igt@xe_configfs@ctx-restore-post-bb on shard-lnl@xe-4271-53321a6c9c6493826861710f521737de4c9bffcc Test details

Detail	Value
Duration	15.05 seconds
Hostname	shard-lnl-5
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4271-53321a6c9c6493826+ x86_64)
Out	Using IGT_SRANDOM=1766200181 for randomisation Opened device: /dev/dri/card0 Starting subtest: ctx-restore-post-bb Test cmd-single Test cmd-single-multi-values Test cmd-multi Test reg-single Test reg-multi Subtest ctx-restore-post-bb: SUCCESS (15.046s)
Err	Starting subtest: ctx-restore-post-bb Subtest ctx-restore-post-bb: SUCCESS (15.046s)
Dmesg	<6> [158.433684] Console: switching to colour dummy device 80x25 <6> [158.433891] [IGT] xe_configfs: executing <7> [158.445835] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [158.445976] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [158.450779] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [158.451422] [IGT] xe_configfs: starting subtest ctx-restore-post-bb <7> [158.451799] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [158.452200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [158.452366] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [158.452512] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [158.452640] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [158.454137] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [158.454195] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [158.454295] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [158.454379] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.454455] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.454514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.454592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [158.454680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [158.454767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [158.454852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [158.454935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [158.455018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [158.455700] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [158.484302] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [158.488688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [158.488974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [158.489270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [158.489518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [158.489773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [158.490025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [158.490312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [158.490556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [158.490802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [158.491050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [158.491334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [158.491580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [158.491959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [158.492254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [158.492496] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [158.492734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [158.492965] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [158.493199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [158.493419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [158.493648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [158.493921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [158.494160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [158.494403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [158.494654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [158.494858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [158.495098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [158.495334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [158.495546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [158.495753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [158.495950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [158.496155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [158.496337] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [158.496518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [158.496694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [158.496894] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [158.497077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [158.497263] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [158.497449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [158.497628] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [158.497786] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [158.498063] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [158.498237] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [158.498425] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [158.498587] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [158.498762] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [158.498926] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [158.499081] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [158.499359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [158.499520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [158.499668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [158.499812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [158.499949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [158.500079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [158.500297] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [158.500928] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [158.501057] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [158.710394] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [158.711989] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [158.717714] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [158.718097] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [158.718531] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [158.770538] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [158.770970] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [158.779665] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [158.781051] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [158.781189] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [158.782482] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [158.782961] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [158.783835] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [158.784189] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [158.784549] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [158.784920] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [158.785241] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [158.785530] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [158.785817] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [158.786155] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [158.786446] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [158.786714] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [158.786979] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [158.787275] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [158.787548] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [158.787817] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [158.788351] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [158.788631] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [158.788913] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [158.789472] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [158.789959] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [158.790423] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [158.790776] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [158.791188] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [158.807667] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [158.808008] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [158.808310] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [158.808744] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [158.829248] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [158.831106] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [158.836016] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [158.841200] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [158.887080] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [158.887723] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [158.969259] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [158.971063] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [159.039218] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (241 ms remaining) <7> [159.286469] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [159.326172] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [159.360969] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [159.429657] xe 0000:00:02.0: Found custom settings in configfs <6> [159.429731] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [159.431467] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [159.431476] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [159.431575] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:*) <7> [159.431648] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [159.432664] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [159.432793] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [159.432871] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [159.432957] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [159.433039] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [159.433096] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [159.433187] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [159.433258] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [159.433325] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [159.433405] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [159.433465] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [159.433537] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [159.433608] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [159.433678] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [159.433752] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [159.433838] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [159.433923] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [159.434006] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [159.434086] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [159.434189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [159.434292] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [159.434395] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [159.434480] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [159.434556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [159.434632] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [159.434706] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [159.434780] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [159.434852] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [159.434925] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [159.434996] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [159.435067] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [159.435160] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [159.435267] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [159.435364] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [159.435445] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [159.435514] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [159.435584] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [159.435652] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [159.435721] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [159.435794] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [159.435872] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [159.435950] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [159.436031] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [159.436365] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [159.436469] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [159.436558] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [159.436641] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [159.436714] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [159.436789] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [159.436865] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [159.436939] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [159.437010] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [159.437092] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [159.437200] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [159.437295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [159.437389] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [159.437471] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [159.437543] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [159.437611] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [159.437680] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [159.437748] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [159.437821] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [159.437891] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [159.437966] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [159.438046] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [159.438125] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.438214] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [159.438302] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [159.438389] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [159.438475] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [159.438565] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [159.438663] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [159.438916] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [159.438995] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [159.439112] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [159.439563] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [159.439707] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [159.439801] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [159.439878] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [159.439956] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [159.440060] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [159.440182] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [159.440313] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [159.440450] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [159.440564] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [159.440677] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [159.441253] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [159.441756] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [159.441841] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [159.441919] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [159.441997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [159.442073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [159.442421] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [159.443271] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [159.443400] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [159.443467] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [159.443523] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [159.443580] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [159.443635] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [159.443688] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [159.443741] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [159.443792] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [159.443843] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [159.443892] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [159.443944] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [159.444000] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [159.444055] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [159.444131] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [159.444230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [159.444326] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [159.444421] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [159.444498] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [159.444570] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [159.444642] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [159.444713] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [159.444788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [159.444859] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [159.444930] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [159.445001] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [159.445074] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [159.445220] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [159.445321] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [159.445414] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [159.445495] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [159.445574] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [159.445664] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [159.445749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [159.445824] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [159.445898] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [159.445965] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [159.446031] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [159.452401] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [159.457244] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [159.457208] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [159.457344] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [159.457467] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [159.457606] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [159.457764] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [159.457912] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [159.458038] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [159.458164] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [159.458286] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [159.458396] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [159.458503] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [159.458610] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [159.458715] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [159.458820] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [159.458930] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [159.459035] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [159.459131] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [159.459215] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [159.459295] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [159.459374] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [159.459482] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [159.459607] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [159.460957] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [159.461032] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [159.461127] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [159.471136] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [159.471257] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [159.471336] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [159.716172] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [159.728165] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [159.752150] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [159.788129] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [159.800117] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [159.860139] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [160.208110] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [160.208132] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [160.208134] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [160.208136] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [160.208138] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [160.208140] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [160.208142] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [160.208147] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [160.208148] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [160.208149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [160.208204] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [160.208206] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [160.208207] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [160.208229] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [160.208362] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [160.220090] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [160.232097] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [160.232190] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [160.232284] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [160.232376] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [160.232468] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [160.232649] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [160.232725] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [160.232798] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [160.232869] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [160.232932] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [160.233029] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [160.233262] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [160.233414] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [160.233533] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [160.234055] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [160.234184] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [160.234283] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [160.234520] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [160.234622] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [160.234709] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [160.235066] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [160.235167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [160.235256] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [160.235321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [160.235384] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [160.235447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [160.235510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [160.235571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [160.235630] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [160.235690] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [160.235749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [160.235806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [160.235863] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [160.235921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [160.235978] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [160.236035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [160.236100] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [160.236157] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [160.236217] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [160.236274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [160.236334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [160.236394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [160.236457] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.236513] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [160.236568] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [160.236622] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [160.236676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [160.236732] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.236785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [160.236838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [160.236890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [160.236941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [160.236995] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [160.237047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [160.237111] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [160.237167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [160.237225] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [160.237287] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [160.237363] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.237433] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [160.237506] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.237577] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [160.237648] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [160.237714] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [160.237789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [160.237850] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [160.237907] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [160.237963] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [160.238018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [160.238082] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [160.238137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [160.238195] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [160.238259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [160.238336] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [160.238399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [160.238458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [160.238518] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [160.238570] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [160.238621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [160.238672] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [160.238725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [160.238785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [160.238846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [160.238906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [160.238967] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [160.239022] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [160.239078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [160.239129] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [160.239189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [160.239254] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.239313] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.239366] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.239415] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [160.239495] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [160.239574] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [160.239679] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [160.239789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [160.239868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [160.239946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [160.240023] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [160.242323] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [160.244611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [160.244697] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [160.244756] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [160.244811] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [160.244863] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [160.244915] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [160.244967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [160.245017] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [160.245067] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [160.245138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [160.245193] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [160.245255] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [160.245315] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [160.245368] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [160.245417] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [160.245502] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [160.256206] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [160.256918] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [160.257012] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [160.257080] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [160.257134] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [160.257186] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [160.257249] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [160.784246] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [160.784251] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [160.784252] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [160.784463] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [160.784559] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [160.784641] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [160.784726] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [160.784846] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [160.784960] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [160.785097] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [160.785180] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [160.785285] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [160.785381] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [160.786269] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [160.786358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [160.786442] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [160.786524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [160.786597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [160.786668] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [160.786737] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [160.786806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [160.786870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [160.786931] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [160.786994] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [160.787063] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [160.787129] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [160.787200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [160.787268] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [160.787335] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [160.787399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [160.787459] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [160.787519] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [160.787579] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [160.787639] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [160.787698] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [160.787758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [160.787817] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [160.787881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [160.787939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [160.788003] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [160.788072] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [160.788137] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [160.788205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [160.788284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [160.788355] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [160.788420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [160.788484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [160.788545] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [160.788608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [160.788669] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [160.788736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [160.788802] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [160.788866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [160.789040] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [160.789128] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [160.789204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [160.789288] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [160.789456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [160.789527] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [160.789590] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [160.789653] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [160.789790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [160.789848] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [160.789907] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [160.789964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [160.790022] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [160.790089] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [160.790152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [160.790497] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [160.790611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [160.790668] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [160.790721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [160.790771] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [160.790821] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [160.790870] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [160.790919] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [160.790968] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [160.791016] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [160.791076] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [160.791128] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [160.791178] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [160.791230] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [160.791284] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [160.791359] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [160.791492] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [160.791906] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [160.794458] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [160.811444] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [160.822638] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [160.823003] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [160.824172] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [160.824274] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [160.824336] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [160.824393] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [160.824450] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [160.824506] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [160.824560] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [160.824617] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [160.824676] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [160.827125] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [160.827215] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [160.827277] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [160.828919] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [160.829014] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [160.831703] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [160.835486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [160.835600] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [160.835692] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [160.835780] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [160.835866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [160.835952] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [160.836038] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [160.836160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [160.836245] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [160.836329] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [160.836411] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [160.836496] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [160.836581] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [160.836665] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [160.837331] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [160.839011] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [160.840313] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [160.840459] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [160.840644] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [160.862359] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [160.863020] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [160.863437] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [160.863703] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [160.864001] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [160.864325] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [160.864562] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [160.864826] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [160.864833] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [160.864839] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [160.864844] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [160.864849] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [160.864854] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [160.864859] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [160.864863] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [160.864869] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [160.864873] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [160.865359] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [160.865707] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [160.866082] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [160.866432] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [160.866780] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [160.867129] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [160.867520] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [160.867860] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [160.868217] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [160.868511] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [160.869287] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [160.869546] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [160.869850] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [160.870118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [160.870378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [160.870622] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [160.870890] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [160.871128] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [160.871351] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [160.871590] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [160.871906] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [160.873679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [160.873839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [160.874002] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [160.874181] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [160.874352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [160.874500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [160.874642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [160.874785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [160.874914] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [160.875047] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [160.875208] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [160.875339] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [160.875464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [160.875587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [160.875709] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [160.875823] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [160.875938] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [160.876052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [160.876160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [160.876282] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [160.876387] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [160.876488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [160.876589] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [160.876685] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [160.876782] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [160.876881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [160.876977] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [160.877084] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [160.877178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [160.877282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [160.877386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [160.877490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [160.877588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [160.877680] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [160.877772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [160.877870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [160.877974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [160.878088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [160.878173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [160.878258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [160.878855] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [160.878952] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [160.879041] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [160.879150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [160.879232] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [160.879313] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [160.879390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [160.879467] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [160.879542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [160.879616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [160.879688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [160.879760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [160.880235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [160.880307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [160.880377] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [160.881107] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [160.881233] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [160.881295] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [160.881350] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [160.881403] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [160.881454] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [160.881504] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [160.881553] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [160.881602] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [160.881651] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [160.881699] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [160.881746] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [160.881793] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [160.881838] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [160.881884] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [160.881961] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [160.882057] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [160.883909] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [160.907506] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [160.929035] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [160.929664] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [160.931953] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [160.932255] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [160.935954] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [160.936203] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [160.940092] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [160.940320] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [160.985218] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [160.986412] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [160.986799] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [160.987175] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [160.987545] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [160.988425] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [160.988738] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [160.989021] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [160.991301] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [160.991680] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [160.992065] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [160.992494] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [160.992939] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [160.993422] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [160.993813] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [160.994222] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [160.994588] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [160.994907] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [160.995247] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [160.995550] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [160.995846] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [160.996173] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [160.996469] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [160.997198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [160.997554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [160.997924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [160.998313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [160.998619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [160.999027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [160.999365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [160.999635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [161.000018] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [161.000586] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [161.000896] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [161.001166] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [161.013653] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [161.015804] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [161.016023] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [161.016683] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [161.018075] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [161.018223] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [161.018792] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [161.019432] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [161.019475] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [161.019942] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [161.020558] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [161.020590] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [161.020942] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [161.021519] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [161.021545] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [161.021551] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [161.031468] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [161.034618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 <7> [161.035607] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [161.035721] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [161.037200] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [161.038564] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [161.038728] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [161.038850] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [161.038955] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [161.039084] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [161.039186] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [161.039283] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [161.039412] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [161.039507] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [161.039585] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [161.039914] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [161.040012] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [161.040200] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [161.040277] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [161.040524] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [161.040782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [161.040791] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [161.041444] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [161.041755] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [161.041874] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [161.041986] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [161.042201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [161.042208] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [161.042210] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.042211] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [161.042214] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [161.042216] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.042218] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [161.042223] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.042225] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [161.042227] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.042256] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [161.042360] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [161.042463] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [161.042966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [161.043271] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [161.043345] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [161.043347] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [161.043349] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.043405] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [161.043412] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [161.043416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [161.043421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [161.043426] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [161.043581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [161.043585] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [161.043588] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [161.043704] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [161.043707] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [161.043710] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [161.043837] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [161.043841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [161.043844] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [161.043847] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [161.043849] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [161.043950] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [161.043970] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [161.043974] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [161.043989] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [161.044146] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [161.044159] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [161.051369] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [161.052054] fbcon: xedrmfb (fb0) is primary device <7> [161.053030] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [161.053227] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [161.053345] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [161.053469] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [161.053574] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [161.053689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [161.053823] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [161.053954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [161.054101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [161.054230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [161.054359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [161.054485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [161.054629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [161.054807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [161.054982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [161.055178] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [161.055352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [161.055552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [161.055724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [161.055897] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [161.056099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [161.056280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [161.056461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [161.056678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [161.056877] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [161.057120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [161.057312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [161.057489] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [161.057695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [161.057882] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [161.058074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [161.058256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [161.058462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [161.058634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [161.058788] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [161.058944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [161.059150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [161.059309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [161.059467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [161.059625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [161.059752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [161.059867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [161.059985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [161.060119] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [161.060236] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [161.060354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [161.060470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [161.060597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [161.060775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [161.060983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [161.061211] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [161.061402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [161.061598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [161.061769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [161.061914] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [161.062066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [161.062208] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [161.062347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [161.062483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [161.062620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [161.062808] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [161.063051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [161.063242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [161.063431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [161.063620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [161.063735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [161.063850] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [161.063964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [161.064091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [161.064206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [161.064318] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [161.064430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [161.064544] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [161.064768] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [161.064910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [161.065056] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [161.065187] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [161.065310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [161.065419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [161.065526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [161.065647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [161.065828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [161.066055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [161.066265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [161.066470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [161.066676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [161.066878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [161.067206] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [161.067448] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [161.067687] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [161.067899] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [161.068146] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [161.068376] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [161.068563] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [161.068766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [161.068985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [161.069236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [161.069467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [161.069709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [161.069918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [161.070151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [161.070367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [161.070609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [161.070809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [161.071008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [161.071239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [161.071437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [161.071634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [161.071841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [161.072058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [161.072254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [161.072450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [161.072641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [161.072832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [161.073022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [161.073283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [161.073497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [161.073689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [161.073878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [161.074081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [161.074270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [161.074459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [161.074645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [161.074831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [161.075017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [161.075234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [161.075432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [161.075613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [161.075795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [161.075979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [161.076215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [161.076396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [161.076576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [161.076756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [161.076936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [161.077146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [161.077326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [161.077504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [161.077647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [161.077765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [161.077884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [161.078003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [161.078138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [161.078271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [161.078402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [161.078520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [161.078672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [161.078857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [161.079053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [161.079241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [161.079428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [161.079614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [161.079789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [161.079962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [161.080160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [161.080331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [161.080520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [161.080674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [161.080743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [161.081151] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [161.081748] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [161.081851] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [161.081933] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [161.082026] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [161.082125] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [161.082211] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [161.082292] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [161.082372] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [161.082444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [161.082521] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [161.082597] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [161.082671] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [161.082733] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [161.082788] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [161.082844] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [161.082900] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [161.082986] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [161.083164] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [161.083236] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [161.083351] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [161.083432] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [161.084417] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [161.084500] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [161.084589] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <6> [161.091783] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [161.091966] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [161.094169] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [161.094288] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [161.094402] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [161.114209] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [161.302863] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [161.306123] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [161.307817] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [161.308895] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [161.310430] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [161.311824] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [161.313608] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [161.314261] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [161.315994] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [161.316490] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [161.317383] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [161.317949] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [161.318406] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [161.318813] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [161.334831] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [161.337304] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [161.337795] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [161.339336] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [161.342726] Console: switching to colour frame buffer device 180x56 <6> [161.390548] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [161.390624] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [161.391201] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [161.391700] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [161.392219] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [161.392664] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [161.393140] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [161.393542] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [161.393892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [161.394270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [161.394669] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [161.395005] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [161.395393] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [161.395723] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [161.396059] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [161.396385] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [161.396709] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [161.397042] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [161.397364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [161.397686] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [161.398007] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [161.398365] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [161.398707] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [161.400102] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [161.400333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [161.400626] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [161.400918] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [161.401202] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [161.401492] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [161.401522] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [161.401612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [161.401627] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [161.402077] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [161.402349] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [161.402628] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [161.403892] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [161.404516] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [161.405114] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [161.405563] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [161.406012] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [161.406611] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [161.406630] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [161.406638] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.406643] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [161.406653] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [161.406661] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.406667] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [161.406676] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.406682] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [161.406691] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.406738] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [161.407207] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [161.407628] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [161.409492] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [161.409501] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [161.409507] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [161.409722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [161.409738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [161.409753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [161.409769] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [161.409783] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [161.410314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [161.410328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [161.410338] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [161.410804] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [161.410817] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [161.410827] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [161.411353] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [161.411364] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [161.411375] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [161.411383] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [161.411391] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [161.411462] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [161.411508] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [161.411519] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [161.411575] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [161.413180] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [161.413882] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [161.414379] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [161.416422] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [161.417008] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [161.417612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [161.417929] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [161.418218] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [161.419264] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [161.456485] Console: switching to colour dummy device 80x25 <7> [161.468273] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [161.468467] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [161.468934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [161.469435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [161.469803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [161.470368] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [161.470859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [161.471514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [161.472118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [161.472679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [161.473328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [161.473911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [161.475840] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [161.484699] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [161.489938] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [161.490418] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [161.490837] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [161.491335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [161.491752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [161.492180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [161.492537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [161.492979] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [161.493579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [161.493984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [161.494403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [161.494722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [161.495035] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [161.495376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [161.495673] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [161.495945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [161.496246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [161.496495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [161.496820] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [161.497064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [161.497281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [161.497538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [161.497745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [161.497967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [161.498179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [161.498363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [161.498580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [161.498769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [161.498969] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [161.499160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [161.499323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [161.499479] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [161.499635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [161.499786] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [161.499947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [161.500151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [161.500300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [161.500444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [161.500590] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [161.500736] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [161.501130] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [161.501252] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [161.501392] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [161.501534] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [161.501681] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [161.501810] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [161.501933] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [161.502112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [161.502246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [161.502359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [161.502472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [161.502585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [161.502696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [161.502801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [161.503317] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [161.503426] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [161.523441] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [161.710302] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [161.710891] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [161.721599] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [161.722130] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [161.721995] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [161.722645] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [161.723049] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [161.774505] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [161.775303] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [161.782154] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [161.782831] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [161.782878] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [161.783774] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [161.784550] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [161.785203] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [161.786979] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [161.787542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [161.788048] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [161.788495] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [161.789002] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [161.789573] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [161.790090] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [161.790616] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [161.791119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [161.791545] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [161.791934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [161.792387] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [161.792786] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [161.793212] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [161.793729] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [161.794122] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [161.794451] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [161.795120] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [161.795592] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [161.796052] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [161.796340] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [161.796728] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [161.811554] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [161.811900] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [161.812164] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [161.812454] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [161.825043] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [161.831635] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [161.838716] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [161.844910] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [161.878118] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [161.879012] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [161.950535] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [161.952846] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [161.997197] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (286 ms remaining) <7> [162.286133] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [162.337234] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [162.338305] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [162.345349] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [162.350795] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [162.372247] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [162.423811] xe 0000:00:02.0: Found custom settings in configfs <6> [162.423856] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [162.426199] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [162.426210] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [162.426322] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [162.426400] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [162.427338] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [162.427449] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [162.427526] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [162.427614] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [162.427697] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [162.427764] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [162.427831] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [162.427895] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [162.427959] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [162.428053] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [162.428132] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [162.428232] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [162.428329] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [162.428405] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [162.428483] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [162.428571] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [162.428657] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [162.428740] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [162.428818] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [162.428896] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [162.428972] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [162.429082] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [162.429181] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [162.429288] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [162.429374] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [162.429449] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [162.429522] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [162.429595] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [162.429668] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [162.429740] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [162.429812] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [162.429884] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [162.429956] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [162.430051] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [162.430148] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [162.430246] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [162.430330] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [162.430403] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [162.430474] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [162.430545] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [162.430616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [162.430687] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [162.430762] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [162.431522] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [162.431632] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [162.431728] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [162.431821] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [162.431919] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [162.432025] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [162.432140] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [162.432249] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [162.432340] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [162.432430] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [162.432514] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [162.432594] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [162.432673] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [162.432751] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [162.432831] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [162.432906] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [162.432984] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [162.433072] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [162.433172] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [162.433272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [162.433357] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [162.433443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [162.433527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [162.433607] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [162.433680] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [162.433752] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [162.433831] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [162.433927] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [162.434045] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [162.434252] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [162.434342] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [162.434460] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [162.434552] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [162.434695] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [162.434788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [162.434865] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [162.434942] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [162.435065] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [162.435202] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [162.435331] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [162.435445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [162.435559] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [162.435664] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [162.436114] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [162.436850] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [162.436943] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [162.437045] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [162.437148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [162.437247] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [162.437339] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [162.437355] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [162.437425] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [162.437491] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [162.437500] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [162.437564] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [162.437573] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [162.437629] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [162.437646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [162.437691] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [162.437717] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [162.437751] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [162.437788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [162.437809] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [162.437859] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [162.437867] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [162.437922] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [162.437929] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [162.437978] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [162.438014] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [162.438059] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [162.438106] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [162.438129] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [162.438198] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [162.438200] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [162.438266] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [162.438290] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [162.438370] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [162.438440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [162.438511] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [162.438583] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [162.438658] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [162.438731] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [162.438808] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [162.438883] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [162.438968] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [162.439130] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [162.439232] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [162.439335] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [162.448300] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [162.453138] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [162.454206] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [162.454350] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [162.454468] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [162.454603] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [162.454735] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [162.454868] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [162.455003] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [162.455120] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [162.455231] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [162.455336] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [162.455421] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [162.455507] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [162.455592] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [162.455675] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [162.455760] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [162.455849] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [162.455917] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [162.456205] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [162.456285] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [162.456362] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [162.456468] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [162.456697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [162.458038] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [162.458133] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [162.458241] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [162.468036] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [162.468278] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [162.468487] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [162.707052] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [162.719056] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [162.743024] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [162.779006] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [162.790998] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [162.851007] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [163.198994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [163.199007] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [163.199009] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [163.199010] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [163.199013] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [163.199015] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [163.199016] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [163.199019] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [163.199020] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [163.199022] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [163.199067] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [163.199068] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [163.199070] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [163.199092] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [163.199181] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [163.210970] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [163.222977] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [163.223075] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [163.223164] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [163.223251] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [163.223342] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [163.223519] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [163.223596] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [163.223668] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [163.223731] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [163.223792] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [163.223885] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [163.224094] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [163.224216] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [163.224323] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [163.224737] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [163.224844] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [163.224940] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [163.225230] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [163.225347] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [163.225442] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [163.225754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [163.225842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [163.225928] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [163.226005] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [163.226072] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [163.226141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [163.226220] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [163.226285] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [163.226347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [163.226409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [163.226471] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [163.226531] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [163.226591] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [163.226654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [163.226717] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [163.226780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [163.226841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [163.226902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [163.226968] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [163.227029] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [163.227090] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [163.227168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [163.227237] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [163.227297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [163.227355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [163.227411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [163.227468] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [163.227533] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [163.227595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [163.227657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [163.227720] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [163.227782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [163.227846] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [163.227905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [163.227975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [163.228031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [163.228086] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [163.228150] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [163.228221] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [163.228291] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [163.228365] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [163.228440] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [163.228515] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [163.228585] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [163.228658] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [163.228722] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [163.228784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [163.228844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [163.228901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [163.228960] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [163.229014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [163.229078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [163.229141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [163.229196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [163.229251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [163.229307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [163.229362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [163.229416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [163.229470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [163.229523] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [163.229579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [163.229639] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [163.229698] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [163.229757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [163.229815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [163.229869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [163.229919] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [163.229979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [163.230032] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [163.230094] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [163.230148] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [163.230201] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [163.230254] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [163.230335] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [163.230415] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [163.230510] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [163.230618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [163.230697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [163.230775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [163.230854] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [163.232292] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [163.234547] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [163.234632] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [163.234690] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [163.234743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [163.234795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [163.234846] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [163.234896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [163.234945] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [163.235023] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [163.235078] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [163.235140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [163.235200] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [163.235252] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [163.235301] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [163.235350] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [163.235433] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [163.246111] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [163.246782] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [163.246861] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [163.246917] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [163.246986] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [163.247042] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [163.247104] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [163.765510] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [163.765515] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [163.765517] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [163.765658] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [163.765751] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [163.765839] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [163.765911] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [163.766038] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [163.766149] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [163.766291] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [163.766360] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [163.766429] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [163.766498] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [163.767331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [163.767400] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [163.767469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [163.767534] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [163.767597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [163.767661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [163.767724] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [163.767791] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [163.767854] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [163.767916] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [163.767992] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [163.768055] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [163.768119] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [163.768180] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [163.768239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [163.768298] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [163.768355] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [163.768412] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [163.768469] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [163.768525] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [163.768582] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [163.768638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [163.768694] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [163.768751] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [163.768809] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [163.768866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [163.768933] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [163.768997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [163.769069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [163.769148] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [163.769210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [163.769271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [163.769334] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [163.769397] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [163.769459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [163.769521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [163.769585] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [163.769652] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [163.769718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [163.769782] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [163.769961] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [163.770034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [163.770125] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [163.770191] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [163.770331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [163.770391] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [163.770449] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [163.770506] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [163.770640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [163.770698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [163.770757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [163.770816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [163.770877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [163.770938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [163.770997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [163.771330] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [163.771432] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [163.771490] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [163.771544] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [163.771594] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [163.771644] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [163.771694] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [163.771743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [163.771792] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [163.771840] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [163.771887] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [163.771942] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [163.771989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [163.772045] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [163.772113] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [163.772191] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [163.772271] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [163.772662] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [163.775318] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [163.792496] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [163.803680] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [163.804010] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [163.804924] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [163.805047] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [163.805118] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [163.805178] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [163.805240] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [163.805300] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [163.805359] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [163.805418] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [163.805481] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [163.807658] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [163.807754] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [163.807832] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [163.809337] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [163.809433] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [163.811624] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [163.814995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [163.815095] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [163.815168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [163.815235] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [163.815293] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [163.815349] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [163.815404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [163.815459] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [163.815513] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [163.815567] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [163.815622] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [163.815673] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [163.815723] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [163.815773] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [163.816214] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [163.817337] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [163.818078] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [163.818153] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [163.818241] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [163.839080] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [163.839619] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [163.839857] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [163.840100] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [163.840280] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [163.840448] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [163.840604] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [163.840796] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [163.840801] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [163.840804] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [163.840807] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [163.840810] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [163.840813] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [163.840817] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [163.840820] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [163.840823] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [163.840826] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [163.841170] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [163.841395] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [163.841620] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [163.841880] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [163.842143] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [163.842376] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [163.842580] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [163.842828] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [163.843061] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [163.843249] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [163.843632] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [163.843795] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [163.843976] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [163.844171] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [163.844357] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [163.844527] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [163.844685] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [163.844837] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [163.845001] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [163.845152] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [163.845366] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [163.846683] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [163.846807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [163.846936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [163.847053] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [163.847167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [163.847279] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [163.847387] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [163.847499] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [163.847605] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [163.847712] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [163.847822] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [163.847924] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [163.848053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [163.848152] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [163.848259] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [163.848369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [163.848473] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [163.848565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [163.848655] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [163.848753] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [163.848850] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [163.848942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [163.849026] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [163.849109] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [163.849192] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [163.849275] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [163.849354] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [163.849434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [163.849512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [163.849600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [163.849688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [163.849772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [163.849853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [163.849938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [163.850015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [163.850092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [163.850167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [163.850241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [163.850314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [163.850393] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [163.850945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [163.851025] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [163.851106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [163.851182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [163.851254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [163.851325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [163.851394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [163.851463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [163.851531] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [163.851598] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [163.851663] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [163.851727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [163.852174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [163.852241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [163.852305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [163.853031] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [163.853159] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [163.853220] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [163.853275] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [163.853328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [163.853381] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [163.853431] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [163.853481] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [163.853531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [163.853579] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [163.853628] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [163.853677] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [163.853725] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [163.853771] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [163.853819] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [163.853890] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [163.854435] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [163.856088] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [163.875823] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [163.897213] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [163.897790] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [163.900041] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [163.900298] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [163.904289] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [163.904512] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [163.908542] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [163.908772] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [163.953121] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [163.954587] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [163.955037] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [163.955423] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [163.955858] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [163.956483] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [163.956808] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [163.957215] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [163.958188] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [163.958602] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [163.959012] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [163.959432] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [163.959813] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [163.960270] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [163.960650] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [163.961087] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [163.961448] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [163.961802] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [163.962183] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [163.962524] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [163.962861] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [163.963242] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [163.963574] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [163.964370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [163.964794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [163.965238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [163.965659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [163.966040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [163.966505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [163.966865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [163.967237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [163.967641] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [163.967961] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [163.968251] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [163.968525] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [163.977112] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [163.978638] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [163.978792] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [163.979160] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [163.980065] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [163.980108] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [163.980533] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [163.981232] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [163.981272] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [163.981681] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [163.982361] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [163.982396] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [163.982803] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [163.983454] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [163.983484] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [163.983490] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [163.995404] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [163.998842] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 <7> [163.999463] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [163.999587] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [163.999951] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [164.001244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [164.001480] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [164.001653] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [164.001797] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [164.002784] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [164.002899] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [164.003039] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [164.003142] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [164.003414] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [164.003668] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [164.003758] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [164.003826] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [164.003929] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [164.004015] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [164.004259] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [164.004387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [164.004393] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [164.004851] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [164.005291] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [164.005436] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [164.005573] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [164.005726] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [164.005732] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.005735] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.005736] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [164.005739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [164.005743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.005746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [164.005749] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.005752] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [164.005755] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.005774] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [164.005942] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [164.006086] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [164.006603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [164.006620] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [164.006808] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.006811] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.006813] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.006875] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [164.006879] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [164.006884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [164.006888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [164.006892] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [164.007361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [164.007367] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [164.007371] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [164.007531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [164.007535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [164.007538] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [164.007693] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [164.007697] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [164.007701] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [164.007704] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [164.007707] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [164.007731] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [164.007749] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [164.007753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [164.007770] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [164.007835] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [164.007844] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [164.015013] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [164.015456] fbcon: xedrmfb (fb0) is primary device <7> [164.016345] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [164.016462] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [164.016563] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [164.016664] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [164.016756] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [164.016849] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [164.016950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [164.017058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [164.017164] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [164.017268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [164.017372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [164.017459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [164.017544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [164.017630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [164.017732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [164.017833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [164.017977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [164.018079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [164.018181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [164.018281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [164.018380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [164.018477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [164.018581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [164.018675] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [164.018772] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [164.018873] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [164.018992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [164.019084] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [164.019177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [164.019268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [164.019358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [164.019435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [164.019512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [164.019587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [164.019664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [164.019740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [164.019816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [164.019887] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [164.019973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [164.020065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [164.020154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [164.020242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [164.020332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [164.020422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [164.020514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [164.020602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [164.020682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [164.020760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [164.020838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [164.020915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [164.021022] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [164.021115] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [164.021207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [164.021289] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [164.021365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [164.021437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [164.021514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [164.021604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [164.021693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [164.021783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [164.021858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [164.021938] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [164.022026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [164.022114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [164.022202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [164.022290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [164.022367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [164.022434] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [164.022501] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [164.022568] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [164.022639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [164.022711] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [164.022785] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [164.022907] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [164.023023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [164.023100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [164.023171] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [164.023241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [164.023311] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [164.023378] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [164.023437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [164.023513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [164.023616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [164.023711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [164.023801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [164.023902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [164.024021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [164.024121] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [164.024243] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [164.024351] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [164.024449] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [164.024547] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [164.024646] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [164.024717] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [164.024793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [164.024873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [164.025020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [164.025122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [164.025220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [164.025316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [164.025396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [164.025492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [164.025589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [164.025684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [164.025769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [164.025847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [164.025942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [164.026036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [164.026130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [164.026224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [164.026319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [164.026412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [164.026504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [164.026598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [164.026692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [164.026784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [164.026878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [164.026983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [164.027076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [164.027171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [164.027267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [164.027365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [164.027462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [164.027563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [164.027656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [164.027752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [164.027868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [164.027973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [164.028068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [164.028162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [164.028247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [164.028325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [164.028403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [164.028480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [164.028557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [164.028630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [164.028701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [164.028772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [164.028848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [164.028928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [164.029017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [164.029107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [164.029197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [164.029278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [164.029353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [164.029429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [164.029503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [164.029577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [164.029655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [164.029733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [164.029811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [164.029883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [164.029984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [164.030079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [164.030173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [164.030266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [164.030357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [164.030447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [164.030538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [164.030897] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [164.031006] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [164.031115] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [164.031203] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [164.031305] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [164.031386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [164.031466] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [164.031546] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [164.031625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [164.031705] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [164.031785] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [164.031863] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [164.031952] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [164.032028] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [164.032102] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [164.032175] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [164.032247] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [164.032332] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [164.032527] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [164.032596] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [164.032694] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [164.032772] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [164.033692] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [164.033761] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [164.033846] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [164.042959] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [164.043056] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [164.043155] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [164.060644] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [164.060910] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [164.083862] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [164.258496] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [164.260804] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [164.262098] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [164.263079] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [164.264332] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [164.265587] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [164.266969] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [164.267480] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [164.269268] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [164.269837] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [164.270943] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [164.271605] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [164.272252] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [164.272843] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [164.288511] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [164.290529] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [164.291067] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [164.292640] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [164.295119] Console: switching to colour frame buffer device 180x56 <6> [164.344847] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [164.344870] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [164.345536] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [164.346072] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [164.346611] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [164.347111] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [164.347583] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [164.348045] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [164.348464] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [164.348847] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [164.349270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [164.349624] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [164.349963] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [164.350341] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [164.350689] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [164.351031] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [164.351353] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [164.351715] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [164.352114] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [164.352466] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [164.352813] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [164.353171] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [164.353521] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [164.358851] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [164.359346] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [164.359824] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [164.360353] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [164.360806] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [164.361282] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [164.361665] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [164.362074] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [164.362442] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [164.368450] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [164.369825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [164.370018] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [164.370205] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [164.370398] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [164.370586] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [164.370766] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [164.370937] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [164.388727] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [164.388777] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [164.390239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [164.390291] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [164.391893] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [164.392873] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [164.393615] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [164.394255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [164.395253] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [164.395274] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.395282] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.395286] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [164.395297] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [164.395305] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.395312] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [164.395338] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.395343] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [164.395352] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.395430] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [164.395923] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [164.396340] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [164.397584] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.397593] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.397600] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.397862] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [164.397895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [164.397942] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [164.397959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [164.397973] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [164.398603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [164.398617] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [164.398630] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [164.399045] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [164.399056] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [164.399066] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [164.399495] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [164.399506] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [164.399516] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [164.399525] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [164.399532] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [164.399801] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [164.399848] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [164.399857] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [164.399949] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [164.406040] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [164.421739] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [164.421757] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [164.422088] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [164.422113] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [164.423049] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [164.423619] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [164.424228] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [164.424823] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [164.425505] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [164.425529] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.425540] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.425547] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [164.425563] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [164.425575] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.425581] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [164.425590] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.425595] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [164.425602] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.425637] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [164.425951] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [164.426230] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [164.427048] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.427055] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [164.427059] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [164.427206] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [164.427216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [164.427225] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [164.427235] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [164.427244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [164.427625] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [164.427635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [164.427643] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [164.428362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [164.428380] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [164.428396] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [164.428966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [164.428978] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [164.428990] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [164.429000] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [164.429010] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [164.429077] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [164.429121] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [164.429135] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [164.429178] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [164.455415] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [164.494799] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <6> [164.519544] Console: switching to colour dummy device 80x25 <7> [164.521986] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [164.522234] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [164.522845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [164.523300] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [164.523738] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [164.524131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [164.524596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [164.525649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [164.526496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [164.527279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [164.527987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [164.528609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [164.530633] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [164.538396] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [164.541309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [164.542018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [164.542659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [164.543242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [164.543783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [164.544804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [164.545443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [164.546004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [164.546502] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [164.547062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [164.547562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [164.548057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [164.548522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [164.549062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [164.549554] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [164.550100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [164.550623] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [164.551102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [164.551608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [164.552108] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [164.552575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [164.553103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [164.553553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [164.553954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [164.554267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [164.554580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [164.554869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [164.555196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [164.555459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [164.555715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [164.556016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [164.556250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [164.556471] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [164.556691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [164.556922] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [164.557141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [164.557347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [164.557551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [164.557742] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [164.557938] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [164.558214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [164.558383] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [164.558589] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [164.558794] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [164.559012] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [164.559218] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [164.559403] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [164.559609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [164.559776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [164.559932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [164.560077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [164.560215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [164.560345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [164.560495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [164.560852] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [164.560993] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [164.766119] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [164.766809] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [164.772361] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [164.772855] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [164.773436] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [164.824743] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [164.825255] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [164.825385] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [164.825890] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [164.826781] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [164.826774] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [164.827332] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [164.827937] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [164.828304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [164.828641] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [164.829027] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [164.829353] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [164.829673] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [164.830018] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [164.830324] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [164.830625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [164.830944] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [164.831276] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [164.831565] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [164.831849] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [164.832203] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [164.832573] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [164.832842] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [164.833177] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [164.833768] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [164.834284] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [164.834713] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [164.835042] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [164.835462] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [164.862256] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [164.862680] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [164.863010] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [164.863375] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [164.867928] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [164.873624] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [164.886678] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [164.894404] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [164.924517] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [164.925301] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [164.998018] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [165.001487] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [165.078217] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (248 ms remaining) <7> [165.334040] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [165.410043] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [165.411124] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [165.416681] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [165.422294] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [165.454703] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [165.511453] xe 0000:00:02.0: Found custom settings in configfs <6> [165.511490] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [165.512754] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [165.512766] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [165.512891] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [165.512983] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [165.514235] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [165.514450] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [165.514555] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [165.514665] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [165.514785] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [165.514856] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [165.514940] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [165.515008] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [165.515075] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [165.515163] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [165.515246] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [165.515340] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [165.515434] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [165.515530] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [165.515628] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [165.515750] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [165.515875] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [165.515991] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [165.516102] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [165.516212] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [165.516323] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [165.516438] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [165.516553] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [165.516671] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [165.516790] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [165.516916] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [165.517037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [165.517155] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [165.517273] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [165.517392] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [165.517514] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [165.517639] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [165.517768] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [165.517907] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [165.518037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [165.518169] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [165.518300] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [165.518430] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [165.518559] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [165.518693] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [165.518828] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [165.518972] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [165.519118] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [165.519670] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [165.519876] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [165.520044] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [165.520206] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [165.520356] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [165.520509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [165.520664] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [165.520806] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [165.520938] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [165.521088] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [165.521225] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [165.521362] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [165.521501] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [165.521642] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [165.521782] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [165.521920] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [165.522045] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [165.522166] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [165.522293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [165.522414] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [165.522532] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [165.522650] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [165.522762] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [165.522926] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [165.523046] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [165.523157] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [165.523285] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [165.523427] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [165.523567] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [165.523856] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [165.523980] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [165.524130] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [165.524279] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [165.524457] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [165.524592] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [165.524697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [165.524798] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [165.524934] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [165.525070] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [165.525200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [165.525333] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [165.525467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [165.525602] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [165.526219] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [165.527315] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [165.527440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [165.527536] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [165.527627] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [165.527718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [165.527808] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [165.527940] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [165.528036] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [165.528132] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [165.528224] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [165.528261] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [165.528316] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [165.528418] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [165.528407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [165.528498] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [165.528502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [165.528570] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [165.528590] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [165.528637] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [165.528687] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [165.528704] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [165.528770] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [165.528775] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [165.528835] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [165.528862] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [165.528912] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [165.528962] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [165.528980] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [165.529045] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [165.529050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [165.529112] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [165.529139] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [165.529179] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [165.529227] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [165.529247] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [165.529318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [165.529425] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [165.529522] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [165.529613] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [165.529703] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [165.529792] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [165.529887] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [165.529980] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [165.530071] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [165.540686] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [165.541857] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [165.546487] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [165.546599] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [165.546699] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [165.546813] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [165.547019] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [165.547156] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [165.547283] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [165.547393] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [165.547509] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [165.547634] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [165.547770] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [165.547905] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [165.548034] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [165.548163] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [165.548297] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [165.548422] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [165.548528] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [165.548629] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [165.548708] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [165.548779] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [165.548879] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [165.548985] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [165.549883] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [165.549965] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [165.550069] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [165.559920] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [165.560060] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [165.560164] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [165.801938] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [165.813928] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [165.837951] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [165.873895] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [165.885884] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [165.945894] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [166.293876] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [166.293889] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [166.293892] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [166.293893] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [166.293896] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [166.293899] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [166.293900] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [166.293903] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [166.293904] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [166.293906] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [166.293955] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [166.293956] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [166.293957] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [166.293979] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [166.294070] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [166.305866] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [166.317866] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [166.317966] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [166.318049] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [166.318135] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [166.318223] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [166.318406] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [166.318479] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [166.318547] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [166.318615] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [166.318674] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [166.318764] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [166.318977] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [166.319119] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [166.319235] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [166.319650] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [166.319781] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [166.319906] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [166.320130] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [166.320233] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [166.320324] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [166.320651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [166.320743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [166.320832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [166.320921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [166.320998] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [166.321063] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [166.321125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [166.321185] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [166.321245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [166.321303] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [166.321363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [166.321421] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [166.321482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [166.321543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [166.321607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [166.321673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [166.321738] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [166.321802] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [166.321875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [166.321934] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [166.321996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [166.322058] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [166.322120] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [166.322178] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [166.322236] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [166.322289] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [166.322341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [166.322397] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [166.322451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [166.322507] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [166.322562] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [166.322617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [166.322674] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [166.322727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [166.322781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [166.322844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [166.322901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [166.322962] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [166.323039] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [166.323111] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [166.323184] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [166.323257] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [166.323335] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [166.323409] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [166.323497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [166.323577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [166.323654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [166.323729] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [166.323800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [166.323886] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [166.323940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [166.323996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [166.324054] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [166.324114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [166.324175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [166.324235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [166.324294] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [166.324353] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [166.324411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [166.324468] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [166.324526] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [166.324583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [166.324640] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [166.324697] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [166.324754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [166.324812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [166.324883] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [166.324937] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [166.324999] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [166.325075] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [166.325137] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [166.325199] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [166.325258] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [166.325347] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [166.325436] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [166.325532] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [166.325659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [166.325763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [166.325871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [166.325957] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [166.327380] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [166.329646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [166.329729] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [166.329785] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [166.329845] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [166.329898] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [166.329956] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [166.330022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [166.330082] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [166.330138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [166.330190] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [166.330239] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [166.330288] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [166.330337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [166.330385] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [166.330434] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [166.330521] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [166.341978] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [166.342662] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [166.342743] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [166.342799] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [166.342868] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [166.342919] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [166.342980] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [166.866535] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [166.866539] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [166.866541] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [166.866696] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [166.866785] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [166.866901] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [166.866978] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [166.867116] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [166.867234] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [166.867375] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [166.867450] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [166.867527] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [166.867599] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [166.868490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [166.868561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [166.868631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [166.868697] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [166.868761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [166.868831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [166.868900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [166.868973] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [166.869044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [166.869106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [166.869167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [166.869228] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [166.869288] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [166.869346] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [166.869404] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [166.869462] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [166.869519] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [166.869576] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [166.869631] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [166.869687] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [166.869743] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [166.869799] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [166.869864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [166.869925] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [166.869998] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [166.870061] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [166.870123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [166.870188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [166.870250] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [166.870312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [166.870373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [166.870432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [166.870494] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [166.870556] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [166.870616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [166.870676] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [166.870735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [166.870797] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [166.870868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [166.870936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [166.871130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [166.871198] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [166.871266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [166.871333] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [166.871483] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [166.871548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [166.871607] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [166.871665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [166.871804] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [166.871875] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [166.871936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [166.872009] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [166.872073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [166.872128] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [166.872183] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [166.872478] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [166.872580] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [166.872636] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [166.872688] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [166.872738] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [166.872787] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [166.872847] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [166.872896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [166.872951] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [166.873014] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [166.873064] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [166.873111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [166.873158] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [166.873205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [166.873251] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [166.873317] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [166.873396] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [166.873804] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [166.876159] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [166.893186] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [166.904375] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [166.904757] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [166.905622] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [166.905719] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [166.905785] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [166.905871] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [166.905934] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [166.905995] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [166.906053] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [166.906114] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [166.906177] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [166.908175] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [166.908277] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [166.908346] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [166.909880] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [166.909985] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [166.912672] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [166.916393] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [166.916531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [166.916646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [166.916758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [166.916892] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [166.916999] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [166.917119] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [166.917240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [166.917347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [166.917446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [166.917553] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [166.917650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [166.917748] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [166.917911] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [166.918608] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [166.920614] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [166.921662] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [166.921773] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [166.921929] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [166.942981] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [166.943681] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [166.944090] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [166.944375] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [166.944622] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [166.944955] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [166.945196] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [166.945440] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [166.945446] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [166.945450] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [166.945453] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [166.945458] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [166.945461] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [166.945465] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [166.945469] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [166.945473] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [166.945477] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [166.945907] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [166.946227] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [166.946555] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [166.946884] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [166.947177] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [166.947451] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [166.947737] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [166.948028] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [166.948274] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [166.948548] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [166.949071] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [166.949289] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [166.949509] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [166.949755] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [166.950007] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [166.950208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [166.950407] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [166.950622] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [166.950802] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [166.951025] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [166.951309] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [166.952868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [166.953012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [166.953155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [166.953292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [166.953424] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [166.953559] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [166.953690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [166.953852] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [166.953996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [166.954118] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [166.954260] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [166.954380] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [166.954494] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [166.954608] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [166.954717] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [166.954829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [166.954940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [166.955042] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [166.955143] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [166.955241] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [166.955337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [166.955434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [166.955534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [166.955631] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [166.955723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [166.955819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [166.955910] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [166.955997] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [166.956083] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [166.956178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [166.956272] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [166.956363] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [166.956451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [166.956538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [166.956627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [166.956711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [166.956795] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [166.956903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [166.956996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [166.957086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [166.957644] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [166.957725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [166.957807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [166.957911] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [166.957988] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [166.958062] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [166.958134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [166.958210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [166.958279] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [166.958346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [166.958413] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [166.958480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [166.958917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [166.958991] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [166.959057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [166.959760] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [166.959891] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [166.959957] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [166.960015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [166.960071] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [166.960124] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [166.960177] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [166.960228] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [166.960279] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [166.960328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [166.960377] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [166.960424] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [166.960471] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [166.960518] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [166.960566] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [166.960634] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [166.960722] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [166.962423] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [166.981473] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [167.002766] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [167.003352] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [167.005228] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [167.005491] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [167.009907] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [167.010165] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [167.014030] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [167.014313] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [167.062972] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [167.064207] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [167.064618] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [167.065099] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [167.065476] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [167.065984] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [167.066278] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [167.066621] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [167.067397] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [167.067826] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [167.068239] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [167.068598] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [167.068974] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [167.069318] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [167.069675] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [167.070078] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [167.070477] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [167.070804] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [167.071197] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [167.071528] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [167.071878] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [167.072199] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [167.072511] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [167.073241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [167.073635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [167.074079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [167.074451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [167.074889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [167.075410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [167.075773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [167.076163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [167.076597] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [167.076972] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [167.077300] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [167.077593] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [167.087938] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [167.090127] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [167.090461] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [167.091504] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [167.095514] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [167.095664] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [167.097161] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [167.099681] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [167.099806] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [167.101035] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [167.102987] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [167.103128] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [167.104351] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [167.106296] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [167.106390] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [167.106406] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [167.120422] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [167.123151] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 <7> [167.123634] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [167.123741] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [167.124447] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [167.126004] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [167.126174] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [167.126293] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [167.126390] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [167.126512] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [167.126606] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [167.126681] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [167.126779] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [167.126874] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [167.126875] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [167.126966] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [167.126972] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [167.127056] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [167.127134] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [167.127335] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [167.127399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [167.127405] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [167.130248] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [167.130585] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [167.130695] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [167.130800] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [167.130951] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [167.130957] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [167.130960] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.130961] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [167.130964] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [167.130967] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.130970] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [167.130972] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.130974] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [167.130977] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.130995] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [167.131116] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [167.131235] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [167.131711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [167.131724] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [167.131796] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [167.131798] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [167.131799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.131865] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [167.131869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [167.131873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [167.131877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [167.131882] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [167.132037] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [167.132040] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [167.132043] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [167.132163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [167.132166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [167.132169] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [167.132296] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [167.132299] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [167.132303] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [167.132305] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [167.132308] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [167.132327] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [167.132339] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [167.132343] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [167.132357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [167.132414] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [167.132420] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [167.138578] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [167.139113] fbcon: xedrmfb (fb0) is primary device <7> [167.139901] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [167.140043] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [167.140158] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [167.140278] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [167.140390] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [167.140501] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [167.140596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [167.140685] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [167.140782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [167.140930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [167.141033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [167.141134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [167.141234] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [167.141332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [167.141430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [167.141527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [167.141629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [167.141735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [167.141852] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [167.141956] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [167.142061] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [167.142165] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [167.142269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [167.142372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [167.142475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [167.142595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [167.142701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [167.142813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [167.142924] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [167.143034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [167.143142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [167.143250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [167.143371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [167.143495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [167.143612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [167.143721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [167.143837] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [167.143945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [167.144052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [167.144158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [167.144268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [167.144376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [167.144485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [167.144593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [167.144676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [167.144758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [167.144865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [167.144955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [167.145045] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [167.145134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [167.145218] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [167.145305] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [167.145394] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [167.145483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [167.145584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [167.145703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [167.145830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [167.145948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [167.146064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [167.146180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [167.146295] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [167.146409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [167.146523] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [167.146635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [167.146734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [167.146844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [167.146942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [167.147040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [167.147139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [167.147238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [167.147336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [167.147433] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [167.147532] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [167.147683] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [167.147779] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [167.147970] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [167.148052] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [167.148131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [167.148209] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [167.148285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [167.148361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [167.148454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [167.148574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [167.148697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [167.148836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [167.148961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [167.149086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [167.149212] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [167.149358] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [167.149504] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [167.149650] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [167.149774] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [167.149938] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [167.150072] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [167.150212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [167.150337] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [167.150461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [167.150580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [167.150697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [167.150819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [167.150934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [167.151049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [167.151163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [167.151276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [167.151387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [167.151498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [167.151609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [167.151719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [167.151836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [167.151947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [167.152054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [167.152162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [167.152271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [167.152379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [167.152487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [167.152611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [167.152742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [167.152880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [167.152997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [167.153129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [167.153246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [167.153362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [167.153476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [167.153587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [167.153674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [167.153762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [167.153865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [167.153958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [167.154051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [167.154144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [167.154239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [167.154333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [167.154426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [167.154520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [167.154614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [167.154722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [167.154855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [167.154971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [167.155075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [167.155181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [167.155285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [167.155388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [167.155491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [167.155593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [167.155704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [167.155823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [167.155935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [167.156048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [167.156160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [167.156271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [167.156398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [167.156530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [167.156638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [167.156725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [167.156821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [167.156908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [167.156997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [167.157095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [167.157180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [167.157406] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [167.157494] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [167.157608] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [167.157696] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [167.157802] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [167.157907] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [167.157992] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [167.158074] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [167.158153] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [167.158232] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [167.158311] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [167.158388] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [167.158464] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [167.158547] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [167.158628] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [167.158690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [167.158746] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [167.158819] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [167.158976] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [167.159050] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [167.159152] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [167.159228] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [167.160131] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [167.160203] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [167.160282] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [167.169854] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [167.169939] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [167.170039] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [167.173712] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [167.174264] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [167.196708] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [167.381847] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [167.384048] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [167.385396] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [167.388087] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [167.389697] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [167.391073] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [167.392318] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [167.392716] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [167.395909] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [167.396348] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [167.397271] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [167.397906] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [167.398376] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [167.398959] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [167.414692] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [167.416589] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [167.417118] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [167.418627] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [167.421095] Console: switching to colour frame buffer device 180x56 <6> [167.471056] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [167.471080] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [167.471664] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [167.472236] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [167.472728] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [167.473264] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [167.473729] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [167.474298] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [167.474767] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [167.475263] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [167.475697] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [167.476155] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [167.476592] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [167.476994] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [167.477357] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [167.477680] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [167.478079] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [167.478404] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [167.478725] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [167.479078] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [167.479393] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [167.479694] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [167.480011] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [167.481386] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [167.481404] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [167.481521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [167.481416] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [167.481537] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [167.481768] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [167.482218] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [167.482582] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [167.482944] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [167.483259] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [167.483550] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [167.483874] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [167.484139] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [167.484763] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [167.485282] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [167.485555] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [167.486054] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [167.486567] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [167.486584] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [167.486591] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.486594] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [167.486603] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [167.486610] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.486616] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [167.486624] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.486629] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [167.486636] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.486675] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [167.487172] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [167.487616] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [167.488742] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [167.488750] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [167.488755] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [167.488967] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [167.488981] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [167.488995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [167.489009] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [167.489022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [167.489503] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [167.489516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [167.489527] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [167.489998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [167.490012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [167.490022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [167.490465] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [167.490479] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [167.490492] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [167.490503] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [167.490512] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [167.490589] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [167.490636] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [167.490649] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [167.490709] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [167.491421] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [167.492834] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [167.493249] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [167.494108] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [167.494643] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [167.495216] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [167.495758] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [167.496316] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [167.498387] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [167.537452] Console: switching to colour dummy device 80x25 <7> [167.548213] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [167.548375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [167.548874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [167.549265] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [167.549648] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [167.550636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [167.551198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [167.551787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [167.552509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [167.553180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [167.553749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [167.554428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [167.556059] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [167.564698] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [167.567472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [167.567973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [167.568419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [167.568922] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [167.569461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [167.570056] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [167.570587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [167.571109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [167.571633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [167.572227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [167.572714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [167.573325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [167.573790] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [167.574372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [167.574739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [167.575107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [167.575376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [167.575639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [167.575923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [167.576182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [167.576407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [167.576631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [167.576896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [167.577102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [167.577296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [167.577492] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [167.577681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [167.577888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [167.578071] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [167.578249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [167.578448] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [167.578619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [167.578781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [167.578972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [167.579147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [167.579304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [167.579442] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [167.579580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [167.579718] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [167.579880] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [167.580101] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [167.580244] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [167.580408] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [167.580548] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [167.580698] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [167.580847] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [167.580981] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [167.581141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [167.581263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [167.581377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [167.581489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [167.581598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [167.581699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [167.581812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [167.582079] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [167.582195] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [167.609873] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [167.789929] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [167.790480] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [167.801398] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [167.801924] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [167.801800] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [167.802431] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [167.802526] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [167.853753] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [167.854360] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [167.854231] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [167.854514] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [167.855056] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [167.855738] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [167.855975] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [167.856513] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [167.857256] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [167.857722] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [167.858242] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [167.858752] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [167.859306] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [167.859724] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [167.860195] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [167.860589] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [167.861020] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [167.861410] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [167.861907] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [167.862345] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [167.862758] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [167.863228] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [167.863812] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [167.864243] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [167.864683] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [167.865437] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [167.866018] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [167.866519] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [167.866975] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [167.867468] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [167.891259] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [167.891559] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [167.891788] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [167.892028] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [167.900602] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [167.909181] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [167.918490] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [167.926885] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [167.961547] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [167.962566] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [168.048137] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [168.050182] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [168.106905] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (248 ms remaining) <7> [168.357983] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [168.429509] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [168.431010] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [168.437472] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [168.443117] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [168.465431] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [168.527456] xe 0000:00:02.0: Found custom settings in configfs <6> [168.527494] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [168.528642] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [168.528652] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [168.528775] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [168.528883] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [168.529703] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [168.529945] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [168.530046] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [168.530137] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [168.530222] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [168.530282] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [168.530340] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [168.530397] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [168.530453] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [168.530516] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [168.530576] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [168.530650] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [168.530724] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [168.530814] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [168.530916] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [168.531029] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [168.531125] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [168.531210] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [168.531289] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [168.531367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [168.531444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [168.531520] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [168.531595] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [168.531669] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [168.531743] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [168.531839] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [168.531935] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [168.532030] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [168.532117] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [168.532188] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [168.532260] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [168.532332] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [168.532402] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [168.532473] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [168.532544] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [168.532615] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [168.532686] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [168.532757] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [168.532864] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [168.532956] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [168.533048] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [168.533123] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [168.533205] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [168.533527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [168.533620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [168.533707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [168.534002] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [168.534114] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [168.534193] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [168.534271] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [168.534344] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [168.534415] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [168.534497] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [168.534573] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [168.534646] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [168.534720] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [168.534810] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [168.534907] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [168.534998] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [168.535089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [168.535161] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [168.535234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [168.535305] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [168.535376] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [168.535447] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [168.535517] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.535586] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [168.535655] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [168.535723] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [168.535816] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [168.535929] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [168.536051] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [168.536306] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [168.536385] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [168.536498] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [168.536615] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [168.536754] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [168.536879] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [168.536977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [168.537073] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [168.537173] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [168.537278] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [168.537380] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [168.537481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [168.537588] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [168.537699] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [168.538138] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [168.538630] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [168.538718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [168.538979] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [168.539077] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [168.539100] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [168.539173] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [168.539248] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [168.539249] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [168.539319] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [168.539384] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [168.539444] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [168.539503] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [168.539559] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [168.539615] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [168.539669] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [168.539724] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [168.539755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [168.539791] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [168.539859] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [168.539864] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [168.539927] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [168.539956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [168.539992] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [168.540047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [168.540127] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [168.540201] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [168.540269] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [168.540340] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [168.540419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [168.540493] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [168.540567] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [168.540640] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [168.540706] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [168.540776] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [168.540862] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [168.540952] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [168.541047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [168.541132] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [168.541207] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [168.541292] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [168.541381] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [168.541472] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [168.541561] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [168.541648] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [168.547613] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7> [168.552346] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [168.552480] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [168.552601] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [168.552775] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [168.552933] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <6> [168.553064] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [168.553064] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [168.553179] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [168.553290] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [168.553407] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [168.553515] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [168.553622] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [168.553728] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [168.553910] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [168.554021] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [168.554219] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [168.554329] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [168.554403] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [168.554472] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [168.554535] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [168.554595] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [168.554689] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [168.554795] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [168.555781] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [168.555867] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [168.555972] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [168.565814] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [168.565943] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [168.566022] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [168.810840] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [168.822837] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [168.846817] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [168.882781] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [168.894784] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [168.954787] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [169.302773] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [169.302787] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [169.302789] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [169.302791] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [169.302793] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [169.302795] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [169.302797] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [169.302799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [169.302800] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [169.302803] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [169.302851] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [169.302853] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [169.302854] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [169.302876] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [169.303001] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [169.314761] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [169.326763] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [169.326858] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [169.326942] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [169.327029] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [169.327118] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [169.327297] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [169.327371] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [169.327442] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [169.327511] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [169.327578] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [169.327671] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [169.327901] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [169.328031] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [169.328142] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [169.328571] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [169.328684] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [169.328788] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [169.329034] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [169.329147] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [169.329242] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [169.329587] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [169.329693] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [169.329811] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [169.329880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [169.329943] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [169.330005] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [169.330065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [169.330125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [169.330184] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [169.330247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [169.330310] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [169.330373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [169.330435] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [169.330497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [169.330558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [169.330618] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [169.330678] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [169.330744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [169.330806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [169.330869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [169.330926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [169.330985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [169.331043] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [169.331097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [169.331156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [169.331215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [169.331274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [169.331336] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [169.331393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [169.331451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [169.331503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [169.331556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [169.331613] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [169.331675] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [169.331756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [169.331817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [169.331872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [169.331930] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [169.331999] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [169.332068] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [169.332140] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [169.332211] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [169.332285] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [169.332358] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [169.332436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [169.332496] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [169.332554] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [169.332612] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [169.332668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [169.332723] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [169.332803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [169.332862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [169.332920] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [169.332979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [169.333041] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [169.333107] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [169.333168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [169.333224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [169.333280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [169.333336] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [169.333392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [169.333450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [169.333508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [169.333566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [169.333623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [169.333680] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [169.333743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [169.333804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [169.333863] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [169.333927] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [169.333980] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [169.334032] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [169.334084] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [169.334173] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [169.334260] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [169.334361] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [169.334477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [169.334563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [169.334648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [169.334724] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [169.336230] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [169.338491] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [169.338576] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [169.338632] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [169.338685] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [169.338745] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [169.338797] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [169.338856] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [169.338913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [169.338967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [169.339019] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [169.339069] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [169.339117] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [169.339165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [169.339214] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [169.339267] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [169.339357] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [169.349892] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [169.350570] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [169.350659] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [169.350721] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [169.350796] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [169.350854] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [169.350914] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [169.867187] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [169.867193] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [169.867194] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [169.867339] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [169.867442] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [169.867534] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [169.867616] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [169.867740] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [169.867851] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [169.867988] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [169.868076] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [169.868160] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [169.868233] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [169.869070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [169.869141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [169.869211] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [169.869276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [169.869339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [169.869404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [169.869466] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [169.869530] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [169.869592] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [169.869654] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [169.869721] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [169.869787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [169.869849] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [169.869908] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [169.869966] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [169.870025] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [169.870083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [169.870140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [169.870197] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [169.870254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [169.870310] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [169.870370] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [169.870433] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [169.870497] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [169.870561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [169.870623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [169.870687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [169.870769] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [169.870833] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [169.870900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [169.870961] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [169.871021] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [169.871082] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [169.871144] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [169.871204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [169.871265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [169.871325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [169.871389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [169.871451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [169.871513] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [169.871696] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [169.871777] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [169.871846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [169.871917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [169.872123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [169.872227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [169.872316] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [169.872386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [169.872541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [169.872608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [169.872672] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [169.872753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [169.872825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [169.872903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [169.872963] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [169.873273] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [169.873372] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [169.873427] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [169.873479] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [169.873531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [169.873582] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [169.873632] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [169.873681] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [169.873739] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [169.873789] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [169.873838] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [169.873892] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [169.873955] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [169.874003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [169.874050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [169.874117] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [169.874198] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [169.874595] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [169.876493] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [169.893746] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [169.904884] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [169.905241] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [169.906204] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [169.906310] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [169.906387] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [169.906457] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [169.906529] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [169.906600] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [169.906667] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [169.906761] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [169.906839] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [169.908616] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [169.908734] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [169.908819] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [169.910500] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [169.910596] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [169.913592] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [169.917196] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [169.917321] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [169.917419] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [169.917510] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [169.917598] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [169.917697] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [169.917817] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [169.917904] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [169.917989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [169.918077] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [169.918164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [169.918251] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [169.918337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [169.918423] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [169.919106] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [169.920819] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [169.921892] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [169.922013] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [169.922163] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [169.943868] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [169.944582] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [169.944994] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [169.945286] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [169.945558] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [169.945883] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [169.946146] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [169.946413] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [169.946419] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [169.946424] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [169.946427] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [169.946431] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [169.946434] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [169.946438] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [169.946442] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [169.946445] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [169.946449] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [169.946929] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [169.947276] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [169.947634] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [169.948010] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [169.948376] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [169.948696] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [169.949049] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [169.949326] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [169.949593] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [169.949893] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [169.950420] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [169.950656] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [169.950929] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [169.951177] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [169.951415] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [169.951639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [169.951877] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [169.952089] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [169.952281] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [169.952472] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [169.952752] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [169.954463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [169.954614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [169.954766] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [169.954909] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [169.955048] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [169.955194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [169.955323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [169.955464] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [169.955596] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [169.955734] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [169.955878] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [169.956001] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [169.956121] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [169.956235] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [169.956349] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [169.956461] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [169.956588] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [169.956721] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [169.956840] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [169.956940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [169.957040] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [169.957141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [169.957242] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [169.957338] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [169.957434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [169.957530] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [169.957624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [169.957722] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [169.957812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [169.957909] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [169.958007] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [169.958101] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [169.958192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [169.958287] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [169.958373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [169.958458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [169.958544] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [169.958627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [169.958709] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [169.958816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [169.959383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [169.959468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [169.959550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [169.959631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [169.959708] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [169.959803] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [169.959876] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [169.959949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [169.960018] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [169.960086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [169.960153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [169.960220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [169.960649] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [169.960721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [169.960789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [169.961443] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [169.961561] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [169.961623] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [169.961679] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [169.961746] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [169.961800] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [169.961852] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [169.961903] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [169.961954] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [169.962004] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [169.962053] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [169.962101] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [169.962150] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [169.962199] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [169.962246] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [169.962321] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [169.962406] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [169.964421] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [169.984409] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [170.005703] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [170.006281] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [170.007896] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [170.008058] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [170.011315] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [170.011485] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [170.014418] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [170.014688] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [170.061357] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [170.063808] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [170.064769] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [170.065604] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [170.066443] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [170.067638] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [170.068403] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [170.069148] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [170.071202] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [170.072171] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [170.073001] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [170.073632] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [170.074273] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [170.074859] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [170.075364] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [170.075888] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [170.076332] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [170.076778] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [170.077204] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [170.077570] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [170.077950] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [170.078298] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [170.078620] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [170.079539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [170.079956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [170.080306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [170.080623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [170.080950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [170.081400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [170.081701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [170.081985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [170.082367] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [170.082659] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [170.082943] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [170.083179] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [170.090980] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [170.092273] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [170.092447] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [170.092935] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [170.093936] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [170.094001] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [170.094617] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [170.095486] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [170.095553] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [170.096276] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [170.097302] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [170.097373] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [170.098124] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [170.099527] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [170.099580] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [170.099589] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [170.114410] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [170.119775] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 <7> [170.121858] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [170.122008] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [170.122571] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [170.124161] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [170.124353] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [170.124488] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [170.124585] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [170.124703] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [170.125407] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [170.125504] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [170.125576] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [170.125645] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [170.125690] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [170.125803] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [170.125895] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [170.125926] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [170.126019] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [170.126107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [170.126105] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [170.126115] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [170.126580] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [170.126959] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [170.127070] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [170.127180] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [170.127306] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [170.127312] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.127314] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.127316] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [170.127318] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [170.127321] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.127322] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [170.127325] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.127326] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [170.127329] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.127346] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [170.127468] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [170.127584] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [170.128109] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [170.128121] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [170.128202] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.128204] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.128206] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.128261] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [170.128265] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [170.128269] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [170.128274] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [170.128278] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [170.128421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [170.128424] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [170.128428] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [170.128543] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [170.128545] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [170.128548] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [170.128662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [170.128665] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [170.128668] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [170.128670] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [170.128673] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [170.128692] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [170.128706] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [170.128716] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [170.128729] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [170.128780] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [170.128786] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [170.135342] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [170.135741] fbcon: xedrmfb (fb0) is primary device <7> [170.136430] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [170.136532] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [170.136617] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [170.136721] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [170.136833] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [170.136944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [170.137052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [170.137150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [170.137232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [170.137311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [170.137391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [170.137478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [170.137585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [170.137811] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [170.137950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [170.138088] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [170.138225] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [170.138361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [170.138494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [170.138624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [170.138767] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [170.138895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [170.139021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [170.139152] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [170.139276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [170.139398] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [170.139521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [170.139672] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [170.139815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [170.139932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [170.140050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [170.140166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [170.140280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [170.140395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [170.140510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [170.140625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [170.140789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [170.140912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [170.141037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [170.141161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [170.141284] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [170.141406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [170.141528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [170.141648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [170.141765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [170.141867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [170.141968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [170.142070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [170.142173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [170.142275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [170.142376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [170.142477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [170.142578] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [170.142689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [170.142838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [170.142974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [170.143094] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [170.143209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [170.143325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [170.143440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [170.143555] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [170.143658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [170.143763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [170.143854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [170.143945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [170.144036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [170.144127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [170.144219] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [170.144314] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [170.144410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [170.144507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [170.144608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [170.144721] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [170.144884] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [170.144984] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [170.145088] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [170.145182] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [170.145263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [170.145344] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [170.145425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [170.145504] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [170.145602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [170.145711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [170.145814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [170.145914] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [170.146014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [170.146113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [170.146214] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [170.146337] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [170.146454] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [170.146560] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [170.146669] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [170.146998] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [170.147175] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [170.147343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [170.147501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [170.147658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [170.147841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [170.147994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [170.148146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [170.148296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [170.148446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [170.148596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [170.148748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [170.148896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [170.149047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [170.149201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [170.149353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [170.149507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [170.149659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [170.149832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [170.149984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [170.150138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [170.150321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [170.150493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [170.150648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [170.150823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [170.150978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [170.151129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [170.151281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [170.151443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [170.151592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [170.151754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [170.151910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [170.152065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [170.152218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [170.152372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [170.152525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [170.152661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [170.152776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [170.152875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [170.152973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [170.153072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [170.153170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [170.153268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [170.153369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [170.153483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [170.153597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [170.153721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [170.153837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [170.153954] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [170.154070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [170.154185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [170.154303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [170.154442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [170.154566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [170.154692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [170.154804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [170.154895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [170.154984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [170.155073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [170.155153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [170.155242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [170.155330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [170.155420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [170.155507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [170.155577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [170.155645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [170.155717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [170.155968] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [170.156058] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [170.156143] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [170.156219] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [170.156304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [170.156375] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [170.156443] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [170.156506] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [170.156567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [170.156628] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [170.156693] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [170.156781] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [170.156857] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [170.156931] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [170.157005] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [170.157076] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [170.157145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [170.157234] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [170.157396] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [170.157456] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [170.157547] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [170.157620] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [170.158892] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [170.158982] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [170.159069] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <6> [170.168423] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [170.168689] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [170.168822] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [170.168949] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [170.169068] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [170.191494] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [170.377432] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [170.379854] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [170.381005] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [170.382341] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [170.383633] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [170.384892] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [170.386117] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [170.386586] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [170.389317] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [170.389925] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [170.391928] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [170.392502] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [170.392980] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [170.393418] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [170.409306] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [170.411253] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [170.411855] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [170.413471] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [170.415998] Console: switching to colour frame buffer device 180x56 <6> [170.465395] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [170.465419] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [170.466063] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [170.466632] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [170.467213] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [170.467728] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [170.468274] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [170.468777] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [170.469202] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [170.469610] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [170.470021] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [170.470418] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [170.470801] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [170.471175] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [170.471502] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [170.471847] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [170.472147] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [170.472445] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [170.472742] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [170.473051] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [170.473303] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [170.473555] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [170.473816] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [170.475209] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [170.475467] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [170.475778] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [170.475961] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [170.476004] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [170.476075] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [170.476364] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [170.476642] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [170.476789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [170.476822] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [170.476919] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [170.477160] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [170.477388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [170.478954] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [170.480832] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [170.481459] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [170.482156] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [170.483935] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [170.483973] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.483986] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.483994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [170.484012] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [170.484029] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.484040] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [170.484096] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.484105] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [170.484123] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.484273] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [170.484790] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [170.485009] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [170.485666] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [170.488806] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.488825] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.488834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.488651] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [170.489309] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [170.489162] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [170.489388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [170.489416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [170.489445] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [170.489611] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [170.489471] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [170.490143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [170.490750] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [170.491288] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [170.491865] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [170.492606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [170.492654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [170.492674] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [170.493438] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [170.493463] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [170.493481] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [170.494124] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [170.494143] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [170.494163] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [170.494177] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [170.494191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [170.495247] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [170.495381] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [170.495401] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [170.495587] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [170.510518] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [170.542883] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [170.542907] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [170.543087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [170.543109] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [170.543921] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [170.544491] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [170.544920] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [170.545252] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [170.545680] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [170.545709] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.545715] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.545718] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [170.545727] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [170.545733] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.545739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [170.545746] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.545750] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [170.545758] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.545801] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [170.546151] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [170.546489] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [170.547376] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.547384] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [170.547388] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [170.547562] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [170.547572] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [170.547583] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [170.547595] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [170.547606] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [170.548047] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [170.548061] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [170.548071] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [170.548454] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [170.548464] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [170.548473] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [170.548904] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [170.548914] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [170.548922] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [170.548929] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [170.548936] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [170.549006] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [170.549044] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [170.549053] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [170.549095] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [170.559727] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [170.583954] Console: switching to colour dummy device 80x25 <7> [170.593354] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [170.593557] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [170.594174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [170.594636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [170.595194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [170.595716] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [170.596242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [170.596959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [170.597657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [170.598321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [170.599005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [170.599670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [170.601140] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [170.604113] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [170.609298] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [170.614371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [170.614874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [170.615297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [170.615678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [170.616186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [170.616520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [170.616890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [170.617181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [170.617470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [170.618010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [170.618528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [170.619043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [170.619498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [170.620126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [170.620671] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [170.621432] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [170.622004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [170.622439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [170.622940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [170.623368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [170.623855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [170.624232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [170.624628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [170.624935] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [170.625212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [170.625489] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [170.625784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [170.626052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [170.626293] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [170.626526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [170.626883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [170.627134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [170.627353] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [170.627572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [170.627840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [170.628037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [170.628236] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [170.628426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [170.628619] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [170.628823] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [170.629180] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [170.629396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [170.629618] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [170.629889] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [170.630105] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [170.630302] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [170.630486] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [170.630714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [170.630925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [170.631097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [170.631257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [170.631408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [170.631556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [170.631704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [170.632030] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [170.632167] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [170.837898] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [170.838417] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [170.844148] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [170.844639] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [170.845203] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [170.897003] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [170.898060] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [170.905734] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [170.906180] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [170.906218] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [170.907574] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [170.908224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [170.908887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [170.909341] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [170.909716] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [170.910056] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [170.910400] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [170.910712] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [170.910999] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [170.911324] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [170.911599] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [170.911914] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [170.912241] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [170.912538] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [170.912884] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [170.913197] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [170.913630] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [170.913967] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [170.914228] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [170.914800] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [170.915264] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [170.915704] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [170.916042] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [170.916433] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [170.934042] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [170.934657] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [170.935187] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [170.935742] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [170.945465] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [170.952795] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [170.962409] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [170.972538] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [171.005646] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [171.006435] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [171.081131] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [171.083780] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [171.156746] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining) <7> [171.413796] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [171.424656] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [171.425733] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [171.434139] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [171.441867] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [171.467638] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [171.510943] xe 0000:00:02.0: Found custom settings in configfs <6> [171.511017] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [171.512440] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [171.512449] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [171.512555] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [171.512633] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [171.513893] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [171.514129] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [171.514208] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [171.514295] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [171.514377] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [171.514435] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [171.514489] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [171.514542] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [171.514595] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [171.514655] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [171.514754] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [171.514857] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [171.514950] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [171.515033] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [171.515109] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [171.515196] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [171.515281] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [171.515365] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [171.515444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [171.515523] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [171.515603] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [171.515685] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [171.515783] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [171.515883] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [171.515979] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [171.516054] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [171.516128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [171.516200] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [171.516273] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [171.516344] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [171.516416] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [171.516486] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [171.516557] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [171.516628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [171.516716] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [171.516817] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [171.516922] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [171.517011] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [171.517080] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [171.517149] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [171.517218] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [171.517286] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [171.517361] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [171.517803] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [171.517931] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [171.518039] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [171.518138] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [171.518234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [171.518339] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [171.518448] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [171.518541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [171.518629] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [171.518751] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [171.518862] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [171.518968] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [171.519056] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [171.519155] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [171.519261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [171.519359] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [171.519446] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [171.519531] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [171.519621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [171.519843] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [171.519945] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [171.520027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [171.520102] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [171.520177] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [171.520250] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [171.520324] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [171.520400] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [171.520491] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [171.520590] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [171.520773] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [171.520875] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [171.521011] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [171.521125] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [171.521267] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [171.521360] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [171.521436] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [171.521514] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [171.521617] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [171.521738] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [171.521870] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [171.522010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [171.522125] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [171.522239] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [171.522628] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [171.523221] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [171.523310] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [171.523384] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [171.523456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [171.523528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [171.523599] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [171.523681] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [171.523774] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [171.523866] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [171.523958] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [171.524031] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [171.524101] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [171.524171] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [171.524241] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [171.524328] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [171.524407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [171.524486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [171.524563] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [171.524633] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [171.524864] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [171.524973] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [171.525064] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [171.525156] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [171.525233] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [171.525309] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [171.525382] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [171.525455] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [171.525528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [171.525597] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [171.525666] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [171.526135] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [171.526249] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [171.526313] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [171.526370] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [171.526425] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [171.526478] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [171.526530] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [171.526581] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [171.526632] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [171.526696] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [171.526762] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [171.526826] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [171.526890] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [171.526953] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [171.533223] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7> [171.538377] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [171.538508] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <6> [171.538589] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [171.538626] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [171.538781] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [171.538927] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [171.539044] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [171.539157] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [171.539268] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [171.539385] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [171.539494] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [171.539601] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [171.539722] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [171.539828] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [171.539935] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [171.540047] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [171.540153] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [171.540238] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [171.540321] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [171.540399] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [171.540477] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [171.540584] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [171.540695] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [171.541685] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [171.541790] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [171.541910] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [171.551719] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [171.551976] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [171.552192] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [171.794736] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [171.806738] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [171.830720] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [171.866689] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [171.878681] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [171.938693] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [172.286676] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [172.286691] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [172.286693] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [172.286694] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [172.286696] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [172.286698] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [172.286699] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [172.286701] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [172.286702] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [172.286704] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [172.286749] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [172.286750] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [172.286751] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [172.286771] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [172.286847] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [172.298664] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [172.310667] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [172.310758] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [172.310840] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [172.310926] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [172.311015] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [172.311191] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [172.311263] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [172.311334] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [172.311405] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [172.311467] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [172.311559] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [172.311779] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [172.311920] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [172.312039] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [172.312486] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [172.312601] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [172.312711] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [172.312949] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [172.313051] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [172.313138] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [172.313462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [172.313544] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [172.313623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [172.313701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [172.313766] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [172.313830] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [172.313891] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [172.313952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [172.314011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [172.314070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [172.314128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [172.314186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [172.314243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [172.314299] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [172.314354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [172.314409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [172.314465] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [172.314519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [172.314574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [172.314629] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [172.314701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [172.314759] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [172.314818] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [172.314872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [172.314926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [172.314980] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [172.315033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [172.315089] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [172.315140] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [172.315193] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [172.315245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [172.315300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [172.315359] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [172.315416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [172.315476] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [172.315536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [172.315596] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [172.315670] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [172.315740] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [172.315809] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [172.315881] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [172.315953] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [172.316024] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [172.316091] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [172.316162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [172.316221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [172.316279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [172.316337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [172.316393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [172.316448] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [172.316503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [172.316561] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [172.316619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [172.316690] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [172.316744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [172.316796] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [172.316848] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [172.316899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [172.316950] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [172.317000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [172.317051] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [172.317107] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [172.317169] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [172.317230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [172.317291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [172.317351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [172.317404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [172.317456] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [172.317510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [172.317571] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [172.317627] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [172.317701] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [172.317752] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [172.317834] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [172.317915] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [172.318011] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [172.318119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [172.318199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [172.318277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [172.318354] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [172.319774] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [172.322001] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [172.322094] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [172.322159] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [172.322212] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [172.322263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [172.322314] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [172.322364] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [172.322414] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [172.322462] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [172.322510] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [172.322558] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [172.322606] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [172.322665] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [172.322713] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [172.322762] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [172.322847] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [172.333800] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [172.334481] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [172.334564] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [172.334620] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [172.334695] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [172.334747] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [172.334801] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [172.857801] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [172.857806] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [172.857807] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [172.857988] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [172.858087] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [172.858171] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [172.858244] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [172.858357] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [172.858457] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [172.858591] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [172.858684] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [172.858769] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [172.858857] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [172.860042] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [172.860147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [172.860230] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [172.860305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [172.860376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [172.860447] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [172.860514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [172.860582] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [172.860659] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [172.860728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [172.860794] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [172.860862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [172.860925] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [172.860985] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [172.861044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [172.861103] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [172.861162] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [172.861222] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [172.861282] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [172.861340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [172.861399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [172.861457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [172.861514] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [172.861571] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [172.861630] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [172.861687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [172.861760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [172.861842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [172.861907] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [172.861971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [172.862034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [172.862096] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [172.862162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [172.862228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [172.862292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [172.862356] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [172.862419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [172.862484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [172.862549] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [172.862613] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [172.862835] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [172.862905] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [172.862965] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [172.863023] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [172.863166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [172.863226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [172.863284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [172.863342] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [172.863484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [172.863547] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [172.863608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [172.863682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [172.863744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [172.863812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [172.863884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [172.864213] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [172.864320] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [172.864374] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [172.864426] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [172.864477] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [172.864528] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [172.864578] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [172.864634] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [172.864684] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [172.864742] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [172.864805] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [172.864861] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [172.864908] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [172.864955] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [172.865002] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [172.865069] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [172.865148] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [172.865564] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [172.867519] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [172.884607] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [172.895776] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [172.896166] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [172.897304] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [172.897520] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [172.897603] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [172.897691] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [172.897767] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [172.897838] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [172.897907] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [172.897981] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [172.898061] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [172.900116] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [172.900251] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [172.900338] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [172.901698] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [172.901808] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [172.904093] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [172.908050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [172.908199] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [172.908324] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [172.908440] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [172.908552] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [172.908718] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [172.908845] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [172.908956] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [172.909067] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [172.909176] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [172.909285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [172.909394] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [172.909501] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [172.909610] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [172.910433] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [172.912270] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [172.913354] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [172.913497] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [172.913661] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [172.934917] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [172.935676] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [172.936019] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [172.936311] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [172.936659] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [172.936933] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [172.937238] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [172.937506] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [172.937512] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [172.937516] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [172.937520] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [172.937524] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [172.937528] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [172.937533] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [172.937537] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [172.937542] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [172.937546] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [172.938027] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [172.938378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [172.938834] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [172.939172] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [172.939504] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [172.939843] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [172.940157] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [172.940437] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [172.940720] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [172.941010] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [172.941554] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [172.941816] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [172.942075] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [172.942324] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [172.942563] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [172.942809] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [172.943059] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [172.943263] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [172.943457] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [172.943659] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [172.943974] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [172.945551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [172.945722] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [172.945870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [172.946013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [172.946149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [172.946285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [172.946420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [172.946566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [172.946711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [172.946856] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [172.947006] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [172.947126] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [172.947243] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [172.947357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [172.947469] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [172.947597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [172.947750] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [172.947870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [172.947981] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [172.948081] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [172.948177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [172.948273] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [172.948367] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [172.948464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [172.948561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [172.948667] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [172.948758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [172.948847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [172.948932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [172.949029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [172.949125] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [172.949219] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [172.949309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [172.949396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [172.949482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [172.949567] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [172.949661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [172.949745] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [172.949825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [172.949904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [172.950461] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [172.950545] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [172.950634] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [172.950718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [172.950796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [172.950871] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [172.950944] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [172.951014] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [172.951084] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [172.951152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [172.951227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [172.951302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [172.951840] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [172.951972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [172.952062] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [172.952782] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [172.952896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [172.952959] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [172.953022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [172.953083] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [172.953142] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [172.953197] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [172.953246] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [172.953295] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [172.953345] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [172.953394] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [172.953442] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [172.953491] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [172.953538] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [172.953585] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [172.953686] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [172.953782] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [172.955547] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [172.986753] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [173.007886] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [173.008400] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [173.010659] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [173.010971] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [173.015941] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [173.016316] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [173.022228] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [173.022595] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [173.071403] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [173.072877] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [173.073300] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [173.073711] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [173.074120] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [173.074699] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [173.075025] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [173.075337] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [173.076168] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [173.076586] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [173.077110] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [173.077509] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [173.077931] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [173.078312] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [173.078741] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [173.079111] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [173.079484] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [173.079884] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [173.080255] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [173.080673] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [173.081039] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [173.081392] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [173.081828] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [173.082610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [173.083128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [173.083553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [173.083992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [173.084422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [173.084995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [173.085341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [173.085687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [173.086152] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [173.086814] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [173.087141] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [173.087411] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [173.097975] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [173.099899] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [173.100184] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [173.100877] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [173.102786] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [173.102911] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [173.103953] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [173.105038] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [173.105141] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [173.106155] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [173.107685] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [173.107733] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [173.108272] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [173.109125] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [173.109164] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [173.109173] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [173.119564] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [173.122746] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 <7> [173.123268] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [173.123375] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [173.124362] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [173.125522] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [173.126365] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [173.126447] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [173.126524] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [173.126593] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [173.126809] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [173.126921] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [173.127032] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [173.127108] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [173.127208] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [173.127285] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [173.127357] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [173.127460] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [173.127535] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [173.127785] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [173.127913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [173.127919] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [173.128359] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [173.128676] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [173.128794] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [173.128906] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [173.129030] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [173.129036] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.129038] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.129040] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [173.129043] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [173.129045] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.129048] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [173.129051] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.129053] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [173.129056] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.129073] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [173.129193] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [173.129298] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [173.129772] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [173.129785] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [173.129861] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.129863] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.129865] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.129923] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [173.129927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [173.129931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [173.129935] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [173.129939] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [173.130089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [173.130093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [173.130096] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [173.130221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [173.130224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [173.130227] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [173.130348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [173.130351] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [173.130355] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [173.130357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [173.130360] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [173.130378] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.130392] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [173.130395] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.130409] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [173.130463] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [173.130470] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [173.136699] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [173.137192] fbcon: xedrmfb (fb0) is primary device <7> [173.138336] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [173.138470] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [173.138594] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [173.138869] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [173.139091] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [173.139310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [173.139521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [173.139750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [173.139949] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [173.140144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [173.140339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [173.140529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [173.140759] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [173.140951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [173.141145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [173.141335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [173.141566] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [173.141778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [173.141964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [173.142179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [173.142373] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [173.142567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [173.142783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [173.142964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [173.143150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [173.143358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [173.143550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [173.143740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [173.143903] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [173.144066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [173.144232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [173.144397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [173.144584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [173.144784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [173.144937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [173.145100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [173.145246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [173.145388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [173.145532] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [173.145682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [173.145802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [173.145919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [173.146037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [173.146152] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [173.146267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [173.146382] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [173.146497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [173.146612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [173.146795] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [173.146951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [173.147106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [173.147259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [173.147414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [173.147567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [173.147731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [173.147871] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [173.148009] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [173.148147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [173.148284] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [173.148426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [173.148564] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [173.148751] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [173.148900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [173.149046] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [173.149188] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [173.149330] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [173.149472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [173.149653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [173.149804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [173.149953] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [173.150103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [173.150252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [173.150402] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [173.150733] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [173.150879] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [173.151023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [173.151146] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [173.151258] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [173.151369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [173.151480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [173.151589] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [173.151768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [173.151935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [173.152094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [173.152253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [173.152412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [173.152595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [173.152790] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [173.152980] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [173.153136] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [173.153287] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [173.153438] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [173.153631] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [173.153781] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [173.153930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [173.154087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [173.154242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [173.154417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [173.154588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [173.154762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [173.154906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [173.155049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [173.155210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [173.155355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [173.155498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [173.155631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [173.155731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [173.155830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [173.155928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [173.156027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [173.156125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [173.156234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [173.156343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [173.156443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [173.156544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [173.156649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [173.156777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [173.156911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [173.157062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [173.157220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [173.157356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [173.157486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [173.157624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [173.157720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [173.157809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [173.157898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [173.157976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [173.158047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [173.158121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [173.158195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [173.158268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [173.158341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [173.158414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [173.158487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [173.158561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [173.158635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [173.158719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [173.158805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [173.158902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [173.158994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [173.159077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [173.159153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [173.159220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [173.159287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [173.159355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [173.159424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [173.159493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [173.159566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [173.159663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [173.159752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [173.159841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [173.159930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [173.160019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [173.160107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [173.160196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [173.160276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [173.160355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [173.160433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [173.160512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [173.160764] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [173.160914] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [173.161053] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [173.161157] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [173.161281] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [173.161382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [173.161483] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [173.161580] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [173.161690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [173.161768] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [173.161845] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [173.161920] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [173.161993] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [173.162057] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [173.162119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [173.162181] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [173.162242] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [173.162317] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [173.162463] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [173.162527] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [173.162624] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [173.162717] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [173.163632] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [173.163723] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [173.163833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [173.173795] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [173.173915] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [173.174007] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [173.178828] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [173.179072] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [173.201538] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [173.389184] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [173.391507] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [173.392865] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [173.394052] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [173.395594] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [173.397201] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [173.398578] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [173.399276] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [173.401086] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [173.401699] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [173.402677] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [173.403280] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [173.403772] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [173.404333] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [173.420177] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [173.422179] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [173.422758] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [173.424304] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [173.426907] Console: switching to colour frame buffer device 180x56 <6> [173.476316] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [173.476342] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [173.476983] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [173.477526] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [173.478109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [173.478629] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [173.479152] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [173.479652] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [173.480167] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [173.480589] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [173.481071] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [173.481456] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [173.481880] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [173.482230] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [173.482600] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [173.482967] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [173.483270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [173.483581] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [173.483968] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [173.484239] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [173.484495] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [173.484766] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [173.485052] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [173.486168] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [173.486395] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [173.486691] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [173.486962] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [173.487215] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [173.487456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [173.487821] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [173.488249] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [173.488700] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [173.489129] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [173.489673] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [173.495419] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <6> [173.498581] [IGT] xe_configfs: finished subtest ctx-restore-post-bb, SUCCESS <6> [173.499770] [IGT] xe_configfs: exiting, ret=0 <7> [173.500154] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [173.500548] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [173.500938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [173.501257] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [173.501601] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [173.503592] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [173.503632] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [173.504366] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [173.504389] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [173.508969] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [173.509769] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [173.510303] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [173.510869] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [173.511906] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [173.511923] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.511930] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.511933] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [173.511942] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [173.511949] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.511954] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [173.511977] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.511983] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [173.511991] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.512059] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [173.512450] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [173.512867] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [173.514078] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.514087] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.514092] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.514279] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [173.514304] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [173.514316] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [173.514328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [173.514339] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [173.514877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [173.514890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [173.514900] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [173.515352] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [173.515363] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [173.515372] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [173.515738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [173.515745] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [173.515753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [173.515760] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [173.515766] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [173.516009] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.516053] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [173.516059] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [173.516128] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [173.538002] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [173.553362] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [173.553380] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [173.553479] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [173.553495] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [173.554424] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [173.555211] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [173.555705] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [173.556204] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [173.556716] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [173.556735] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.556743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.556747] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [173.556758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [173.556768] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.556777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [173.556788] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.556794] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [173.556802] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.556839] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [173.557239] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [173.557685] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [173.558622] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.558628] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [173.558632] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [173.558786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [173.558801] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [173.558814] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [173.558836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [173.558848] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [173.559250] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [173.559263] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [173.559273] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [173.559688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [173.559703] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [173.559712] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [173.560115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [173.560126] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [173.560137] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [173.560146] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [173.560154] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [173.560215] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.560253] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [173.560266] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [173.560306] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [173.570355] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [173.571993] Console: switching to colour dummy device 80x25 <7> [173.586997] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [173.587111] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [173.587373] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [173.587586] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [173.587866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [173.588076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [173.588332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [173.588636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [173.588898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [173.589142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [173.589370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [173.589652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [173.590313] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [173.603409] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [173.605796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [173.606226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [173.606681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [173.607091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [173.607415] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [173.607890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [173.608413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [173.608945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [173.609477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [173.610047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [173.610507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [173.611099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [173.611618] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [173.612086] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [173.612533] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [173.613047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [173.613521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [173.614021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [173.614459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [173.615286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [173.615753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [173.616191] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [173.616584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [173.617036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [173.617366] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [173.617416] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [173.617801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [173.618189] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [173.618552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [173.618943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [173.619275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [173.619653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [173.619980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [173.620310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [173.620635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [173.620879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [173.621123] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [173.621365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [173.621619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [173.621929] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [173.622233] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [173.622614] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [173.622820] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [173.623094] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [173.623371] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [173.623743] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [173.623988] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [173.624222] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [173.624504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [173.624800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [173.625003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [173.625201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [173.625395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [173.625584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [173.625837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [173.626257] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [173.626443] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [173.829832] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [173.830569] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [173.841227] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [173.841825] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [173.841612] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [173.842311] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [173.842675] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [173.893444] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [173.894081] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [173.894204] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [173.894127] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [173.894892] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [173.895537] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [173.895688] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [173.896169] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [173.896810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [173.897250] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [173.897717] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [173.898090] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [173.898447] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [173.898904] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [173.899308] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [173.899726] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [173.900066] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [173.900364] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [173.900650] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [173.900915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [173.901223] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [173.901477] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [173.901870] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [173.902140] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [173.902397] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [173.902958] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [173.903411] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [173.903870] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [173.904201] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [173.904622] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [173.931166] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [173.931471] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [173.931752] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [173.932083] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [173.937372] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [173.943178] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [173.957383] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [173.963187] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [174.004422] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [174.005796] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [174.076676] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [174.079614] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [174.144784] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining) <7> [174.397805] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [174.448833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [174.449821] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [174.458357] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [174.465288] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [174.487467] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [174.534241] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [174.536617] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [174.536630] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [174.536751] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [174.536848] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [174.537804] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [174.537943] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [174.538029] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [174.538121] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [174.538204] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [174.538272] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [174.538336] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [174.538394] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [174.538448] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [174.538508] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [174.538566] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [174.538676] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [174.538770] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [174.538864] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [174.538961] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [174.539054] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [174.539140] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [174.539224] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [174.539303] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [174.539381] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [174.539459] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [174.539537] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [174.539633] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [174.539735] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [174.539837] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [174.539940] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [174.540032] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [174.540116] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [174.540199] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [174.540277] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [174.540351] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [174.540425] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [174.540499] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [174.540577] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [174.540664] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [174.540768] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [174.540876] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [174.540967] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [174.541040] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [174.541111] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [174.541181] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [174.541258] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [174.541344] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [174.541756] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [174.541896] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [174.542008] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [174.542109] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [174.542205] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [174.542309] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [174.542421] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [174.542519] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [174.542639] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [174.542778] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [174.542890] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [174.542990] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [174.543076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [174.543163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [174.543251] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [174.543337] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [174.543422] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [174.543499] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [174.543592] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [174.543693] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [174.543796] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [174.543895] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [174.543989] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [174.544076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [174.544153] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [174.544223] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [174.544301] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [174.544394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [174.544496] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [174.544747] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [174.544855] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [174.544984] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [174.545102] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [174.545247] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [174.545342] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [174.545420] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [174.545500] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [174.545611] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [174.545745] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [174.545874] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [174.545991] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [174.546105] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [174.546213] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [174.546716] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [174.547762] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [174.547882] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [174.547978] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [174.548054] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [174.548128] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [174.548201] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [174.548285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [174.548356] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [174.548428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [174.548499] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [174.548570] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [174.548669] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [174.548762] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [174.548856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [174.548959] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [174.548960] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [174.549050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [174.549110] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [174.549127] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [174.549190] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [174.549202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [174.549261] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [174.549276] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [174.549330] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [174.549350] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [174.549395] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [174.549423] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [174.549461] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [174.549497] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [174.549524] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [174.549581] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [174.549595] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [174.549668] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [174.549670] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [174.549740] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [174.549763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [174.549809] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [174.549856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [174.549877] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [174.549935] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [174.549939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [174.550009] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [174.550079] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [174.550154] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [174.557621] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [174.561661] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [174.561772] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [174.561902] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [174.562022] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [174.562159] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [174.562313] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [174.562435] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [174.562548] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [174.562692] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [174.562811] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [174.562922] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [174.563032] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [174.563142] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [174.563250] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [174.563359] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [174.563470] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [174.563593] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [174.563682] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [174.563768] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [174.563851] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [174.563932] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [174.564044] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [174.564167] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [174.565518] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [174.565594] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [174.565706] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [174.575627] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [174.575752] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [174.575830] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [174.817652] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [174.829636] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [174.853624] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [174.889609] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [174.901594] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [174.963613] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [175.311590] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [175.311605] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [175.311608] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [175.311609] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [175.311612] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [175.311614] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [175.311616] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [175.311618] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [175.311619] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [175.311620] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [175.311663] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [175.311664] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [175.311665] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [175.311687] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [175.311802] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [175.323605] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [175.335577] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [175.335681] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [175.335766] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [175.335866] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [175.335956] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [175.336114] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [175.336189] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [175.336262] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [175.336333] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [175.336401] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [175.336497] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [175.336730] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [175.336875] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [175.336991] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [175.337433] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [175.337547] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [175.337659] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [175.337889] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [175.337995] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [175.338083] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [175.338412] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [175.338502] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [175.338605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [175.338670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [175.338736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [175.338799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [175.338862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [175.338924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [175.338984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [175.339044] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [175.339103] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [175.339161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [175.339218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [175.339276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [175.339333] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [175.339389] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [175.339446] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [175.339504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [175.339572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [175.339632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [175.339692] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [175.339750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [175.339809] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [175.339864] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [175.339920] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [175.339975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [175.340029] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [175.340086] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [175.340140] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [175.340194] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [175.340247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [175.340300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [175.340356] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [175.340413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [175.340472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [175.340532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [175.340602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [175.340671] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [175.340754] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [175.340824] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [175.340902] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [175.340991] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [175.341070] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [175.341143] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [175.341221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [175.341286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [175.341348] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [175.341409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [175.341470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [175.341529] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [175.341603] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [175.341668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [175.341733] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [175.341788] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [175.341841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [175.341901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [175.341975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [175.342052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [175.342128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [175.342198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [175.342264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [175.342332] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [175.342401] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [175.342469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [175.342537] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [175.342616] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [175.342671] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [175.342728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [175.342783] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [175.342841] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [175.342894] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [175.342948] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [175.343003] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [175.343091] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [175.343179] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [175.343281] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [175.343398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [175.343485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [175.343574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [175.343663] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [175.345134] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [175.347401] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [175.347486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [175.347561] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [175.347621] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [175.347685] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [175.347740] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [175.347795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [175.347849] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [175.347901] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [175.347950] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [175.347998] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [175.348047] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [175.348099] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [175.348151] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [175.348203] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [175.348293] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [175.359703] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [175.360405] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [175.360479] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [175.360536] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [175.360608] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [175.360666] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [175.360724] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [175.883645] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [175.883650] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [175.883651] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [175.883806] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [175.883896] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [175.883979] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [175.884053] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [175.884167] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [175.884270] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [175.884424] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [175.884491] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [175.884594] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [175.884672] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [175.885521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [175.885602] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [175.885673] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [175.885741] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [175.885810] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [175.885878] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [175.885942] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [175.886011] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [175.886074] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [175.886136] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [175.886199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [175.886259] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [175.886319] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [175.886378] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [175.886436] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [175.886494] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [175.886559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [175.886628] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [175.886692] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [175.886752] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [175.886808] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [175.886864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [175.886920] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [175.886978] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [175.887036] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [175.887093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [175.887158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [175.887221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [175.887284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [175.887346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [175.887407] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [175.887467] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [175.887529] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [175.887608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [175.887687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [175.887755] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [175.887816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [175.887883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [175.887948] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [175.888012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [175.888338] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [175.888438] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [175.888524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [175.888611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [175.888783] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [175.888857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [175.888923] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [175.888985] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [175.889129] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [175.889192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [175.889254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [175.889314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [175.889375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [175.889433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [175.889492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [175.889806] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [175.889906] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [175.889961] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [175.890013] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [175.890064] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [175.890115] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [175.890164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [175.890214] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [175.890262] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [175.890309] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [175.890357] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [175.890404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [175.890451] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [175.890498] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [175.890550] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [175.890615] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [175.890700] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [175.891104] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [175.893529] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [175.911092] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [175.922328] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [175.922685] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [175.923606] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [175.923693] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [175.923748] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [175.923798] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [175.923850] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [175.923901] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [175.923951] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [175.924003] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [175.924057] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [175.926032] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [175.926119] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [175.926182] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [175.928218] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [175.928311] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [175.930624] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [175.934143] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [175.934258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [175.934344] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [175.934425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [175.934503] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [175.934609] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [175.934685] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [175.934761] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [175.934835] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [175.934917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [175.935003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [175.935087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [175.935160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [175.935229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [175.935793] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [175.937620] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [175.938590] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [175.938705] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [175.938851] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [175.959696] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [175.960364] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [175.960782] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [175.961079] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [175.961354] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [175.961711] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [175.961985] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [175.962227] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [175.962233] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [175.962237] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [175.962240] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [175.962244] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [175.962248] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [175.962252] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [175.962255] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [175.962259] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [175.962263] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [175.962727] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [175.963077] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [175.963473] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [175.963886] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [175.964223] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [175.964518] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [175.964877] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [175.965173] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [175.965438] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [175.965738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [175.966286] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [175.966523] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [175.966824] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [175.967109] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [175.967366] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [175.967611] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [175.967831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [175.968047] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [175.968253] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [175.968452] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [175.968768] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [175.970436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [175.970608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [175.970764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [175.970910] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [175.971049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [175.971191] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [175.971325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [175.971469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [175.971622] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [175.971749] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [175.971881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [175.972004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [175.972140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [175.972280] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [175.972393] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [175.972520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [175.972682] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [175.972787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [175.972892] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [175.972991] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [175.973091] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [175.973189] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [175.973284] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [175.973381] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [175.973478] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [175.973591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [175.973685] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [175.973775] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [175.973864] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [175.973964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [175.974066] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [175.974164] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [175.974257] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [175.974347] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [175.974450] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [175.974560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [175.974665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [175.974753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [175.974839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [175.974924] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [175.975480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [175.975574] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [175.975656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [175.975736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [175.975813] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [175.975888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [175.975960] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [175.976031] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [175.976100] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [175.976169] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [175.976237] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [175.976304] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [175.976744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [175.976813] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [175.976884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [175.977632] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [175.977769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [175.977834] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [175.977893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [175.977948] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [175.978003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [175.978058] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [175.978111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [175.978164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [175.978216] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [175.978267] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [175.978318] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [175.978370] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [175.978421] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [175.978473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [175.978564] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [175.978654] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [175.980675] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [176.000009] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [176.021342] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [176.021850] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [176.023474] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [176.023765] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [176.027893] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [176.028155] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [176.031880] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [176.032149] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [176.075686] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [176.077004] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [176.077429] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [176.077872] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [176.078258] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [176.078777] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [176.079071] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [176.079352] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [176.082129] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [176.082609] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [176.083011] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [176.083464] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [176.083909] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [176.084350] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [176.084827] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [176.085231] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [176.085618] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [176.086041] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [176.086456] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [176.086872] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [176.087216] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [176.087571] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [176.087899] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [176.088649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [176.089008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [176.089400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [176.089775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [176.090090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [176.090566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [176.090883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [176.091158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [176.091526] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [176.091862] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [176.092132] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [176.092374] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [176.102883] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [176.104435] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [176.104708] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [176.105350] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [176.106290] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [176.106340] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [176.107010] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [176.108082] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [176.108124] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [176.108552] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [176.109140] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [176.109173] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [176.109568] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [176.110090] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [176.110118] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [176.110124] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [176.119887] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [176.123089] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 <7> [176.123952] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [176.124103] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [176.124475] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [176.126589] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [176.126762] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [176.126882] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.126963] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [176.127092] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [176.127192] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.127287] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [176.127394] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [176.127469] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [176.127552] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [176.128017] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [176.128098] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [176.128165] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [176.128227] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [176.128385] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [176.128430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [176.128434] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [176.128854] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [176.129147] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [176.129252] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [176.129355] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [176.129467] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [176.129472] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [176.129474] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.129475] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [176.129477] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [176.129479] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.129481] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [176.129483] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.129485] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [176.129487] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.129500] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [176.129696] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [176.129800] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [176.130473] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [176.130484] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [176.130560] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [176.130562] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [176.130564] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.130624] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [176.130628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [176.130632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [176.130636] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [176.130640] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [176.130787] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [176.130791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [176.130795] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [176.130913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [176.130916] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [176.130919] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [176.131020] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [176.131022] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [176.131025] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [176.131026] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [176.131028] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [176.131044] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [176.131055] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [176.131057] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [176.131067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [176.131118] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [176.131123] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [176.137444] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [176.138071] fbcon: xedrmfb (fb0) is primary device <7> [176.138765] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [176.138882] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [176.138970] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [176.139066] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [176.139157] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [176.139247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [176.139331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [176.139410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [176.139488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [176.139599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [176.139701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [176.139800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [176.139897] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [176.139995] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [176.140091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [176.140187] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [176.140282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [176.140361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [176.140440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [176.140524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [176.140658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [176.140753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [176.140847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [176.140926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [176.141002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [176.141085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [176.141182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [176.141279] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [176.141365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [176.141439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [176.141537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [176.141647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [176.141740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [176.141833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [176.141926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [176.142016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [176.142104] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [176.142193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [176.142284] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [176.142375] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [176.142458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [176.142540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [176.142626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [176.142715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [176.142805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [176.142894] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [176.142983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [176.143072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [176.143160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [176.143235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [176.143308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [176.143381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [176.143453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [176.143556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [176.143649] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [176.143742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [176.143834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [176.143915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [176.143992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [176.144068] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [176.144144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [176.144220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [176.144296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [176.144371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [176.144446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [176.144521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [176.144628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [176.144717] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [176.144806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [176.144896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [176.144977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [176.145051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [176.145126] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [176.145248] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [176.145330] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [176.145416] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [176.145498] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [176.145606] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [176.145675] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [176.145743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [176.145817] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [176.145905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [176.145996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [176.146084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [176.146168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [176.146246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [176.146323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [176.146406] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [176.146525] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [176.146669] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [176.146785] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [176.146892] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [176.147010] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [176.147114] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [176.147223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [176.147326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [176.147428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [176.147536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [176.147635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [176.147733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [176.147829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [176.147910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [176.147996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [176.148091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [176.148183] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [176.148276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [176.148367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [176.148453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [176.148551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [176.148642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [176.148733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [176.148824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [176.148910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [176.148985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [176.149065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [176.149156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [176.149247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [176.149339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [176.149430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [176.149521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [176.149647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [176.149750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [176.149846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [176.149934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [176.150021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [176.150109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [176.150197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [176.150286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [176.150374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [176.150462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [176.150561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [176.150654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [176.150747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [176.150838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [176.150930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [176.151009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [176.151086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [176.151162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [176.151237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [176.151313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [176.151388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [176.151462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [176.151536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [176.151621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [176.151710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [176.151800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [176.151879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [176.151953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [176.152028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [176.152101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [176.152175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [176.152249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [176.152324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [176.152399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [176.152474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [176.152557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [176.152645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [176.152732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [176.152819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [176.153048] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [176.153174] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [176.153299] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [176.153388] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [176.153480] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [176.153564] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [176.153645] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [176.153724] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [176.153802] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [176.153872] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [176.153934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [176.153991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [176.154047] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [176.154104] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [176.154163] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [176.154222] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [176.154281] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [176.154353] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [176.154497] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *) <7> [176.154566] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [176.154670] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [176.154764] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [176.155685] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [176.155754] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [176.155847] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [176.165580] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [176.165716] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [176.165843] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [176.186588] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [176.186887] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [176.209460] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [176.372131] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [176.373981] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [176.375185] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [176.376237] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [176.377782] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [176.379064] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [176.380408] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [176.381084] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [176.382878] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [176.383295] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [176.384178] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [176.384772] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [176.385239] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [176.385796] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [176.401587] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [176.403386] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [176.403959] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [176.406222] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [176.408895] Console: switching to colour frame buffer device 180x56 <6> [176.458415] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [176.458442] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [176.459210] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [176.459851] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [176.460462] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [176.461067] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [176.461628] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [176.462132] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [176.462601] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [176.462980] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [176.463358] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [176.463739] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [176.464122] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [176.464473] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [176.464851] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [176.465177] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [176.465497] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [176.465874] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [176.466186] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [176.466512] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [176.466852] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [176.467115] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [176.467373] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [176.468742] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [176.468954] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [176.469205] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [176.469449] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [176.469722] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [176.469947] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [176.470150] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [176.470350] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [176.470544] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [176.473955] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [176.484813] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [176.484834] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [176.484961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [176.484977] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [176.485708] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [176.486244] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [176.486565] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [176.487000] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [176.487663] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [176.487678] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [176.487684] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.487688] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [176.487696] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [176.487702] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.487708] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [176.487715] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.487719] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [176.487726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.487767] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [176.488079] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [176.488358] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [176.489260] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [176.489267] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [176.489272] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [176.489468] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [176.489481] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [176.489494] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [176.489508] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [176.489542] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [176.490060] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [176.490078] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [176.490091] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [176.490621] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [176.490631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [176.490638] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [176.490967] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [176.490976] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [176.490984] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [176.490991] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [176.490998] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [176.491049] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [176.491078] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [176.491086] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [176.491124] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [176.493337] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [176.493718] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [176.501834] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [176.536635] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [176.537886] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [176.538964] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<6> [158.433684] Console: switching to colour dummy device 80x25

