Result: 2 Warning(s)
boot-20250830-0803 dmesg-20250830-0803
| Detail | Value |
|---|---|
| Duration | 2.75 seconds |
| Igt-Version |
IGT-Version: 2.1-g8a840cd64 (x86_64) (Linux: 6.17.0-rc3-lgci-xe-xe-3643-99f4b32d88cb9718c+ x86_64) |
| Out |
Using IGT_SRANDOM=1756542096 for randomisation Opened device: /dev/dri/card0 Starting subtest: wedged-at-any-timeout Opened device: /dev/dri/card2 Subtest wedged-at-any-timeout: SUCCESS (2.754s) |
| Err |
Starting subtest: wedged-at-any-timeout Subtest wedged-at-any-timeout: SUCCESS (2.754s) |
| Dmesg |
<6> [1192.778498] Console: switching to colour dummy device 80x25
<6> [1192.778933] [IGT] xe_wedged: executing
<6> [1192.795363] [IGT] xe_wedged: starting subtest wedged-at-any-timeout
<6> [1192.796294] [IGT] add ignored dmesg regex: CRITICAL: Xe has declared device [0-9A-Fa-f:.]* as wedged|GT[0-9A-Fa-f]*: reset failed .-ECANCELED|GT[0-9A-Fa-f]*: Failed to submit|Modules linked in:|__pfx___drm_
<7> [1192.799596] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7> [1192.799730] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1192.800263] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [1192.800379] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [1192.800478] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [1192.802010] xe 0000:00:02.0: [drm:pf_queue_work_func [xe]] GT0:
ASID: 1048575
VFID: 0
PDATA: 0x0490
Faulted Address: 0x00000000001a0000
FaultType: 0
AccessType: 0
FaultLevel: 4
EngineClass: 0 rcs
EngineInstance: 0
<7> [1192.802121] xe 0000:00:02.0: [drm:pf_queue_work_func [xe]] GT0: Fault response: Unsuccessful -EINVAL
<7> [1192.802340] xe 0000:00:02.0: [drm:xe_guc_exec_queue_memory_cat_error_handler [xe]] GT0: Engine memory CAT error [18]: class=rcs, logical_mask: 0x1, guc_id=3
<7> [1192.803457] xe 0000:00:02.0: [drm:xe_hw_engine_snapshot_capture [xe]] GT0: Proceeding with manual engine snapshot
<3> [1192.803625] xe 0000:00:02.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:00:02.0 as wedged.
IOCTLs and executions are blocked. Only a rebind may clear the failure
Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/xe/kernel/issues/new
<7> [1192.803736] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
<7> [1192.803949] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel stopped
<6> [1192.804029] xe 0000:00:02.0: [drm] device wedged, needs recovery
<5> [1192.804312] xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=4294967169, lrc_seqno=4294967169, guc_id=3, flags=0x0 in xe_wedged [12679]
<6> [1192.805177] xe 0000:00:02.0: [drm] Xe device coredump has been created
<6> [1192.805199] xe 0000:00:02.0: [drm] Check your /sys/class/drm/card0/device/devcoredump/data
<7> [1192.805841] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [1192.806684] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [1192.806837] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [1192.806990] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [1192.807141] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [1192.807279] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [1192.807399] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7> [1192.815707] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:206] is removed
<7> [1192.815786] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 3942) -> ( 0 - 0), size 3942 -> 0
<7> [1192.815902] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [1192.815974] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [1192.816044] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [1192.816114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [1192.816207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0
<7> [1192.816302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [1192.816389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [1192.816475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1192.816577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1192.816667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [1192.817031] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay
<7> [1192.819626] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [1192.823450] xe 0000:00:02.0: [drm:drm_client_release] fbdev
<7> [1192.824726] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [1192.824913] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [1192.825085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [1192.825253] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [1192.825420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8214124/8388608 link 912680/524288, found tu 0, data 0/0 link 0/0)
<7> [1192.825621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [1192.825804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [1192.825972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2560, found 0)
<7> [1192.826132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2720, found 0)
<7> [1192.826289] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2560, found 0)
<7> [1192.826446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2720, found 0)
<7> [1192.826609] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2608, found 0)
<7> [1192.826758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2640, found 0)
<7> [1192.826905] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)
<7> [1192.827051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)
<7> [1192.827195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1663, found 0)
<7> [1192.827361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1669, found 0)
<7> [1192.827536] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1800, found 0)
<7> [1192.827731] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1800, found 0)
<7> [1192.827879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2560, found 0)
<7> [1192.828024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2720, found 0)
<7> [1192.828171] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2560, found 0)
<7> [1192.828317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2720, found 0)
<7> [1192.828488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2608, found 0)
<7> [1192.828687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2640, found 0)
<7> [1192.828838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)
<7> [1192.829011] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)
<7> [1192.829158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1663, found 0)
<7> [1192.829301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1669, found 0)
<7> [1192.829442] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1800, found 0)
<7> [1192.829587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1800, found 0)
<7> [1192.829724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [1192.829860] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [1192.829989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [1192.830118] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [1192.830247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 18, found 0)
<7> [1192.830373] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 1175040, found 0)
<7> [1192.830503] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 1175040, found 0)
<7> [1192.830650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 675000, found 0)
<7> [1192.830783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [1192.830915] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset
<7> [1192.831094] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [1192.831214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [1192.831378] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (3942 - 4096) -> ( 0 - 0), size 154 -> 0
<7> [1192.831499] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing
<7> [1192.831656] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [1192.831784] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 0, actual 0
<7> [1192.831943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [modeset]
<7> [1192.832063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [1192.832180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [1192.832293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [1192.832406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [1192.832515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [1192.832643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [1192.832945] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [1192.833075] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [1193.039723] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0
<7> [1193.040111] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [1193.045937] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off
<7> [1193.046218] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [1193.046486] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [1193.046401] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [1193.046796] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short
<7> [1193.099822] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [1193.100170] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7> [1193.100454] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [1193.104516] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [1193.104800] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7> [1193.105058] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [1193.107258] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1193.107700] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [1193.107627] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A]
<7> [1193.108087] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]
<7> [1193.108154] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]
<7> [1193.108386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]
<7> [1193.108630] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]
<7> [1193.108864] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]
<7> [1193.109090] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]
<7> [1193.109310] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]
<7> [1193.109525] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]
<7> [1193.109811] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]
<7> [1193.110026] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]
<7> [1193.110215] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]
<7> [1193.110402] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]
<7> [1193.110603] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]
<7> [1193.110789] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]
<7> [1193.111004] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]
<7> [1193.111233] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [1193.111419] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [1193.111628] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [1193.112045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [1193.112381] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [1193.112665] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [1193.112916] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [1193.113174] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)
<7> [1193.131964] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [1193.132359] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7> [1193.132696] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 30
<7> [1193.133037] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]
<7> [1193.141766] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:205:eDP-1] removing connector from sysfs
<7> [1193.146284] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:214:DP-1] removing connector from sysfs
<7> [1193.157302] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:226:DP-2] removing connector from sysfs
<7> [1193.167305] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:234:DP-3] removing connector from sysfs
<7> [1193.199013] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<6> [1193.202388] xe 0000:00:02.0: [drm] Xe device coredump has been deleted.
<7> [1193.208418] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled
<7> [1193.215686] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1193.316732] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
<7> [1193.382113] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (226 ms remaining)
<7> [1193.615700] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [1193.635612] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1193.636041] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1193.638356] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814a5dfb40 (0)
<7> [1193.638938] xe 0000:00:02.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff88814a5dfb40 (0)
<7> [1193.639712] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1193.640496] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (dp-alt -> disconnected) pin assignment: E max lanes: 4
<7> [1193.648610] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [1193.654552] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [1193.661012] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR
<6> [1193.665669] xe 0000:00:02.0: vgaarb: deactivate vga console
<6> [1193.687332] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7> [1193.687350] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7> [1193.687499] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7> [1193.687604] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<7> [1193.691855] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7> [1193.692027] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display
<7> [1193.692123] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [1193.692231] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7> [1193.692337] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7> [1193.692426] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7> [1193.692512] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7> [1193.692620] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7> [1193.692696] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7> [1193.692982] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7> [1193.693083] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5
<7> [1193.693221] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7> [1193.693335] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7> [1193.693438] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7> [1193.693546] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7> [1193.693676] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7> [1193.693802] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7> [1193.693928] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7> [1193.694043] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7> [1193.694155] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7> [1193.694261] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1193.694364] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1193.694466] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7> [1193.694569] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1193.694704] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1193.694814] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1193.694926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7> [1193.695036] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1193.695165] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1193.695269] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1193.695373] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7> [1193.695477] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1193.695606] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1193.695718] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1193.695831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7> [1193.695936] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1193.696040] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1193.696144] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1193.696246] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7> [1193.696346] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1193.696462] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1193.696616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1193.696733] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [1193.697309] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [1193.697423] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262
<7> [1193.697530] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [1193.697658] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [1193.697776] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [1193.697892] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [1193.698013] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)
<7> [1193.698128] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [1193.698229] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [1193.698337] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [1193.698459] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)
<7> [1193.698566] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [1193.698716] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [1193.698835] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [1193.698958] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [1193.699064] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [1193.699165] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [1193.699264] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7> [1193.699370] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [1193.699470] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [1193.699567] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [1193.699805] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [1193.699924] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [1193.700030] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7> [1193.700128] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7> [1193.700218] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7> [1193.700311] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7> [1193.700423] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [1193.700536] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [1193.700829] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [1193.700966] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os
<7> [1193.701111] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [1193.701236] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [1193.701391] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7> [1193.701506] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [1193.701615] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [1193.701722] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [1193.701857] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [1193.702006] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [1193.702148] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [1193.702271] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [1193.702386] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [1193.702489] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7> [1193.703017] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7> [1193.704086] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [1193.704153] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [1193.704213] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [1193.704301] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7> [1193.704325] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [1193.704406] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7> [1193.704434] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7> [1193.704494] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec)
<7> [1193.704527] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7> [1193.704574] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec)
<7> [1193.704639] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7> [1193.704689] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec)
<7> [1193.704765] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [1193.704783] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec)
<7> [1193.704874] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec)
<7> [1193.704875] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7> [1193.704983] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7> [1193.705090] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7> [1193.705191] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7> [1193.705285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7> [1193.705380] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7> [1193.705480] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7> [1193.705595] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [1193.705696] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7> [1193.705798] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7> [1193.705902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7> [1193.706016] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7> [1193.706133] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7> [1193.706243] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7> [1193.706332] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7> [1193.706424] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [1193.706516] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7> [1193.706625] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7> [1193.706736] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7> [1193.706845] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7> [1193.706951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7> [1193.707051] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7> [1193.707153] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<6> [1193.718621] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7> [1193.718916] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7> [1193.722531] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [1193.722712] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [1193.722855] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [1193.723037] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT)
<7> [1193.723200] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A]
<7> [1193.723353] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7> [1193.723496] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7> [1193.723655] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7> [1193.723805] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [1193.723946] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7> [1193.724084] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7> [1193.724217] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7> [1193.724336] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7> [1193.724454] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7> [1193.724574] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0
<7> [1193.724705] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0
<7> [1193.724807] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7> [1193.724907] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7> [1193.725004] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7> [1193.725097] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7> [1193.725222] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [1193.725350] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [1193.726593] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on
<7> [1193.726681] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [1193.726795] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [1193.736686] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1193.736824] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [1193.736928] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 panel power wasn't enabled
<7> [1193.944807] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84
<7> [1193.945272] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID \a\001\010\a\010 HW-rev 7.8 SW-rev 3.203 quirks 0x0000
<7> [1193.945795] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 06 83 81 0d 00
<7> [1193.946815] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 4
<7> [1193.947286] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7> [1193.948672] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] Panel replay selective_update is supported by panel
<7> [1193.950516] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1193.962011] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1193.962071] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1193.962090] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1193.962107] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1193.962122] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1193.962436] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1193.963041] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using alternate EDID fixed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1193.963639] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms)
<7> [1193.964353] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0
<7> [1193.964850] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] AUX Backlight Control Supported!
<7> [1193.965297] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Using VESA eDP backlight controls
<7> [1193.965769] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: seamless
<7> [1193.966395] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=0
<7> [1193.966465] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight enable is controlled through PWM
<7> [1193.966856] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight level is controlled through PWM
<7> [1193.967303] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz
<7> [1193.967880] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7> [1193.968166] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using AUX VESA interface for backlight control
<7> [1193.968385] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, disabled, brightness 0/192000
<7> [1193.968889] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7> [1193.969087] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7> [1193.969265] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7> [1193.969429] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7> [1193.969607] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7> [1193.969808] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [1193.970641] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7> [1193.971019] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: dp-alt)
<7> [1193.971287] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> dp-alt) pin assignment: E max lanes: 4
<7> [1193.971511] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1]
<7> [1193.972805] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7> [1193.973088] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7> [1193.973330] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2]
<7> [1193.974243] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7> [1193.974547] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7> [1193.974836] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3]
<7> [1193.976067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [1193.976311] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [1193.976518] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [1193.976710] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [1193.976877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [1193.977027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [1193.977175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [1193.977316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [1193.977455] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [1193.977609] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [1193.977750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [1193.977886] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [1193.978016] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [1193.978144] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [1193.978269] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [1193.978394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [1193.978517] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [1193.978650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [1193.978773] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [1193.978891] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [1193.979003] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [1193.979119] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: disabled, pipe A
<7> [1193.979243] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: E max lanes: 4
<7> [1193.979352] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7> [1193.979457] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A
<7> [1193.979560] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B
<7> [1193.979671] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C
<7> [1193.979780] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4
<7> [1193.979880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7> [1193.979977] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A
<7> [1193.980069] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B
<7> [1193.980160] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C
<7> [1193.980255] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4
<7> [1193.980342] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7> [1193.980434] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A
<7> [1193.980522] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B
<7> [1193.980620] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C
<7> [1193.980723] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: disabled
<7> [1193.980825] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled
<7> [1193.980930] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled
<7> [1193.981035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled
<7> [1193.981118] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [1193.981198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [1193.981275] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [1193.981352] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [1193.981429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [1193.981503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [1193.981579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [1193.981670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [1193.981756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [1193.981843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [1193.981930] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [1193.982015] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [1193.982110] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [1193.982199] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [1193.982280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [1193.982357] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [1193.982423] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [1193.982487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [1193.982563] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [1193.982648] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [1193.982724] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [1193.982811] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [1193.982958] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [1193.983104] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [1193.983239] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no
<7> [1193.983425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [1193.983569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [1193.983707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<6> [1193.986254] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4
<7> [1193.989036] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7
<7> [1193.989152] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7> [1193.989219] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7> [1193.989282] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [1193.989343] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc
<7> [1193.989404] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7> [1193.989465] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [1193.989525] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [1193.989611] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [1193.989709] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [1193.989812] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [1193.989914] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [1193.990016] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [1193.990103] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [1193.990176] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [1193.990293] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [1193.992137] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1500MHz (req 2000MHz), status = 0x00000072 [0x39/00]
<7> [1194.001635] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [1194.002393] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled
<7> [1194.002504] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,000000ff
<7> [1194.002611] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,000000ff
<7> [1194.002698] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff
<7> [1194.002780] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16
<7> [1194.002862] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff
<6> [1194.350757] xe 0000:00:02.0: [drm] GT0: ccs1 fused off
<6> [1194.350764] xe 0000:00:02.0: [drm] GT0: ccs2 fused off
<6> [1194.350766] xe 0000:00:02.0: [drm] GT0: ccs3 fused off
<7> [1194.350929] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7> [1194.351069] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [1194.351152] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [1194.351225] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [1194.351389] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7> [1194.351505] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7> [1194.351641] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7> [1194.351718] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [1194.351802] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [1194.351903] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [1194.353297] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7> [1194.353377] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7> [1194.353452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7> [1194.353521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7> [1194.353589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7> [1194.353679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7> [1194.353756] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7> [1194.353848] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7> [1194.353934] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7> [1194.354023] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [1194.354111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [1194.354181] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [1194.354246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [1194.354305] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [1194.354362] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [1194.354418] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [1194.354473] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [1194.354528] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [1194.354584] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [1194.354661] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [1194.354742] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [1194.354829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [1194.354917] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [1194.355003] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [1194.355083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [1194.355162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7> [1194.355235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000
<7> [1194.355296] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7> [1194.355355] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7> [1194.355415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7> [1194.355473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7> [1194.355530] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7> [1194.355590] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7> [1194.355670] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7> [1194.355736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7> [1194.355817] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08400840
<7> [1194.355903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7> [1194.355992] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe530] = 0x00000400
<7> [1194.356081] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7> [1194.356180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7> [1194.356364] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7> [1194.356432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000
<7> [1194.356499] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7> [1194.356563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7> [1194.356713] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7> [1194.356796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000
<7> [1194.356893] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [1194.356987] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7> [1194.357158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7> [1194.357228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000
<7> [1194.357282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7> [1194.357337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7> [1194.357392] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7> [1194.357445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7> [1194.357497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7> [1194.357792] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
<7> [1194.357933] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7
<7> [1194.358030] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7> [1194.358097] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7> [1194.358152] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [1194.358202] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc
<7> [1194.358248] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7> [1194.358294] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [1194.358338] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [1194.358382] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [1194.358426] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [1194.358469] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [1194.358512] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [1194.358555] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [1194.358611] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [1194.358696] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7> [1194.358811] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7> [1194.359302] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd16000 for xe_guc_init_post_hwconfig [xe]
<7> [1194.360915] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 48 ext-regs.
<7> [1194.380891] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056)
<7> [1194.382030] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1700MHz (req 2000MHz), status = 0x00000072 [0x39/00]
<7> [1194.391667] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 1700MHz, status = 0x8002F034, timeouts = 0
<7> [1194.392033] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled
<7> [1194.392804] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords
<7> [1194.392924] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7> [1194.393022] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7> [1194.393102] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7> [1194.393173] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7> [1194.393241] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7> [1194.393304] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7> [1194.393369] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7> [1194.393435] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7> [1194.395473] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords
<7> [1194.395559] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [1194.395654] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7> [1194.397344] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords
<7> [1194.397427] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6> [1194.400818] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4
<7> [1194.404808] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7
<7> [1194.404946] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [1194.405141] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7> [1194.405272] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [1194.405486] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a
<7> [1194.405642] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7> [1194.405788] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [1194.406004] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [1194.406135] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [1194.406262] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [1194.406402] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [1194.406516] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [1194.406670] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [1194.406787] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6> [1194.407924] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6> [1194.410470] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429
<6> [1194.411938] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7> [1194.412079] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [1194.412263] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [1194.414932] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7> [1194.434651] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7> [1194.435137] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled
<7> [1194.435306] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000
<7> [1194.435451] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000
<7> [1194.435592] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000
<7> [1194.435785] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16
<7> [1194.435926] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f
<6> [1194.436070] xe 0000:00:02.0: [drm] GT1: vcs1 fused off
<6> [1194.436076] xe 0000:00:02.0: [drm] GT1: vcs2 fused off
<6> [1194.436080] xe 0000:00:02.0: [drm] GT1: vcs3 fused off
<6> [1194.436084] xe 0000:00:02.0: [drm] GT1: vcs4 fused off
<6> [1194.436089] xe 0000:00:02.0: [drm] GT1: vcs5 fused off
<6> [1194.436094] xe 0000:00:02.0: [drm] GT1: vcs6 fused off
<6> [1194.436099] xe 0000:00:02.0: [drm] GT1: vcs7 fused off
<6> [1194.436103] xe 0000:00:02.0: [drm] GT1: vecs1 fused off
<6> [1194.436108] xe 0000:00:02.0: [drm] GT1: vecs2 fused off
<6> [1194.436112] xe 0000:00:02.0: [drm] GT1: vecs3 fused off
<7> [1194.436263] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7> [1194.436565] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7> [1194.436912] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7> [1194.439609] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7> [1194.439833] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7> [1194.440057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7> [1194.440271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7> [1194.440477] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7> [1194.440731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7> [1194.440947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7> [1194.441199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7> [1194.441409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7> [1194.441641] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7> [1194.441878] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7> [1194.442094] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7> [1194.442357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [1194.442562] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [1194.442806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [1194.443047] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [1194.443247] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [1194.443423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [1194.443661] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [1194.443845] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [1194.444008] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [1194.444166] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [1194.444320] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [1194.444476] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [1194.444640] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [1194.444788] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [1194.444932] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [1194.445076] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [1194.445213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7> [1194.445380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000
<7> [1194.445551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7> [1194.446402] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7> [1194.446561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000
<7> [1194.446749] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7> [1194.447433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7> [1194.447576] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000
<7> [1194.447753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7> [1194.448720] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled
<7> [1194.448885] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7
<7> [1194.448997] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [1194.449102] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7> [1194.449214] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [1194.449316] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a
<7> [1194.449416] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7> [1194.449513] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [1194.449628] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [1194.449725] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [1194.449822] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [1194.449915] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [1194.450006] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [1194.450096] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [1194.450181] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7> [1194.450313] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7> [1194.450443] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7> [1194.452690] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x197e000 for xe_guc_init_post_hwconfig [xe]
<7> [1194.473382] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056)
<7> [1194.474322] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7> [1194.474461] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7> [1194.493924] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7> [1194.494347] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled
<7> [1194.495549] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords
<7> [1194.495713] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7> [1194.499293] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords
<7> [1194.499545] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7> [1194.505098] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords
<7> [1194.505323] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7> [1194.548798] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7> [1194.550028] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0
<7> [1194.550395] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines:
<7> [1194.550773] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [1194.554110] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [1194.554570] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [1194.555015] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [1194.555448] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [1194.555829] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [1194.556160] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [1194.556564] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [1194.556996] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [1194.557347] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [1194.557721] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [1194.558030] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [1194.558337] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [1194.558732] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [1194.559068] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [1194.559404] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [1194.560247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [1194.560679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [1194.561065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1194.561484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1194.561908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [1194.562332] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [1194.562678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [1194.562991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [1194.563383] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)
<7> [1194.563719] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [1194.564029] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [1194.564350] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [1194.571504] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs
<7> [1194.573124] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered
<7> [1194.573296] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card2-eDP-1', has fwnode: yes
<7> [1194.573808] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card2-eDP-1
<7> [1194.574566] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event
<7> [1194.574620] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs
<7> [1194.575079] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card2-DP-1
<7> [1194.575908] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event
<7> [1194.575949] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs
<7> [1194.576372] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card2-DP-2
<7> [1194.577038] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event
<7> [1194.577081] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs
<7> [1194.577670] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card2-DP-3
<7> [1194.578574] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event
<6> [1194.578650] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 2
<7> [1194.578657] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6> [1194.591622] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [1194.596564] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input34
<7> [1194.597139] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [1194.597261] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [1194.598165] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7> [1194.603014] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1194.603254] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4
<7> [1194.603390] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1194.603800] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [1194.603882] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [1194.603960] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [1194.604034] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [1194.604219] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [1194.609278] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1194.609302] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1194.611286] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1194.614149] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1194.616275] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1194.620273] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1194.620287] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1194.622281] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1194.626339] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1194.639468] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1194.641539] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1194.648265] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1194.648285] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1194.648386] xe 0000:00:02.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff88814a5df6e0 (2)
<7> [1194.651933] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814a5df6e0 (1)
<7> [1194.651946] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1194.652045] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1194.652141] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1194.652237] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [1194.652323] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1194.652423] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1194.652732] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [1194.652839] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [1194.652925] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1194.653033] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [1194.653109] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [1194.653388] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [1194.653801] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]
<7> [1194.653808] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7> [1194.654340] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1194.654432] xe 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88814a5df6e0 (2)
<7> [1194.654445] xe 0000:00:02.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [1194.654491] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1194.655722] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [1194.655848] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1194.655949] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1194.656064] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1194.656070] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1194.656073] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1194.656075] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1194.656078] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1194.656093] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7> [1194.656187] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [1194.656275] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [1194.656762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected
<7> [1194.656846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:
<7> [1194.656850] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1194.656854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1194.656858] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]
<7> [1194.656862] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1194.656986] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<6> [1194.661794] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7> [1194.662148] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7> [1194.684788] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7> [1194.697624] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.739636] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.783632] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.825965] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.827309] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1194.827361] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1194.870967] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.912959] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.912983] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [1194.912999] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [1194.913637] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1194.955969] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1194.997966] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1195.041642] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1195.083643] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1195.084463] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1195.105488] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7> [1195.126647] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1195.168980] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1195.169009] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [1195.169036] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [1195.169073] xe 0000:00:02.0: [drm] *ERROR* Sending link address failed with -5
<7> [1195.169113] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814a5df6e0 (1)
<7> [1195.169848] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1195.172163] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1195.172204] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1195.173008] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1195.175428] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1195.183328] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1195.184417] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1195.185478] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1195.185762] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1195.186018] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1195.186269] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected
<7> [1195.186295] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]
<7> [1195.186307] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1195.186603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected
<7> [1195.186638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]
<7> [1195.186651] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1195.186921] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected
<7> [1195.186927] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7> [1195.186934] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7> [1195.186937] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7> [1195.186941] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7> [1195.186975] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [1195.187001] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600
<7> [1195.187005] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [1195.187021] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0)
<7> [1195.187095] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7> [1195.187106] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7> [1195.189648] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2560x1600 fb: 0x01d9f000
<6> [1195.190035] fbcon: xedrmfb (fb0) is primary device
<7> [1195.190578] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [1195.190705] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000
<7> [1195.190803] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000
<7> [1195.190901] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1
<7> [1195.190997] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]
<7> [1195.191086] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [1195.191166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [1195.191242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [1195.191319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [1195.191394] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [1195.191468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [1195.191542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2560)
<7> [1195.191628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2720)
<7> [1195.191715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2560)
<7> [1195.191802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2720)
<7> [1195.191887] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2608)
<7> [1195.191973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2640)
<7> [1195.192055] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600)
<7> [1195.192125] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600)
<7> [1195.192194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1663)
<7> [1195.192264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1669)
<7> [1195.192334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1800)
<7> [1195.192406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1800)
<7> [1195.192478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2560)
<7> [1195.192551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2720)
<7> [1195.192628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2560)
<7> [1195.192706] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2720)
<7> [1195.192790] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2608)
<7> [1195.192874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2640)
<7> [1195.192955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600)
<7> [1195.193033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600)
<7> [1195.193101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1663)
<7> [1195.193168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1669)
<7> [1195.193235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1800)
<7> [1195.193304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1800)
<7> [1195.193384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [1195.193463] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [1195.193544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [1195.193631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [1195.193712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C20
<7> [1195.193792] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [1195.193870] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c20pll_hw_state:
<7> [1195.193955] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [1195.194035] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [1195.194106] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[0] = 0x0000
<7> [1195.194176] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[1] = 0x0000
<7> [1195.194247] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[2] = 0x0000
<7> [1195.194319] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[3] = 0x0000
<7> [1195.194389] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[4] = 0x0000
<7> [1195.194458] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[5] = 0x0000
<7> [1195.194527] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[6] = 0x0000
<7> [1195.194594] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[7] = 0x0000
<7> [1195.194686] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[8] = 0x0000
<7> [1195.194768] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[9] = 0x0000
<7> [1195.194848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [1195.194932] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7> [1195.195013] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 51200, rem: 0, den: 1,
<7> [1195.195093] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 175, tx_clk_div: 0.
<7> [1195.195159] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7> [1195.195224] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7> [1195.195288] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xb4, pll[1] = 0x0, pll[2] = 0x3e, pll[3] = 0x1
<7> [1195.195353] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [1195.195417] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [1195.195481] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xc8, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [1195.195547] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23
<7> [1195.195620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 18)
<7> [1195.195701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 0, found 675000)
<7> [1195.195785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)
<7> [1195.195869] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset
<7> [1195.195999] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [1195.196058] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [1195.196115] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942
<7> [1195.196172] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (3942 - 4096), size 0 -> 154
<7> [1195.196227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [1195.196281] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0
<7> [1195.196334] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204
<7> [1195.196386] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210
<7> [1195.196450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4700160 num active planes 1
<7> [1195.196533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4936 qgv_peak_bw: 38400
<7> [1195.196635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4936 qgv_peak_bw: 38400
<7> [1195.196725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4936 qgv_peak_bw: 38400
<7> [1195.196812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4936 qgv_peak_bw: 38400
<7> [1195.196900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4936
<7> [1195.196986] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (587520 kHz) > [CRTC:88:pipe A] min cdclk (0 kHz)
<7> [1195.197069] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (91800 kHz) > old min cdclk (0 kHz)
<7> [1195.197144] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing
<7> [1195.197217] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 612000 kHz, actual 612000 kHz
<7> [1195.197289] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 3, actual 3
<7> [1195.197380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset]
<7> [1195.197454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [1195.197531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
<7> [1195.197609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [1195.197713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [1195.197801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [1195.197887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [1195.197970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8214124, data_n: 8388608, link_m: 912680, link_n: 524288, tu: 64
<7> [1195.198053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [1195.198125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [1195.198191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [1195.198256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: enabled, panel replay: enabled, selective fetch: enabled
<7> [1195.198321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [1195.198388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [1195.198455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 6, length 16
<7> [1195.198521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [1195.198586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [1195.198670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [1195.198749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [1195.198827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [1195.198905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [1195.198982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7> [1195.199052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1800, vmax: 1800, flipline: 1800, pipeline full: 0, guardband: 200 vsync start: 137, vsync end: 131
<7> [1195.199119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1600, vmax vblank: 1600, vmin vtotal: 1800, vmax vtotal: 1800
<7> [1195.199187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1195.199254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1195.199319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa
<7> [1195.199385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x40 0xa
<7> [1195.199451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa
<7> [1195.199516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 675000, pipe src: 2560x1600+0+0, pixel rate 1175040
<7> [1195.199583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 19, ips linetime: 0
<7> [1195.199664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [1195.199743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [1195.199824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [1195.199904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0xa4cb8, dpll_md: 0xb42110, fp0: 0x13e, fp1: 0x1000000
<7> [1195.199983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [1195.200062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [1195.200138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [1195.200208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [1195.200275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [1195.200340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [1195.200404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [1195.200467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [1195.200534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [1195.200603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [1195.200694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [1195.200772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [1195.200848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2560x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [1195.200927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [1195.201003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2560.000000x1600.000000+0.000000+0.000000 dst: 2560x1600+0+0
<7> [1195.201076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [1195.201139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [1195.201202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [1195.201264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [1195.201327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [1195.201505] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1803071 0x2642a372)
<7> [1195.201625] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 612000 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [1195.201773] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [1195.201874] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1530
<7> [1195.201967] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]
<7> [1195.202033] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]
<7> [1195.202091] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]
<7> [1195.202149] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]
<7> [1195.202207] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]
<7> [1195.202263] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]
<7> [1195.202318] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]
<7> [1195.202373] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]
<7> [1195.202426] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]
<7> [1195.202479] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]
<7> [1195.202532] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]
<7> [1195.202584] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]
<7> [1195.202654] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]
<7> [1195.202720] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [1195.202883] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [1195.202953] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)
<7> [1195.203293] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on
<7> [1195.203380] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [1195.203488] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [1195.212669] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1195.212789] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on
<7> [1195.212885] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b
<7> [1195.287730] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1195.421685] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1195.425126] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84
<7> [1195.426777] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [1195.427589] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [1195.428762] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [1195.429841] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [1195.430796] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK
<7> [1195.431063] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [1195.448965] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [1195.449327] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 675000, lane count = 4
<7> [1195.450074] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [1195.450508] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [1195.450823] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [1195.451168] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 4518
<7> [1195.454767] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay
<7> [1195.456319] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]
<7> [1195.456590] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<6> [1195.459560] Console: switching to colour frame buffer device 160x50
<6> [1195.466751] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7> [1195.475705] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7> [1195.475972] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [1195.475996] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [1195.476039] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [1195.476364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [1195.476787] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]
<7> [1195.476684] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [1195.476969] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [1195.477102] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7> [1195.477237] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [1195.477548] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [1195.477852] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [1195.478120] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [1195.478381] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [1195.478673] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [1195.478929] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [1195.479183] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [1195.479468] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [1195.479752] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [1195.479813] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1195.480003] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [1195.480253] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [1195.480471] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [1195.480557] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [1195.480834] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [1195.480874] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1195.481080] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [1195.481223] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1195.481326] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [1195.481612] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [1195.481872] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1195.481892] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1195.481903] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1195.481913] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1195.481933] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1195.482010] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7> [1195.482313] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [1195.482608] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [1195.482967] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7> [1195.483218] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7> [1195.483510] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [1195.483862] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [1195.484257] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [1195.484614] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [1195.485543] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:
<7> [1195.485568] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1195.485578] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1195.485588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]
<7> [1195.485598] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1195.487357] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1195.488798] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7> [1195.489401] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [1195.489813] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [1195.490308] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [1195.491017] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [1195.493688] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1195.493731] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1195.494533] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1195.497372] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1195.498509] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1195.500226] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1195.500263] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1195.501102] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1195.503469] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1195.513688] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1195.515513] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1195.517185] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1195.517498] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1195.517770] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1195.518014] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected
<7> [1195.518037] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]
<7> [1195.518046] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1195.518336] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected
<7> [1195.518344] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]
<7> [1195.518351] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1195.521509] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected
<7> [1195.521516] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7> [1195.522805] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7> [1195.522813] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7> [1195.522820] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7> [1195.527909] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [1195.528067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600
<7> [1195.528075] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2560x1600 config
<7> [1195.528845] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0)
<7> [1195.533387] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [1195.533409] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [1195.549485] [IGT] xe_wedged: finished subtest wedged-at-any-timeout, SUCCESS
<7> [1195.551095] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [1195.551287] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [1195.553957] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [1195.553969] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [1195.554049] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]
<7> [1195.554059] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7> [1195.554708] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1195.555344] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [1195.555538] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1195.555772] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1195.556081] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1195.556105] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1195.556118] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1195.556131] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1195.556144] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1195.556196] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7> [1195.556552] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [1195.556904] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [1195.557589] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:
<7> [1195.557598] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1195.557603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1195.557610] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]
<7> [1195.557617] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1195.560261] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1195.560323] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1195.561255] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1195.563990] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1195.565111] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1195.567392] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1195.567434] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1195.568251] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1195.570415] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1195.578194] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1195.579510] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1195.580739] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1195.581113] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1195.581444] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1195.581773] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected
<7> [1195.581813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]
<7> [1195.581832] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1195.582022] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected
<7> [1195.582029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]
<7> [1195.582033] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1195.582163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected
<7> [1195.582168] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7> [1195.582176] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7> [1195.582179] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7> [1195.582182] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7> [1195.582228] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [1195.582259] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600
<7> [1195.582264] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2560x1600 config
<7> [1195.582306] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0)
<7> [1195.587088] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [1195.587325] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [1195.587528] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [1195.587722] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [1195.587869] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<6> [1195.588676] Console: switching to colour dummy device 80x25
<7> [1195.603801] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:206] is removed
<7> [1195.603956] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 3942) -> ( 0 - 0), size 3942 -> 0
<7> [1195.604291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [1195.604970] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [1195.605152] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [1195.605321] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [1195.605607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0
<7> [1195.605892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [1195.606131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [1195.606357] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1195.606575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1195.606817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [1195.607413] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay
<7> [1195.607600] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [1195.612126] xe 0000:00:02.0: [drm:drm_client_release] fbdev
<7> [1195.613813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [1195.614094] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [1195.614346] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [1195.614580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [1195.614844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8214124/8388608 link 912680/524288, found tu 0, data 0/0 link 0/0)
<7> [1195.615062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [1195.615265] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [1195.615462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2560, found 0)
<7> [1195.615689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2720, found 0)
<7> [1195.615873] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2560, found 0)
<7> [1195.616083] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2720, found 0)
<7> [1195.616274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2608, found 0)
<7> [1195.616443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2640, found 0)
<7> [1195.616609] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)
<7> [1195.616810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)
<7> [1195.616981] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1663, found 0)
<7> [1195.617152] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1669, found 0)
<7> [1195.617321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1800, found 0)
<7> [1195.617497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1800, found 0)
<7> [1195.617740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2560, found 0)
<7> [1195.617929] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2720, found 0)
<7> [1195.618120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2560, found 0)
<7> [1195.618293] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2720, found 0)
<7> [1195.618465] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2608, found 0)
<7> [1195.618690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2640, found 0)
<7> [1195.618854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)
<7> [1195.619017] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)
<7> [1195.619170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1663, found 0)
<7> [1195.619337] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1669, found 0)
<7> [1195.619488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1800, found 0)
<7> [1195.619651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1800, found 0)
<7> [1195.619809] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [1195.619962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [1195.620109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [1195.620257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [1195.620398] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 18, found 0)
<7> [1195.620537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 1175040, found 0)
<7> [1195.620692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 1175040, found 0)
<7> [1195.620829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 675000, found 0)
<7> [1195.620958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [1195.621083] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset
<7> [1195.621281] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [1195.621413] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [1195.621584] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (3942 - 4096) -> ( 0 - 0), size 154 -> 0
<7> [1195.621738] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing
<7> [1195.621877] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [1195.622013] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 0, actual 0
<7> [1195.622174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [modeset]
<7> [1195.622313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [1195.622451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [1195.622569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [1195.622727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [1195.622849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [1195.622968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [1195.623270] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [1195.623404] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [1195.624738] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1195.831717] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0
<7> [1195.832102] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [1195.833427] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off
<7> [1195.833666] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [1195.833909] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [1195.833928] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [1195.834302] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short
<7> [1195.887245] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [1195.887632] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7> [1195.887979] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [1195.892214] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [1195.892512] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7> [1195.892795] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [1195.893663] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1195.893963] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A]
<7> [1195.894020] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [1195.894273] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]
<7> [1195.894369] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]
<7> [1195.894598] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]
<7> [1195.894830] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]
<7> [1195.895022] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]
<7> [1195.895205] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]
<7> [1195.895382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]
<7> [1195.895594] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]
<7> [1195.895841] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]
<7> [1195.896025] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]
<7> [1195.896206] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]
<7> [1195.896385] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]
<7> [1195.896603] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]
<7> [1195.896844] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]
<7> [1195.897062] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]
<7> [1195.897285] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [1195.897475] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [1195.897693] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [1195.898131] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [1195.898458] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [1195.898790] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [1195.899094] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [1195.899393] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)
<7> [1195.919883] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [1195.920228] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7> [1195.920522] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 30
<7> [1195.920823] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]
<7> [1195.923790] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:205:eDP-1] removing connector from sysfs
<7> [1195.928942] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:214:DP-1] removing connector from sysfs
<7> [1195.935547] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:226:DP-2] removing connector from sysfs
<7> [1195.948934] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:234:DP-3] removing connector from sysfs
<7> [1195.980050] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1195.990844] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled
<7> [1195.999716] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1196.080250] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
<3> [1196.128296] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
<4> [1196.128507] usb usb4-port1: config error
<7> [1196.163567] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (231 ms remaining)
<7> [1196.400737] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [1196.481539] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1196.482138] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1196.484474] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814a5df6e0 (0)
<7> [1196.486467] xe 0000:00:02.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff88814a5df6e0 (0)
<7> [1196.486947] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1196.487617] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (dp-alt -> disconnected) pin assignment: E max lanes: 4
<7> [1196.495667] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [1196.503145] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [1196.516139] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR
<6> [1196.570831] xe 0000:00:02.0: vgaarb: deactivate vga console
<6> [1196.578960] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7> [1196.578971] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7> [1196.579068] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7> [1196.579142] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<7> [1196.587477] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7> [1196.587603] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display
<7> [1196.587689] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [1196.587785] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7> [1196.587891] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7> [1196.587963] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7> [1196.588029] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7> [1196.588087] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7> [1196.588142] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7> [1196.588213] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7> [1196.588272] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5
<7> [1196.588350] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7> [1196.588426] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7> [1196.588500] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7> [1196.588577] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7> [1196.588661] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7> [1196.588750] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7> [1196.588844] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7> [1196.588932] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7> [1196.589021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7> [1196.589093] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1196.589166] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1196.589238] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7> [1196.589310] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1196.589383] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1196.589455] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1196.589526] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7> [1196.589595] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1196.589678] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1196.589751] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1196.589831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7> [1196.589912] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1196.589991] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1196.590070] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1196.590145] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7> [1196.590216] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1196.590284] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1196.590351] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1196.590416] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7> [1196.590482] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7> [1196.590547] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7> [1196.590612] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7> [1196.590707] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [1196.591147] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [1196.591253] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262
<7> [1196.591345] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [1196.591433] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [1196.591518] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [1196.591604] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [1196.591708] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)
<7> [1196.591806] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [1196.591900] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [1196.591997] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [1196.592088] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)
<7> [1196.592165] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [1196.592241] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [1196.592319] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [1196.592399] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [1196.592471] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [1196.592543] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [1196.592614] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7> [1196.592704] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [1196.592793] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [1196.592890] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [1196.592990] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [1196.593069] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [1196.593139] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7> [1196.593207] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7> [1196.593276] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7> [1196.593350] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7> [1196.593442] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [1196.593539] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [1196.593717] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [1196.593797] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os
<7> [1196.593915] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [1196.594039] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [1196.594188] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7> [1196.594278] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [1196.594352] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [1196.594427] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [1196.594523] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [1196.594625] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [1196.594744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [1196.594870] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [1196.594985] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [1196.595103] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7> [1196.595479] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7> [1196.595742] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [1196.595835] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7> [1196.595903] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7> [1196.595968] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec)
<7> [1196.596030] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec)
<7> [1196.596090] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec)
<7> [1196.596142] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec)
<7> [1196.596195] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec)
<7> [1196.597089] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [1196.597180] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [1196.597257] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [1196.597332] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7> [1196.597408] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7> [1196.597486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7> [1196.597573] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [1196.597667] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7> [1196.597751] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7> [1196.597833] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7> [1196.597915] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7> [1196.598051] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7> [1196.598259] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7> [1196.598509] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7> [1196.598817] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [1196.599020] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7> [1196.599243] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7> [1196.599439] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7> [1196.599635] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7> [1196.599915] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7> [1196.600108] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7> [1196.600325] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7> [1196.600520] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [1196.600734] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7> [1196.600923] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7> [1196.601143] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7> [1196.601331] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7> [1196.601519] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7> [1196.601727] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7> [1196.601951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<6> [1196.614102] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7> [1196.622866] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7> [1196.629658] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [1196.629918] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [1196.630154] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [1196.630428] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT)
<7> [1196.630812] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A]
<7> [1196.631021] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7> [1196.631121] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7> [1196.631216] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7> [1196.631305] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [1196.631386] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7> [1196.631464] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7> [1196.631543] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7> [1196.631619] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7> [1196.631733] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7> [1196.631856] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0
<7> [1196.631982] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0
<7> [1196.632084] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7> [1196.632185] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7> [1196.632285] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7> [1196.632383] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7> [1196.632512] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [1196.632641] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [1196.633666] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on
<7> [1196.633735] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [1196.633832] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [1196.643735] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1196.643837] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [1196.643918] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 panel power wasn't enabled
<7> [1196.848880] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84
<7> [1196.849347] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID \a\001\010\a\010 HW-rev 7.8 SW-rev 3.203 quirks 0x0000
<7> [1196.849877] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 06 83 81 0d 00
<7> [1196.850869] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 4
<7> [1196.851322] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7> [1196.851778] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] Panel replay selective_update is supported by panel
<7> [1196.853567] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1196.863822] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1196.863840] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1196.863849] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1196.863857] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1196.863866] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1196.863981] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1196.864183] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using alternate EDID fixed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1196.864616] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms)
<7> [1196.865133] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0
<7> [1196.865403] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] AUX Backlight Control Supported!
<7> [1196.865631] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Using VESA eDP backlight controls
<7> [1196.865883] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: seamless
<7> [1196.866313] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=0
<7> [1196.866349] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight enable is controlled through PWM
<7> [1196.866585] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight level is controlled through PWM
<7> [1196.866854] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz
<7> [1196.867102] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7> [1196.867351] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using AUX VESA interface for backlight control
<7> [1196.867580] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, disabled, brightness 0/192000
<7> [1196.868004] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7> [1196.868193] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7> [1196.868373] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7> [1196.868548] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7> [1196.868796] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7> [1196.869011] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [1196.869523] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7> [1196.869824] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: dp-alt)
<7> [1196.870085] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> dp-alt) pin assignment: E max lanes: 4
<7> [1196.870290] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1]
<7> [1196.871345] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7> [1196.871613] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7> [1196.871869] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2]
<7> [1196.872503] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7> [1196.872773] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7> [1196.872983] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3]
<7> [1196.873793] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled
<7> [1196.873992] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7> [1196.874175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7> [1196.874325] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [1196.874467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7> [1196.874605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7> [1196.874767] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7> [1196.874904] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7> [1196.875035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7> [1196.875161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7> [1196.875284] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7> [1196.875407] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7> [1196.875532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7> [1196.875673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7> [1196.875796] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7> [1196.875914] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7> [1196.876029] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7> [1196.876141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7> [1196.876248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7> [1196.876355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7> [1196.876459] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7> [1196.876561] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: disabled, pipe A
<7> [1196.876695] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: E max lanes: 4
<7> [1196.876795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7> [1196.876893] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A
<7> [1196.876993] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B
<7> [1196.877087] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C
<7> [1196.877184] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4
<7> [1196.877279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7> [1196.877369] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A
<7> [1196.877458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B
<7> [1196.877545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C
<7> [1196.877632] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4
<7> [1196.877736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7> [1196.877821] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A
<7> [1196.877902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B
<7> [1196.877991] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C
<7> [1196.878093] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: disabled
<7> [1196.878195] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled
<7> [1196.878290] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled
<7> [1196.878372] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled
<7> [1196.878449] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [1196.878524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7> [1196.878598] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7> [1196.878688] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7> [1196.878762] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7> [1196.878835] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7> [1196.878909] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7> [1196.878982] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7> [1196.879054] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7> [1196.879124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7> [1196.879192] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7> [1196.879257] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7> [1196.879319] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7> [1196.879381] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7> [1196.879440] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7> [1196.879499] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7> [1196.879559] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7> [1196.879619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7> [1196.879703] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [1196.879765] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [1196.879825] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [1196.879882] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [1196.879974] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [1196.880060] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [1196.880164] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no
<7> [1196.880278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]
<7> [1196.880360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7> [1196.880441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<6> [1196.881953] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4
<7> [1196.884161] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7
<7> [1196.884228] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7> [1196.884280] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7> [1196.884329] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [1196.884377] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc
<7> [1196.884424] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7> [1196.884470] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [1196.884515] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [1196.884562] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [1196.884608] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [1196.884668] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [1196.884718] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [1196.884773] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [1196.884828] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [1196.884882] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [1196.884973] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [1196.886400] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1650MHz (req 2000MHz), status = 0x00000072 [0x39/00]
<7> [1196.895715] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 1650MHz, status = 0x8002F034, timeouts = 0
<7> [1196.896290] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled
<7> [1196.896385] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,000000ff
<7> [1196.896459] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,000000ff
<7> [1196.896530] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff
<7> [1196.896600] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16
<7> [1196.896691] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff
<6> [1197.421476] xe 0000:00:02.0: [drm] GT0: ccs1 fused off
<6> [1197.421481] xe 0000:00:02.0: [drm] GT0: ccs2 fused off
<6> [1197.421482] xe 0000:00:02.0: [drm] GT0: ccs3 fused off
<7> [1197.421618] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7> [1197.421732] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [1197.421832] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [1197.421920] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [1197.422056] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7> [1197.422174] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7> [1197.422310] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7> [1197.422391] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [1197.422483] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [1197.422567] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [1197.423704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7> [1197.423787] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7> [1197.423878] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7> [1197.423960] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7> [1197.424033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7> [1197.424105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7> [1197.424167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7> [1197.424230] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7> [1197.424287] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7> [1197.424344] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [1197.424401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [1197.424457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [1197.424512] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [1197.424567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [1197.424621] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [1197.424681] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [1197.424739] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [1197.424799] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [1197.424868] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [1197.424945] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [1197.425021] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [1197.425093] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [1197.425158] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [1197.425217] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [1197.425272] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [1197.425326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7> [1197.425384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000
<7> [1197.425443] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7> [1197.425500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7> [1197.425557] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7> [1197.425612] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7> [1197.425672] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7> [1197.425731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7> [1197.425805] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7> [1197.425887] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7> [1197.425968] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08400840
<7> [1197.426045] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7> [1197.426116] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe530] = 0x00000400
<7> [1197.426186] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7> [1197.426251] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7> [1197.426398] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7> [1197.426458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000
<7> [1197.426519] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7> [1197.426575] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7> [1197.426703] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7> [1197.426765] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000
<7> [1197.426830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [1197.426903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7> [1197.427065] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7> [1197.427126] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000
<7> [1197.427185] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7> [1197.427243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7> [1197.427298] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7> [1197.427349] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7> [1197.427400] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7> [1197.427640] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
<7> [1197.427742] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7
<7> [1197.427801] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7> [1197.427865] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7> [1197.427935] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [1197.428002] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc
<7> [1197.428061] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7> [1197.428118] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [1197.428174] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [1197.428228] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [1197.428283] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [1197.428331] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [1197.428379] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [1197.428427] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [1197.428477] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [1197.428554] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7> [1197.428646] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7> [1197.429078] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd16000 for xe_guc_init_post_hwconfig [xe]
<7> [1197.430612] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 48 ext-regs.
