Result: 10 Warning(s)
boot-20250925-0337 dmesg-20250925-0337
| Detail | Value |
|---|---|
| Duration | 26.67 seconds |
| Igt-Version |
IGT-Version: 2.1-g162a06a82 (x86_64) (Linux: 6.17.0-rc7-lgci-xe-xe-3827-690ed0728a0e31e6b+ x86_64) |
| Out |
Using IGT_SRANDOM=1758771542 for randomisation Starting subtest: many-reload Opened device: /dev/dri/card0 Subtest many-reload: SUCCESS (26.667s) |
| Err |
Starting subtest: many-reload Subtest many-reload: SUCCESS (26.667s) |
| Dmesg |
<6> [124.453709] [IGT] xe_module_load: executing
<6> [124.466408] [IGT] xe_module_load: starting subtest many-reload
<7> [124.466591] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [124.466722] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [124.466827] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [124.467067] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [124.467192] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [124.467324] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [124.467454] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [124.467608] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [124.467732] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [124.467888] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [124.468678] Deleting MTD partitions on "xe.nvm.768":
<6> [124.468681] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [124.469097] Deleting xe.nvm.768.GSC MTD partition
<6> [124.469430] Deleting xe.nvm.768.OptionROM MTD partition
<6> [124.469767] Deleting xe.nvm.768.DAM MTD partition
<7> [124.470703] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [124.470861] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [124.471320] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [124.471476] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [124.471620] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [124.472109] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [124.472261] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [124.486143] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [124.488061] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [124.488150] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [124.496151] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [124.501287] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [124.564597] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [124.570714] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [124.589612] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [124.631207] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [124.633118] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881248f4100 (0)
<7> [124.638199] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff8881248f4100 (0)
<7> [124.639007] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [125.212551] Setting dangerous option force_probe - tainting kernel
<6> [125.215479] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [125.216524] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [125.216719] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [125.216727] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [125.216837] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [125.216929] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [125.217022] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [125.218492] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [125.218519] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [125.218521] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [125.218523] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [125.218524] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [125.259494] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [125.259703] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [125.260127] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [125.260238] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [125.260342] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [125.260435] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [125.260536] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [125.260647] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [125.260744] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [125.260834] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [125.260924] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [125.261024] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [125.261113] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [125.261198] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [125.261285] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [125.261840] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [125.275191] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [125.275304] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [125.275407] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [125.275514] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [125.275616] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [125.275716] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [125.275812] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [125.275905] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [125.275993] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [125.276094] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [125.276188] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [125.276281] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [125.276371] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [125.276463] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [125.276567] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [125.276655] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [125.276743] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [125.276831] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [125.276922] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [125.277019] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [125.277114] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [125.277207] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [125.277296] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [125.277384] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [125.277476] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [125.277563] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [125.277648] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [125.277733] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [125.277825] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [125.277919] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [125.278039] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [125.278183] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [125.278314] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [125.278493] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [125.278687] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [125.278793] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [125.278895] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [125.279016] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [125.279121] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [125.279241] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [125.279340] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [125.279435] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [125.279883] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [125.280192] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [125.280314] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [125.280421] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [125.280527] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [125.280621] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [125.280712] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [125.280799] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [125.280884] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [125.280968] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [125.281051] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [125.281132] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [125.281214] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [125.281295] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [125.281375] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [125.281453] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [125.281539] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [125.281617] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [125.281694] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [125.282182] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [125.282328] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [125.282442] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [125.282549] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [125.282645] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [125.282738] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [125.282846] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [125.282937] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [125.283031] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [125.283128] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [125.283220] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [125.283311] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [125.283400] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [125.283500] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [125.283598] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [125.283686] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [125.283774] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [125.283862] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [125.283951] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [125.284039] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [125.284127] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [125.284216] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [125.284309] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [125.284399] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [125.284501] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [125.284593] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [125.284689] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [125.284779] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [125.284868] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [125.284957] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [125.287120] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [125.291252] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [125.291383] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [125.291502] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [125.292130] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [125.292751] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [125.293246] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [125.293360] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [125.293826] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [125.294304] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [125.294625] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [125.294730] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [125.294913] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<6> [125.294996] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [125.295006] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [125.295177] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [125.295300] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [125.295719] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [125.295904] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [125.296378] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [125.296548] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [125.296685] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [125.296815] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [125.296905] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [125.297003] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [125.297099] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [125.297195] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [125.297299] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [125.297439] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [125.297631] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [125.297770] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [125.297904] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [125.298276] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [125.298418] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [125.298595] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [125.298723] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [125.298827] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [125.298922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [125.299013] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [125.299101] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [125.299188] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [125.299274] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [125.299366] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [125.299458] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [125.299572] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [125.299663] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [125.299746] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [125.299829] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [125.299913] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [125.299996] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [125.300077] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [125.300157] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [125.300239] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [125.300317] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [125.300393] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [125.300486] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [125.300586] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [125.300669] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [125.300751] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [125.300831] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [125.300909] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [125.300991] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [125.301074] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [125.301165] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [125.301247] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [125.301328] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [125.301409] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [125.301506] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [125.301610] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [125.301701] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [125.301795] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [125.301883] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [125.301970] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [125.302055] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [125.302141] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [125.302226] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [125.302312] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [125.302399] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [125.302504] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [125.302640] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [125.302771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [125.302900] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [125.303035] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [125.303173] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [125.303303] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [125.303433] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [125.303572] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [125.303666] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [125.303753] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [125.303845] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [125.303934] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [125.304019] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [125.304101] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [125.304182] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [125.304268] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [125.304368] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [125.304463] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [125.304713] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [125.304810] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [125.304925] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [125.305029] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [125.305129] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [125.305330] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [125.305659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [125.305795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [125.305908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [125.306011] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [125.308076] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [125.310029] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [125.310130] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [125.310214] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [125.310287] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [125.310358] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [125.310427] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [125.310508] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [125.310578] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [125.310645] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [125.310710] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [125.310777] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [125.310842] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [125.310907] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [125.310971] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [125.311034] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [125.311143] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [125.312484] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [125.317479] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [125.318903] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [125.319671] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [125.320085] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [125.320237] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [125.320376] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [125.320561] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [125.320722] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [125.418327] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [125.418330] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [125.418503] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [125.418626] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [125.418723] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [125.418812] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [125.418936] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [125.419051] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [125.419187] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [125.419270] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [125.419356] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [125.419437] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [125.419646] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [125.419738] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [125.419820] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [125.419896] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [125.421003] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [125.421102] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [125.421191] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [125.421271] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [125.421348] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [125.421425] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [125.421517] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [125.421628] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [125.421710] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [125.421785] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [125.421858] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [125.421928] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [125.421996] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [125.422062] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [125.422129] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [125.422197] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [125.422266] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [125.422336] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [125.422402] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [125.422476] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [125.422591] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [125.422658] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [125.422726] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [125.422796] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [125.422865] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [125.422931] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [125.423010] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [125.423086] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [125.423157] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [125.423228] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [125.423299] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [125.423372] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [125.423444] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [125.423541] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [125.423665] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [125.423738] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [125.423814] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [125.423891] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [125.423969] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [125.424045] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [125.424119] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [125.424190] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [125.424391] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [125.424512] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [125.424610] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [125.424689] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [125.424842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [125.424918] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [125.424991] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [125.425062] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [125.425191] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [125.425264] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [125.425335] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [125.425411] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [125.425496] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [125.425580] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [125.425659] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [125.425811] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [125.425884] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [125.425954] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [125.426029] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [125.426104] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [125.426173] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [125.426241] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [125.426595] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [125.429046] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [125.429138] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [125.429218] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [125.429291] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [125.429361] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [125.429430] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [125.429522] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [125.429599] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [125.429671] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [125.429733] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [125.429794] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [125.429857] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [125.429918] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [125.429978] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [125.430064] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [125.430218] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [125.430687] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [125.431792] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [125.432806] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [125.453475] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [125.454486] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [125.459475] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [125.460844] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [125.461108] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [125.461750] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [125.461839] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [125.461910] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [125.461978] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [125.462051] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [125.462122] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [125.462187] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [125.462254] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [125.462323] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [125.464200] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [125.464277] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [125.464348] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [125.466245] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [125.466332] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [125.469545] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [125.470634] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [125.472760] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [125.472856] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [125.472938] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [125.473014] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [125.473088] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [125.473164] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [125.473236] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [125.473305] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [125.473371] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [125.473436] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [125.473525] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [125.473590] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [125.473656] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [125.473722] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [125.474271] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [125.474793] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [125.474910] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [125.476399] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [125.485479] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [125.485821] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [125.485936] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [125.486032] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [125.486125] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [125.486212] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [125.486298] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [125.486384] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [125.486385] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [125.486387] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [125.486388] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [125.486389] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [125.486390] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [125.486391] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [125.486393] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [125.486396] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [125.486564] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [125.486716] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [125.486857] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [125.486987] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [125.488022] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [125.488116] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [125.488206] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [125.488293] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [125.488375] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [125.488458] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [125.488553] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [125.488638] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [125.488726] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [125.488812] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [125.488891] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [125.488967] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [125.489040] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [125.489113] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [125.489186] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [125.489259] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [125.489337] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [125.489414] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [125.489495] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [125.489568] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [125.489640] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [125.489710] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [125.489781] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [125.489850] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [125.489918] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [125.489987] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [125.490074] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [125.490161] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [125.490377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [125.490463] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [125.490559] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [125.490760] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [125.490841] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [125.490919] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [125.491141] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [125.491224] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [125.491304] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [125.491718] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [125.494856] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [125.494951] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [125.495034] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [125.495113] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [125.495187] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [125.495264] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [125.495339] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [125.495411] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [125.495490] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [125.495558] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [125.495625] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [125.495691] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [125.495756] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [125.495822] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [125.495913] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [125.496013] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [125.496649] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [125.515888] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [125.516980] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [125.526478] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [125.526803] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [125.527262] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [125.527373] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [125.528809] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [125.528914] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [125.536303] Creating 4 MTD partitions on "xe.nvm.768":
<5> [125.536316] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [125.542875] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [125.550951] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [125.555162] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [125.561505] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [125.561694] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [125.562075] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [125.562144] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [125.562298] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [125.562407] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [125.562502] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [125.563525] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [125.563818] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [125.564125] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [125.564366] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [125.564517] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [125.564617] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [125.564708] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [125.564836] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [125.565065] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [125.565216] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [125.565385] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [125.565524] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [125.565613] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [125.565698] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [125.565781] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [125.565867] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [125.565953] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [125.566063] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [125.566189] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [125.566289] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [125.566572] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<6> [125.566662] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [125.566687] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [125.566791] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [125.566926] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [125.567040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [125.567140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [125.567236] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [125.567637] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [125.567970] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [125.568134] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [125.568277] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [125.568414] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [125.572514] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [125.573532] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [125.575929] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [125.576017] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [125.576745] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [125.576821] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [125.577596] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [125.578694] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [125.578765] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [125.579797] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [125.579920] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [125.580513] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [125.580573] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [125.581023] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [125.581652] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [125.581696] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [125.581976] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [125.582004] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [125.582856] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [125.582983] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [125.583881] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [125.585057] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [125.585423] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [125.585668] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [125.585770] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [125.585862] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [125.585950] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [125.586385] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [125.589242] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.589367] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [125.593512] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.593613] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [125.593757] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [125.598003] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [125.598045] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [125.599274] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [125.602027] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [125.602060] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [125.603260] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [125.605750] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [125.613944] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [125.615004] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [125.618962] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [125.618997] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [125.619166] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff888121245ec0 (2)
<7> [125.621184] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121245ec0 (1)
<7> [125.621206] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [125.621484] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [125.621660] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [125.621757] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.621865] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [125.622716] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888121245ec0 (2)
<7> [125.622729] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [125.622779] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [125.622932] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [125.623193] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [125.623299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [125.623303] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.623416] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [125.624737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [125.624742] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [125.624896] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.625047] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [125.629223] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.629393] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [125.633562] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.633723] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [125.637873] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.638046] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [125.638064] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [125.638087] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [125.642688] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [125.642698] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [125.642704] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [125.646858] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [125.646867] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [125.646872] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [125.659765] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.669479] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [125.669484] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [125.669992] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [125.700764] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.706755] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [125.739586] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.772966] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.773929] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [125.774004] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [125.806512] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.839962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.840012] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [125.840076] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [125.840592] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [125.874968] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.908964] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.910446] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [125.910545] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [125.944543] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.978966] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [125.979580] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [126.013726] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [126.047437] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [126.047521] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [126.047590] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [126.047684] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [126.047764] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121245ec0 (1)
<7> [126.049072] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [126.054562] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [126.055558] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [126.056574] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [126.057082] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [126.057564] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [126.058012] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [126.058039] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [126.058057] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [126.058775] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [126.059218] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [126.060243] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [126.060590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [126.060601] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.060901] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [126.062299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [126.062305] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [126.062567] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [126.062579] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [126.062589] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [126.066838] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [126.066849] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [126.066859] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [126.071187] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [126.071215] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [126.071229] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [126.075739] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [126.075760] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [126.075772] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [126.075783] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [126.075792] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [126.075802] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [126.075811] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [126.075821] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [126.075830] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [126.075925] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [126.075954] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [126.076033] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [126.076059] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [126.078095] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [126.077948] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [126.078588] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [126.079263] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [126.079111] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [126.079298] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [126.079612] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [126.080032] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [126.080449] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [126.080892] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [126.081269] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [126.081657] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [126.081992] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [126.082321] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [126.082664] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [126.082991] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [126.083280] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [126.083597] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [126.083862] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [126.084018] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [126.084039] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [126.084050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [126.084128] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [126.084406] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [126.084687] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [126.084930] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [126.085160] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [126.085382] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [126.085659] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [126.086035] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [126.086289] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [126.086543] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [126.086758] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [126.088415] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [126.088422] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [126.088428] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [126.090565] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [126.090623] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [126.091146] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [126.093266] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [126.093307] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [126.094150] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [126.095540] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [126.100535] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [126.101291] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [126.101842] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [126.102183] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [126.102414] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [126.102517] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [126.102522] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [126.102526] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [126.102883] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [126.102991] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [126.103321] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [126.103431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [126.103434] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.103547] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<6> [126.104023] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [126.104491] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [126.104684] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [126.104721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [126.104723] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [126.104724] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [126.104816] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [126.104820] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [126.104823] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [126.104969] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [126.105090] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [126.107613] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [126.108936] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [126.108953] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [126.108962] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [126.113204] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [126.113213] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [126.113219] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [126.117380] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [126.117385] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [126.117392] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [126.117395] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [126.117396] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [126.117398] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [126.117400] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [126.117402] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [126.117403] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [126.117524] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [126.117539] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [126.117563] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [126.117574] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [126.117577] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [126.118281] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [126.165445] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [126.166091] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [126.166640] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [126.167230] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [126.167790] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [127.119370] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [127.120151] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [127.120783] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [127.121439] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [127.122159] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [127.122741] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [127.123992] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [127.124223] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [127.124356] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [127.124515] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [127.125326] Deleting MTD partitions on "xe.nvm.768":
<6> [127.125329] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [127.126163] Deleting xe.nvm.768.GSC MTD partition
<6> [127.127366] Deleting xe.nvm.768.OptionROM MTD partition
<6> [127.128323] Deleting xe.nvm.768.DAM MTD partition
<7> [127.132262] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [127.133350] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [127.135536] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [127.135867] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [127.136202] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [127.137225] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [127.137543] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [127.174227] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [127.175898] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [127.176155] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [127.183482] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [127.184398] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [127.267024] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [127.270706] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [127.280632] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [127.318197] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [127.320096] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121245ec0 (0)
<7> [127.324236] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff888121245ec0 (0)
<7> [127.325268] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [127.871498] Setting dangerous option force_probe - tainting kernel
<6> [127.874095] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [127.875285] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [127.875491] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [127.875499] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [127.875614] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [127.875703] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [127.875797] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [127.877168] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [127.877195] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [127.877197] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [127.877199] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [127.877200] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [127.922895] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [127.923139] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [127.923266] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [127.923372] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [127.923483] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [127.923584] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [127.923689] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [127.923794] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [127.923885] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [127.923972] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [127.924059] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [127.924155] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [127.924244] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [127.924328] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [127.924414] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [127.925111] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [127.938512] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [127.938618] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [127.938709] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [127.938797] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [127.938887] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [127.938972] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [127.939059] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [127.939150] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [127.939235] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [127.939326] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [127.939412] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [127.939506] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [127.939606] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [127.939700] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [127.939786] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [127.939866] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [127.939945] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [127.940025] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [127.940109] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [127.940190] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [127.940271] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [127.940352] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [127.940432] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [127.940529] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [127.940623] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [127.940718] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [127.940809] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [127.940897] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [127.940987] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [127.941086] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [127.941213] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [127.941362] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [127.941505] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [127.941699] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [127.941879] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [127.941980] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [127.942076] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [127.942196] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [127.942300] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [127.942415] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [127.942531] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [127.942643] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [127.943093] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [127.943715] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [127.943867] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [127.943980] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [127.944015] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [127.944166] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [127.944175] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [127.944330] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [127.944329] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [127.944496] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [127.944498] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [127.944651] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [127.944660] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [127.944789] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [127.944800] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [127.944927] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [127.944951] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [127.945068] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [127.945100] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [127.945204] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [127.945243] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [127.945341] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [127.945383] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [127.945482] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [127.945543] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [127.945636] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [127.945706] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [127.945778] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [127.945863] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [127.945919] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [127.946009] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [127.946059] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [127.946153] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [127.946198] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [127.946306] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [127.946347] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [127.946477] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [127.946510] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [127.946639] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [127.946783] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [127.946955] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [127.947096] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [127.947227] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [127.947368] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [127.947505] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [127.947635] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [127.947765] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [127.947892] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [127.948017] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [127.958139] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [127.958666] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [127.961653] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [127.961784] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [127.961896] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [127.962013] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [127.962148] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [127.962614] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [127.962732] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [127.962959] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [127.963080] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [127.963373] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [127.963521] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [127.963713] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [127.963810] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [127.963982] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [127.964104] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [127.964392] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [127.964508] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [127.964804] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [127.964943] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [127.965075] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [127.965203] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [127.965301] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [127.965392] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [127.965489] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [127.965579] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [127.965673] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [127.965769] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [127.965862] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [127.965952] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [127.966047] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [127.966140] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [127.966229] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [127.966317] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [127.966405] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [127.966501] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [127.966587] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [127.966672] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [127.966757] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [127.966842] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [127.966928] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [127.967013] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [127.967098] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [127.967184] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [127.967269] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [127.967355] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [127.967443] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [127.967560] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [127.967647] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [127.967732] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [127.967815] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [127.967905] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [127.967992] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [127.968078] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [127.968162] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [127.968247] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [127.968332] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [127.968415] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [127.968510] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [127.968596] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [127.968680] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [127.968764] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [127.968861] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [127.968953] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [127.969043] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [127.969133] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [127.969231] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [127.969322] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [127.969411] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [127.969504] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [127.969589] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [127.969672] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [127.969756] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [127.969839] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [127.969926] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [127.970016] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [127.970102] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [127.970185] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [127.970268] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [127.970350] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [127.970432] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [127.970523] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [127.970612] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [127.970700] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [127.970786] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [127.970870] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [127.970955] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [127.971038] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [127.971125] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [127.971213] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [127.971300] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [127.971385] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [127.971478] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [127.971567] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [127.971670] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [127.971766] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [127.971858] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [127.971952] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [127.972066] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [127.972169] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [127.972266] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [127.972395] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [127.972543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [127.972645] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [127.972740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [127.972832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [127.974533] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [127.976497] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [127.976602] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [127.976686] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [127.976763] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [127.976836] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [127.976908] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [127.976977] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [127.977046] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [127.977115] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [127.977184] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [127.977248] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [127.977314] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [127.977379] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [127.977443] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [127.977523] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [127.977635] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [127.979129] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [127.983478] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [127.984854] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [127.985256] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [127.985864] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [127.986107] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [127.986192] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [127.986273] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [127.986350] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [127.986425] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [128.074440] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [128.074442] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [128.074635] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [128.074740] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [128.074834] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [128.074918] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [128.075040] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [128.075151] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [128.075276] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [128.075349] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [128.075424] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [128.075505] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [128.075672] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [128.075748] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [128.075825] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [128.075898] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [128.076956] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [128.077035] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [128.077116] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [128.077199] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [128.077280] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [128.077356] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [128.077430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [128.077534] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [128.077617] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [128.077694] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [128.077767] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [128.077837] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [128.077907] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [128.077975] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [128.078043] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [128.078110] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [128.078177] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [128.078248] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [128.078318] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [128.078387] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [128.078454] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [128.078533] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [128.078606] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [128.078676] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [128.078741] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [128.078803] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [128.078880] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [128.078959] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [128.079033] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [128.079105] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [128.079173] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [128.079240] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [128.079308] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [128.079379] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [128.079446] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [128.079528] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [128.079617] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [128.079697] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [128.079775] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [128.079850] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [128.079924] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [128.079995] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [128.080138] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [128.080212] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [128.080282] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [128.080349] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [128.080485] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [128.080562] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [128.080635] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [128.080701] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [128.080823] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [128.080890] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [128.080956] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [128.081020] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [128.081085] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [128.081147] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [128.081209] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [128.081344] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [128.081417] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [128.081493] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [128.081570] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [128.081644] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [128.081709] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [128.081773] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [128.082096] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [128.084578] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [128.084665] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [128.084740] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [128.084811] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [128.084879] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [128.084948] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [128.085014] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [128.085078] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [128.085139] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [128.085199] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [128.085258] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [128.085315] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [128.085372] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [128.085429] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [128.085544] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [128.085703] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [128.086089] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [128.087125] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [128.088109] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [128.107783] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [128.108811] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [128.113475] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [128.114849] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [128.115124] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [128.115763] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [128.115865] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [128.115941] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [128.116011] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [128.116084] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [128.116155] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [128.116225] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [128.116296] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [128.116369] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [128.118246] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [128.118337] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [128.118416] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [128.120433] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [128.120526] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [128.124600] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [128.125766] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [128.127865] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [128.127962] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [128.128047] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [128.128128] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [128.128204] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [128.128278] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [128.128352] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [128.128424] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [128.128515] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [128.128596] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [128.128669] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [128.128739] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [128.128810] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [128.128878] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [128.129494] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [128.129982] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [128.130103] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [128.131487] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [128.141477] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [128.141804] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [128.141912] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [128.141999] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [128.142081] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [128.142163] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [128.142245] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [128.142326] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [128.142327] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [128.142328] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [128.142329] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [128.142330] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [128.142331] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [128.142333] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [128.142334] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [128.142337] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [128.142492] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [128.142642] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [128.142768] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [128.142885] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [128.143874] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [128.143971] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [128.144063] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [128.144150] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [128.144230] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [128.144311] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [128.144388] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [128.144476] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [128.144561] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [128.144642] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [128.144722] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [128.144802] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [128.144879] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [128.144955] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [128.145035] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [128.145114] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [128.145189] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [128.145262] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [128.145333] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [128.145404] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [128.145478] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [128.145549] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [128.145627] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [128.145704] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [128.145778] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [128.145849] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [128.145936] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [128.146020] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [128.146232] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [128.146316] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [128.146395] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [128.146605] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [128.146694] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [128.146778] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [128.146991] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [128.147071] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [128.147150] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [128.147583] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [128.150480] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [128.150579] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [128.150666] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [128.150747] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [128.150824] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [128.150899] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [128.150971] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [128.151041] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [128.151108] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [128.151173] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [128.151239] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [128.151305] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [128.151370] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [128.151435] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [128.151538] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [128.151639] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [128.152278] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [128.171356] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [128.172444] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [128.182477] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [128.182758] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [128.183239] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [128.183336] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [128.184622] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [128.184717] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [128.191477] Creating 4 MTD partitions on "xe.nvm.768":
<5> [128.191491] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [128.197522] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [128.203065] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [128.208283] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [128.217532] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [128.217720] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [128.218154] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [128.218227] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [128.218373] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [128.218565] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [128.218678] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [128.220368] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [128.220555] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [128.220724] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [128.220890] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [128.221052] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [128.221216] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<6> [128.221236] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [128.221381] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [128.221572] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [128.221733] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [128.221891] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [128.222049] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [128.222207] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [128.222364] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [128.222552] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [128.222712] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [128.223060] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [128.223385] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [128.223563] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [128.223720] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [128.223874] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [128.224172] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [128.224300] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [128.224408] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [128.224560] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [128.224666] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [128.224765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [128.224859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [128.225288] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [128.225462] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [128.225676] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [128.225818] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [128.227476] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [128.228804] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [128.231815] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [128.232006] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [128.233444] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [128.233769] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [128.235863] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [128.237119] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [128.237167] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [128.237530] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [128.237565] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [128.237900] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [128.237956] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [128.238455] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [128.239781] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [128.239846] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [128.240303] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [128.240344] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [128.240675] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [128.240805] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [128.241131] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [128.242585] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [128.243032] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [128.243143] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [128.243242] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [128.243337] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [128.243432] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [128.243728] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [128.246759] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.246875] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [128.251001] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.251125] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [128.251274] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [128.255517] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.255554] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.256742] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [128.259517] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.259544] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.261804] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [128.264257] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [128.273928] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [128.274889] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [128.278917] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.278942] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.279077] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff888121245ec0 (2)
<7> [128.280987] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121245ec0 (1)
<7> [128.281004] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [128.281191] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [128.281359] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [128.281522] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.281632] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [128.282014] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [128.282129] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [128.282647] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888121245ec0 (2)
<7> [128.282659] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [128.282710] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [128.282859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [128.282864] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.282995] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [128.284234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [128.284237] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [128.284377] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.284515] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [128.288698] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.288827] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [128.293059] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.293170] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [128.297295] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [128.297675] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [128.297679] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [128.297687] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [128.301857] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [128.301870] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [128.301877] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [128.306025] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [128.306037] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [128.306046] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [128.320161] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.325485] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [128.332486] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [128.332865] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [128.361048] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.365452] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [128.398494] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.431263] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.432099] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.432184] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.464964] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.497965] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.498013] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [128.498068] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [128.498564] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [128.531964] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.565966] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.567761] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.567825] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.600964] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.634962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.635565] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [128.669739] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.702964] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [128.703007] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [128.703056] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [128.703144] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [128.703221] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121245ec0 (1)
<7> [128.704555] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [128.710399] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [128.711546] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [128.712556] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [128.713064] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [128.713532] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [128.713929] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [128.713954] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [128.713971] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [128.714588] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [128.714971] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [128.715997] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [128.716305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [128.716315] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.716639] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [128.718054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [128.718060] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [128.718296] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [128.718309] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [128.718317] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [128.722559] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [128.722568] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [128.722576] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [128.726875] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [128.726885] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [128.726894] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [128.731196] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [128.731205] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [128.731211] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [128.731216] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [128.731220] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [128.731224] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [128.731229] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [128.731232] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [128.731236] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [128.731288] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [128.731304] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [128.731346] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [128.731359] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [128.732513] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [128.732412] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [128.732695] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [128.732997] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [128.732917] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [128.733012] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [128.733118] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [128.733309] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [128.733503] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [128.733686] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [128.733880] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [128.734055] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [128.734226] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [128.734390] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [128.734562] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [128.734717] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [128.734870] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [128.735017] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [128.735167] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [128.735323] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [128.735464] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [128.735617] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [128.735761] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [128.735894] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [128.736020] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [128.736277] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [128.736450] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [128.736626] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [128.736779] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [128.736926] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [128.737321] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [128.737330] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [128.737334] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [128.741511] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [128.741516] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [128.741520] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [128.743515] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.743539] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.744274] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<6> [128.745875] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [128.745949] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [128.745969] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [128.746368] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [128.746701] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<6> [128.746734] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [128.746782] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [128.747139] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [128.747356] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [128.747877] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [128.751826] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [128.752838] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [128.753446] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [128.754082] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [128.754270] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [128.754453] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [128.754671] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [128.754682] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [128.754690] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [128.755217] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [128.755394] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [128.755885] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [128.756003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [128.756008] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.756121] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [128.757314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [128.757318] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [128.757433] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [128.757439] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [128.757444] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [128.761580] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [128.761584] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [128.761588] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [128.765691] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [128.765695] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [128.765699] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [128.769822] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [128.769826] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [128.769832] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [128.769834] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [128.769836] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [128.769838] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [128.769839] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [128.769841] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [128.769843] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [128.769956] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [128.769970] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [128.769994] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [128.770005] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [128.770007] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [128.770058] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [128.820644] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [128.822274] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.822866] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.823369] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.823931] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [129.771333] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [129.771946] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [129.772504] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.773118] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.773822] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [129.774332] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [129.775623] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [129.776098] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [129.776218] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [129.776364] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [129.777235] Deleting MTD partitions on "xe.nvm.768":
<6> [129.777238] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [129.778012] Deleting xe.nvm.768.GSC MTD partition
<6> [129.780822] Deleting xe.nvm.768.OptionROM MTD partition
<6> [129.783474] Deleting xe.nvm.768.DAM MTD partition
<7> [129.784982] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [129.785208] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [129.786528] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [129.791758] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [129.796577] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [129.815768] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [129.817097] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [129.850001] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [129.851714] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [129.851843] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [129.862745] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [129.865950] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [129.947443] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [129.951229] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [129.956668] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [130.021402] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [130.023846] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121245ec0 (0)
<7> [130.026780] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff888121245ec0 (0)
<7> [130.026927] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [130.574972] Setting dangerous option force_probe - tainting kernel
<6> [130.577691] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [130.578795] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [130.578993] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [130.579001] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [130.579116] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [130.579208] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [130.579306] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [130.580701] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [130.580727] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [130.580729] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [130.580731] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [130.580732] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [130.624857] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [130.625096] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [130.625214] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [130.625317] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [130.625419] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [130.625519] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [130.625610] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [130.625711] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [130.625802] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [130.625890] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [130.625976] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [130.626071] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [130.626157] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [130.626243] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [130.626331] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [130.627125] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [130.640501] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [130.640602] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [130.640696] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [130.640785] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [130.640874] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [130.640959] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [130.641046] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [130.641136] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [130.641221] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [130.641314] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [130.641400] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [130.641490] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [130.641579] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [130.641669] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [130.641752] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [130.641831] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [130.641911] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [130.641991] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [130.642074] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [130.642153] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [130.642243] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [130.642327] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [130.642406] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [130.642498] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [130.642587] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [130.642673] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [130.642751] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [130.642828] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [130.642905] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [130.642988] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [130.643097] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [130.643234] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [130.643354] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [130.643529] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [130.643709] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [130.643800] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.643889] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [130.644007] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [130.644105] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [130.644215] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [130.644305] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [130.644394] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [130.644819] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [130.645295] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [130.645393] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [130.645492] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [130.645596] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [130.645685] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [130.645718] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [130.645768] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [130.645844] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [130.645857] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [130.645942] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [130.645944] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [130.646031] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [130.646032] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [130.646112] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [130.646119] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [130.646192] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [130.646202] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [130.646270] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [130.646284] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [130.646346] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [130.646365] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [130.646421] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [130.646447] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [130.646510] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [130.646553] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [130.646593] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [130.646650] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [130.646676] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [130.646742] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [130.646756] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [130.646823] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [130.646830] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [130.646903] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [130.646907] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [130.646983] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [130.646983] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [130.647061] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [130.647062] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [130.647134] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [130.647141] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [130.647223] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [130.647301] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [130.647378] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [130.647458] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [130.647557] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [130.647648] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [130.647732] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [130.647821] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [130.650192] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [130.654112] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [130.654233] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [130.654339] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [130.654943] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [130.655583] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [130.656141] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [130.656250] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [130.656688] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [130.657166] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [130.657453] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [130.657572] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [130.657771] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [130.657869] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<6> [130.657944] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [130.658064] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [130.658199] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [130.658539] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [130.658647] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [130.658985] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [130.659132] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [130.659268] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [130.659400] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [130.659505] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [130.659597] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [130.659693] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [130.659789] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [130.659883] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [130.659973] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [130.660064] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [130.660153] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [130.660244] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [130.660332] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [130.660418] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [130.660547] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [130.660637] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [130.660727] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [130.660822] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [130.660913] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [130.661004] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [130.661095] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [130.661185] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [130.661271] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [130.661360] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [130.661446] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [130.661582] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [130.661690] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [130.661783] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [130.661869] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [130.661963] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [130.662053] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [130.662138] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [130.662225] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [130.662324] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [130.662410] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [130.662504] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [130.662591] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [130.662678] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [130.662765] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [130.662849] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [130.662934] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [130.663030] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [130.663184] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [130.663298] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [130.663394] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [130.663495] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [130.663586] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [130.663674] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [130.663761] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [130.663854] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [130.663945] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [130.664030] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [130.664116] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [130.664202] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [130.664288] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [130.664372] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [130.664455] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [130.664549] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [130.664629] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [130.664713] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [130.664807] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [130.664890] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [130.664974] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [130.665064] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [130.665152] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [130.665236] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [130.665321] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [130.665405] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [130.665496] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [130.665576] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [130.665657] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [130.665739] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [130.665821] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [130.665910] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [130.666001] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [130.666102] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [130.666195] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [130.666283] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [130.666370] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [130.666490] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [130.666597] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [130.666698] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [130.666821] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [130.666947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [130.667040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [130.667128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [130.667214] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [130.668833] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [130.670860] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [130.670966] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [130.671051] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [130.671128] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [130.671199] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [130.671271] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [130.671340] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [130.671408] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [130.671484] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [130.671551] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [130.671617] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [130.671683] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [130.671749] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [130.671813] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [130.671879] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [130.671991] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [130.673481] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [130.678479] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [130.679217] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [130.679618] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [130.680247] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [130.680519] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [130.680614] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [130.680696] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [130.680772] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [130.680848] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [130.767749] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [130.767751] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [130.767881] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [130.767980] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [130.768074] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [130.768159] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [130.768273] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [130.768385] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [130.768521] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [130.768632] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [130.768740] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [130.768813] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [130.768939] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [130.769009] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [130.769083] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [130.769153] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [130.770214] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [130.770306] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [130.770395] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [130.770486] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [130.770574] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [130.770675] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [130.770766] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [130.770847] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [130.770925] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [130.770998] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [130.771070] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [130.771141] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [130.771210] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [130.771278] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [130.771352] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [130.771425] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [130.771505] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [130.771603] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [130.771690] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [130.771756] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [130.771820] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [130.771885] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [130.771949] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [130.772014] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [130.772077] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [130.772140] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [130.772217] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [130.772292] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [130.772362] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [130.772434] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [130.772531] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [130.772626] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [130.772709] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [130.772786] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [130.772858] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [130.772927] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [130.772995] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [130.773064] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [130.773137] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [130.773209] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [130.773281] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [130.773349] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [130.773493] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [130.773598] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [130.773690] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [130.773760] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [130.773900] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [130.773970] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [130.774038] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [130.774104] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [130.774229] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [130.774304] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [130.774375] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [130.774443] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [130.774530] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [130.774629] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [130.774710] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [130.774862] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [130.774933] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [130.775007] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [130.775081] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [130.775152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [130.775220] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [130.775287] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [130.775667] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [130.778156] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [130.778241] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [130.778315] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [130.778382] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [130.778445] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [130.778525] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [130.778617] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [130.778679] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [130.778738] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [130.778795] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [130.778853] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [130.778911] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [130.778968] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [130.779025] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [130.779106] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [130.779254] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [130.779719] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [130.780713] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [130.781711] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [130.801309] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [130.802389] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [130.806493] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [130.809152] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [130.809431] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [130.810045] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [130.810151] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [130.810237] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [130.810314] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [130.810391] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [130.810476] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [130.810565] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [130.810639] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [130.810716] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [130.812691] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [130.812820] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [130.812935] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [130.815271] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [130.815380] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [130.818840] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [130.820647] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [130.823333] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [130.823431] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [130.823528] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [130.823611] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [130.823685] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [130.823755] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [130.823823] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [130.823891] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [130.823957] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [130.824021] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [130.824085] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [130.824148] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [130.824215] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [130.824286] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [130.824874] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [130.825364] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [130.825501] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [130.827015] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [130.836486] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [130.836960] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [130.837162] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [130.837348] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [130.837551] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [130.837790] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [130.837946] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [130.838098] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [130.838101] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [130.838103] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [130.838105] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [130.838108] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [130.838110] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [130.838112] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [130.838115] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [130.838119] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [130.838414] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [130.838838] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [130.839188] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [130.839494] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [130.841858] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [130.842102] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [130.842371] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [130.842678] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [130.842941] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [130.843178] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [130.843402] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [130.843680] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [130.843996] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [130.844271] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [130.844557] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [130.844835] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [130.845089] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [130.845345] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [130.845615] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [130.845892] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [130.846143] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [130.846373] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [130.846629] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [130.846929] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [130.847127] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [130.847321] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [130.847535] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [130.847782] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [130.847977] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [130.848169] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [130.848394] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [130.848638] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [130.849560] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [130.849825] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [130.850068] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [130.850549] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [130.850776] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [130.850987] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [130.851486] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [130.851704] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [130.851913] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [130.853038] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [130.857244] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [130.857332] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [130.857411] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [130.857494] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [130.857576] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [130.857651] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [130.857721] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [130.857789] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [130.857857] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [130.857922] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [130.857987] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [130.858053] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [130.858118] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [130.858182] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [130.858271] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [130.858368] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [130.859016] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [130.880501] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [130.881490] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [130.891476] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [130.891806] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [130.892327] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [130.892436] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [130.893804] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [130.893901] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [130.900617] Creating 4 MTD partitions on "xe.nvm.768":
<5> [130.900631] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [130.908425] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [130.914947] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [130.921088] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [130.928873] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [130.929053] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [130.929349] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [130.929401] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [130.929538] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [130.929643] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [130.929731] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [130.930328] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [130.930448] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [130.930664] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [130.930765] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [130.930859] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [130.930950] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [130.931048] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [130.931141] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [130.931231] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [130.931317] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [130.931401] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [130.931515] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [130.931638] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [130.931734] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [130.931825] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [130.931911] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [130.931998] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [130.932082] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<6> [130.932132] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [130.932168] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [130.932254] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [130.932538] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [130.932664] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [130.932782] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [130.932982] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [130.933115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [130.933221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [130.933318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [130.933752] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [130.933922] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [130.934070] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [130.934214] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [130.938870] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [130.939993] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [130.942330] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [130.942877] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [130.943377] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [130.943423] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [130.943998] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [130.944729] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [130.944770] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [130.945093] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [130.945129] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [130.945446] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [130.945504] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [130.945916] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [130.946555] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [130.946617] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [130.946965] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [130.946993] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [130.947464] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [130.947648] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [130.948105] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [130.949559] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [130.949918] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [130.950026] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [130.950120] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [130.950209] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [130.950295] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [130.950500] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [130.953723] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.953835] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [130.957965] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.958072] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [130.958212] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [130.962188] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [130.962217] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [130.963338] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [130.965952] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [130.965977] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [130.966845] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [130.969151] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [130.977372] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [130.978304] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [130.982123] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [130.982145] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [130.982257] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff888127c76fe0 (2)
<7> [130.984121] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888127c76fe0 (1)
<7> [130.984137] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [130.984291] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [130.984425] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [130.984568] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.984716] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [130.985576] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888127c76fe0 (2)
<7> [130.985589] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [130.985639] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [130.985791] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [130.986047] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [130.986166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [130.986171] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.986294] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [130.987522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [130.987525] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [130.987632] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.987737] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [130.991857] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.991965] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [130.996500] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.996623] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [131.002478] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [131.002816] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [131.002822] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [131.002831] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [131.007013] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [131.007021] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [131.007025] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [131.011162] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [131.011170] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [131.011174] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [131.021982] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.037484] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [131.037484] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [131.038155] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [131.057722] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.073226] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [131.095109] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.129524] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.130441] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [131.130540] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [131.164246] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.198055] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.198102] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [131.198162] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [131.198686] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [131.232970] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.266443] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.268262] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [131.268331] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [131.301967] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.335964] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.336587] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [131.369968] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.403970] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [131.404018] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [131.404075] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [131.404167] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [131.404245] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888127c76fe0 (1)
<7> [131.405624] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [131.411414] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [131.412562] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [131.413743] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [131.414252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [131.414727] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [131.415179] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [131.415203] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [131.415218] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [131.415887] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [131.416252] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [131.417286] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [131.417636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [131.417647] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.417928] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [131.419314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [131.419321] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [131.419554] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [131.419566] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [131.419574] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [131.423832] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [131.423842] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [131.423850] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [131.428110] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [131.428120] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [131.428128] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [131.432388] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [131.432398] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [131.432404] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [131.432409] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [131.432413] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [131.432417] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [131.432421] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [131.432425] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [131.432428] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [131.432501] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [131.432519] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [131.432568] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [131.432588] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [131.433747] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [131.433667] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [131.433930] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [131.434238] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [131.434148] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [131.434252] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [131.434358] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [131.434591] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [131.434786] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [131.434956] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [131.435116] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [131.435271] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [131.435431] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [131.435620] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [131.435808] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [131.435967] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [131.436114] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [131.436253] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [131.436391] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [131.436538] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [131.436706] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [131.436849] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [131.436979] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [131.437104] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [131.437222] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [131.437364] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [131.437591] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [131.437756] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [131.437907] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [131.438054] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [131.438551] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [131.438559] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [131.438564] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [131.442752] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [131.442766] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [131.442774] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [131.445321] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [131.445386] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [131.445961] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [131.448083] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [131.448134] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [131.449010] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [131.450541] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [131.455972] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [131.456811] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [131.457699] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [131.458062] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [131.458262] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [131.458460] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [131.458489] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [131.458500] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [131.459152] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [131.459382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<6> [131.459996] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [131.459952] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [131.460163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [131.460168] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.460351] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [131.460488] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [131.460806] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [131.460855] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [131.461173] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [131.461363] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [131.461617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [131.461621] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [131.461770] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [131.461777] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [131.461782] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [131.464776] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [131.465954] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [131.465964] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [131.465974] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [131.470138] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [131.470147] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [131.470154] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [131.474304] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [131.474313] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [131.474321] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [131.474324] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [131.474328] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [131.474331] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [131.474334] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [131.474337] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [131.474340] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [131.474454] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [131.474477] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [131.474505] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [131.474519] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [131.474522] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [131.477453] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [131.517509] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [131.518114] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.518709] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.519283] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.519818] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [132.478716] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [132.479308] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [132.479925] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.480608] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.481273] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [132.481868] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [132.483207] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [132.483520] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [132.483653] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [132.483805] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [132.484725] Deleting MTD partitions on "xe.nvm.768":
<6> [132.484728] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [132.485291] Deleting xe.nvm.768.GSC MTD partition
<6> [132.486329] Deleting xe.nvm.768.OptionROM MTD partition
<6> [132.487765] Deleting xe.nvm.768.DAM MTD partition
<7> [132.492102] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [132.492305] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [132.492983] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [132.493220] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [132.493410] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [132.494548] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [132.494946] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [132.526165] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [132.528268] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [132.528590] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [132.546137] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [132.549857] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [132.628552] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [132.630375] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [132.634619] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [132.689234] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [132.691132] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888127c76fe0 (0)
<7> [132.695656] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff888127c76fe0 (0)
<7> [132.696045] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [133.225485] Setting dangerous option force_probe - tainting kernel
<6> [133.228073] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [133.229235] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [133.229423] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [133.229431] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [133.229560] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [133.229657] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [133.229758] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [133.231136] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [133.231163] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [133.231165] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [133.231167] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [133.231168] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [133.271675] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [133.271897] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [133.272033] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [133.272152] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [133.272270] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [133.272373] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [133.272484] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [133.272595] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [133.272696] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [133.272793] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [133.272895] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [133.273004] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [133.273103] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [133.273196] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [133.273291] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [133.274198] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [133.287569] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [133.287685] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [133.287791] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [133.287893] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [133.287992] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [133.288091] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [133.288190] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [133.288286] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [133.288379] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [133.288489] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [133.288586] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [133.288693] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [133.288793] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [133.288892] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [133.288989] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [133.289082] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [133.289183] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [133.289279] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [133.289375] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [133.289476] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [133.289572] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [133.289665] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [133.289757] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.289850] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [133.289948] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.290045] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [133.290137] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.290228] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [133.290320] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [133.290414] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [133.290547] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [133.290703] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [133.290840] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [133.291019] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [133.291197] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [133.291300] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.291401] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [133.291535] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [133.291646] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [133.291769] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [133.291880] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [133.291988] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [133.292481] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [133.292801] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [133.292926] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [133.293042] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [133.293150] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [133.293253] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [133.293347] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [133.293437] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [133.293533] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [133.293620] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [133.293706] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [133.293792] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [133.293878] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [133.293964] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [133.294049] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [133.294133] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [133.294219] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [133.294304] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [133.294385] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [133.294911] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [133.295063] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [133.295174] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [133.295279] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [133.295379] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [133.295484] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [133.295602] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [133.295704] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [133.295800] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [133.295898] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [133.295997] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [133.296127] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [133.296256] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [133.296360] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [133.296488] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [133.296592] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [133.296685] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [133.296780] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [133.296888] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [133.296982] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [133.297081] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [133.297196] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [133.297295] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [133.297385] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [133.297488] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [133.297599] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [133.297702] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [133.297800] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [133.297914] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [133.298006] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [133.299200] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [133.304295] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [133.304425] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [133.304546] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [133.305170] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [133.305791] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [133.306257] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [133.306366] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [133.306870] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [133.307349] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [133.307667] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [133.307768] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [133.307952] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [133.308051] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<6> [133.308101] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [133.308220] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [133.308342] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [133.308648] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [133.308748] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [133.309054] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [133.309201] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [133.309332] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [133.309460] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [133.309574] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [133.309672] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [133.309762] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [133.309851] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [133.309937] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [133.310023] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [133.310111] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [133.310198] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [133.310284] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [133.310367] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [133.310451] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [133.310551] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [133.310645] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [133.310737] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [133.310826] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [133.310913] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [133.310999] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [133.311085] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [133.311172] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [133.311259] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [133.311346] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [133.311435] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [133.311633] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [133.311733] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [133.311832] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [133.311983] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [133.312111] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [133.312246] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [133.312377] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [133.312522] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [133.312662] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [133.312799] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [133.312927] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [133.313035] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [133.313145] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [133.313327] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [133.313533] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [133.313684] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [133.313831] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [133.313977] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [133.314372] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [133.314509] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [133.314615] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [133.314713] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [133.314804] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [133.314893] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [133.314981] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [133.315066] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [133.315151] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [133.315236] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [133.315321] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [133.315406] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [133.315517] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [133.315655] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [133.315760] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [133.315846] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [133.315931] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [133.316015] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [133.316099] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [133.316183] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [133.316265] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [133.316353] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [133.316443] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [133.316560] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [133.316645] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [133.316730] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [133.316816] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [133.316901] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [133.316986] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [133.317078] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [133.317170] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [133.317265] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.317368] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.317463] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.317567] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [133.317657] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [133.317772] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [133.317878] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [133.317981] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [133.318103] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [133.318238] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [133.318339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [133.318435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [133.318541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [133.320292] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [133.322182] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [133.322284] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [133.322369] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [133.322444] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [133.322530] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [133.322599] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [133.322666] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [133.322733] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [133.322799] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [133.322864] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [133.322931] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [133.322999] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [133.323067] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [133.323132] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [133.323198] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [133.323310] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [133.324808] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [133.329484] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [133.330902] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [133.331640] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [133.332003] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [133.332142] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [133.332259] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [133.332371] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [133.332492] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [133.419325] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [133.419327] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [133.419489] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [133.419627] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [133.419725] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [133.419810] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [133.419923] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [133.420032] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [133.420153] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [133.420229] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [133.420306] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [133.420381] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [133.420529] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [133.420618] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [133.420703] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [133.420777] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [133.421832] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [133.421912] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [133.421996] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [133.422077] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [133.422155] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [133.422230] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [133.422304] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [133.422380] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [133.422455] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [133.422542] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [133.422618] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [133.422695] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [133.422767] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [133.422835] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [133.422906] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [133.422978] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [133.423047] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [133.423114] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [133.423179] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [133.423244] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [133.423309] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [133.423373] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [133.423436] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [133.423514] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [133.423585] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [133.423653] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [133.423732] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [133.423811] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [133.423886] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [133.423960] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [133.424028] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [133.424095] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [133.424169] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [133.424248] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [133.424319] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [133.424389] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [133.424458] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [133.424544] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [133.424622] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [133.424698] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [133.424773] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [133.424843] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [133.424978] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [133.425046] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [133.425112] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [133.425177] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [133.425310] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [133.425389] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [133.425463] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [133.425549] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [133.425697] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [133.425776] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [133.425851] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [133.425921] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [133.425992] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [133.426064] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [133.426135] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [133.426276] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [133.426344] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [133.426411] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [133.426480] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [133.426554] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [133.426627] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [133.426693] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [133.427014] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [133.429422] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [133.429522] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [133.429604] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [133.429674] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [133.429741] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [133.429805] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [133.429866] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [133.429926] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [133.429987] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [133.430047] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [133.430105] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [133.430164] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [133.430221] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [133.430279] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [133.430360] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [133.430524] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [133.430920] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [133.431963] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [133.432978] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [133.453267] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [133.454152] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [133.458475] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [133.459844] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [133.460077] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 5ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [133.460347] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [133.461000] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [133.461101] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [133.461182] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [133.461260] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [133.461338] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [133.461411] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [133.461493] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [133.461566] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [133.461640] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [133.463687] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [133.463768] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [133.463839] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [133.465102] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [133.465185] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [133.469225] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [133.470377] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [133.472532] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [133.472629] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [133.472714] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [133.472796] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [133.472872] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [133.472945] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [133.473016] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [133.473086] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [133.473154] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [133.473220] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [133.473287] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [133.473353] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [133.473420] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [133.473497] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [133.474089] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [133.474532] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [133.474647] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [133.476173] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [133.485478] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [133.485798] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [133.485896] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [133.485974] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [133.486052] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [133.486127] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [133.486199] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [133.486271] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [133.486273] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [133.486274] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [133.486275] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [133.486276] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [133.486277] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [133.486278] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [133.486279] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [133.486282] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [133.486411] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [133.486561] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [133.486688] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [133.486811] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [133.487800] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [133.487898] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [133.487989] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [133.488079] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [133.488166] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [133.488251] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [133.488330] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [133.488411] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [133.488507] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [133.488598] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [133.488681] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [133.488760] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [133.488835] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [133.488908] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [133.488979] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [133.489051] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [133.489123] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [133.489194] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [133.489267] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [133.489338] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [133.489406] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [133.489480] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [133.489551] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [133.489620] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [133.489689] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [133.489758] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [133.489850] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [133.489938] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [133.490152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [133.490234] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [133.490312] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [133.490515] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [133.490608] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [133.490695] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [133.490913] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [133.490994] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [133.491071] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [133.491487] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [133.494422] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [133.494527] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [133.494613] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [133.494692] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [133.494766] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [133.494838] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [133.494909] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [133.494980] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [133.495048] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [133.495116] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [133.495182] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [133.495249] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [133.495314] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [133.495377] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [133.495476] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [133.495574] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [133.496215] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [133.515235] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [133.516186] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [133.525482] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [133.525829] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [133.526298] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [133.526392] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [133.527656] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [133.527744] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [133.534405] Creating 4 MTD partitions on "xe.nvm.768":
<5> [133.534416] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [133.540149] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [133.545475] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [133.551522] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [133.557637] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [133.557758] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [133.557973] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [133.558023] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [133.558119] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [133.558201] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [133.558281] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [133.558971] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [133.559097] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [133.559202] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [133.559300] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [133.559392] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [133.559494] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [133.559588] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [133.559678] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [133.559769] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [133.559865] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [133.559956] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [133.560042] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [133.560129] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [133.560213] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [133.560298] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [133.560383] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [133.560466] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [133.560571] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [133.560664] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [133.560754] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<6> [133.560938] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [133.560974] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [133.561092] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [133.561200] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [133.561334] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [133.561441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [133.561670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [133.561769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [133.562443] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [133.562634] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [133.562783] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [133.562921] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [133.565101] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [133.566297] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [133.568311] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [133.568423] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [133.569278] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [133.569371] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [133.571913] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [133.575613] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [133.575663] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [133.576159] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [133.576223] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [133.576599] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [133.576639] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [133.577048] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [133.577749] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [133.577791] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [133.578094] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [133.578123] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [133.578431] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [133.578724] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [133.579055] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [133.580244] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [133.580360] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [133.580458] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [133.580567] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [133.580671] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [133.580881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [133.581399] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [133.585035] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.585159] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [133.589289] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.589398] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [133.589558] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [133.593188] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [133.593218] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [133.594435] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [133.596949] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [133.596975] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [133.598098] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [133.600430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [133.608972] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [133.609877] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [133.613988] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [133.614010] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [133.614120] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff88815fca0720 (2)
<7> [133.615963] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88815fca0720 (1)
<7> [133.615977] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [133.616131] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [133.616268] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [133.616396] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.616536] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [133.617416] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88815fca0720 (2)
<7> [133.617429] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [133.617483] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [133.617638] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [133.617894] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [133.618023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [133.618028] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.618153] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [133.619387] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [133.619390] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [133.619510] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.619631] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [133.623782] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.623910] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [133.628076] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.628214] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [133.632320] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [133.632579] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [133.632583] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [133.632588] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [133.636765] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [133.636772] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [133.636777] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [133.640905] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [133.640910] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [133.640914] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [133.655068] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.660498] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [133.669494] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [133.670199] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [133.696045] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.697188] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [133.734512] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.766945] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.767879] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [133.767932] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [133.768544] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [133.801945] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.834966] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.835020] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [133.835081] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [133.836789] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [133.836864] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [133.869955] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.902962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.903614] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [133.937962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [133.971639] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [134.006963] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [134.040963] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [134.041009] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [134.041070] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [134.041142] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [134.041221] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88815fca0720 (1)
<7> [134.041575] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [134.047431] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [134.048571] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [134.049633] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [134.050182] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [134.050698] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [134.051114] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [134.051140] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [134.051158] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [134.052418] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [134.052820] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [134.053757] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [134.054089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [134.054098] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.054391] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [134.055761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [134.055767] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [134.055980] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [134.055990] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [134.055998] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [134.060256] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [134.060265] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [134.060273] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [134.064562] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [134.064571] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [134.064578] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [134.068859] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [134.068868] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [134.068874] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [134.068879] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [134.068883] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [134.068887] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [134.068891] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [134.068895] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [134.068899] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [134.068952] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [134.068969] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [134.069014] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [134.069027] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [134.070166] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [134.070089] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [134.070351] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [134.070590] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [134.070712] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [134.070727] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [134.070794] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [134.070990] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [134.071176] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [134.071354] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [134.071555] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [134.071730] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [134.071891] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [134.072048] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [134.072205] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [134.072357] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [134.072511] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [134.072660] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [134.072802] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [134.072942] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [134.073083] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [134.073234] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [134.073373] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [134.073512] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [134.073644] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [134.073902] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [134.074073] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [134.074227] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [134.074376] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [134.074523] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [134.075107] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [134.075114] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [134.075118] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [134.079277] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [134.079282] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [134.079285] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [134.081221] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [134.081244] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [134.081974] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [134.083502] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [134.083520] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [134.084243] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<6> [134.084641] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [134.085142] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [134.085451] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [134.085386] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [134.085539] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [134.085868] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [134.086096] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [134.090192] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [134.090718] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [134.090968] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [134.091234] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [134.091378] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [134.091538] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [134.091681] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [134.091688] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [134.091693] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [134.092155] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [134.092286] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [134.092675] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [134.092795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [134.092802] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [134.092918] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [134.094124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [134.094128] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [134.094247] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [134.094254] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [134.094259] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [134.098416] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [134.098421] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [134.098425] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [134.102546] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [134.102551] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [134.102555] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [134.106649] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [134.106654] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [134.106661] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [134.106663] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [134.106665] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [134.106667] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [134.106669] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [134.106670] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [134.106672] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [134.106792] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [134.106806] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [134.106827] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [134.106838] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [134.106840] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [134.106895] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [134.156566] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [134.158718] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [134.159355] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [134.159971] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [134.160581] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [135.108093] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [135.108745] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [135.109304] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [135.109992] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [135.110683] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [135.111228] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [135.112602] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [135.112962] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [135.113086] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [135.113236] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [135.114080] Deleting MTD partitions on "xe.nvm.768":
<6> [135.114082] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [135.114992] Deleting xe.nvm.768.GSC MTD partition
<6> [135.118194] Deleting xe.nvm.768.OptionROM MTD partition
<6> [135.121365] Deleting xe.nvm.768.DAM MTD partition
<7> [135.123628] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [135.124093] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [135.125236] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [135.125634] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [135.126026] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [135.127298] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [135.127731] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [135.175261] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [135.176887] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [135.177112] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [135.185214] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [135.186377] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [135.260018] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [135.264719] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [135.276584] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [135.314349] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [135.316802] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88815fca0720 (0)
<7> [135.319853] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff88815fca0720 (0)
<7> [135.319932] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [135.843439] Setting dangerous option force_probe - tainting kernel
<6> [135.845983] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [135.847022] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [135.847199] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [135.847206] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [135.847315] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [135.847410] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [135.847525] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [135.848886] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [135.848912] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [135.848914] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [135.848916] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [135.848917] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [135.890871] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [135.891077] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [135.891196] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [135.891300] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [135.891405] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [135.891507] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [135.891607] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [135.891712] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [135.891803] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [135.891892] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [135.891983] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [135.892082] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [135.892173] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [135.892259] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [135.892346] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [135.892844] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [135.906218] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [135.906320] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [135.906416] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [135.906519] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [135.906615] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [135.906705] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [135.906796] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [135.906884] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [135.906966] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [135.907058] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [135.907142] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [135.907224] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [135.907306] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [135.907387] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [135.907480] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [135.907575] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [135.907660] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [135.907740] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [135.907822] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [135.907904] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [135.907993] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [135.908079] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [135.908159] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [135.908239] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [135.908318] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [135.908397] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [135.908488] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [135.908572] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [135.908659] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [135.908746] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [135.908868] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [135.909004] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [135.909119] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [135.909277] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [135.909437] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [135.909536] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [135.909635] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [135.909758] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [135.909862] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [135.909972] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [135.910062] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [135.910152] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [135.910604] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [135.911109] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [135.911212] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [135.911305] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [135.911395] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [135.911489] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [135.911585] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [135.911680] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [135.911705] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [135.911764] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [135.911827] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [135.911847] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [135.911925] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [135.911931] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [135.912012] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [135.912015] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [135.912096] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [135.912097] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [135.912177] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [135.912179] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [135.912255] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [135.912261] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [135.912334] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [135.912353] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [135.912411] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [135.912438] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [135.912501] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [135.912532] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [135.912585] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [135.912625] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [135.912669] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [135.912717] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [135.912748] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [135.912801] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [135.912824] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [135.912883] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [135.912899] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [135.912966] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [135.912973] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [135.913046] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [135.913051] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [135.913119] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [135.913133] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [135.913220] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [135.913303] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [135.913388] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [135.913474] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [135.913564] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [135.913654] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [135.917760] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [135.922526] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [135.922652] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [135.922759] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [135.922991] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [135.923462] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<6> [135.923760] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [135.924204] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [135.924360] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [135.924733] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [135.924913] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [135.925408] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [135.925576] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [135.925929] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [135.926106] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [135.926384] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [135.926601] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [135.926925] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [135.927034] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [135.927317] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [135.927449] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [135.927602] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [135.927731] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [135.927813] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [135.927894] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [135.927974] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [135.928054] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [135.928135] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [135.928214] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [135.928300] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [135.928386] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [135.928477] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [135.928567] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [135.928657] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [135.928737] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [135.928816] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [135.928893] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [135.928970] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [135.929048] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [135.929128] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [135.929213] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [135.929293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [135.929372] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [135.929452] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [135.929546] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [135.929629] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [135.929716] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [135.929809] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [135.929887] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [135.929962] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [135.930038] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [135.930112] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [135.930190] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [135.930264] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [135.930337] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [135.930422] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [135.930515] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [135.930606] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [135.930696] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [135.930779] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [135.930863] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [135.930945] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [135.931026] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [135.931129] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [135.931223] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [135.931312] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [135.931399] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [135.931494] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [135.931580] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [135.931665] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [135.931745] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [135.931825] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [135.931905] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [135.931985] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [135.932064] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [135.932144] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [135.932224] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [135.932304] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [135.932386] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [135.932495] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [135.932624] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [135.932712] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [135.932799] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [135.932883] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [135.932969] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [135.933061] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [135.933148] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [135.933233] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [135.933317] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [135.933400] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [135.933491] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [135.933572] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [135.933655] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [135.933736] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [135.933818] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [135.933918] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [135.934013] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [135.934101] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [135.934186] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [135.934298] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [135.934402] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [135.934516] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [135.934652] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [135.934792] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [135.934897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [135.934995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [135.935091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [135.936883] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [135.938831] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [135.938937] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [135.939020] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [135.939096] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [135.939169] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [135.939240] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [135.939310] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [135.939381] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [135.939453] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [135.939632] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [135.939703] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [135.939771] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [135.939838] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [135.939904] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [135.939973] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [135.940087] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [135.941484] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [135.946478] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [135.947846] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [135.948562] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [135.948846] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [135.948945] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [135.949036] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [135.949123] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [135.949207] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [136.035596] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [136.035599] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [136.035753] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [136.035855] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [136.035945] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [136.036022] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [136.036130] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [136.036230] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [136.036344] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [136.036415] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [136.036503] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [136.036601] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [136.036745] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [136.036819] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [136.036895] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [136.036968] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [136.038033] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [136.038114] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [136.038194] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [136.038269] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [136.038348] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [136.038427] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [136.038540] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [136.038624] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [136.038708] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [136.038783] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [136.038856] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [136.038927] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [136.038997] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [136.039072] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [136.039146] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [136.039216] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [136.039284] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [136.039351] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [136.039416] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [136.039487] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [136.039576] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [136.039655] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [136.039728] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [136.039795] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [136.039860] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [136.039925] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [136.040003] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [136.040078] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [136.040152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [136.040224] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [136.040298] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [136.040372] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [136.040444] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [136.040534] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [136.040613] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [136.040691] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [136.040762] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [136.040831] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [136.040904] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [136.040976] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [136.041050] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [136.041119] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [136.041262] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [136.041350] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [136.041438] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [136.041527] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [136.041685] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [136.041759] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [136.041825] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [136.041889] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [136.042014] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [136.042089] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [136.042162] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [136.042232] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [136.042301] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [136.042369] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [136.042435] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [136.042612] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [136.042696] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [136.042771] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [136.042842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [136.042913] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [136.042980] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [136.043047] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [136.043393] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [136.045814] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [136.045901] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [136.045976] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [136.046048] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [136.046119] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [136.046185] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [136.046254] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [136.046322] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [136.046388] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [136.046451] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [136.046528] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [136.046597] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [136.046667] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [136.046728] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [136.046812] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [136.046972] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [136.047418] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [136.048513] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [136.049530] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [136.069842] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [136.070928] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [136.075477] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [136.076852] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 5ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [136.077127] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [136.077723] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [136.077821] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [136.077898] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [136.077970] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [136.078043] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [136.078117] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [136.078194] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [136.078271] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [136.078350] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [136.080838] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [136.080936] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [136.081018] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [136.082918] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [136.083024] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [136.087195] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [136.088356] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [136.090762] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [136.090865] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [136.090960] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [136.091050] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [136.091134] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [136.091216] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [136.091298] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [136.091380] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [136.091466] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [136.091565] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [136.091648] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [136.091727] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [136.091805] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [136.091883] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [136.092596] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [136.093097] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [136.093246] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [136.094813] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [136.104486] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [136.104979] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [136.105216] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [136.105421] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [136.105651] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [136.105860] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [136.106074] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [136.106270] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [136.106274] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [136.106277] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [136.106280] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [136.106283] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [136.106286] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [136.106288] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [136.106291] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [136.106296] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [136.106663] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [136.107031] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [136.107346] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [136.107700] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [136.109785] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [136.109997] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [136.110192] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [136.110369] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [136.110546] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [136.110707] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [136.110855] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [136.111009] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [136.111165] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [136.111313] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [136.111457] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [136.111637] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [136.111773] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [136.111908] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [136.112036] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [136.112158] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [136.112273] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [136.112383] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [136.112511] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [136.112623] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [136.112734] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [136.112842] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [136.112945] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [136.113050] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [136.113150] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [136.113250] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [136.113369] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [136.113492] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [136.113771] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [136.113898] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [136.114016] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [136.114259] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [136.114365] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [136.114478] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [136.114744] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [136.114843] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [136.114940] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [136.115421] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [136.118448] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [136.118544] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [136.118626] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [136.118699] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [136.118769] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [136.118836] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [136.118903] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [136.118970] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [136.119041] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [136.119111] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [136.119182] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [136.119250] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [136.119317] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [136.119382] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [136.119480] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [136.119575] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [136.120199] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [136.139261] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [136.140162] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [136.149477] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [136.149797] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [136.150264] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [136.150355] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [136.151618] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [136.151715] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [136.158834] Creating 4 MTD partitions on "xe.nvm.768":
<5> [136.158848] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [136.163786] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [136.168413] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [136.172083] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [136.178682] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [136.178804] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [136.179037] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [136.179091] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [136.179191] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [136.179278] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [136.179359] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [136.180105] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [136.180259] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [136.180380] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [136.180624] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [136.180739] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [136.180830] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [136.180921] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [136.181020] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [136.181117] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [136.181212] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [136.181305] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [136.181394] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [136.181501] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [136.181624] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [136.181718] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [136.181805] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [136.181898] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [136.181991] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [136.182079] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [136.182163] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [136.182380] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [136.182526] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [136.182670] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [136.182703] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [136.182806] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [136.182917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [136.183015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [136.183109] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [136.183541] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [136.183718] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [136.183870] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [136.184013] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [136.185736] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [136.187157] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [136.188996] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [136.189108] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [136.190426] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [136.190592] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [136.192231] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [136.194492] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [136.194614] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [136.195368] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [136.195447] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [136.196086] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [136.196151] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [136.196966] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [136.198529] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [136.198627] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [136.199279] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [136.199334] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [136.199835] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [136.199981] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [136.200744] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [136.202736] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [136.203159] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [136.203272] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [136.203371] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [136.203479] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [136.203579] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [136.203837] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [136.206894] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.207015] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [136.211137] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.211240] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [136.211381] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [136.215215] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.215244] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [136.216364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [136.218834] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.218857] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [136.219967] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [136.222262] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [136.230368] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [136.231287] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [136.235421] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.235442] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [136.235569] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff8881212442c0 (2)
<7> [136.237721] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881212442c0 (1)
<7> [136.237735] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [136.237900] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [136.238037] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [136.238135] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.238251] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [136.239133] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881212442c0 (2)
<7> [136.239145] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [136.239195] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [136.239342] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [136.239599] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [136.239722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [136.239727] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.239843] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [136.241068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [136.241072] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [136.241199] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.241393] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [136.245545] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.245644] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [136.249791] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.249935] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [136.254071] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [136.254429] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [136.254448] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [136.254457] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [136.258693] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [136.258702] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [136.258706] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [136.262898] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [136.262905] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [136.262909] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [136.276322] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.285487] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [136.315766] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.322604] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [136.354061] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.386909] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.387816] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.387898] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [136.420971] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.453962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.454011] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [136.454073] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [136.454600] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [136.487961] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.521961] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.523492] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.523563] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [136.556962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.590967] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.591605] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [136.624961] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.658962] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [136.659006] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [136.659060] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [136.659152] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [136.659231] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881212442c0 (1)
<7> [136.660562] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [136.666082] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [136.667198] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [136.668279] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [136.668855] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [136.669300] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [136.669747] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [136.669773] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [136.669790] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [136.670445] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [136.670888] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [136.671944] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [136.672285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [136.672295] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.672629] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [136.674032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [136.674038] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [136.674259] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [136.674270] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [136.674278] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [136.678543] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [136.678552] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [136.678561] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [136.682841] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [136.682853] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [136.682861] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [136.687117] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [136.687126] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [136.687133] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [136.687138] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [136.687142] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [136.687147] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [136.687151] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [136.687155] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [136.687159] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [136.687213] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [136.687231] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [136.687284] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [136.687298] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [136.688518] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [136.688427] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [136.688727] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [136.689006] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [136.688954] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [136.689021] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [136.689177] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [136.689379] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [136.689580] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [136.689762] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [136.689936] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [136.690103] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [136.690264] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [136.690421] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [136.690598] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [136.690752] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [136.690900] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [136.691041] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [136.691189] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [136.691336] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [136.691487] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [136.691626] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [136.691754] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [136.691890] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [136.692017] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [136.692266] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [136.692448] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [136.692613] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [136.692752] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [136.692890] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [136.693339] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [136.693347] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [136.693351] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [136.697522] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [136.697526] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [136.697530] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [136.699452] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.699497] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [136.700229] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [136.701833] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [136.701851] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<6> [136.702380] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [136.702514] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [136.702888] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [136.703199] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [136.703242] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [136.703595] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [136.703672] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [136.703804] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [136.707965] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [136.708197] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [136.708734] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [136.709274] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [136.709412] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [136.709559] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [136.709701] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [136.709711] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [136.709720] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [136.710180] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [136.710319] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [136.710715] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [136.710839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [136.710843] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [136.710959] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [136.712139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [136.712142] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [136.712248] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [136.712253] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [136.712258] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [136.716380] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [136.716385] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [136.716388] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [136.720512] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [136.720517] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [136.720521] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [136.724650] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [136.724655] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [136.724663] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [136.724666] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [136.724667] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [136.724669] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [136.724671] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [136.724672] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [136.724674] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [136.724801] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [136.724817] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [136.724842] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [136.724852] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [136.724854] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [136.725092] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [136.772656] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [136.774244] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [136.774893] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [136.775445] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [136.776034] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [137.726281] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [137.726942] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [137.727553] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [137.728206] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [137.728916] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [137.729503] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [137.730267] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [137.730391] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [137.730523] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [137.730676] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [137.732877] Deleting MTD partitions on "xe.nvm.768":
<6> [137.732889] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [137.736321] Deleting xe.nvm.768.GSC MTD partition
<6> [137.738296] Deleting xe.nvm.768.OptionROM MTD partition
<6> [137.738977] Deleting xe.nvm.768.DAM MTD partition
<7> [137.741384] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [137.741792] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [137.742978] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [137.743404] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [137.743826] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [137.745502] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [137.745881] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [137.768006] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [137.769906] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [137.770222] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [137.787878] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [137.789206] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [137.866328] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [137.869548] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [137.870029] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [137.921414] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [137.923787] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881212442c0 (0)
<7> [137.927125] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff8881212442c0 (0)
<7> [137.930292] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [138.476391] Setting dangerous option force_probe - tainting kernel
<6> [138.478994] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [138.480172] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [138.480362] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [138.480370] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [138.480498] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [138.480589] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [138.480684] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [138.482074] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [138.482101] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [138.482103] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [138.482104] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [138.482106] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [138.530660] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [138.530901] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [138.531024] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [138.531133] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [138.531240] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [138.531334] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [138.531428] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [138.531538] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [138.531635] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [138.531727] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [138.531813] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [138.531909] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [138.531997] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [138.532083] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [138.532169] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [138.532922] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [138.546286] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [138.546392] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [138.546492] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [138.546591] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [138.546689] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [138.546782] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [138.546875] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [138.546962] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [138.547044] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [138.547138] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [138.547224] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [138.547309] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [138.547394] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [138.547489] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [138.547584] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [138.547676] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [138.547764] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [138.547852] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [138.547945] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [138.548034] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [138.548119] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [138.548204] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [138.548287] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [138.548371] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [138.548453] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [138.548548] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [138.548637] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [138.548727] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [138.548813] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [138.548905] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [138.549020] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [138.549166] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [138.549293] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [138.549458] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [138.549645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [138.549749] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [138.549841] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [138.549960] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [138.550061] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [138.550176] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [138.550281] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [138.550379] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [138.550843] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [138.551341] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [138.551443] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [138.551550] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [138.551650] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [138.551750] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [138.551807] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [138.551842] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [138.551937] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [138.551935] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [138.552025] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [138.552043] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [138.552112] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [138.552139] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [138.552200] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [138.552230] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [138.552287] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [138.552320] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [138.552379] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [138.552405] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [138.552480] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [138.552501] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [138.552573] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [138.552587] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [138.552671] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [138.552670] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [138.552750] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [138.552757] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [138.552827] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [138.552840] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [138.552904] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [138.552922] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [138.552980] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [138.553004] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [138.553055] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [138.553087] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [138.553130] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [138.553170] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [138.553206] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [138.553257] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [138.553282] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [138.553343] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [138.553428] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [138.553521] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [138.553615] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [138.553721] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [138.553811] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [138.553899] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [138.554000] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [138.557071] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [138.562617] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [138.562751] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [138.562854] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [138.563346] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [138.563817] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<6> [138.564101] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [138.564294] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [138.564407] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [138.564666] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [138.564785] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [138.565074] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [138.565174] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [138.565364] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [138.565462] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [138.565678] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [138.565810] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [138.566103] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [138.566209] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [138.566522] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [138.566673] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [138.566810] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [138.566940] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [138.567034] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [138.567123] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [138.567210] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [138.567297] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [138.567385] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [138.567517] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [138.567613] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [138.567698] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [138.567777] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [138.567854] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [138.567931] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [138.568008] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [138.568086] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [138.568164] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [138.568242] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [138.568321] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [138.568400] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [138.568495] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [138.568588] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [138.568672] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [138.568753] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [138.568832] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [138.568909] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [138.568987] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [138.569066] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [138.569141] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [138.569215] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [138.569289] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [138.569363] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [138.569442] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [138.569535] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [138.569626] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [138.569715] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [138.569792] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [138.569877] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [138.569960] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [138.570037] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [138.570112] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [138.570187] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [138.570262] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [138.570345] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [138.570423] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [138.570510] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [138.570596] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [138.570678] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [138.570756] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [138.570840] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [138.570922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [138.571002] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [138.571082] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [138.571161] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [138.571240] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [138.571317] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [138.571393] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [138.571475] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [138.571576] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [138.571671] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [138.571752] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [138.571831] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [138.571911] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [138.571996] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [138.572077] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [138.572155] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [138.572232] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [138.572306] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [138.572379] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [138.572458] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [138.572556] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [138.572646] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [138.572732] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [138.572814] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [138.572894] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [138.572985] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [138.573072] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [138.573157] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [138.573237] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [138.573340] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [138.573433] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [138.573533] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [138.573655] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [138.573787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [138.573898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [138.574042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [138.574184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [138.575874] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [138.577772] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [138.577881] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [138.577965] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [138.578041] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [138.578113] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [138.578182] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [138.578251] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [138.578320] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [138.578388] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [138.578457] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [138.578549] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [138.578623] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [138.578693] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [138.578760] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [138.578827] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [138.578938] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [138.580422] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [138.584475] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [138.587127] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [138.587714] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [138.587953] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [138.588034] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [138.588107] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [138.588179] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [138.588254] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [138.674995] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [138.674997] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [138.675130] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [138.675226] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [138.675314] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [138.675395] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [138.675533] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [138.675647] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [138.675786] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [138.675860] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [138.675938] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [138.676010] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [138.676132] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [138.676201] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [138.676276] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [138.676353] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [138.677454] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [138.677554] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [138.677644] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [138.677720] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [138.677794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [138.677869] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [138.677944] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [138.678018] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [138.678094] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [138.678168] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [138.678242] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [138.678313] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [138.678383] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [138.678453] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [138.678535] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [138.678610] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [138.678679] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [138.678747] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [138.678814] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [138.678880] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [138.678946] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [138.679012] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [138.679084] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [138.679155] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [138.679222] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [138.679289] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [138.679366] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [138.679440] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [138.679524] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [138.679602] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [138.679672] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [138.679741] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [138.679809] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [138.679882] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [138.679951] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [138.680018] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [138.680091] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [138.680162] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [138.680234] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [138.680306] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [138.680377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [138.680444] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [138.680603] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [138.680678] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [138.680750] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [138.680817] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [138.680949] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [138.681016] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [138.681082] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [138.681146] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [138.681266] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [138.681337] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [138.681411] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [138.681485] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [138.681560] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [138.681631] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [138.681698] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [138.681838] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [138.681915] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [138.681988] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [138.682056] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [138.682124] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [138.682190] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [138.682256] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [138.682617] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [138.685063] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [138.685145] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [138.685218] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [138.685286] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [138.685353] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [138.685420] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [138.685492] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [138.685563] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [138.685625] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [138.685684] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [138.685744] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [138.685801] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [138.685858] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [138.685920] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [138.686006] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [138.686154] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [138.686552] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [138.687572] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [138.688569] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [138.708139] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [138.709150] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [138.713476] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [138.714850] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [138.715087] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 5ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [138.715357] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [138.715961] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [138.716055] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [138.716133] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [138.716205] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [138.716279] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [138.716352] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [138.716421] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [138.716505] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [138.716585] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [138.718875] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [138.718974] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [138.719059] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [138.721339] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [138.721434] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [138.724499] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [138.725601] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [138.728033] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [138.728131] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [138.728215] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [138.728295] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [138.728370] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [138.728447] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [138.728537] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [138.728628] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [138.728698] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [138.728765] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [138.728831] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [138.728896] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [138.728961] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [138.729026] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [138.729587] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [138.730089] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [138.730205] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [138.731747] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [138.741518] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [138.741941] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [138.742108] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [138.742253] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [138.742388] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [138.742547] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [138.742675] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [138.742804] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [138.742806] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [138.742808] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [138.742810] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [138.742812] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [138.742814] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [138.742816] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [138.742817] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [138.742822] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [138.743166] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [138.743558] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [138.743927] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [138.744312] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [138.746358] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [138.746595] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [138.746823] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [138.747045] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [138.747239] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [138.747430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [138.747644] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [138.747741] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [138.747826] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [138.747906] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [138.747983] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [138.748060] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [138.748136] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [138.748210] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [138.748282] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [138.748351] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [138.748420] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [138.748498] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [138.748568] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [138.748637] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [138.748706] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [138.748774] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [138.748842] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [138.748908] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [138.748975] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [138.749044] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [138.749130] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [138.749215] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [138.749435] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [138.749532] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [138.749610] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [138.749811] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [138.749896] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [138.749975] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [138.750185] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [138.750261] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [138.750336] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [138.750746] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [138.753832] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [138.753961] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [138.754078] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [138.754191] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [138.754302] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [138.754412] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [138.754543] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [138.754660] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [138.754762] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [138.754854] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [138.754944] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [138.755035] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [138.755122] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [138.755208] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [138.755324] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [138.755454] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [138.756212] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [138.775486] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [138.776493] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [138.786475] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [138.786768] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [138.787592] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [138.787719] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [138.789294] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [138.789390] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [138.795874] Creating 4 MTD partitions on "xe.nvm.768":
<5> [138.795886] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [138.802371] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [138.810282] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [138.814224] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [138.824955] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [138.825384] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [138.826660] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [138.826916] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [138.827327] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [138.827650] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [138.827917] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<6> [138.829362] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [138.829779] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [138.830282] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [138.830741] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [138.831141] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [138.831517] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [138.831652] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [138.831782] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [138.831925] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [138.832085] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [138.832242] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [138.832391] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [138.832511] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [138.832634] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [138.832756] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [138.832959] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [138.833348] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [138.833523] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [138.833639] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [138.833746] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [138.833941] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [138.834226] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [138.834352] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [138.834455] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [138.834618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [138.834723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [138.834952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [138.835076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [138.835559] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [138.835787] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [138.835972] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [138.836118] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [138.837806] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [138.838857] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [138.841755] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [138.841870] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [138.842766] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [138.842859] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [138.843758] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [138.845401] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [138.845446] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [138.846172] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [138.846236] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [138.847174] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [138.847215] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [138.847724] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [138.848341] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [138.848376] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [138.848740] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [138.848770] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [138.849100] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [138.849230] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [138.849826] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [138.851044] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [138.851197] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [138.851324] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [138.851416] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [138.851545] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [138.851755] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [138.852289] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [138.855917] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.856046] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [138.860206] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.860315] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [138.860461] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [138.864161] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [138.864183] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [138.865499] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [138.867823] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [138.867845] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [138.868916] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [138.871148] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [138.880507] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [138.881347] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [138.885261] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [138.885279] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [138.885369] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff888127c76720 (2)
<7> [138.887163] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888127c76720 (1)
<7> [138.887174] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [138.887291] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [138.887395] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [138.887517] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.887646] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [138.888353] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888127c76720 (2)
<7> [138.888365] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [138.888415] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [138.888576] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [138.888847] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [138.888956] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [138.888960] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [138.889068] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [138.890291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [138.890294] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [138.890393] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.890498] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [138.894613] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.894721] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [138.898862] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.899001] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [138.903137] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [138.903386] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [138.903396] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [138.903407] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [138.907726] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [138.907735] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [138.907739] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [138.911897] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [138.911902] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [138.911906] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [138.925322] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [138.933476] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [138.964072] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [138.970540] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [138.997922] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.030722] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.031598] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [139.031689] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [139.065339] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.098930] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.098977] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [139.099031] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [139.099561] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [139.133819] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.167967] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.169768] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [139.169838] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [139.203968] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.238168] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.238768] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [139.273063] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.307550] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [139.307595] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [139.307652] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [139.307747] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [139.307820] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888127c76720 (1)
<7> [139.309212] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [139.314861] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [139.316008] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [139.317066] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [139.317658] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [139.318183] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [139.318695] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [139.318727] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [139.318751] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [139.319440] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [139.319921] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [139.320932] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [139.321305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [139.321315] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.321662] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [139.323107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [139.323115] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [139.323356] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [139.323367] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [139.323375] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [139.327676] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [139.327686] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [139.327695] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [139.331991] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [139.332001] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [139.332008] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [139.336271] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [139.336281] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [139.336287] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [139.336292] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [139.336296] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [139.336300] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [139.336304] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [139.336308] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [139.336312] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [139.336368] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [139.336386] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [139.336435] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [139.336448] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [139.337774] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [139.337704] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [139.337969] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [139.338240] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [139.338191] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [139.338256] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [139.338402] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [139.338676] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [139.338880] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [139.339058] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [139.339228] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [139.339402] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [139.339603] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [139.339796] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [139.339949] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [139.340094] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [139.340236] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [139.340378] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [139.340537] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [139.340713] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [139.340854] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [139.340988] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [139.341114] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [139.341241] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [139.341366] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [139.341594] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [139.341790] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [139.341943] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [139.342089] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [139.342230] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [139.342589] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [139.342598] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [139.342603] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [139.346806] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [139.346816] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [139.346823] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [139.349316] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [139.349380] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [139.349976] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [139.352134] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [139.352186] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [139.352751] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [139.354277] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [139.359721] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [139.360755] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [139.361774] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [139.362278] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [139.362500] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [139.362690] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [139.362700] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [139.362707] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [139.363291] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [139.363517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<6> [139.363663] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [139.364013] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [139.364202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [139.364208] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [139.364209] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [139.364388] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<6> [139.364528] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [139.364572] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [139.364926] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [139.365125] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [139.365669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [139.365673] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [139.365810] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [139.365816] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [139.365821] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [139.368104] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [139.369996] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [139.370003] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [139.370008] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [139.374221] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [139.374233] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [139.374241] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [139.378461] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [139.378487] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [139.378506] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [139.378512] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [139.378517] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [139.378522] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [139.378527] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [139.378532] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [139.378537] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [139.378661] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [139.378675] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [139.378697] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [139.378707] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [139.378708] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [139.384234] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [139.421563] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [139.422845] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [139.423349] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [139.423870] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [139.424352] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [140.385160] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [140.385735] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [140.386227] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [140.386867] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [140.387545] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [140.388074] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [140.389824] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [140.390344] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [140.390938] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [140.391546] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [140.394612] Deleting MTD partitions on "xe.nvm.768":
<6> [140.394624] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [140.396320] Deleting xe.nvm.768.GSC MTD partition
<6> [140.398583] Deleting xe.nvm.768.OptionROM MTD partition
<6> [140.401916] Deleting xe.nvm.768.DAM MTD partition
<7> [140.407123] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [140.417649] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [140.430109] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [140.435530] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [140.441200] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [140.453333] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [140.454662] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [140.486186] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [140.487857] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [140.487995] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [140.494569] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [140.495427] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [140.580951] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [140.584573] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [140.588538] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [140.676152] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [140.677932] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888127c76720 (0)
<7> [140.678206] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff888127c76720 (0)
<7> [140.679600] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [141.217038] Setting dangerous option force_probe - tainting kernel
<6> [141.219804] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [141.220841] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [141.221022] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [141.221032] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [141.221142] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [141.221233] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [141.221330] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [141.222727] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [141.222754] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [141.222756] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [141.222758] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [141.222760] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [141.264272] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [141.264483] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [141.264605] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [141.264734] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [141.264851] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [141.264945] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [141.265034] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [141.265133] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [141.265223] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [141.265311] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [141.265397] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [141.265499] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [141.265592] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [141.265686] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [141.265774] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [141.266182] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [141.279496] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [141.279595] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [141.279682] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [141.279766] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [141.279848] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [141.279928] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [141.280010] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [141.280090] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [141.280169] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [141.280258] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [141.280347] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [141.280432] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [141.280523] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [141.280609] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [141.280691] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [141.280769] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [141.280846] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [141.280922] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [141.281003] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [141.281085] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [141.281171] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [141.281254] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [141.281334] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [141.281414] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [141.281507] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [141.281592] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [141.281676] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [141.281755] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [141.281833] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [141.281917] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [141.282029] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [141.282163] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [141.282277] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [141.282429] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [141.282602] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [141.282695] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [141.282787] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [141.282901] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [141.282998] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [141.283104] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [141.283195] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [141.283283] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [141.283715] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [141.284213] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [141.284315] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [141.284405] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [141.284501] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [141.284586] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [141.284670] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [141.284750] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [141.284769] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [141.284861] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [141.284881] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [141.284946] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [141.284988] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [141.285031] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [141.285083] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [141.285114] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [141.285170] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [141.285195] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [141.285254] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [141.285277] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [141.285338] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [141.285357] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [141.285425] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [141.285442] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [141.285518] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [141.285532] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [141.285604] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [141.285622] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [141.285684] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [141.285705] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [141.285762] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [141.285793] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [141.285839] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [141.285881] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [141.285914] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [141.285969] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [141.285992] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [141.286054] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [141.286069] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [141.286141] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [141.286147] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [141.286221] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [141.286222] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [141.286305] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [141.286387] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [141.286474] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [141.286560] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [141.286647] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [141.286745] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [141.290006] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [141.295621] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [141.295750] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [141.295858] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [141.296090] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [141.296577] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<6> [141.296882] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [141.297096] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [141.297209] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [141.297442] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [141.297622] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [141.297968] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [141.298080] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [141.298276] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [141.298381] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [141.298610] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [141.298741] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [141.299045] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [141.299147] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [141.299456] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [141.299666] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [141.299801] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [141.299931] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [141.300023] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [141.300114] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [141.300205] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [141.300297] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [141.300391] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [141.300492] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [141.300620] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [141.300822] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [141.300935] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [141.301049] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [141.301145] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [141.301235] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [141.301319] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [141.301400] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [141.301488] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [141.301575] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [141.301661] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [141.301746] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [141.301835] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [141.301920] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [141.302004] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [141.302086] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [141.302164] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [141.302245] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [141.302328] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [141.302405] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [141.302492] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [141.302576] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [141.302659] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [141.302748] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [141.302832] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [141.302910] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [141.302986] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [141.303060] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [141.303137] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [141.303213] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [141.303292] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [141.303369] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [141.303444] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [141.303577] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [141.303724] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [141.303830] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [141.303917] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [141.303998] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [141.304079] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [141.304158] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [141.304237] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [141.304312] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [141.304388] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [141.304486] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [141.304578] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [141.304657] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [141.304736] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [141.304819] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [141.304899] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [141.304976] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [141.305052] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [141.305127] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [141.305201] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [141.305281] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [141.305363] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [141.305443] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [141.305532] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [141.305617] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [141.305703] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [141.305783] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [141.305860] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [141.305936] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [141.306012] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [141.306087] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [141.306164] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [141.306242] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [141.306331] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [141.306416] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [141.306511] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [141.306604] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [141.306708] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [141.306801] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [141.306891] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [141.307011] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [141.307136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [141.307230] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [141.307318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [141.307405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [141.309469] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [141.311375] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [141.311479] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [141.311561] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [141.311630] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [141.311694] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [141.311759] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [141.311820] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [141.311883] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [141.311943] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [141.312004] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [141.312062] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [141.312123] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [141.312186] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [141.312248] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [141.312310] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [141.312411] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [141.313883] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [141.318471] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [141.319841] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [141.319997] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [141.320632] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [141.320900] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [141.320996] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [141.321083] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [141.321164] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [141.321239] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [141.407276] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [141.407278] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [141.407418] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [141.407526] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [141.407626] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [141.407715] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [141.407830] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [141.407934] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [141.408054] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [141.408132] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [141.408213] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [141.408291] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [141.408418] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [141.408502] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [141.408587] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [141.408663] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [141.409759] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [141.409843] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [141.409926] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [141.410003] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [141.410079] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [141.410152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [141.410224] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [141.410294] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [141.410373] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [141.410447] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [141.410532] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [141.410604] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [141.410672] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [141.410737] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [141.410805] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [141.410873] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [141.410937] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [141.411001] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [141.411063] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [141.411132] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [141.411201] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [141.411268] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [141.411333] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [141.411398] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [141.411467] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [141.411537] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [141.411621] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [141.411699] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [141.411770] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [141.411842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [141.411913] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [141.411983] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [141.412053] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [141.412125] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [141.412193] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [141.412259] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [141.412325] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [141.412392] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [141.412472] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [141.412550] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [141.412627] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [141.412698] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [141.412849] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [141.412925] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [141.412998] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [141.413067] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [141.413203] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [141.413273] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [141.413341] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [141.413407] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [141.413564] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [141.413637] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [141.413713] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [141.413783] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [141.413851] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [141.413917] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [141.413983] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [141.414125] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [141.414193] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [141.414260] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [141.414325] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [141.414392] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [141.414456] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [141.414536] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [141.414890] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [141.417299] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [141.417379] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [141.417449] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [141.417529] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [141.417599] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [141.417664] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [141.417723] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [141.417782] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [141.417847] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [141.417911] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [141.417971] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [141.418029] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [141.418086] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [141.418145] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [141.418225] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [141.418377] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [141.418855] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [141.419934] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [141.420936] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [141.441500] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [141.442481] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [141.447470] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [141.448835] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [141.449105] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [141.449766] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [141.449861] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [141.449935] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [141.450004] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [141.450073] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [141.450140] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [141.450208] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [141.450275] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [141.450344] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [141.452099] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [141.452182] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [141.452258] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [141.453988] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [141.454073] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [141.457625] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [141.458679] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [141.460807] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [141.460898] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [141.460974] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [141.461046] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [141.461116] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [141.461181] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [141.461248] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [141.461314] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [141.461376] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [141.461437] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [141.461511] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [141.461578] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [141.461642] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [141.461701] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [141.462257] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [141.462671] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [141.462779] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [141.464152] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [141.473472] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [141.473900] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [141.473996] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [141.474073] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [141.474147] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [141.474219] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [141.474292] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [141.474372] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [141.474373] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [141.474374] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [141.474375] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [141.474376] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [141.474377] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [141.474378] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [141.474379] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [141.474382] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [141.474574] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [141.474708] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [141.474832] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [141.474953] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [141.475970] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [141.476071] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [141.476167] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [141.476262] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [141.476350] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [141.476434] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [141.476525] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [141.476608] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [141.476693] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [141.476774] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [141.476853] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [141.476930] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [141.477007] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [141.477086] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [141.477165] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [141.477241] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [141.477316] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [141.477389] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [141.477459] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [141.477544] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [141.477615] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [141.477683] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [141.477752] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [141.477825] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [141.477901] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [141.477976] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [141.478064] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [141.478150] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [141.478359] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [141.478443] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [141.478547] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [141.478755] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [141.478840] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [141.478919] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [141.479135] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [141.479213] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [141.479289] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [141.479701] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [141.482584] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [141.482676] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [141.482757] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [141.482836] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [141.482912] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [141.482989] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [141.483063] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [141.483133] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [141.483200] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [141.483267] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [141.483333] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [141.483399] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [141.483469] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [141.483534] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [141.483624] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [141.483717] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [141.484335] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [141.503538] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [141.504484] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [141.514473] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [141.514795] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [141.515324] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [141.515414] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [141.516805] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [141.516900] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [141.522857] Creating 4 MTD partitions on "xe.nvm.768":
<5> [141.522868] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [141.529262] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [141.534757] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [141.538526] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [141.546068] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [141.546186] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [141.546406] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [141.546457] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [141.546711] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [141.546805] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [141.546900] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [141.548702] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [141.548834] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [141.548958] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [141.549074] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [141.549176] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [141.549269] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [141.549362] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [141.549453] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [141.549651] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [141.549739] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [141.549824] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [141.549910] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [141.549996] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [141.550086] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [141.550176] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [141.550264] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [141.550347] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [141.550430] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [141.550528] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [141.550620] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [141.550951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [141.551075] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<6> [141.551059] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [141.551181] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [141.551316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [141.551425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [141.551571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [141.551677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [141.552108] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [141.552276] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [141.552425] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [141.552606] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [141.554594] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [141.555442] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [141.557158] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [141.557274] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [141.558237] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [141.558347] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [141.559580] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [141.560958] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [141.561050] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [141.561803] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [141.561867] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [141.562420] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [141.562495] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [141.563271] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [141.563959] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [141.563999] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [141.564274] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [141.564300] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [141.564620] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [141.564742] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [141.565056] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [141.566294] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [141.566403] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [141.566543] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [141.566634] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [141.566718] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [141.566956] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [141.567605] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [141.571121] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.571248] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [141.575382] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.575494] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [141.575636] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [141.579140] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [141.579166] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [141.580496] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [141.582822] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [141.582842] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [141.583940] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [141.586204] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [141.594494] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [141.595360] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [141.599067] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [141.599087] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [141.599188] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff888121244800 (2)
<7> [141.601013] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121244800 (1)
<7> [141.601025] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [141.601160] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [141.601280] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [141.601391] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.601527] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [141.602395] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888121244800 (2)
<7> [141.602407] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [141.602457] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [141.602607] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [141.602864] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [141.602973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [141.602977] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [141.603079] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [141.604284] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [141.604287] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [141.604387] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.604495] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [141.608607] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.608706] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [141.612855] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.612999] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [141.617122] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [141.617428] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [141.617577] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [141.617586] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [141.621779] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [141.621790] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [141.621797] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [141.625992] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [141.626000] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [141.626006] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [141.639040] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.653626] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [141.653781] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [141.654306] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [141.679760] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.691669] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [141.717982] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.750943] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.751912] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [141.752005] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [141.784957] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.817957] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.818005] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [141.818062] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [141.818563] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [141.850957] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.884541] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.886499] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [141.886577] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [141.918960] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.951957] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [141.952610] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [141.985958] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [142.017957] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [142.018000] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [142.018048] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [142.019148] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [142.019234] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121244800 (1)
<7> [142.019648] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [142.025318] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [142.026457] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [142.027651] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [142.028140] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [142.028615] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [142.029111] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [142.029138] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [142.029155] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [142.030524] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [142.030989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [142.032096] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [142.032530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [142.032544] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.032969] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [142.034593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [142.034605] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [142.035010] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [142.035030] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [142.035046] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [142.039457] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [142.039499] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [142.039515] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [142.044082] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [142.044102] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [142.044118] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [142.048719] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [142.048738] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [142.048749] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [142.048759] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [142.048767] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [142.048775] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [142.048783] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [142.048791] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [142.048799] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [142.048910] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [142.048946] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [142.049044] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [142.049069] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [142.050867] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [142.051485] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [142.052049] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [142.052536] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [142.052974] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [142.053366] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [142.053777] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [142.054143] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [142.054506] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [142.054838] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [142.055152] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [142.055483] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [142.055782] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [142.056060] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [142.056322] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [142.056614] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [142.056892] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [142.057147] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [142.057381] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [142.057632] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [142.057855] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [142.058061] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [142.058312] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [142.058647] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [142.058737] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [142.059112] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [142.059302] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [142.059318] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [142.059424] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [142.059765] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [142.064015] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [142.064025] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [142.064031] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [142.068218] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [142.068225] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [142.068230] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<6> [142.069131] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [142.069613] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [142.069916] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [142.069960] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [142.070281] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [142.070384] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [142.070411] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [142.070510] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [142.071165] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [142.072497] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [142.072521] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [142.073251] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [142.074241] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [142.074475] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [142.078991] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [142.079489] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [142.080011] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [142.080144] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [142.080273] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [142.080403] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [142.080412] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [142.080418] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [142.080883] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [142.081014] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [142.081396] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [142.081534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [142.081539] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [142.081661] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [142.082858] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [142.082864] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [142.082991] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [142.082998] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [142.083004] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [142.087167] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [142.087177] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [142.087183] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [142.091340] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [142.091347] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [142.091351] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [142.095469] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [142.095474] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [142.095481] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [142.095483] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [142.095485] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [142.095487] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [142.095488] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [142.095490] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [142.095492] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [142.095607] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [142.095622] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [142.095648] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [142.095658] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [142.095661] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [142.095675] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [142.132528] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [142.133113] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [142.133675] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [142.134136] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [142.134644] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [143.096829] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [143.097424] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [143.098080] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [143.098880] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [143.099615] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [143.100176] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [143.101534] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [143.101862] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [143.102155] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [143.102315] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [143.104112] Deleting MTD partitions on "xe.nvm.768":
<6> [143.104124] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [143.106974] Deleting xe.nvm.768.GSC MTD partition
<6> [143.108293] Deleting xe.nvm.768.OptionROM MTD partition
<6> [143.111023] Deleting xe.nvm.768.DAM MTD partition
<7> [143.116142] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [143.116547] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [143.117891] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [143.118287] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [143.118671] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [143.120201] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [143.120633] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [143.156881] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [143.158962] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [143.159270] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [143.178412] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [143.180877] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [143.261611] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [143.261550] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [143.265327] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [143.332290] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [143.334137] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121244800 (0)
<7> [143.339200] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff888121244800 (0)
<7> [143.345197] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [143.890604] Setting dangerous option force_probe - tainting kernel
<6> [143.893393] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [143.894617] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [143.894877] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [143.894887] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [143.895002] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [143.895092] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [143.895187] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [143.896595] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [143.896622] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [143.896624] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [143.896626] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [143.896627] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [143.938177] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [143.938385] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [143.938524] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [143.938670] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [143.938781] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [143.938874] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [143.938968] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [143.939070] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [143.939166] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [143.939254] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [143.939338] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [143.939436] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [143.939540] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [143.939679] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [143.939776] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [143.940595] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [143.953963] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [143.954066] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [143.954158] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [143.954246] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [143.954337] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [143.954429] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [143.954536] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [143.954674] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [143.954755] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [143.954847] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [143.954931] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [143.955017] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [143.955105] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [143.955191] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [143.955275] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [143.955356] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [143.955436] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [143.955529] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [143.955671] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [143.955765] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [143.955853] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [143.955935] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [143.956016] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [143.956097] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [143.956176] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [143.956257] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [143.956344] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [143.956427] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [143.956522] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [143.956652] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [143.956777] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [143.956927] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [143.957052] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [143.957218] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [143.957387] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [143.957494] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [143.957616] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [143.957738] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [143.957846] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [143.957973] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [143.958076] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [143.958173] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [143.958648] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [143.959199] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [143.959321] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [143.959426] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [143.959555] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [143.959669] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [143.959706] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [143.959771] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [143.959841] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [143.959872] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [143.959954] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [143.959965] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [143.960056] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [143.960054] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [143.960146] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [143.960145] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [143.960230] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [143.960234] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [143.960312] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [143.960324] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [143.960398] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [143.960415] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [143.960499] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [143.960523] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [143.960585] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [143.960668] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [143.960666] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [143.960750] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [143.960768] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [143.960839] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [143.960867] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [143.960962] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [143.960978] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [143.961055] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [143.961107] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [143.961145] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [143.961235] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [143.961233] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [143.961325] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [143.961369] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [143.961419] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [143.961512] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [143.961518] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [143.961649] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [143.961749] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [143.961858] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [143.961962] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [143.962053] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [143.962142] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [143.966111] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [143.971038] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [143.971171] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [143.971274] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [143.971513] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [143.972000] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<6> [143.972292] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [143.972497] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [143.972612] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [143.972844] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [143.972960] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [143.973259] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [143.973359] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [143.973595] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [143.973706] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [143.973881] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [143.974006] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [143.974300] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [143.974402] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [143.974730] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [143.974867] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [143.975001] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [143.975131] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [143.975229] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [143.975333] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [143.975432] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [143.975539] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [143.975645] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [143.975738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [143.975826] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [143.975920] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [143.976015] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [143.976107] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [143.976201] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [143.976296] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [143.976386] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [143.976483] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [143.976584] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [143.976673] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [143.976753] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [143.976833] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [143.976910] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [143.976988] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [143.977064] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [143.977140] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [143.977219] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [143.977304] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [143.977389] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [143.977476] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [143.977574] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [143.977659] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [143.977737] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [143.977818] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [143.977897] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [143.977976] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [143.978053] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [143.978129] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [143.978216] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [143.978299] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [143.978376] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [143.978453] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [143.978547] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [143.978642] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [143.978737] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [143.978828] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [143.978911] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [143.978992] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [143.979073] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [143.979152] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [143.979229] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [143.979304] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [143.979379] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [143.979470] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [143.979572] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [143.979661] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [143.979738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [143.979818] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [143.979898] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [143.979976] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [143.980056] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [143.980138] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [143.980220] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [143.980303] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [143.980387] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [143.980539] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [143.980626] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [143.980716] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [143.980810] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [143.980894] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [143.980971] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [143.981047] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [143.981123] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [143.981199] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [143.981275] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [143.981359] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [143.981453] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [143.981561] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [143.981671] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [143.981762] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [143.981876] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [143.981983] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [143.982090] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [143.982221] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [143.982358] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [143.982467] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [143.982615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [143.982716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [143.984278] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [143.986201] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [143.986300] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [143.986376] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [143.986444] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [143.986527] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [143.986596] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [143.986664] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [143.986725] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [143.986783] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [143.986843] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [143.986901] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [143.986958] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [143.987015] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [143.987073] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [143.987132] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [143.987233] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [143.988704] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [143.993470] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [143.994853] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [143.995577] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [143.995842] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [143.995933] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [143.996015] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [143.996103] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [143.996185] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [144.084338] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [144.084341] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [144.084534] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [144.084647] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [144.084746] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [144.084836] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [144.084957] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [144.085061] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [144.085181] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [144.085252] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [144.085326] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [144.085396] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [144.085543] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [144.085622] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [144.085696] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [144.085772] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [144.086824] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [144.086905] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [144.086984] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [144.087059] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [144.087131] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [144.087210] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [144.087289] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [144.087365] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [144.087441] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [144.087531] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [144.087610] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [144.087685] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [144.087758] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [144.087827] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [144.087894] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [144.087962] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [144.088027] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [144.088092] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [144.088156] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [144.088223] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [144.088287] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [144.088352] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [144.088417] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [144.088497] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [144.088575] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [144.088649] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [144.088728] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [144.088802] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [144.088871] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [144.088946] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [144.089016] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [144.089084] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [144.089153] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [144.089224] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [144.089295] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [144.089363] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [144.089430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [144.089508] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [144.089590] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [144.089674] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [144.089752] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [144.089824] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [144.089966] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [144.090050] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [144.090130] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [144.090197] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [144.090331] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [144.090400] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [144.090471] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [144.090545] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [144.090673] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [144.090741] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [144.090808] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [144.090873] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [144.090939] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [144.091005] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [144.091077] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [144.091226] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [144.091296] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [144.091364] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [144.091430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [144.091515] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [144.091589] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [144.091658] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [144.091980] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [144.094393] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [144.094483] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [144.094571] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [144.094639] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [144.094706] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [144.094772] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [144.094836] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [144.094900] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [144.094962] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [144.095023] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [144.095085] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [144.095148] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [144.095207] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [144.095268] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [144.095352] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [144.095521] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [144.095953] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [144.097050] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [144.098058] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [144.118762] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [144.119803] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [144.124470] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [144.125841] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [144.126118] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [144.126808] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [144.126907] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [144.126987] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [144.127060] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [144.127134] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [144.127207] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [144.127279] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [144.127358] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [144.127438] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [144.129877] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [144.129986] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [144.130075] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [144.131762] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [144.131897] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [144.134902] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [144.136032] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [144.138149] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [144.138247] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [144.138335] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [144.138416] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [144.138517] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [144.138596] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [144.138676] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [144.138753] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [144.138827] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [144.138899] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [144.138969] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [144.139039] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [144.139108] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [144.139177] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [144.139794] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [144.140245] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [144.140363] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [144.141804] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [144.151472] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [144.151793] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [144.151890] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [144.151969] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [144.152045] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [144.152119] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [144.152191] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [144.152268] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [144.152270] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [144.152271] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [144.152272] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [144.152273] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [144.152274] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [144.152275] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [144.152276] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [144.152279] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [144.152411] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [144.152575] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [144.152702] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [144.152817] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [144.153848] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [144.153954] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [144.154050] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [144.154141] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [144.154226] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [144.154309] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [144.154389] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [144.154481] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [144.154572] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [144.154654] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [144.154734] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [144.154809] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [144.154882] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [144.154953] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [144.155024] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [144.155095] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [144.155165] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [144.155234] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [144.155304] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [144.155373] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [144.155444] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [144.155531] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [144.155601] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [144.155670] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [144.155738] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [144.155807] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [144.155897] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [144.155984] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [144.156206] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [144.156290] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [144.156370] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [144.156585] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [144.156665] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [144.156742] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [144.156960] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [144.157037] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [144.157113] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [144.157535] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [144.160595] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [144.160692] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [144.160777] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [144.160858] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [144.160935] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [144.161009] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [144.161080] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [144.161152] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [144.161224] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [144.161295] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [144.161364] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [144.161432] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [144.161512] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [144.161578] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [144.161667] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [144.161764] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [144.162409] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [144.181804] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [144.182890] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [144.192471] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [144.192795] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [144.193270] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [144.193369] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [144.194768] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [144.194861] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [144.202085] Creating 4 MTD partitions on "xe.nvm.768":
<5> [144.202096] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [144.207673] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [144.211678] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [144.221260] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [144.229918] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [144.230622] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [144.231713] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [144.231801] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [144.232127] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [144.232486] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [144.232787] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [144.234649] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [144.234852] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [144.235129] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [144.235655] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [144.235995] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [144.236329] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [144.236686] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [144.237007] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [144.237323] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [144.237527] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<6> [144.237553] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [144.237633] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [144.237818] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [144.238015] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [144.238113] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [144.238210] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [144.238310] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [144.238415] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [144.238519] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [144.238623] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [144.238722] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [144.239046] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [144.239174] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [144.239282] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [144.239412] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [144.239620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [144.239720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [144.239816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [144.240246] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [144.240421] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [144.240721] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [144.240863] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [144.242621] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [144.243202] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [144.246322] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [144.246408] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [144.248128] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [144.248362] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [144.249556] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [144.251212] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [144.251282] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [144.252632] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [144.252807] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [144.253824] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [144.253870] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [144.254304] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [144.255587] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [144.255631] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [144.255925] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [144.255953] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [144.256266] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [144.256389] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [144.256738] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [144.257957] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [144.258299] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [144.258410] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [144.258518] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [144.258611] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [144.258699] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [144.258885] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [144.262138] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.262276] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [144.266408] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.266528] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [144.266675] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [144.270075] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.270097] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.271191] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [144.273495] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.273522] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.274509] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [144.276954] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [144.285492] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [144.286331] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [144.290287] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.290305] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.290401] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff888121244800 (2)
<7> [144.292186] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121244800 (1)
<7> [144.292196] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [144.292326] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [144.292439] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [144.292596] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.292710] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [144.293563] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888121244800 (2)
<7> [144.293577] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [144.293631] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [144.293793] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [144.294053] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [144.294155] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [144.294159] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [144.294265] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [144.295480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [144.295484] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [144.295597] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.295701] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [144.299814] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.299921] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [144.304060] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.304206] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [144.308338] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [144.308689] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [144.308940] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [144.308949] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [144.313226] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [144.313235] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [144.313240] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [144.317389] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [144.317397] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [144.317401] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [144.330476] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.332479] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [144.368185] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [144.369759] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.405505] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.437926] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.438863] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.438938] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.471096] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.502948] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.502997] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [144.503061] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [144.503568] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [144.537324] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.569954] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.571415] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.571502] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.603953] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.635952] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.636556] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [144.669953] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.702952] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [144.702998] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [144.703054] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [144.703128] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [144.703209] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121244800 (1)
<7> [144.704554] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [144.710028] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [144.711102] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [144.712159] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [144.712688] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [144.713121] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [144.713539] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [144.713563] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [144.713580] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [144.714676] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [144.715051] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [144.715904] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [144.716244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [144.716254] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [144.716571] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [144.717927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [144.717932] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [144.718144] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [144.718154] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [144.718162] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [144.722406] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [144.722415] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [144.722423] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [144.726711] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [144.726720] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [144.726728] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [144.730988] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [144.730998] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [144.731005] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [144.731010] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [144.731014] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [144.731018] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [144.731022] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [144.731026] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [144.731030] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [144.731080] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [144.731098] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [144.731148] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [144.731164] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [144.732326] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [144.732252] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [144.732529] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [144.732823] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [144.732760] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [144.732840] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [144.732963] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [144.733150] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [144.733343] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [144.733537] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [144.733702] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [144.733865] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [144.734026] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [144.734181] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [144.734335] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [144.734495] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [144.734647] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [144.734793] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [144.734934] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [144.735071] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [144.735207] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [144.735352] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [144.735502] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [144.735635] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [144.735767] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [144.736023] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [144.736213] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [144.736375] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [144.736530] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [144.736672] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [144.737137] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [144.737145] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [144.737149] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [144.741302] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [144.741307] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [144.741311] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [144.743378] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.743401] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.744132] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<6> [144.745715] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [144.745795] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [144.745812] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [144.746285] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [144.746380] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [144.746769] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [144.746813] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [144.747158] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [144.747364] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [144.747467] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [144.752037] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [144.752140] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [144.752588] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [144.753211] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [144.753415] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [144.753594] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [144.753723] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [144.753731] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [144.753736] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [144.754188] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [144.754331] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [144.754763] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [144.754898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [144.754903] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [144.755023] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [144.756207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [144.756211] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [144.756325] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [144.756331] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [144.756336] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [144.760467] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [144.760472] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [144.760476] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [144.764607] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [144.764611] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [144.764615] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [144.768711] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [144.768715] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [144.768722] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [144.768724] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [144.768726] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [144.768728] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [144.768729] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [144.768731] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [144.768732] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [144.768855] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [144.768869] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [144.768893] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [144.768903] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [144.768905] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [144.768956] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [144.812610] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [144.814295] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [144.814933] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [144.815519] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [144.816089] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [145.771388] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [145.772044] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [145.772653] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [145.773512] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [145.774351] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [145.774957] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [145.775378] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [145.775519] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [145.775645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [145.775791] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [145.778326] Deleting MTD partitions on "xe.nvm.768":
<6> [145.778342] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [145.781624] Deleting xe.nvm.768.GSC MTD partition
<6> [145.784283] Deleting xe.nvm.768.OptionROM MTD partition
<6> [145.785086] Deleting xe.nvm.768.DAM MTD partition
<7> [145.789402] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [145.789784] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [145.790976] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [145.791367] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [145.791758] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [145.793006] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [145.793417] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [145.820329] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [145.821835] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [145.821919] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [145.831037] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [145.832544] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [145.905554] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [145.909557] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [145.925626] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [145.996371] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [145.998686] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888121244800 (0)
<7> [146.001752] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff888121244800 (0)
<7> [146.001840] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [146.553689] Setting dangerous option force_probe - tainting kernel
<6> [146.556504] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [146.557616] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [146.557806] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [146.557814] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [146.557930] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [146.558022] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [146.558121] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [146.559504] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [146.559530] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [146.559532] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [146.559534] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [146.559535] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [146.596300] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [146.596555] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [146.596688] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [146.596795] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [146.596901] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [146.596994] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [146.597087] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [146.597187] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [146.597279] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [146.597371] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [146.597467] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [146.597574] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [146.597670] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [146.597758] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [146.597849] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [146.598316] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [146.611647] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [146.611752] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [146.611851] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [146.611943] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [146.612034] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [146.612123] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [146.612211] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [146.612299] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [146.612390] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [146.612500] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [146.612599] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [146.612697] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [146.612791] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [146.612886] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [146.612976] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [146.613062] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [146.613150] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [146.613237] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [146.613327] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [146.613415] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [146.613513] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [146.613604] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [146.613690] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [146.613785] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [146.613877] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [146.613964] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [146.614050] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [146.614136] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [146.614225] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [146.614322] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [146.614444] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [146.614605] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [146.614732] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [146.614893] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [146.615070] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [146.615170] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [146.615266] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [146.615386] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [146.615502] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [146.615621] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [146.615719] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [146.615821] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [146.616288] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [146.616836] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [146.616949] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [146.617050] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [146.617142] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [146.617235] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [146.617324] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [146.617427] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [146.617523] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [146.617653] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [146.617792] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [146.617884] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [146.617928] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [146.618066] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [146.618082] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [146.618232] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [146.618242] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [146.618391] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [146.618397] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [146.618566] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [146.618574] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [146.618727] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [146.618739] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [146.618886] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [146.618900] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [146.619040] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [146.619057] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [146.619197] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [146.619220] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [146.619349] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [146.619380] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [146.619509] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [146.619553] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [146.619658] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [146.619710] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [146.619807] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [146.619875] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [146.619955] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [146.620040] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [146.620110] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [146.620203] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [146.620263] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [146.620368] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [146.620417] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [146.620545] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [146.620577] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [146.620704] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [146.620854] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [146.620994] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [146.631080] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [146.632869] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [146.635936] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [146.636063] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [146.636164] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [146.636274] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [146.636404] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [146.636936] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [146.637051] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [146.637277] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [146.637404] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [146.637717] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [146.637816] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [146.637997] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [146.638091] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [146.638259] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [146.638384] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [146.638679] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [146.638780] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [146.639073] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [146.639221] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [146.639357] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [146.639493] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [146.639591] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [146.639686] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [146.639778] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [146.639867] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [146.639955] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [146.640044] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [146.640134] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [146.640230] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [146.640324] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [146.640414] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [146.640552] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [146.640640] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [146.640726] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [146.640812] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [146.640899] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [146.640985] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [146.641074] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [146.641162] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [146.641248] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [146.641335] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [146.641429] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [146.641932] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [146.642027] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [146.642118] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [146.642215] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [146.642306] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [146.642397] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [146.642492] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [146.642579] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [146.642668] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [146.642754] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [146.642837] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [146.642920] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [146.643005] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [146.643091] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [146.643178] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [146.643263] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [146.643347] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [146.643430] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [146.643520] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [146.643617] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [146.643712] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [146.643805] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [146.643895] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [146.643984] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [146.644073] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [146.644161] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [146.644245] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [146.644328] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [146.644415] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [146.644510] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [146.644598] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [146.644682] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [146.644765] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [146.644847] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [146.644929] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [146.645012] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [146.645095] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [146.645188] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [146.645279] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [146.645367] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [146.645455] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [146.645577] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [146.645669] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [146.645757] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [146.645844] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [146.645929] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [146.646015] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [146.646100] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [146.646183] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [146.646266] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [146.646351] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [146.646454] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [146.646563] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [146.646654] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [146.646743] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [146.646854] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [146.646972] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [146.647082] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [146.647206] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [146.647339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [146.647441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [146.647550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [146.647646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [146.649363] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [146.651306] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [146.651408] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [146.651501] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [146.651579] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [146.651651] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [146.651722] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [146.651791] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [146.651857] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [146.651923] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [146.651989] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [146.652055] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [146.652121] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [146.652187] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [146.652257] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [146.652323] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [146.652435] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [146.653931] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [146.658465] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [146.659836] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [146.660070] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [146.660713] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [146.660948] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [146.661033] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [146.661109] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [146.661183] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [146.661255] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [146.745769] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [146.745771] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [146.745902] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [146.745998] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [146.746091] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [146.746177] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [146.746295] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [146.746409] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [146.746565] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [146.746644] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [146.746723] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [146.746804] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [146.746933] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [146.747007] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [146.747080] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [146.747153] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [146.748221] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [146.748308] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [146.748395] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [146.748481] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [146.748561] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [146.748641] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [146.748716] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [146.748791] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [146.748868] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [146.748942] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [146.749019] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [146.749093] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [146.749165] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [146.749233] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [146.749299] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [146.749365] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [146.749429] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [146.749513] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [146.749585] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [146.749650] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [146.749715] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [146.749782] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [146.749851] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [146.749919] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [146.749985] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [146.750049] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [146.750127] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [146.750201] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [146.750273] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [146.750344] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [146.750412] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [146.750486] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [146.750567] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [146.750642] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [146.750718] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [146.750792] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [146.750863] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [146.750931] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [146.751005] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [146.751079] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [146.751154] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [146.751224] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [146.751360] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [146.751428] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [146.751507] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [146.751582] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [146.751722] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [146.751794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [146.751864] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [146.751931] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [146.752056] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [146.752130] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [146.752199] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [146.752265] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [146.752330] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [146.752393] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [146.752461] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [146.752613] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [146.752686] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [146.752752] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [146.752816] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [146.752880] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [146.752943] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [146.753006] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [146.753325] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [146.755735] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [146.755817] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [146.755890] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [146.755958] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [146.756025] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [146.756089] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [146.756152] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [146.756218] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [146.756282] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [146.756345] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [146.756405] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [146.756472] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [146.756539] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [146.756604] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [146.756689] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [146.756839] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [146.757249] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [146.758214] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [146.759202] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [146.779096] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [146.780139] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [146.784464] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [146.785828] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [146.786056] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 5ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [146.786321] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [146.786943] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [146.787034] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [146.787105] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [146.787171] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [146.787239] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [146.787304] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [146.787368] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [146.787433] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [146.787513] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [146.789790] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [146.789878] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [146.789951] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [146.791739] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [146.791826] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [146.795115] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [146.796222] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [146.798307] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [146.798406] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [146.798500] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [146.798581] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [146.798658] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [146.798737] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [146.798815] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [146.798887] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [146.798957] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [146.799025] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [146.799093] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [146.799159] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [146.799223] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [146.799287] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [146.799897] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [146.800326] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [146.800441] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [146.801925] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [146.811468] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [146.811790] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [146.811889] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [146.811970] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [146.812049] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [146.812123] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [146.812197] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [146.812274] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [146.812275] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [146.812276] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [146.812277] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [146.812278] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [146.812279] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [146.812280] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [146.812281] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [146.812285] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [146.812419] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [146.812566] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [146.812691] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [146.812809] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [146.813793] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [146.813899] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [146.813993] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [146.814083] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [146.814169] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [146.814256] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [146.814336] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [146.814419] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [146.814514] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [146.814596] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [146.814677] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [146.814751] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [146.814824] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [146.814895] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [146.814966] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [146.815034] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [146.815103] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [146.815178] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [146.815253] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [146.815329] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [146.815401] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [146.815476] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [146.815546] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [146.815614] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [146.815681] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [146.815750] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [146.815838] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [146.815921] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [146.816132] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [146.816210] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [146.816285] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [146.816484] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [146.816571] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [146.816654] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [146.816872] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [146.816952] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [146.817030] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [146.817434] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [146.820470] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [146.820560] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [146.820641] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [146.820718] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [146.820792] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [146.820863] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [146.820933] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [146.821002] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [146.821071] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [146.821138] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [146.821209] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [146.821280] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [146.821350] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [146.821419] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [146.821522] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [146.821619] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [146.822229] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [146.841556] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [146.842648] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [146.852478] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [146.852805] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [146.853255] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [146.853351] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [146.854655] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [146.854748] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [146.862318] Creating 4 MTD partitions on "xe.nvm.768":
<5> [146.862330] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [146.867986] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [146.875326] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [146.879884] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [146.888740] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [146.888922] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [146.889214] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [146.889265] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [146.889374] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [146.889557] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [146.889647] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [146.890333] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [146.890463] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [146.890569] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [146.890667] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [146.890756] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [146.890846] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [146.890931] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [146.891018] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [146.891107] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [146.891194] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [146.891287] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [146.891379] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [146.891473] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [146.891561] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [146.891647] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [146.891732] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [146.891816] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [146.891898] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [146.891980] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [146.892062] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [146.892340] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<6> [146.892359] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [146.892455] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [146.892572] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [146.892699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [146.892803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [146.892904] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [146.893002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [146.893419] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [146.893908] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [146.894058] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [146.894200] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [146.896560] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [146.897911] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [146.899771] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [146.899872] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [146.901485] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [146.901595] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [146.903027] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [146.905206] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [146.905277] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [146.905827] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [146.905894] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [146.906400] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [146.906491] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [146.906935] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [146.907544] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [146.907581] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [146.907860] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [146.907886] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [146.908204] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [146.908330] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [146.909050] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [146.910284] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [146.910668] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [146.910777] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [146.910875] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [146.910966] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [146.911055] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [146.911239] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [146.914450] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.914828] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [146.918954] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.919058] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [146.919203] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [146.923056] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [146.923081] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [146.924242] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [146.926489] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [146.926506] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [146.927489] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [146.929717] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [146.938026] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [146.939165] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [146.942810] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [146.942828] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [146.942922] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff8881212458a0 (2)
<7> [146.944730] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881212458a0 (1)
<7> [146.944740] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [146.944862] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [146.944966] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [146.945070] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.945181] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [146.945767] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881212458a0 (2)
<7> [146.945779] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [146.945829] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [146.945980] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [146.946321] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [146.946448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [146.946453] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [146.946569] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [146.947791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [146.947794] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [146.947891] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.947986] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [146.952099] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.952207] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [146.956347] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.956493] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [146.960613] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [146.960987] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [146.961416] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [146.961426] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [146.965647] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [146.965654] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [146.965658] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [146.969819] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [146.969827] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [146.969833] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [146.982325] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [146.997483] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [147.021755] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.037416] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [147.058818] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.090954] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.091910] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [147.091995] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [147.123943] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.156953] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.157000] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [147.157058] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [147.157567] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [147.191727] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.224953] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.226413] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [147.226504] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [147.260325] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.294539] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.295123] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [147.328953] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.363632] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [147.363675] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [147.363728] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [147.363820] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [147.363898] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881212458a0 (1)
<7> [147.365217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [147.370842] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [147.371961] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [147.373065] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [147.373631] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [147.374073] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [147.374486] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [147.374512] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [147.374529] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [147.375170] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [147.375604] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [147.376642] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [147.376959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [147.376970] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [147.377278] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [147.378708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [147.378715] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [147.378948] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [147.378963] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [147.378971] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [147.383214] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [147.383224] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [147.383232] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [147.387551] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [147.387560] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [147.387568] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [147.391828] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [147.391837] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [147.391843] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [147.391848] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [147.391853] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [147.391857] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [147.391861] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [147.391865] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [147.391869] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [147.391919] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [147.391937] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [147.391992] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [147.392008] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [147.393145] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [147.393071] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [147.393348] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [147.393672] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [147.393611] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [147.393688] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [147.393818] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [147.394021] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [147.394208] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [147.394390] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [147.394582] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [147.394757] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [147.394926] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [147.395096] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [147.395258] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [147.395411] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [147.395575] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [147.395721] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [147.395863] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [147.396002] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [147.396139] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [147.396272] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [147.396403] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [147.396546] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [147.396681] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [147.396953] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [147.397134] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [147.397293] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [147.397441] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [147.397599] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [147.398000] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [147.398007] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [147.398012] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [147.402169] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [147.402175] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [147.402179] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [147.404310] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [147.404361] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [147.404914] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [147.406771] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [147.406815] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [147.407542] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [147.409000] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<6> [147.413088] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [147.413848] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [147.414352] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<6> [147.414639] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [147.414702] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [147.415241] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [147.415290] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [147.415733] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [147.416841] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [147.416966] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [147.417089] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [147.417212] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [147.417218] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [147.417223] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [147.417738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [147.417889] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [147.418301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [147.418428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [147.418433] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [147.418581] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [147.419772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [147.419774] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [147.419882] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [147.419886] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [147.419890] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [147.420968] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [147.424023] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [147.424043] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [147.424060] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [147.428379] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [147.428384] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [147.428388] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [147.432533] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [147.432539] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [147.432547] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [147.432550] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [147.432551] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [147.432553] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [147.432555] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [147.432556] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [147.432558] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [147.432685] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [147.432701] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [147.432727] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [147.432739] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [147.432741] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [147.435527] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [147.476551] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [147.478175] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [147.478834] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [147.479407] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [147.480025] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [148.436751] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [148.437344] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [148.437977] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [148.438675] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [148.439352] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [148.439941] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [148.441271] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [148.441526] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [148.441651] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [148.441799] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [148.442625] Deleting MTD partitions on "xe.nvm.768":
<6> [148.442628] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [148.443239] Deleting xe.nvm.768.GSC MTD partition
<6> [148.446014] Deleting xe.nvm.768.OptionROM MTD partition
<6> [148.448657] Deleting xe.nvm.768.DAM MTD partition
<7> [148.450206] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [148.450517] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [148.451269] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [148.451598] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [148.451899] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [148.453079] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [148.454401] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [148.511552] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [148.513680] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [148.513970] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [148.531220] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [148.533876] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [148.609212] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [148.613835] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [148.617405] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [148.674183] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [148.676115] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881212458a0 (0)
<7> [148.679578] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff8881212458a0 (0)
<7> [148.679784] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<5> [149.248470] Setting dangerous option force_probe - tainting kernel
<6> [149.251276] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [149.252448] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [149.252675] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [149.252685] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [149.252791] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [149.252882] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [149.252978] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [149.254468] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [149.254496] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [149.254497] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [149.254499] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [149.254501] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [149.296234] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [149.296468] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [149.296604] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [149.296715] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [149.296820] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [149.296915] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [149.297007] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [149.297110] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [149.297203] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [149.297292] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [149.297381] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [149.297487] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [149.297590] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [149.297682] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [149.297770] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [149.298609] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [149.311973] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [149.312075] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [149.312165] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [149.312252] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [149.312340] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [149.312423] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [149.312524] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [149.312645] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [149.312742] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [149.312835] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [149.312920] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [149.313003] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [149.313085] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [149.313166] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [149.313255] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [149.313338] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [149.313421] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [149.313513] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [149.313615] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [149.313702] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [149.313785] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [149.313867] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [149.313946] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [149.314027] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [149.314114] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [149.314199] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [149.314279] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [149.314362] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [149.314441] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [149.314541] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [149.314661] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [149.314797] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [149.314908] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [149.315065] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [149.315223] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [149.315311] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [149.315404] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [149.315541] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [149.315643] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [149.315753] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [149.315844] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [149.315935] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [149.316349] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [149.316816] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [149.316976] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [149.316980] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [149.317131] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [149.317135] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [149.317276] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [149.317279] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [149.317419] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [149.317428] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [149.317582] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [149.317594] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [149.317734] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [149.317751] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [149.317878] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [149.317901] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [149.318016] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [149.318043] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [149.318150] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [149.318182] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [149.318285] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [149.318322] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [149.318419] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [149.318475] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [149.318585] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [149.318643] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [149.318732] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [149.318787] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [149.318866] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [149.318931] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [149.319000] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [149.319080] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [149.319140] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [149.319228] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [149.319282] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [149.319381] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [149.319536] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [149.319674] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [149.319780] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [149.319919] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [149.320048] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [149.320189] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [149.320298] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [149.320420] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [149.320569] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [149.320700] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [149.320820] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [149.320952] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [149.321083] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [149.331207] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [149.331646] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [149.334660] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [149.334791] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [149.334901] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [149.335021] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [149.335156] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [149.335599] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [149.335709] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [149.335930] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [149.336050] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [149.336333] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [149.336438] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [149.336630] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [149.336723] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [149.336887] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [149.337007] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [149.337292] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [149.337386] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [149.337701] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [149.337862] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [149.337997] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [149.338126] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [149.338217] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [149.338306] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [149.338394] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [149.338501] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [149.338592] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [149.338682] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [149.338772] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [149.338859] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [149.338947] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [149.339034] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [149.339119] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [149.339210] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [149.339308] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [149.339400] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [149.339502] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [149.339590] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [149.339677] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [149.339764] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [149.339851] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [149.339937] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [149.340025] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [149.340118] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [149.340212] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [149.340301] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [149.340389] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [149.340481] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [149.340564] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [149.340650] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [149.340745] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [149.340840] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [149.340928] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [149.341015] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [149.341101] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [149.341186] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [149.341273] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [149.341360] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [149.341444] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [149.341549] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [149.341640] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [149.341726] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [149.341820] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [149.341907] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [149.342002] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [149.342097] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [149.342190] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [149.342282] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [149.342372] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [149.342465] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [149.342556] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [149.342646] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [149.342730] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [149.342813] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [149.342897] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [149.342988] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [149.343075] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [149.343163] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [149.343254] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [149.343342] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [149.343427] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [149.343522] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [149.343605] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [149.343686] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [149.343766] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [149.343846] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [149.343926] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [149.344010] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [149.344094] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [149.344178] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [149.344260] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [149.344342] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [149.344424] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [149.344516] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [149.344613] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [149.344706] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [149.344797] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [149.344887] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [149.344997] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [149.345094] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [149.345185] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [149.345305] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [149.345437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [149.345577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [149.345676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [149.345772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [149.347434] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [149.349425] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [149.349542] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [149.349626] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [149.349702] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [149.349773] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [149.349841] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [149.349908] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [149.349975] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [149.350040] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [149.350108] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [149.350171] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [149.350234] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [149.350296] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [149.350360] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [149.350424] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [149.350549] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [149.352049] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [149.356465] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [149.357844] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [149.358246] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [149.358882] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [149.359133] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [149.359221] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [149.359300] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [149.359375] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [149.359452] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [149.445332] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [149.445334] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [149.445536] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [149.445645] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [149.445741] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [149.445824] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [149.445961] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [149.446070] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [149.446199] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [149.446275] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [149.446352] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [149.446425] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [149.446685] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [149.446800] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [149.446893] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [149.446973] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [149.448072] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [149.448165] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [149.448254] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [149.448334] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [149.448412] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [149.448518] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [149.448601] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [149.448679] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [149.448758] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [149.448837] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [149.448910] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [149.448980] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [149.449048] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [149.449115] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [149.449181] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [149.449247] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [149.449313] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [149.449378] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [149.449446] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [149.449540] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [149.449615] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [149.449686] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [149.449757] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [149.449823] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [149.449889] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [149.449953] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [149.450033] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [149.450110] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [149.450187] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [149.450263] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [149.450337] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [149.450407] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [149.450485] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [149.450577] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [149.450658] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [149.450731] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [149.450804] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [149.450874] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [149.450949] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [149.451022] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [149.451096] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [149.451167] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [149.451317] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [149.451406] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [149.451490] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [149.451568] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [149.451709] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [149.451779] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [149.451849] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [149.451917] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [149.452042] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [149.452112] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [149.452186] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [149.452261] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [149.452335] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [149.452405] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [149.452479] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [149.452635] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [149.452715] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [149.452789] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [149.452861] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [149.452932] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [149.452999] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [149.453065] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [149.453392] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [149.455833] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [149.455921] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [149.455995] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [149.456064] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [149.456129] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [149.456197] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [149.456262] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [149.456326] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [149.456389] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [149.456450] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [149.456531] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [149.456611] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [149.456681] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [149.456744] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [149.456825] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [149.456985] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [149.457392] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [149.458438] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [149.459446] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [149.480858] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [149.481938] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [149.486464] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [149.487836] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 5ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [149.488113] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [149.488773] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [149.488880] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [149.488964] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [149.489041] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [149.489118] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [149.489192] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [149.489264] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [149.489337] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [149.489414] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [149.491422] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [149.491518] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [149.491600] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [149.493321] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [149.493409] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [149.497272] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [149.498423] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [149.500546] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [149.500649] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [149.500738] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [149.500821] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [149.500897] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [149.500969] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [149.501041] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [149.501111] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [149.501179] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [149.501247] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [149.501315] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [149.501385] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [149.501462] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [149.501532] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [149.502119] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [149.502550] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [149.502673] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [149.504148] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [149.513467] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [149.513896] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [149.514091] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [149.514259] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [149.514417] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [149.514601] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [149.514758] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [149.514917] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [149.514921] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [149.514923] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [149.514926] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [149.514928] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [149.514930] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [149.514932] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [149.514935] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [149.514939] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [149.515227] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [149.515592] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [149.515901] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [149.516190] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [149.518469] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [149.518685] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [149.518879] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [149.519069] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [149.519248] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [149.519428] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [149.519623] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [149.519796] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [149.519974] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [149.520146] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [149.520306] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [149.520466] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [149.520617] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [149.520774] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [149.520923] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [149.521063] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [149.521201] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [149.521329] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [149.521467] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [149.521591] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [149.521716] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [149.521835] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [149.521951] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [149.522069] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [149.522191] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [149.522310] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [149.522464] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [149.522601] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [149.522892] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [149.523019] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [149.523151] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [149.523418] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [149.523547] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [149.523659] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [149.523939] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [149.524062] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [149.524178] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [149.524746] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [149.527844] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [149.527934] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [149.528011] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [149.528086] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [149.528156] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [149.528226] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [149.528292] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [149.528359] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [149.528426] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [149.528506] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [149.528571] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [149.528634] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [149.528698] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [149.528763] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [149.528852] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [149.528950] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [149.529594] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [149.548859] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [149.549946] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [149.559464] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [149.559785] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [149.560267] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [149.560359] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [149.561813] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [149.561909] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [149.569678] Creating 4 MTD partitions on "xe.nvm.768":
<5> [149.569691] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [149.573924] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [149.578923] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [149.583667] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [149.591605] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [149.591733] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [149.592239] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [149.592363] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [149.592631] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [149.592824] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [149.593040] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [149.594543] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [149.594672] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [149.594773] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [149.594865] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [149.594956] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [149.595050] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [149.595142] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [149.595228] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [149.595313] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [149.595398] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [149.595579] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [149.595671] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [149.595758] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [149.595845] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [149.595931] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [149.596016] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [149.596102] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [149.596186] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [149.596271] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [149.596361] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [149.596639] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [149.596770] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [149.596877] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [149.597012] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [149.597121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [149.597221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<6> [149.597212] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [149.597319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<7> [149.597813] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [149.598072] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [149.598374] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [149.598531] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [149.600753] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [149.601966] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [149.603922] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [149.604019] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [149.604807] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [149.604895] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [149.605782] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [149.607244] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [149.607313] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [149.607919] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [149.607977] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [149.608412] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [149.608445] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [149.608969] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [149.609836] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [149.609877] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [149.610175] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [149.610204] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [149.610796] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [149.610921] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<6> [149.611298] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [149.612905] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [149.613325] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [149.613438] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [149.613543] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [149.613633] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [149.613725] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [149.613937] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [149.617059] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.617182] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [149.621332] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.621441] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [149.621601] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [149.625191] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [149.625221] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [149.626355] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [149.628829] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [149.628852] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [149.629976] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [149.632586] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [149.641177] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [149.642120] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [149.645985] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [149.646008] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [149.646132] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff88812245d0c0 (2)
<7> [149.648815] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88812245d0c0 (1)
<7> [149.648830] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [149.649002] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [149.649149] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [149.649296] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.649414] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [149.650238] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88812245d0c0 (2)
<7> [149.650251] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [149.650301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [149.650451] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [149.650744] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [149.650866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [149.650871] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [149.650998] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [149.652228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [149.652231] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [149.652355] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.652487] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [149.656641] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.656739] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [149.660862] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.661010] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [149.665160] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [149.665486] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [149.665637] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [149.665663] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [149.669933] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [149.669942] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [149.669947] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [149.674086] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [149.674091] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [149.674095] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [149.686767] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.692478] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [149.701472] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [149.701835] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [149.727751] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.730726] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [149.764160] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.796954] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.797935] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [149.798037] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [149.830955] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.864955] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.865002] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [149.865059] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [149.865572] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [149.897953] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.931951] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.933755] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [149.933827] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [149.966141] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [149.999951] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [150.000559] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [150.032949] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [150.066955] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [150.067001] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [150.067052] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [150.067125] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [150.067203] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88812245d0c0 (1)
<7> [150.068544] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [150.074397] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [150.075520] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [150.076538] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [150.076998] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [150.077396] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [150.077856] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [150.077881] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [150.077897] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [150.078510] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [150.078876] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [150.079857] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [150.080138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [150.080148] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [150.080414] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [150.081812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [150.081818] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [150.082043] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [150.082054] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [150.082062] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [150.086320] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [150.086329] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [150.086337] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [150.090627] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [150.090637] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [150.090645] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [150.094901] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [150.094910] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [150.094917] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [150.094922] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [150.094926] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [150.094930] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [150.094934] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [150.094938] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [150.094942] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [150.094996] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [150.095014] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [150.095065] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [150.095081] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [150.096241] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [150.096148] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [150.096414] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [150.096668] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [150.096777] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [150.096792] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [150.096879] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [150.097082] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [150.097272] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [150.097465] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [150.097639] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [150.097805] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [150.097966] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [150.098129] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [150.098303] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [150.098479] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [150.098634] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [150.098781] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [150.098922] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [150.099058] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [150.099193] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [150.099329] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [150.099465] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [150.099600] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [150.099726] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [150.099976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [150.100152] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [150.100308] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [150.100452] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [150.100610] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [150.101071] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [150.101082] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [150.101089] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [150.105332] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [150.105338] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [150.105342] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [150.107412] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [150.107435] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [150.108184] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<6> [150.109242] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [150.109818] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [150.109731] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [150.109835] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<6> [150.110036] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [150.110080] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [150.110492] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [150.110423] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [150.110722] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [150.111639] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [150.114848] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [150.116491] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [150.117086] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [150.117639] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [150.117768] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [150.117893] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [150.118019] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [150.118027] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [150.118032] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [150.118473] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [150.118616] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [150.119003] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [150.119115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [150.119119] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [150.119229] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [150.120410] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [150.120414] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [150.120532] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [150.120538] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [150.120543] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [150.124671] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [150.124676] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [150.124680] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [150.128814] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [150.128818] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [150.128822] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [150.132948] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [150.132952] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [150.132960] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [150.132963] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [150.132964] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [150.132966] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [150.132968] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [150.132970] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [150.132971] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [150.133090] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [150.133105] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [150.133129] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [150.133140] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [150.133142] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [150.133199] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [150.180538] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [150.181226] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [150.181910] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [150.182517] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [150.183105] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<6> [151.135056] [IGT] xe_module_load: finished subtest many-reload, SUCCESS
<6> [151.136494] [IGT] xe_module_load: exiting, ret=0
|