<7> [158.445835] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [158.445976] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [158.450779] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [158.451422] [IGT] xe_configfs: starting subtest ctx-restore-post-bb

<7> [158.451799] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [158.452200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [158.452366] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [158.452512] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [158.452640] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [158.454137] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [158.454195] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [158.454295] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [158.454379] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.454455] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.454514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.454592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [158.454680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [158.454767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [158.454852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [158.454935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [158.455018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [158.455700] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [158.484302] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [158.488688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [158.488974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [158.489270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [158.489518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [158.489773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [158.490025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [158.490312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [158.490556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [158.490802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [158.491050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [158.491334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [158.491580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [158.491959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [158.492254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [158.492496] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [158.492734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [158.492965] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [158.493199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [158.493419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [158.493648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [158.493921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [158.494160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [158.494403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [158.494654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [158.494858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [158.495098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [158.495334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [158.495546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [158.495753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [158.495950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [158.496155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [158.496337] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [158.496518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [158.496694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [158.496894] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [158.497077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [158.497263] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [158.497449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [158.497628] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [158.497786] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [158.498063] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [158.498237] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [158.498425] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [158.498587] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [158.498762] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [158.498926] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [158.499081] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [158.499359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [158.499520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [158.499668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [158.499812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [158.499949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [158.500079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [158.500297] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [158.500928] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [158.501057] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [158.710394] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [158.711989] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [158.717714] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [158.718097] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [158.718531] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [158.770538] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [158.770970] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [158.779665] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [158.781051] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [158.781189] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [158.782482] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [158.782961] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [158.783835] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [158.784189] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [158.784549] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [158.784920] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [158.785241] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [158.785530] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [158.785817] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [158.786155] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [158.786446] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [158.786714] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [158.786979] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [158.787275] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [158.787548] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [158.787817] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [158.788351] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [158.788631] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [158.788913] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [158.789472] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [158.789959] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [158.790423] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [158.790776] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [158.791188] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [158.807667] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [158.808008] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [158.808310] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [158.808744] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [158.829248] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [158.831106] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [158.836016] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [158.841200] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [158.887080] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [158.887723] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [158.969259] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [158.971063] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [159.039218] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (241 ms remaining)

