006074] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [541.006163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [541.006252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625 <7> [541.006344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [541.006439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [541.006530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0 <7> [541.006637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [541.006728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06 <7> [541.006818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [541.006907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [541.006998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [541.007087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [541.007178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [541.007266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00 <7> [541.007356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [541.007446] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [541.007535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [541.007634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [541.007722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [541.007813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [541.007903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [541.007992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [541.008081] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [541.008170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [541.008259] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [541.008347] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [541.008435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [541.008523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [541.008635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [541.008724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [541.008814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [541.008904] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [541.008993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [541.009081] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [541.009169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [541.009257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [541.009346] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [541.009434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [541.010338] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [541.010493] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [541.010591] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [541.010675] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [541.010758] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [541.010843] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [541.010924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [541.011004] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [541.011081] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [541.011159] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [541.011236] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [541.011312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [541.011392] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [541.011473] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [541.011556] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [541.011634] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [541.011712] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [541.021039] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [541.021352] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [541.037727] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B] <7> [541.037921] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [541.040505] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [541.059187] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD <7> [541.060786] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [541.072554] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [541.076081] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [541.076770] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [541.077769] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [541.078500] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <6> [541.084691] [IGT] xe_pm: finished subtest d3hot-basic-exec, SUCCESS <7> [541.105682] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [541.107046] [IGT] xe_pm: exiting, ret=0 <6> [541.127073] Console: switching to colour frame buffer device 240x67

<6> [536.113405] Console: switching to colour dummy device 80x25

<6> [536.226653] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [536.226714] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [536.226722] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [536.226730] nvme 0000:05:00.0: [ 0] RxErr (First)

<7> [536.548289] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [536.660041] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<6> [536.662796] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [536.662827] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [536.662839] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [536.662854] nvme 0000:05:00.0: [ 0] RxErr (First)

<6> [537.163644] [IGT] xe_pm: starting subtest d3hot-basic-exec

<7> [537.166194] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.166308] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [537.166399] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000

<7> [537.166491] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.166588] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.166676] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [537.166760] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.166857] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [537.166974] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [537.167089] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [537.167180] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [537.167268] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [537.167477] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.167595] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [537.167683] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000

<7> [537.167775] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.167896] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.168000] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [537.168086] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.168176] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [537.168266] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [537.168353] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [537.168441] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [537.168532] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [537.168671] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [537.168743] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [537.168819] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [537.169018] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.169118] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [537.169204] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000

<7> [537.169289] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.169383] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.169500] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [537.169585] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.169682] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [537.169780] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [537.169890] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [537.169993] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [537.170079] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [537.170180] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [537.170251] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [537.170352] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [537.170443] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [537.170517] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [537.170581] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [537.170651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [537.170714] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [537.170777] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [537.170847] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [537.170921] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [537.171004] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [537.171119] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [537.171206] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [537.171299] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [537.171405] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [537.171505] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [537.171591] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [537.171679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [537.171770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [537.171898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [537.171998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [537.172095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [537.172185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [537.172273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [537.172359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7208960, data_n: 8388608, link_m: 480597, link_n: 524288, tu: 64

<7> [537.172444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [537.172540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [537.172635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [537.172727] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [537.172816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [537.172932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [537.173030] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [537.173118] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [537.173200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [537.173312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [537.173397] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [537.173488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [537.173575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [537.173662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [537.173747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [537.173831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [537.173935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [537.174044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [537.174149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 162000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [537.174242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [537.174326] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [537.174415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [537.174496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [537.174576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [537.174659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 162000

<7> [537.174763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [537.174852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [537.174950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x50a8

<7> [537.175034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2120

<7> [537.175122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcd9a

<7> [537.175204] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [537.175285] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x5ab8

<7> [537.175373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x4c34

<7> [537.175481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [537.175573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [537.175657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x6000

<7> [537.175747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [537.175844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [537.175939] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x40, hdmi rate: 0x00

<7> [537.176027] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [537.176137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [537.176222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [537.176312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.176397] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.176484] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.176566] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [537.176648] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [537.176731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.176835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.176944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.177050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [537.177151] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [537.177245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [537.177339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [537.177431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [537.177549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [537.177639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [537.177735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [537.177828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [537.177951] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [fastset]

<7> [537.178048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [537.178142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [537.178258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [537.178354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [537.178453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [537.178549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [537.178641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [537.178733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [537.178824] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [537.178827] xe 0000:03:00.0: scan mode: Underscan

