igt@xe_pm@d3hot-mmap-vram on shard-bmg@xe-4269-c25fd3953a459143758264a6c4dab32107bb48c4 Test details

Detail	Value
Duration	13.03 seconds
Hostname	shard-bmg-2
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4269-c25fd3953a4591437+ x86_64)
Out	Using IGT_SRANDOM=1766184401 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.028s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.028s)
Dmesg	<6> [255.346068] Console: switching to colour dummy device 80x25 <6> [255.346339] [IGT] xe_pm: executing <6> [256.395110] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [256.397349] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [256.397477] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [256.397605] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [256.397707] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [256.397804] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [256.397901] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [256.397993] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [256.398164] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [256.398257] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [256.398347] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [256.398437] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [256.398530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [256.398638] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [256.398729] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [256.398843] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [256.398919] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [256.399000] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [256.399152] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [256.399244] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [256.399336] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [256.399431] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [256.399525] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [256.399630] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [256.399722] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [256.399822] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [256.399899] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [256.399979] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [256.400081] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [256.400155] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [256.400226] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [256.400295] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.400366] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.400435] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.400510] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [256.400594] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [256.400678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [256.400772] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [256.400864] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [256.400956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [256.401061] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [256.401166] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [256.401258] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [256.401349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [256.401443] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [256.401535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [256.401649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [256.401747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [256.401840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [256.401928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [256.402014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [256.402102] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [256.402197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [256.402291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [256.402385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [256.402480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [256.402579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [256.402677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [256.402763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [256.402849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [256.402935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [256.403021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [256.403107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [256.403195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [256.403282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [256.403370] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [256.403457] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [256.403544] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [256.403649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [256.403744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [256.403835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [256.403921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [256.404007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [256.404092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [256.404184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [256.404279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000 <7> [256.404373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [256.404468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [256.404566] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [256.404662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [256.404752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [256.404841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [256.404930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [256.405017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [256.405104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [256.405191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [256.405277] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [256.405363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [256.405450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [256.405536] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [256.405647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [256.405741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [256.405830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [256.405918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.406004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.406090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.406182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [256.406276] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [256.406371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.406466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.406571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.406672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [256.406787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [256.406887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [256.406981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [256.407075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [256.407168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [256.407259] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [256.407350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [256.407439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [256.408356] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A] <7> [256.430123] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [256.430883] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [256.452622] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [256.455098] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [256.455490] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [256.456258] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [256.458485] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [256.459351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [256.459862] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [256.460299] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [256.460753] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [256.461189] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [256.461636] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [256.462056] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [256.462468] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [256.462905] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [256.463284] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [256.463685] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [256.464030] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [256.464356] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [256.464707] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [256.465022] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [256.465317] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [256.467161] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [256.467666] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [256.484544] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [256.485468] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [256.486316] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [256.488073] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [256.488594] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [256.489125] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [256.489695] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [256.490236] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [256.490749] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [256.491426] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [256.491861] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [256.492297] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [256.492703] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [256.493090] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [256.493460] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [256.493949] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [256.494251] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [256.494585] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [256.494894] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [256.495340] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [256.495701] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [256.496015] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [256.496233] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [256.496481] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [256.496694] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [256.496886] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [256.497064] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.497244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.497422] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.497628] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0 <7> [256.497842] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [256.498050] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [256.498258] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [256.498466] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [256.498723] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [256.498945] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [256.499115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [256.499292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [256.499464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [256.499634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [256.499787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [256.499936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [256.500079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [256.500221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [256.500364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [256.500499] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [256.500501] xe 0000:03:00.0: colorspace: RGB <7> [256.500504] xe 0000:03:00.0: scan mode: Underscan <7> [256.500505] xe 0000:03:00.0: colorimetry: No Data <7> [256.500507] xe 0000:03:00.0: picture aspect: 16:9 <7> [256.500509] xe 0000:03:00.0: active aspect: Same as Picture <7> [256.500511] xe 0000:03:00.0: itc: No Data <7> [256.500513] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [256.500514] xe 0000:03:00.0: quantization range: Default <7> [256.500516] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [256.500517] xe 0000:03:00.0: video code: 16 <7> [256.500519] xe 0000:03:00.0: ycc quantization range: Full <7> [256.500520] xe 0000:03:00.0: hdmi content type: Graphics <7> [256.500522] xe 0000:03:00.0: pixel repeat: 0 <7> [256.500524] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [256.500525] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [256.500527] xe 0000:03:00.0: vendor: Intel <7> [256.500529] xe 0000:03:00.0: product: Discrete gfx <7> [256.500530] xe 0000:03:00.0: source device information: PC General (0x9) <7> [256.500532] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [256.500534] xe 0000:03:00.0: empty frame <7> [256.500535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [256.500682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [256.500810] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [256.500935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [256.501057] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [256.501178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [256.501302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [256.501419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [256.501531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [256.501654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [256.501764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [256.501873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [256.501975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [256.502079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [256.502176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [256.502274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [256.502375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [256.502476] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [256.502580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750 <7> [256.502676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [256.502771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [256.502867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [256.502963] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [256.503058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [256.503153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [256.503247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [256.503342] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [256.503437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [256.503532] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [256.503647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [256.503747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [256.503846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [256.503943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [256.504039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [256.504136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [256.504231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [256.504327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.504422] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.504517] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.504618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [256.504713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [256.504807] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.504902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.504995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [256.505090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [256.505184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [256.505279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [256.505375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [256.505471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [256.505575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [256.505673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [256.505769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [256.505865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [256.506533] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B] <7> [256.534295] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [256.535332] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [256.547425] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [256.556596] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [256.557476] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B] <7> [256.559778] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [256.560651] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [256.561146] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [256.561642] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [256.562107] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [256.562583] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [256.563046] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [256.563490] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [256.563971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [256.564410] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [256.564876] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [256.565309] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [256.565764] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [256.566201] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [256.566600] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [256.566982] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [256.567375] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [256.568009] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [256.568575] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [256.569088] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [256.569921] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [256.570474] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [256.571010] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [256.571292] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [256.589654] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [256.590429] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [256.591272] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [256.592052] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [257.925053] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [257.925757] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [257.930561] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [257.935207] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [257.935748] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [257.936439] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [257.937170] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [257.940489] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [257.950772] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [257.952478] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [257.953963] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [257.957981] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [257.959269] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [257.968384] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [257.968734] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [257.968976] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [257.974231] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.976215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.978200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.980198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.982201] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.984203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.986220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.988223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.992293] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.994304