<7> [159.286469] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [159.326172] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [159.360969] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [159.429657] xe 0000:00:02.0: Found custom settings in configfs

<6> [159.429731] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [159.431467] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [159.431476] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [159.431575] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [159.431648] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [159.432664] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [159.432793] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [159.432871] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [159.432957] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [159.433039] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [159.433096] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [159.433187] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [159.433258] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [159.433325] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [159.433405] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [159.433465] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [159.433537] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [159.433608] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [159.433678] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [159.433752] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [159.433838] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [159.433923] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [159.434006] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [159.434086] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [159.434189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [159.434292] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [159.434395] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [159.434480] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [159.434556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [159.434632] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [159.434706] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [159.434780] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [159.434852] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [159.434925] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [159.434996] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [159.435067] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [159.435160] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [159.435267] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [159.435364] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [159.435445] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [159.435514] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [159.435584] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [159.435652] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [159.435721] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [159.435794] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [159.435872] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [159.435950] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [159.436031] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [159.436365] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [159.436469] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [159.436558] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [159.436641] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [159.436714] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [159.436789] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [159.436865] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [159.436939] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [159.437010] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [159.437092] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [159.437200] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [159.437295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [159.437389] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [159.437471] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [159.437543] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [159.437611] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [159.437680] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [159.437748] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [159.437821] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [159.437891] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [159.437966] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [159.438046] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [159.438125] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.438214] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [159.438302] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [159.438389] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [159.438475] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [159.438565] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [159.438663] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [159.438916] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [159.438995] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [159.439112] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [159.439563] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [159.439707] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [159.439801] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [159.439878] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [159.439956] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [159.440060] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [159.440182] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [159.440313] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [159.440450] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [159.440564] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [159.440677] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [159.441253] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [159.441756] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [159.441841] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [159.441919] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [159.441997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [159.442073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [159.442421] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [159.443271] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [159.443400] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [159.443467] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [159.443523] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [159.443580] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [159.443635] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [159.443688] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [159.443741] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [159.443792] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [159.443843] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [159.443892] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [159.443944] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [159.444000] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [159.444055] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [159.444131] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [159.444230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [159.444326] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [159.444421] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [159.444498] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [159.444570] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [159.444642] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [159.444713] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [159.444788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [159.444859] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [159.444930] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [159.445001] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [159.445074] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [159.445220] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [159.445321] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [159.445414] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [159.445495] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [159.445574] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [159.445664] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [159.445749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [159.445824] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [159.445898] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [159.445965] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [159.446031] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [159.452401] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [159.457244] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [159.457208] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [159.457344] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [159.457467] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [159.457606] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [159.457764] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [159.457912] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [159.458038] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [159.458164] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [159.458286] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [159.458396] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [159.458503] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [159.458610] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [159.458715] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [159.458820] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [159.458930] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [159.459035] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [159.459131] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [159.459215] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [159.459295] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [159.459374] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [159.459482] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [159.459607] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [159.460957] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [159.461032] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [159.461127] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [159.471136] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [159.471257] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [159.471336] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [159.716172] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [159.728165] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [159.752150] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [159.788129] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [159.800117] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [159.860139] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [160.208110] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [160.208132] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [160.208134] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [160.208136] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [160.208138] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [160.208140] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [160.208142] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [160.208147] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [160.208148] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [160.208149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [160.208204] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [160.208206] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [160.208207] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [160.208229] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [160.208362] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [160.220090] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [160.232097] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [160.232190] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [160.232284] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [160.232376] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [160.232468] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [160.232649] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [160.232725] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [160.232798] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [160.232869] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [160.232932] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [160.233029] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [160.233262] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [160.233414] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [160.233533] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [160.234055] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [160.234184] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [160.234283] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [160.234520] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [160.234622] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [160.234709] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [160.235066] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [160.235167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [160.235256] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [160.235321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [160.235384] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [160.235447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [160.235510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [160.235571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [160.235630] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [160.235690] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [160.235749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [160.235806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [160.235863] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [160.235921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [160.235978] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [160.236035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [160.236100] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [160.236157] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [160.236217] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [160.236274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [160.236334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [160.236394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [160.236457] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [160.236513] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [160.236568] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [160.236622] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [160.236676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [160.236732] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [160.236785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [160.236838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [160.236890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [160.236941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [160.236995] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [160.237047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [160.237111] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [160.237167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [160.237225] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [160.237287] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [160.237363] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [160.237433] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [160.237506] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [160.237577] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [160.237648] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [160.237714] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [160.237789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [160.237850] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [160.237907] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [160.237963] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [160.238018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [160.238082] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [160.238137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [160.238195] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [160.238259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [160.238336] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [160.238399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [160.238458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [160.238518] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [160.238570] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [160.238621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [160.238672] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [160.238725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [160.238785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [160.238846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [160.238906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [160.238967] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [160.239022] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [160.239078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [160.239129] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [160.239189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [160.239254] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.239313] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.239366] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.239415] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [160.239495] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [160.239574] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [160.239679] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [160.239789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [160.239868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [160.239946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [160.240023] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [160.242323] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [160.244611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [160.244697] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [160.244756] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [160.244811] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [160.244863] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [160.244915] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [160.244967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [160.245017] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [160.245067] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [160.245138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [160.245193] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [160.245255] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [160.245315] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [160.245368] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [160.245417] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [160.245502] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [160.256206] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [160.256918] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [160.257012] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [160.257080] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [160.257134] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [160.257186] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [160.257249] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [160.784246] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [160.784251] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [160.784252] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [160.784463] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [160.784559] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [160.784641] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [160.784726] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [160.784846] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [160.784960] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [160.785097] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [160.785180] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [160.785285] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [160.785381] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [160.786269] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [160.786358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [160.786442] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [160.786524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [160.786597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [160.786668] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [160.786737] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [160.786806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [160.786870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [160.786931] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [160.786994] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [160.787063] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [160.787129] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [160.787200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [160.787268] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [160.787335] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [160.787399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [160.787459] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [160.787519] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [160.787579] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [160.787639] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [160.787698] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [160.787758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [160.787817] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [160.787881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [160.787939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [160.788003] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [160.788072] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [160.788137] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [160.788205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [160.788284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [160.788355] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [160.788420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [160.788484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [160.788545] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [160.788608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [160.788669] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [160.788736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [160.788802] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [160.788866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [160.789040] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [160.789128] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [160.789204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [160.789288] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [160.789456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [160.789527] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [160.789590] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [160.789653] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [160.789790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [160.789848] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [160.789907] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [160.789964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [160.790022] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [160.790089] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [160.790152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [160.790497] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [160.790611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [160.790668] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [160.790721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [160.790771] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [160.790821] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [160.790870] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [160.790919] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [160.790968] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [160.791016] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [160.791076] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [160.791128] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [160.791178] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [160.791230] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [160.791284] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [160.791359] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [160.791492] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [160.791906] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [160.794458] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [160.811444] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [160.822638] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [160.823003] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [160.824172] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [160.824274] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [160.824336] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [160.824393] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [160.824450] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [160.824506] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [160.824560] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [160.824617] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [160.824676] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [160.827125] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [160.827215] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [160.827277] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [160.828919] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [160.829014] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [160.831703] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [160.835486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [160.835600] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [160.835692] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [160.835780] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [160.835866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [160.835952] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [160.836038] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [160.836160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [160.836245] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [160.836329] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [160.836411] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [160.836496] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [160.836581] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [160.836665] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [160.837331] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [160.839011] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [160.840313] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [160.840459] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [160.840644] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [160.862359] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [160.863020] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [160.863437] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [160.863703] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [160.864001] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [160.864325] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [160.864562] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [160.864826] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [160.864833] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [160.864839] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [160.864844] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [160.864849] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [160.864854] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [160.864859] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [160.864863] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [160.864869] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [160.864873] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [160.865359] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [160.865707] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [160.866082] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [160.866432] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [160.866780] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [160.867129] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [160.867520] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [160.867860] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [160.868217] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [160.868511] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [160.869287] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [160.869546] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [160.869850] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [160.870118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [160.870378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [160.870622] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [160.870890] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [160.871128] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [160.871351] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [160.871590] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [160.871906] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [160.873679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [160.873839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [160.874002] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [160.874181] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [160.874352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [160.874500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [160.874642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [160.874785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [160.874914] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [160.875047] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [160.875208] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [160.875339] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [160.875464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [160.875587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [160.875709] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [160.875823] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [160.875938] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [160.876052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [160.876160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [160.876282] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [160.876387] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [160.876488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [160.876589] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [160.876685] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [160.876782] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [160.876881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [160.876977] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [160.877084] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [160.877178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [160.877282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [160.877386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [160.877490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [160.877588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [160.877680] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [160.877772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [160.877870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [160.877974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [160.878088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [160.878173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [160.878258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [160.878855] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [160.878952] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [160.879041] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [160.879150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [160.879232] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [160.879313] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [160.879390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [160.879467] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [160.879542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [160.879616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [160.879688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [160.879760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [160.880235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [160.880307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [160.880377] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [160.881107] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [160.881233] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [160.881295] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [160.881350] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [160.881403] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [160.881454] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [160.881504] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [160.881553] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [160.881602] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [160.881651] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [160.881699] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [160.881746] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [160.881793] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [160.881838] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [160.881884] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [160.881961] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [160.882057] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [160.883909] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [160.907506] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [160.929035] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [160.929664] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [160.931953] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [160.932255] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [160.935954] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [160.936203] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [160.940092] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [160.940320] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [160.985218] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [160.986412] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [160.986799] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [160.987175] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [160.987545] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [160.988425] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [160.988738] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [160.989021] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [160.991301] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [160.991680] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [160.992065] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [160.992494] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [160.992939] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [160.993422] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [160.993813] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [160.994222] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [160.994588] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [160.994907] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [160.995247] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [160.995550] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [160.995846] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [160.996173] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [160.996469] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [160.997198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [160.997554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [160.997924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [160.998313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [160.998619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [160.999027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [160.999365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [160.999635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [161.000018] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [161.000586] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [161.000896] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [161.001166] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [161.013653] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [161.015804] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [161.016023] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [161.016683] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [161.018075] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [161.018223] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [161.018792] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [161.019432] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [161.019475] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [161.019942] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [161.020558] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [161.020590] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [161.020942] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [161.021519] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [161.021545] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [161.021551] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [161.031468] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [161.034618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10

<7> [161.035607] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [161.035721] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [161.037200] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [161.038564] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [161.038728] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [161.038850] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [161.038955] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [161.039084] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [161.039186] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [161.039283] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [161.039412] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [161.039507] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [161.039585] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [161.039914] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [161.040012] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [161.040200] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [161.040277] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [161.040524] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [161.040782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [161.040791] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [161.041444] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [161.041755] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [161.041874] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [161.041986] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [161.042201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [161.042208] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [161.042210] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.042211] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [161.042214] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [161.042216] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.042218] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [161.042223] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.042225] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [161.042227] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.042256] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [161.042360] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [161.042463] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [161.042966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [161.043271] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [161.043345] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [161.043347] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [161.043349] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.043405] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [161.043412] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [161.043416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [161.043421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [161.043426] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [161.043581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [161.043585] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [161.043588] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [161.043704] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [161.043707] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [161.043710] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [161.043837] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [161.043841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [161.043844] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [161.043847] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [161.043849] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [161.043950] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [161.043970] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [161.043974] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [161.043989] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [161.044146] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [161.044159] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [161.051369] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [161.052054] fbcon: xedrmfb (fb0) is primary device

<7> [161.053030] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [161.053227] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [161.053345] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [161.053469] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [161.053574] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [161.053689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [161.053823] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [161.053954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [161.054101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [161.054230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [161.054359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [161.054485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [161.054629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [161.054807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [161.054982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [161.055178] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [161.055352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [161.055552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [161.055724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [161.055897] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [161.056099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [161.056280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [161.056461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [161.056678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [161.056877] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [161.057120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [161.057312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [161.057489] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [161.057695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [161.057882] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [161.058074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [161.058256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [161.058462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [161.058634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [161.058788] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [161.058944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [161.059150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [161.059309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [161.059467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [161.059625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [161.059752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [161.059867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [161.059985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [161.060119] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [161.060236] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [161.060354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [161.060470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [161.060597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [161.060775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [161.060983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [161.061211] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [161.061402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [161.061598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [161.061769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [161.061914] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [161.062066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [161.062208] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [161.062347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [161.062483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [161.062620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [161.062808] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [161.063051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [161.063242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [161.063431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [161.063620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [161.063735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [161.063850] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [161.063964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [161.064091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [161.064206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [161.064318] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [161.064430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [161.064544] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [161.064768] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [161.064910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [161.065056] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [161.065187] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [161.065310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [161.065419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [161.065526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [161.065647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [161.065828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [161.066055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [161.066265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [161.066470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [161.066676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [161.066878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [161.067206] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [161.067448] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [161.067687] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [161.067899] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [161.068146] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [161.068376] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [161.068563] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [161.068766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [161.068985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [161.069236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [161.069467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [161.069709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [161.069918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [161.070151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [161.070367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [161.070609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [161.070809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [161.071008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [161.071239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [161.071437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [161.071634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [161.071841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [161.072058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [161.072254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [161.072450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [161.072641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [161.072832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [161.073022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [161.073283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [161.073497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [161.073689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [161.073878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [161.074081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [161.074270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [161.074459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [161.074645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [161.074831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [161.075017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [161.075234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [161.075432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [161.075613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [161.075795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [161.075979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [161.076215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [161.076396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [161.076576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [161.076756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [161.076936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [161.077146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [161.077326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [161.077504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [161.077647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [161.077765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [161.077884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [161.078003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [161.078138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [161.078271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [161.078402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [161.078520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [161.078672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [161.078857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [161.079053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [161.079241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [161.079428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [161.079614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [161.079789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [161.079962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [161.080160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [161.080331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [161.080520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [161.080674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [161.080743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [161.081151] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [161.081748] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [161.081851] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [161.081933] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [161.082026] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [161.082125] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [161.082211] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [161.082292] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [161.082372] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [161.082444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [161.082521] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [161.082597] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [161.082671] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [161.082733] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [161.082788] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [161.082844] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [161.082900] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [161.082986] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [161.083164] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [161.083236] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [161.083351] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [161.083432] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [161.084417] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [161.084500] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [161.084589] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<6> [161.091783] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [161.091966] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [161.094169] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [161.094288] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [161.094402] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [161.114209] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [161.302863] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [161.306123] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [161.307817] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [161.308895] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [161.310430] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [161.311824] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [161.313608] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [161.314261] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [161.315994] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [161.316490] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [161.317383] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [161.317949] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [161.318406] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [161.318813] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [161.334831] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [161.337304] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [161.337795] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [161.339336] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [161.342726] Console: switching to colour frame buffer device 180x56

<6> [161.390548] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [161.390624] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [161.391201] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [161.391700] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [161.392219] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [161.392664] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [161.393140] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [161.393542] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [161.393892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [161.394270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [161.394669] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [161.395005] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [161.395393] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [161.395723] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [161.396059] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [161.396385] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [161.396709] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [161.397042] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [161.397364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [161.397686] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [161.398007] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [161.398365] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [161.398707] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [161.400102] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [161.400333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [161.400626] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [161.400918] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [161.401202] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [161.401492] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [161.401522] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [161.401612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [161.401627] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [161.402077] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [161.402349] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [161.402628] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [161.403892] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [161.404516] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [161.405114] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [161.405563] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [161.406012] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [161.406611] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [161.406630] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [161.406638] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.406643] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [161.406653] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [161.406661] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.406667] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [161.406676] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.406682] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [161.406691] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.406738] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [161.407207] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [161.407628] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [161.409492] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [161.409501] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [161.409507] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [161.409722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [161.409738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [161.409753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [161.409769] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [161.409783] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [161.410314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [161.410328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [161.410338] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [161.410804] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [161.410817] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [161.410827] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [161.411353] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [161.411364] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [161.411375] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [161.411383] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [161.411391] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [161.411462] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [161.411508] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [161.411519] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [161.411575] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [161.413180] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [161.413882] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [161.414379] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [161.416422] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [161.417008] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [161.417612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [161.417929] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [161.418218] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [161.419264] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [161.456485] Console: switching to colour dummy device 80x25

<7> [161.468273] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [161.468467] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [161.468934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [161.469435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [161.469803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [161.470368] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [161.470859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [161.471514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [161.472118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [161.472679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [161.473328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [161.473911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [161.475840] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [161.484699] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [161.489938] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [161.490418] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [161.490837] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [161.491335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [161.491752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [161.492180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [161.492537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [161.492979] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [161.493579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [161.493984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [161.494403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [161.494722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [161.495035] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [161.495376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [161.495673] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [161.495945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [161.496246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [161.496495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [161.496820] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [161.497064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [161.497281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [161.497538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [161.497745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [161.497967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [161.498179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [161.498363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [161.498580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [161.498769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [161.498969] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [161.499160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [161.499323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [161.499479] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [161.499635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [161.499786] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [161.499947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [161.500151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [161.500300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [161.500444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [161.500590] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [161.500736] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [161.501130] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [161.501252] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [161.501392] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [161.501534] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [161.501681] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [161.501810] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [161.501933] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [161.502112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [161.502246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [161.502359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [161.502472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [161.502585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [161.502696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [161.502801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [161.503317] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [161.503426] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [161.523441] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [161.710302] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [161.710891] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [161.721599] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [161.722130] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [161.721995] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [161.722645] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [161.723049] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [161.774505] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [161.775303] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [161.782154] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [161.782831] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [161.782878] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [161.783774] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [161.784550] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [161.785203] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [161.786979] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [161.787542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [161.788048] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [161.788495] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [161.789002] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [161.789573] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [161.790090] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [161.790616] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [161.791119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [161.791545] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [161.791934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [161.792387] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [161.792786] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [161.793212] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [161.793729] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [161.794122] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [161.794451] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [161.795120] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [161.795592] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [161.796052] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [161.796340] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [161.796728] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [161.811554] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [161.811900] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [161.812164] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [161.812454] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [161.825043] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [161.831635] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [161.838716] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [161.844910] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [161.878118] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [161.879012] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [161.950535] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [161.952846] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [161.997197] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (286 ms remaining)

<7> [162.286133] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [162.337234] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [162.338305] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [162.345349] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [162.350795] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [162.372247] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [162.423811] xe 0000:00:02.0: Found custom settings in configfs

<6> [162.423856] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [162.426199] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [162.426210] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [162.426322] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [162.426400] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [162.427338] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [162.427449] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [162.427526] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [162.427614] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [162.427697] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [162.427764] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [162.427831] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [162.427895] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [162.427959] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [162.428053] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [162.428132] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [162.428232] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [162.428329] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [162.428405] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [162.428483] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [162.428571] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [162.428657] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [162.428740] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [162.428818] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [162.428896] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [162.428972] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [162.429082] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [162.429181] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [162.429288] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [162.429374] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [162.429449] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [162.429522] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [162.429595] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [162.429668] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [162.429740] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [162.429812] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [162.429884] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [162.429956] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [162.430051] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [162.430148] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [162.430246] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [162.430330] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [162.430403] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [162.430474] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [162.430545] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [162.430616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [162.430687] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [162.430762] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [162.431522] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [162.431632] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [162.431728] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [162.431821] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [162.431919] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [162.432025] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [162.432140] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [162.432249] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [162.432340] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [162.432430] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [162.432514] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [162.432594] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [162.432673] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [162.432751] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [162.432831] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [162.432906] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [162.432984] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [162.433072] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [162.433172] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [162.433272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [162.433357] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [162.433443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [162.433527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [162.433607] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [162.433680] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [162.433752] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [162.433831] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [162.433927] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [162.434045] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [162.434252] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [162.434342] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [162.434460] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [162.434552] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [162.434695] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [162.434788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [162.434865] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [162.434942] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [162.435065] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [162.435202] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [162.435331] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [162.435445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [162.435559] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [162.435664] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [162.436114] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [162.436850] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [162.436943] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [162.437045] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [162.437148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [162.437247] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [162.437339] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [162.437355] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [162.437425] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [162.437491] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [162.437500] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [162.437564] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [162.437573] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [162.437629] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [162.437646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [162.437691] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [162.437717] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [162.437751] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [162.437788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [162.437809] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [162.437859] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [162.437867] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [162.437922] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [162.437929] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [162.437978] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [162.438014] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [162.438059] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [162.438106] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [162.438129] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [162.438198] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [162.438200] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [162.438266] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [162.438290] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [162.438370] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [162.438440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [162.438511] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [162.438583] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [162.438658] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [162.438731] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [162.438808] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [162.438883] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [162.438968] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [162.439130] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [162.439232] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [162.439335] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [162.448300] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [162.453138] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [162.454206] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [162.454350] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [162.454468] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [162.454603] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [162.454735] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [162.454868] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [162.455003] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [162.455120] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [162.455231] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [162.455336] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [162.455421] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [162.455507] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [162.455592] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [162.455675] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [162.455760] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [162.455849] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [162.455917] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [162.456205] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [162.456285] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [162.456362] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [162.456468] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [162.456697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [162.458038] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [162.458133] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [162.458241] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [162.468036] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [162.468278] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [162.468487] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [162.707052] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [162.719056] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [162.743024] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [162.779006] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [162.790998] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [162.851007] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [163.198994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [163.199007] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [163.199009] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [163.199010] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [163.199013] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [163.199015] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [163.199016] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [163.199019] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [163.199020] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [163.199022] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [163.199067] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [163.199068] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [163.199070] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [163.199092] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [163.199181] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [163.210970] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [163.222977] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [163.223075] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [163.223164] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [163.223251] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [163.223342] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [163.223519] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [163.223596] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [163.223668] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [163.223731] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [163.223792] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [163.223885] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [163.224094] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [163.224216] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [163.224323] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [163.224737] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [163.224844] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [163.224940] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [163.225230] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [163.225347] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [163.225442] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [163.225754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [163.225842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [163.225928] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [163.226005] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [163.226072] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [163.226141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [163.226220] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [163.226285] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [163.226347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [163.226409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [163.226471] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [163.226531] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [163.226591] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [163.226654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [163.226717] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [163.226780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [163.226841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [163.226902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [163.226968] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [163.227029] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [163.227090] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [163.227168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [163.227237] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [163.227297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [163.227355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [163.227411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [163.227468] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [163.227533] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [163.227595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [163.227657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [163.227720] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [163.227782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [163.227846] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [163.227905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [163.227975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [163.228031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [163.228086] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [163.228150] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [163.228221] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [163.228291] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [163.228365] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [163.228440] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [163.228515] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [163.228585] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [163.228658] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [163.228722] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [163.228784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [163.228844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [163.228901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [163.228960] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [163.229014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [163.229078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [163.229141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [163.229196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [163.229251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [163.229307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [163.229362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [163.229416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [163.229470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [163.229523] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [163.229579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [163.229639] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [163.229698] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [163.229757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [163.229815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [163.229869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [163.229919] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [163.229979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [163.230032] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [163.230094] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [163.230148] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [163.230201] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [163.230254] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [163.230335] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [163.230415] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [163.230510] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [163.230618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [163.230697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [163.230775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [163.230854] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [163.232292] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [163.234547] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [163.234632] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [163.234690] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [163.234743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [163.234795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [163.234846] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [163.234896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [163.234945] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [163.235023] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [163.235078] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [163.235140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [163.235200] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [163.235252] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [163.235301] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [163.235350] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [163.235433] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [163.246111] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [163.246782] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [163.246861] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [163.246917] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [163.246986] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [163.247042] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [163.247104] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [163.765510] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [163.765515] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [163.765517] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [163.765658] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [163.765751] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [163.765839] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [163.765911] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [163.766038] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [163.766149] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [163.766291] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [163.766360] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [163.766429] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [163.766498] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [163.767331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [163.767400] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [163.767469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [163.767534] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [163.767597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [163.767661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [163.767724] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [163.767791] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [163.767854] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [163.767916] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [163.767992] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [163.768055] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [163.768119] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [163.768180] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [163.768239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [163.768298] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [163.768355] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [163.768412] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [163.768469] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [163.768525] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [163.768582] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [163.768638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [163.768694] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [163.768751] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [163.768809] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [163.768866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [163.768933] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [163.768997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [163.769069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [163.769148] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [163.769210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [163.769271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [163.769334] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [163.769397] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [163.769459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [163.769521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [163.769585] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [163.769652] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [163.769718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [163.769782] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [163.769961] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [163.770034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [163.770125] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [163.770191] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [163.770331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [163.770391] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [163.770449] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [163.770506] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [163.770640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [163.770698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [163.770757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [163.770816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [163.770877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [163.770938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [163.770997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [163.771330] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [163.771432] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [163.771490] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [163.771544] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [163.771594] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [163.771644] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [163.771694] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [163.771743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [163.771792] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [163.771840] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [163.771887] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [163.771942] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [163.771989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [163.772045] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [163.772113] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [163.772191] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [163.772271] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [163.772662] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [163.775318] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [163.792496] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [163.803680] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [163.804010] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [163.804924] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [163.805047] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [163.805118] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [163.805178] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [163.805240] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [163.805300] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [163.805359] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [163.805418] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [163.805481] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [163.807658] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [163.807754] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [163.807832] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [163.809337] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [163.809433] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [163.811624] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [163.814995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [163.815095] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [163.815168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [163.815235] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [163.815293] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [163.815349] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [163.815404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [163.815459] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [163.815513] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [163.815567] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [163.815622] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [163.815673] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [163.815723] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [163.815773] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [163.816214] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [163.817337] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [163.818078] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [163.818153] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [163.818241] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [163.839080] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [163.839619] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [163.839857] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [163.840100] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [163.840280] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [163.840448] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [163.840604] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [163.840796] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [163.840801] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [163.840804] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [163.840807] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [163.840810] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [163.840813] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [163.840817] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [163.840820] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [163.840823] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [163.840826] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [163.841170] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [163.841395] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [163.841620] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [163.841880] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [163.842143] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [163.842376] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [163.842580] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [163.842828] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [163.843061] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [163.843249] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [163.843632] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [163.843795] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [163.843976] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [163.844171] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [163.844357] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [163.844527] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [163.844685] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [163.844837] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [163.845001] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [163.845152] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [163.845366] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [163.846683] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [163.846807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [163.846936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [163.847053] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [163.847167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [163.847279] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [163.847387] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [163.847499] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [163.847605] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [163.847712] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [163.847822] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [163.847924] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [163.848053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [163.848152] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [163.848259] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [163.848369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [163.848473] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [163.848565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [163.848655] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [163.848753] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [163.848850] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [163.848942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [163.849026] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [163.849109] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [163.849192] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [163.849275] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [163.849354] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [163.849434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [163.849512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [163.849600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [163.849688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [163.849772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [163.849853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [163.849938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [163.850015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [163.850092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [163.850167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [163.850241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [163.850314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [163.850393] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [163.850945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [163.851025] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [163.851106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [163.851182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [163.851254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [163.851325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [163.851394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [163.851463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [163.851531] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [163.851598] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [163.851663] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [163.851727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [163.852174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [163.852241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [163.852305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [163.853031] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [163.853159] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [163.853220] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [163.853275] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [163.853328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [163.853381] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [163.853431] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [163.853481] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [163.853531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [163.853579] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [163.853628] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [163.853677] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [163.853725] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [163.853771] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [163.853819] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [163.853890] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [163.854435] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [163.856088] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [163.875823] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [163.897213] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [163.897790] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [163.900041] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [163.900298] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [163.904289] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [163.904512] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [163.908542] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [163.908772] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [163.953121] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [163.954587] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [163.955037] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [163.955423] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [163.955858] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [163.956483] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [163.956808] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [163.957215] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [163.958188] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [163.958602] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [163.959012] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [163.959432] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [163.959813] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [163.960270] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [163.960650] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [163.961087] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [163.961448] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [163.961802] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [163.962183] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [163.962524] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [163.962861] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [163.963242] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [163.963574] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [163.964370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [163.964794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [163.965238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [163.965659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [163.966040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [163.966505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [163.966865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [163.967237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [163.967641] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [163.967961] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [163.968251] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [163.968525] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [163.977112] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [163.978638] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [163.978792] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [163.979160] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [163.980065] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [163.980108] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [163.980533] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [163.981232] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [163.981272] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [163.981681] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [163.982361] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [163.982396] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [163.982803] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [163.983454] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [163.983484] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [163.983490] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [163.995404] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [163.998842] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11