<7> [537.178828] xe 0000:03:00.0: colorimetry: No Data

<7> [537.178829] xe 0000:03:00.0: picture aspect: 16:9

<7> [537.178830] xe 0000:03:00.0: active aspect: Same as Picture

<7> [537.178832] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [537.178833] xe 0000:03:00.0: quantization range: Default

<7> [537.178834] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [537.178837] xe 0000:03:00.0: ycc quantization range: Full

<7> [537.178845] xe 0000:03:00.0: hdmi content type: Graphics

<7> [537.178847] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [537.178849] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [537.178852] xe 0000:03:00.0: product: Discrete gfx

<7> [537.178853] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [537.178855] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [537.178857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [537.178948] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [537.179070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [537.179168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [537.179270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [537.179369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [537.179467] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [537.179560] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [537.179653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [537.179745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [537.179836] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [537.179967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [537.180061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [537.180160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [537.180256] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [537.180349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [537.180444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [537.180537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [537.180642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625

<7> [537.180752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [537.180859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [537.180949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0

<7> [537.181047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [537.181136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06

<7> [537.181226] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [537.181316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [537.181433] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [537.181524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [537.181620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [537.181712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00

<7> [537.181801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [537.181935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [537.182024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [537.182144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [537.182236] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [537.182329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [537.182431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.182532] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.182626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.182717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [537.182807] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [537.182921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.183026] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.183124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.183219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [537.183319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [537.183410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [537.183501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [537.183592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [537.183713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [537.184239] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A]

<7> [537.210215] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [537.210869] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [537.231787] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [537.234967] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [537.235097] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [537.236035] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [537.237342] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [537.238205] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [537.238636] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [537.239072] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [537.239427] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [537.239762] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [537.240132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [537.240548] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [537.241016] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [537.241361] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [537.241669] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [537.241978] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [537.242250] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [537.242625] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [537.242980] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [537.243247] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [537.243505] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [537.245383] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [537.245778] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [537.247709] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [537.248228] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [537.248446] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [537.249161] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [537.249535] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<7> [537.252686] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.252819] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [537.252951] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.253066] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [537.253180] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [537.253286] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [537.253391] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [537.253516] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [537.253598] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [537.253725] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.253832] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [537.253936] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.254035] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [537.254132] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [537.254226] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [537.254322] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [537.254459] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [537.254560] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [537.254650] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [537.254749] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [537.254849] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [537.254958] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [537.255053] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [537.255159] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [537.255237] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [537.255327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [537.255405] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [537.255478] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [537.255550] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [537.255620] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [537.255688] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [537.255772] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0

<7> [537.255881] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [537.255980] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [537.256076] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [537.256202] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [537.256309] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [537.256407] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [537.256500] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [537.256597] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [537.256696] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [537.256795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [537.256907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [537.257001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [537.257093] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [537.257183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [537.257274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [537.257364] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [537.257367] xe 0000:03:00.0: scan mode: Underscan

<7> [537.257368] xe 0000:03:00.0: colorimetry: No Data

<7> [537.257370] xe 0000:03:00.0: picture aspect: 16:9

<7> [537.257371] xe 0000:03:00.0: active aspect: Same as Picture

<7> [537.257374] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [537.257375] xe 0000:03:00.0: quantization range: Default

<7> [537.257376] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [537.257379] xe 0000:03:00.0: ycc quantization range: Full

<7> [537.257380] xe 0000:03:00.0: hdmi content type: Graphics

<7> [537.257382] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [537.257384] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [537.257387] xe 0000:03:00.0: product: Discrete gfx

<7> [537.257389] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [537.257390] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [537.257393] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [537.257482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [537.257573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [537.257664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [537.257753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [537.257842] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [537.257944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [537.258033] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [537.258124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [537.258213] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [537.258304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [537.258395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [537.258485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [537.258577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [537.258667] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [537.258758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [537.258848] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [537.258952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [537.259044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625

<7> [537.259132] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [537.259221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [537.259312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0

<7> [537.259402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [537.259494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06

<7> [537.259583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [537.259674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [537.259764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [537.259858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [537.259949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [537.260038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00