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.996316] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [257.998318] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [258.000330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [258.002334] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [258.004172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [258.006172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [258.007954] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [258.007972] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [258.007981] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [258.007989] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [258.007997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [258.008006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [258.008017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [258.008027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [258.008037] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [258.008083] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [258.008428] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [258.009714] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [258.010044] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [258.012673] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [258.013259] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [258.013397] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [258.013722] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [258.013810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [258.013814] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [258.013902] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [258.015143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [258.015146] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [258.015233] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [258.040352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [258.040356] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [258.040358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [258.040360] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [258.040362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [258.040364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [258.040367] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [258.040369] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [258.040371] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [258.040528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [258.040614] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [258.040939] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [258.041026] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.041037] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [258.045171] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [258.116827] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [258.117702] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [258.118363] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [258.119012] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [258.119661] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [259.246780] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [259.247426] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [259.252101] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [259.256778] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [259.257415] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [259.258323] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [259.259251] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [259.263274] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [259.274083] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [259.275958] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [259.277423] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [259.281507] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [259.282881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [259.292842] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [259.293295] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [259.293430] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [259.299405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.301239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.303273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.305287] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.307300] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.309321] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.311354] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.313463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.317588] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.319535] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.321630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.323604] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.325534] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.327424] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.329581] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.331495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [259.333387] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [259.333417] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [259.333429] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [259.333439] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [259.333449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [259.333460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [259.333475] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [259.333519] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [259.333533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [259.333592] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [259.333879] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [259.335409] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [259.335893] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [259.338746] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [259.339379] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [259.339536] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [259.339879] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [259.339984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [259.339989] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [259.340091] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [259.341342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [259.341345] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [259.341436] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [259.366463] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [259.366467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [259.366469] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [259.366470] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [259.366473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [259.366479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [259.366482] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [259.366485] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [259.366487] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [259.366738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [259.366825] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [259.367152] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [259.367239] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [259.367251] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [259.371472] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [259.444759] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [259.445746] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [259.446575] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [259.447278] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [259.448009] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <6> [259.554607] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [259.554630] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [259.554638] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [259.554647] nvme 0000:05:00.0: [ 0] RxErr (First) <7> [260.674175] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [260.674799] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [260.679390] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [260.683959] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [260.684524] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [260.685168] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [260.685875] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [260.690309] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [260.705219] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [260.707541] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [260.709478] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [260.714778] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [260.716278] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [260.725635] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [260.725799] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [260.725950] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [260.732136] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.734041] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.735941] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.737855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.739817] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.741803] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.743829] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.745831] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.749766] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.751739] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.753767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.755741] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.757698] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.759721] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.761752] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.763811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [260.765592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [260.765604] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [260.765609] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [260.765613] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [260.765616] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [260.765620] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [260.765625] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [260.765630] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [260.765635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [260.765657] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [260.765854] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [260.767543] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [260.767711] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [260.770509] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [260.771008] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [260.771099] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [260.771533] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [260.771621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [260.771625] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [260.771711] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [260.773066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [260.773070] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [260.773158] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [260.798443] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [260.798446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [260.798449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [260.798451] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [260.798453] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [260.798455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [260.798457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [260.798459] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [260.798462] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [260.798827] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [260.798910] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [260.799351] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [260.799438] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [260.799458] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [260.803696] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [260.876776] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [260.877744] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [260.878545] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [260.879303] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [260.880059] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <6> [260.987522] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [260.987546] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [260.987554] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [260.987562] nvme 0000:05:00.0: [ 0] RxErr (First) <6> [261.096879] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [261.096903] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [261.096911] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [261.096920] nvme 0000:05:00.0: [ 0] RxErr (First) <7> [262.202570] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [262.203163] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [262.208008] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [262.212746] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [262.213540] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [262.214378] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [262.215252] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [262.219907] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [262.234337] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [262.236774] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [262.238729] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [262.244139] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [262.245960] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [262.257152] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [262.257388] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [262.257619] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [262.264090] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.266024] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.267941] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.269891] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.271877] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.273830] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.275835] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.277874] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.281949] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.283923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.285884] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.287899] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.289855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.291824] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.293903] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.295904] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [262.297641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [262.297658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [262.297664] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [262.297670] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [262.297675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [262.297681] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [262.297689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [262.297695] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [262.297702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [262.297736] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [262.298021] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [262.299717] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [262.299951] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [262.302839] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [262.303413] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [262.303506] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [262.303936] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [262.304019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [262.304023] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [262.304108] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [262.305469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [262.305473] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [262.305563] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [262.330544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [262.330547] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [262.330550] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [262.330552] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [262.330553] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [262.330555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [262.330558] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [262.330560] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [262.330562] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [262.330719] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [262.330806] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [262.331239] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [262.331327] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [262.331338] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [262.335468] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [262.404690] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [262.405645] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [262.406441] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [262.407169] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [262.407955] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [263.623095] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [263.623738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [263.628416] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [263.632979] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [263.633588] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [263.634435] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [263.635301] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [263.639262] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [263.650151] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [263.651971] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [263.653457] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [263.657514] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [263.658929] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [263.668588] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [263.669043] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [263.669231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [263.675055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.677061] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.678892] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.680742] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.682583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.684462] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.686299] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.688201] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.692159] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.694170] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.696174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.698194] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.700194] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.702197] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.704193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.706192] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [263.707971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [263.707992] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [263.708001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [263.708008] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [263.708015] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [263.708022] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [263.708031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [263.708040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [263.708049] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [263.708091] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [263.708387] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [263.710432] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [263.710764] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [263.713546] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [263.714130] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [263.714222] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [263.714553] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [263.714640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [263.714644] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [263.714729] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [263.715969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [263.715972] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [263.716059] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [263.741112] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [263.741115] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [263.741118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [263.741119] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [263.741121] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [263.741123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [263.741126] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [263.741128] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [263.741131] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [263.741295] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [263.741389] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [263.741721] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [263.741809] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [263.741820] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [263.746055] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [263.820657] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [263.821549] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [263.822213] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [263.822871] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [263.823523] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [264.946800] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [264.947462] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [264.952056] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [264.956754] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [264.957531] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [264.958432] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [264.959324] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [264.964137] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [264.978865] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [264.981160] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [264.983143] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [264.988576] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [264.990399] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [265.001487] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [265.001713] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [265.001933] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [265.008356] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.010399] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.012383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.014405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.016397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.018401] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.020400] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.022414] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.026642] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.028622] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.030832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.032714] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.034725] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.036765] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.038756] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.040775] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.042519] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [265.042535] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [265.042540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [265.042545] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [265.042550] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [265.042555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [265.042562] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [265.042568] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [265.042574] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [265.042603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [265.042855] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [265.044588] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [265.044795] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [265.047664] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [265.048202] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [265.048322] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [265.048870] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [265.048958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [265.048962] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [265.049048] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [265.050400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [265.050404] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [265.050491] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [265.075780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [265.075784] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [265.075786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [265.075788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [265.075790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [265.075792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [265.075795] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [265.075797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [265.075799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [265.075960] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [265.076049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [265.076486] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [265.076572] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [265.076583] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [265.080749] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [265.148629] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [265.149589] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [265.150383] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [265.151107] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [265.151883] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [266.469452] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [266.470278] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [266.475181] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [266.479776] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [266.480528] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [266.481398] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [266.482248] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [266.487031] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [266.497192] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [266.498804] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [266.500098] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [266.503713] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [266.504912] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [266.513765] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [266.513862] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [266.513958] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [266.520030] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.521940] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.523850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.525767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.527683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.529685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.531691] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.533718] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.537674] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.539690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.541693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.543699] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.545724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.547737] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.549683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.551730] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [266.553487] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [266.553499] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [266.553503] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [266.553507] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [266.553510] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [266.553514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [266.553520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [266.553524] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [266.553529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [266.553552] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [266.553745] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [266.555433] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [266.555593] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [266.558380] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [266.558887] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [266.558975] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [266.559417] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [266.559504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [266.559508] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [266.559595] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [266.560944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [266.560947] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [266.561035] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [266.586359] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [266.586362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [266.586364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [266.586366] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [266.586368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [266.586370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [266.586373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [266.586375] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [266.586377] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [266.586541] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [266.586630] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [266.587069] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [266.587155] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [266.587166] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [266.591399] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [266.660636] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [266.661631] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [266.662423] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [266.663141] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [266.663912] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [267.788913] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [267.789150] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [267.793384] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [267.797549] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [267.797859] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [267.798181] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [267.798322] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [267.801391] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [267.810904] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [267.812512] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [267.813801] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [267.817408] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [267.818604] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [267.827466] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [267.827567] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [267.827661] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [267.833645] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.835615] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.837579] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.839494] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.841499] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.843490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.845487] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.847486] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.851357] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.853312] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.855259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.857226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.859140] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.861055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.862970] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.864881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.866516] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [267.866522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [267.866525] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [267.866527] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [267.866529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [267.866531] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [267.866535] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [267.866538] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [267.866540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [267.866556] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [267.866682] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [267.868292] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [267.868406] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [267.871108] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [267.871574] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [267.871665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [267.872130] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [267.872227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [267.872232] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [267.872335] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [267.873691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [267.873695] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [267.873786] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [267.898754] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [267.898758] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [267.898760] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [267.898762] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [267.898764] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [267.898767] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [267.898769] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [267.898772] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [267.898774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [267.899143] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [267.899244] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [267.899704] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [267.899820] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [267.899832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [267.903979] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [267.972616] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [267.973618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [267.974474] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [267.975281] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [267.976081] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [269.113010] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [269.113637] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [269.118444] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [269.122981] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [269.123753] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [269.124617] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [269.125632] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [269.130117] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [269.144070] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [269.146481] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [269.148170] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [269.153733] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [269.155566] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [269.167834] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [269.168063] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [269.168301] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [269.174724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.176637] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.178676] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.180636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.182622] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.184682] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.186690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.188620] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.192702] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.194700] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.196643] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.198640] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.200690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.202709] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.204668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.206624] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.208445] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [269.208460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [269.208466] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [269.208471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [269.208476] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [269.208481] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [269.208488] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [269.208494] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [269.208500] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [269.208529] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [269.208768] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [269.210406] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [269.210596] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [269.213461] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [269.213987] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [269.214079] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [269.214515] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [269.214603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [269.214607] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [269.214691] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [269.216036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [269.216039] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [269.216129] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [269.241098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [269.241102] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [269.241104] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [269.241106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [269.241108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [269.241110] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [269.241112] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [269.241114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [269.241117] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [269.241375] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [269.241463] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [269.241900] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [269.241987] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [269.241998] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [269.246227] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [269.250616] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [269.250725] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [269.250831] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.250935] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [269.251034] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [269.251132] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [269.251225] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [269.251424] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [269.251520] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [269.251614] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.251710] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [269.251807] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [269.251905] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [269.251999] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [269.252114] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [269.252196] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [269.252351] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [269.252447] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [269.252540] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.252637] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [269.252732] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [269.252829] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [269.252926] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [269.253032] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [269.253112] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [269.253205] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [269.253293] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [269.253368] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [269.253442] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [269.253517] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [269.253589] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [269.253674] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1 <7> [269.253771] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [269.253862] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [269.253954] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [269.254057] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [269.254165] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [269.254265] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [269.254360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [269.254458] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [269.254552] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [269.254646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [269.254740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [269.254833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [269.254924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [269.255015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [269.255106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [269.255196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [269.255298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [269.255386] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [269.255476] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [269.255564] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [269.255653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [269.255743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [269.255837] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [269.255927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [269.256017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [269.256107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [269.256197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [269.256298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [269.256391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [269.256482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [269.256571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [269.256659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [269.256749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [269.256838] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [269.256927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [269.257015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [269.257103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [269.257191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [269.257290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000 <7> [269.257382] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [269.257471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [269.257561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [269.257651] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [269.257739] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [269.257826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [269.257914] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [269.258001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [269.258089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [269.258178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [269.258279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [269.258371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [269.258460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [269.258550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [269.258639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [269.258728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [269.258817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [269.258905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.258996] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.259088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.259179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [269.259277] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [269.259367] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.259455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.259543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.259631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [269.259719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [269.259806] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [269.259895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [269.259984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [269.260072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [269.260158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [269.260251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [269.260339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [269.260426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [269.261096] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [269.261242] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [269.261585] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [269.261671] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [269.261757] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [269.261841] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [269.261925] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [269.262008] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [269.262089] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [269.262170] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [269.262255] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [269.262334] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [269.262412] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [269.262491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [269.262570] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [269.262651] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [269.262737] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [269.262820] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [269.263112] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [269.263272] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [269.263554] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [269.263655] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [269.263745] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [269.268638] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [269.273739] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [269.274830] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [269.275216] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [269.276816] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [269.277384] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [269.284153] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [269.284427] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [269.292190] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [269.292701] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [269.294125] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [269.311953] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD <7> [269.328659] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [269.329503] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [269.334389] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [269.334903] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.335496] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [269.336046] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <6> [269.336708] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [269.336599] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [269.336620] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [269.337083] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [269.337680] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [269.338061] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [269.338433] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [269.338903] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [269.339276] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.339652] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [269.340005] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [269.340395] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [269.340717] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [269.341129] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [269.341431] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.341704] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [269.341978] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [269.342246] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [269.342493] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [269.342763] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [269.342977] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [269.343170] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [269.343529] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [269.343737] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [269.343948] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [269.344154] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [269.344377] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [269.344576] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [269.344783] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [269.344948] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [269.345093] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [269.345284] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [269.345429] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [269.345565] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [269.345694] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [269.345817] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [269.345940] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [269.346063] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [269.346178] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [269.346320] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1 <7> [269.346477] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [269.346626] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [269.346771] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [269.346918] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [269.347066] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [269.347197] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [269.347339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [269.347476] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [269.347601] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [269.347722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [269.347840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [269.347955] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [269.348067] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [269.348178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [269.348297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [269.348408] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [269.348410] xe 0000:03:00.0: colorspace: RGB <7> [269.348412] xe 0000:03:00.0: scan mode: Underscan <7> [269.348413] xe 0000:03:00.0: colorimetry: No Data <7> [269.348415] xe 0000:03:00.0: picture aspect: 16:9 <7> [269.348416] xe 0000:03:00.0: active aspect: Same as Picture <7> [269.348418] xe 0000:03:00.0: itc: No Data <7> [269.348419] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [269.348421] xe 0000:03:00.0: quantization range: Default <7> [269.348422] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [269.348424] xe 0000:03:00.0: video code: 16 <7> [269.348425] xe 0000:03:00.0: ycc quantization range: Full <7> [269.348427] xe 0000:03:00.0: hdmi content type: Graphics <7> [269.348429] xe 0000:03:00.0: pixel repeat: 0 <7> [269.348430] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [269.348432] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [269.348434] xe 0000:03:00.0: vendor: Intel <7> [269.348435] xe 0000:03:00.0: product: Discrete gfx <7> [269.348437] xe 0000:03:00.0: source device information: PC General (0x9) <7> [269.348439] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [269.348440] xe 0000:03:00.0: empty frame <7> [269.348442] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [269.348548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [269.348649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [269.348750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [269.348850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [269.348949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [269.349047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [269.349142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [269.349242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [269.349339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [269.349435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [269.349530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [269.349625] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [269.349720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [269.349813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [269.349906] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [269.350001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [269.350095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [269.350189] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750 <7> [269.350290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [269.350384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [269.350478] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [269.350573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [269.350669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [269.350768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [269.350865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [269.350962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [269.351060] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [269.351158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [269.351260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [269.351356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [269.351451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [269.351546] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [269.351642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [269.351735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [269.351830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [269.351924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.352018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.352112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.352205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [269.352313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [269.352408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.352502] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.352595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [269.352689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [269.352783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [269.352878] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [269.352974] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [269.353070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [269.353166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [269.353268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [269.353364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [269.353459] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [269.353554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [269.354450] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [269.354609] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [269.354704] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [269.354795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [269.354884] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [269.354973] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [269.355065] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [269.355153] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [269.355243] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [269.355328] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [269.355414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [269.355500] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [269.355584] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [269.355669] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [269.355753] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [269.355838] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [269.355922] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [269.361468] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [269.361789] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [269.378386] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B] <7> [269.378563] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [269.381110] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [269.396292] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [269.399773] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD <7> [269.413155] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [269.416618] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [269.417216] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [269.418294] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [269.419061] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <6> [269.425594] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [269.446407] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [269.447804] [IGT] xe_pm: exiting, ret=0 <6> [269.467624] Console: switching to colour frame buffer device 240x67