<7> [163.999463] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [163.999587] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [163.999951] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [164.001244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [164.001480] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [164.001653] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [164.001797] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [164.002784] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [164.002899] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [164.003039] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [164.003142] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [164.003414] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [164.003668] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [164.003758] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [164.003826] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [164.003929] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [164.004015] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [164.004259] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [164.004387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [164.004393] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [164.004851] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [164.005291] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [164.005436] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [164.005573] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [164.005726] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [164.005732] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.005735] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.005736] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [164.005739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [164.005743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.005746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [164.005749] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.005752] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [164.005755] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.005774] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [164.005942] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [164.006086] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [164.006603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [164.006620] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [164.006808] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.006811] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.006813] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.006875] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [164.006879] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [164.006884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [164.006888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [164.006892] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [164.007361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [164.007367] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [164.007371] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [164.007531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [164.007535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [164.007538] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [164.007693] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [164.007697] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [164.007701] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [164.007704] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [164.007707] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [164.007731] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [164.007749] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [164.007753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [164.007770] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [164.007835] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [164.007844] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [164.015013] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [164.015456] fbcon: xedrmfb (fb0) is primary device

<7> [164.016345] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [164.016462] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [164.016563] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [164.016664] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [164.016756] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [164.016849] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [164.016950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [164.017058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [164.017164] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [164.017268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [164.017372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [164.017459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [164.017544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [164.017630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [164.017732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [164.017833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [164.017977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [164.018079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [164.018181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [164.018281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [164.018380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [164.018477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [164.018581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [164.018675] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [164.018772] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [164.018873] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [164.018992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [164.019084] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [164.019177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [164.019268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [164.019358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [164.019435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [164.019512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [164.019587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [164.019664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [164.019740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [164.019816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [164.019887] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [164.019973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [164.020065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [164.020154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [164.020242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [164.020332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [164.020422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [164.020514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [164.020602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [164.020682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [164.020760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [164.020838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [164.020915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [164.021022] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [164.021115] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [164.021207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [164.021289] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [164.021365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [164.021437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [164.021514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [164.021604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [164.021693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [164.021783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [164.021858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [164.021938] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [164.022026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [164.022114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [164.022202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [164.022290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [164.022367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [164.022434] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [164.022501] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [164.022568] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [164.022639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [164.022711] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [164.022785] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [164.022907] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [164.023023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [164.023100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [164.023171] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [164.023241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [164.023311] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [164.023378] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [164.023437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [164.023513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [164.023616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [164.023711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [164.023801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [164.023902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [164.024021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [164.024121] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [164.024243] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [164.024351] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [164.024449] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [164.024547] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [164.024646] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [164.024717] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [164.024793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [164.024873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [164.025020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [164.025122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [164.025220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [164.025316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [164.025396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [164.025492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [164.025589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [164.025684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [164.025769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [164.025847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [164.025942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [164.026036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [164.026130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [164.026224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [164.026319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [164.026412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [164.026504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [164.026598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [164.026692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [164.026784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [164.026878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [164.026983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [164.027076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [164.027171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [164.027267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [164.027365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [164.027462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [164.027563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [164.027656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [164.027752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [164.027868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [164.027973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [164.028068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [164.028162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [164.028247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [164.028325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [164.028403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [164.028480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [164.028557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [164.028630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [164.028701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [164.028772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [164.028848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [164.028928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [164.029017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [164.029107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [164.029197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [164.029278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [164.029353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [164.029429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [164.029503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [164.029577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [164.029655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [164.029733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [164.029811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [164.029883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [164.029984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [164.030079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [164.030173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [164.030266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [164.030357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [164.030447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [164.030538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [164.030897] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [164.031006] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [164.031115] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [164.031203] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [164.031305] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [164.031386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [164.031466] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [164.031546] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [164.031625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [164.031705] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [164.031785] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [164.031863] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [164.031952] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [164.032028] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [164.032102] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [164.032175] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [164.032247] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [164.032332] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [164.032527] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [164.032596] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [164.032694] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [164.032772] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [164.033692] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [164.033761] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [164.033846] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [164.042959] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [164.043056] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [164.043155] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [164.060644] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [164.060910] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [164.083862] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [164.258496] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [164.260804] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [164.262098] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [164.263079] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [164.264332] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [164.265587] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [164.266969] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [164.267480] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [164.269268] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [164.269837] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [164.270943] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [164.271605] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [164.272252] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [164.272843] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [164.288511] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [164.290529] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [164.291067] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [164.292640] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [164.295119] Console: switching to colour frame buffer device 180x56

<6> [164.344847] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [164.344870] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [164.345536] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [164.346072] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [164.346611] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [164.347111] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [164.347583] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [164.348045] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [164.348464] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [164.348847] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [164.349270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [164.349624] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [164.349963] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [164.350341] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [164.350689] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [164.351031] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [164.351353] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [164.351715] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [164.352114] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [164.352466] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [164.352813] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [164.353171] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [164.353521] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [164.358851] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [164.359346] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [164.359824] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [164.360353] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [164.360806] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [164.361282] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [164.361665] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [164.362074] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [164.362442] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [164.368450] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [164.369825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [164.370018] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [164.370205] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [164.370398] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [164.370586] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [164.370766] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [164.370937] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [164.388727] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [164.388777] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [164.390239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [164.390291] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [164.391893] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [164.392873] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [164.393615] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [164.394255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [164.395253] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [164.395274] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.395282] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.395286] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [164.395297] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [164.395305] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.395312] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [164.395338] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.395343] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [164.395352] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.395430] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [164.395923] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [164.396340] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [164.397584] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.397593] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.397600] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.397862] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [164.397895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [164.397942] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [164.397959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [164.397973] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [164.398603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [164.398617] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [164.398630] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [164.399045] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [164.399056] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [164.399066] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [164.399495] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [164.399506] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [164.399516] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [164.399525] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [164.399532] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [164.399801] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [164.399848] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [164.399857] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [164.399949] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [164.406040] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [164.421739] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [164.421757] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [164.422088] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [164.422113] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [164.423049] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [164.423619] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [164.424228] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [164.424823] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [164.425505] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [164.425529] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.425540] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.425547] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [164.425563] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [164.425575] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.425581] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [164.425590] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.425595] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [164.425602] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.425637] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [164.425951] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [164.426230] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [164.427048] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.427055] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [164.427059] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [164.427206] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [164.427216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [164.427225] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [164.427235] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [164.427244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [164.427625] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [164.427635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [164.427643] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [164.428362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [164.428380] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [164.428396] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [164.428966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [164.428978] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [164.428990] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [164.429000] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [164.429010] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [164.429077] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [164.429121] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [164.429135] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [164.429178] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [164.455415] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [164.494799] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<6> [164.519544] Console: switching to colour dummy device 80x25

<7> [164.521986] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [164.522234] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [164.522845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [164.523300] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [164.523738] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [164.524131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [164.524596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [164.525649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [164.526496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [164.527279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [164.527987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [164.528609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [164.530633] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [164.538396] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [164.541309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [164.542018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [164.542659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [164.543242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [164.543783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [164.544804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [164.545443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [164.546004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [164.546502] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [164.547062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [164.547562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [164.548057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [164.548522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [164.549062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [164.549554] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [164.550100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [164.550623] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [164.551102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [164.551608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [164.552108] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [164.552575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [164.553103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [164.553553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [164.553954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [164.554267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [164.554580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [164.554869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [164.555196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [164.555459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [164.555715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [164.556016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [164.556250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [164.556471] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [164.556691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [164.556922] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [164.557141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [164.557347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [164.557551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [164.557742] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [164.557938] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [164.558214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [164.558383] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [164.558589] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [164.558794] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [164.559012] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [164.559218] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [164.559403] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [164.559609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [164.559776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [164.559932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [164.560077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [164.560215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [164.560345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [164.560495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [164.560852] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [164.560993] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [164.766119] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [164.766809] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [164.772361] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [164.772855] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [164.773436] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [164.824743] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [164.825255] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [164.825385] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [164.825890] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [164.826781] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [164.826774] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [164.827332] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [164.827937] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [164.828304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [164.828641] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [164.829027] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [164.829353] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [164.829673] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [164.830018] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [164.830324] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [164.830625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [164.830944] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [164.831276] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [164.831565] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [164.831849] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [164.832203] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [164.832573] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [164.832842] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [164.833177] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [164.833768] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [164.834284] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [164.834713] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [164.835042] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [164.835462] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [164.862256] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [164.862680] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [164.863010] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [164.863375] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [164.867928] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [164.873624] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [164.886678] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [164.894404] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [164.924517] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [164.925301] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [164.998018] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [165.001487] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [165.078217] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (248 ms remaining)

<7> [165.334040] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [165.410043] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [165.411124] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [165.416681] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [165.422294] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [165.454703] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [165.511453] xe 0000:00:02.0: Found custom settings in configfs

<6> [165.511490] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [165.512754] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [165.512766] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [165.512891] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [165.512983] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [165.514235] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [165.514450] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [165.514555] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [165.514665] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [165.514785] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [165.514856] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [165.514940] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [165.515008] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [165.515075] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [165.515163] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [165.515246] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [165.515340] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [165.515434] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [165.515530] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [165.515628] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [165.515750] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [165.515875] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [165.515991] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [165.516102] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [165.516212] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [165.516323] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [165.516438] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [165.516553] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [165.516671] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [165.516790] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [165.516916] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [165.517037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [165.517155] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [165.517273] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [165.517392] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [165.517514] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [165.517639] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [165.517768] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [165.517907] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [165.518037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [165.518169] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [165.518300] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [165.518430] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [165.518559] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [165.518693] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [165.518828] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [165.518972] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [165.519118] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [165.519670] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [165.519876] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [165.520044] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [165.520206] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [165.520356] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [165.520509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [165.520664] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [165.520806] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [165.520938] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [165.521088] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [165.521225] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [165.521362] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [165.521501] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [165.521642] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [165.521782] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [165.521920] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [165.522045] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [165.522166] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [165.522293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [165.522414] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [165.522532] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [165.522650] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [165.522762] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [165.522926] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [165.523046] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [165.523157] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [165.523285] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [165.523427] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [165.523567] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [165.523856] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [165.523980] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [165.524130] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [165.524279] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [165.524457] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [165.524592] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [165.524697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [165.524798] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [165.524934] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [165.525070] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [165.525200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [165.525333] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [165.525467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [165.525602] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [165.526219] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [165.527315] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [165.527440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [165.527536] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [165.527627] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [165.527718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [165.527808] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [165.527940] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [165.528036] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [165.528132] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [165.528224] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [165.528261] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [165.528316] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [165.528418] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [165.528407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [165.528498] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [165.528502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [165.528570] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [165.528590] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [165.528637] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [165.528687] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [165.528704] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [165.528770] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [165.528775] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [165.528835] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [165.528862] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [165.528912] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [165.528962] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [165.528980] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [165.529045] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [165.529050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [165.529112] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [165.529139] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [165.529179] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [165.529227] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [165.529247] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [165.529318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [165.529425] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [165.529522] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [165.529613] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [165.529703] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [165.529792] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [165.529887] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [165.529980] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [165.530071] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [165.540686] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [165.541857] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [165.546487] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [165.546599] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [165.546699] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [165.546813] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [165.547019] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [165.547156] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [165.547283] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [165.547393] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [165.547509] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [165.547634] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [165.547770] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [165.547905] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [165.548034] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [165.548163] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [165.548297] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [165.548422] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [165.548528] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [165.548629] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [165.548708] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [165.548779] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [165.548879] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [165.548985] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [165.549883] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [165.549965] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [165.550069] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [165.559920] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [165.560060] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [165.560164] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [165.801938] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [165.813928] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [165.837951] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [165.873895] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [165.885884] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [165.945894] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [166.293876] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [166.293889] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [166.293892] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [166.293893] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [166.293896] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [166.293899] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [166.293900] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [166.293903] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [166.293904] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [166.293906] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [166.293955] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [166.293956] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [166.293957] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [166.293979] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [166.294070] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [166.305866] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [166.317866] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [166.317966] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [166.318049] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [166.318135] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [166.318223] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [166.318406] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [166.318479] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [166.318547] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [166.318615] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [166.318674] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [166.318764] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [166.318977] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [166.319119] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [166.319235] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [166.319650] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [166.319781] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [166.319906] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [166.320130] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [166.320233] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [166.320324] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [166.320651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [166.320743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [166.320832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [166.320921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [166.320998] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [166.321063] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [166.321125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [166.321185] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [166.321245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [166.321303] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [166.321363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [166.321421] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [166.321482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [166.321543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [166.321607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [166.321673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [166.321738] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [166.321802] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [166.321875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [166.321934] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [166.321996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [166.322058] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [166.322120] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [166.322178] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [166.322236] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [166.322289] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [166.322341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [166.322397] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [166.322451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [166.322507] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [166.322562] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [166.322617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [166.322674] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [166.322727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [166.322781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [166.322844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [166.322901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [166.322962] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [166.323039] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [166.323111] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [166.323184] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [166.323257] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [166.323335] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [166.323409] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [166.323497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [166.323577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [166.323654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [166.323729] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [166.323800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [166.323886] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [166.323940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [166.323996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [166.324054] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [166.324114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [166.324175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [166.324235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [166.324294] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [166.324353] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [166.324411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [166.324468] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [166.324526] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [166.324583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [166.324640] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [166.324697] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [166.324754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [166.324812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [166.324883] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [166.324937] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [166.324999] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [166.325075] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [166.325137] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [166.325199] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [166.325258] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [166.325347] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [166.325436] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [166.325532] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [166.325659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [166.325763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [166.325871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [166.325957] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [166.327380] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [166.329646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [166.329729] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [166.329785] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [166.329845] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [166.329898] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [166.329956] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [166.330022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [166.330082] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [166.330138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [166.330190] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [166.330239] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [166.330288] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [166.330337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [166.330385] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [166.330434] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [166.330521] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [166.341978] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [166.342662] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [166.342743] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [166.342799] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [166.342868] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [166.342919] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [166.342980] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [166.866535] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [166.866539] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [166.866541] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [166.866696] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [166.866785] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [166.866901] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [166.866978] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [166.867116] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [166.867234] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [166.867375] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [166.867450] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [166.867527] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [166.867599] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [166.868490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [166.868561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [166.868631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [166.868697] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [166.868761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [166.868831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [166.868900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [166.868973] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [166.869044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [166.869106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [166.869167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [166.869228] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [166.869288] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [166.869346] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [166.869404] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [166.869462] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [166.869519] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [166.869576] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [166.869631] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [166.869687] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [166.869743] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [166.869799] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [166.869864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [166.869925] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [166.869998] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [166.870061] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [166.870123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [166.870188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [166.870250] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [166.870312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [166.870373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [166.870432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [166.870494] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [166.870556] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [166.870616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [166.870676] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [166.870735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [166.870797] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [166.870868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [166.870936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [166.871130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [166.871198] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [166.871266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [166.871333] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [166.871483] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [166.871548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [166.871607] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [166.871665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [166.871804] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [166.871875] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [166.871936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [166.872009] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [166.872073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [166.872128] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [166.872183] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [166.872478] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [166.872580] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [166.872636] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [166.872688] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [166.872738] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [166.872787] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [166.872847] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [166.872896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [166.872951] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [166.873014] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [166.873064] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [166.873111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [166.873158] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [166.873205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [166.873251] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [166.873317] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [166.873396] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [166.873804] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [166.876159] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [166.893186] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [166.904375] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [166.904757] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [166.905622] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [166.905719] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [166.905785] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [166.905871] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [166.905934] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [166.905995] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [166.906053] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [166.906114] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [166.906177] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [166.908175] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [166.908277] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [166.908346] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [166.909880] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [166.909985] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [166.912672] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [166.916393] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [166.916531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [166.916646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [166.916758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [166.916892] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [166.916999] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [166.917119] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [166.917240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [166.917347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [166.917446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [166.917553] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [166.917650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [166.917748] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [166.917911] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [166.918608] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [166.920614] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [166.921662] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [166.921773] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [166.921929] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [166.942981] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [166.943681] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [166.944090] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [166.944375] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [166.944622] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [166.944955] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [166.945196] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [166.945440] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [166.945446] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [166.945450] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [166.945453] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [166.945458] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [166.945461] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [166.945465] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [166.945469] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [166.945473] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [166.945477] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [166.945907] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [166.946227] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [166.946555] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [166.946884] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [166.947177] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [166.947451] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [166.947737] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [166.948028] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [166.948274] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [166.948548] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [166.949071] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [166.949289] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [166.949509] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [166.949755] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [166.950007] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [166.950208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [166.950407] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [166.950622] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [166.950802] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [166.951025] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [166.951309] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [166.952868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [166.953012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [166.953155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [166.953292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [166.953424] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [166.953559] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [166.953690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [166.953852] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [166.953996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [166.954118] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [166.954260] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [166.954380] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [166.954494] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [166.954608] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [166.954717] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [166.954829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [166.954940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [166.955042] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [166.955143] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [166.955241] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [166.955337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [166.955434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [166.955534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [166.955631] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [166.955723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [166.955819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [166.955910] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [166.955997] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [166.956083] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [166.956178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [166.956272] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [166.956363] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [166.956451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [166.956538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [166.956627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [166.956711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [166.956795] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [166.956903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [166.956996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [166.957086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [166.957644] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [166.957725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [166.957807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [166.957911] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [166.957988] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [166.958062] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [166.958134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [166.958210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [166.958279] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [166.958346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [166.958413] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [166.958480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [166.958917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [166.958991] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [166.959057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [166.959760] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [166.959891] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [166.959957] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [166.960015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [166.960071] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [166.960124] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [166.960177] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [166.960228] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [166.960279] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [166.960328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [166.960377] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [166.960424] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [166.960471] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [166.960518] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [166.960566] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [166.960634] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [166.960722] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [166.962423] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [166.981473] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [167.002766] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [167.003352] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [167.005228] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [167.005491] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [167.009907] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [167.010165] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [167.014030] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [167.014313] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [167.062972] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [167.064207] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [167.064618] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [167.065099] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [167.065476] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [167.065984] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [167.066278] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [167.066621] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [167.067397] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [167.067826] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [167.068239] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [167.068598] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [167.068974] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [167.069318] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [167.069675] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [167.070078] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [167.070477] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [167.070804] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [167.071197] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [167.071528] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [167.071878] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [167.072199] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [167.072511] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [167.073241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [167.073635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [167.074079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [167.074451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [167.074889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [167.075410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [167.075773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [167.076163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [167.076597] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [167.076972] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [167.077300] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [167.077593] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [167.087938] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [167.090127] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [167.090461] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [167.091504] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [167.095514] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [167.095664] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [167.097161] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [167.099681] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [167.099806] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [167.101035] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [167.102987] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [167.103128] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [167.104351] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [167.106296] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [167.106390] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [167.106406] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [167.120422] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [167.123151] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12

<7> [167.123634] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [167.123741] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [167.124447] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [167.126004] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [167.126174] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [167.126293] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [167.126390] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [167.126512] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [167.126606] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [167.126681] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [167.126779] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [167.126874] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [167.126875] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [167.126966] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [167.126972] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [167.127056] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [167.127134] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [167.127335] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [167.127399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [167.127405] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [167.130248] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [167.130585] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [167.130695] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [167.130800] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [167.130951] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [167.130957] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [167.130960] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.130961] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [167.130964] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [167.130967] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.130970] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [167.130972] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.130974] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [167.130977] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.130995] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [167.131116] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [167.131235] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [167.131711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [167.131724] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [167.131796] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [167.131798] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [167.131799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.131865] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [167.131869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [167.131873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [167.131877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [167.131882] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [167.132037] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [167.132040] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [167.132043] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [167.132163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [167.132166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [167.132169] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [167.132296] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [167.132299] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [167.132303] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [167.132305] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [167.132308] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [167.132327] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [167.132339] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [167.132343] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [167.132357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [167.132414] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [167.132420] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [167.138578] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [167.139113] fbcon: xedrmfb (fb0) is primary device

<7> [167.139901] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [167.140043] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [167.140158] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [167.140278] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [167.140390] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [167.140501] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [167.140596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [167.140685] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [167.140782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [167.140930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [167.141033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [167.141134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [167.141234] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [167.141332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [167.141430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [167.141527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [167.141629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [167.141735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [167.141852] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [167.141956] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [167.142061] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [167.142165] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [167.142269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [167.142372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [167.142475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [167.142595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [167.142701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [167.142813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [167.142924] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [167.143034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [167.143142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [167.143250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [167.143371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [167.143495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [167.143612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [167.143721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [167.143837] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [167.143945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [167.144052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [167.144158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [167.144268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [167.144376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [167.144485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [167.144593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [167.144676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [167.144758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [167.144865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [167.144955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [167.145045] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [167.145134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [167.145218] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [167.145305] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [167.145394] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [167.145483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [167.145584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [167.145703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [167.145830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [167.145948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [167.146064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [167.146180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [167.146295] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [167.146409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [167.146523] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [167.146635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [167.146734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [167.146844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [167.146942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [167.147040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [167.147139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [167.147238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [167.147336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [167.147433] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [167.147532] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [167.147683] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [167.147779] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [167.147970] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [167.148052] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [167.148131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [167.148209] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [167.148285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [167.148361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [167.148454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [167.148574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [167.148697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [167.148836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [167.148961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [167.149086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [167.149212] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [167.149358] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [167.149504] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [167.149650] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [167.149774] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [167.149938] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [167.150072] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [167.150212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [167.150337] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [167.150461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [167.150580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [167.150697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [167.150819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [167.150934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [167.151049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [167.151163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [167.151276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [167.151387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [167.151498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [167.151609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [167.151719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [167.151836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [167.151947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [167.152054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [167.152162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [167.152271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [167.152379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [167.152487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [167.152611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [167.152742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [167.152880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [167.152997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [167.153129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [167.153246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [167.153362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [167.153476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [167.153587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [167.153674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [167.153762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [167.153865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [167.153958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [167.154051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [167.154144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [167.154239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [167.154333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [167.154426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [167.154520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [167.154614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [167.154722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [167.154855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [167.154971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [167.155075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [167.155181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [167.155285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [167.155388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [167.155491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [167.155593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [167.155704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [167.155823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [167.155935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [167.156048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [167.156160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [167.156271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [167.156398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [167.156530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [167.156638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [167.156725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [167.156821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [167.156908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [167.156997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [167.157095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [167.157180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [167.157406] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [167.157494] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [167.157608] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [167.157696] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [167.157802] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [167.157907] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [167.157992] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [167.158074] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [167.158153] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [167.158232] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [167.158311] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [167.158388] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [167.158464] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [167.158547] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [167.158628] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [167.158690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [167.158746] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [167.158819] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [167.158976] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [167.159050] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [167.159152] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [167.159228] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [167.160131] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [167.160203] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [167.160282] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [167.169854] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [167.169939] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [167.170039] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [167.173712] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [167.174264] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [167.196708] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [167.381847] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [167.384048] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [167.385396] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [167.388087] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [167.389697] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [167.391073] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [167.392318] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [167.392716] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [167.395909] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [167.396348] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [167.397271] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [167.397906] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [167.398376] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [167.398959] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [167.414692] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [167.416589] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [167.417118] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [167.418627] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [167.421095] Console: switching to colour frame buffer device 180x56

<6> [167.471056] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [167.471080] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [167.471664] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [167.472236] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [167.472728] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [167.473264] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [167.473729] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [167.474298] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [167.474767] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [167.475263] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [167.475697] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [167.476155] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [167.476592] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [167.476994] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [167.477357] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [167.477680] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [167.478079] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [167.478404] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [167.478725] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [167.479078] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [167.479393] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [167.479694] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [167.480011] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [167.481386] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [167.481404] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [167.481521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [167.481416] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [167.481537] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [167.481768] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [167.482218] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [167.482582] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [167.482944] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [167.483259] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [167.483550] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [167.483874] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [167.484139] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [167.484763] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [167.485282] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [167.485555] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [167.486054] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [167.486567] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [167.486584] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [167.486591] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.486594] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [167.486603] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [167.486610] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.486616] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [167.486624] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.486629] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [167.486636] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.486675] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [167.487172] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [167.487616] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [167.488742] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [167.488750] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [167.488755] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [167.488967] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [167.488981] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [167.488995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [167.489009] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [167.489022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [167.489503] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [167.489516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [167.489527] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [167.489998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [167.490012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [167.490022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [167.490465] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [167.490479] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [167.490492] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [167.490503] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [167.490512] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [167.490589] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [167.490636] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [167.490649] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [167.490709] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [167.491421] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [167.492834] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [167.493249] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [167.494108] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [167.494643] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [167.495216] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [167.495758] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [167.496316] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [167.498387] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [167.537452] Console: switching to colour dummy device 80x25

<7> [167.548213] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [167.548375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [167.548874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [167.549265] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [167.549648] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [167.550636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [167.551198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [167.551787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [167.552509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [167.553180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [167.553749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [167.554428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [167.556059] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [167.564698] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [167.567472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [167.567973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [167.568419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [167.568922] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [167.569461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [167.570056] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [167.570587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [167.571109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [167.571633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [167.572227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [167.572714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [167.573325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [167.573790] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [167.574372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [167.574739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [167.575107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [167.575376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [167.575639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [167.575923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [167.576182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [167.576407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [167.576631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [167.576896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [167.577102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [167.577296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [167.577492] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [167.577681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [167.577888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [167.578071] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [167.578249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [167.578448] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [167.578619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [167.578781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [167.578972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [167.579147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [167.579304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [167.579442] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [167.579580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [167.579718] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [167.579880] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [167.580101] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [167.580244] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [167.580408] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [167.580548] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [167.580698] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [167.580847] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [167.580981] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [167.581141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [167.581263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [167.581377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [167.581489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [167.581598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [167.581699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [167.581812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [167.582079] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [167.582195] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [167.609873] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [167.789929] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [167.790480] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [167.801398] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [167.801924] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [167.801800] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [167.802431] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [167.802526] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [167.853753] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [167.854360] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [167.854231] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [167.854514] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [167.855056] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [167.855738] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [167.855975] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [167.856513] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [167.857256] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [167.857722] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [167.858242] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [167.858752] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [167.859306] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [167.859724] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [167.860195] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [167.860589] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [167.861020] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [167.861410] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [167.861907] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [167.862345] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [167.862758] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [167.863228] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [167.863812] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [167.864243] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [167.864683] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [167.865437] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [167.866018] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [167.866519] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [167.866975] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [167.867468] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [167.891259] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [167.891559] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [167.891788] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [167.892028] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [167.900602] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [167.909181] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [167.918490] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [167.926885] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [167.961547] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [167.962566] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [168.048137] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [168.050182] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [168.106905] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (248 ms remaining)

<7> [168.357983] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [168.429509] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [168.431010] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [168.437472] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [168.443117] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [168.465431] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [168.527456] xe 0000:00:02.0: Found custom settings in configfs

<6> [168.527494] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [168.528642] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [168.528652] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [168.528775] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [168.528883] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [168.529703] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [168.529945] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [168.530046] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [168.530137] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [168.530222] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [168.530282] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [168.530340] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [168.530397] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [168.530453] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [168.530516] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [168.530576] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [168.530650] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [168.530724] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [168.530814] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [168.530916] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [168.531029] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [168.531125] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [168.531210] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [168.531289] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [168.531367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [168.531444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [168.531520] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [168.531595] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [168.531669] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [168.531743] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [168.531839] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [168.531935] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [168.532030] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [168.532117] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [168.532188] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [168.532260] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [168.532332] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [168.532402] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [168.532473] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [168.532544] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [168.532615] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [168.532686] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [168.532757] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [168.532864] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [168.532956] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [168.533048] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [168.533123] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [168.533205] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [168.533527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [168.533620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [168.533707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [168.534002] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [168.534114] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [168.534193] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [168.534271] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [168.534344] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [168.534415] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [168.534497] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [168.534573] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [168.534646] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [168.534720] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [168.534810] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [168.534907] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [168.534998] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [168.535089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [168.535161] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [168.535234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [168.535305] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [168.535376] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [168.535447] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [168.535517] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.535586] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [168.535655] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [168.535723] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [168.535816] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [168.535929] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [168.536051] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [168.536306] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [168.536385] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [168.536498] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [168.536615] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [168.536754] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [168.536879] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [168.536977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [168.537073] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [168.537173] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [168.537278] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [168.537380] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [168.537481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [168.537588] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [168.537699] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [168.538138] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [168.538630] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [168.538718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [168.538979] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [168.539077] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [168.539100] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [168.539173] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [168.539248] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [168.539249] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [168.539319] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [168.539384] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [168.539444] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [168.539503] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [168.539559] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [168.539615] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [168.539669] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [168.539724] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [168.539755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [168.539791] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [168.539859] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [168.539864] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [168.539927] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [168.539956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [168.539992] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [168.540047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [168.540127] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [168.540201] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [168.540269] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [168.540340] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [168.540419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [168.540493] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [168.540567] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [168.540640] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [168.540706] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [168.540776] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [168.540862] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [168.540952] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [168.541047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [168.541132] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [168.541207] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [168.541292] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [168.541381] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [168.541472] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [168.541561] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [168.541648] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [168.547613] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<7> [168.552346] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [168.552480] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [168.552601] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [168.552775] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [168.552933] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<6> [168.553064] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [168.553064] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [168.553179] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [168.553290] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [168.553407] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [168.553515] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [168.553622] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [168.553728] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [168.553910] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [168.554021] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [168.554219] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [168.554329] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [168.554403] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [168.554472] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [168.554535] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [168.554595] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [168.554689] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [168.554795] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [168.555781] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [168.555867] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [168.555972] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [168.565814] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [168.565943] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [168.566022] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [168.810840] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [168.822837] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [168.846817] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [168.882781] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [168.894784] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [168.954787] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [169.302773] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [169.302787] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [169.302789] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [169.302791] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [169.302793] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [169.302795] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [169.302797] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [169.302799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [169.302800] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [169.302803] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [169.302851] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [169.302853] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [169.302854] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [169.302876] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [169.303001] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [169.314761] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [169.326763] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [169.326858] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [169.326942] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [169.327029] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [169.327118] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [169.327297] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [169.327371] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [169.327442] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [169.327511] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [169.327578] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [169.327671] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [169.327901] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [169.328031] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [169.328142] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [169.328571] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [169.328684] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [169.328788] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [169.329034] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [169.329147] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [169.329242] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [169.329587] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [169.329693] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [169.329811] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [169.329880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [169.329943] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [169.330005] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [169.330065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [169.330125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [169.330184] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [169.330247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [169.330310] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [169.330373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [169.330435] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [169.330497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [169.330558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [169.330618] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [169.330678] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [169.330744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [169.330806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [169.330869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [169.330926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [169.330985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [169.331043] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [169.331097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [169.331156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [169.331215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [169.331274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [169.331336] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [169.331393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [169.331451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [169.331503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [169.331556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [169.331613] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [169.331675] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [169.331756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [169.331817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [169.331872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [169.331930] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [169.331999] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [169.332068] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [169.332140] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [169.332211] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [169.332285] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [169.332358] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [169.332436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [169.332496] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [169.332554] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [169.332612] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [169.332668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [169.332723] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [169.332803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [169.332862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [169.332920] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [169.332979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [169.333041] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [169.333107] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [169.333168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [169.333224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [169.333280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [169.333336] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [169.333392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [169.333450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [169.333508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [169.333566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [169.333623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [169.333680] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [169.333743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [169.333804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [169.333863] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [169.333927] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [169.333980] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [169.334032] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [169.334084] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [169.334173] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [169.334260] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [169.334361] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [169.334477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [169.334563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [169.334648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [169.334724] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [169.336230] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [169.338491] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [169.338576] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [169.338632] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [169.338685] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [169.338745] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [169.338797] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [169.338856] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [169.338913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [169.338967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [169.339019] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [169.339069] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [169.339117] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [169.339165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [169.339214] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [169.339267] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [169.339357] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [169.349892] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [169.350570] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [169.350659] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [169.350721] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [169.350796] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [169.350854] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [169.350914] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [169.867187] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [169.867193] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [169.867194] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [169.867339] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [169.867442] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [169.867534] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [169.867616] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [169.867740] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [169.867851] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [169.867988] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [169.868076] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [169.868160] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [169.868233] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [169.869070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [169.869141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [169.869211] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [169.869276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [169.869339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [169.869404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [169.869466] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [169.869530] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [169.869592] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [169.869654] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [169.869721] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [169.869787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [169.869849] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [169.869908] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [169.869966] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [169.870025] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [169.870083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [169.870140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [169.870197] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [169.870254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [169.870310] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [169.870370] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [169.870433] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [169.870497] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [169.870561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [169.870623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [169.870687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [169.870769] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [169.870833] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [169.870900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [169.870961] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [169.871021] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [169.871082] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [169.871144] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [169.871204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [169.871265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [169.871325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [169.871389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [169.871451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [169.871513] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [169.871696] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [169.871777] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [169.871846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [169.871917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [169.872123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [169.872227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [169.872316] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [169.872386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [169.872541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [169.872608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [169.872672] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [169.872753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [169.872825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [169.872903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [169.872963] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [169.873273] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [169.873372] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [169.873427] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [169.873479] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [169.873531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [169.873582] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [169.873632] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [169.873681] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [169.873739] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [169.873789] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [169.873838] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [169.873892] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [169.873955] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [169.874003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [169.874050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [169.874117] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [169.874198] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [169.874595] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [169.876493] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [169.893746] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [169.904884] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [169.905241] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [169.906204] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [169.906310] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [169.906387] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [169.906457] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [169.906529] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [169.906600] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [169.906667] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [169.906761] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [169.906839] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [169.908616] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [169.908734] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [169.908819] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [169.910500] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [169.910596] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [169.913592] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [169.917196] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [169.917321] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [169.917419] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [169.917510] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [169.917598] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [169.917697] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [169.917817] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [169.917904] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [169.917989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [169.918077] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [169.918164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [169.918251] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [169.918337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [169.918423] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [169.919106] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [169.920819] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [169.921892] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [169.922013] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [169.922163] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [169.943868] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [169.944582] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [169.944994] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [169.945286] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [169.945558] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [169.945883] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [169.946146] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [169.946413] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [169.946419] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [169.946424] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [169.946427] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [169.946431] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [169.946434] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [169.946438] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [169.946442] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [169.946445] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [169.946449] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [169.946929] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [169.947276] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [169.947634] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [169.948010] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [169.948376] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [169.948696] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [169.949049] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [169.949326] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [169.949593] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [169.949893] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [169.950420] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [169.950656] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [169.950929] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [169.951177] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [169.951415] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [169.951639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [169.951877] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [169.952089] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [169.952281] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [169.952472] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [169.952752] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [169.954463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [169.954614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [169.954766] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [169.954909] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [169.955048] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [169.955194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [169.955323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [169.955464] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [169.955596] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [169.955734] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [169.955878] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [169.956001] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [169.956121] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [169.956235] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [169.956349] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [169.956461] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [169.956588] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [169.956721] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [169.956840] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [169.956940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [169.957040] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [169.957141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [169.957242] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [169.957338] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [169.957434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [169.957530] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [169.957624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [169.957722] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [169.957812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [169.957909] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [169.958007] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [169.958101] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [169.958192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [169.958287] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [169.958373] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [169.958458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [169.958544] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [169.958627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [169.958709] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [169.958816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [169.959383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [169.959468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [169.959550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [169.959631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [169.959708] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [169.959803] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [169.959876] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [169.959949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [169.960018] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [169.960086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [169.960153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [169.960220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [169.960649] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [169.960721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [169.960789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [169.961443] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [169.961561] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [169.961623] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [169.961679] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [169.961746] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [169.961800] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [169.961852] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [169.961903] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [169.961954] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [169.962004] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [169.962053] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [169.962101] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [169.962150] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [169.962199] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [169.962246] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [169.962321] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [169.962406] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [169.964421] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [169.984409] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [170.005703] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [170.006281] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [170.007896] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [170.008058] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [170.011315] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [170.011485] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [170.014418] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [170.014688] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [170.061357] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [170.063808] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [170.064769] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [170.065604] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [170.066443] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [170.067638] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [170.068403] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [170.069148] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [170.071202] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [170.072171] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [170.073001] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [170.073632] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [170.074273] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [170.074859] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [170.075364] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [170.075888] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [170.076332] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [170.076778] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [170.077204] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [170.077570] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [170.077950] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [170.078298] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [170.078620] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [170.079539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [170.079956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [170.080306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [170.080623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [170.080950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [170.081400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [170.081701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [170.081985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [170.082367] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [170.082659] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [170.082943] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [170.083179] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [170.090980] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [170.092273] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [170.092447] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [170.092935] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [170.093936] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [170.094001] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [170.094617] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [170.095486] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [170.095553] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [170.096276] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [170.097302] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [170.097373] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [170.098124] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [170.099527] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [170.099580] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [170.099589] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [170.114410] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [170.119775] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13

<7> [170.121858] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [170.122008] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [170.122571] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [170.124161] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [170.124353] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [170.124488] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [170.124585] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [170.124703] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [170.125407] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [170.125504] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [170.125576] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [170.125645] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [170.125690] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [170.125803] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [170.125895] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [170.125926] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [170.126019] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [170.126107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [170.126105] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [170.126115] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [170.126580] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [170.126959] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [170.127070] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [170.127180] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [170.127306] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [170.127312] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.127314] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.127316] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [170.127318] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [170.127321] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.127322] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [170.127325] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.127326] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [170.127329] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.127346] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [170.127468] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [170.127584] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [170.128109] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [170.128121] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [170.128202] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.128204] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.128206] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.128261] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [170.128265] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [170.128269] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [170.128274] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [170.128278] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [170.128421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [170.128424] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [170.128428] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [170.128543] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [170.128545] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [170.128548] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [170.128662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [170.128665] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [170.128668] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [170.128670] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [170.128673] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [170.128692] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [170.128706] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [170.128716] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [170.128729] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [170.128780] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [170.128786] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [170.135342] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [170.135741] fbcon: xedrmfb (fb0) is primary device

<7> [170.136430] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [170.136532] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [170.136617] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [170.136721] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [170.136833] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [170.136944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [170.137052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [170.137150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [170.137232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [170.137311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [170.137391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [170.137478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [170.137585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [170.137811] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [170.137950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [170.138088] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [170.138225] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [170.138361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [170.138494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [170.138624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [170.138767] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [170.138895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [170.139021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [170.139152] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [170.139276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [170.139398] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [170.139521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [170.139672] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [170.139815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [170.139932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [170.140050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [170.140166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [170.140280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [170.140395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [170.140510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [170.140625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [170.140789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [170.140912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [170.141037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [170.141161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [170.141284] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [170.141406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [170.141528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [170.141648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [170.141765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [170.141867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [170.141968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [170.142070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [170.142173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [170.142275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [170.142376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [170.142477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [170.142578] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [170.142689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [170.142838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [170.142974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [170.143094] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [170.143209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [170.143325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [170.143440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [170.143555] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [170.143658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [170.143763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [170.143854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [170.143945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [170.144036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [170.144127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [170.144219] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [170.144314] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [170.144410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [170.144507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [170.144608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [170.144721] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [170.144884] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [170.144984] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [170.145088] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [170.145182] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [170.145263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [170.145344] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [170.145425] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [170.145504] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [170.145602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [170.145711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [170.145814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [170.145914] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [170.146014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [170.146113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [170.146214] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [170.146337] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [170.146454] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [170.146560] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [170.146669] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [170.146998] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [170.147175] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [170.147343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [170.147501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [170.147658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [170.147841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [170.147994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [170.148146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [170.148296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [170.148446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [170.148596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [170.148748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [170.148896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [170.149047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [170.149201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [170.149353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [170.149507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [170.149659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [170.149832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [170.149984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [170.150138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [170.150321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [170.150493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [170.150648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [170.150823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [170.150978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [170.151129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [170.151281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [170.151443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [170.151592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [170.151754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [170.151910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [170.152065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [170.152218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [170.152372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [170.152525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [170.152661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [170.152776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [170.152875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [170.152973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [170.153072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [170.153170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [170.153268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [170.153369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [170.153483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [170.153597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [170.153721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [170.153837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [170.153954] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [170.154070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [170.154185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [170.154303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [170.154442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [170.154566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [170.154692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [170.154804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [170.154895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [170.154984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [170.155073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [170.155153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [170.155242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [170.155330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [170.155420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [170.155507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [170.155577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [170.155645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [170.155717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [170.155968] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [170.156058] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [170.156143] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [170.156219] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [170.156304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [170.156375] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [170.156443] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [170.156506] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [170.156567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [170.156628] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [170.156693] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [170.156781] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [170.156857] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [170.156931] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [170.157005] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [170.157076] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [170.157145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [170.157234] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [170.157396] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [170.157456] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [170.157547] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [170.157620] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [170.158892] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [170.158982] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [170.159069] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<6> [170.168423] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [170.168689] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [170.168822] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [170.168949] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [170.169068] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [170.191494] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [170.377432] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [170.379854] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [170.381005] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [170.382341] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [170.383633] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [170.384892] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [170.386117] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [170.386586] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [170.389317] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [170.389925] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [170.391928] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [170.392502] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [170.392980] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [170.393418] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [170.409306] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [170.411253] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [170.411855] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [170.413471] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [170.415998] Console: switching to colour frame buffer device 180x56

<6> [170.465395] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [170.465419] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [170.466063] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [170.466632] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [170.467213] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [170.467728] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [170.468274] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [170.468777] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [170.469202] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [170.469610] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [170.470021] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [170.470418] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [170.470801] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [170.471175] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [170.471502] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [170.471847] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [170.472147] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [170.472445] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [170.472742] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [170.473051] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [170.473303] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [170.473555] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [170.473816] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [170.475209] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [170.475467] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [170.475778] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [170.475961] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [170.476004] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [170.476075] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [170.476364] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [170.476642] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [170.476789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [170.476822] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [170.476919] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [170.477160] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [170.477388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [170.478954] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [170.480832] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [170.481459] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [170.482156] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [170.483935] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [170.483973] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.483986] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.483994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [170.484012] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [170.484029] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.484040] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [170.484096] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.484105] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [170.484123] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.484273] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [170.484790] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [170.485009] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [170.485666] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [170.488806] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.488825] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.488834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.488651] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [170.489309] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [170.489162] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [170.489388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [170.489416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [170.489445] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [170.489611] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [170.489471] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [170.490143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [170.490750] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [170.491288] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [170.491865] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [170.492606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [170.492654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [170.492674] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [170.493438] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [170.493463] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [170.493481] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [170.494124] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [170.494143] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [170.494163] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [170.494177] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [170.494191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [170.495247] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [170.495381] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [170.495401] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [170.495587] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [170.510518] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [170.542883] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [170.542907] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [170.543087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [170.543109] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [170.543921] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [170.544491] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [170.544920] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [170.545252] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [170.545680] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [170.545709] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.545715] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.545718] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [170.545727] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [170.545733] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.545739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [170.545746] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.545750] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [170.545758] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.545801] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [170.546151] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [170.546489] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [170.547376] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.547384] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [170.547388] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [170.547562] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [170.547572] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [170.547583] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [170.547595] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [170.547606] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [170.548047] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [170.548061] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [170.548071] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [170.548454] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [170.548464] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [170.548473] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [170.548904] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [170.548914] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [170.548922] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [170.548929] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [170.548936] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [170.549006] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [170.549044] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [170.549053] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [170.549095] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [170.559727] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [170.583954] Console: switching to colour dummy device 80x25

<7> [170.593354] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [170.593557] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [170.594174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [170.594636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [170.595194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [170.595716] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [170.596242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [170.596959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [170.597657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [170.598321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [170.599005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [170.599670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [170.601140] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [170.604113] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [170.609298] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [170.614371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [170.614874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [170.615297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [170.615678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [170.616186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [170.616520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [170.616890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [170.617181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [170.617470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [170.618010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [170.618528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [170.619043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [170.619498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [170.620126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [170.620671] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [170.621432] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [170.622004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [170.622439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [170.622940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [170.623368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [170.623855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [170.624232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [170.624628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [170.624935] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [170.625212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [170.625489] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [170.625784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [170.626052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [170.626293] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [170.626526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [170.626883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [170.627134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [170.627353] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [170.627572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [170.627840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [170.628037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [170.628236] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [170.628426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [170.628619] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [170.628823] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [170.629180] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [170.629396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [170.629618] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [170.629889] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [170.630105] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [170.630302] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [170.630486] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [170.630714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [170.630925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [170.631097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [170.631257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [170.631408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [170.631556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [170.631704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [170.632030] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [170.632167] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [170.837898] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [170.838417] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [170.844148] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [170.844639] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [170.845203] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [170.897003] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [170.898060] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [170.905734] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [170.906180] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [170.906218] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [170.907574] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [170.908224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [170.908887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [170.909341] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [170.909716] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [170.910056] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [170.910400] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [170.910712] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [170.910999] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [170.911324] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [170.911599] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [170.911914] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [170.912241] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [170.912538] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [170.912884] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [170.913197] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [170.913630] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [170.913967] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [170.914228] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [170.914800] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [170.915264] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [170.915704] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [170.916042] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [170.916433] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [170.934042] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [170.934657] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [170.935187] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [170.935742] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [170.945465] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [170.952795] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [170.962409] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [170.972538] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [171.005646] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [171.006435] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [171.081131] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [171.083780] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [171.156746] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining)

<7> [171.413796] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [171.424656] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [171.425733] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [171.434139] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [171.441867] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [171.467638] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [171.510943] xe 0000:00:02.0: Found custom settings in configfs

<6> [171.511017] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [171.512440] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [171.512449] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [171.512555] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [171.512633] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [171.513893] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [171.514129] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [171.514208] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [171.514295] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [171.514377] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [171.514435] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [171.514489] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [171.514542] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [171.514595] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [171.514655] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [171.514754] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [171.514857] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [171.514950] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [171.515033] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [171.515109] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [171.515196] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [171.515281] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [171.515365] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [171.515444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [171.515523] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [171.515603] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [171.515685] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [171.515783] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [171.515883] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [171.515979] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [171.516054] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [171.516128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [171.516200] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [171.516273] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [171.516344] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [171.516416] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [171.516486] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [171.516557] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [171.516628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [171.516716] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [171.516817] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [171.516922] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [171.517011] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [171.517080] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [171.517149] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [171.517218] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [171.517286] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [171.517361] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [171.517803] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [171.517931] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [171.518039] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [171.518138] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [171.518234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [171.518339] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [171.518448] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [171.518541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [171.518629] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [171.518751] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [171.518862] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [171.518968] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [171.519056] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [171.519155] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [171.519261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [171.519359] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [171.519446] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [171.519531] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [171.519621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [171.519843] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [171.519945] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [171.520027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [171.520102] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [171.520177] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [171.520250] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [171.520324] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [171.520400] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [171.520491] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [171.520590] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [171.520773] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [171.520875] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [171.521011] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [171.521125] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [171.521267] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [171.521360] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [171.521436] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [171.521514] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [171.521617] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [171.521738] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [171.521870] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [171.522010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [171.522125] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [171.522239] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [171.522628] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [171.523221] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [171.523310] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [171.523384] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [171.523456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [171.523528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [171.523599] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [171.523681] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [171.523774] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [171.523866] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [171.523958] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [171.524031] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [171.524101] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [171.524171] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [171.524241] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [171.524328] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [171.524407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [171.524486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [171.524563] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [171.524633] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [171.524864] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [171.524973] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [171.525064] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [171.525156] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [171.525233] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [171.525309] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [171.525382] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [171.525455] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [171.525528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [171.525597] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [171.525666] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [171.526135] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [171.526249] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [171.526313] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [171.526370] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [171.526425] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [171.526478] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [171.526530] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [171.526581] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [171.526632] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [171.526696] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [171.526762] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [171.526826] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [171.526890] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [171.526953] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [171.533223] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<7> [171.538377] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [171.538508] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<6> [171.538589] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [171.538626] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [171.538781] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [171.538927] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [171.539044] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [171.539157] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [171.539268] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [171.539385] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [171.539494] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [171.539601] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [171.539722] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [171.539828] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [171.539935] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [171.540047] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [171.540153] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [171.540238] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [171.540321] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [171.540399] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [171.540477] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [171.540584] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [171.540695] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [171.541685] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [171.541790] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [171.541910] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [171.551719] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [171.551976] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [171.552192] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [171.794736] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [171.806738] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [171.830720] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [171.866689] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [171.878681] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [171.938693] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [172.286676] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [172.286691] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [172.286693] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [172.286694] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [172.286696] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [172.286698] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [172.286699] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [172.286701] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [172.286702] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [172.286704] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [172.286749] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [172.286750] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [172.286751] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [172.286771] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [172.286847] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [172.298664] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [172.310667] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [172.310758] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [172.310840] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [172.310926] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [172.311015] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [172.311191] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [172.311263] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [172.311334] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [172.311405] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [172.311467] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [172.311559] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [172.311779] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [172.311920] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [172.312039] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [172.312486] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [172.312601] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [172.312711] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [172.312949] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [172.313051] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [172.313138] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [172.313462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [172.313544] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [172.313623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [172.313701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [172.313766] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [172.313830] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [172.313891] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [172.313952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [172.314011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [172.314070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [172.314128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [172.314186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [172.314243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [172.314299] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [172.314354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [172.314409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [172.314465] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [172.314519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [172.314574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [172.314629] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [172.314701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [172.314759] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [172.314818] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [172.314872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [172.314926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [172.314980] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [172.315033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [172.315089] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [172.315140] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [172.315193] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [172.315245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [172.315300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [172.315359] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [172.315416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [172.315476] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [172.315536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [172.315596] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [172.315670] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [172.315740] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [172.315809] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [172.315881] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [172.315953] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [172.316024] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [172.316091] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [172.316162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [172.316221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [172.316279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [172.316337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [172.316393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [172.316448] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [172.316503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [172.316561] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [172.316619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [172.316690] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [172.316744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [172.316796] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [172.316848] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [172.316899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [172.316950] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [172.317000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [172.317051] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [172.317107] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [172.317169] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [172.317230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [172.317291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [172.317351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [172.317404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [172.317456] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [172.317510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [172.317571] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [172.317627] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [172.317701] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [172.317752] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [172.317834] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [172.317915] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [172.318011] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [172.318119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [172.318199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [172.318277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [172.318354] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [172.319774] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [172.322001] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [172.322094] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [172.322159] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [172.322212] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [172.322263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [172.322314] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [172.322364] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [172.322414] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [172.322462] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [172.322510] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [172.322558] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [172.322606] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [172.322665] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [172.322713] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [172.322762] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [172.322847] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [172.333800] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [172.334481] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [172.334564] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [172.334620] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [172.334695] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [172.334747] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [172.334801] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [172.857801] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [172.857806] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [172.857807] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [172.857988] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [172.858087] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [172.858171] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [172.858244] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [172.858357] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [172.858457] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [172.858591] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [172.858684] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [172.858769] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [172.858857] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [172.860042] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [172.860147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [172.860230] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [172.860305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [172.860376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [172.860447] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [172.860514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [172.860582] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [172.860659] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [172.860728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [172.860794] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [172.860862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [172.860925] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [172.860985] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [172.861044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [172.861103] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [172.861162] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [172.861222] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [172.861282] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [172.861340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [172.861399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [172.861457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [172.861514] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [172.861571] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [172.861630] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [172.861687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [172.861760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [172.861842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [172.861907] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [172.861971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [172.862034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [172.862096] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [172.862162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [172.862228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [172.862292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [172.862356] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [172.862419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [172.862484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [172.862549] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [172.862613] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [172.862835] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [172.862905] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [172.862965] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [172.863023] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [172.863166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [172.863226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [172.863284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [172.863342] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [172.863484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [172.863547] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [172.863608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [172.863682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [172.863744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [172.863812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [172.863884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [172.864213] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [172.864320] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [172.864374] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [172.864426] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [172.864477] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [172.864528] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [172.864578] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [172.864634] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [172.864684] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [172.864742] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [172.864805] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [172.864861] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [172.864908] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [172.864955] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [172.865002] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [172.865069] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [172.865148] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [172.865564] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [172.867519] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [172.884607] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [172.895776] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [172.896166] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [172.897304] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [172.897520] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [172.897603] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [172.897691] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [172.897767] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [172.897838] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [172.897907] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [172.897981] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [172.898061] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [172.900116] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [172.900251] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [172.900338] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [172.901698] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [172.901808] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [172.904093] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [172.908050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [172.908199] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [172.908324] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [172.908440] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [172.908552] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [172.908718] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [172.908845] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [172.908956] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [172.909067] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [172.909176] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [172.909285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [172.909394] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [172.909501] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [172.909610] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [172.910433] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [172.912270] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [172.913354] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [172.913497] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [172.913661] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [172.934917] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [172.935676] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [172.936019] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [172.936311] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [172.936659] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [172.936933] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [172.937238] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [172.937506] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [172.937512] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [172.937516] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [172.937520] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [172.937524] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [172.937528] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [172.937533] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [172.937537] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [172.937542] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [172.937546] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [172.938027] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [172.938378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [172.938834] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [172.939172] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [172.939504] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [172.939843] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [172.940157] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [172.940437] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [172.940720] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [172.941010] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [172.941554] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [172.941816] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [172.942075] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [172.942324] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [172.942563] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [172.942809] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [172.943059] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [172.943263] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [172.943457] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [172.943659] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [172.943974] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [172.945551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [172.945722] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [172.945870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [172.946013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [172.946149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [172.946285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [172.946420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [172.946566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [172.946711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [172.946856] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [172.947006] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [172.947126] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [172.947243] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [172.947357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [172.947469] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [172.947597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [172.947750] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [172.947870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [172.947981] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [172.948081] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [172.948177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [172.948273] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [172.948367] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [172.948464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [172.948561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [172.948667] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [172.948758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [172.948847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [172.948932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [172.949029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [172.949125] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [172.949219] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [172.949309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [172.949396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [172.949482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [172.949567] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [172.949661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [172.949745] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [172.949825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [172.949904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [172.950461] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [172.950545] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [172.950634] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [172.950718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [172.950796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [172.950871] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [172.950944] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [172.951014] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [172.951084] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [172.951152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [172.951227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [172.951302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [172.951840] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [172.951972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [172.952062] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [172.952782] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [172.952896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [172.952959] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [172.953022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [172.953083] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [172.953142] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [172.953197] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [172.953246] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [172.953295] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [172.953345] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [172.953394] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [172.953442] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [172.953491] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [172.953538] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [172.953585] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [172.953686] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [172.953782] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [172.955547] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [172.986753] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [173.007886] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [173.008400] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [173.010659] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [173.010971] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [173.015941] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [173.016316] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [173.022228] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [173.022595] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [173.071403] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [173.072877] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [173.073300] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [173.073711] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [173.074120] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [173.074699] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [173.075025] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [173.075337] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [173.076168] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [173.076586] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [173.077110] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [173.077509] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [173.077931] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [173.078312] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [173.078741] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [173.079111] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [173.079484] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [173.079884] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [173.080255] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [173.080673] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [173.081039] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [173.081392] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [173.081828] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [173.082610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [173.083128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [173.083553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [173.083992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [173.084422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [173.084995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [173.085341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [173.085687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [173.086152] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [173.086814] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [173.087141] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [173.087411] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [173.097975] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [173.099899] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [173.100184] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [173.100877] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [173.102786] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [173.102911] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [173.103953] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [173.105038] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [173.105141] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [173.106155] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [173.107685] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [173.107733] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [173.108272] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [173.109125] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [173.109164] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [173.109173] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [173.119564] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [173.122746] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14