<7> [1197.448198] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056)
<7> [1197.449327] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1900MHz (req 2000MHz), status = 0x00000072 [0x39/00]
<7> [1197.453758] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 2000MHz (req 2000MHz), status = 0x00000088 [0x44/00]
<7> [1197.453858] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 2000MHz (req 2000MHz), status = 0x80000534 [0x1A/05]
<7> [1197.456613] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 2000MHz (req = 2000MHz), before = 1900MHz, status = 0x8002F034, timeouts = 0
<7> [1197.456927] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled
<7> [1197.457901] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords
<7> [1197.458029] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7> [1197.458115] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7> [1197.458185] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7> [1197.458255] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7> [1197.458317] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7> [1197.458375] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7> [1197.458434] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7> [1197.458496] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7> [1197.460524] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords
<7> [1197.460602] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [1197.460693] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7> [1197.462223] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords
<7> [1197.462303] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6> [1197.468657] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4
<7> [1197.472787] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7
<7> [1197.472870] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [1197.472930] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7> [1197.472978] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [1197.473024] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a
<7> [1197.473069] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7> [1197.473113] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [1197.473158] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [1197.473202] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [1197.473245] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [1197.473288] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [1197.473331] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [1197.473374] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [1197.473418] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6> [1197.474078] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6> [1197.475629] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429
<6> [1197.476628] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7> [1197.476705] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [1197.476790] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [1197.478255] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7> [1197.478472] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7> [1197.497809] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7> [1197.498315] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled
<7> [1197.498512] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000
<7> [1197.498661] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000
<7> [1197.498864] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000
<7> [1197.499004] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16
<7> [1197.499138] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f
<6> [1197.499293] xe 0000:00:02.0: [drm] GT1: vcs1 fused off
<6> [1197.499297] xe 0000:00:02.0: [drm] GT1: vcs2 fused off
<6> [1197.499300] xe 0000:00:02.0: [drm] GT1: vcs3 fused off
<6> [1197.499304] xe 0000:00:02.0: [drm] GT1: vcs4 fused off
<6> [1197.499307] xe 0000:00:02.0: [drm] GT1: vcs5 fused off
<6> [1197.499311] xe 0000:00:02.0: [drm] GT1: vcs6 fused off
<6> [1197.499314] xe 0000:00:02.0: [drm] GT1: vcs7 fused off
<6> [1197.499317] xe 0000:00:02.0: [drm] GT1: vecs1 fused off
<6> [1197.499320] xe 0000:00:02.0: [drm] GT1: vecs2 fused off
<6> [1197.499324] xe 0000:00:02.0: [drm] GT1: vecs3 fused off
<7> [1197.499464] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7> [1197.499757] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7> [1197.500015] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7> [1197.501971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7> [1197.502123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7> [1197.502271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7> [1197.502409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7> [1197.502545] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7> [1197.502699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7> [1197.502838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7> [1197.502977] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7> [1197.503102] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7> [1197.503220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7> [1197.503343] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7> [1197.503457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7> [1197.503565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [1197.503687] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [1197.503794] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [1197.503897] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [1197.503996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [1197.504093] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [1197.504203] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [1197.504308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [1197.504399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [1197.504492] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [1197.504585] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [1197.504688] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [1197.504781] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [1197.504870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [1197.504956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [1197.505039] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [1197.505123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7> [1197.505219] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000
<7> [1197.505314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7> [1197.505924] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7> [1197.506032] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000
<7> [1197.506126] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7> [1197.506691] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7> [1197.506780] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000
<7> [1197.506868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7> [1197.507633] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled
<7> [1197.507770] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7
<7> [1197.507847] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [1197.507922] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7> [1197.507991] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [1197.508058] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a
<7> [1197.508123] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7> [1197.508188] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [1197.508251] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [1197.508313] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [1197.508373] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [1197.508435] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [1197.508496] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [1197.508556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [1197.508615] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7> [1197.508729] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7> [1197.508838] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7> [1197.510865] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x197e000 for xe_guc_init_post_hwconfig [xe]
<7> [1197.537048] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056)
<7> [1197.538258] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7> [1197.538356] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7> [1197.538407] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7> [1197.557985] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7> [1197.558394] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled
<7> [1197.559836] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords
<7> [1197.560062] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7> [1197.563340] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords
<7> [1197.563532] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7> [1197.566914] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords
<7> [1197.567102] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7> [1197.613700] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7> [1197.614482] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0
<7> [1197.614853] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines:
<7> [1197.615189] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [1197.616011] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008
<7> [1197.616491] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108
<7> [1197.617057] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208
<7> [1197.617565] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308
<7> [1197.618177] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8
<7> [1197.618700] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008
<7> [1197.619187] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108
<7> [1197.619712] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208
<7> [1197.620245] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308
<7> [1197.620815] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8
<7> [1197.621284] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008
<7> [1197.621798] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108
<7> [1197.622250] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208
<7> [1197.622758] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308
<7> [1197.623143] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8
<7> [1197.623979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [1197.624409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [1197.624868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1197.625258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [1197.625612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [1197.626173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]
<7> [1197.626529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]
<7> [1197.626895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]
<7> [1197.627335] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)
<7> [1197.627652] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7> [1197.628000] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]
<7> [1197.628316] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]
<7> [1197.636773] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs
<7> [1197.640203] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered
<7> [1197.640771] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card2-eDP-1', has fwnode: yes
<7> [1197.642339] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card2-eDP-1
<7> [1197.645098] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event
<7> [1197.645280] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs
<7> [1197.646926] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card2-DP-1
<7> [1197.650103] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event
<7> [1197.650220] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs
<7> [1197.651537] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card2-DP-2
<7> [1197.653336] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event
<7> [1197.653417] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs
<7> [1197.654407] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card2-DP-3
<7> [1197.655472] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event
<6> [1197.655522] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 2
<7> [1197.655534] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6> [1197.665836] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [1197.668993] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35
<7> [1197.669596] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [1197.669733] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [1197.670537] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7> [1197.671583] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping
<7> [1197.671662] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7> [1197.671772] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7> [1197.671843] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [1197.672297] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1197.672558] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4
<7> [1197.672819] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [1197.673731] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1197.678690] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1197.678708] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1197.680108] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1197.682985] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1197.684405] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1197.688340] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1197.688350] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1197.689704] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1197.693694] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1197.707368] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1197.708896] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1197.715676] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1197.715702] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1197.715906] xe 0000:00:02.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff88814a5dee20 (2)
<7> [1197.719394] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814a5dee20 (1)
<7> [1197.719406] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1197.719511] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1197.719609] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1197.719723] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [1197.719942] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1197.720043] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1197.720662] xe 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88814a5dee20 (2)
<7> [1197.720671] xe 0000:00:02.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table
<7> [1197.721087] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1197.722528] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [1197.723112] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [1197.723514] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1197.723626] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1197.723797] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [1197.723886] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [1197.723980] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [1197.723994] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]
<7> [1197.724002] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7> [1197.724497] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1197.724797] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [1197.724947] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1197.725049] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1197.725171] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1197.725182] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1197.725186] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1197.725189] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1197.725193] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1197.725221] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7> [1197.725316] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [1197.725402] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [1197.725924] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected
<7> [1197.726018] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:
<7> [1197.726022] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1197.726026] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1197.726030] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]
<7> [1197.726034] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1197.726182] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [1197.726335] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<6> [1197.728785] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7> [1197.729470] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7> [1197.752123] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7> [1197.767696] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1197.809705] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1197.853708] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1197.896040] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1197.897400] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1197.897442] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1197.939711] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1197.940538] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1197.983042] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1197.983075] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [1197.983103] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<7> [1198.026720] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1198.069252] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1198.070051] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1198.112043] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1198.154049] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1198.155394] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1198.176100] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7> [1198.197434] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1198.239726] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5
<7> [1198.239750] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5
<7> [1198.239776] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5
<3> [1198.239818] xe 0000:00:02.0: [drm] *ERROR* Sending link address failed with -5
<7> [1198.239859] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814a5dee20 (1)
<7> [1198.242685] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1198.242751] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1198.243591] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1198.246032] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1198.254400] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1198.255469] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1198.256544] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1198.256847] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1198.257110] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1198.257369] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected
<7> [1198.257389] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]
<7> [1198.257401] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1198.257735] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected
<7> [1198.257748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]
<7> [1198.257760] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1198.257974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected
<7> [1198.257980] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7> [1198.257988] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7> [1198.257993] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7> [1198.257998] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7> [1198.258031] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [1198.258053] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600
<7> [1198.258058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [1198.258081] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0)
<7> [1198.258142] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7> [1198.258152] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7> [1198.261145] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2560x1600 fb: 0x01d9f000
<6> [1198.261604] fbcon: xedrmfb (fb0) is primary device
<7> [1198.262973] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [1198.263076] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000
<7> [1198.263155] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000
<7> [1198.263235] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1
<7> [1198.263314] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]
<7> [1198.263394] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [1198.263471] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [1198.263545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [1198.263619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [1198.263705] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [1198.263800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [1198.263893] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2560)
<7> [1198.263984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2720)
<7> [1198.264073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2560)
<7> [1198.264147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2720)
<7> [1198.264221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2608)
<7> [1198.264307] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2640)
<7> [1198.264391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600)
<7> [1198.264475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600)
<7> [1198.264557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1663)
<7> [1198.264626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1669)
<7> [1198.264707] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1800)
<7> [1198.264789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1800)
<7> [1198.264871] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2560)
<7> [1198.264950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2720)
<7> [1198.265031] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2560)
<7> [1198.265107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2720)
<7> [1198.265173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2608)
<7> [1198.265239] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2640)
<7> [1198.265306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600)
<7> [1198.265371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600)
<7> [1198.265437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1663)
<7> [1198.265502] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1669)
<7> [1198.265567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1800)
<7> [1198.265632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1800)
<7> [1198.265707] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [1198.265785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [1198.265868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [1198.265950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [1198.266031] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C20
<7> [1198.266105] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [1198.266174] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c20pll_hw_state:
<7> [1198.266246] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [1198.266318] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [1198.266389] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[0] = 0x0000
<7> [1198.266459] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[1] = 0x0000
<7> [1198.266528] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[2] = 0x0000
<7> [1198.266596] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[3] = 0x0000
<7> [1198.266664] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[4] = 0x0000
<7> [1198.266754] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[5] = 0x0000
<7> [1198.266837] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[6] = 0x0000
<7> [1198.266918] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[7] = 0x0000
<7> [1198.266999] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[8] = 0x0000
<7> [1198.267075] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[9] = 0x0000
<7> [1198.267142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [1198.267211] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7> [1198.267281] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 51200, rem: 0, den: 1,
<7> [1198.267351] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 175, tx_clk_div: 0.
<7> [1198.267420] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7> [1198.267487] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7> [1198.267555] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xb4, pll[1] = 0x0, pll[2] = 0x3e, pll[3] = 0x1
<7> [1198.267622] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [1198.267700] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [1198.267780] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xc8, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [1198.267860] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23
<7> [1198.267939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 18)
<7> [1198.268022] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 0, found 675000)
<7> [1198.268092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)
<7> [1198.268161] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset
<7> [1198.268268] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [1198.268326] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [1198.268383] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942
<7> [1198.268436] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (3942 - 4096), size 0 -> 154
<7> [1198.268495] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [1198.268553] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0
<7> [1198.268615] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204
<7> [1198.268679] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210
<7> [1198.268785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4700160 num active planes 1
<7> [1198.268893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4936 qgv_peak_bw: 38400
<7> [1198.268998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4936 qgv_peak_bw: 38400
<7> [1198.269093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4936 qgv_peak_bw: 38400
<7> [1198.269179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4936 qgv_peak_bw: 38400
<7> [1198.269262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4936
<7> [1198.269340] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (587520 kHz) > [CRTC:88:pipe A] min cdclk (0 kHz)
<7> [1198.269403] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (91800 kHz) > old min cdclk (0 kHz)
<7> [1198.269477] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing
<7> [1198.269549] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 612000 kHz, actual 612000 kHz
<7> [1198.269619] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 3, actual 3
<7> [1198.269721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset]
<7> [1198.269806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [1198.269897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
<7> [1198.269984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [1198.270070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [1198.270159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [1198.270240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [1198.270318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8214124, data_n: 8388608, link_m: 912680, link_n: 524288, tu: 64
<7> [1198.270398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [1198.270474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [1198.270550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [1198.270624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: enabled, panel replay: enabled, selective fetch: enabled
<7> [1198.270706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [1198.270793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [1198.270876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 6, length 16
<7> [1198.270956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [1198.271036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [1198.271113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [1198.271177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [1198.271242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [1198.271306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [1198.271370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7> [1198.271434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1800, vmax: 1800, flipline: 1800, pipeline full: 0, guardband: 200 vsync start: 137, vsync end: 131
<7> [1198.271499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1600, vmax vblank: 1600, vmin vtotal: 1800, vmax vtotal: 1800
<7> [1198.271563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1198.271627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1198.271763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa
<7> [1198.271847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x40 0xa
<7> [1198.271932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa
<7> [1198.272008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 675000, pipe src: 2560x1600+0+0, pixel rate 1175040
<7> [1198.272084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 19, ips linetime: 0
<7> [1198.272157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [1198.272222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [1198.272285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [1198.272347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0xa4cb8, dpll_md: 0xb42110, fp0: 0x13e, fp1: 0x1000000
<7> [1198.272410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [1198.272473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [1198.272541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [1198.272613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [1198.272680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [1198.272775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [1198.272860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [1198.272940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [1198.273020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [1198.273099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [1198.273175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [1198.273242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [1198.273307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2560x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [1198.273371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [1198.273437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2560.000000x1600.000000+0.000000+0.000000 dst: 2560x1600+0+0
<7> [1198.273502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [1198.273566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [1198.273629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [1198.273709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [1198.273789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [1198.274000] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1803071 0x2642a372)
<7> [1198.274271] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 612000 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [1198.274387] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [1198.274469] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1530
<7> [1198.274545] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]
<7> [1198.274607] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]
<7> [1198.274668] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]
<7> [1198.274752] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]
<7> [1198.274831] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]
<7> [1198.274904] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]
<7> [1198.274972] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]
<7> [1198.275038] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]
<7> [1198.275103] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]
<7> [1198.275163] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]
<7> [1198.275215] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]
<7> [1198.275268] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]
<7> [1198.275320] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]
<7> [1198.275374] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [1198.275520] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [1198.275580] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)
<7> [1198.275927] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on
<7> [1198.276007] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [1198.276107] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [1198.286231] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1198.286341] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on
<7> [1198.286426] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b
<7> [1198.359966] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1
<7> [1198.494863] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [1198.498290] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84
<7> [1198.499913] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [1198.500630] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [1198.501627] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [1198.502654] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [1198.503565] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK
<7> [1198.503817] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [1198.521033] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [1198.521282] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 675000, lane count = 4
<7> [1198.521915] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [1198.522235] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [1198.522451] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [1198.522726] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 4518
<7> [1198.526521] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay
<7> [1198.528420] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]
<7> [1198.528757] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<6> [1198.531712] Console: switching to colour frame buffer device 160x50
<6> [1198.538839] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7> [1198.548784] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [1198.548804] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [1198.548917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]
<7> [1198.548763] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7> [1198.548935] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7> [1198.549114] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [1198.549428] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [1198.549764] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [1198.550083] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [1198.550248] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1198.550397] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [1198.550723] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [1198.550896] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [1198.551025] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [1198.551255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1198.551324] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [1198.551612] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [1198.551624] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1198.552037] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1198.552055] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1198.552065] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1198.552074] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1198.552084] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1198.551931] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [1198.552128] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7> [1198.552285] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [1198.552438] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [1198.552626] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [1198.552768] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [1198.552935] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [1198.553260] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [1198.553538] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [1198.553821] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:
<7> [1198.553834] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1198.553846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1198.553857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]
<7> [1198.553842] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [1198.553868] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1198.554149] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [1198.554272] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [1198.554425] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [1198.554715] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [1198.555055] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [1198.555324] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [1198.556827] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7> [1198.557088] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [1198.557426] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [1198.557784] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [1198.558094] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [1198.559281] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1198.559335] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1198.560755] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1198.561776] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [1198.562473] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [1198.563209] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [1198.563370] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<6> [1198.565040] [IGT] xe_wedged: exiting, ret=0
<7> [1198.565577] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1198.566778] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1198.569100] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1198.569135] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1198.569957] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1198.572268] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [1198.580758] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00
<7> [1198.581970] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff
<7> [1198.583084] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [1198.583406] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000
<7> [1198.583740] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000
<7> [1198.584057] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected
<7> [1198.584086] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]
<7> [1198.584098] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7> [1198.584447] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected
<7> [1198.584456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]
<7> [1198.584464] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7> [1198.584846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected
<7> [1198.584856] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7> [1198.584867] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7> [1198.584872] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7> [1198.584878] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7> [1198.584930] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [1198.584966] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600
<7> [1198.584975] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2560x1600 config
<7> [1198.585015] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0)
<7> [1198.586956] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [1198.587248] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [1198.589410] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [1198.601546] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [1198.601555] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [1198.602059] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]
<7> [1198.602071] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7> [1198.602644] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00
<7> [1198.606582] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [1198.606690] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1198.606814] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000
<7> [1198.607081] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz
<7> [1198.607087] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [1198.607090] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [1198.607093] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7
<7> [1198.607099] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0
<7> [1198.607126] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7> [1198.607220] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [1198.607303] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [1198.607961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:
<7> [1198.607969] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1198.607973] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa
<7> [1198.607976] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]
<7> [1198.607980] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7> [1198.612147] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1198.612166] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1198.613158] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [1198.615414] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00
<7> [1198.616280] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000
<7> [1198.619078] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81
<7> [1198.619092] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81
<7> [1198.619897] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020
<7> [1198.622134] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
|