igt@xe_pm@d3hot-mmap-vram on shard-bmg@xe-4268-d2fe88bbc66599aedc08d081a76460e34fb56786 Test details

Detail	Value
Duration	13.13 seconds
Hostname	shard-bmg-3
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4268-d2fe88bbc66599aed+ x86_64)
Out	Using IGT_SRANDOM=1766170048 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.131s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.131s)
Dmesg	<6> [263.247705] Console: switching to colour dummy device 80x25 <6> [263.247966] [IGT] xe_pm: executing <6> [264.324186] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [264.326035] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [264.326144] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [264.326253] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [264.326400] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [264.326531] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [264.326664] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [264.326791] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [264.327005] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [264.327129] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [264.327257] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [264.327389] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [264.327516] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [264.327644] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [264.327769] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [264.327924] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [264.328032] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [264.328147] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [264.328403] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [264.328527] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [264.328649] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [264.328777] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [264.328902] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [264.329031] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [264.329158] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [264.329334] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [264.329461] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [264.329577] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [264.329726] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [264.329829] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [264.329932] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [264.330035] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [264.330137] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [264.330244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [264.330366] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [264.330468] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [264.330589] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [264.330715] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [264.330838] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [264.330961] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [264.331109] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [264.331280] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [264.331409] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [264.331533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [264.331662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [264.331787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [264.331910] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [264.332030] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [264.332150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [264.332296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [264.332420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [264.332541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [264.332659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [264.332777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [264.332898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [264.333021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [264.333142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [264.333280] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [264.333404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [264.333523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [264.333642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [264.333760] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [264.333880] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [264.333998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [264.334116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [264.334246] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [264.334379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [264.334501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [264.334621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [264.334740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [264.334858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [264.334975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [264.335091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [264.335209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [264.335362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [264.335490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000 <7> [264.335611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [264.335731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [264.335848] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [264.335969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [264.336089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [264.336207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [264.336356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [264.336482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [264.336600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [264.336717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [264.336833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [264.336949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [264.337066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [264.337182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [264.337320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [264.337450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [264.337569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [264.337688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.337804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.337921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.338037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [264.338152] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [264.338286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.338414] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.338537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.338656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [264.338782] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [264.338900] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [264.339022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [264.339140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [264.339284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [264.339407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [264.339531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [264.339654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [264.340626] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A] <7> [264.360984] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [264.361557] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [264.383525] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [264.385747] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [264.386422] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [264.386526] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [264.388658] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [264.389349] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [264.389685] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [264.390009] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [264.390378] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [264.390688] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [264.390887] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [264.390967] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [264.391047] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [264.391125] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [264.391205] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [264.391298] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [264.391371] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [264.391443] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [264.391516] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [264.391589] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [264.391664] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [264.393217] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [264.393525] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [264.398147] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [264.398779] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [264.399368] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [264.400598] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [264.400898] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [264.401212] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [264.401605] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [264.401903] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [264.402183] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [264.402653] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [264.402914] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [264.403175] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [264.403476] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [264.403739] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [264.403970] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [264.404319] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [264.404548] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [264.404772] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [264.404985] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [264.405196] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [264.405436] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [264.405671] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [264.405832] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [264.406018] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [264.406172] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [264.406339] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [264.406481] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [264.406622] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [264.406754] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [264.406906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0 <7> [264.407080] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [264.407247] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [264.407405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [264.407578] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [264.407746] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [264.407896] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [264.408038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [264.408194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [264.408364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [264.408509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [264.408641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [264.408771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [264.408897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [264.409021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [264.409142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [264.409279] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [264.409281] xe 0000:03:00.0: colorspace: RGB <7> [264.409283] xe 0000:03:00.0: scan mode: Underscan <7> [264.409285] xe 0000:03:00.0: colorimetry: No Data <7> [264.409286] xe 0000:03:00.0: picture aspect: No Data <7> [264.409288] xe 0000:03:00.0: active aspect: Same as Picture <7> [264.409289] xe 0000:03:00.0: itc: No Data <7> [264.409291] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [264.409292] xe 0000:03:00.0: quantization range: Full <7> [264.409293] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [264.409295] xe 0000:03:00.0: video code: 0 <7> [264.409296] xe 0000:03:00.0: ycc quantization range: Full <7> [264.409298] xe 0000:03:00.0: hdmi content type: Graphics <7> [264.409300] xe 0000:03:00.0: pixel repeat: 0 <7> [264.409301] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [264.409303] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [264.409305] xe 0000:03:00.0: vendor: Intel <7> [264.409307] xe 0000:03:00.0: product: Discrete gfx <7> [264.409309] xe 0000:03:00.0: source device information: PC General (0x9) <7> [264.409311] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [264.409312] xe 0000:03:00.0: empty frame <7> [264.409314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [264.409436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [264.409559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [264.409677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [264.409791] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [264.409903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [264.410011] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [264.410122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [264.410238] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [264.410352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [264.410460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [264.410568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [264.410674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [264.410774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [264.410873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [264.410968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [264.411066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [264.411160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750 <7> [264.411261] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [264.411355] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [264.411448] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [264.411540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [264.411630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [264.411717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [264.411804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [264.411891] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [264.411979] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [264.412066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [264.412153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [264.412244] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [264.412332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [264.412420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [264.412507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [264.412595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [264.412682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [264.412770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.412857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.412944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.413032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [264.413120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [264.413206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.413311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.413399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [264.413486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [264.413573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [264.413661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [264.413752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [264.413845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [264.413936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [264.414025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [264.414114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [264.414201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [264.414712] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B] <7> [264.448444] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [264.449480] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [264.462043] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [264.471396] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B] <7> [264.473925] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [264.474810] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [264.475331] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [264.475885] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [264.476369] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [264.476878] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [264.477332] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [264.477810] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [264.478289] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [264.478777] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [264.479203] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [264.479711] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [264.480181] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [264.480656] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [264.481104] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [264.481526] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [264.481910] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [264.482517] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [264.483046] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [264.483589] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [264.484444] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [264.484974] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [264.485469] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [264.485746] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [264.492325] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [264.493016] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [264.493692] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [264.494307] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [264.494918] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [265.856173] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [265.856849] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [265.861571] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [265.866141] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [265.866618] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [265.867284] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [265.867939] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [265.871339] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [265.882068] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [265.883896] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [265.885367] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [265.889469] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [265.890862] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [265.900307] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [265.900493] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [265.900752] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [265.905900] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.907720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.909600] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.911582] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.913419] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.915268] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