<7> [173.123268] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [173.123375] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [173.124362] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [173.125522] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [173.126365] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [173.126447] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [173.126524] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [173.126593] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [173.126809] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [173.126921] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [173.127032] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [173.127108] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [173.127208] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [173.127285] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [173.127357] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [173.127460] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [173.127535] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [173.127785] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [173.127913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [173.127919] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [173.128359] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [173.128676] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [173.128794] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [173.128906] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [173.129030] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [173.129036] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.129038] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.129040] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [173.129043] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [173.129045] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.129048] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [173.129051] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.129053] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [173.129056] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.129073] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [173.129193] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [173.129298] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [173.129772] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [173.129785] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [173.129861] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.129863] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.129865] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.129923] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [173.129927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [173.129931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [173.129935] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [173.129939] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [173.130089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [173.130093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [173.130096] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [173.130221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [173.130224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [173.130227] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [173.130348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [173.130351] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [173.130355] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [173.130357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [173.130360] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [173.130378] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.130392] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [173.130395] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.130409] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [173.130463] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [173.130470] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [173.136699] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [173.137192] fbcon: xedrmfb (fb0) is primary device

<7> [173.138336] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [173.138470] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [173.138594] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [173.138869] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [173.139091] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [173.139310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [173.139521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [173.139750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [173.139949] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [173.140144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [173.140339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [173.140529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [173.140759] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [173.140951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [173.141145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [173.141335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [173.141566] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [173.141778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [173.141964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [173.142179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [173.142373] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [173.142567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [173.142783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [173.142964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [173.143150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [173.143358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [173.143550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [173.143740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [173.143903] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [173.144066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [173.144232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [173.144397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [173.144584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [173.144784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [173.144937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [173.145100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [173.145246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [173.145388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [173.145532] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [173.145682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [173.145802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [173.145919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [173.146037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [173.146152] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [173.146267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [173.146382] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [173.146497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [173.146612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [173.146795] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [173.146951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [173.147106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [173.147259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [173.147414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [173.147567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [173.147731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [173.147871] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [173.148009] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [173.148147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [173.148284] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [173.148426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [173.148564] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [173.148751] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [173.148900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [173.149046] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [173.149188] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [173.149330] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [173.149472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [173.149653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [173.149804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [173.149953] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [173.150103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [173.150252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [173.150402] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [173.150733] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [173.150879] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [173.151023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [173.151146] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [173.151258] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [173.151369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [173.151480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [173.151589] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [173.151768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [173.151935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [173.152094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [173.152253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [173.152412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [173.152595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [173.152790] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [173.152980] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [173.153136] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [173.153287] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [173.153438] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [173.153631] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [173.153781] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [173.153930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [173.154087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [173.154242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [173.154417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [173.154588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [173.154762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [173.154906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [173.155049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [173.155210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [173.155355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [173.155498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [173.155631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [173.155731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [173.155830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [173.155928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [173.156027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [173.156125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [173.156234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [173.156343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [173.156443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [173.156544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [173.156649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [173.156777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [173.156911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [173.157062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [173.157220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [173.157356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [173.157486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [173.157624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [173.157720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [173.157809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [173.157898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [173.157976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [173.158047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [173.158121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [173.158195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [173.158268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [173.158341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [173.158414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [173.158487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [173.158561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [173.158635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [173.158719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [173.158805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [173.158902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [173.158994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [173.159077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [173.159153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [173.159220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [173.159287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [173.159355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [173.159424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [173.159493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [173.159566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [173.159663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [173.159752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [173.159841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [173.159930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [173.160019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [173.160107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [173.160196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [173.160276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [173.160355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [173.160433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [173.160512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [173.160764] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [173.160914] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [173.161053] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [173.161157] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [173.161281] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [173.161382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [173.161483] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [173.161580] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [173.161690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [173.161768] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [173.161845] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [173.161920] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [173.161993] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [173.162057] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [173.162119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [173.162181] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [173.162242] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [173.162317] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [173.162463] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [173.162527] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [173.162624] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [173.162717] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [173.163632] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [173.163723] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [173.163833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [173.173795] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [173.173915] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [173.174007] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [173.178828] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [173.179072] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [173.201538] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [173.389184] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [173.391507] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [173.392865] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [173.394052] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [173.395594] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [173.397201] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [173.398578] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [173.399276] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [173.401086] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [173.401699] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [173.402677] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [173.403280] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [173.403772] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [173.404333] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [173.420177] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [173.422179] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [173.422758] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [173.424304] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [173.426907] Console: switching to colour frame buffer device 180x56

<6> [173.476316] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [173.476342] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [173.476983] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [173.477526] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [173.478109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [173.478629] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [173.479152] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [173.479652] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [173.480167] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [173.480589] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [173.481071] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [173.481456] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [173.481880] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [173.482230] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [173.482600] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [173.482967] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [173.483270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [173.483581] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [173.483968] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [173.484239] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [173.484495] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [173.484766] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [173.485052] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [173.486168] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [173.486395] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [173.486691] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [173.486962] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [173.487215] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [173.487456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [173.487821] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [173.488249] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [173.488700] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [173.489129] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [173.489673] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [173.495419] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<6> [173.498581] [IGT] xe_configfs: finished subtest ctx-restore-post-bb, SUCCESS

<6> [173.499770] [IGT] xe_configfs: exiting, ret=0

<7> [173.500154] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [173.500548] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [173.500938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [173.501257] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [173.501601] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [173.503592] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [173.503632] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [173.504366] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [173.504389] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [173.508969] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [173.509769] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [173.510303] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [173.510869] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [173.511906] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [173.511923] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.511930] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.511933] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [173.511942] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [173.511949] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.511954] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [173.511977] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.511983] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [173.511991] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.512059] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [173.512450] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [173.512867] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [173.514078] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.514087] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.514092] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.514279] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [173.514304] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [173.514316] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [173.514328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [173.514339] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [173.514877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [173.514890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [173.514900] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [173.515352] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [173.515363] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [173.515372] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [173.515738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [173.515745] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [173.515753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [173.515760] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [173.515766] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [173.516009] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.516053] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [173.516059] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [173.516128] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [173.538002] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [173.553362] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [173.553380] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [173.553479] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [173.553495] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [173.554424] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [173.555211] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [173.555705] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [173.556204] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [173.556716] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [173.556735] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.556743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.556747] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [173.556758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [173.556768] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.556777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [173.556788] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.556794] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [173.556802] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.556839] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [173.557239] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [173.557685] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [173.558622] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.558628] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [173.558632] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [173.558786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [173.558801] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [173.558814] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [173.558836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [173.558848] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [173.559250] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [173.559263] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [173.559273] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [173.559688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [173.559703] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [173.559712] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [173.560115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [173.560126] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [173.560137] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [173.560146] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [173.560154] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [173.560215] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.560253] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [173.560266] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [173.560306] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [173.570355] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [173.571993] Console: switching to colour dummy device 80x25

<7> [173.586997] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [173.587111] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [173.587373] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [173.587586] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [173.587866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [173.588076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [173.588332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [173.588636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [173.588898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [173.589142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [173.589370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [173.589652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [173.590313] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [173.603409] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [173.605796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [173.606226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [173.606681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [173.607091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [173.607415] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [173.607890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [173.608413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [173.608945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [173.609477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [173.610047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [173.610507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [173.611099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [173.611618] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [173.612086] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [173.612533] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [173.613047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [173.613521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [173.614021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [173.614459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [173.615286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [173.615753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [173.616191] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [173.616584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [173.617036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [173.617366] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [173.617416] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [173.617801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [173.618189] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [173.618552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [173.618943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [173.619275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [173.619653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [173.619980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [173.620310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [173.620635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [173.620879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [173.621123] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [173.621365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [173.621619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [173.621929] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [173.622233] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [173.622614] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [173.622820] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [173.623094] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [173.623371] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [173.623743] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [173.623988] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [173.624222] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [173.624504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [173.624800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [173.625003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [173.625201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [173.625395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [173.625584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [173.625837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [173.626257] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [173.626443] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [173.829832] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [173.830569] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [173.841227] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [173.841825] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [173.841612] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [173.842311] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [173.842675] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [173.893444] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [173.894081] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [173.894204] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [173.894127] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [173.894892] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [173.895537] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [173.895688] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [173.896169] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [173.896810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [173.897250] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [173.897717] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [173.898090] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [173.898447] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [173.898904] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [173.899308] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [173.899726] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [173.900066] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [173.900364] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [173.900650] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [173.900915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [173.901223] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [173.901477] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [173.901870] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [173.902140] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [173.902397] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [173.902958] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [173.903411] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [173.903870] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [173.904201] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [173.904622] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [173.931166] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [173.931471] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [173.931752] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [173.932083] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [173.937372] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [173.943178] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [173.957383] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [173.963187] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [174.004422] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [174.005796] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [174.076676] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [174.079614] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [174.144784] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining)

<7> [174.397805] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [174.448833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [174.449821] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [174.458357] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [174.465288] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [174.487467] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [174.534241] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [174.536617] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [174.536630] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [174.536751] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [174.536848] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [174.537804] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [174.537943] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [174.538029] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [174.538121] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [174.538204] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [174.538272] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [174.538336] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [174.538394] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [174.538448] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [174.538508] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [174.538566] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [174.538676] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [174.538770] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [174.538864] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [174.538961] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [174.539054] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [174.539140] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [174.539224] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [174.539303] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [174.539381] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [174.539459] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [174.539537] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [174.539633] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [174.539735] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [174.539837] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [174.539940] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [174.540032] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [174.540116] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [174.540199] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [174.540277] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [174.540351] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [174.540425] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [174.540499] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [174.540577] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [174.540664] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [174.540768] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [174.540876] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [174.540967] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [174.541040] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [174.541111] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [174.541181] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [174.541258] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [174.541344] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [174.541756] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [174.541896] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [174.542008] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [174.542109] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [174.542205] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [174.542309] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [174.542421] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [174.542519] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [174.542639] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [174.542778] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [174.542890] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [174.542990] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [174.543076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [174.543163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [174.543251] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [174.543337] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [174.543422] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [174.543499] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [174.543592] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [174.543693] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [174.543796] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [174.543895] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [174.543989] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [174.544076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [174.544153] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [174.544223] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [174.544301] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [174.544394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [174.544496] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [174.544747] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [174.544855] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [174.544984] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [174.545102] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [174.545247] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [174.545342] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [174.545420] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [174.545500] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [174.545611] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [174.545745] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [174.545874] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [174.545991] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [174.546105] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [174.546213] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [174.546716] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [174.547762] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [174.547882] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [174.547978] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [174.548054] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [174.548128] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [174.548201] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [174.548285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [174.548356] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [174.548428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [174.548499] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [174.548570] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [174.548669] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [174.548762] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [174.548856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [174.548959] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [174.548960] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [174.549050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [174.549110] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [174.549127] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [174.549190] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [174.549202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [174.549261] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [174.549276] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [174.549330] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [174.549350] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [174.549395] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [174.549423] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [174.549461] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [174.549497] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [174.549524] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [174.549581] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [174.549595] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [174.549668] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [174.549670] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [174.549740] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [174.549763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [174.549809] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [174.549856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [174.549877] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [174.549935] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [174.549939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [174.550009] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [174.550079] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [174.550154] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [174.557621] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [174.561661] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [174.561772] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [174.561902] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [174.562022] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [174.562159] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [174.562313] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [174.562435] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [174.562548] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [174.562692] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [174.562811] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [174.562922] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [174.563032] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [174.563142] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [174.563250] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [174.563359] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [174.563470] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [174.563593] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [174.563682] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [174.563768] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [174.563851] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [174.563932] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [174.564044] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [174.564167] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [174.565518] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [174.565594] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [174.565706] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [174.575627] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [174.575752] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [174.575830] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [174.817652] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [174.829636] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [174.853624] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [174.889609] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [174.901594] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [174.963613] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [175.311590] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [175.311605] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [175.311608] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [175.311609] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [175.311612] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [175.311614] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [175.311616] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [175.311618] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [175.311619] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [175.311620] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [175.311663] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [175.311664] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [175.311665] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [175.311687] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [175.311802] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [175.323605] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [175.335577] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [175.335681] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [175.335766] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [175.335866] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [175.335956] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [175.336114] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [175.336189] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [175.336262] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [175.336333] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [175.336401] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [175.336497] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [175.336730] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [175.336875] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [175.336991] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [175.337433] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [175.337547] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [175.337659] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [175.337889] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [175.337995] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [175.338083] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [175.338412] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [175.338502] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [175.338605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [175.338670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [175.338736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [175.338799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [175.338862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [175.338924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [175.338984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [175.339044] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [175.339103] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [175.339161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [175.339218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [175.339276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [175.339333] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [175.339389] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [175.339446] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [175.339504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [175.339572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [175.339632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [175.339692] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [175.339750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [175.339809] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [175.339864] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [175.339920] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [175.339975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [175.340029] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [175.340086] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [175.340140] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [175.340194] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [175.340247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [175.340300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [175.340356] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [175.340413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [175.340472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [175.340532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [175.340602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [175.340671] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [175.340754] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [175.340824] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [175.340902] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [175.340991] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [175.341070] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [175.341143] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [175.341221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [175.341286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [175.341348] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [175.341409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [175.341470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [175.341529] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [175.341603] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [175.341668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [175.341733] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [175.341788] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [175.341841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [175.341901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [175.341975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [175.342052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [175.342128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [175.342198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [175.342264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [175.342332] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [175.342401] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [175.342469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [175.342537] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [175.342616] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [175.342671] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [175.342728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [175.342783] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [175.342841] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [175.342894] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [175.342948] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [175.343003] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [175.343091] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [175.343179] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [175.343281] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [175.343398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [175.343485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [175.343574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [175.343663] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [175.345134] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [175.347401] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [175.347486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [175.347561] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [175.347621] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [175.347685] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [175.347740] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [175.347795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [175.347849] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [175.347901] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [175.347950] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [175.347998] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [175.348047] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [175.348099] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [175.348151] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [175.348203] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [175.348293] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [175.359703] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [175.360405] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [175.360479] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [175.360536] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [175.360608] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [175.360666] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [175.360724] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [175.883645] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [175.883650] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [175.883651] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [175.883806] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [175.883896] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [175.883979] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [175.884053] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [175.884167] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [175.884270] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [175.884424] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [175.884491] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [175.884594] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [175.884672] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [175.885521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [175.885602] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [175.885673] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [175.885741] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [175.885810] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [175.885878] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [175.885942] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [175.886011] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [175.886074] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [175.886136] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [175.886199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [175.886259] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [175.886319] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [175.886378] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [175.886436] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [175.886494] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [175.886559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [175.886628] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [175.886692] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [175.886752] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [175.886808] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [175.886864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [175.886920] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [175.886978] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [175.887036] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [175.887093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [175.887158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [175.887221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [175.887284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [175.887346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [175.887407] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [175.887467] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [175.887529] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [175.887608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [175.887687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [175.887755] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [175.887816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [175.887883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [175.887948] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [175.888012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [175.888338] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [175.888438] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [175.888524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [175.888611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [175.888783] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [175.888857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [175.888923] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [175.888985] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [175.889129] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [175.889192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [175.889254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [175.889314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [175.889375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [175.889433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [175.889492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [175.889806] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [175.889906] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [175.889961] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [175.890013] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [175.890064] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [175.890115] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [175.890164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [175.890214] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [175.890262] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [175.890309] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [175.890357] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [175.890404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [175.890451] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [175.890498] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [175.890550] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [175.890615] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [175.890700] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [175.891104] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [175.893529] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [175.911092] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [175.922328] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [175.922685] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [175.923606] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [175.923693] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [175.923748] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [175.923798] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [175.923850] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [175.923901] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [175.923951] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [175.924003] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [175.924057] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [175.926032] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [175.926119] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [175.926182] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [175.928218] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [175.928311] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [175.930624] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [175.934143] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [175.934258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [175.934344] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [175.934425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [175.934503] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [175.934609] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [175.934685] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [175.934761] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [175.934835] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [175.934917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [175.935003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [175.935087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [175.935160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [175.935229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [175.935793] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [175.937620] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [175.938590] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [175.938705] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [175.938851] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [175.959696] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [175.960364] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [175.960782] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [175.961079] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [175.961354] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [175.961711] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [175.961985] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [175.962227] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [175.962233] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [175.962237] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [175.962240] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [175.962244] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [175.962248] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [175.962252] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [175.962255] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [175.962259] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [175.962263] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [175.962727] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [175.963077] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [175.963473] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [175.963886] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [175.964223] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [175.964518] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [175.964877] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [175.965173] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [175.965438] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [175.965738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [175.966286] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [175.966523] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [175.966824] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [175.967109] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [175.967366] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [175.967611] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [175.967831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [175.968047] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [175.968253] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [175.968452] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [175.968768] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [175.970436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [175.970608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [175.970764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [175.970910] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [175.971049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [175.971191] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [175.971325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [175.971469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [175.971622] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [175.971749] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [175.971881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [175.972004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [175.972140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [175.972280] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [175.972393] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [175.972520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [175.972682] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [175.972787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [175.972892] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [175.972991] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [175.973091] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [175.973189] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [175.973284] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [175.973381] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [175.973478] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [175.973591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [175.973685] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [175.973775] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [175.973864] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [175.973964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [175.974066] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [175.974164] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [175.974257] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [175.974347] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [175.974450] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [175.974560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [175.974665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [175.974753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [175.974839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [175.974924] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [175.975480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [175.975574] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [175.975656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [175.975736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [175.975813] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [175.975888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [175.975960] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [175.976031] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [175.976100] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [175.976169] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [175.976237] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [175.976304] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [175.976744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [175.976813] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [175.976884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [175.977632] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [175.977769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [175.977834] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [175.977893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [175.977948] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [175.978003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [175.978058] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [175.978111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [175.978164] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [175.978216] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [175.978267] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [175.978318] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [175.978370] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [175.978421] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [175.978473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [175.978564] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [175.978654] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [175.980675] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [176.000009] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [176.021342] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [176.021850] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [176.023474] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [176.023765] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [176.027893] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [176.028155] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [176.031880] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [176.032149] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [176.075686] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [176.077004] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [176.077429] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [176.077872] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [176.078258] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [176.078777] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [176.079071] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [176.079352] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [176.082129] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [176.082609] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [176.083011] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [176.083464] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [176.083909] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [176.084350] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [176.084827] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [176.085231] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [176.085618] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [176.086041] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [176.086456] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [176.086872] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [176.087216] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [176.087571] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [176.087899] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [176.088649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [176.089008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [176.089400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [176.089775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [176.090090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [176.090566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [176.090883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [176.091158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [176.091526] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [176.091862] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [176.092132] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [176.092374] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [176.102883] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [176.104435] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [176.104708] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [176.105350] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [176.106290] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [176.106340] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [176.107010] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [176.108082] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [176.108124] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [176.108552] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [176.109140] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [176.109173] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [176.109568] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [176.110090] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [176.110118] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [176.110124] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [176.119887] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [176.123089] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15

<7> [176.123952] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [176.124103] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [176.124475] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [176.126589] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [176.126762] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [176.126882] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [176.126963] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [176.127092] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [176.127192] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [176.127287] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [176.127394] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [176.127469] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [176.127552] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [176.128017] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [176.128098] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [176.128165] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [176.128227] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [176.128385] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [176.128430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [176.128434] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [176.128854] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [176.129147] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [176.129252] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [176.129355] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [176.129467] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [176.129472] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [176.129474] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.129475] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [176.129477] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [176.129479] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.129481] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [176.129483] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.129485] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [176.129487] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.129500] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [176.129696] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [176.129800] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [176.130473] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [176.130484] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [176.130560] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [176.130562] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [176.130564] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.130624] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [176.130628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [176.130632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [176.130636] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [176.130640] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [176.130787] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [176.130791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [176.130795] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [176.130913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [176.130916] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [176.130919] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [176.131020] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [176.131022] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [176.131025] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [176.131026] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [176.131028] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [176.131044] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [176.131055] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [176.131057] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [176.131067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [176.131118] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [176.131123] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [176.137444] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [176.138071] fbcon: xedrmfb (fb0) is primary device

<7> [176.138765] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [176.138882] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [176.138970] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [176.139066] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [176.139157] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [176.139247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [176.139331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [176.139410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [176.139488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [176.139599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [176.139701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [176.139800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [176.139897] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [176.139995] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [176.140091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [176.140187] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [176.140282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [176.140361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [176.140440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [176.140524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [176.140658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [176.140753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [176.140847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [176.140926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [176.141002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [176.141085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [176.141182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [176.141279] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [176.141365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [176.141439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [176.141537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [176.141647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [176.141740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [176.141833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [176.141926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [176.142016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [176.142104] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [176.142193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [176.142284] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [176.142375] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [176.142458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [176.142540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [176.142626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [176.142715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [176.142805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [176.142894] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [176.142983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [176.143072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [176.143160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [176.143235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [176.143308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [176.143381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [176.143453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [176.143556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [176.143649] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [176.143742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [176.143834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [176.143915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [176.143992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [176.144068] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [176.144144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [176.144220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [176.144296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [176.144371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [176.144446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [176.144521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [176.144628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [176.144717] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [176.144806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [176.144896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [176.144977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [176.145051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [176.145126] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [176.145248] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [176.145330] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [176.145416] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [176.145498] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [176.145606] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [176.145675] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [176.145743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [176.145817] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [176.145905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [176.145996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [176.146084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [176.146168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [176.146246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [176.146323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [176.146406] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [176.146525] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [176.146669] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [176.146785] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [176.146892] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [176.147010] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [176.147114] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [176.147223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [176.147326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [176.147428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [176.147536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [176.147635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [176.147733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [176.147829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [176.147910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [176.147996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [176.148091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [176.148183] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [176.148276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [176.148367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [176.148453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [176.148551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [176.148642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [176.148733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [176.148824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [176.148910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [176.148985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [176.149065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [176.149156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [176.149247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [176.149339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [176.149430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [176.149521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [176.149647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [176.149750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [176.149846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [176.149934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [176.150021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [176.150109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [176.150197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [176.150286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [176.150374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [176.150462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [176.150561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [176.150654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [176.150747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [176.150838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [176.150930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [176.151009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [176.151086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [176.151162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [176.151237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [176.151313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [176.151388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [176.151462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [176.151536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [176.151621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [176.151710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [176.151800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [176.151879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [176.151953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [176.152028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [176.152101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [176.152175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [176.152249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [176.152324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [176.152399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [176.152474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [176.152557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [176.152645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [176.152732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [176.152819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [176.153048] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [176.153174] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [176.153299] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [176.153388] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [176.153480] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [176.153564] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [176.153645] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [176.153724] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [176.153802] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [176.153872] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [176.153934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [176.153991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [176.154047] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [176.154104] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [176.154163] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [176.154222] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [176.154281] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [176.154353] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [176.154497] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [176.154566] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [176.154670] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [176.154764] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [176.155685] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [176.155754] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [176.155847] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [176.165580] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [176.165716] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [176.165843] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [176.186588] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [176.186887] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [176.209460] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [176.372131] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [176.373981] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [176.375185] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [176.376237] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [176.377782] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [176.379064] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [176.380408] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [176.381084] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [176.382878] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [176.383295] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [176.384178] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [176.384772] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [176.385239] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [176.385796] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [176.401587] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [176.403386] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [176.403959] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [176.406222] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [176.408895] Console: switching to colour frame buffer device 180x56

<6> [176.458415] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [176.458442] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [176.459210] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [176.459851] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [176.460462] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [176.461067] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [176.461628] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [176.462132] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [176.462601] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [176.462980] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [176.463358] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [176.463739] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [176.464122] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [176.464473] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [176.464851] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [176.465177] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [176.465497] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [176.465874] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [176.466186] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [176.466512] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [176.466852] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [176.467115] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [176.467373] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [176.468742] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [176.468954] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [176.469205] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [176.469449] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [176.469722] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [176.469947] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [176.470150] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [176.470350] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [176.470544] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [176.473955] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [176.484813] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [176.484834] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [176.484961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [176.484977] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [176.485708] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [176.486244] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [176.486565] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [176.487000] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [176.487663] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [176.487678] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [176.487684] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.487688] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [176.487696] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [176.487702] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.487708] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [176.487715] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.487719] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [176.487726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.487767] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [176.488079] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [176.488358] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [176.489260] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [176.489267] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [176.489272] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [176.489468] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [176.489481] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [176.489494] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [176.489508] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [176.489542] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [176.490060] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [176.490078] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [176.490091] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [176.490621] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [176.490631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [176.490638] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [176.490967] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [176.490976] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [176.490984] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [176.490991] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [176.490998] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [176.491049] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [176.491078] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [176.491086] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [176.491124] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [176.493337] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [176.493718] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [176.501834] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [176.536635] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [176.537886] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [176.538964] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

Results for igt@xe_configfs@ctx-restore-post-bb