<6> [255.346068] Console: switching to colour dummy device 80x25

<6> [256.395110] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [256.397349] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [256.397477] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [256.397605] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [256.397707] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [256.397804] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.397901] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [256.397993] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [256.398164] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [256.398257] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [256.398347] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [256.398437] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [256.398530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.398638] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [256.398729] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [256.398843] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [256.398919] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [256.399000] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [256.399152] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [256.399244] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [256.399336] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [256.399431] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [256.399525] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.399630] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [256.399722] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [256.399822] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [256.399899] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [256.399979] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [256.400081] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [256.400155] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [256.400226] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [256.400295] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.400366] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.400435] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.400510] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [256.400594] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [256.400678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [256.400772] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [256.400864] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [256.400956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [256.401061] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [256.401166] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [256.401258] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [256.401349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [256.401443] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [256.401535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [256.401649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [256.401747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [256.401840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [256.401928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [256.402014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [256.402102] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [256.402197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [256.402291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [256.402385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [256.402480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [256.402579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [256.402677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [256.402763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [256.402849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [256.402935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [256.403021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [256.403107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [256.403195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [256.403282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [256.403370] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [256.403457] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [256.403544] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [256.403649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [256.403744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [256.403835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [256.403921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [256.404007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [256.404092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [256.404184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [256.404279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000

<7> [256.404373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [256.404468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [256.404566] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [256.404662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [256.404752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [256.404841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [256.404930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [256.405017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [256.405104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [256.405191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [256.405277] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [256.405363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [256.405450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [256.405536] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [256.405647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [256.405741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [256.405830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [256.405918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.406004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.406090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.406182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [256.406276] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [256.406371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.406466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.406571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.406672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [256.406787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [256.406887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [256.406981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [256.407075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [256.407168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [256.407259] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [256.407350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [256.407439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [256.408356] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A]

<7> [256.430123] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [256.430883] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [256.452622] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [256.455098] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [256.455490] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [256.456258] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [256.458485] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [256.459351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [256.459862] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [256.460299] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [256.460753] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [256.461189] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [256.461636] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [256.462056] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [256.462468] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [256.462905] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [256.463284] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [256.463685] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [256.464030] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [256.464356] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [256.464707] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [256.465022] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [256.465317] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [256.467161] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [256.467666] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [256.484544] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [256.485468] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [256.486316] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [256.488073] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [256.488594] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [256.489125] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [256.489695] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.490236] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [256.490749] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [256.491426] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [256.491861] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [256.492297] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [256.492703] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.493090] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [256.493460] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [256.493949] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [256.494251] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [256.494585] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [256.494894] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.495340] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [256.495701] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [256.496015] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [256.496233] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [256.496481] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [256.496694] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [256.496886] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [256.497064] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.497244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.497422] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.497628] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0

<7> [256.497842] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [256.498050] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [256.498258] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [256.498466] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [256.498723] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [256.498945] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [256.499115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [256.499292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [256.499464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [256.499634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [256.499787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [256.499936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [256.500079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [256.500221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [256.500364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [256.500499] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [256.500501] xe 0000:03:00.0: colorspace: RGB

<7> [256.500504] xe 0000:03:00.0: scan mode: Underscan

<7> [256.500505] xe 0000:03:00.0: colorimetry: No Data

<7> [256.500507] xe 0000:03:00.0: picture aspect: 16:9

<7> [256.500509] xe 0000:03:00.0: active aspect: Same as Picture

<7> [256.500511] xe 0000:03:00.0: itc: No Data

<7> [256.500513] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [256.500514] xe 0000:03:00.0: quantization range: Default

<7> [256.500516] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [256.500517] xe 0000:03:00.0: video code: 16

<7> [256.500519] xe 0000:03:00.0: ycc quantization range: Full

<7> [256.500520] xe 0000:03:00.0: hdmi content type: Graphics

<7> [256.500522] xe 0000:03:00.0: pixel repeat: 0

<7> [256.500524] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [256.500525] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [256.500527] xe 0000:03:00.0: vendor: Intel

<7> [256.500529] xe 0000:03:00.0: product: Discrete gfx

<7> [256.500530] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [256.500532] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [256.500535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [256.500682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [256.500810] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [256.500935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [256.501057] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [256.501178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [256.501302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [256.501419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [256.501531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [256.501654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [256.501764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [256.501873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [256.501975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [256.502079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [256.502176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [256.502274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [256.502375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [256.502476] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [256.502580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750

<7> [256.502676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [256.502771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [256.502867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [256.502963] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [256.503058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [256.503153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [256.503247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [256.503342] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [256.503437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [256.503532] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [256.503647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [256.503747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [256.503846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [256.503943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [256.504039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [256.504136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [256.504231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [256.504327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.504422] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.504517] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.504618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [256.504713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [256.504807] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.504902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.504995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [256.505090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [256.505184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [256.505279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [256.505375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [256.505471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [256.505575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [256.505673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [256.505769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [256.505865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [256.506533] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B]

<7> [256.534295] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [256.535332] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [256.547425] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [256.556596] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [256.557476] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B]

<7> [256.559778] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [256.560651] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [256.561146] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [256.561642] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [256.562107] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [256.562583] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [256.563046] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [256.563490] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [256.563971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [256.564410] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [256.564876] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [256.565309] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [256.565764] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [256.566201] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [256.566600] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [256.566982] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [256.567375] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [256.568009] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [256.568575] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [256.569088] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [256.569921] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [256.570474] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [256.571010] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [256.571292] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<7> [256.589654] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [256.590429] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [256.591272] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [256.592052] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [257.925053] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [257.925757] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [257.930561] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [257.935207] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [257.935748] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [257.936439] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [257.937170] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [257.940489] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [257.950772] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [257.952478] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [257.953963] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [257.957981] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [257.959269] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [257.968384] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [257.968734] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [257.968976] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [257.974231] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.976215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.978200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.980198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.982201] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.984203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.986220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.988223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.992293] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.994304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.996316] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [257.998318] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [258.000330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [258.002334] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [258.004172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [258.006172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [258.007954] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [258.007972] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [258.007981] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [258.007989] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [258.007997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [258.008006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [258.008017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [258.008027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [258.008037] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [258.008083] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [258.008428] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [258.009714] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [258.010044] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [258.012673] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [258.013259] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [258.013397] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [258.013722] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [258.013810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [258.013814] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [258.013902] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [258.015143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [258.015146] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [258.015233] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [258.040352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [258.040356] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [258.040358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [258.040360] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [258.040362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [258.040364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [258.040367] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [258.040369] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [258.040371] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [258.040528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [258.040614] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [258.040939] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [258.041026] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.041037] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [258.045171] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [258.116827] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [258.117702] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [258.118363] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [258.119012] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [258.119661] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [259.246780] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [259.247426] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [259.252101] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [259.256778] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [259.257415] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [259.258323] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [259.259251] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [259.263274] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [259.274083] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [259.275958] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [259.277423] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [259.281507] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [259.282881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [259.292842] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [259.293295] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [259.293430] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [259.299405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.301239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.303273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.305287] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.307300] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.309321] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.311354] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.313463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.317588] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.319535] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.321630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.323604] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.325534] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.327424] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.329581] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.331495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [259.333387] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [259.333417] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [259.333429] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [259.333439] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [259.333449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [259.333460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [259.333475] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [259.333519] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [259.333533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [259.333592] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [259.333879] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [259.335409] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [259.335893] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [259.338746] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [259.339379] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [259.339536] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [259.339879] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [259.339984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [259.339989] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [259.340091] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [259.341342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [259.341345] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [259.341436] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [259.366463] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [259.366467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [259.366469] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [259.366470] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [259.366473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [259.366479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [259.366482] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [259.366485] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [259.366487] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [259.366738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [259.366825] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [259.367152] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [259.367239] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [259.367251] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [259.371472] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [259.444759] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [259.445746] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [259.446575] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [259.447278] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [259.448009] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<6> [259.554607] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [259.554630] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [259.554638] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [259.554647] nvme 0000:05:00.0: [ 0] RxErr (First)

<7> [260.674175] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [260.674799] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [260.679390] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [260.683959] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [260.684524] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [260.685168] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [260.685875] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [260.690309] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [260.705219] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [260.707541] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [260.709478] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [260.714778] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [260.716278] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [260.725635] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [260.725799] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [260.725950] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [260.732136] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.734041] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.735941] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.737855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.739817] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.741803] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.743829] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.745831] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.749766] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.751739] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.753767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.755741] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.757698] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.759721] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.761752] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.763811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [260.765592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [260.765604] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [260.765609] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [260.765613] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [260.765616] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [260.765620] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [260.765625] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [260.765630] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [260.765635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [260.765657] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [260.765854] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [260.767543] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [260.767711] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [260.770509] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [260.771008] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [260.771099] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [260.771533] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [260.771621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [260.771625] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [260.771711] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [260.773066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [260.773070] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [260.773158] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [260.798443] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [260.798446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [260.798449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [260.798451] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [260.798453] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [260.798455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [260.798457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [260.798459] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [260.798462] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [260.798827] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [260.798910] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [260.799351] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [260.799438] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [260.799458] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [260.803696] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [260.876776] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [260.877744] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [260.878545] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [260.879303] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [260.880059] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<6> [260.987522] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [260.987546] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [260.987554] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [260.987562] nvme 0000:05:00.0: [ 0] RxErr (First)

<6> [261.096879] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [261.096903] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [261.096911] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [261.096920] nvme 0000:05:00.0: [ 0] RxErr (First)