<7> [537.260132] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [537.260228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [537.260321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [537.260411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [537.260502] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [537.260592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [537.260682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.260772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.260874] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.260965] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [537.261055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [537.261144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.261234] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.261323] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [537.261411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [537.261499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [537.261589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [537.261682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [537.261772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [537.261872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [537.261966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [537.262058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [537.262150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [537.262435] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B]

<7> [537.280900] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [537.281568] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [537.294416] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [537.302899] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B]

<7> [537.305204] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [537.306058] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [537.306543] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [537.307033] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [537.307479] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [537.307948] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [537.308345] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [537.308727] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [537.309130] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [537.309483] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [537.309824] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [537.310210] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [537.310555] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [537.310886] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [537.311201] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [537.311491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [537.311772] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [537.312315] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [537.312803] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [537.313267] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [537.314022] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [537.314521] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [537.315000] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [537.315232] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<7> [537.339931] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [537.340782] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [537.341636] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [537.342408] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [537.343129] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [537.469422] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [537.470069] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [537.474802] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [537.479599] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [537.480367] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [537.481248] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [537.482136] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [537.486819] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [537.501389] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [537.503801] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [537.505781] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [537.511286] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [537.513091] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [537.523914] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [537.524130] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [537.524328] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [537.528663] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [537.528672] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [537.528676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [537.528680] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [537.528685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [537.528689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [537.528694] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [537.528700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [537.528705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [537.528711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [537.528715] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [537.528756] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [537.528924] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [537.530529] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [537.530653] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [537.533385] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [537.533848] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [537.533959] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [537.534396] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [537.534484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [537.534489] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [537.534573] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [537.535919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [537.535922] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [537.536006] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [537.536796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [537.536800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [537.536802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [537.536805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [537.536807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [537.536809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [537.536812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [537.536815] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [537.536818] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [537.536821] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [537.536824] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [537.537189] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [537.537272] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [537.537705] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [537.537791] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [537.537803] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [537.541995] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [537.636221] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [537.637211] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [537.638090] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [537.638862] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [537.639642] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [537.689074] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [537.689704] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [537.694482] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [537.699265] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [537.700215] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [537.701015] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [537.701917] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [537.706572] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [537.721104] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [537.723220] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [537.725154] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [537.730581] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [537.732106] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [537.742013] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [537.742237] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [537.742438] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [537.746551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [537.746559] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [537.746564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [537.746568] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [537.746572] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [537.746576] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [537.746581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [537.746587] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [537.746592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [537.746598] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [537.746602] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [537.746643] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [537.746799] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [537.748475] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [537.748610] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [537.751349] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [537.751813] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [537.751898] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [537.752344] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [537.752429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [537.752433] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [537.752520] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [537.753867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [537.753871] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [537.753961] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [537.755014] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [537.755018] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [537.755021] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [537.755023] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [537.755025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [537.755028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [537.755030] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [537.755033] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [537.755036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [537.755039] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [537.755042] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [537.755207] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [537.755292] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [537.755724] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [537.755806] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [537.755818] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [537.760017] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [537.852235] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [537.853281] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [537.854132] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [537.854909] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [537.855725] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [537.921840] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [537.922490] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [537.927393] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [537.931963] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [537.932500] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [537.933215] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [537.933905] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [537.936937] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [537.947287] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [537.948893] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [537.950375] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [537.954371] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [537.955715] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [537.965437] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [537.965747] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [537.965978] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [537.969471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [537.969483] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [537.969489] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [537.969496] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [537.969501] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [537.969506] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [537.969512] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [537.969520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [537.969526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [537.969533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [537.969539] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [537.969590] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [537.969804] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [537.971072] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [537.971383] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [537.973705] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [537.974209] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [537.974340] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [537.974709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [537.974796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [537.974800] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [537.974886] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [537.976133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [537.976136] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [537.976222] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [537.977064] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [537.977068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [537.977070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [537.977072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [537.977075] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [537.977077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [537.977080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [537.977083] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [537.977085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [537.977088] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [537.977091] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [537.977255] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [537.977343] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [537.977665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [537.977751] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [537.977763] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [537.981889] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [538.076286] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [538.077175] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [538.077887] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [538.078554] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [538.079215] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [538.147156] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [538.147775] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [538.152450] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [538.157055] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [538.157774] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [538.158684] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [538.159614] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [538.163996] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.179652] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [538.181985] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.184017] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [538.189547] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [538.191353] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [538.202950] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [538.203209] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [538.203362] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [538.207564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [538.207572] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [538.207577] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [538.207580] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [538.207584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [538.207588] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [538.207593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [538.207598] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [538.207603] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.207608] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [538.207612] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [538.207655] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [538.207865] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [538.209491] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [538.209639] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [538.212390] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [538.212868] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.212983] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [538.213440] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.213525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.213530] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [538.213611] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [538.214950] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.214953] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [538.215050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [538.215843] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [538.215846] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [538.215848] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [538.215850] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [538.215852] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [538.215854] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [538.215856] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [538.215859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [538.215861] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.215864] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [538.215866] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [538.216225] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.216311] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [538.216745] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.216829] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [538.216841] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [538.220998] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [538.316338] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [538.317251] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [538.317991] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [538.318752] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [538.319493] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [538.371715] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [538.372393] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [538.377345] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [538.382182] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [538.382808] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [538.383604] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [538.384341] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [538.388978] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.403269] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [538.405358] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.407293] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [538.412739] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [538.414258] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [538.425121] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [538.425367] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [538.425602] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [538.429947] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [538.429956] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [538.429960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [538.429965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [538.429969] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [538.429973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [538.429978] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [538.429985] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [538.429990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.429995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [538.430000] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [538.430041] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [538.430228] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [538.431848] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [538.431992] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [538.434758] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [538.435238] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.435327] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [538.435764] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.435850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.435854] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [538.435939] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [538.437296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.437299] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [538.437389] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [538.438319] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [538.438323] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [538.438325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [538.438327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [538.438329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [538.438331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [538.438333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [538.438335] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [538.438338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.438340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [538.438342] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [538.438507] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.438600] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [538.439038] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.439135] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [538.439147] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [538.443464] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [538.540359] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [538.541302] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [538.542074] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [538.542874] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [538.543656] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [538.594380] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [538.595027] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [538.599743] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [538.604706] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [538.605761] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [538.606747] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [538.607547] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [538.611982] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.626270] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [538.628380] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.630311] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [538.635736] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [538.637277] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [538.647373] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [538.647594] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [538.647813] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [538.651868] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [538.651877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [538.651881] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [538.651885] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [538.651889] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [538.651893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [538.651898] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [538.651904] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [538.651910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.651915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [538.651919] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [538.651960] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [538.652131] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [538.653746] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [538.653881] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [538.656628] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [538.657098] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.657199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [538.657630] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.657713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.657717] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [538.657799] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [538.659142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.659145] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [538.659236] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [538.660024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [538.660027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [538.660029] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [538.660031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [538.660033] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [538.660035] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [538.660038] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [538.660040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [538.660042] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.660045] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [538.660047] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [538.660410] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.660496] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [538.660927] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.661010] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [538.661022] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [538.665254] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [538.764429] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [538.765424] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [538.766401] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [538.767364] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [538.768333] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [538.822305] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [538.822919] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [538.827574] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [538.832657] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [538.833340] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [538.834245] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [538.835116] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [538.839080] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.849874] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [538.851706] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [538.853200] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [538.857271] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [538.858651] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [538.868573] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [538.868981] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [538.869104] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [538.872745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [538.872752] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [538.872755] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [538.872758] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [538.872761] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [538.872765] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [538.872775] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [538.872787] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [538.872797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.872807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [538.872817] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [538.872889] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [538.873092] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [538.874511] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [538.874816] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [538.877034] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [538.877546] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.877752] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [538.878110] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [538.878209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.878213] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [538.878301] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [538.879538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [538.879541] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [538.879628] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [538.880458] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [538.880461] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [538.880463] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [538.880465] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [538.880467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [538.880469] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [538.880471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [538.880474] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [538.880476] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [538.880479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [538.880481] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [538.880645] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.880730] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [538.881058] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [538.881140] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [538.881158] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [538.885393] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [538.980480] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [538.981398] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [538.982110] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [538.982804] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [538.983512] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [539.047703] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [539.048474] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [539.053121] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [539.057853] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [539.058664] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [539.059609] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [539.060555] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [539.065113] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.079506] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [539.081639] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.083614] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [539.089116] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [539.090985] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [539.101248] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [539.101517] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [539.101773] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [539.106017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [539.106027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [539.106032] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [539.106036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [539.106040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [539.106044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [539.106050] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [539.106055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [539.106060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.106066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [539.106071] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [539.106118] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [539.106308] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [539.107954] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [539.108122] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [539.110909] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [539.111406] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.111528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [539.111999] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.112120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.112125] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [539.112252] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [539.113639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.113644] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [539.113766] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [539.114612] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [539.114616] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [539.114619] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [539.114622] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [539.114625] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [539.114628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [539.114631] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [539.114634] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [539.114637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.114641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [539.114644] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [539.115025] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.115145] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [539.115624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.115744] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [539.115762] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [539.120050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [539.212495] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [539.213404] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [539.214146] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [539.214903] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [539.215645] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [539.271486] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [539.272080] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [539.276719] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [539.281454] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [539.282093] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [539.282979] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [539.283822] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [539.287363] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.298254] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [539.300211] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.301699] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [539.305750] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [539.307082] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [539.316707] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [539.316928] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [539.317186] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [539.321124] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [539.321141] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [539.321151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [539.321159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [539.321167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [539.321175] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [539.321186] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [539.321196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [539.321204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.321213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [539.321220] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [539.321310] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [539.321597] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [539.323160] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [539.323455] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [539.325860] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [539.326344] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.326435] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [539.326763] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.326847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.326851] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [539.326935] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [539.328172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.328176] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [539.328272] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [539.328960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [539.328963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [539.328966] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [539.328968] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [539.328970] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [539.328973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [539.328976] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [539.328979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [539.328981] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.328984] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [539.328987] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [539.329251] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.329337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [539.329662] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.329742] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [539.329754] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [539.333889] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [539.428575] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [539.429502] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [539.430213] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [539.430912] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [539.431618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [539.497530] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [539.498198] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [539.502858] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [539.507644] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [539.508414] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [539.509305] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [539.510193] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [539.515086] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.529572] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [539.531971] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.533938] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [539.539393] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [539.541256] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [539.553548] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [539.553818] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [539.554044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [539.558212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [539.558222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [539.558228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [539.558233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [539.558238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [539.558243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [539.558249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [539.558256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [539.558263] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.558269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [539.558275] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [539.558337] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [539.558527] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [539.560202] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [539.560366] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [539.563153] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [539.563644] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.563744] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [539.564184] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.564271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.564275] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [539.564370] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [539.565710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.565714] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [539.565799] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [539.566720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [539.566723] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [539.566725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [539.566727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [539.566729] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [539.566731] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [539.566733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [539.566736] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [539.566738] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.566741] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [539.566743] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [539.566906] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.566991] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [539.567421] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.567505] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [539.567516] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [539.571726] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [539.668627] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [539.669658] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [539.670513] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [539.671285] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [539.672092] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [539.720541] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [539.721217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [539.726061] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [539.730870] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [539.731641] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [539.732588] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [539.733526] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [539.738808] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.753638] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [539.756165] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.758114] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [539.763410] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [539.765156] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [539.774844] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [539.775017] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [539.775185] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [539.779182] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [539.779189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [539.779193] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [539.779196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [539.779200] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [539.779203] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [539.779207] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [539.779212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [539.779216] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.779221] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [539.779224] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [539.779253] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [539.779404] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [539.781035] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [539.781145] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [539.783848] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [539.784292] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.784387] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [539.784818] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [539.784903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.784908] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [539.784996] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [539.786349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [539.786352] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [539.786439] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [539.787489] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [539.787493] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [539.787495] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [539.787497] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [539.787499] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [539.787502] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [539.787504] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [539.787507] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [539.787509] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [539.787512] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [539.787514] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [539.787674] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.787760] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [539.788194] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [539.788282] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [539.788294] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [539.792421] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [539.884648] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [539.885685] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [539.886534] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [539.887310] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [539.888132] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [539.944639] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [539.945437] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [539.950110] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [539.955179] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [539.956078] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [539.956966] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [539.957826] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [539.962277] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.976622] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [539.978761] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [539.980721] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [539.986136] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [539.987667] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [539.997512] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [539.997758] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [539.998002] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [540.002762] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [540.002771] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [540.002775] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [540.002778] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [540.002782] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [540.002785] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [540.002790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [540.002795] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [540.002799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.002804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [540.002808] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [540.002848] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [540.003024] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [540.004705] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [540.004853] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [540.007605] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [540.008090] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.008211] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [540.008687] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.008807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.008812] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [540.008931] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [540.010320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.010324] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [540.010460] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [540.011303] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [540.011308] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [540.011310] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [540.011313] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [540.011316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [540.011319] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [540.011322] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [540.011325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [540.011329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.011332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [540.011335] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [540.011729] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.011850] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [540.012324] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.012450] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [540.012468] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [540.016736] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [540.108664] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [540.109617] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [540.110429] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [540.111168] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [540.111948] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [540.167665] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [540.168302] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [540.172991] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [540.177700] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [540.178489] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [540.179333] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [540.180266] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [540.185375] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.200022] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [540.202352] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.204339] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [540.209611] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [540.211431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [540.222610] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [540.222869] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [540.223103] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [540.227305] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [540.227315] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [540.227320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [540.227325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [540.227329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [540.227334] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [540.227340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [540.227346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [540.227352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.227358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [540.227363] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [540.227425] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [540.227602] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [540.229214] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [540.229365] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [540.232147] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [540.232636] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.232728] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [540.233174] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.233269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.233273] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [540.233357] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [540.234721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.234725] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [540.234811] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [540.235886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [540.235890] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [540.235893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [540.235897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [540.235901] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [540.235904] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [540.235908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [540.235913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [540.235917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.235922] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [540.235926] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [540.236092] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.236181] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [540.236624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.236738] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [540.236751] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [540.240981] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [540.332740] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [540.333761] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [540.334750] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [540.335700] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [540.336660] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [540.391808] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [540.392407] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [540.397196] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [540.401856] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [540.402615] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [540.403476] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [540.404359] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [540.409272] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.423797] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [540.426225] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.428232] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [540.433763] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [540.435576] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [540.447541] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [540.447796] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [540.448016] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [540.452188] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [540.452196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [540.452200] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [540.452204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [540.452208] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [540.452212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [540.452217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [540.452223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [540.452228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.452233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [540.452237] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [540.452284] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [540.452516] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [540.454172] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [540.454341] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [540.457146] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [540.457650] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.457749] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [540.458187] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.458271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.458275] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [540.458358] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [540.459704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.459707] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [540.459791] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [540.461206] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [540.461211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [540.461213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [540.461215] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [540.461217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [540.461219] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [540.461221] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [540.461224] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [540.461227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.461230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [540.461232] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [540.461396] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.461495] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [540.461932] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.462018] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [540.462031] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [540.466258] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [540.564744] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [540.565671] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [540.566440] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [540.567220] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [540.567995] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [540.615875] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [540.616551] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [540.621331] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [540.626064] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [540.626839] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [540.627683] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [540.628624] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [540.633301] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.647576] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [540.649904] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.651836] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [540.657257] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [540.659044] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [540.669080] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [540.669276] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [540.669471] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [540.673617] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [540.673625] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [540.673629] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [540.673633] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [540.673637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [540.673641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [540.673646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [540.673651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [540.673656] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.673661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [540.673665] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [540.673703] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [540.673859] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [540.675494] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [540.675621] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [540.678361] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [540.678816] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.678913] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [540.679352] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.679442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.679446] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [540.679544] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [540.680897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.680900] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [540.680985] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [540.681906] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [540.681909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [540.681911] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [540.681913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [540.681915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [540.681917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [540.681919] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [540.681922] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [540.681924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.681927] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [540.681929] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [540.682094] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.682181] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [540.682611] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.682697] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [540.682709] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [540.686839] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [540.780778] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [540.781765] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [540.782571] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [540.783308] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [540.784087] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [540.837542] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [540.838125] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [540.842870] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [540.847384] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [540.848048] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [540.848907] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [540.849797] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [540.853662] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.864414] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [540.866313] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.867785] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [540.871894] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [540.873274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [540.883117] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [540.883272] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [540.883608] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [540.887604] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [540.887620] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [540.887628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [540.887635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [540.887642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [540.887649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [540.887658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] DisplayID extension version 0x10, primary use 0x03

<7> [540.887667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [540.887676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.887685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [540.887694] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:525:DP-2] tile cap 0x9, size 1920x1080, num tiles 2x1, location 0x0, vend IGT

<7> [540.887769] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [540.888121] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [540.889445] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [540.889786] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [540.892124] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [540.892633] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.892730] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [540.893054] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [540.893146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.893150] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [540.893235] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [540.894472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [540.894475] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [540.894571] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [540.895244] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [540.895247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [540.895249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [540.895251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [540.895253] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [540.895255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [540.895257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] DisplayID extension version 0x10, primary use 0x03

<7> [540.895260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [540.895262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [540.895264] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [540.895267] xe 0000:03:00.0: [drm:drm_edid_connector_update] [CONNECTOR:537:HDMI-A-3] tile cap 0x9, size 1920x1080, num tiles 2x1, location 1x0, vend IGT

<7> [540.895523] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.895624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [540.895950] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [540.896033] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [540.896045] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [540.900153] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [540.904810] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.904923] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [540.905023] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000

<7> [540.905125] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.905232] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.905332] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [540.905426] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.905524] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [540.905638] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [540.905734] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [540.905835] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [540.905932] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [540.906063] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [540.906142] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [540.906312] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.906418] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [540.906515] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000

<7> [540.906638] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.906743] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.906843] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [540.906936] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.907033] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [540.907130] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [540.907230] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [540.907331] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [540.907427] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [540.907542] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [540.907619] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [540.907779] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:525:DP-2] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.907880] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [540.907976] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 162000 bpp input 30 compressed 0.0000 link rate required 556875 available 648000

<7> [540.908069] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.908171] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.908265] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [540.908356] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.908456] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [540.908565] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [540.908665] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [540.908762] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [540.908862] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [540.908972] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [540.909050] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [540.909143] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [540.909216] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [540.909288] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [540.909360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [540.909431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [540.909505] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [540.909607] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1

<7> [540.909709] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [540.909806] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [540.909903] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [540.910012] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [540.910122] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [540.910218] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [540.910314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [540.910412] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [540.910508] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [540.910612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [540.910706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [540.910797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [540.910890] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [540.910984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7208960, data_n: 8388608, link_m: 480597, link_n: 524288, tu: 64

<7> [540.911079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [540.911172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [540.911264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [540.911354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [540.911444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [540.911542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [540.911634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [540.911730] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [540.911823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [540.911916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [540.912008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [540.912100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [540.912192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [540.912282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [540.912374] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [540.912464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [540.912564] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [540.912655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [540.912747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 162000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [540.912839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [540.912928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [540.913018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [540.913108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [540.913199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [540.913295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 162000

<7> [540.913389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [540.913480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [540.913579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x50a8

<7> [540.913672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2120

<7> [540.913763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcd9a

<7> [540.913852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [540.913943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x5ab8

<7> [540.914031] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x4c34

<7> [540.914119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [540.914215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [540.914308] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x6000

<7> [540.914398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [540.914488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [540.914585] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x40, hdmi rate: 0x00

<7> [540.914676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [540.914766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [540.914857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [540.914946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.915036] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.915125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.915218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [540.915317] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [540.915413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.915511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.915622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.915721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [540.915819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [540.915917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [540.916013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [540.916107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [540.916200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [540.916290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [540.916379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [540.916469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [540.916571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [540.916672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [fastset]

<7> [540.916770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [540.916865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [540.916959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [540.917053] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [540.917147] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [540.917240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [540.917333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [540.917425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [540.917517] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [540.917519] xe 0000:03:00.0: scan mode: Underscan

<7> [540.917520] xe 0000:03:00.0: colorimetry: No Data

<7> [540.917522] xe 0000:03:00.0: picture aspect: 16:9

<7> [540.917523] xe 0000:03:00.0: active aspect: Same as Picture

<7> [540.917525] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [540.917526] xe 0000:03:00.0: quantization range: Default

<7> [540.917527] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [540.917532] xe 0000:03:00.0: ycc quantization range: Full

<7> [540.917534] xe 0000:03:00.0: hdmi content type: Graphics

<7> [540.917536] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [540.917538] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [540.917540] xe 0000:03:00.0: product: Discrete gfx

<7> [540.917542] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [540.917543] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [540.917546] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [540.917644] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [540.917741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [540.917843] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [540.917940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [540.918038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [540.918139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [540.918237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [540.918332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [540.918426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [540.918524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [540.918642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [540.918758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [540.918858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [540.918953] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [540.919047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [540.919138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [540.919229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [540.919320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625

<7> [540.919411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [540.919501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [540.919604] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0

<7> [540.919694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [540.919784] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06

<7> [540.919873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [540.919962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [540.920050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [540.920140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [540.920228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [540.920317] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00

<7> [540.920405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [540.920493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [540.920594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [540.920690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [540.920783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [540.920876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [540.920968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.921059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.921150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.921240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [540.921331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [540.921421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.921510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.921608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [540.921698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [540.921789] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [540.921878] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [540.921968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [540.922380] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [540.922518] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [540.922682] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [540.922770] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [540.922853] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [540.922934] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [540.923013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [540.923097] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [540.923178] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [540.923258] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [540.923337] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [540.923414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [540.923491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [540.923577] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [540.923657] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [540.923737] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [540.923814] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [540.923891] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [540.924182] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [540.924341] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [540.924623] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [540.924731] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [540.924825] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [540.929643] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.934383] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [540.935401] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [540.935778] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 06

<7> [540.937283] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [540.937797] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [540.945433] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [540.945554] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [540.952429] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [540.952590] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 162000, lane count = 4

<7> [540.953847] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [540.971500] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD

<7> [540.988091] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [540.988786] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [540.992605] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [540.993153] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<7> [540.994312] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.994657] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [540.994911] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.995195] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [540.995485] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [540.995812] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [540.995918] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [540.996087] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [540.996428] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [540.996689] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [540.996890] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [540.997237] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.997477] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [540.997691] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.997914] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [540.998135] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [540.998343] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [540.998556] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [540.998849] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [540.999052] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [540.999230] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [540.999415] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [540.999611] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [540.999791] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [540.999964] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [541.000156] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [541.000304] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [541.000430] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [541.000717] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:537:HDMI-A-3] Limiting display bpp to 30 (EDID bpp 48, max requested bpp 30, max platform bpp 36)

<7> [541.000879] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [541.001016] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [541.001168] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [541.001313] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [541.001457] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [541.001607] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [541.001759] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [541.001874] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [541.001980] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [541.002115] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [541.002214] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [541.002309] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [541.002402] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [541.002491] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [541.002591] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [541.002685] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [541.002774] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [541.002875] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1

<7> [541.002999] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [541.003119] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [541.003230] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [541.003352] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [541.003472] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [541.003582] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [541.003681] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [541.003787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [541.003894] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [541.003996] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [541.004095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [541.004192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [541.004290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [541.004380] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [541.004472] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [541.004576] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [541.004581] xe 0000:03:00.0: scan mode: Underscan

<7> [541.004583] xe 0000:03:00.0: colorimetry: No Data

<7> [541.004586] xe 0000:03:00.0: picture aspect: 16:9

<7> [541.004588] xe 0000:03:00.0: active aspect: Same as Picture

<7> [541.004591] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [541.004592] xe 0000:03:00.0: quantization range: Default

<7> [541.004593] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [541.004595] xe 0000:03:00.0: ycc quantization range: Full

<7> [541.004596] xe 0000:03:00.0: hdmi content type: Graphics

<7> [541.004598] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [541.004600] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [541.004602] xe 0000:03:00.0: product: Discrete gfx

<7> [541.004603] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [541.004604] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [541.004607] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [541.004703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [541.004796] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [541.004888] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [541.004980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [541.005070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [541.005162] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [541.005252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [541.005342] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [541.005433] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [541.005524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [541.005623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [541.005715] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [541.005805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [541.005896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [541.005985] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [541.006074] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [541.006163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [541.006252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 185625

<7> [541.006344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [541.006439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [541.006530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0

<7> [541.006637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [541.006728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06

<7> [541.006818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [541.006907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [541.006998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [541.007087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [541.007178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [541.007266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00

<7> [541.007356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [541.007446] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [541.007535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [541.007634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [541.007722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [541.007813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [541.007903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [541.007992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [541.008081] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [541.008170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [541.008259] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [541.008347] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [541.008435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [541.008523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [541.008635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [541.008724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [541.008814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [541.008904] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [541.008993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [541.009081] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [541.009169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [541.009257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [541.009346] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [541.009434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [541.010338] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [541.010493] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [541.010591] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [541.010675] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [541.010758] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [541.010843] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [541.010924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [541.011004] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [541.011081] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [541.011159] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [541.011236] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [541.011312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [541.011392] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [541.011473] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [541.011556] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [541.011634] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [541.011712] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [541.021039] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [541.021352] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [541.037727] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B]

<7> [541.037921] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [541.040505] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [541.059187] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD

<7> [541.060786] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [541.072554] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [541.076081] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [541.076770] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [541.077769] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [541.078500] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<6> [541.084691] [IGT] xe_pm: finished subtest d3hot-basic-exec, SUCCESS

<7> [541.105682] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [541.127073] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-basic-exec