<5>[ 0.000000] Linux version 6.18.0-rc7-lgci-xe-xe-4168-7fe1b006b65af67bc+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Nov 28 17:22:13 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem263: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000383] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000384] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004882] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004890] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004907] Using GB pages for direct mapping <6>[ 0.005529] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005530] printk: early log buf free: 258816(98%) <6>[ 0.005531] Secure boot disabled <6>[ 0.005533] ACPI: Early table checksum verification disabled <6>[ 0.005536] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005538] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005542] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005545] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005547] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005548] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005549] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005551] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005552] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005553] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005555] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005556] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005558] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005559] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005562] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005563] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005564] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005570] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005574] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005575] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005576] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005577] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005579] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005581] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005584] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005585] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005587] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005588] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005589] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005590] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005592] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005594] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005596] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005597] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005598] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005600] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005601] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005602] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005604] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005605] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005606] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005607] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005608] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005609] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005609] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005609] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005610] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005610] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005610] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005610] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005611] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005611] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005611] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005612] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005615] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005615] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005615] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005615] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005617] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005618] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005618] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005618] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005619] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005619] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005620] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005621] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005622] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005622] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005697] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005900] No NUMA configuration found <6>[ 0.005901] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005906] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006021] Zone ranges: <6>[ 0.006021] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006022] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006023] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006023] Device empty <6>[ 0.006024] Movable zone start for each node <6>[ 0.006025] Early memory node ranges <6>[ 0.006025] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006026] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006026] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006027] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006028] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006033] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006047] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007615] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035433] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035441] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035933] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035940] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.035989] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.035991] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.035992] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.035995] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.035996] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036008] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036014] TSC deadline timer available <6>[ 0.036016] CPU topo: Max. logical packages: 1 <6>[ 0.036016] CPU topo: Max. logical dies: 1 <6>[ 0.036017] CPU topo: Max. dies per package: 1 <6>[ 0.036018] CPU topo: Max. threads per core: 1 <6>[ 0.036018] CPU topo: Num. cores per package: 8 <6>[ 0.036019] CPU topo: Num. threads per package: 8 <6>[ 0.036019] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036031] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036032] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036033] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036034] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036035] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036035] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036037] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036038] Booting paravirtualized kernel on bare hardware <6>[ 0.036039] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036048] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036375] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036379] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036380] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036393] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036479] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036495] random: crng init done <6>[ 0.038331] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039235] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039295] software IO TLB: area num 8. <6>[ 0.046620] Fallback order for Node 0: 0 <6>[ 0.046623] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046624] Policy zone: Normal <6>[ 0.046633] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046634] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046637] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047552] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.080332] ********************************************************** <4>[ 0.080333] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080333] ** ** <4>[ 0.080333] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080334] ** via the console, logs, and other interfaces. This ** <4>[ 0.080334] ** might reduce the security of your system. ** <4>[ 0.080334] ** ** <4>[ 0.080334] ** If you see this message and you are not debugging ** <4>[ 0.080334] ** the kernel, report this immediately to your system ** <4>[ 0.080334] ** administrator! ** <4>[ 0.080335] ** ** <4>[ 0.080335] ** Use hash_pointers=always to force this mode off ** <4>[ 0.080335] ** ** <4>[ 0.080335] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080335] ********************************************************** <6>[ 0.081448] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089677] ftrace: allocating 60622 entries in 240 pages <6>[ 0.089678] ftrace: allocated 240 pages with 4 groups <6>[ 0.091088] Dynamic Preempt: voluntary <6>[ 0.091574] Running RCU self tests <6>[ 0.091575] Running RCU synchronous self tests <6>[ 0.091575] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091576] rcu: RCU lockdep checking is enabled. <6>[ 0.091576] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091577] Trampoline variant of Tasks RCU enabled. <6>[ 0.091577] Rude variant of Tasks RCU enabled. <6>[ 0.091577] Tracing variant of Tasks RCU enabled. <6>[ 0.091578] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091578] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091642] Running RCU synchronous self tests <6>[ 0.091646] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091649] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091651] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101808] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102272] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102689] Console: colour dummy device 80x25 <6>[ 0.102698] printk: legacy console [tty0] enabled <6>[ 0.103831] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103839] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103843] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103846] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103850] ... CLASSHASH_SIZE: 4096 <6>[ 0.103853] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103857] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103861] ... CHAINHASH_SIZE: 262144 <6>[ 0.103864] memory used by lock dependency info: 54145 kB <6>[ 0.103869] memory used for stack traces: 4224 kB <6>[ 0.103872] per task-struct memory footprint: 1920 bytes <6>[ 0.103921] ACPI: Core revision 20250807 <6>[ 0.104781] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104844] APIC: Switch to symmetric I/O mode setup <6>[ 0.104850] DMAR: Host address width 38 <6>[ 0.104853] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104883] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104917] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104938] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104964] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104985] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105018] DMAR: SATC flags: 0x1 <6>[ 0.105027] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105032] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105036] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107065] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112176] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112195] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112271] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112277] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112461] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112466] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112476] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112487] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112494] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112499] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112503] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112511] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112526] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112533] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112538] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112543] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112550] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112556] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112564] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112569] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112574] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112580] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112585] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113189] Freeing SMP alternatives memory: 56K <6>[ 0.113189] pid_max: default: 32768 minimum: 301 <6>[ 0.113189] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.113189] landlock: Up and running. <6>[ 0.113189] Yama: becoming mindful. <6>[ 0.113189] AppArmor: AppArmor initialized <6>[ 0.113189] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113189] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113189] Running RCU synchronous self tests <6>[ 0.113189] Running RCU synchronous self tests <6>[ 0.113189] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113189] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113189] core: cpu_core PMU driver: <6>[ 0.113189] ... version: 6 <6>[ 0.113189] ... bit width: 48 <6>[ 0.113189] ... generic counters: 10 <6>[ 0.113189] ... generic bitmap: 00000000000003ff <6>[ 0.113189] ... fixed-purpose counters: 4 <6>[ 0.113189] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113189] ... value mask: 0000ffffffffffff <6>[ 0.113189] ... max period: 00007fffffffffff <6>[ 0.113189] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113246] signal: max sigframe size: 3632 <6>[ 0.113270] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113371] rcu: Hierarchical SRCU implementation. <6>[ 0.113375] rcu: Max phase no-delay instances is 400. <6>[ 0.113518] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115341] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115605] smp: Bringing up secondary CPUs ... <6>[ 0.115954] smpboot: x86: Booting SMP configuration: <6>[ 0.115960] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010733] core: cpu_atom PMU driver: <6>[ 0.010733] ... version: 6 <6>[ 0.010733] ... bit width: 48 <6>[ 0.010733] ... generic counters: 8 <6>[ 0.010733] ... generic bitmap: 00000000000000ff <6>[ 0.010733] ... fixed-purpose counters: 6 <6>[ 0.010733] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010733] ... value mask: 0000ffffffffffff <6>[ 0.010733] ... max period: 00007fffffffffff <6>[ 0.010733] ... global_ctrl mask: 00000077000000ff <6>[ 0.121293] smp: Brought up 1 node, 8 CPUs <6>[ 0.121293] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.123329] Memory: 32358244K/33158528K available (25429K kernel code, 5652K rwdata, 9544K rodata, 5704K init, 68232K bss, 777192K reserved, 0K cma-reserved) <6>[ 0.125025] devtmpfs: initialized <6>[ 0.125367] x86/mm: Memory block size: 128MB <6>[ 0.146233] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.146752] Running RCU synchronous self tests <6>[ 0.146765] Running RCU synchronous self tests <6>[ 0.147451] Running RCU Tasks wait API self tests <6>[ 0.256309] Running RCU Tasks Rude wait API self tests <6>[ 0.256309] Running RCU Tasks Trace wait API self tests <6>[ 0.269251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.269665] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.270817] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.274002] pinctrl core: initialized pinctrl subsystem <6>[ 0.279212] PM: RTC time: 18:49:47, date: 2025-11-28 <6>[ 0.283186] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.285050] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.285444] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.285821] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.285937] audit: initializing netlink subsys (disabled) <5>[ 0.286289] audit: type=2000 audit(1764355787.174:1): state=initialized audit_enabled=0 res=1 <6>[ 0.287855] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.287859] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.287871] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.287881] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.287891] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.287961] cpuidle: using governor ladder <6>[ 0.287961] cpuidle: using governor menu <6>[ 0.288241] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.288319] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.289360] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.289410] PCI: Using configuration type 1 for base access <6>[ 0.289633] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.292490] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.292490] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.292490] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.292490] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.300275] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.300282] raid6: using avx2x2 recovery algorithm <6>[ 0.300920] fbcon: Taking over console <6>[ 0.301060] ACPI: Added _OSI(Module Device) <6>[ 0.301066] ACPI: Added _OSI(Processor Device) <6>[ 0.301072] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.926855] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.940942] ACPI: EC: EC started <6>[ 0.940954] ACPI: EC: interrupt blocked <6>[ 0.943308] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.943313] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.008352] Callback from call_rcu_tasks() invoked. <6>[ 1.223026] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.223039] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.250033] ACPI: Interpreter enabled <6>[ 1.250128] ACPI: PM: (supports S0 S4 S5) <6>[ 1.250133] ACPI: Using IOAPIC for interrupt routing <6>[ 1.255773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.255780] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.304551] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.304622] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.364169] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.364470] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.367621] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.749269] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.762770] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.900264] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.901884] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.910692] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.920177] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.920442] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.920698] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.126552] ACPI: \_TZ_.FN00: New power resource <6>[ 2.127087] ACPI: \_TZ_.FN01: New power resource <6>[ 2.127612] ACPI: \_TZ_.FN02: New power resource <6>[ 2.128133] ACPI: \_TZ_.FN03: New power resource <6>[ 2.129014] ACPI: \_TZ_.FN04: New power resource <6>[ 2.130389] ACPI: \PIN_: New power resource <6>[ 2.134122] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.134137] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.137556] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.155257] PCI host bridge to bus 0000:00 <6>[ 2.155333] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.155350] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.155362] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.155375] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.155393] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.155412] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.161140] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.162254] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.162348] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.162362] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.162375] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.162433] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.164829] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.164863] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.166856] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.166890] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.166901] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.168670] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.168712] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.168726] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.168747] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.168866] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.168968] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.175878] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.175923] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.175939] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.175960] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.176083] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.176193] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.183298] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.183345] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.183361] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.183381] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.183512] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.183605] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.188189] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.189267] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.189286] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.189670] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.189703] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.189714] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.190416] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.190471] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.190550] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.193185] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.193239] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.193251] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.193485] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.193493] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.195582] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.195637] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.195649] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.195716] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.195723] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.198267] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.198328] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.198407] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.202567] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.202660] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.202774] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.203499] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.203554] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.203630] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.206911] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.206979] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.206989] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.207344] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.207456] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.220450] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.220666] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.236890] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.237106] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.254375] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.254590] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.267230] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.267375] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.267530] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.273006] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.273062] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.273076] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.273089] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.273270] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.273383] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.279086] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.279189] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.279230] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.279572] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.279776] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.284665] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.286429] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.286670] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.286704] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.286961] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.288107] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.288283] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.288309] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.291417] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.291765] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.292809] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.293212] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.293613] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.294034] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.294148] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.294168] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.294187] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.294474] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.294485] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.295973] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.297342] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.298061] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.298166] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.301688] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.301821] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.726882] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 13.897609] Low-power S0 idle used by default for system suspend <6>[ 13.950915] ACPI: EC: interrupt unblocked <6>[ 13.950926] ACPI: EC: event unblocked <6>[ 13.950961] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 13.950968] ACPI: EC: GPE=0x6e <6>[ 13.950974] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 13.950983] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 13.951590] iommu: Default domain type: Translated <6>[ 13.951590] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 13.956297] SCSI subsystem initialized <7>[ 13.957472] libata version 3.00 loaded. <6>[ 13.957619] ACPI: bus type USB registered <6>[ 13.957619] usbcore: registered new interface driver usbfs <6>[ 13.957619] usbcore: registered new interface driver hub <6>[ 13.957704] usbcore: registered new device driver usb <6>[ 13.958075] pps_core: LinuxPPS API ver. 1 registered <6>[ 13.958087] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 13.958144] PTP clock support registered <6>[ 13.959492] EDAC MC: Ver: 3.0.0 <6>[ 13.962378] efivars: Registered efivars operations <6>[ 13.965637] NetLabel: Initializing <6>[ 13.965647] NetLabel: domain hash size = 128 <6>[ 13.965657] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 13.965822] NetLabel: unlabeled traffic allowed by default <6>[ 13.965860] mctp: management component transport protocol core <6>[ 13.965873] NET: Registered PF_MCTP protocol family <6>[ 13.965974] PCI: Using ACPI for IRQ routing <7>[ 14.020972] PCI: pci_cache_line_size set to 64 bytes <6>[ 14.021217] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 14.021380] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 14.021404] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 14.021413] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 14.021420] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 14.021428] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 14.023262] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 14.023291] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 14.023307] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 14.023341] vgaarb: loaded <7>[ 14.027199] Monitor-Mwait will be used to enter C-1 state <7>[ 14.027222] Monitor-Mwait will be used to enter C-2 state <7>[ 14.027222] Monitor-Mwait will be used to enter C-3 state <6>[ 14.035581] clocksource: Switched to clocksource tsc-early <5>[ 14.040985] VFS: Disk quotas dquot_6.6.0 <6>[ 14.041048] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 14.043648] AppArmor: AppArmor Filesystem Enabled <6>[ 14.044087] pnp: PnP ACPI init <6>[ 14.046182] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 14.046209] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 14.049778] system 00:02: [io 0x06a4] has been reserved <6>[ 14.049801] system 00:02: [io 0x06a0] has been reserved <6>[ 14.101309] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 14.101334] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 14.101361] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 14.101381] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 14.101401] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 14.101425] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 14.101448] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 14.101468] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 14.109337] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 14.115820] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 14.116210] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 14.125120] pnp: PnP ACPI: found 8 devices <6>[ 14.141720] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 14.142621] NET: Registered PF_INET protocol family <6>[ 14.142930] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 14.146190] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 14.146512] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 14.146833] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 14.148070] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 14.150148] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 14.150816] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 14.152460] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 14.154133] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 14.154234] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 14.154252] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 14.154266] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 14.154335] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 14.154345] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 14.154354] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 14.154365] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 14.154397] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 14.154423] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 14.154445] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 14.154471] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 14.154517] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 14.154531] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 14.154544] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 14.154555] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 14.154571] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 14.154582] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 14.154594] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 14.154605] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 14.154621] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 14.154629] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 14.154641] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 14.154652] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 14.154668] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 14.154676] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 14.154687] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 14.154702] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 14.154754] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 14.154801] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 14.154809] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 14.154817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 14.154826] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 14.154835] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 14.154845] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 14.154852] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 14.154860] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 14.154871] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 14.154878] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 14.154886] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 14.154896] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 14.154904] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 14.154912] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 14.154922] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 14.154930] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 14.154938] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 14.156370] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 14.158568] PCI: CLS 0 bytes, default 64 <6>[ 14.158722] DMAR: No RMRR found <6>[ 14.158754] DMAR: No ATSR found <6>[ 14.158761] DMAR: dmar1: Using Queued invalidation <6>[ 14.158771] DMAR: dmar0: Using Queued invalidation <6>[ 14.158780] DMAR: dmar2: Using Queued invalidation <6>[ 14.160017] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 14.160133] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 14.160247] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 14.160337] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 14.164823] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 14.166982] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 14.167086] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 14.167182] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 14.167273] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 14.167392] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 14.167453] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 14.167514] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 14.167606] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 14.167712] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 14.167823] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 14.167886] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 14.168007] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 14.168068] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 14.168129] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 14.168199] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 14.168293] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 14.168393] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 14.168510] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 14.168636] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 14.168702] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 14.168775] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 14.168838] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 14.168929] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 14.169043] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 14.181089] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 14.181109] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 14.181117] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 14.187063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 14.187398] clocksource: Switched to clocksource tsc <6>[ 14.187798] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 14.195833] Initialise system trusted keyrings <5>[ 14.195927] Key type blacklist registered <6>[ 14.196499] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 14.208042] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 14.208192] ntfs3: Enabled Linux POSIX ACLs support <6>[ 14.208200] ntfs3: Read-only LZX/Xpress compression included <5>[ 14.209217] integrity: Platform Keyring initialized <5>[ 14.209250] integrity: Machine keyring initialized <6>[ 14.216342] xor: automatically using best checksumming function avx <5>[ 14.216355] Key type asymmetric registered <5>[ 14.216371] Asymmetric key parser 'x509' registered <6>[ 14.216510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 14.217199] io scheduler mq-deadline registered <6>[ 14.218911] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 14.220626] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 14.221241] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 14.222513] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 14.223041] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 14.224326] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 14.224857] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 14.226717] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 14.227249] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 14.228838] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 14.229430] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 14.231543] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 14.231796] ACPI: button: Lid Switch [LID0] <6>[ 14.232096] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 14.232316] ACPI: button: Sleep Button [SLPB] <6>[ 14.232569] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 14.233052] ACPI: button: Power Button [PWRB] <6>[ 14.406146] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 14.406167] ACPI: thermal: Thermal Zone [TZ00] (60 C) <6>[ 14.407675] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 14.408005] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 14.409075] ACPI: battery: Slot [BAT0] (battery present) <6>[ 14.431337] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 14.447997] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 14.462850] hpet_acpi_add: no address or irqs in _CRS <6>[ 14.463096] Linux agpgart interface v0.103 <6>[ 14.464114] ACPI: bus type drm_connector registered <7>[ 14.468862] initcall simpledrm_platform_driver_init blacklisted <6>[ 14.500196] loop: module loaded <6>[ 14.571679] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 14.707128] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 14.821058] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 14.933580] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 15.048932] Key type psk registered <6>[ 15.054046] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 15.055365] tun: Universal TUN/TAP device driver, 1.6 <6>[ 15.055616] nvme nvme0: pci function 0000:80:00.0 <6>[ 15.056422] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 15.056544] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 15.058536] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 15.060949] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 15.060979] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 15.061000] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 15.061430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 15.061452] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 15.061463] usb usb1: Product: xHCI Host Controller <6>[ 15.061470] usb usb1: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4168-7fe1b006b65af67bc+ xhci-hcd <6>[ 15.061482] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 15.062652] hub 1-0:1.0: USB hub found <6>[ 15.062744] hub 1-0:1.0: 1 port detected <6>[ 15.066556] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 15.066571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 15.066582] usb usb2: Product: xHCI Host Controller <6>[ 15.066589] usb usb2: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4168-7fe1b006b65af67bc+ xhci-hcd <6>[ 15.066601] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 15.067387] hub 2-0:1.0: USB hub found <6>[ 15.067430] hub 2-0:1.0: 3 ports detected <6>[ 15.091041] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 15.091092] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 15.091242] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 15.093526] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 15.095550] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 15.095578] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 15.095599] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 15.095881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 15.095896] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 15.095907] usb usb3: Product: xHCI Host Controller <6>[ 15.095914] usb usb3: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4168-7fe1b006b65af67bc+ xhci-hcd <6>[ 15.095926] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 15.096863] hub 3-0:1.0: USB hub found <6>[ 15.096923] hub 3-0:1.0: 8 ports detected <6>[ 15.099759] nvme0n1: p1 p2 <6>[ 15.126324] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 15.126338] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 15.126345] usb usb4: Product: xHCI Host Controller <6>[ 15.126349] usb usb4: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4168-7fe1b006b65af67bc+ xhci-hcd <6>[ 15.126356] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 15.127253] hub 4-0:1.0: USB hub found <6>[ 15.127285] hub 4-0:1.0: 2 ports detected <6>[ 15.131643] usbcore: registered new interface driver usb-storage <6>[ 15.132254] usbcore: registered new interface driver usbserial_generic <6>[ 15.132336] usbserial: USB Serial support registered for generic <6>[ 15.132386] usbcore: registered new interface driver ftdi_sio <6>[ 15.132410] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 15.132457] usbcore: registered new interface driver pl2303 <6>[ 15.132480] usbserial: USB Serial support registered for pl2303 <6>[ 15.132565] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 15.132571] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 15.844799] i8042: Can't read CTR while initializing i8042 <3>[ 15.844804] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 15.847966] mousedev: PS/2 mouse device common for all mice <6>[ 15.853315] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 15.855395] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 15.855619] rtc_cmos rtc_cmos: setting system clock to 2025-11-28T18:50:03 UTC (1764355803) <6>[ 15.855824] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 15.855883] i2c_dev: i2c /dev entries driver <6>[ 15.861545] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 15.861560] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 15.861573] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 15.861620] device-mapper: uevent: version 1.0.3 <6>[ 15.862055] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 15.862075] intel_pstate: Intel P-state driver initializing <6>[ 15.866268] Hybrid CPU capacity scaling enabled <6>[ 15.866715] processor cpu0: EM: created perf domain <6>[ 15.867070] processor cpu1: EM: created perf domain <6>[ 15.867414] processor cpu2: EM: created perf domain <6>[ 15.867778] processor cpu3: EM: created perf domain <6>[ 15.868147] processor cpu4: EM: created perf domain <6>[ 15.868525] processor cpu5: EM: created perf domain <6>[ 15.868926] processor cpu6: EM: created perf domain <6>[ 15.869325] processor cpu7: EM: created perf domain <6>[ 15.871328] intel_pstate: HWP enabled <6>[ 15.871342] sdhci: Secure Digital Host Controller Interface driver <6>[ 15.871353] sdhci: Copyright(c) Pierre Ossman <6>[ 15.871625] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 15.875527] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 15.876762] drop_monitor: Initializing network drop monitor service <6>[ 15.877052] NET: Registered PF_INET6 protocol family <6>[ 15.878842] Segment Routing with IPv6 <6>[ 15.878919] In-situ OAM (IOAM) with IPv6 <6>[ 15.878992] NET: Registered PF_PACKET protocol family <5>[ 15.879349] Key type dns_resolver registered <4>[ 15.887152] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 15.887980] microcode: Current revision: 0x00000124 <6>[ 15.889333] IPI shorthand broadcast: enabled <6>[ 15.907830] sched_clock: Marking stable (15898001226, 9733690)->(16024057152, -116322236) <6>[ 15.908685] registered taskstats version 1 <5>[ 15.910307] Loading compiled-in X.509 certificates <6>[ 15.954563] Demotion targets for Node 0: null <6>[ 15.954861] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 15.954865] kmemleak: Automatic memory scanning thread started <5>[ 15.955087] Key type .fscrypt registered <5>[ 15.955091] Key type fscrypt-provisioning registered <6>[ 15.957984] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 15.960495] Key type encrypted registered <6>[ 15.960503] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 15.960682] ima: No TPM chip found, activating TPM-bypass! <5>[ 15.960696] Loading compiled-in module X.509 certificates <5>[ 15.961419] Loaded X.509 cert 'Build time autogenerated kernel key: 5f1f05805778eb7f239fc8981625284e1d072925' <6>[ 15.961430] ima: Allocated hash algorithm: sha256 <6>[ 15.961474] ima: No architecture policies found <6>[ 15.961559] evm: Initialising EVM extended attributes: <6>[ 15.961564] evm: security.selinux <6>[ 15.961567] evm: security.SMACK64 <6>[ 15.961570] evm: security.SMACK64EXEC <6>[ 15.961573] evm: security.SMACK64TRANSMUTE <6>[ 15.961577] evm: security.SMACK64MMAP <6>[ 15.961580] evm: security.apparmor <6>[ 15.961583] evm: security.ima <6>[ 15.961586] evm: security.capability <6>[ 15.961589] evm: HMAC attrs: 0x1 <6>[ 15.963617] PM: Magic number: 1:833:848 <6>[ 15.963801] netconsole: network logging started <6>[ 15.964418] RAS: Correctable Errors collector initialized. <6>[ 15.964552] clk: Disabling unused clocks <6>[ 15.964562] PM: genpd: Disabling unused power domains <4>[ 15.965089] check access for rdinit=/init failed: -2, ignoring <6>[ 15.965096] md: Waiting for all devices to be available before autodetect <6>[ 15.965101] md: If you don't use raid, use raid=noautodetect <6>[ 15.965106] md: Autodetecting RAID arrays. <6>[ 15.965114] md: autorun ... <6>[ 15.965118] md: ... autorun DONE. <6>[ 16.008009] EXT4-fs (nvme0n1p2): mounted filesystem 7dfac1f5-10ea-4066-a63e-e14654e0601e ro with ordered data mode. Quota mode: none. <6>[ 16.008082] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 16.008730] devtmpfs: mounted <6>[ 16.025201] Freeing unused decrypted memory: 2036K <6>[ 16.026147] Freeing unused kernel image (initmem) memory: 5704K <6>[ 16.026170] Write protecting the kernel read-only data: 36864k <6>[ 16.026915] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 16.027277] Freeing unused kernel image (rodata/data gap) memory: 696K <6>[ 16.031763] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 16.031790] Run /sbin/init as init process <7>[ 16.031793] with arguments: <7>[ 16.031794] /sbin/init <7>[ 16.031795] with environment: <7>[ 16.031796] HOME=/ <7>[ 16.031797] TERM=linux <7>[ 16.078470] systemd[1]: Inserted module 'autofs4' <7>[ 16.101069] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 16.101104] systemd[1]: Detected architecture x86-64. <7>[ 16.102467] systemd[1]: Hostname set to . <7>[ 16.316796] systemd[1]: Queued start job for default target graphical.target. <7>[ 16.351413] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 16.353187] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 16.354658] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 16.354913] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 16.355547] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 16.355655] systemd[1]: Expecting device dev-disk-by\x2duuid-BB9D\x2d0E2E.device - /dev/disk/by-uuid/BB9D-0E2E... <7>[ 16.355745] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 16.355824] systemd[1]: Reached target slices.target - Slice Units. <7>[ 16.355892] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 16.355958] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 16.356030] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 16.356258] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 16.356629] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 16.356926] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 16.357229] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 16.357478] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 16.357673] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 16.357970] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 16.358279] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 16.358547] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 16.358723] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 16.359208] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 16.359500] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 16.362732] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 16.365328] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 16.367977] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 16.371028] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 16.377606] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 16.381188] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 16.384173] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 16.387699] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 16.390431] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 16.393324] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 16.396427] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 16.399542] systemd-journald[205]: Collecting audit messages is disabled. <7>[ 16.400247] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 16.405308] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 16.411255] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 16.415066] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 16.415340] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 16.417091] pstore: Using crash dump compression: deflate <6>[ 16.419300] pstore: Registered efi_pstore as persistent store backend <7>[ 16.419371] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 16.426440] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 16.426614] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 16.426719] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 16.431851] fuse: init (API version 7.45) <7>[ 16.432138] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 16.438627] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 16.576238] EXT4-fs (nvme0n1p2): re-mounted 7dfac1f5-10ea-4066-a63e-e14654e0601e r/w. <6>[ 16.603670] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:320602112k SS <7>[ 16.617624] systemd-journald[205]: Received client request to flush runtime journal. <7>[ 16.630723] systemd-journald[205]: /var/log/journal/d99f231fc73949389b52e126c183b290/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 16.630737] systemd-journald[205]: Rotating system journal. <4>[ 17.316797] nvme nvme0: using unchecked data buffer <6>[ 17.458552] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 17.482565] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 17.561198] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 17.581027] intel-hid INTC107B:00: platform supports 5 button array <6>[ 17.585433] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 17.631823] audit: type=1400 audit(1764355805.274:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=423 comm="apparmor_parser" <5>[ 17.632401] audit: type=1400 audit(1764355805.275:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=421 comm="apparmor_parser" <5>[ 17.633042] audit: type=1400 audit(1764355805.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=422 comm="apparmor_parser" <5>[ 17.634153] audit: type=1400 audit(1764355805.277:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=424 comm="apparmor_parser" <5>[ 17.636978] audit: type=1400 audit(1764355805.280:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=425 comm="apparmor_parser" <5>[ 17.639140] audit: type=1400 audit(1764355805.282:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=426 comm="apparmor_parser" <5>[ 17.641847] audit: type=1400 audit(1764355805.285:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=427 comm="apparmor_parser" <5>[ 17.644259] audit: type=1400 audit(1764355805.287:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=428 comm="apparmor_parser" <5>[ 17.645880] audit: type=1400 audit(1764355805.289:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=429 comm="apparmor_parser" <5>[ 17.647514] audit: type=1400 audit(1764355805.290:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=430 comm="apparmor_parser" <3>[ 17.696683] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 17.697114] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 17.799190] pci 0000:00:05.0: Setting to D3hot <6>[ 17.812642] pci 0000:00:0b.0: Setting to D3hot <6>[ 17.826950] intel_pmc_core INT33A1:00: initialized <6>[ 18.088237] ACPI: bus type thunderbolt registered <6>[ 18.095884] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 18.118821] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 18.118830] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 18.139723] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 18.145417] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 18.175284] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 18.205094] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 18.250920] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 18.255526] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 18.256050] intel_rapl_common: Found RAPL domain package <6>[ 18.256054] intel_rapl_common: Found RAPL domain dram <6>[ 18.266771] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 18.325565] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a5:0e:fc, XID 541, IRQ 175 <6>[ 18.325575] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 18.354559] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 18.357805] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 18.357816] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 18.357819] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 18.357821] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 18.357823] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 18.371093] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 18.371984] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.390269] block nvme0n1: No UUID available providing old NGUID <6>[ 18.629708] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 18.851562] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.866563] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 18.878490] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.892782] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 18.892792] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 18.892794] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 18.911568] loop0: detected capacity change from 0 to 8 <6>[ 19.013846] intel_rapl_common: Found RAPL domain package <6>[ 19.013852] intel_rapl_common: Found RAPL domain core <6>[ 19.013855] intel_rapl_common: Found RAPL domain dram <6>[ 19.013857] intel_rapl_common: Found RAPL domain psys <6>[ 19.081196] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.097464] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.110172] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.144821] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <4>[ 19.154646] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 19.192890] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 19.192923] 0x000000000000-0x000002000000 : "BIOS" <6>[ 19.241222] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.282870] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 19.397926] Consider using thermal netlink events interface <6>[ 19.440035] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 19.825741] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.890392] hid: raw HID events driver (C) Jiri Kosina <6>[ 19.897034] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 19.929555] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.932098] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.933235] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.933501] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.935364] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.935408] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.936283] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.937658] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.937771] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.938359] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.940657] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.945343] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.949151] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.950221] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.952718] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.955224] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.958315] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.958893] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.961178] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.962982] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.965561] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.966481] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.968369] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.033754] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.046693] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.049955] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.060317] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.062507] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.067216] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.072798] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.078625] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.084913] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.089420] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.094073] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.098744] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.104904] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.109559] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.114553] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.119865] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.127139] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.132109] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.139493] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.144407] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 21.626466] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 21.626514] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 21.626565] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 22.665841] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 22.665887] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 22.665924] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 24.647631] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 30.295003] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 30.299032] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 33.566419] systemd-journald[205]: /var/log/journal/d99f231fc73949389b52e126c183b290/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 53.411284] [IGT] xe_module_load: executing <4>[ 53.411333] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 53.418473] [IGT] xe_module_load: starting subtest load <5>[ 53.687330] Setting dangerous option force_probe - tainting kernel <6>[ 53.690259] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 53.691785] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 53.691796] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 53.691934] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 53.692048] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 53.693846] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 53.693996] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 53.694107] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 53.694222] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 53.694339] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 53.694439] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 53.694539] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 53.694636] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 53.694722] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 53.694843] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 53.694954] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 53.695074] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 53.695179] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 53.695283] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 53.695391] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 53.695507] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 53.695621] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 53.695735] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 53.695866] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 53.695985] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 53.696097] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.696204] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.696311] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 53.696419] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.696526] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.696637] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.696755] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 53.696866] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.696977] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.697081] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.697177] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 53.697272] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.697366] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.697459] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.697552] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 53.697645] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.697743] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.697843] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.697945] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 53.698044] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.698134] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.698223] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.698319] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 53.698748] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 53.698888] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 53.699020] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 53.699142] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 53.699251] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 53.699356] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 53.699451] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 53.699552] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 53.699642] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 53.699754] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 53.699853] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 53.699955] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 53.700051] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 53.700140] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 53.700228] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 53.700313] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 53.700399] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 53.700483] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 53.700570] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.700655] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.700753] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.700864] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 53.700976] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 53.701073] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.701162] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.701248] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.701338] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 53.701449] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.701595] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 53.701732] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.702072] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 53.702254] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 53.702397] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 53.702510] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 53.702626] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.702778] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 53.702902] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 53.702918] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 53.703063] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 53.703182] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 53.703293] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 53.703497] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 53.703905] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 53.705170] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 53.705305] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 53.705410] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 53.705534] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 53.705639] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 53.705734] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 53.705844] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 53.705950] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 53.706056] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 53.706144] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 53.706225] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 53.706303] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 53.706381] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 53.706457] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 53.707295] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 53.707411] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 53.707522] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 53.707629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 53.707732] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 53.707856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 53.707972] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 53.708087] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 53.708215] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.708330] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 53.708456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.708580] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 53.708687] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.708812] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 53.708939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 53.709061] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 53.709182] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.709286] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 53.709391] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.709494] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 53.709612] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.709734] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 53.709894] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 53.710017] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 53.710139] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.710257] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 53.710374] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.710491] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 53.710606] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.710719] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 53.712267] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 53.715371] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.715531] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 53.715687] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 53.715904] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:210:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 53.716132] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:210:DDI A/PHY A] <7>[ 53.716342] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 53.716507] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 53.716652] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 53.716920] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 53.717061] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 53.717197] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 53.717331] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 53.717463] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 53.717595] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 53.717755] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:210:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 53.717992] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.718120] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.718246] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.718370] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.718496] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.718777] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.719176] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 53.720624] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 53.720928] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 53.721858] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 53.759774] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 53.771776] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 53.795764] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 53.819759] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 53.831760] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 53.891778] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.239791] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.239801] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.239803] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.239804] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.239807] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.239809] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.239810] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 54.239814] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.239816] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 54.239818] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.239853] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.239854] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.239855] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.239868] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.239997] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.251764] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:211:eDP-1] Performing OUI wait (0 ms) <7>[ 54.263767] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:211:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 54.263890] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:211:eDP-1] DRRS type: seamless <7>[ 54.264021] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:211:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 54.264156] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:211:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 54.264324] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 54.264434] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 54.264531] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 54.264627] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 54.264722] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 54.264861] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 54.265073] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:219:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 54.265245] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.265377] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:219:DDI TC1/PHY TC1] <7>[ 54.265733] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:231:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 54.265885] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.266013] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:231:DDI TC2/PHY TC2] <7>[ 54.266266] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:239:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 54.266403] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.266529] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:239:DDI TC3/PHY TC3] <7>[ 54.266995] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] hw state readout: enabled <7>[ 54.267121] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] hw state readout: disabled <7>[ 54.267243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] hw state readout: disabled <7>[ 54.267341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 54.267439] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 54.267534] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 54.267629] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 54.267722] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 54.267829] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 54.267931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] hw state readout: disabled, pipe B <7>[ 54.268032] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] hw state readout: disabled, pipe B <7>[ 54.268135] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] hw state readout: disabled, pipe B <7>[ 54.268232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] hw state readout: disabled, pipe B <7>[ 54.268324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] hw state readout: disabled, pipe B <7>[ 54.268416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] hw state readout: disabled, pipe B <7>[ 54.268506] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] hw state readout: disabled, pipe C <7>[ 54.268595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] hw state readout: disabled, pipe C <7>[ 54.268683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] hw state readout: disabled, pipe C <7>[ 54.268781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] hw state readout: disabled, pipe C <7>[ 54.268876] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] hw state readout: disabled, pipe C <7>[ 54.268969] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] hw state readout: disabled, pipe C <7>[ 54.269895] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 54.270021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:210:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 54.270117] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.270206] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 54.270287] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.270367] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:222:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.270446] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:223:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.270528] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.270613] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:231:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 54.270692] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.270781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:234:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.270866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.270953] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.271045] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:239:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 54.271134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:241:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.271219] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:242:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.271302] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:243:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.272153] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 54.272255] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 54.272358] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.272461] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 54.272564] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.272666] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.272775] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.272881] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.273010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:211:eDP-1] hw state readout: enabled <7>[ 54.273112] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:220:DP-1] hw state readout: disabled <7>[ 54.273197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:232:DP-2] hw state readout: disabled <7>[ 54.273281] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:240:DP-3] hw state readout: disabled <7>[ 54.273450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 54.273539] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 54.273626] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 54.273711] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 54.273811] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 54.273901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 54.273990] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] min_cdclk 173855 kHz <7>[ 54.274077] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] min_cdclk 0 kHz <7>[ 54.274160] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] min_cdclk 0 kHz <7>[ 54.274239] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] min_cdclk 0 kHz <7>[ 54.274316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] min_cdclk 0 kHz <7>[ 54.274393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] min_cdclk 0 kHz <7>[ 54.274469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] min_cdclk 0 kHz <7>[ 54.274545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] min_cdclk 0 kHz <7>[ 54.274621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] min_cdclk 0 kHz <7>[ 54.274696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] min_cdclk 0 kHz <7>[ 54.274782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] min_cdclk 0 kHz <7>[ 54.274864] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] min_cdclk 0 kHz <7>[ 54.274945] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] min_cdclk 0 kHz <7>[ 54.275026] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] min_cdclk 0 kHz <7>[ 54.275108] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] min_cdclk 0 kHz <7>[ 54.275337] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:89:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 54.275424] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 54.275508] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:207:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 54.275591] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 54.275700] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 54.275825] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 54.275974] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 54.276094] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 54.276331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [setup_hw_state] <7>[ 54.276451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.276571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 54.276680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.276799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.276915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.277027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.277136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 54.277240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.277347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.277451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.277553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 54.277654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.277763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 54.277871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.277977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 54.278080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 54.278175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.278269] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.278362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.278455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.278548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.278641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.278731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.278842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.278940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.279035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.279131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.279220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.279306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 54.279393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.279483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.279571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 54.279658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.279750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.279852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.279956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.280060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.280155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.280249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 54.280341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.280433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.280523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.280609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.280695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.280794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.280889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.280982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.281075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.281162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.281246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.281329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.281413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [setup_hw_state] <7>[ 54.281497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [setup_hw_state] <7>[ 54.281580] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 54.281863] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:89:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 54.281975] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:89:pipe A] <6>[ 54.295549] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 54.299118] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 54.299239] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 54.299338] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 54.299424] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 54.299502] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 54.299577] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 54.299651] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 54.299723] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 54.299813] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 54.299890] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 54.299966] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 54.300040] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 54.300112] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 54.300179] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 54.300245] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 54.300356] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 54.310877] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 54.311679] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 54.311902] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7>[ 54.311992] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7>[ 54.312078] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 54.312161] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 54.312235] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 54.953027] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 54.953030] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 54.953031] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 54.953157] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 54.953277] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 54.953388] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 54.953489] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 54.953611] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 54.953751] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 54.953892] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 54.953999] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 54.954138] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 54.954241] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 54.955436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 54.955548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 54.955663] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 54.955773] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 54.955873] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 54.955972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 54.956063] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 54.956153] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 54.956242] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 54.956329] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.956417] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.956505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.956592] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.956677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.956768] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.956855] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.956941] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.957027] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.957112] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.957195] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.957276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.957357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.957437] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.957515] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.957593] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.957670] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 54.957757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 54.957841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 54.957925] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 54.958009] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 54.958090] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 54.958171] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 54.958254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 54.958338] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 54.958421] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 54.958507] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 54.958593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 54.958682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 54.958778] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 54.958866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 54.959213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 54.959296] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 54.959374] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 54.959450] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 54.959763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 54.959839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 54.959916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 54.959991] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 54.960286] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 54.960364] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 54.960445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 54.960526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 54.960606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 54.960683] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 54.960763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 54.961217] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 54.961344] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 54.961425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 54.961504] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 54.961583] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 54.961661] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 54.961744] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 54.961825] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 54.961902] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 54.961980] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 54.962054] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 54.962126] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 54.962198] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 54.962266] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 54.962333] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 54.962422] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 54.962579] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 54.963617] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.966650] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 54.981753] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 54.992921] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 54.993259] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 54.994330] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 54.994454] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 54.994539] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 54.994617] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 54.994694] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 54.994783] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 54.994856] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 54.994948] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 54.995030] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 54.997292] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 54.997413] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 54.997505] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 55.000790] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 55.000907] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 55.004619] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 55.009583] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 55.009778] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.009945] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 55.010104] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.010249] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 55.010389] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.010521] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.010650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.010790] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.010917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.011040] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.011160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.011273] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.011390] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 55.012885] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 55.015121] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 55.016219] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 55.016329] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 55.016470] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 55.038017] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.038544] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.038882] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 55.039129] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 55.039355] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 55.039573] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 55.039844] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 55.040059] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 55.040062] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 55.040065] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 55.040067] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 55.040069] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 55.040071] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 55.040073] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 55.040075] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 55.040078] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 55.040080] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 55.040195] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 55.040566] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 55.041000] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 55.043035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 55.043328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 55.043620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 55.043925] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 55.044193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 55.044497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 55.044745] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 55.044987] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 55.045205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 55.045420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 55.045654] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 55.045886] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 55.046095] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.046311] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.046506] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.046691] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.046894] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.047102] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.047292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.047493] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.047680] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.047892] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.048063] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.048217] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.048363] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.048509] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.048649] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.048818] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.048957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 55.049104] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 55.049250] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 55.049816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 55.049949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 55.050086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 55.050601] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 55.050744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 55.050878] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 55.051556] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 55.051722] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 55.051862] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.051979] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 55.052091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.052199] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 55.052302] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.052404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.052505] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.052605] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.052701] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.052806] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.052899] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.052987] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.053073] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 55.053177] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 55.053298] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 55.055017] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.072092] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 55.093483] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.093994] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.095569] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 55.095887] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.099559] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 55.099961] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.102929] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 55.103264] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.147312] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 55.148558] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.149087] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.149525] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.149959] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.150946] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 55.151280] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 55.151600] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 55.153510] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 0: start 0x90008 <7>[ 55.154007] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 1: start 0x90108 <7>[ 55.154427] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 2: start 0x90208 <7>[ 55.154834] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 3: start 0x90308 <7>[ 55.155183] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 4: start 0x903c8 <7>[ 55.155515] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 0: start 0x98008 <7>[ 55.155859] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 1: start 0x98108 <7>[ 55.156178] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 2: start 0x98208 <7>[ 55.156494] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 3: start 0x98308 <7>[ 55.156821] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 4: start 0x983c8 <7>[ 55.157135] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 0: start 0x52008 <7>[ 55.157445] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 1: start 0x52108 <7>[ 55.157785] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 2: start 0x52208 <7>[ 55.158095] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 3: start 0x52308 <7>[ 55.158403] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 4: start 0x523c8 <7>[ 55.159199] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 55.159538] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 55.159885] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 55.160226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [fastset] <7>[ 55.160623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [fastset] <7>[ 55.162583] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 55.162885] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 55.170434] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe B] <7>[ 55.170893] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:207:pipe C] <7>[ 55.184619] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:211:eDP-1] adding connector to sysfs <7>[ 55.190514] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:211:eDP-1] backlight device intel_backlight registered <7>[ 55.190865] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 55.191135] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Panel prepare <7>[ 55.191878] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 55.193761] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:211:eDP-1] generating connector hotplug event <7>[ 55.193863] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:220:DP-1] adding connector to sysfs <7>[ 55.194476] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 55.195475] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:220:DP-1] generating connector hotplug event <7>[ 55.195533] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:232:DP-2] adding connector to sysfs <7>[ 55.196174] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 55.197322] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:232:DP-2] generating connector hotplug event <7>[ 55.197376] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:240:DP-3] adding connector to sysfs <7>[ 55.198180] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 55.199401] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:240:DP-3] generating connector hotplug event <6>[ 55.199458] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 55.199516] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 55.216007] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 55.222079] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 55.224663] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 55.224936] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 55.225319] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.225327] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 55.227204] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.227257] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 55.227699] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.227700] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.228438] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 55.228596] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:148:pipe B] not active, skipping <7>[ 55.228588] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:220:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.228719] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:207:pipe C] not active, skipping <7>[ 55.228736] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 55.228845] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 55.228904] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.229043] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:232:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.229215] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.229172] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 55.229328] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.229467] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:240:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.229596] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 55.229924] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 55.229939] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 55.231610] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.232301] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.232447] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.232581] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.232963] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.232973] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.232975] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.232977] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.232980] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.232982] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.232985] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 55.232992] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.232993] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 55.232996] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.233035] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 55.233171] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.233293] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 55.234273] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 55.234275] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] status updated from unknown to connected <7>[ 55.234487] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 55.235068] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.235072] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.235073] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.235128] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 55.235135] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.235139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.235143] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 55.235147] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 55.235372] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.235379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 55.235380] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 55.235385] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 55.235388] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 55.235559] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 55.235562] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 55.235565] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 55.235716] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 55.235718] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 55.235721] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 55.235723] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 55.235725] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 55.236310] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.236330] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 55.236333] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 55.236344] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.236451] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 55.236465] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 55.243498] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da6000 <6>[ 55.245865] fbcon: xedrmfb (fb0) is primary device <7>[ 55.247940] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 55.248357] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 55.248540] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 55.248719] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 55.248937] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A] <7>[ 55.249096] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 55.249249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dpll_hw_state <7>[ 55.249395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 55.249538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.249681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 55.249830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 55.249970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 55.250108] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 55.250245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.250380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 55.250516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.250650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.250795] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.250931] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 55.251072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 55.251205] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.251332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 55.251459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 55.251585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 55.251712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.251856] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 55.251983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.252107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.252231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.252358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 55.252485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 55.252611] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 55.252746] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <6>[ 55.252852] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 55.252880] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7>[ 55.253013] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0 <7>[ 55.253190] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 55.253325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 55.253459] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 55.253533] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 55.253569] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 55.253659] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 55.253757] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.253867] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.253979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.254090] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.254200] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.254308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.254414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.254534] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.254659] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.254814] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.254936] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255053] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255165] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.255274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255381] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.255724] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.255943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.256066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:89:pipe A] data rate 1390840 num active planes 1 <7>[ 55.256234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 55.256393] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 55.256537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 55.256677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 55.256824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 55.257020] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:89:pipe A] allocated DPLL 0 <7>[ 55.257165] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 55.257302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [modeset] <7>[ 55.257444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 55.257588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 55.257731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 55.257879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 55.258010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 55.258140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 55.258274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 55.258403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 55.258529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 55.258654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 55.258784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 55.258909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 55.259032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 55.259159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 55.259293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 55.259425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 55.259547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 55.259670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 55.259804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 55.259927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 55.260052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 55.260185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 55.260315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 55.260440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.260560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.260680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.260811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.260933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.261058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 55.261185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 55.261299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 55.261412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 55.261524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 55.261634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.261750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 55.261860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 55.261969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 55.262078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.262197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 55.262312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.262422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.262531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.262654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 55.262787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 55.262909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 55.263029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.263143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.263266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.263386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.263510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.263624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.263733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.263857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.263964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.264070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.264175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 55.264279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:212] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 55.264380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 55.264483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 55.264585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 55.264686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 55.264797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 55.264912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 55.265029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 55.271018] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 55.271184] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 55.276115] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 55.278193] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.278334] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.278449] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.278560] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.278669] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.278789] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.278930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.279064] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.279167] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.279271] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.279376] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.279480] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.279585] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.279688] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.279836] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.279967] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.280085] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.280183] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.280281] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.280380] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.280480] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.280578] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.280676] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.280788] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.280917] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.281044] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.281154] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.281250] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.281348] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.281445] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.281541] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.281641] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.281745] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.281873] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.282000] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.282107] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 55.288560] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 55.290530] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 55.291545] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 55.292601] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 55.472959] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 0 <7>[ 55.474298] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 55.494600] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power off <7>[ 55.494985] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 55.495090] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 55.495334] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 55.495559] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 55.547578] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 55.547982] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 55.555794] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.556253] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.556290] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7>[ 55.556695] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.557241] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 55.557636] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 55.558609] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 55.559180] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:210:DDI A/PHY A] <7>[ 55.559472] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DDI TC1/PHY TC1] <7>[ 55.559762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST A] <7>[ 55.560040] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST B] <7>[ 55.560313] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST C] <7>[ 55.560582] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DDI TC2/PHY TC2] <7>[ 55.560862] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DP-MST A] <7>[ 55.561171] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:234:DP-MST B] <7>[ 55.561430] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST C] <7>[ 55.561683] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DDI TC3/PHY TC3] <7>[ 55.561957] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:241:DP-MST A] <7>[ 55.562222] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:242:DP-MST B] <7>[ 55.562485] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:243:DP-MST C] <7>[ 55.562812] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 55.563874] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7>[ 55.564249] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 55.565913] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power on <7>[ 55.566231] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7>[ 55.585670] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.586026] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 55.586355] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 55.586714] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.683142] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 56.064941] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 56.095803] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.096327] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 56.096866] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 56.132893] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 56.133349] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 56.133752] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 56.134334] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 56.273674] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.273676] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.273689] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.302924] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.303356] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 56.303722] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 56.305767] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 56.306977] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 56.307735] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 56.308835] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 56.310039] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 56.311135] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 56.311520] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 56.313066] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 56.313441] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 56.314289] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 56.314824] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 56.315223] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 56.315671] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 192000 <7>[ 56.331836] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 56.333952] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:211:eDP-1] <7>[ 56.334393] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:89:pipe A] <7>[ 56.335959] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 56.337428] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 56.338305] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 56.338734] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:211:eDP-1] set backlight level = 13892 <6>[ 56.338929] Console: switching to colour frame buffer device 180x56 <6>[ 56.372975] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 56.373065] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 56.374009] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 56.374532] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 56.375116] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 56.375581] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 56.376120] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 56.376551] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 56.377011] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 56.377469] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 56.377882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 56.378284] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 56.378640] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 56.379061] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 56.379450] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 56.379866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 56.380213] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 56.380557] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 56.380919] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 56.381265] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 56.381652] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 56.381705] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 56.381674] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 56.382029] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 56.382340] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 56.382849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 56.382889] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 56.383716] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 56.384100] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 56.384849] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 56.385316] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 56.385727] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 56.386106] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 56.386579] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 56.387549] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.388066] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 56.388940] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 56.389230] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 56.389490] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 56.390733] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 56.390763] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.390768] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.390770] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 56.390774] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 56.390778] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.390782] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 56.390806] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.390809] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 56.390813] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.390872] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 56.391128] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 56.391327] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 56.392394] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <5>[ 56.392507] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.392514] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.392516] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.392754] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 56.392783] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 56.392790] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.392796] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 56.392804] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 56.393489] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 56.394160] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 56.394185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 56.394197] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 56.394762] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 56.395175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 56.395192] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 56.395203] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 56.395656] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 56.396039] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 56.396053] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 56.396067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 56.396076] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 56.396086] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 56.396991] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 56.397097] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 56.397108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 56.397246] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 56.401452] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 56.401780] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 56.416469] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 56.448934] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 56.449511] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 56.450037] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.465044] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 56.465077] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 56.465722] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 56.467603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 56.467665] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 56.469029] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 56.469800] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 56.470230] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 56.470699] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 56.471588] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 56.471607] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.471614] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.471618] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 56.471628] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 56.471636] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.471642] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 56.471666] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.471673] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 56.471682] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.471798] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 56.472233] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 56.472633] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 56.473930] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.473939] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.473944] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.474141] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 56.474166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 56.474178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.474190] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 56.474201] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 56.474795] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 56.474810] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 56.474819] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 56.475323] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 56.475334] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 56.475344] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 56.475882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 56.475892] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 56.475901] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 56.475910] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 56.475919] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 56.476227] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 56.476277] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 56.476286] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 56.476385] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 56.479300] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 56.479657] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 56.483111] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 56.498788] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 56.499131] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 56.499405] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.502821] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 56.503710] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 56.516577] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 56.516923] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 56.517456] [IGT] xe_module_load: exiting, ret=0 <7>[ 56.532792] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 56.533212] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 56.533587] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.537072] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 56.538939] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 56.566812] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 56.567287] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 56.568963] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.489063] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.489094] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.489357] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.026061] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD off <7>[ 59.026559] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067