<7> [262.202570] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [262.203163] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [262.208008] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [262.212746] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [262.213540] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [262.214378] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [262.215252] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [262.219907] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [262.234337] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [262.236774] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [262.238729] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [262.244139] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [262.245960] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [262.257152] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [262.257388] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [262.257619] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [262.264090] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.266024] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.267941] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.269891] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.271877] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.273830] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.275835] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.277874] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.281949] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.283923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.285884] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.287899] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.289855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.291824] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.293903] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.295904] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [262.297641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [262.297658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [262.297664] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [262.297670] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [262.297675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [262.297681] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [262.297689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [262.297695] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [262.297702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [262.297736] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [262.298021] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [262.299717] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [262.299951] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [262.302839] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [262.303413] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [262.303506] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [262.303936] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [262.304019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [262.304023] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [262.304108] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [262.305469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [262.305473] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [262.305563] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [262.330544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [262.330547] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [262.330550] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [262.330552] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [262.330553] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [262.330555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [262.330558] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [262.330560] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [262.330562] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [262.330719] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [262.330806] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [262.331239] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [262.331327] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [262.331338] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [262.335468] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [262.404690] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [262.405645] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [262.406441] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [262.407169] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [262.407955] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [263.623095] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [263.623738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [263.628416] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [263.632979] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [263.633588] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [263.634435] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [263.635301] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [263.639262] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [263.650151] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [263.651971] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [263.653457] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [263.657514] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [263.658929] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [263.668588] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [263.669043] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [263.669231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [263.675055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.677061] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.678892] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.680742] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.682583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.684462] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.686299] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.688201] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.692159] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.694170] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.696174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.698194] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.700194] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.702197] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.704193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.706192] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [263.707971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [263.707992] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [263.708001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [263.708008] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [263.708015] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [263.708022] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [263.708031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [263.708040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [263.708049] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [263.708091] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [263.708387] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [263.710432] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [263.710764] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [263.713546] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [263.714130] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [263.714222] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [263.714553] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [263.714640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [263.714644] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [263.714729] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [263.715969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [263.715972] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [263.716059] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [263.741112] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [263.741115] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [263.741118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [263.741119] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [263.741121] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [263.741123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [263.741126] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [263.741128] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [263.741131] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [263.741295] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [263.741389] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [263.741721] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [263.741809] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [263.741820] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [263.746055] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [263.820657] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [263.821549] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [263.822213] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [263.822871] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [263.823523] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [264.946800] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [264.947462] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [264.952056] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [264.956754] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [264.957531] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [264.958432] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [264.959324] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [264.964137] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [264.978865] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [264.981160] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [264.983143] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [264.988576] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [264.990399] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [265.001487] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [265.001713] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [265.001933] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [265.008356] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.010399] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.012383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.014405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.016397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.018401] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.020400] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.022414] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.026642] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.028622] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.030832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.032714] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.034725] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.036765] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.038756] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.040775] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.042519] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [265.042535] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [265.042540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [265.042545] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [265.042550] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [265.042555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [265.042562] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [265.042568] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [265.042574] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [265.042603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [265.042855] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [265.044588] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [265.044795] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [265.047664] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [265.048202] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [265.048322] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [265.048870] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [265.048958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [265.048962] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [265.049048] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [265.050400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [265.050404] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [265.050491] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [265.075780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [265.075784] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [265.075786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [265.075788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [265.075790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [265.075792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [265.075795] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [265.075797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [265.075799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [265.075960] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [265.076049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [265.076486] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [265.076572] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [265.076583] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [265.080749] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [265.148629] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [265.149589] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [265.150383] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [265.151107] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [265.151883] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [266.469452] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [266.470278] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [266.475181] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [266.479776] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [266.480528] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [266.481398] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [266.482248] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [266.487031] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [266.497192] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [266.498804] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [266.500098] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [266.503713] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [266.504912] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [266.513765] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [266.513862] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [266.513958] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [266.520030] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.521940] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.523850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.525767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.527683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.529685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.531691] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.533718] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.537674] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.539690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.541693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.543699] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.545724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.547737] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.549683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.551730] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [266.553487] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [266.553499] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [266.553503] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [266.553507] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [266.553510] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [266.553514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [266.553520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [266.553524] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [266.553529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [266.553552] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [266.553745] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [266.555433] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [266.555593] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [266.558380] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [266.558887] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [266.558975] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [266.559417] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [266.559504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [266.559508] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [266.559595] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [266.560944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [266.560947] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [266.561035] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [266.586359] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [266.586362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [266.586364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [266.586366] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [266.586368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [266.586370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [266.586373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [266.586375] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [266.586377] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [266.586541] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [266.586630] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [266.587069] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [266.587155] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [266.587166] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [266.591399] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [266.660636] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [266.661631] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [266.662423] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [266.663141] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [266.663912] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [267.788913] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [267.789150] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [267.793384] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [267.797549] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [267.797859] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [267.798181] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [267.798322] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [267.801391] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [267.810904] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [267.812512] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [267.813801] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [267.817408] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [267.818604] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [267.827466] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [267.827567] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [267.827661] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [267.833645] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.835615] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.837579] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.839494] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.841499] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.843490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.845487] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.847486] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.851357] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.853312] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.855259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.857226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.859140] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.861055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.862970] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.864881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.866516] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [267.866522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [267.866525] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [267.866527] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [267.866529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [267.866531] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [267.866535] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [267.866538] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [267.866540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [267.866556] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [267.866682] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [267.868292] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [267.868406] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [267.871108] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [267.871574] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [267.871665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [267.872130] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [267.872227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [267.872232] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [267.872335] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [267.873691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [267.873695] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [267.873786] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [267.898754] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [267.898758] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [267.898760] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [267.898762] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [267.898764] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [267.898767] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [267.898769] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [267.898772] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [267.898774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [267.899143] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [267.899244] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [267.899704] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [267.899820] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [267.899832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [267.903979] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [267.972616] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [267.973618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [267.974474] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [267.975281] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [267.976081] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [269.113010] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [269.113637] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [269.118444] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [269.122981] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [269.123753] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [269.124617] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [269.125632] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [269.130117] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [269.144070] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [269.146481] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [269.148170] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [269.153733] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [269.155566] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [269.167834] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [269.168063] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [269.168301] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [269.174724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.176637] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.178676] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.180636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.182622] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.184682] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.186690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.188620] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.192702] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.194700] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.196643] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.198640] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.200690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.202709] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.204668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.206624] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.208445] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [269.208460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [269.208466] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [269.208471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [269.208476] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [269.208481] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [269.208488] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [269.208494] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [269.208500] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [269.208529] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [269.208768] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [269.210406] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [269.210596] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [269.213461] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [269.213987] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [269.214079] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [269.214515] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [269.214603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [269.214607] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [269.214691] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [269.216036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [269.216039] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [269.216129] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [269.241098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [269.241102] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [269.241104] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [269.241106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [269.241108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [269.241110] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [269.241112] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [269.241114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [269.241117] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [269.241375] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [269.241463] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [269.241900] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [269.241987] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [269.241998] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [269.246227] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [269.250616] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [269.250725] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [269.250831] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.250935] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [269.251034] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [269.251132] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [269.251225] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [269.251424] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [269.251520] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [269.251614] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.251710] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [269.251807] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [269.251905] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [269.251999] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [269.252114] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [269.252196] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [269.252351] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [269.252447] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [269.252540] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.252637] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [269.252732] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [269.252829] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [269.252926] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [269.253032] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [269.253112] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [269.253205] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [269.253293] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [269.253368] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [269.253442] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [269.253517] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [269.253589] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [269.253674] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1

<7> [269.253771] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [269.253862] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [269.253954] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [269.254057] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [269.254165] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [269.254265] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [269.254360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [269.254458] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [269.254552] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [269.254646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [269.254740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [269.254833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [269.254924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [269.255015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [269.255106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [269.255196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [269.255298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [269.255386] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [269.255476] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [269.255564] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [269.255653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [269.255743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [269.255837] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [269.255927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [269.256017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [269.256107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [269.256197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [269.256298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [269.256391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [269.256482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [269.256571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [269.256659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [269.256749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [269.256838] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [269.256927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [269.257015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [269.257103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [269.257191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [269.257290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000

<7> [269.257382] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [269.257471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [269.257561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [269.257651] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [269.257739] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [269.257826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [269.257914] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [269.258001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [269.258089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [269.258178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [269.258279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [269.258371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [269.258460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [269.258550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [269.258639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [269.258728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [269.258817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [269.258905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.258996] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.259088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.259179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [269.259277] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [269.259367] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.259455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.259543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.259631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [269.259719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [269.259806] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [269.259895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [269.259984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [269.260072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [269.260158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [269.260251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [269.260339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [269.260426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [269.261096] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [269.261242] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [269.261585] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [269.261671] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [269.261757] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [269.261841] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [269.261925] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [269.262008] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [269.262089] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [269.262170] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [269.262255] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [269.262334] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [269.262412] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [269.262491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [269.262570] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [269.262651] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [269.262737] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [269.262820] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [269.263112] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [269.263272] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [269.263554] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [269.263655] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [269.263745] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [269.268638] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [269.273739] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [269.274830] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [269.275216] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [269.276816] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [269.277384] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [269.284153] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [269.284427] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [269.292190] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [269.292701] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [269.294125] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [269.311953] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD

<7> [269.328659] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [269.329503] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [269.334389] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [269.334903] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.335496] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [269.336046] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<6> [269.336708] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [269.336599] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [269.336620] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [269.337083] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [269.337680] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [269.338061] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [269.338433] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [269.338903] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [269.339276] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.339652] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [269.340005] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [269.340395] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [269.340717] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [269.341129] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [269.341431] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.341704] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [269.341978] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [269.342246] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [269.342493] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [269.342763] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [269.342977] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [269.343170] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [269.343529] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [269.343737] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [269.343948] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [269.344154] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [269.344377] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [269.344576] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [269.344783] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [269.344948] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [269.345093] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [269.345284] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [269.345429] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [269.345565] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [269.345694] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [269.345817] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [269.345940] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [269.346063] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [269.346178] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [269.346320] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1

<7> [269.346477] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [269.346626] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [269.346771] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [269.346918] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [269.347066] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [269.347197] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [269.347339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [269.347476] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [269.347601] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [269.347722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [269.347840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [269.347955] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [269.348067] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [269.348178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [269.348297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [269.348408] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [269.348410] xe 0000:03:00.0: colorspace: RGB

<7> [269.348412] xe 0000:03:00.0: scan mode: Underscan

<7> [269.348413] xe 0000:03:00.0: colorimetry: No Data

<7> [269.348415] xe 0000:03:00.0: picture aspect: 16:9

<7> [269.348416] xe 0000:03:00.0: active aspect: Same as Picture

<7> [269.348418] xe 0000:03:00.0: itc: No Data

<7> [269.348419] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [269.348421] xe 0000:03:00.0: quantization range: Default

<7> [269.348422] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [269.348424] xe 0000:03:00.0: video code: 16

<7> [269.348425] xe 0000:03:00.0: ycc quantization range: Full

<7> [269.348427] xe 0000:03:00.0: hdmi content type: Graphics

<7> [269.348429] xe 0000:03:00.0: pixel repeat: 0

<7> [269.348430] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [269.348432] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [269.348434] xe 0000:03:00.0: vendor: Intel

<7> [269.348435] xe 0000:03:00.0: product: Discrete gfx

<7> [269.348437] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [269.348439] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [269.348442] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [269.348548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [269.348649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [269.348750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [269.348850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [269.348949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [269.349047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [269.349142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [269.349242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [269.349339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [269.349435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [269.349530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [269.349625] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [269.349720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [269.349813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [269.349906] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [269.350001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [269.350095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [269.350189] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750

<7> [269.350290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [269.350384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [269.350478] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [269.350573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [269.350669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [269.350768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [269.350865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [269.350962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [269.351060] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [269.351158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [269.351260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [269.351356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [269.351451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [269.351546] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [269.351642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [269.351735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [269.351830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [269.351924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.352018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.352112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.352205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [269.352313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [269.352408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.352502] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.352595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [269.352689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [269.352783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [269.352878] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [269.352974] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [269.353070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [269.353166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [269.353268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [269.353364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [269.353459] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [269.353554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [269.354450] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [269.354609] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [269.354704] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [269.354795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [269.354884] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [269.354973] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [269.355065] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [269.355153] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [269.355243] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [269.355328] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [269.355414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [269.355500] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [269.355584] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [269.355669] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [269.355753] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [269.355838] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [269.355922] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [269.361468] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [269.361789] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [269.378386] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B]

<7> [269.378563] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [269.381110] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [269.396292] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [269.399773] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD

<7> [269.413155] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [269.416618] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [269.417216] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [269.418294] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [269.419061] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<6> [269.425594] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [269.446407] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [269.467624] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram