Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4277-11e54b185d83425fa+ x86_64)
Out 
Using IGT_SRANDOM=1766162927 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [259.315648] Console: switching to colour dummy device 80x25
<6> [259.315831] [IGT] kms_force_connector_basic: executing
<7> [259.319067] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [259.319075] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.319080] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.323238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [259.323270] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.323274] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.327488] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [259.327535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.327539] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.331717] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<6> [259.331932] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [259.332192] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [259.332197] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.332201] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.332605] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [259.332701] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [259.333072] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [259.333168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.333177] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [259.333268] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [259.339336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.339341] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [259.339443] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] status updated from disconnected to connected
<7> [259.339457] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [259.339519] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [259.339568] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [259.339573] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.339577] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.339581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [259.339584] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [259.339588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.339616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.339619] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.340018] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [259.340117] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [259.340533] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [259.340626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.340632] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [259.340726] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [259.347096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.347104] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [259.347239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [259.347243] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.347246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.347249] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [259.347251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [259.347254] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.347427] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:515:HDMI-A-1] EDID override set
<7> [259.347444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.347449] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.347736] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:515:HDMI-A-1] ELD monitor IGT
<7> [259.347739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:515:HDMI-A-1] ELD size 24, SAD count 0
<7> [259.348026] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [259.348122] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [259.348537] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [259.348622] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [259.348698] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [259.348705] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [259.348709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [259.348712] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [259.348715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [259.348718] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.348720] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.348722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.348800] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:HDMI-A-1] EDID override reset
<7> [259.348890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.348893] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.349310] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [259.349404] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [259.349766] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [259.349845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.349850] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [259.349926] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [259.355967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.355972] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [259.356054] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:515:HDMI-A-1] EDID changed, epoch counter 2
<7> [259.356088] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [259.356094] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [259.356100] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] probed modes:
<7> [259.356102] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.356105] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.356108] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [259.356110] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [259.356113] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.356236] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [259.356239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.356243] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.360405] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] status updated from connected to disconnected
<7> [259.360414] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [259.360420] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [259.360465] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [259.360505] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.360510] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.364691] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<6> [259.364905] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [259.374489] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [259.374495] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [259.374548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [259.374555] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [259.375156] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [259.375470] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [259.375616] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [259.375801] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [259.376024] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [259.376033] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [259.376039] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [259.376043] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [259.376065] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [259.376175] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [259.376267] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [259.376819] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [259.376823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [259.376826] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [259.376830] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [259.376834] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [259.380975] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [259.380980] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1]
<7> [259.380983] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-1]
<7> [259.381139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1] disconnected
<7> [259.381142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [259.381145] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [259.402159] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.423128] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.444093] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.465055] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.486012] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.506976] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.527936] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.548891] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.569849] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.590814] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.611771] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.632728] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.653687] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.674651] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.695608] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.716565] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.737522] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.758488] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.779448] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.800412] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.821385] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.842355] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.863324] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.884286] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.905275] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.926262] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.947245] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.968221] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.989181] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.010145] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.031122] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.052083] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.052192] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [260.052211] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [260.052251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [260.052256] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [260.052418] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [260.052705] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [260.052710] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:552:DP-4]
<7> [260.052871] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [260.052875] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes
<7> [260.052879] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:HDMI-A-1] enabled? no
<7> [260.052882] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:524:DP-1] enabled? no
<7> [260.052885] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [260.052887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [260.052890] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [260.052917] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [260.052929] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 3840x2160
<7> [260.052933] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [260.052951] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 3840x2160 set (0,0)
<7> [260.072958] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [260.073323] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:506:eDP-1] force updated from 0 to 0 or reprobing
<7> [260.073328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [260.073333] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [260.073793] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [260.074088] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [260.074394] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [260.074625] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [260.074737] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [260.074742] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [260.074745] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [260.074748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [260.074759] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [260.074857] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [260.074952] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [260.075773] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [260.075783] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [260.075792] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [260.075854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [260.075863] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [260.076411] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [260.076752] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [260.076980] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [260.077185] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [260.077336] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [260.077340] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [260.077342] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [260.077344] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [260.077354] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [260.077446] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [260.077541] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [260.078081] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [260.078085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [260.078089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [260.078199] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:506:eDP-1] EDID override reset
<7> [260.078228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [260.078234] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:eDP-1]
<7> [260.078818] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [260.079103] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [260.079241] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [260.079429] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [260.079547] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [260.079550] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [260.079553] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [260.079555] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [260.079565] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [260.079673] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [260.079766] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [260.080298] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [260.080302] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [260.080310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [260.080475] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:515:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [260.080482] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [260.080490] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [260.084705] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [260.084730] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [260.084734] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [260.088903] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [260.088996] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:HDMI-A-1] EDID override reset
<7> [260.089012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1]
<7> [260.089016] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:515:HDMI-A-1]
<7> [260.093176] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:HDMI-A-1] disconnected
<7> [260.093271] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:524:DP-1] EDID override reset
<7> [260.093285] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1]
<7> [260.093288] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:524:DP-1]
<7> [260.093474] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:524:DP-1] disconnected
<7> [260.093551] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [260.093563] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [260.093566] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [260.114579] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.135539] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.156496] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.177452] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.198404] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.219356] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.240308] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.261259] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.282241] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.303219] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.324190] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.345149] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.366106] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.387062] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.408016] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.428973] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.449930] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.470884] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.491835] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.512787] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.533737] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.554690] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.575647] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.596600] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.617549] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.638499] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.659448] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.680398] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.701350] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.722306] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.743259] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.764251] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [260.764393] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [260.764411] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [260.764515] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [260.764531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [260.764534] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [260.764699] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [260.764769] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [260.764781] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [260.764783] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:552:DP-4]
<7> [260.764930] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [260.785114] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [260.785283] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [260.801722] Console: switching to colour frame buffer device 240x67
Created at 2025-12-19 17:09:53