Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4274-1bfb5feb3a053cde3+ x86_64)
Out 
Using IGT_SRANDOM=1766142687 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Dmesg
<6> [227.991513] Console: switching to colour dummy device 80x25
<6> [227.992012] [IGT] kms_force_connector_basic: executing
<7> [227.997244] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [227.997269] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [227.997284] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.001736] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.001810] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.001820] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.006219] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.006260] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.006268] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.010576] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [228.011060] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [228.011812] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [228.011826] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.011836] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.012330] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [228.012574] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [228.012981] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [228.013229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [228.013251] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [228.013480] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [228.015766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [228.015782] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [228.016018] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from disconnected to connected
<7> [228.016055] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [228.016211] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [228.016352] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [228.016361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [228.016372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [228.016381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [228.016389] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [228.016397] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [228.016457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.016466] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.016895] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [228.017150] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [228.017546] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [228.017775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [228.017792] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [228.018014] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [228.020328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [228.020345] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [228.020719] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [228.020729] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [228.020737] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [228.020745] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [228.020753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [228.020760] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [228.021298] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:550:HDMI-A-1] EDID override set
<7> [228.021349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.021358] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.021924] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD monitor IGT
<7> [228.021933] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD size 24, SAD count 0
<7> [228.022113] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [228.022368] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [228.022789] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [228.023037] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [228.023363] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [228.023384] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [228.023399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [228.023408] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [228.023417] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [228.023426] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [228.023434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [228.023442] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [228.023729] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [228.023953] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.023962] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.024478] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [228.024740] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [228.025175] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [228.025437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [228.025455] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [228.025711] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [228.028033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [228.028050] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [228.028531] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:550:HDMI-A-1] EDID changed, epoch counter 2
<7> [228.028697] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [228.028718] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [228.028735] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [228.028743] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [228.028752] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [228.028760] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [228.028769] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [228.028777] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [228.029205] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [228.029217] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.029227] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.033574] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from connected to disconnected
<7> [228.033597] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.033617] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [228.033739] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [228.033867] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.033877] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.038380] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [228.038997] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [228.041744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [228.042848] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [228.052659] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [228.052678] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [228.052832] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [228.052849] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [228.053704] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [228.054347] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [228.054651] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [228.054942] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [228.055302] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [228.055316] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [228.055325] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [228.055333] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [228.055342] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [228.055382] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [228.055670] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [228.055950] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [228.057030] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [228.057042] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [228.057053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [228.057065] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [228.057101] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [228.057446] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [228.057459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [228.057469] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [228.057796] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [228.057807] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [228.057817] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [228.058449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [228.058461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.058471] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.062815] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.062826] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] enabled? yes
<7> [228.062837] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:DP-1] enabled? no
<7> [228.062845] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:532:DP-2] enabled? no
<7> [228.062853] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [228.062860] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-1] enabled? no
<7> [228.062916] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [228.062956] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] found preferred mode: 1920x1200
<7> [228.062965] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [228.063009] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 1920x1200 set (0,0)
<7> [228.069014] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [228.069927] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:510:eDP-1] force updated from 0 to 0 or reprobing
<7> [228.069943] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [228.069955] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [228.070793] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [228.071332] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [228.071567] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [228.071793] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [228.072053] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [228.072064] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [228.072085] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [228.072092] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [228.072099] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [228.072128] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [228.072352] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [228.072573] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [228.073596] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [228.073606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [228.073614] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [228.073670] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [228.073678] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [228.074326] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [228.074897] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [228.075204] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [228.075484] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [228.075806] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [228.075819] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [228.075827] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [228.075835] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [228.075843] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [228.075874] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [228.076132] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [228.076379] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [228.077309] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [228.077319] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [228.077329] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [228.077608] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:510:eDP-1] EDID override reset
<7> [228.077649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [228.077660] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [228.078360] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [228.078935] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [228.079251] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [228.079562] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [228.079916] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [228.079925] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [228.079931] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [228.079939] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [228.079945] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [228.079972] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [228.080271] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [228.080516] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [228.081415] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [228.081423] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [228.081432] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [228.081653] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:519:DP-1] EDID override reset
<7> [228.081686] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [228.081695] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [228.082009] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [228.082259] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:532:DP-2] EDID override reset
<7> [228.082293] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [228.082301] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [228.082611] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [228.082806] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:541:DP-3] EDID override reset
<7> [228.082835] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [228.082843] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [228.083163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [228.083516] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [228.083528] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.083539] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.086178] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [228.086686] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [228.087058] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [228.087926] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.087997] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.088008] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.092432] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.092618] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [228.092651] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [228.092660] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [228.097015] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [228.098869] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [228.099177] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [228.102274] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [228.102568] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [228.110585] Console: switching to colour frame buffer device 240x75
Created at 2025-12-19 11:36:26