.917083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.918917] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.922774] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.924749] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.926740] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.928734] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.930732] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.932723] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.934721] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.936730] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [265.938511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [265.938532] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [265.938542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [265.938551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [265.938560] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [265.938569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [265.938581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [265.938593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [265.938605] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [265.938653] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [265.938876] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [265.940150] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [265.940535] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [265.942793] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [265.943321] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [265.943412] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [265.943740] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [265.943825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [265.943829] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [265.943917] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [265.945164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [265.945168] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [265.945282] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [265.970411] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [265.970415] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [265.970417] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [265.970419] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [265.970421] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [265.970423] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [265.970427] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [265.970429] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [265.970431] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [265.970683] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [265.970770] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [265.971092] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [265.971175] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [265.971186] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [265.975431] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [266.044383] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [266.045159] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [266.045919] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [266.046598] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [266.047198] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [267.177485] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [267.178128] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [267.182870] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [267.187568] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [267.188175] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [267.189113] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [267.190027] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [267.194122] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [267.204976] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [267.206916] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [267.208389] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [267.212530] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [267.213950] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [267.223816] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [267.224246] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [267.224379] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [267.230297] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.232163] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.234077] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.236086] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.237921] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.239751] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.241586] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.243501] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.247313] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.249263] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.251098] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.253086] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.254920] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.256750] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.258585] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.260488] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [267.262199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [267.262246] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [267.262262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [267.262276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [267.262291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [267.262300] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [267.262311] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [267.262320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [267.262329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [267.262370] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [267.262627] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [267.264069] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [267.264425] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [267.267036] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [267.267594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [267.267686] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [267.268012] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [267.268096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [267.268100] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [267.268185] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [267.269436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [267.269439] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [267.269524] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [267.294859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [267.294863] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [267.294865] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [267.294867] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [267.294869] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [267.294871] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [267.294874] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [267.294877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [267.294879] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [267.295133] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [267.295230] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [267.295561] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [267.295646] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [267.295658] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [267.299790] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [267.372539] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [267.373418] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [267.374084] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [267.374745] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [267.375402] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [268.505199] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [268.505844] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [268.510585] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [268.515430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [268.515997] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [268.516672] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [268.517458] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [268.521927] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [268.536907] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [268.539285] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [268.541398] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [268.546941] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [268.548488] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [268.558107] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [268.558292] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [268.558460] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [268.564647] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.566574] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.568549] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.570546] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.572538] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.574571] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.576559] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.578611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.582566] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.584532] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.586491] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.588514] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.590483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.592508] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.594554] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.596626] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [268.598329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [268.598341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [268.598346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [268.598350] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [268.598354] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [268.598358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [268.598363] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [268.598368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [268.598373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [268.598395] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [268.598598] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [268.600285] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [268.600455] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [268.603271] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [268.603771] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [268.603875] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [268.604307] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [268.604394] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [268.604398] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [268.604485] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [268.605829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [268.605832] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [268.605917] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [268.631390] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [268.631393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [268.631395] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [268.631397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [268.631399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [268.631401] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [268.631404] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [268.631407] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [268.631409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [268.631566] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [268.631650] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [268.632075] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [268.632159] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [268.632170] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [268.636313] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [268.708547] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [268.709546] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [268.710320] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [268.711057] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [268.711813] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [269.829438] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [269.830081] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [269.834731] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [269.839462] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [269.840177] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [269.841102] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [269.842005] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [269.846709] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [269.862175] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [269.864663] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [269.866627] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [269.872148] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [269.874004] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [269.885252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [269.885499] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [269.885737] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [269.892154] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.894143] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.896171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.898228] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.900305] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.902353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.904397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.906630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.910684] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.912652] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.914611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.916628] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.918599] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.920649] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.922599] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.924635] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [269.926360] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [269.926377] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [269.926383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [269.926388] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [269.926393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [269.926399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [269.926406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [269.926413] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [269.926419] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [269.926448] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [269.926718] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [269.928463] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [269.928684] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [269.931558] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [269.932165] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [269.932269] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [269.932712] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [269.932801] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [269.932805] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [269.932894] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [269.934237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [269.934240] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [269.934330] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [269.960051] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [269.960055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [269.960057] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [269.960059] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [269.960061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [269.960063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [269.960066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [269.960068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [269.960071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [269.960431] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [269.960517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [269.960951] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [269.961034] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [269.961045] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [269.965249] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [270.036363] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [270.037283] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [270.038058] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [270.038829] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [270.039611] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [271.351170] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [271.351875] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [271.356779] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [271.361300] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [271.362014] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [271.362889] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [271.363761] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [271.368066] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [271.382370] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [271.384744] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [271.386689] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [271.392123] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [271.393914] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [271.404188] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [271.404418] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [271.404647] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [271.411171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.413215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.415238] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.417266] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.419285] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.421310] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.423352] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.425374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.429465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.431515] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.433480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.435399] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.437438] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.439472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.441650] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.443591] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [271.445340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [271.445352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [271.445357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [271.445360] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [271.445364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [271.445368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [271.445373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [271.445378] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [271.445382] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [271.445403] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [271.445598] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [271.447288] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [271.447441] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [271.450262] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [271.450760] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [271.450896] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [271.451337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [271.451423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [271.451426] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [271.451512] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [271.452866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [271.452869] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [271.452956] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [271.478154] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [271.478157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [271.478159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [271.478161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [271.478163] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [271.478165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [271.478168] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [271.478171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [271.478173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [271.478551] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [271.478640] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [271.479071] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [271.479156] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [271.479167] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [271.483379] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [271.556352] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [271.557339] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [271.558068] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [271.558855] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [271.559598] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [272.874342] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [272.874934] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [272.879779] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [272.884648] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [272.885324] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [272.886124] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [272.886978] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [272.890239] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [272.900746] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [272.902467] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [272.903961] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [272.908067] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [272.909466] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [272.919073] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [272.919506] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [272.919664] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [272.925493] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.927317] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.929166] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.930985] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.932821] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.934809] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.936679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.938538] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.942306] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.944275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.946328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.948398] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.950428] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.952302] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.954215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.956043] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [272.957832] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [272.957854] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [272.957863] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [272.957871] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [272.957878] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [272.957886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [272.957896] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [272.957905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [272.957915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [272.957954] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [272.958277] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [272.959709] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [272.960036] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [272.962544] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [272.963085] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [272.963218] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [272.963554] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [272.963640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [272.963643] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [272.963726] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [272.964962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [272.964965] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [272.965051] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [272.989907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [272.989910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [272.989912] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [272.989914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [272.989916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [272.989918] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [272.989921] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [272.989924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [272.989926] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [272.990191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [272.990281] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [272.990612] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [272.990699] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.990710] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [272.994813] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [273.068435] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [273.069307] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [273.069936] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [273.070609] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [273.071225] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [274.401385] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [274.402021] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [274.406881] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [274.411504] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [274.412247] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [274.413076] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [274.414007] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [274.418823] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [274.433364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [274.435721] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [274.437672] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [274.442834] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [274.444653] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [274.455989] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [274.456239] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [274.456460] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [274.462852] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.464797] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.466735] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.468690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.470684] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.472683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.474683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.476642] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.480688] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.482611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.484601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.486583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.488526] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.490548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.492539] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.494827] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [274.496809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [274.496824] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [274.496831] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [274.496838] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [274.496844] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [274.496850] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [274.496859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [274.496867] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [274.496875] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [274.496906] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [274.497194] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [274.499075] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [274.499318] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [274.502217] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [274.502769] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [274.502861] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [274.503306] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [274.503398] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [274.503401] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.503488] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [274.504834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [274.504837] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [274.504923] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [274.530457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [274.530460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [274.530462] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [274.530464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [274.530466] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [274.530468] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [274.530471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [274.530473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [274.530475] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [274.530850] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [274.530936] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [274.531378] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [274.531462] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [274.531473] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [274.535588] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [274.604386] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [274.605388] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [274.606150] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [274.606898] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [274.607651] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [275.724586] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [275.725186] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [275.729826] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [275.734397] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [275.735131] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [275.735969] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [275.736876] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [275.741575] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [275.755872] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [275.758261] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [275.760222] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [275.765687] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [275.767212] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [275.778567] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [275.778812] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [275.778969] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [275.785315] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.787367] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.789404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.791377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.793340] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.795360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.797403] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.799465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.803542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.805457] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.807488] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.809470] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.811485] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.813451] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.815456] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.817463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [275.819258] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [275.819273] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [275.819279] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [275.819284] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [275.819289] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [275.819294] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [275.819301] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [275.819307] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [275.819313] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [275.819343] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [275.819581] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [275.821326] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [275.821530] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [275.824403] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [275.824948] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [275.825049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [275.825506] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [275.825594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [275.825598] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.825683] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [275.827028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [275.827031] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [275.827127] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [275.852089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [275.852092] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [275.852094] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [275.852096] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [275.852098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [275.852100] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [275.852103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [275.852105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [275.852108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [275.852483] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [275.852577] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [275.853019] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [275.853116] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [275.853127] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [275.857322] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [275.932362] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [275.933371] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [275.934132] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [275.934898] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [275.935647] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [277.147856] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [277.148551] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [277.153320] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [277.158064] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [277.158802] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [277.159728] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [277.160883] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [277.165886] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [277.180538] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [277.182992] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [277.184987] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [277.189858] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [277.191712] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [277.202661] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [277.202904] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [277.203167] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [277.209480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.211414] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.213467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.215468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.217369] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.219372] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.221310] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.223517] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.227433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.229431] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.231392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.233391] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.235384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.237349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.239400] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.241421] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [277.243228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [277.243243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [277.243249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [277.243254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [277.243259] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [277.243264] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [277.243270] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [277.243276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [277.243282] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [277.243309] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [277.243561] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [277.245271] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [277.245475] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [277.248333] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [277.248862] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [277.248952] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [277.249399] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [277.249486] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [277.249490] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [277.249576] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [277.250929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [277.250933] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [277.251026] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [277.276328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [277.276333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [277.276336] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [277.276338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [277.276341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [277.276343] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [277.276347] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850 <7> [277.276349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [277.276352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1 <7> [277.276723] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [277.276816] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [277.277244] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [277.277331] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [277.277342] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [277.281472] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [277.285827] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [277.285936] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [277.286048] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.286150] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [277.286251] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [277.286351] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [277.286450] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [277.286638] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [277.286734] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [277.286827] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.286925] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [277.287022] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [277.287131] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [277.287226] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [277.287341] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [277.287422] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [277.287564] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [277.287659] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [277.287754] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.287849] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [277.287944] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [277.288049] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [277.288145] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [277.288252] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [277.288331] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [277.288427] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [277.288504] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [277.288578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [277.288653] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [277.288727] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [277.288801] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [277.288887] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1 <7> [277.288986] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [277.289088] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [277.289181] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [277.289286] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [277.289393] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [277.289487] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [277.289582] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [277.289680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [277.289775] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [277.289868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [277.289961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [277.290057] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [277.290150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [277.290244] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [277.290336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [277.290426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [277.290516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [277.290605] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [277.290694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [277.290782] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [277.290871] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [277.290959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [277.291050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [277.291139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [277.291227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [277.291315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [277.291403] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [277.291490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [277.291578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [277.291665] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [277.291754] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [277.291841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [277.291929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [277.292017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [277.292115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [277.292204] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [277.292292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [277.292379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [277.292468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000 <7> [277.292557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [277.292646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [277.292734] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [277.292824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [277.292912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [277.293000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [277.293108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [277.293221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [277.293329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [277.293419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [277.293509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [277.293598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [277.293688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [277.293777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [277.293865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [277.293954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [277.294051] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [277.294143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.294234] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.294325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.294414] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [277.294504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [277.294597] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.294690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.294782] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.294872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [277.294962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [277.295055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [277.295146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [277.295235] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [277.295325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [277.295415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [277.295504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [277.295594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [277.295682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [277.296360] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [277.296500] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [277.296842] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [277.296928] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [277.297014] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [277.297110] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [277.297196] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [277.297278] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [277.297358] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [277.297442] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [277.297521] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [277.297599] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [277.297678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [277.297762] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [277.297844] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [277.297924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [277.298004] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [277.298090] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [277.298383] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [277.298546] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [277.298825] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [277.298930] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [277.299024] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [277.303903] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [277.308989] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [277.310069] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [277.310451] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [277.311978] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [277.312539] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [277.318961] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [277.319262] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [277.325954] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [277.326267] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [277.327573] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [277.345198] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD <7> [277.362252] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [277.363008] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [277.367798] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [277.368371] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.368885] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [277.369411] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [277.369867] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [277.370330] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [277.370963] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [277.371425] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.371529] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [277.371828] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [277.371780] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [277.372167] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [277.372580] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [277.372914] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [277.373409] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [277.373715] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.374052] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [277.374346] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [277.374607] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [277.374860] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [277.375178] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [277.375398] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [277.375595] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [277.375948] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [277.376202] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [277.376430] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [277.376642] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [277.376849] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [277.377068] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [277.377289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [277.377465] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [277.377615] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [277.377802] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [277.377940] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [277.378093] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [277.378234] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [277.378402] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [277.378527] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [277.378651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [277.378769] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [277.378902] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1 <7> [277.379079] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [277.379254] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [277.379393] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [277.379542] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [277.379692] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [277.379825] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [277.379960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [277.380116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [277.380245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [277.380364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [277.380479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [277.380591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [277.380708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [277.380821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [277.380929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [277.381041] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [277.381043] xe 0000:03:00.0: colorspace: RGB <7> [277.381045] xe 0000:03:00.0: scan mode: Underscan <7> [277.381046] xe 0000:03:00.0: colorimetry: No Data <7> [277.381048] xe 0000:03:00.0: picture aspect: No Data <7> [277.381049] xe 0000:03:00.0: active aspect: Same as Picture <7> [277.381051] xe 0000:03:00.0: itc: No Data <7> [277.381052] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [277.381053] xe 0000:03:00.0: quantization range: Full <7> [277.381055] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [277.381056] xe 0000:03:00.0: video code: 0 <7> [277.381057] xe 0000:03:00.0: ycc quantization range: Full <7> [277.381058] xe 0000:03:00.0: hdmi content type: Graphics <7> [277.381060] xe 0000:03:00.0: pixel repeat: 0 <7> [277.381061] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [277.381063] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [277.381064] xe 0000:03:00.0: vendor: Intel <7> [277.381066] xe 0000:03:00.0: product: Discrete gfx <7> [277.381067] xe 0000:03:00.0: source device information: PC General (0x9) <7> [277.381069] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [277.381070] xe 0000:03:00.0: empty frame <7> [277.381072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [277.381180] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [277.381285] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [277.381385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [277.381486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [277.381583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [277.381679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [277.381771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [277.381862] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [277.381959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [277.382055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [277.382148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [277.382237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [277.382325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [277.382413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [277.382502] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [277.382591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [277.382680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750 <7> [277.382769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [277.382858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [277.382946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [277.383040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [277.383128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [277.383216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [277.383304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [277.383396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [277.383484] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [277.383579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [277.383671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [277.383762] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [277.383851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [277.383940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [277.384032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [277.384120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [277.384209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [277.384302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.384394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.384485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.384575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [277.384664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [277.384752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.384840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.384927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.385013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [277.385110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [277.385198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [277.385288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [277.385375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [277.385463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [277.385551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [277.385638] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [277.385726] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [277.385814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [277.386704] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [277.386853] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [277.386943] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [277.387043] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [277.387129] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [277.387212] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [277.387294] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [277.387375] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [277.387456] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [277.387538] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [277.387619] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [277.387701] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [277.387786] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [277.387869] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [277.387950] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [277.388035] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [277.388116] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [277.395066] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [277.395387] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [277.411714] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B] <7> [277.411895] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [277.414460] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [277.428063] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [277.433212] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 32 bytes ELD <7> [277.447073] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [277.449539] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [277.450135] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [277.451054] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [277.451774] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <6> [277.458006] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [277.479302] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [277.481364] [IGT] xe_pm: exiting, ret=0 <6> [277.500458] Console: switching to colour frame buffer device 240x67

<6> [263.247705] Console: switching to colour dummy device 80x25

<6> [264.324186] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [264.326035] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [264.326144] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [264.326253] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [264.326400] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [264.326531] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [264.326664] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [264.326791] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [264.327005] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [264.327129] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [264.327257] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [264.327389] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [264.327516] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [264.327644] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [264.327769] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [264.327924] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [264.328032] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [264.328147] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [264.328403] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [264.328527] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [264.328649] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [264.328777] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [264.328902] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [264.329031] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [264.329158] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [264.329334] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [264.329461] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [264.329577] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [264.329726] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [264.329829] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [264.329932] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [264.330035] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [264.330137] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [264.330244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [264.330366] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [264.330468] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [264.330589] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [264.330715] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [264.330838] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [264.330961] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [264.331109] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [264.331280] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [264.331409] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [264.331533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [264.331662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [264.331787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [264.331910] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [264.332030] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [264.332150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [264.332296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [264.332420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [264.332541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [264.332659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [264.332777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [264.332898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [264.333021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [264.333142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [264.333280] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [264.333404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [264.333523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [264.333642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [264.333760] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [264.333880] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [264.333998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [264.334116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [264.334246] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [264.334379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [264.334501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [264.334621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [264.334740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [264.334858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [264.334975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [264.335091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [264.335209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [264.335362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [264.335490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000

<7> [264.335611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [264.335731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [264.335848] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [264.335969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [264.336089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [264.336207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [264.336356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [264.336482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [264.336600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [264.336717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [264.336833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [264.336949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [264.337066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [264.337182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [264.337320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [264.337450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [264.337569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [264.337688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.337804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.337921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.338037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [264.338152] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [264.338286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.338414] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.338537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.338656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [264.338782] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [264.338900] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [264.339022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [264.339140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [264.339284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [264.339407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [264.339531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [264.339654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [264.340626] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A]

<7> [264.360984] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [264.361557] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [264.383525] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [264.385747] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [264.386422] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [264.386526] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [264.388658] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [264.389349] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [264.389685] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [264.390009] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [264.390378] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [264.390688] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [264.390887] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [264.390967] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [264.391047] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [264.391125] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [264.391205] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [264.391298] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [264.391371] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [264.391443] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [264.391516] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [264.391589] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [264.391664] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [264.393217] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [264.393525] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [264.398147] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [264.398779] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [264.399368] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [264.400598] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [264.400898] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [264.401212] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [264.401605] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [264.401903] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [264.402183] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [264.402653] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [264.402914] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [264.403175] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [264.403476] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [264.403739] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [264.403970] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [264.404319] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [264.404548] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [264.404772] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [264.404985] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [264.405196] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [264.405436] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [264.405671] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [264.405832] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [264.406018] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [264.406172] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [264.406339] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [264.406481] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [264.406622] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [264.406754] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [264.406906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0

<7> [264.407080] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [264.407247] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [264.407405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [264.407578] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [264.407746] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [264.407896] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [264.408038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [264.408194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [264.408364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [264.408509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [264.408641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [264.408771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [264.408897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [264.409021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [264.409142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [264.409279] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [264.409281] xe 0000:03:00.0: colorspace: RGB

<7> [264.409283] xe 0000:03:00.0: scan mode: Underscan

<7> [264.409285] xe 0000:03:00.0: colorimetry: No Data

<7> [264.409286] xe 0000:03:00.0: picture aspect: No Data

<7> [264.409288] xe 0000:03:00.0: active aspect: Same as Picture

<7> [264.409289] xe 0000:03:00.0: itc: No Data

<7> [264.409291] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [264.409292] xe 0000:03:00.0: quantization range: Full

<7> [264.409293] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [264.409295] xe 0000:03:00.0: video code: 0

<7> [264.409296] xe 0000:03:00.0: ycc quantization range: Full

<7> [264.409298] xe 0000:03:00.0: hdmi content type: Graphics

<7> [264.409300] xe 0000:03:00.0: pixel repeat: 0

<7> [264.409301] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [264.409303] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [264.409305] xe 0000:03:00.0: vendor: Intel

<7> [264.409307] xe 0000:03:00.0: product: Discrete gfx

<7> [264.409309] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [264.409311] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [264.409314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [264.409436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [264.409559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [264.409677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [264.409791] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [264.409903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [264.410011] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [264.410122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [264.410238] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [264.410352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [264.410460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [264.410568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [264.410674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [264.410774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [264.410873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [264.410968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [264.411066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [264.411160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750

<7> [264.411261] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [264.411355] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [264.411448] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [264.411540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [264.411630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [264.411717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [264.411804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [264.411891] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [264.411979] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [264.412066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [264.412153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [264.412244] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [264.412332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [264.412420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [264.412507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [264.412595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [264.412682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [264.412770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.412857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.412944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.413032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [264.413120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [264.413206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.413311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.413399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [264.413486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [264.413573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [264.413661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [264.413752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [264.413845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [264.413936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [264.414025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [264.414114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [264.414201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [264.414712] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B]

<7> [264.448444] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [264.449480] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [264.462043] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [264.471396] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B]

<7> [264.473925] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [264.474810] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [264.475331] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [264.475885] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [264.476369] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [264.476878] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [264.477332] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [264.477810] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [264.478289] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [264.478777] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [264.479203] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [264.479711] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [264.480181] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [264.480656] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [264.481104] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [264.481526] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [264.481910] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [264.482517] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [264.483046] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [264.483589] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [264.484444] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [264.484974] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [264.485469] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [264.485746] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<7> [264.492325] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [264.493016] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [264.493692] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [264.494307] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [264.494918] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [265.856173] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [265.856849] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [265.861571] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [265.866141] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [265.866618] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [265.867284] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [265.867939] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [265.871339] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [265.882068] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [265.883896] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [265.885367] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [265.889469] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [265.890862] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [265.900307] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [265.900493] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [265.900752] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [265.905900] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.907720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.909600] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.911582] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.913419] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.915268] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.917083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.918917] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.922774] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.924749] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.926740] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.928734] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.930732] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.932723] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.934721] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.936730] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [265.938511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [265.938532] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [265.938542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [265.938551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [265.938560] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [265.938569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [265.938581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [265.938593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [265.938605] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [265.938653] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [265.938876] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [265.940150] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [265.940535] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [265.942793] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [265.943321] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [265.943412] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [265.943740] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [265.943825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [265.943829] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [265.943917] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [265.945164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [265.945168] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [265.945282] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [265.970411] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [265.970415] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [265.970417] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [265.970419] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [265.970421] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [265.970423] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [265.970427] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [265.970429] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [265.970431] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [265.970683] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [265.970770] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [265.971092] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [265.971175] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [265.971186] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [265.975431] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [266.044383] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [266.045159] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [266.045919] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [266.046598] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [266.047198] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [267.177485] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [267.178128] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [267.182870] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [267.187568] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [267.188175] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [267.189113] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [267.190027] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [267.194122] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [267.204976] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [267.206916] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [267.208389] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [267.212530] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [267.213950] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [267.223816] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [267.224246] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [267.224379] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [267.230297] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.232163] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.234077] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.236086] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.237921] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.239751] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.241586] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.243501] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.247313] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.249263] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.251098] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.253086] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.254920] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.256750] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.258585] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.260488] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [267.262199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [267.262246] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [267.262262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [267.262276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [267.262291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [267.262300] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [267.262311] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [267.262320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [267.262329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [267.262370] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [267.262627] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [267.264069] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [267.264425] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [267.267036] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [267.267594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [267.267686] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [267.268012] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [267.268096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [267.268100] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [267.268185] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [267.269436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [267.269439] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [267.269524] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [267.294859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [267.294863] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [267.294865] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [267.294867] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [267.294869] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [267.294871] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [267.294874] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [267.294877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [267.294879] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [267.295133] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [267.295230] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [267.295561] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [267.295646] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [267.295658] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [267.299790] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [267.372539] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [267.373418] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [267.374084] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [267.374745] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [267.375402] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [268.505199] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [268.505844] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [268.510585] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [268.515430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [268.515997] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [268.516672] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [268.517458] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [268.521927] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [268.536907] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [268.539285] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [268.541398] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [268.546941] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [268.548488] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [268.558107] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [268.558292] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [268.558460] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [268.564647] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.566574] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.568549] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.570546] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.572538] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.574571] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.576559] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.578611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.582566] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.584532] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.586491] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.588514] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.590483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.592508] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.594554] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.596626] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [268.598329] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [268.598341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [268.598346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [268.598350] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [268.598354] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [268.598358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [268.598363] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [268.598368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [268.598373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [268.598395] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [268.598598] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [268.600285] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [268.600455] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [268.603271] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [268.603771] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [268.603875] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [268.604307] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [268.604394] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [268.604398] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [268.604485] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [268.605829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [268.605832] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [268.605917] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [268.631390] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [268.631393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [268.631395] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [268.631397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [268.631399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [268.631401] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [268.631404] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [268.631407] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [268.631409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [268.631566] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [268.631650] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [268.632075] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [268.632159] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [268.632170] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [268.636313] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [268.708547] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [268.709546] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [268.710320] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [268.711057] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [268.711813] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [269.829438] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [269.830081] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [269.834731] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [269.839462] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [269.840177] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [269.841102] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [269.842005] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [269.846709] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [269.862175] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [269.864663] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [269.866627] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [269.872148] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [269.874004] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [269.885252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [269.885499] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [269.885737] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [269.892154] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.894143] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.896171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.898228] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.900305] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.902353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.904397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.906630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.910684] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.912652] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.914611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.916628] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.918599] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.920649] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.922599] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.924635] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [269.926360] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [269.926377] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [269.926383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [269.926388] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [269.926393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [269.926399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [269.926406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [269.926413] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [269.926419] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [269.926448] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [269.926718] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [269.928463] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [269.928684] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [269.931558] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [269.932165] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [269.932269] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [269.932712] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [269.932801] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [269.932805] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [269.932894] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [269.934237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [269.934240] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [269.934330] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [269.960051] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [269.960055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [269.960057] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [269.960059] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [269.960061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [269.960063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [269.960066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [269.960068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [269.960071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [269.960431] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [269.960517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [269.960951] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [269.961034] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [269.961045] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [269.965249] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [270.036363] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [270.037283] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [270.038058] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [270.038829] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [270.039611] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [271.351170] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [271.351875] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [271.356779] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [271.361300] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [271.362014] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [271.362889] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [271.363761] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [271.368066] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [271.382370] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [271.384744] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [271.386689] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [271.392123] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [271.393914] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [271.404188] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [271.404418] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [271.404647] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [271.411171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.413215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.415238] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.417266] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.419285] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.421310] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.423352] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.425374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.429465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.431515] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.433480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.435399] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.437438] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.439472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.441650] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.443591] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [271.445340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [271.445352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [271.445357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [271.445360] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [271.445364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [271.445368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [271.445373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [271.445378] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [271.445382] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [271.445403] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [271.445598] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [271.447288] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [271.447441] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [271.450262] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [271.450760] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [271.450896] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [271.451337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [271.451423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [271.451426] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [271.451512] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [271.452866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [271.452869] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [271.452956] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [271.478154] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [271.478157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [271.478159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [271.478161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [271.478163] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [271.478165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [271.478168] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [271.478171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [271.478173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [271.478551] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [271.478640] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [271.479071] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [271.479156] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [271.479167] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [271.483379] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [271.556352] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [271.557339] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [271.558068] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [271.558855] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [271.559598] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [272.874342] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [272.874934] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [272.879779] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [272.884648] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [272.885324] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [272.886124] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [272.886978] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [272.890239] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [272.900746] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [272.902467] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [272.903961] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [272.908067] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [272.909466] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [272.919073] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [272.919506] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [272.919664] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [272.925493] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.927317] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.929166] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.930985] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.932821] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.934809] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.936679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.938538] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.942306] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.944275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.946328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.948398] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.950428] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.952302] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.954215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.956043] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [272.957832] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [272.957854] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [272.957863] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [272.957871] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [272.957878] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [272.957886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [272.957896] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [272.957905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [272.957915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [272.957954] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [272.958277] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [272.959709] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [272.960036] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [272.962544] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [272.963085] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [272.963218] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [272.963554] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [272.963640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [272.963643] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [272.963726] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [272.964962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [272.964965] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [272.965051] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [272.989907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [272.989910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [272.989912] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [272.989914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [272.989916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [272.989918] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [272.989921] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [272.989924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [272.989926] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [272.990191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [272.990281] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [272.990612] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [272.990699] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.990710] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [272.994813] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [273.068435] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [273.069307] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [273.069936] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [273.070609] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [273.071225] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [274.401385] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [274.402021] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [274.406881] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [274.411504] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [274.412247] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [274.413076] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [274.414007] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [274.418823] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [274.433364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [274.435721] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [274.437672] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [274.442834] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [274.444653] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [274.455989] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [274.456239] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [274.456460] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [274.462852] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.464797] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.466735] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.468690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.470684] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.472683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.474683] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.476642] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.480688] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.482611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.484601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.486583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.488526] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.490548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.492539] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.494827] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [274.496809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [274.496824] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [274.496831] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [274.496838] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [274.496844] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [274.496850] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [274.496859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [274.496867] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [274.496875] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [274.496906] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [274.497194] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [274.499075] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [274.499318] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [274.502217] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [274.502769] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [274.502861] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [274.503306] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [274.503398] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [274.503401] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.503488] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [274.504834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [274.504837] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [274.504923] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [274.530457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [274.530460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [274.530462] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [274.530464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [274.530466] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [274.530468] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [274.530471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [274.530473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [274.530475] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [274.530850] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [274.530936] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [274.531378] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [274.531462] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [274.531473] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [274.535588] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [274.604386] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [274.605388] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [274.606150] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [274.606898] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [274.607651] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [275.724586] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [275.725186] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [275.729826] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [275.734397] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [275.735131] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [275.735969] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [275.736876] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [275.741575] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [275.755872] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [275.758261] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [275.760222] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [275.765687] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [275.767212] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [275.778567] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [275.778812] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [275.778969] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [275.785315] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.787367] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.789404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.791377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.793340] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.795360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.797403] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.799465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.803542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.805457] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.807488] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.809470] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.811485] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.813451] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.815456] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.817463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [275.819258] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [275.819273] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [275.819279] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [275.819284] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [275.819289] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [275.819294] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [275.819301] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [275.819307] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [275.819313] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [275.819343] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [275.819581] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [275.821326] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [275.821530] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [275.824403] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [275.824948] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [275.825049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [275.825506] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [275.825594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [275.825598] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.825683] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [275.827028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [275.827031] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [275.827127] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [275.852089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [275.852092] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [275.852094] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [275.852096] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [275.852098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [275.852100] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [275.852103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [275.852105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [275.852108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [275.852483] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [275.852577] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [275.853019] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [275.853116] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [275.853127] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [275.857322] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [275.932362] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [275.933371] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [275.934132] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [275.934898] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [275.935647] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [277.147856] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [277.148551] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [277.153320] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [277.158064] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [277.158802] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [277.159728] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [277.160883] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [277.165886] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [277.180538] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [277.182992] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [277.184987] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [277.189858] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [277.191712] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [277.202661] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [277.202904] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [277.203167] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [277.209480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.211414] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.213467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.215468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.217369] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.219372] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.221310] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.223517] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.227433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.229431] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.231392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.233391] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.235384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.237349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.239400] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.241421] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [277.243228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [277.243243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [277.243249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [277.243254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [277.243259] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [277.243264] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [277.243270] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [277.243276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [277.243282] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [277.243309] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [277.243561] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [277.245271] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [277.245475] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [277.248333] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [277.248862] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [277.248952] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [277.249399] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [277.249486] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [277.249490] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [277.249576] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [277.250929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [277.250933] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [277.251026] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [277.276328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [277.276333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [277.276336] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [277.276338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [277.276341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [277.276343] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [277.276347] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor 28E850

<7> [277.276349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [277.276352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 32, SAD count 1

<7> [277.276723] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [277.276816] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [277.277244] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [277.277331] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [277.277342] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [277.281472] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [277.285827] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [277.285936] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [277.286048] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.286150] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [277.286251] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.286351] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [277.286450] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [277.286638] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [277.286734] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [277.286827] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.286925] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [277.287022] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.287131] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [277.287226] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [277.287341] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [277.287422] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [277.287564] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [277.287659] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [277.287754] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.287849] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [277.287944] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.288049] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [277.288145] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [277.288252] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [277.288331] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [277.288427] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [277.288504] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [277.288578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [277.288653] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [277.288727] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [277.288801] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [277.288887] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1

<7> [277.288986] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [277.289088] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [277.289181] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [277.289286] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [277.289393] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [277.289487] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [277.289582] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [277.289680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [277.289775] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [277.289868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [277.289961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [277.290057] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [277.290150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [277.290244] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [277.290336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [277.290426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [277.290516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [277.290605] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [277.290694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [277.290782] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [277.290871] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [277.290959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [277.291050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [277.291139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [277.291227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [277.291315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [277.291403] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [277.291490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [277.291578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [277.291665] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [277.291754] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [277.291841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [277.291929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [277.292017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [277.292115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [277.292204] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [277.292292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [277.292379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [277.292468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000

<7> [277.292557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [277.292646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [277.292734] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [277.292824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [277.292912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [277.293000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [277.293108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [277.293221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [277.293329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [277.293419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [277.293509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [277.293598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [277.293688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [277.293777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [277.293865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [277.293954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [277.294051] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [277.294143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.294234] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.294325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.294414] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [277.294504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [277.294597] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.294690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.294782] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.294872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [277.294962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [277.295055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [277.295146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [277.295235] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [277.295325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [277.295415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [277.295504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [277.295594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [277.295682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [277.296360] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [277.296500] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [277.296842] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [277.296928] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [277.297014] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [277.297110] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [277.297196] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [277.297278] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [277.297358] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [277.297442] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [277.297521] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [277.297599] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [277.297678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [277.297762] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [277.297844] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [277.297924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [277.298004] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [277.298090] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [277.298383] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [277.298546] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [277.298825] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [277.298930] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [277.299024] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [277.303903] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [277.308989] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [277.310069] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [277.310451] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [277.311978] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [277.312539] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [277.318961] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [277.319262] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [277.325954] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [277.326267] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [277.327573] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [277.345198] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD

<7> [277.362252] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [277.363008] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [277.367798] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [277.368371] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.368885] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [277.369411] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.369867] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [277.370330] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [277.370963] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [277.371425] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.371529] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [277.371828] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [277.371780] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [277.372167] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.372580] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [277.372914] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [277.373409] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [277.373715] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.374052] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [277.374346] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.374607] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [277.374860] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [277.375178] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [277.375398] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [277.375595] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [277.375948] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [277.376202] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [277.376430] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [277.376642] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.376849] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [277.377068] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [277.377289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [277.377465] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [277.377615] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [277.377802] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [277.377940] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [277.378093] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [277.378234] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [277.378402] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [277.378527] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [277.378651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [277.378769] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [277.378902] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1

<7> [277.379079] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [277.379254] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [277.379393] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [277.379542] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [277.379692] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [277.379825] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [277.379960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [277.380116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [277.380245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [277.380364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [277.380479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [277.380591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [277.380708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [277.380821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [277.380929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [277.381041] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [277.381043] xe 0000:03:00.0: colorspace: RGB

<7> [277.381045] xe 0000:03:00.0: scan mode: Underscan

<7> [277.381046] xe 0000:03:00.0: colorimetry: No Data

<7> [277.381048] xe 0000:03:00.0: picture aspect: No Data

<7> [277.381049] xe 0000:03:00.0: active aspect: Same as Picture

<7> [277.381051] xe 0000:03:00.0: itc: No Data

<7> [277.381052] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [277.381053] xe 0000:03:00.0: quantization range: Full

<7> [277.381055] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [277.381056] xe 0000:03:00.0: video code: 0

<7> [277.381057] xe 0000:03:00.0: ycc quantization range: Full

<7> [277.381058] xe 0000:03:00.0: hdmi content type: Graphics

<7> [277.381060] xe 0000:03:00.0: pixel repeat: 0

<7> [277.381061] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [277.381063] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [277.381064] xe 0000:03:00.0: vendor: Intel

<7> [277.381066] xe 0000:03:00.0: product: Discrete gfx

<7> [277.381067] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [277.381069] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [277.381072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [277.381180] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [277.381285] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [277.381385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [277.381486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [277.381583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [277.381679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [277.381771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [277.381862] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [277.381959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [277.382055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [277.382148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [277.382237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [277.382325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [277.382413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [277.382502] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [277.382591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [277.382680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750

<7> [277.382769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [277.382858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [277.382946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [277.383040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [277.383128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [277.383216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [277.383304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [277.383396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [277.383484] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [277.383579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [277.383671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [277.383762] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [277.383851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [277.383940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [277.384032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [277.384120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [277.384209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [277.384302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.384394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.384485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.384575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [277.384664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [277.384752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.384840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.384927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.385013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [277.385110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [277.385198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [277.385288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [277.385375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [277.385463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [277.385551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [277.385638] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [277.385726] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [277.385814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [277.386704] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [277.386853] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [277.386943] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [277.387043] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [277.387129] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [277.387212] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [277.387294] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [277.387375] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [277.387456] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [277.387538] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [277.387619] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [277.387701] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [277.387786] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [277.387869] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [277.387950] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [277.388035] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [277.388116] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [277.395066] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [277.395387] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [277.411714] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B]

<7> [277.411895] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [277.414460] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [277.428063] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [277.433212] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 32 bytes ELD

<7> [277.447073] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [277.449539] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [277.450135] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [277.451054] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [277.451774] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<6> [277.458006] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [277.479302] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [277.500458] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram