Result: 1 Warning(s)
boot-20250925-0204 dmesg-20250925-0204
| Detail | Value |
|---|---|
| Duration | 4.46 seconds |
| Igt-Version |
IGT-Version: 2.1-g162a06a82 (x86_64) (Linux: 6.17.0-rc7-lgci-xe-xe-3827-690ed0728a0e31e6b+ x86_64) |
| Out |
Using IGT_SRANDOM=1758765891 for randomisation Opened device: /dev/dri/card0 DRM driver: xe Opened device: /dev/dri/renderD128 Starting subtest: unplug-rescan Unloaded audio driver snd_hda_intel Realoading snd_hda_intel Subtest unplug-rescan: SUCCESS (4.457s) |
| Err |
Starting subtest: unplug-rescan Subtest unplug-rescan: SUCCESS (4.457s) |
| Dmesg |
<6> [80.632957] [IGT] core_hotunplug: executing
<7> [80.656030] [IGT] core_hotunplug: closing selected device instance
<7> [80.656148] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [80.663550] [IGT] core_hotunplug: closing selected render device instance
<7> [80.663606] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [80.663773] [IGT] core_hotunplug: starting subtest unplug-rescan
<7> [80.822369] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [80.822967] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [80.823552] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [80.824056] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [80.824619] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<4> [81.523734] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000
<7> [81.669503] [IGT] core_hotunplug: reopening DRM device for health check
<7> [81.676698] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [81.676768] [IGT] core_hotunplug: closing health checked device instance
<7> [81.676830] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [81.676854] [IGT] core_hotunplug: reopening render device for health check
<7> [81.684333] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [81.684500] [IGT] core_hotunplug: closing health checked device instance
<7> [81.684557] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<4> [82.526870] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...
<3> [82.526888] snd_hda_intel 0000:00:1f.3: no codecs initialized
<7> [82.559374] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [82.560032] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [82.560686] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [82.561416] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [82.562052] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [82.575722] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [82.576350] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [82.576931] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [82.577445] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [82.577979] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [82.603236] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [82.603824] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [82.604462] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [82.605187] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [82.605768] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [82.693144] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [82.693603] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [82.694101] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [82.694604] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [82.694952] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [82.695254] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [82.695557] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [82.695956] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [82.696249] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [82.696605] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [82.697027] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [82.697467] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [82.697951] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [82.698401] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [82.698874] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [82.699300] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [82.699685] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [82.700056] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [82.700325] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [82.700615] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [82.700945] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [82.701232] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [82.701515] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [82.701825] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [82.702105] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [82.702387] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [82.702667] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [82.702997] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [82.703278] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [82.703548] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [82.703830] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [82.704087] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [82.704328] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [82.704560] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [82.704822] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [82.705046] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [82.706254] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [82.706497] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [82.706734] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [82.706943] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [82.707156] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [82.815148] [IGT] core_hotunplug: unplugging the device
<7> [82.815494] xe 0000:03:00.0: [drm:xe_pci_sriov_configure [xe]] PF: disabling 0 VFs
<7> [82.816066] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [82.816580] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [82.817268] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [82.817935] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [82.818446] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [82.819018] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [82.819509] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [82.820082] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [82.820659] xe 0000:03:00.0: [drm:drm_client_release] fbdev
<6> [82.822508] Deleting MTD partitions on "xe.nvm.768":
<6> [82.822518] Deleting xe.nvm.768.DESCRIPTOR MTD partition
<6> [82.825412] Deleting xe.nvm.768.GSC MTD partition
<6> [82.828156] Deleting xe.nvm.768.OptionROM MTD partition
<6> [82.829396] Deleting xe.nvm.768.DAM MTD partition
<7> [82.832127] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:DP-1] removing connector from sysfs
<7> [82.832426] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:275:HDMI-A-1] removing connector from sysfs
<7> [82.833335] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:281:DP-2] removing connector from sysfs
<7> [82.833632] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:289:HDMI-A-2] removing connector from sysfs
<7> [82.833917] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-3] removing connector from sysfs
<7> [82.834950] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:297:DP-3] removing connector from sysfs
<7> [82.835251] xe 0000:03:00.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:305:HDMI-A-4] removing connector from sysfs
<7> [82.853220] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [82.856300] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [82.858601] xe 0000:03:00.0: [drm:xe_late_bind_wait_for_worker_completion [xe]] Flush work: load fan_control firmware
<7> [82.878213] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [82.883272] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [82.937181] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [82.943060] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [82.960540] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [82.997142] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [82.999007] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881215f36e0 (0)
<7> [83.002997] xe 0000:03:00.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff8881215f36e0 (0)
<7> [83.003427] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [83.146101] [IGT] core_hotunplug: rediscovering the device
<6> [83.168687] pci 0000:03:00.0: [8086:e20b] type 00 class 0x030000 PCIe Endpoint
<6> [83.168753] pci 0000:03:00.0: BAR 0 [mem 0x4a00000000-0x4a00ffffff 64bit pref]
<6> [83.168762] pci 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]
<6> [83.168769] pci 0000:03:00.0: ROM [mem 0x80800000-0x809fffff pref]
<6> [83.168930] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6> [83.169029] pci 0000:03:00.0: PME# supported from D0 D3hot
<6> [83.169099] pci 0000:03:00.0: VF BAR 0 [mem 0x4a01000000-0x4a01ffffff 64bit pref]
<6> [83.169103] pci 0000:03:00.0: VF BAR 0 [mem 0x4a01000000-0x4a0cffffff 64bit pref]: contains BAR 0 for 12 VFs
<6> [83.169109] pci 0000:03:00.0: VF BAR 2 [mem 0x4400000000-0x447fffffff 64bit pref]
<6> [83.169112] pci 0000:03:00.0: VF BAR 2 [mem 0x4400000000-0x49ffffffff 64bit pref]: contains BAR 2 for 12 VFs
<6> [83.170101] pci 0000:03:00.0: Adding to iommu group 18
<6> [83.171997] pci 0000:03:00.0: vgaarb: setting as boot VGA device
<6> [83.172000] pci 0000:03:00.0: vgaarb: bridge control possible
<6> [83.172002] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6> [83.185077] pci 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
<6> [83.185102] pci 0000:03:00.0: VF BAR 2 [mem 0x4400000000-0x49ffffffff 64bit pref]: assigned
<6> [83.185112] pci 0000:03:00.0: BAR 0 [mem 0x4a00000000-0x4a00ffffff 64bit pref]: assigned
<6> [83.185132] pci 0000:03:00.0: VF BAR 0 [mem 0x4a01000000-0x4a0cffffff 64bit pref]: assigned
<6> [83.185638] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [83.188788] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [83.189216] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [83.189237] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [83.189500] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [83.189701] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [83.189909] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [83.192272] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [83.192317] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [83.192322] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [83.192327] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [83.192330] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [83.239728] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [83.239952] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [83.240064] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [83.240156] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [83.240257] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [83.240335] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [83.240417] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [83.240507] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [83.240593] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [83.240678] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [83.240766] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [83.240858] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [83.240947] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [83.241035] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [83.241122] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [83.241729] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [83.255157] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [83.255260] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [83.255354] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [83.255445] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [83.255534] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [83.255622] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [83.255710] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [83.255799] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [83.255881] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [83.255984] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [83.256081] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [83.256173] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [83.256275] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [83.256401] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [83.256515] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [83.256606] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [83.256691] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [83.256777] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [83.256869] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [83.256959] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [83.257048] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [83.257134] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [83.257218] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [83.257317] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [83.257418] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [83.257504] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [83.257593] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [83.257681] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [83.257768] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [83.257858] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [83.257961] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [83.258068] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [83.258176] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [83.271300] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [83.271571] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [83.271757] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [83.271932] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [83.272135] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [83.272362] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [83.272576] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [83.272752] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [83.272922] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [83.273765] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [83.274823] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [83.274979] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [83.275095] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [83.275297] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [83.275397] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [83.275555] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [83.275675] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [83.275815] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [83.275959] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [83.276082] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)
<7> [83.276250] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [83.276370] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 150 (150.0 usec)
<7> [83.276542] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [83.276629] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [83.276838] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [83.276891] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [83.277139] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [83.277166] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [83.277473] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [83.277479] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [83.277760] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [83.277794] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [83.278048] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [83.278114] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [83.278378] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 100 (100.0 usec)
<7> [83.278449] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [83.278662] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 150 (150.0 usec)
<7> [83.278773] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [83.278968] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [83.279144] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [83.279301] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [83.279506] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [83.279579] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [83.279678] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [83.279705] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [83.279818] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [83.279960] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [83.280092] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [83.280210] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [83.280332] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [83.280458] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [83.280578] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [83.280698] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [83.280803] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [83.280930] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [83.281050] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [83.281170] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [83.281308] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [83.288648] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<6> [83.291370] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [83.292009] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [83.292114] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [83.292225] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [83.292339] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:261:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [83.292454] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:261:DDI TC1/PHY F]
<7> [83.292941] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:261:DDI TC1/PHY F]
<7> [83.293030] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:261:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [83.293278] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:280:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [83.293382] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:280:DDI TC2/PHY G]
<7> [83.293688] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:280:DDI TC2/PHY G]
<7> [83.293774] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:280:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [83.293967] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:292:DDI TC3/PHY H]
<7> [83.294049] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:292:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [83.294238] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:296:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [83.294346] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:296:DDI TC4/PHY I]
<7> [83.294654] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:296:DDI TC4/PHY I]
<7> [83.294740] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:296:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [83.295040] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [83.295162] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [83.295291] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [83.295410] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:259:pipe D] hw state readout: disabled
<7> [83.295493] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [83.295576] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [83.295656] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [83.295738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [83.295823] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [83.295905] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [83.295986] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [83.296065] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [83.296145] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [83.296236] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [83.296320] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [83.296402] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [83.296486] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [83.296568] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [83.296648] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [83.296728] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [83.296806] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [83.296886] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [83.296965] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D
<7> [83.297046] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D
<7> [83.297126] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D
<7> [83.297215] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D
<7> [83.297293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D
<7> [83.297372] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] hw state readout: disabled, pipe D
<7> [83.297454] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [83.297529] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST A] hw state readout: disabled, pipe A
<7> [83.297606] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST B] hw state readout: disabled, pipe B
<7> [83.297684] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:265:DP-MST C] hw state readout: disabled, pipe C
<7> [83.297763] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:266:DP-MST D] hw state readout: disabled, pipe D
<7> [83.297844] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [83.297922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7> [83.297999] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7> [83.298077] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7> [83.298154] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7> [83.298272] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:292:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [83.298354] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:296:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [83.298435] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:298:DP-MST A] hw state readout: disabled, pipe A
<7> [83.298516] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:299:DP-MST B] hw state readout: disabled, pipe B
<7> [83.298593] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:300:DP-MST C] hw state readout: disabled, pipe C
<7> [83.298672] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:301:DP-MST D] hw state readout: disabled, pipe D
<7> [83.298754] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:262:DP-1] hw state readout: disabled
<7> [83.298836] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:275:HDMI-A-1] hw state readout: disabled
<7> [83.298916] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:281:DP-2] hw state readout: disabled
<7> [83.298998] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:289:HDMI-A-2] hw state readout: disabled
<7> [83.299078] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:293:HDMI-A-3] hw state readout: disabled
<7> [83.299159] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:297:DP-3] hw state readout: disabled
<7> [83.299252] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:305:HDMI-A-4] hw state readout: disabled
<7> [83.299333] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [83.299411] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [83.299489] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [83.299565] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [83.299641] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [83.299718] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [83.299793] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [83.299869] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [83.299946] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [83.300022] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [83.300100] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [83.300177] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [83.300271] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [83.300354] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [83.300433] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [83.300511] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [83.300592] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [83.300673] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [83.300753] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:204:plane 1D] min_cdclk 0 kHz
<7> [83.300836] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 2D] min_cdclk 0 kHz
<7> [83.300918] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 3D] min_cdclk 0 kHz
<7> [83.301000] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:234:plane 4D] min_cdclk 0 kHz
<7> [83.301085] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 5D] min_cdclk 0 kHz
<7> [83.301173] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:cursor D] min_cdclk 0 kHz
<7> [83.301270] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [83.301352] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [83.301433] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [83.301512] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [83.301586] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [83.301679] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [83.301772] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [83.301862] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [83.301963] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [83.302094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [83.302186] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [83.302288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7> [83.302375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [setup_hw_state]
<6> [83.303627] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [83.305475] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0056b3f7
<7> [83.305542] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [83.305601] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [83.305659] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [83.305716] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000d00
<7> [83.305774] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [83.305831] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [83.305886] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [83.305943] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [83.305999] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [83.306054] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [83.306109] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [83.306165] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [83.306273] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [83.306329] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [83.306420] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [83.307886] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [83.312200] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [83.313562] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [83.314203] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 6ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [83.314721] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [83.314811] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [83.314885] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [83.314957] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [83.315028] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [83.315098] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [83.406210] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [83.406212] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [83.406358] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [83.406448] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [83.406526] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [83.406596] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [83.406702] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [83.406801] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [83.406916] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [83.406981] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [83.407049] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [83.407125] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [83.407267] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [83.407342] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [83.407409] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [83.407478] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [83.408625] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [83.408701] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [83.408781] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [83.408854] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [83.408927] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [83.408997] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [83.409069] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [83.409163] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [83.409234] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [83.409296] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [83.409358] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [83.409420] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [83.409483] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [83.409545] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [83.409605] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [83.409666] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [83.409726] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [83.409787] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [83.409845] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [83.409903] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [83.409962] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [83.410021] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [83.410079] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [83.410156] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [83.410223] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [83.410286] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [83.410354] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [83.410421] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [83.410485] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [83.410551] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [83.410617] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [83.410680] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [83.410744] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [83.410812] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [83.410877] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [83.410939] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [83.411004] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [83.411068] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [83.411156] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [83.411236] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [83.411308] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [83.411377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [83.411513] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [83.411577] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [83.411640] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [83.411701] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [83.411838] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [83.411902] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [83.411965] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [83.412025] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [83.412164] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [83.412239] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [83.412306] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [83.412368] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [83.412431] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [83.412493] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [83.412555] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [83.412698] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [83.412761] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [83.412824] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [83.412887] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [83.412950] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [83.413014] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [83.413077] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [83.413453] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [83.415746] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x00f973f7
<7> [83.415801] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [83.415853] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [83.415906] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [83.415957] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002158
<7> [83.416007] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [83.416058] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [83.416118] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [83.416174] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [83.416228] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [83.416283] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [83.416332] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [83.416383] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [83.416433] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [83.416507] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [83.416580] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [83.416966] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x527000 for xe_guc_init_post_hwconfig [xe]
<7> [83.417800] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [83.418794] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [83.441746] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [83.442771] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x00000072 [0x39/00]
<7> [83.447089] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000534 [0x1A/05]
<7> [83.448439] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: load still in progress, timeouts = 0, freq = 2150MHz (req 2133MHz), status = 0x80000634 [0x1A/06]
<7> [83.448655] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: init took 5ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034, timeouts = 0
<7> [83.448911] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [83.449430] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [83.449504] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [83.449563] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [83.449618] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [83.449675] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [83.449731] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [83.449787] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [83.449847] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [83.449909] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [83.451529] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [83.451599] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [83.451659] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [83.453183] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [83.453275] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [83.455889] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [83.456846] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.49.4
<7> [83.458932] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0069b3f7
<7> [83.458994] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [83.459053] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [83.459128] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [83.459184] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003260
<7> [83.459239] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [83.459294] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [83.459349] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [83.459404] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [83.459458] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [83.459513] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [83.459567] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [83.459621] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [83.459676] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [83.460289] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [83.460749] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [83.460842] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [83.462324] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [83.472072] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [83.472392] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [83.472483] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [83.472557] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [83.472630] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [83.472703] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [83.472774] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [83.472848] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [83.472850] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [83.472851] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [83.472853] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [83.472854] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [83.472855] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [83.472857] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [83.472858] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [83.472862] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [83.473002] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [83.473156] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [83.473292] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [83.473429] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [83.474632] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [83.474718] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [83.474802] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xa210] = 0x00000002
<7> [83.474887] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [83.474963] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [83.475041] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [83.475132] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [83.475216] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [83.475288] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [83.475358] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [83.475429] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [83.475496] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [83.475562] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [83.475628] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [83.475694] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [83.475759] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [83.475824] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [83.475889] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [83.475953] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [83.476018] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [83.476093] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [83.476159] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [83.476225] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [83.476291] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [83.476358] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [83.476424] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [83.476498] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [83.476572] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [83.476783] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [83.476857] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [83.476930] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [83.477128] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [83.477201] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [83.477273] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [83.477488] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [83.477565] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [83.477641] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [83.478088] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [83.480853] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x008d23f7
<7> [83.480914] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [83.480971] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [83.481029] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [83.481100] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004368
<7> [83.481157] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [83.481213] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [83.481268] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [83.481323] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [83.481378] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [83.481434] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [83.481489] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [83.481544] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [83.481599] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [83.481677] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [83.481758] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [83.482377] xe 0000:03:00.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x657000 for xe_guc_init_post_hwconfig [xe]
<7> [83.504241] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [83.505300] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [83.515036] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [83.515339] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [83.515796] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [83.515864] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [83.517132] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [83.517198] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<5> [83.523214] Creating 4 MTD partitions on "xe.nvm.768":
<5> [83.523228] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<5> [83.529413] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<5> [83.537699] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<5> [83.543235] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [83.551933] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [83.552035] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [83.552250] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [83.552305] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [83.552385] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [83.552454] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [83.552522] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [83.552761] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [83.552860] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [83.552950] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [83.553049] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [83.553132] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [83.553222] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [83.553309] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [83.553392] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [83.553473] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [83.553553] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [83.553639] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [83.553725] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [83.553808] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [83.553889] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [83.553978] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [83.554106] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 0: start 0x59008
<7> [83.554213] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 1: start 0x59108
<7> [83.554320] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 2: start 0x59208
<7> [83.554423] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 3: start 0x59308
<7> [83.554583] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:259:pipe D] FQ 4: start 0x593c8
<7> [83.554906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [83.555013] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [83.555105] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [83.555229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [83.555322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [83.555420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [83.555638] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:259:pipe D] enable: no [fastset]
<6> [83.555687] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [83.556332] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [83.556524] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [83.556761] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [83.557101] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:259:pipe D]
<7> [83.559469] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:DP-1] adding connector to sysfs
<7> [83.560113] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [83.561386] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:DP-1] generating connector hotplug event
<7> [83.561461] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:HDMI-A-1] adding connector to sysfs
<7> [83.562016] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:HDMI-A-1] generating connector hotplug event
<7> [83.562057] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-2] adding connector to sysfs
<7> [83.562815] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [83.566468] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-2] generating connector hotplug event
<7> [83.566626] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:HDMI-A-2] adding connector to sysfs
<7> [83.570049] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:HDMI-A-2] generating connector hotplug event
<7> [83.570154] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-3] adding connector to sysfs
<7> [83.570887] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-3] generating connector hotplug event
<7> [83.570960] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:297:DP-3] adding connector to sysfs
<7> [83.571881] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [83.572657] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:297:DP-3] generating connector hotplug event
<7> [83.572705] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:305:HDMI-A-4] adding connector to sysfs
<7> [83.573321] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:305:HDMI-A-4] generating connector hotplug event
<6> [83.573371] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [83.573781] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [83.573886] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [83.574814] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [83.574899] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [83.574978] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [83.575065] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:259:pipe D] not active, skipping
<7> [83.575144] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [83.575410] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [83.575626] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [83.579579] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:262:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.579679] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [83.583783] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:275:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.583873] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [83.584003] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [83.587688] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [83.587718] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [83.588845] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [83.591281] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [83.591303] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [83.592428] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [83.594882] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [83.603486] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [83.604358] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [83.607984] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [83.608008] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [83.608129] xe 0000:03:00.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff8881215f2fe0 (2)
<7> [83.610317] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881215f2fe0 (1)
<7> [83.610333] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [83.610484] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [83.610621] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [83.610751] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:281:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.610849] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [83.611197] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [83.611287] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [83.611734] xe 0000:03:00.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881215f2fe0 (2)
<7> [83.611747] xe 0000:03:00.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [83.611793] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [83.611924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [83.611929] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [83.612059] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [83.613282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [83.613286] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [83.613417] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:289:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.613534] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [83.617682] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:293:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.617789] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [83.621922] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:297:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.622061] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [83.626191] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:305:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [83.626328] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [83.626336] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [83.626345] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [83.630533] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [83.630545] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [83.630553] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [83.634710] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [83.634719] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [83.634726] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [83.648250] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.655925] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [83.687199] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.692861] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [83.724237] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.756332] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.757291] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [83.757377] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [83.790898] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.824288] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.824341] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [83.824423] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [83.824920] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [83.859928] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.893988] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.895705] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [83.895847] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [83.929194] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.963172] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [83.964121] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [83.997720] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [84.030114] xe 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Too many retries, giving up. First error: -5
<7> [84.030159] xe 0000:03:00.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [84.030240] xe 0000:03:00.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [84.030363] xe 0000:03:00.0: [drm] *ERROR* Sending link address failed with -5
<7> [84.030464] xe 0000:03:00.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881215f2fe0 (1)
<7> [84.031711] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [84.037053] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [84.038060] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [84.039047] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [84.039496] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [84.039851] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [84.040151] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [84.040173] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [84.040187] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [84.040693] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [84.041056] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [84.041533] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [84.041802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [84.041811] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [84.042041] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [84.043377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [84.043382] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [84.043564] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [84.043573] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [84.043581] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [84.047815] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [84.047826] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [84.047834] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<7> [84.052055] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [84.052067] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [84.052074] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [84.056273] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [84.056283] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [84.056288] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [84.056293] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [84.056297] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [84.056300] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [84.056304] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [84.056308] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [84.056311] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [84.056365] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [84.056383] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [84.056426] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [84.056439] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [84.057713] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [84.057625] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [84.057877] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [84.058146] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [84.058344] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1]
<7> [84.058362] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:262:DP-1]
<7> [84.058403] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [84.058651] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [84.058844] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [84.059039] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [84.059224] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [84.059393] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [84.059555] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [84.059732] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [84.059909] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [84.060050] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [84.060180] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [84.060313] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [84.060444] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [84.060575] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [84.060744] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [84.060880] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [84.061004] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [84.061335] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [84.061612] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [84.061753] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [84.061979] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [84.062176] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [84.062369] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [84.062561] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [84.062768] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:DP-1] disconnected
<7> [84.062776] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [84.062781] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:275:HDMI-A-1]
<7> [84.066913] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [84.066921] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2]
<7> [84.066926] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:281:DP-2]
<7> [84.068863] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [84.068922] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [84.069441] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:281:DP-2][ENCODER:280:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [84.071441] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [84.071483] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [84.072332] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [84.073722] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:280:DDI TC2/PHY G] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [84.078919] xe 0000:03:00.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [84.079635] xe 0000:03:00.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [84.080197] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [84.080492] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000, 1350000
<7> [84.080768] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [84.080861] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:DP-2] disconnected
<7> [84.080867] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2]
<7> [84.080871] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:289:HDMI-A-2]
<7> [84.081199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [84.081289] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [84.081518] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [84.081617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [84.081621] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<6> [84.081680] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [84.081714] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [84.082103] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [84.082263] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [84.082313] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [84.082545] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [84.082679] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [84.082884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [84.082886] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [84.082976] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:HDMI-A-2] disconnected
<7> [84.082980] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3]
<7> [84.082984] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:293:HDMI-A-3]
<7> [84.086265] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [84.087086] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-3] disconnected
<7> [84.087095] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3]
<7> [84.087101] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:297:DP-3]
<6> [84.090740] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4
<7> [84.091282] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:297:DP-3] disconnected
<7> [84.091291] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4]
<7> [84.091297] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:305:HDMI-A-4]
<7> [84.095450] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:305:HDMI-A-4] disconnected
<7> [84.095456] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [84.095464] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:DP-1] enabled? no
<7> [84.095466] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:HDMI-A-1] enabled? no
<7> [84.095468] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-2] enabled? no
<7> [84.095470] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:HDMI-A-2] enabled? no
<7> [84.095471] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-3] enabled? no
<7> [84.095473] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:297:DP-3] enabled? no
<7> [84.095475] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:305:HDMI-A-4] enabled? no
<7> [84.095594] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [84.095607] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [84.095635] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [84.095645] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [84.095646] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [84.095644] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [84.095979] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [84.096198] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [84.100598] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [84.130306] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [84.130607] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [84.130855] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [84.131094] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [84.131312] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [84.131532] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [84.131791] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [84.131998] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [84.132197] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [84.132397] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [84.132596] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [84.132781] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [84.132965] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [84.133142] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [84.133315] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [84.133489] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [84.133701] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [84.133874] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [84.134045] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [84.134205] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [84.134365] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [84.134525] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [84.134701] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [84.134850] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [84.134992] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [84.135135] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [84.135281] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [84.135426] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [84.135573] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [84.135710] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [84.135840] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [84.135968] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [84.136095] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [84.136221] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [84.136348] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [84.136470] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6> [84.141658] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card1/input36
<6> [84.142542] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card1/input37
<7> [84.143578] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<6> [84.144379] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card1/input38
<6> [84.146303] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card1/input39
<4> [85.096851] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
<7> [85.107539] [IGT] core_hotunplug: reopening DRM device for health check
<7> [85.113874] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [85.113944] [IGT] core_hotunplug: closing health checked device instance
<7> [85.114003] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [85.114027] [IGT] core_hotunplug: reopening render device for health check
<7> [85.120422] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [85.120565] [IGT] core_hotunplug: closing health checked device instance
<7> [85.120612] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [85.120653] [IGT] core_hotunplug: finished subtest unplug-rescan, SUCCESS
<6> [85.121213] [IGT] core_hotunplug: exiting, ret=0
|