igt@xe_configfs@engines-allowed on re-lnl-1@xe-3643-99f4b32d88cb9718c944d44ea96cb04f4f70a773 Test details

Detail	Value
Duration	0.98 seconds
Igt-Version	IGT-Version: 2.1-g8a840cd64 (x86_64) (Linux: 6.17.0-rc3-lgci-xe-xe-3643-99f4b32d88cb9718c+ x86_64)
Out	Using IGT_SRANDOM=1756538687 for randomisation Opened device: /dev/dri/card0 Starting subtest: engines-allowed Subtest engines-allowed: SUCCESS (0.983s)
Err	Starting subtest: engines-allowed Subtest engines-allowed: SUCCESS (0.983s)
Dmesg Scroll to first warning	<6> [371.198230] Console: switching to colour dummy device 80x25 <6> [371.198559] [IGT] xe_configfs: executing <7> [371.217378] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [371.217933] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [371.222487] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [371.224769] [IGT] xe_configfs: starting subtest engines-allowed <7> [371.225678] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [371.225859] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [371.226388] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [371.226630] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [371.226770] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [371.240709] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:206] is removed <7> [371.240904] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 3942) -> ( 0 - 0), size 3942 -> 0 <7> [371.241414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [371.241595] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [371.241755] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [371.241899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [371.242221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [371.242475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [371.242701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [371.242924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [371.243177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [371.243420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [371.246063] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [371.246411] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [371.248253] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [371.252083] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [371.252276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [371.252425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [371.252567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [371.252703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8214124/8388608 link 912680/524288, found tu 0, data 0/0 link 0/0) <7> [371.252833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [371.252960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [371.253097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2560, found 0) <7> [371.253216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2720, found 0) <7> [371.253327] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2560, found 0) <7> [371.253436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2720, found 0) <7> [371.253545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2608, found 0) <7> [371.253650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2640, found 0) <7> [371.253753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0) <7> [371.253854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0) <7> [371.253954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1663, found 0) <7> [371.254050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1669, found 0) <7> [371.254184] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1800, found 0) <7> [371.254283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1800, found 0) <7> [371.254382] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2560, found 0) <7> [371.254479] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2720, found 0) <7> [371.254579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2560, found 0) <7> [371.254680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2720, found 0) <7> [371.254780] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2608, found 0) <7> [371.254881] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2640, found 0) <7> [371.254984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0) <7> [371.255109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0) <7> [371.255211] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1663, found 0) <7> [371.255317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1669, found 0) <7> [371.255423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1800, found 0) <7> [371.255529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1800, found 0) <7> [371.255638] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [371.255746] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [371.255854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [371.255966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [371.256092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 18, found 0) <7> [371.256204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 1175040, found 0) <7> [371.256324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 1175040, found 0) <7> [371.256447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 675000, found 0) <7> [371.256572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0) <7> [371.256701] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7> [371.257133] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [371.257304] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [371.257491] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (3942 - 4096) -> ( 0 - 0), size 154 -> 0 <7> [371.257664] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing <7> [371.257834] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [371.258004] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 0, actual 0 <7> [371.258241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [modeset] <7> [371.258446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [371.258623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [371.258792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [371.258966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [371.259167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [371.259345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [371.260099] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [371.260346] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [371.463916] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0 <7> [371.465053] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [371.468423] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7> [371.468710] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [371.469116] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [371.469483] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7> [371.469510] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off <7> [371.469789] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time <7> [371.470030] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [371.523374] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [371.523697] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7> [371.523978] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [371.529221] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [371.529474] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7> [371.529705] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [371.530303] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [371.530722] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [371.531396] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7> [371.531442] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A] <7> [371.531662] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1] <7> [371.531676] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7> [371.531858] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A] <7> [371.532043] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B] <7> [371.532220] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C] <7> [371.532443] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2] <7> [371.532630] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A] <7> [371.532851] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B] <7> [371.533042] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C] <7> [371.533216] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3] <7> [371.533413] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A] <7> [371.533575] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B] <7> [371.533734] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C] <7> [371.533891] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7> [371.534209] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no) <7> [371.534450] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [371.534635] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [371.534997] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7> [371.535313] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [371.535574] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [371.536067] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [371.536348] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [371.556614] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [371.556889] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7> [371.557085] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [371.557302] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7> [371.577503] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:205:eDP-1] removing connector from sysfs <7> [371.582994] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:214:DP-1] removing connector from sysfs <7> [371.587479] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:226:DP-2] removing connector from sysfs <7> [371.595349] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:234:DP-3] removing connector from sysfs <7> [371.618332] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4 <7> [371.618496] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [371.629409] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled <7> [371.698884] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled <7> [371.719317] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1 <7> [371.768400] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (261 ms remaining) <7> [372.036265] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [372.107023] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [372.107535] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [372.109386] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881474862c0 (0) <7> [372.110353] xe 0000:00:02.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff8881474862c0 (0) <7> [372.114381] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1 <7> [372.114844] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (dp-alt -> disconnected) pin assignment: E max lanes: 4 <7> [372.133590] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <6> [372.208500] [IGT] xe_configfs: finished subtest engines-allowed, SUCCESS <6> [372.208693] [IGT] xe_configfs: exiting, ret=0 <6> [372.209248] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [372.210988] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [372.211003] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [372.211103] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:*) <7> [372.211186] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [372.212197] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [372.212395] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [372.212486] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [372.212570] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [372.212651] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [372.212709] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [372.212768] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [372.212825] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [372.212881] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [372.212963] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [372.213032] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [372.213138] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4 <7> [372.213244] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [372.213330] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes <7> [372.213412] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [372.213495] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [372.213577] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [372.213654] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [372.213727] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [372.213799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [372.213871] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [372.214005] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [372.214095] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [372.214195] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [372.214294] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [372.214379] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [372.214454] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [372.214524] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [372.214594] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [372.214663] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [372.214731] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [372.214799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [372.214867] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [372.214947] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [372.215021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [372.215102] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [372.215183] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [372.215262] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [372.215336] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [372.215405] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [372.215469] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [372.215533] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [372.215602] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [372.216112] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [372.216229] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [372.216334] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [372.216424] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [372.216509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [372.216592] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [372.216675] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [372.216755] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [372.216836] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [372.216944] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [372.217048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [372.217139] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [372.217231] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [372.217318] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [372.217399] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [372.217478] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [372.217557] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [372.217628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [372.217703] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [372.217776] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [372.217848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [372.217975] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [372.218058] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [372.218151] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [372.218243] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [372.218325] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [372.218411] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [372.218502] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [372.218602] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [372.218858] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [372.218987] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [372.219126] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [372.219633] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [372.219778] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [372.219888] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [372.219974] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [372.220062] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [372.220173] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [372.220290] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [372.220410] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [372.220521] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [372.220638] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [372.220760] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [372.221278] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [372.221787] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [372.221908] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [372.221985] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec) <7> [372.222055] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec) <7> [372.222122] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec) <7> [372.222187] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec) <7> [372.222249] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec) <7> [372.222309] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec) <7> [372.223174] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [372.223270] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [372.223355] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [372.223440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [372.223520] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [372.223600] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP) <7> [372.223685] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [372.223764] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [372.223854] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [372.223934] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [372.224012] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [372.224090] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [372.224166] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [372.224243] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [372.224324] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [372.224399] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [372.224470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [372.224540] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [372.224610] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [372.224680] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [372.224750] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [372.224852] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [372.224968] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [372.225084] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [372.225202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [372.225319] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [372.225435] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [372.225575] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [372.225777] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [372.226091] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [372.235702] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <6> [372.238043] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28) <7> [372.244489] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [372.245112] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [372.245385] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [372.245695] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT) <7> [372.246135] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A] <7> [372.246483] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [372.246778] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [372.247059] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [372.247475] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [372.247965] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [372.248256] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [372.248504] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [372.248891] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [372.249143] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [372.250258] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0 <7> [372.250491] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [372.250706] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [372.250900] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [372.251091] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [372.251318] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [372.251549] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [372.251955] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [372.253256] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7> [372.253457] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [372.253670] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [372.263645] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [372.263867] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [372.264058] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [372.467027] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84 <7> [372.467521] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID \a\001\010\a\010 HW-rev 7.8 SW-rev 3.203 quirks 0x0000 <7> [372.468102] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 06 83 81 0d 00 <7> [372.469176] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 4 <7> [372.469650] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [372.470104] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] Panel replay selective_update is supported by panel <7> [372.471886] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00 <7> [372.485031] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz <7> [372.485077] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [372.485088] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [372.485099] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7 <7> [372.485119] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0 <7> [372.485455] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [372.485850] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using alternate EDID fixed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [372.486495] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms) <7> [372.487164] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [372.487551] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] AUX Backlight Control Supported! <7> [372.487889] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Using VESA eDP backlight controls <7> [372.488220] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: seamless <7> [372.489307] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=0 <7> [372.489378] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight enable is controlled through PWM <7> [372.489758] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight level is controlled through PWM <7> [372.490123] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [372.490593] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [372.491012] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using AUX VESA interface for backlight control <7> [372.491395] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [372.492093] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [372.492406] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [372.492672] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [372.492922] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [372.493155] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [372.493439] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [372.494187] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [372.494674] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: dp-alt) <7> [372.495032] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> dp-alt) pin assignment: E max lanes: 4 <7> [372.495321] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1] <7> [372.496646] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [372.496911] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [372.497123] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2] <7> [372.497876] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [372.498101] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [372.499084] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3] <7> [372.500585] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled <7> [372.500825] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled <7> [372.501039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled <7> [372.501244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [372.501425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [372.501600] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7> [372.501781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7> [372.501957] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7> [372.502132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7> [372.502393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7> [372.502575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7> [372.502756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7> [372.502940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7> [372.503169] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7> [372.503419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7> [372.503621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7> [372.503828] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7> [372.504033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7> [372.504254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7> [372.504488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7> [372.504691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7> [372.504875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: disabled, pipe A <7> [372.505154] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: E max lanes: 4 <7> [372.505359] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [372.505524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A <7> [372.505683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B <7> [372.505840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C <7> [372.506002] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [372.506157] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [372.506350] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A <7> [372.506557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B <7> [372.506743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C <7> [372.506918] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [372.507127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [372.507355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A <7> [372.507557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B <7> [372.507736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C <7> [372.507931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: disabled <7> [372.508094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled <7> [372.508272] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled <7> [372.508425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled <7> [372.508567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [372.508702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [372.508836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7> [372.508965] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7> [372.509095] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7> [372.509276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7> [372.509413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7> [372.509541] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7> [372.509660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7> [372.509778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7> [372.509893] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7> [372.510004] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz <7> [372.510116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7> [372.510250] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7> [372.510364] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7> [372.510478] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7> [372.510592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7> [372.510712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz <7> [372.510844] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [372.510956] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [372.511057] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [372.511152] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [372.511331] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [372.511483] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [372.511682] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [372.511872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state] <7> [372.512012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7> [372.512146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state] <6> [372.518590] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7> [372.520958] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7 <7> [372.521032] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000 <7> [372.521087] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000 <7> [372.521159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7> [372.521215] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc <7> [372.521275] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7> [372.521332] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7> [372.521389] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7> [372.521444] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7> [372.521499] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7> [372.521552] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7> [372.521604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7> [372.521658] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7> [372.521710] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7> [372.521763] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [372.521859] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [372.523103] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1650MHz (req 2000MHz), status = 0x00000072 [0x39/00] <7> [372.528112] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 2000MHz (req 2000MHz), status = 0x00000086 [0x43/00] <7> [372.528267] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 2000MHz (req 2000MHz), status = 0x80000534 [0x1A/05] <7> [372.531139] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 2000MHz (req = 2000MHz), before = 1650MHz, status = 0x8002F034, timeouts = 0 <7> [372.531711] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7> [372.531813] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,000000ff <7> [372.531882] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,000000ff <7> [372.531948] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff <7> [372.532013] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16 <7> [372.532099] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff <6> [373.058975] xe 0000:00:02.0: [drm] GT0: ccs1 fused off <6> [373.058981] xe 0000:00:02.0: [drm] GT0: ccs2 fused off <6> [373.058982] xe 0000:00:02.0: [drm] GT0: ccs3 fused off <7> [373.059245] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine <7> [373.059361] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7> [373.059461] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7> [373.059547] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [373.059673] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine <7> [373.059794] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine <7> [373.059931] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine <7> [373.060013] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7> [373.060105] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7> [373.060193] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [373.061433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs <7> [373.061532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000 <7> [373.061628] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000 <7> [373.061706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440 <7> [373.061775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000 <7> [373.061841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000 <7> [373.061904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f <7> [373.061970] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1 <7> [373.062029] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16 <7> [373.062098] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc <7> [373.062160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [373.062224] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [373.062287] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [373.062350] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [373.062420] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [373.062490] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [373.062551] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [373.062611] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [373.062671] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [373.062732] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [373.062793] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [373.062851] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [373.062906] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [373.062960] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [373.063014] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [373.063074] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs <7> [373.063134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000 <7> [373.063206] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306 <7> [373.063281] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080 <7> [373.063362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc <7> [373.063440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01 <7> [373.063512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c <7> [373.063578] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040 <7> [373.063641] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200 <7> [373.063703] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000 <7> [373.063763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08400840 <7> [373.063821] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002 <7> [373.063884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe530] = 0x00000400 <7> [373.063947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000 <7> [373.064008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000 <7> [373.064170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs <7> [373.064242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000 <7> [373.064330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306 <7> [373.064399] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080 <7> [373.064530] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs <7> [373.064593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000 <7> [373.064655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [373.064714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080 <7> [373.064831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs <7> [373.064885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000 <7> [373.064940] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [373.064993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080 <7> [373.065047] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc <7> [373.065117] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01 <7> [373.065176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c <7> [373.065494] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled <7> [373.065796] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7 <7> [373.065885] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800 <7> [373.065949] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014 <7> [373.066004] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7> [373.066074] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc <7> [373.066135] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7> [373.066201] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7> [373.066252] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7> [373.066301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7> [373.066350] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7> [373.066397] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7> [373.066444] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7> [373.066490] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7> [373.066536] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7> [373.066611] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs <7> [373.066734] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells <7> [373.067120] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd16000 for xe_guc_init_post_hwconfig [xe] <7> [373.069367] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 48 ext-regs. <7> [373.087647] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056) <7> [373.088603] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1900MHz (req 2000MHz), status = 0x00000072 [0x39/00] <7> [373.093162] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1900MHz (req 2000MHz), status = 0x80000534 [0x1A/05] <7> [373.096116] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 2000MHz (req = 2000MHz), before = 1900MHz, status = 0x8002F034, timeouts = 0 <7> [373.096450] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7> [373.097480] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords <7> [373.097575] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400 <7> [373.097629] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040 <7> [373.097681] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020 <7> [373.097736] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240 <7> [373.097790] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000 <7> [373.097841] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420 <7> [373.097908] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000 <7> [373.097967] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [373.099711] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords <7> [373.099776] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [373.099836] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <7> [373.101893] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords <7> [373.102021] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <6> [373.106206] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7> [373.110023] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7 <7> [373.110091] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7> [373.110148] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000 <7> [373.110202] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7> [373.110253] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a <7> [373.110304] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7> [373.110353] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7> [373.110397] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7> [373.110441] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7> [373.110485] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7> [373.110528] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7> [373.110571] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7> [373.110614] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7> [373.110656] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <6> [373.112153] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [373.114603] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [373.115606] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [373.115676] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [373.115763] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [373.117196] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7> [373.117418] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7> [373.136803] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7> [373.137270] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7> [373.137489] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [373.137681] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000 <7> [373.137838] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000 <7> [373.137990] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16 <7> [373.138139] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f <6> [373.138292] xe 0000:00:02.0: [drm] GT1: vcs1 fused off <6> [373.138296] xe 0000:00:02.0: [drm] GT1: vcs2 fused off <6> [373.138299] xe 0000:00:02.0: [drm] GT1: vcs3 fused off <6> [373.138301] xe 0000:00:02.0: [drm] GT1: vcs4 fused off <6> [373.138304] xe 0000:00:02.0: [drm] GT1: vcs5 fused off <6> [373.138307] xe 0000:00:02.0: [drm] GT1: vcs6 fused off <6> [373.138310] xe 0000:00:02.0: [drm] GT1: vcs7 fused off <6> [373.138312] xe 0000:00:02.0: [drm] GT1: vecs1 fused off <6> [373.138315] xe 0000:00:02.0: [drm] GT1: vecs2 fused off <6> [373.138317] xe 0000:00:02.0: [drm] GT1: vecs3 fused off <7> [373.138455] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine <7> [373.138811] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine <7> [373.139132] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine <7> [373.141468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs <7> [373.141698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000 <7> [373.141920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000 <7> [373.142134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440 <7> [373.142340] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000 <7> [373.142550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000 <7> [373.142785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f <7> [373.143006] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020 <7> [373.143208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000 <7> [373.143403] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008 <7> [373.143599] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1 <7> [373.143819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16 <7> [373.144035] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc <7> [373.144221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [373.144401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [373.144578] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [373.144797] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [373.144996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [373.145170] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [373.145343] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [373.145515] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [373.145723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [373.145895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [373.146060] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [373.146216] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [373.146406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [373.146570] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [373.146767] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [373.146921] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs <7> [373.147095] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000 <7> [373.147297] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000 <7> [373.148053] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs <7> [373.148212] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000 <7> [373.148372] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000 <7> [373.149087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs <7> [373.149236] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000 <7> [373.149381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000 <7> [373.150386] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled <7> [373.150556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7 <7> [373.150724] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7> [373.150837] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014 <7> [373.150948] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7> [373.151056] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a <7> [373.151175] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7> [373.151297] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7> [373.151408] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7> [373.151503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7> [373.151617] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7> [373.151728] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7> [373.151839] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7> [373.151941] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7> [373.152028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <7> [373.152157] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs <7> [373.152292] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells <7> [373.154477] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x197e000 for xe_guc_init_post_hwconfig [xe] <7> [373.175398] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056) <7> [373.176445] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7> [373.176824] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7> [373.196879] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7> [373.197341] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7> [373.198714] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords <7> [373.198924] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7> [373.202420] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords <7> [373.202619] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7> [373.206773] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords <7> [373.207097] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7> [373.254034] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC <7> [373.256936] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [373.257734] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines: <7> [373.258478] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [373.265053] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7> [373.265714] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7> [373.266304] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7> [373.266810] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7> [373.267338] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7> [373.267807] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7> [373.268228] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7> [373.268616] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7> [373.269046] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7> [373.269390] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7> [373.269725] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7> [373.270073] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7> [373.270370] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7> [373.270657] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7> [373.270956] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7> [373.271945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [373.272313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [373.272639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [373.272942] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [373.273222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [373.273631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset] <7> [373.273918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset] <7> [373.274167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset] <7> [373.274523] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [373.276160] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7> [373.276422] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B] <7> [373.276607] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C] <7> [373.284678] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs <7> [373.286510] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered <7> [373.286687] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [373.287270] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [373.288938] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event <7> [373.289011] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs <7> [373.289613] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [373.290665] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event <7> [373.290738] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs <7> [373.291433] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [373.292428] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event <7> [373.292486] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs <7> [373.293117] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [373.294575] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event <6> [373.294627] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [373.294635] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [373.311101] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [373.316238] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 <7> [373.318629] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [373.318894] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [373.320562] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [373.323630] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7> [373.323886] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4 <7> [373.324057] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [373.324321] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping <7> [373.324399] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping <7> [373.324468] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping <7> [373.324533] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [373.324854] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [373.329617] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [373.329651] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [373.331116] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03 <7> [373.334210] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00 <7> [373.335860] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000 <7> [373.339090] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [373.339115] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [373.340569] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020 <7> [373.345160] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST <7> [373.358810] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00 <7> [373.360408] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff <6> [373.364139] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0 <7> [373.364900] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed <7> [373.367056] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [373.367090] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [373.367367] xe 0000:00:02.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff88814cae8480 (2) <7> [373.371088] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814cae8480 (1) <7> [373.371110] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000 <7> [373.371257] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000 <7> [373.371352] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000 <7> [373.371474] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [373.371585] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7> [373.371698] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1 <7> [373.372227] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [373.372350] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [373.372455] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7> [373.372580] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [373.372674] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [373.373013] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [373.373308] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7> [373.373383] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7> [373.374908] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00 <7> [373.375268] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [373.375380] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [373.375479] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [373.376239] xe 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88814cae8480 (2) <7> [373.376263] xe 0000:00:02.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table <7> [373.376327] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz <7> [373.376333] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [373.376336] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [373.376338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7 <7> [373.376352] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0 <7> [373.376365] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [373.376395] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7> [373.376495] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [373.376589] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [373.377855] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected <7> [373.378143] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [373.378419] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7> [373.378427] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [373.378430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [373.378433] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7> [373.378437] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7> [373.387659] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC <7> [373.419157] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.462927] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.509168] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.554213] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.555082] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [373.555130] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [373.601586] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.648910] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.648974] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5 <7> [373.649081] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5 <7> [373.649795] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03 <7> [373.696668] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.743418] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.791163] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.804657] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed <7> [373.837632] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.838494] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00 <7> [373.885750] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.932988] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5 <7> [373.933050] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5 <7> [373.933113] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5 <3> [373.933193] xe 0000:00:02.0: [drm] ERROR* Sending link address failed with -5 <7> [373.933301] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814cae8480 (1) <7> [373.933880] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000 <7> [373.936098] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [373.936128] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [373.936979] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020 <7> [373.939374] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST <7> [373.947031] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00 <7> [373.948149] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff <7> [373.949299] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000 <7> [373.949615] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000 <7> [373.949870] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000 <7> [373.950098] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7> [373.950115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7> [373.950125] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7> [373.950404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7> [373.950412] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7> [373.950419] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7> [373.950642] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7> [373.950648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7> [373.950655] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7> [373.950660] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7> [373.950664] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7> [373.950805] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [373.950834] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600 <7> [373.950839] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [373.950855] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0) <7> [373.951002] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [373.951017] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [373.957975] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2560x1600 fb: 0x01d9f000 <6> [373.958570] fbcon: xedrmfb (fb0) is primary device <7> [373.959582] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [373.959705] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [373.959806] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [373.959899] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [373.959983] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [373.960066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [373.960147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [373.960231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [373.960321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [373.960414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [373.960538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [373.960630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2560) <7> [373.960720] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2720) <7> [373.960810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2560) <7> [373.960899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2720) <7> [373.960989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2608) <7> [373.961078] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2640) <7> [373.961158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600) <7> [373.961231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600) <7> [373.961304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1663) <7> [373.961376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1669) <7> [373.961459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1800) <7> [373.961549] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1800) <7> [373.961638] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2560) <7> [373.961726] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2720) <7> [373.961813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2560) <7> [373.961901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2720) <7> [373.961987] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2608) <7> [373.962073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2640) <7> [373.962158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600) <7> [373.962235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600) <7> [373.962310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1663) <7> [373.962384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1669) <7> [373.962474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1800) <7> [373.962557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1800) <7> [373.962637] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [373.962716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [373.962796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [373.962875] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [373.962955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C20 <7> [373.963034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [373.963112] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c20pll_hw_state: <7> [373.963196] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [373.963272] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [373.963347] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[0] = 0x0000 <7> [373.963433] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[1] = 0x0000 <7> [373.963520] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[2] = 0x0000 <7> [373.963607] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[3] = 0x0000 <7> [373.963692] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[4] = 0x0000 <7> [373.963776] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[5] = 0x0000 <7> [373.963856] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[6] = 0x0000 <7> [373.963925] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[7] = 0x0000 <7> [373.964006] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[8] = 0x0000 <7> [373.964088] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[9] = 0x0000 <7> [373.964171] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [373.964258] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7> [373.964341] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 51200, rem: 0, den: 1, <7> [373.964428] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 175, tx_clk_div: 0. <7> [373.964512] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7> [373.964592] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7> [373.964671] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xb4, pll[1] = 0x0, pll[2] = 0x3e, pll[3] = 0x1 <7> [373.964751] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [373.964828] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [373.964894] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xc8, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7> [373.964961] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23 <7> [373.965027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 18) <7> [373.965097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 0, found 675000) <7> [373.965169] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1) <7> [373.965239] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7> [373.965347] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [373.965409] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [373.965507] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [373.965584] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (3942 - 4096), size 0 -> 154 <7> [373.965654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [373.965717] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 <7> [373.965780] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 <7> [373.965841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 <7> [373.965917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4700160 num active planes 1 <7> [373.965995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4936 qgv_peak_bw: 38400 <7> [373.966076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4936 qgv_peak_bw: 38400 <7> [373.966154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4936 qgv_peak_bw: 38400 <7> [373.966227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4936 qgv_peak_bw: 38400 <7> [373.966302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4936 <7> [373.966376] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (587520 kHz) > [CRTC:88:pipe A] min cdclk (0 kHz) <7> [373.966451] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (91800 kHz) > old min cdclk (0 kHz) <7> [373.966543] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing <7> [373.966630] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 612000 kHz, actual 612000 kHz <7> [373.966718] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 3, actual 3 <7> [373.966827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset] <7> [373.966906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [373.966978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 18, dithering: 1 <7> [373.967053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [373.967124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [373.967195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [373.967268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [373.967344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8214124, data_n: 8388608, link_m: 912680, link_n: 524288, tu: 64 <7> [373.967434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [373.967518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [373.967600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [373.967683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: enabled, panel replay: enabled, selective fetch: enabled <7> [373.967766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [373.967849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [373.967928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 6, length 16 <7> [373.968005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [373.968084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [373.968157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [373.968228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [373.968305] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [373.968381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [373.968497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0 <7> [373.968581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1800, vmax: 1800, flipline: 1800, pipeline full: 0, guardband: 200 vsync start: 137, vsync end: 131 <7> [373.968661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1600, vmax vblank: 1600, vmin vtotal: 1800, vmax vtotal: 1800 <7> [373.968742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [373.968820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [373.968896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa <7> [373.968966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x40 0xa <7> [373.969039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa <7> [373.969109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 675000, pipe src: 2560x1600+0+0, pixel rate 1175040 <7> [373.969176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 19, ips linetime: 0 <7> [373.969239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [373.969308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [373.969376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [373.969465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0xa4cb8, dpll_md: 0xb42110, fp0: 0x13e, fp1: 0x1000000 <7> [373.969548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [373.969625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [373.969701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [373.969777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.969852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.969925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.969993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [373.970058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [373.970121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.970184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.970246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.970309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [373.970372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2560x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [373.970460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [373.970540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2560.000000x1600.000000+0.000000+0.000000 dst: 2560x1600+0+0 <7> [373.970621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [373.970700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [373.970778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [373.970855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [373.970922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [373.971142] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1803071 0x2642a372) <7> [373.971460] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 612000 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [373.971754] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no) <7> [373.971855] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1530 <7> [373.971935] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A] <7> [373.972003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1] <7> [373.972065] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A] <7> [373.972126] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B] <7> [373.972187] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C] <7> [373.972246] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2] <7> [373.972303] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A] <7> [373.972360] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B] <7> [373.972438] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C] <7> [373.972506] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3] <7> [373.972570] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A] <7> [373.972633] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B] <7> [373.972696] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C] <7> [373.972758] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [373.972918] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [373.972975] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes) <7> [373.973351] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on <7> [373.973461] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [373.973578] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [373.983405] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [373.983616] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on <7> [373.983857] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [374.049209] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1 <7> [374.191123] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [374.195596] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84 <7> [374.197479] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [374.198276] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7> [374.199405] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [374.200528] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [374.201481] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK <7> [374.201729] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [374.219520] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [374.219776] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 675000, lane count = 4 <7> [374.220427] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [374.220791] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [374.221021] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [374.221325] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 4518 <7> [374.225043] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [374.226854] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7> [374.227191] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <6> [374.231124] Console: switching to colour frame buffer device 160x50 <6> [374.241816] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [374.255076] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [374.255558] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [374.255434] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [374.255622] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [374.255776] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [374.256201] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [374.256558] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [374.256882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [374.257387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7> [374.257231] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [374.257449] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7> [374.257605] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [374.257916] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [374.258263] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [374.258602] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [374.258895] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [374.259281] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [374.259580] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [374.259866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [374.260062] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00 <7> [374.260215] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [374.260549] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [374.260880] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [374.260876] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [374.261237] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [374.261528] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [374.261443] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [374.261802] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [374.261909] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [374.262099] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [374.263632] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz <7> [374.263536] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [374.263665] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [374.263677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [374.263687] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7 <7> [374.263714] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0 <7> [374.263794] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [374.263810] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7> [374.264132] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [374.264143] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [374.264413] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [374.264505] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [374.264854] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [374.265246] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [374.265572] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [374.266281] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [374.266830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [374.270458] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7> [374.270547] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [374.270569] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [374.270593] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7> [374.270616] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7> [374.271825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [374.274203] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [374.276006] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [374.277979] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [374.278070] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [374.278974] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03 <7> [374.282105] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00 <7> [374.283748] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000 <7> [374.285778] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [374.285878] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [374.286856] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020

<6> [371.198230] Console: switching to colour dummy device 80x25

<7> [371.217378] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [371.217933] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [371.222487] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [371.224769] [IGT] xe_configfs: starting subtest engines-allowed

<7> [371.225678] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [371.225859] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [371.226388] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [371.226630] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [371.226770] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [371.240709] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:206] is removed

<7> [371.240904] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 3942) -> ( 0 - 0), size 3942 -> 0

<7> [371.241414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [371.241595] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [371.241755] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [371.241899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [371.242221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [371.242475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [371.242701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [371.242924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [371.243177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [371.243420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [371.246063] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [371.246411] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [371.248253] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [371.252083] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [371.252276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [371.252425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [371.252567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [371.252703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8214124/8388608 link 912680/524288, found tu 0, data 0/0 link 0/0)

<7> [371.252833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [371.252960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [371.253097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2560, found 0)

<7> [371.253216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2720, found 0)

<7> [371.253327] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2560, found 0)

<7> [371.253436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2720, found 0)

<7> [371.253545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2608, found 0)

<7> [371.253650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2640, found 0)

<7> [371.253753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1600, found 0)

<7> [371.253854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1600, found 0)

<7> [371.253954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1663, found 0)

<7> [371.254050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1669, found 0)

<7> [371.254184] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1800, found 0)

<7> [371.254283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1800, found 0)

<7> [371.254382] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2560, found 0)

<7> [371.254479] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2720, found 0)

<7> [371.254579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2560, found 0)

<7> [371.254680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2720, found 0)

<7> [371.254780] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2608, found 0)

<7> [371.254881] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2640, found 0)

<7> [371.254984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1600, found 0)

<7> [371.255109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1600, found 0)

<7> [371.255211] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1663, found 0)

<7> [371.255317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1669, found 0)

<7> [371.255423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1800, found 0)

<7> [371.255529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1800, found 0)

<7> [371.255638] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [371.255746] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [371.255854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [371.255966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [371.256092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 18, found 0)

<7> [371.256204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 1175040, found 0)

<7> [371.256324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 1175040, found 0)

<7> [371.256447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 675000, found 0)

<7> [371.256572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)

<7> [371.256701] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset

<7> [371.257133] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [371.257304] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [371.257491] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (3942 - 4096) -> ( 0 - 0), size 154 -> 0

<7> [371.257664] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing

<7> [371.257834] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [371.258004] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 0, actual 0

<7> [371.258241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [modeset]

<7> [371.258446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [371.258623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [371.258792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [371.258966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [371.259167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [371.259345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [371.260099] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [371.260346] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [371.463916] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0

<7> [371.465053] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [371.468423] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on

<7> [371.468710] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [371.469116] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [371.469483] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short

<7> [371.469510] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off

<7> [371.469789] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [371.470030] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [371.523374] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [371.523697] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long

<7> [371.523978] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [371.529221] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [371.529474] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long

<7> [371.529705] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [371.530303] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [371.530722] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [371.531396] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A]

<7> [371.531442] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]

<7> [371.531662] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]

<7> [371.531676] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]

<7> [371.531858] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]

<7> [371.532043] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]

<7> [371.532220] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]

<7> [371.532443] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]

<7> [371.532630] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]

<7> [371.532851] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]

<7> [371.533042] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]

<7> [371.533216] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]

<7> [371.533413] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]

<7> [371.533575] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]

<7> [371.533734] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]

<7> [371.533891] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]

<7> [371.534209] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)

<7> [371.534450] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [371.534635] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [371.534997] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]

<7> [371.535313] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [371.535574] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [371.536067] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [371.536348] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [371.556614] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [371.556889] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long

<7> [371.557085] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [371.557302] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]

<7> [371.577503] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:205:eDP-1] removing connector from sysfs

<7> [371.582994] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:214:DP-1] removing connector from sysfs

<7> [371.587479] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:226:DP-2] removing connector from sysfs

<7> [371.595349] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:234:DP-3] removing connector from sysfs

<7> [371.618332] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4

<7> [371.618496] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [371.629409] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled

<7> [371.698884] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled

<7> [371.719317] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1

<7> [371.768400] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (261 ms remaining)

<7> [372.036265] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [372.107023] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [372.107535] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [372.109386] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881474862c0 (0)

<7> [372.110353] xe 0000:00:02.0: [drm:drm_dp_delayed_destroy_work [drm_display_helper]] mstb ffff8881474862c0 (0)

<7> [372.114381] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1

<7> [372.114844] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (dp-alt -> disconnected) pin assignment: E max lanes: 4

<7> [372.133590] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<6> [372.208500] [IGT] xe_configfs: finished subtest engines-allowed, SUCCESS

<6> [372.208693] [IGT] xe_configfs: exiting, ret=0

<6> [372.209248] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [372.210988] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [372.211003] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [372.211103] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [372.211186] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [372.212197] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [372.212395] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [372.212486] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [372.212570] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [372.212651] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [372.212709] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [372.212768] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [372.212825] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [372.212881] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [372.212963] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [372.213032] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [372.213138] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4

<7> [372.213244] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [372.213330] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes

<7> [372.213412] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [372.213495] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [372.213577] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [372.213654] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [372.213727] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [372.213799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [372.213871] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [372.214005] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [372.214095] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [372.214195] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [372.214294] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [372.214379] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [372.214454] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [372.214524] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [372.214594] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [372.214663] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [372.214731] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [372.214799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [372.214867] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [372.214947] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [372.215021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [372.215102] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [372.215183] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [372.215262] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [372.215336] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [372.215405] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [372.215469] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [372.215533] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [372.215602] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [372.216112] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [372.216229] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [372.216334] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [372.216424] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [372.216509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [372.216592] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [372.216675] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [372.216755] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [372.216836] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [372.216944] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [372.217048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [372.217139] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [372.217231] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [372.217318] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [372.217399] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [372.217478] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [372.217557] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [372.217628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [372.217703] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [372.217776] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [372.217848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [372.217975] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [372.218058] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [372.218151] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [372.218243] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [372.218325] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [372.218411] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [372.218502] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [372.218602] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [372.218858] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [372.218987] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [372.219126] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [372.219633] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [372.219778] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [372.219888] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [372.219974] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [372.220062] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [372.220173] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [372.220290] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [372.220410] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [372.220521] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [372.220638] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [372.220760] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [372.221278] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [372.221787] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [372.221908] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [372.221985] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)

<7> [372.222055] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec)

<7> [372.222122] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec)

<7> [372.222187] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec)

<7> [372.222249] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec)

<7> [372.222309] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec)

<7> [372.223174] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [372.223270] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [372.223355] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [372.223440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [372.223520] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [372.223600] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)

<7> [372.223685] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [372.223764] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [372.223854] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [372.223934] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [372.224012] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [372.224090] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [372.224166] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [372.224243] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [372.224324] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [372.224399] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [372.224470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [372.224540] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [372.224610] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [372.224680] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [372.224750] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [372.224852] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [372.224968] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [372.225084] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [372.225202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [372.225319] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [372.225435] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [372.225575] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [372.225777] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [372.226091] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [372.235702] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.

<6> [372.238043] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)

<7> [372.244489] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [372.245112] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [372.245385] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [372.245695] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT)

<7> [372.246135] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A]

<7> [372.246483] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [372.246778] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [372.247059] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [372.247475] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [372.247965] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [372.248256] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [372.248504] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [372.248891] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [372.249143] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [372.250258] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0

<7> [372.250491] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [372.250706] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [372.250900] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [372.251091] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [372.251318] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [372.251549] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [372.251955] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [372.253256] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on

<7> [372.253457] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [372.253670] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [372.263645] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [372.263867] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [372.264058] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [372.467027] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84

<7> [372.467521] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID \a\001\010\a\010 HW-rev 7.8 SW-rev 3.203 quirks 0x0000

<7> [372.468102] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 06 83 81 0d 00

<7> [372.469176] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 4

<7> [372.469650] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [372.470104] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] Panel replay selective_update is supported by panel

<7> [372.471886] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00

<7> [372.485031] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz

<7> [372.485077] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [372.485088] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [372.485099] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7

<7> [372.485119] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0

<7> [372.485455] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [372.485850] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using alternate EDID fixed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [372.486495] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms)

<7> [372.487164] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [372.487551] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] AUX Backlight Control Supported!

<7> [372.487889] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Using VESA eDP backlight controls

<7> [372.488220] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: seamless

<7> [372.489307] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=0

<7> [372.489378] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight enable is controlled through PWM

<7> [372.489758] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] AUX VESA backlight level is controlled through PWM

<7> [372.490123] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [372.490593] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [372.491012] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using AUX VESA interface for backlight control

<7> [372.491395] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [372.492093] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [372.492406] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [372.492672] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [372.492922] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [372.493155] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [372.493439] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [372.494187] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [372.494674] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: dp-alt)

<7> [372.495032] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> dp-alt) pin assignment: E max lanes: 4

<7> [372.495321] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1]

<7> [372.496646] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [372.496911] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [372.497123] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2]

<7> [372.497876] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [372.498101] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [372.499084] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3]

<7> [372.500585] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: disabled

<7> [372.500825] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled

<7> [372.501039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled

<7> [372.501244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [372.501425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [372.501600] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A

<7> [372.501781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A

<7> [372.501957] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A

<7> [372.502132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A

<7> [372.502393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B

<7> [372.502575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B

<7> [372.502756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B

<7> [372.502940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B

<7> [372.503169] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B

<7> [372.503419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B

<7> [372.503621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C

<7> [372.503828] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C

<7> [372.504033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C

<7> [372.504254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C

<7> [372.504488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C

<7> [372.504691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C

<7> [372.504875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [372.505154] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: E max lanes: 4

<7> [372.505359] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [372.505524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A

<7> [372.505683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B

<7> [372.505840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C

<7> [372.506002] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [372.506157] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [372.506350] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A

<7> [372.506557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B

<7> [372.506743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C

<7> [372.506918] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [372.507127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [372.507355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A

<7> [372.507557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B

<7> [372.507736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C

<7> [372.507931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: disabled

<7> [372.508094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled

<7> [372.508272] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled

<7> [372.508425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled

<7> [372.508567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [372.508702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [372.508836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz

<7> [372.508965] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz

<7> [372.509095] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz

<7> [372.509276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz

<7> [372.509413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz

<7> [372.509541] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz

<7> [372.509660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz

<7> [372.509778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz

<7> [372.509893] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz

<7> [372.510004] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz

<7> [372.510116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz

<7> [372.510250] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz

<7> [372.510364] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz

<7> [372.510478] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz

<7> [372.510592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz

<7> [372.510712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz

<7> [372.510844] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [372.510956] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [372.511057] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [372.511152] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [372.511331] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [372.511483] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [372.511682] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [372.511872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [setup_hw_state]

<7> [372.512012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]

<7> [372.512146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]

<6> [372.518590] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4

<7> [372.520958] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7

<7> [372.521032] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000

<7> [372.521087] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000

<7> [372.521159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001

<7> [372.521215] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc

<7> [372.521275] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004

<7> [372.521332] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000

<7> [372.521389] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000

<7> [372.521444] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000

<7> [372.521499] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000

<7> [372.521552] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000

<7> [372.521604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000

<7> [372.521658] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000

<7> [372.521710] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000

<7> [372.521763] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [372.521859] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [372.523103] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1650MHz (req 2000MHz), status = 0x00000072 [0x39/00]

<7> [372.528112] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 2000MHz (req 2000MHz), status = 0x00000086 [0x43/00]

<7> [372.528267] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 2000MHz (req 2000MHz), status = 0x80000534 [0x1A/05]

<7> [372.531139] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 2000MHz (req = 2000MHz), before = 1650MHz, status = 0x8002F034, timeouts = 0

<7> [372.531711] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled

<7> [372.531813] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,000000ff

<7> [372.531882] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,000000ff

<7> [372.531948] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff

<7> [372.532013] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16

<7> [372.532099] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff

<6> [373.058975] xe 0000:00:02.0: [drm] GT0: ccs1 fused off

<6> [373.058981] xe 0000:00:02.0: [drm] GT0: ccs2 fused off

<6> [373.058982] xe 0000:00:02.0: [drm] GT0: ccs3 fused off

<7> [373.059245] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine

<7> [373.059361] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access

<7> [373.059461] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [373.059547] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [373.059673] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine

<7> [373.059794] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine

<7> [373.059931] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine

<7> [373.060013] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access

<7> [373.060105] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [373.060193] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [373.061433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs

<7> [373.061532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000

<7> [373.061628] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000

<7> [373.061706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440

<7> [373.061775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000

<7> [373.061841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000

<7> [373.061904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f

<7> [373.061970] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1

<7> [373.062029] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16

<7> [373.062098] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [373.062160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [373.062224] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [373.062287] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [373.062350] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [373.062420] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [373.062490] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [373.062551] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [373.062611] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [373.062671] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [373.062732] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [373.062793] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [373.062851] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [373.062906] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [373.062960] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [373.063014] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [373.063074] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs

<7> [373.063134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000

<7> [373.063206] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306

<7> [373.063281] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080

<7> [373.063362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc

<7> [373.063440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01

<7> [373.063512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c

<7> [373.063578] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040

<7> [373.063641] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200

<7> [373.063703] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000

<7> [373.063763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08400840

<7> [373.063821] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002

<7> [373.063884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe530] = 0x00000400

<7> [373.063947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000

<7> [373.064008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000

<7> [373.064170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs

<7> [373.064242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000

<7> [373.064330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306

<7> [373.064399] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080

<7> [373.064530] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs

<7> [373.064593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000

<7> [373.064655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [373.064714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080

<7> [373.064831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs

<7> [373.064885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000

<7> [373.064940] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [373.064993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080

<7> [373.065047] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc

<7> [373.065117] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01

<7> [373.065176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c

<7> [373.065494] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled

<7> [373.065796] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7

<7> [373.065885] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800

<7> [373.065949] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014

<7> [373.066004] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001

<7> [373.066074] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc

<7> [373.066135] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004

<7> [373.066201] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000

<7> [373.066252] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000

<7> [373.066301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000

<7> [373.066350] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000

<7> [373.066397] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000

<7> [373.066444] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000

<7> [373.066490] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000

<7> [373.066536] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000

<7> [373.066611] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs

<7> [373.066734] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells

<7> [373.067120] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd16000 for xe_guc_init_post_hwconfig [xe]

<7> [373.069367] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 48 ext-regs.

<7> [373.087647] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056)

<7> [373.088603] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1900MHz (req 2000MHz), status = 0x00000072 [0x39/00]

<7> [373.093162] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1900MHz (req 2000MHz), status = 0x80000534 [0x1A/05]

<7> [373.096116] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 2000MHz (req = 2000MHz), before = 1900MHz, status = 0x8002F034, timeouts = 0

<7> [373.096450] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled

<7> [373.097480] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords

<7> [373.097575] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400

<7> [373.097629] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040

<7> [373.097681] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020

<7> [373.097736] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240

<7> [373.097790] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000

<7> [373.097841] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420

<7> [373.097908] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000

<7> [373.097967] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000

<7> [373.099711] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords

<7> [373.099776] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [373.099836] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04

<7> [373.101893] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords

<7> [373.102021] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04

<6> [373.106206] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4

<7> [373.110023] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7

<7> [373.110091] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000

<7> [373.110148] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000

<7> [373.110202] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001

<7> [373.110253] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a

<7> [373.110304] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004

<7> [373.110353] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000

<7> [373.110397] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000

<7> [373.110441] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000

<7> [373.110485] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000

<7> [373.110528] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000

<7> [373.110571] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000

<7> [373.110614] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000

<7> [373.110656] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000

<6> [373.112153] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [373.114603] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [373.115606] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [373.115676] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [373.115763] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [373.117196] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]

<7> [373.117418] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]

<7> [373.136803] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0

<7> [373.137270] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled

<7> [373.137489] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [373.137681] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000

<7> [373.137838] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000

<7> [373.137990] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16

<7> [373.138139] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f

<6> [373.138292] xe 0000:00:02.0: [drm] GT1: vcs1 fused off

<6> [373.138296] xe 0000:00:02.0: [drm] GT1: vcs2 fused off

<6> [373.138299] xe 0000:00:02.0: [drm] GT1: vcs3 fused off

<6> [373.138301] xe 0000:00:02.0: [drm] GT1: vcs4 fused off

<6> [373.138304] xe 0000:00:02.0: [drm] GT1: vcs5 fused off

<6> [373.138307] xe 0000:00:02.0: [drm] GT1: vcs6 fused off

<6> [373.138310] xe 0000:00:02.0: [drm] GT1: vcs7 fused off

<6> [373.138312] xe 0000:00:02.0: [drm] GT1: vecs1 fused off

<6> [373.138315] xe 0000:00:02.0: [drm] GT1: vecs2 fused off

<6> [373.138317] xe 0000:00:02.0: [drm] GT1: vecs3 fused off

<7> [373.138455] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine

<7> [373.138811] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine

<7> [373.139132] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine

<7> [373.141468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs

<7> [373.141698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000

<7> [373.141920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000

<7> [373.142134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440

<7> [373.142340] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000

<7> [373.142550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000

<7> [373.142785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f

<7> [373.143006] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020

<7> [373.143208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000

<7> [373.143403] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008

<7> [373.143599] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1

<7> [373.143819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16

<7> [373.144035] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [373.144221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [373.144401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [373.144578] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [373.144797] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [373.144996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [373.145170] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [373.145343] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [373.145515] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [373.145723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [373.145895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [373.146060] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [373.146216] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [373.146406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [373.146570] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [373.146767] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [373.146921] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs

<7> [373.147095] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000

<7> [373.147297] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000

<7> [373.148053] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs

<7> [373.148212] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000

<7> [373.148372] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000

<7> [373.149087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs

<7> [373.149236] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000

<7> [373.149381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000

<7> [373.150386] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled

<7> [373.150556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7

<7> [373.150724] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000

<7> [373.150837] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014

<7> [373.150948] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001

<7> [373.151056] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a

<7> [373.151175] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004

<7> [373.151297] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000

<7> [373.151408] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000

<7> [373.151503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000

<7> [373.151617] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000

<7> [373.151728] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000

<7> [373.151839] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000

<7> [373.151941] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000

<7> [373.152028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000

<7> [373.152157] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs

<7> [373.152292] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells

<7> [373.154477] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x197e000 for xe_guc_init_post_hwconfig [xe]

<7> [373.175398] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056)

<7> [373.176445] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]

<7> [373.176824] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]

<7> [373.196879] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0

<7> [373.197341] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled

<7> [373.198714] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords

<7> [373.198924] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04

<7> [373.202420] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords

<7> [373.202619] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04

<7> [373.206773] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords

<7> [373.207097] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04

<7> [373.254034] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC

<7> [373.256936] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [373.257734] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines:

<7> [373.258478] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [373.265053] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008

<7> [373.265714] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108

<7> [373.266304] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208

<7> [373.266810] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308

<7> [373.267338] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8

<7> [373.267807] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008

<7> [373.268228] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108

<7> [373.268616] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208

<7> [373.269046] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308

<7> [373.269390] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8

<7> [373.269725] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008

<7> [373.270073] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108

<7> [373.270370] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208

<7> [373.270657] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308

<7> [373.270956] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8

<7> [373.271945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [373.272313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [373.272639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [373.272942] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [373.273222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [373.273631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: no [fastset]

<7> [373.273918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset]

<7> [373.274167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset]

<7> [373.274523] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [373.276160] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]

<7> [373.276422] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B]

<7> [373.276607] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C]

<7> [373.284678] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs

<7> [373.286510] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered

<7> [373.286687] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [373.287270] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [373.288938] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event

<7> [373.289011] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs

<7> [373.289613] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [373.290665] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event

<7> [373.290738] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs

<7> [373.291433] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [373.292428] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event

<7> [373.292486] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs

<7> [373.293117] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [373.294575] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event

<6> [373.294627] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [373.294635] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [373.311101] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [373.316238] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10

<7> [373.318629] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [373.318894] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [373.320562] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [373.323630] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]

<7> [373.323886] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4

<7> [373.324057] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [373.324321] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:88:pipe A] not active, skipping

<7> [373.324399] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping

<7> [373.324468] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping

<7> [373.324533] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [373.324854] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [373.329617] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [373.329651] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [373.331116] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03

<7> [373.334210] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00

<7> [373.335860] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000

<7> [373.339090] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [373.339115] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [373.340569] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020

<7> [373.345160] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST

<7> [373.358810] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00

<7> [373.360408] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff

<6> [373.364139] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0

<7> [373.364900] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed

<7> [373.367056] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [373.367090] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [373.367367] xe 0000:00:02.0: [drm:drm_dp_mst_topology_mgr_set_mst [drm_display_helper]] mstb ffff88814cae8480 (2)

<7> [373.371088] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814cae8480 (1)

<7> [373.371110] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000

<7> [373.371257] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000

<7> [373.371352] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000

<7> [373.371474] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [373.371585] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]

<7> [373.371698] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1

<7> [373.372227] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [373.372350] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [373.372455] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]

<7> [373.372580] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [373.372674] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [373.373013] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [373.373308] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]

<7> [373.373383] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]

<7> [373.374908] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00

<7> [373.375268] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [373.375380] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [373.375479] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [373.376239] xe 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88814cae8480 (2)

<7> [373.376263] xe 0000:00:02.0: [drm:drm_dp_mst_link_probe_work [drm_display_helper]] Clearing payload ID table

<7> [373.376327] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz

<7> [373.376333] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [373.376336] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [373.376338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7

<7> [373.376352] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0

<7> [373.376365] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [373.376395] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes

<7> [373.376495] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [373.376589] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [373.377855] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected

<7> [373.378143] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [373.378419] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:

<7> [373.378427] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [373.378430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [373.378433] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]

<7> [373.378437] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]

<7> [373.387659] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC

<7> [373.419157] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.462927] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.509168] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.554213] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.555082] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [373.555130] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [373.601586] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.648910] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.648974] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5

<7> [373.649081] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5

<7> [373.649795] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03

<7> [373.696668] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.743418] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.791163] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.804657] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed

<7> [373.837632] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.838494] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00

<7> [373.885750] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.932988] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -5

<7> [373.933050] xe 0000:00:02.0: [drm:process_single_tx_qlock [drm_display_helper]] failed to dpcd write 5 -5

<7> [373.933113] xe 0000:00:02.0: [drm:process_single_down_tx_qlock [drm_display_helper]] failed to send msg in q -5

<3> [373.933193] xe 0000:00:02.0: [drm] *ERROR* Sending link address failed with -5

<7> [373.933301] xe 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88814cae8480 (1)

<7> [373.933880] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000

<7> [373.936098] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [373.936128] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [373.936979] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020

<7> [373.939374] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST

<7> [373.947031] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00

<7> [373.948149] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff

<7> [373.949299] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000

<7> [373.949615] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000

<7> [373.949870] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000

<7> [373.950098] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected

<7> [373.950115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]

<7> [373.950125] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]

<7> [373.950404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected

<7> [373.950412] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]

<7> [373.950419] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]

<7> [373.950642] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected

<7> [373.950648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes

<7> [373.950655] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no

<7> [373.950660] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no

<7> [373.950664] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no

<7> [373.950805] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [373.950834] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2560x1600

<7> [373.950839] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [373.950855] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2560x1600 set (0,0)

<7> [373.951002] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [373.951017] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [373.957975] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2560x1600 fb: 0x01d9f000

<6> [373.958570] fbcon: xedrmfb (fb0) is primary device

<7> [373.959582] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [373.959705] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [373.959806] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [373.959899] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [373.959983] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [373.960066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [373.960147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [373.960231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [373.960321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [373.960414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [373.960538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [373.960630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2560)

<7> [373.960720] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2720)

<7> [373.960810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2560)

<7> [373.960899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2720)

<7> [373.960989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2608)

<7> [373.961078] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2640)

<7> [373.961158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1600)

<7> [373.961231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1600)

<7> [373.961304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1663)

<7> [373.961376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1669)

<7> [373.961459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1800)

<7> [373.961549] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1800)

<7> [373.961638] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2560)

<7> [373.961726] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2720)

<7> [373.961813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2560)

<7> [373.961901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2720)

<7> [373.961987] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2608)

<7> [373.962073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2640)

<7> [373.962158] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1600)

<7> [373.962235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1600)

<7> [373.962310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1663)

<7> [373.962384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1669)

<7> [373.962474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1800)

<7> [373.962557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1800)

<7> [373.962637] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [373.962716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [373.962796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [373.962875] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [373.962955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C20

<7> [373.963034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [373.963112] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c20pll_hw_state:

<7> [373.963196] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [373.963272] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [373.963347] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[0] = 0x0000

<7> [373.963433] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[1] = 0x0000

<7> [373.963520] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[2] = 0x0000

<7> [373.963607] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[3] = 0x0000

<7> [373.963692] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[4] = 0x0000

<7> [373.963776] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[5] = 0x0000

<7> [373.963856] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[6] = 0x0000

<7> [373.963925] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[7] = 0x0000

<7> [373.964006] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[8] = 0x0000

<7> [373.964088] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] mplla[9] = 0x0000

<7> [373.964171] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [373.964258] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,

<7> [373.964341] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 51200, rem: 0, den: 1,

<7> [373.964428] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 175, tx_clk_div: 0.

<7> [373.964512] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:

<7> [373.964592] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21

<7> [373.964671] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xb4, pll[1] = 0x0, pll[2] = 0x3e, pll[3] = 0x1

<7> [373.964751] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [373.964828] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [373.964894] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xc8, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0

<7> [373.964961] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23

<7> [373.965027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 18)

<7> [373.965097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 0, found 675000)

<7> [373.965169] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)

<7> [373.965239] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset

<7> [373.965347] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [373.965409] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [373.965507] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [373.965584] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (3942 - 4096), size 0 -> 154

<7> [373.965654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [373.965717] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0

<7> [373.965780] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204

<7> [373.965841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210

<7> [373.965917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4700160 num active planes 1

<7> [373.965995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4936 qgv_peak_bw: 38400

<7> [373.966076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4936 qgv_peak_bw: 38400

<7> [373.966154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4936 qgv_peak_bw: 38400

<7> [373.966227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4936 qgv_peak_bw: 38400

<7> [373.966302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4936

<7> [373.966376] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (587520 kHz) > [CRTC:88:pipe A] min cdclk (0 kHz)

<7> [373.966451] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (91800 kHz) > old min cdclk (0 kHz)

<7> [373.966543] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via crawling and squashing

<7> [373.966630] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 612000 kHz, actual 612000 kHz

<7> [373.966718] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 3, actual 3

<7> [373.966827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset]

<7> [373.966906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [373.966978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 18, dithering: 1

<7> [373.967053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [373.967124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [373.967195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [373.967268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [373.967344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8214124, data_n: 8388608, link_m: 912680, link_n: 524288, tu: 64

<7> [373.967434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [373.967518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [373.967600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [373.967683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: enabled, panel replay: enabled, selective fetch: enabled

<7> [373.967766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [373.967849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [373.967928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 6, length 16

<7> [373.968005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [373.968084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [373.968157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [373.968228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [373.968305] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [373.968381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [373.968497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0

<7> [373.968581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1800, vmax: 1800, flipline: 1800, pipeline full: 0, guardband: 200 vsync start: 137, vsync end: 131

<7> [373.968661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1600, vmax vblank: 1600, vmin vtotal: 1800, vmax vtotal: 1800

<7> [373.968742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [373.968820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [373.968896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa

<7> [373.968966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x40 0xa

<7> [373.969039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=1175040, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa

<7> [373.969109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 675000, pipe src: 2560x1600+0+0, pixel rate 1175040

<7> [373.969176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 19, ips linetime: 0

<7> [373.969239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [373.969308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [373.969376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [373.969465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0xa4cb8, dpll_md: 0xb42110, fp0: 0x13e, fp1: 0x1000000

<7> [373.969548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [373.969625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [373.969701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [373.969777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.969852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.969925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.969993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [373.970058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [373.970121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.970184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.970246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.970309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [373.970372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2560x1600 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [373.970460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [373.970540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2560.000000x1600.000000+0.000000+0.000000 dst: 2560x1600+0+0

<7> [373.970621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [373.970700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [373.970778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [373.970855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [373.970922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [373.971142] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1803071 0x2642a372)

<7> [373.971460] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 612000 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3

<7> [373.971754] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)

<7> [373.971855] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1530

<7> [373.971935] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]

<7> [373.972003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]

<7> [373.972065] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]

<7> [373.972126] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]

<7> [373.972187] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]

<7> [373.972246] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]

<7> [373.972303] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]

<7> [373.972360] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]

<7> [373.972438] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]

<7> [373.972506] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]

<7> [373.972570] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]

<7> [373.972633] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]

<7> [373.972696] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]

<7> [373.972758] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [373.972918] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [373.972975] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)

<7> [373.973351] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on

<7> [373.973461] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [373.973578] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [373.983405] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [373.983616] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on

<7> [373.983857] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [374.049209] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1

<7> [374.191123] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [374.195596] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 c1 00 00 01 c0 02 00 02 00 08 09 84

<7> [374.197479] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [374.198276] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07

<7> [374.199405] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [374.200528] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [374.201481] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK

<7> [374.201729] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [374.219520] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [374.219776] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 675000, lane count = 4

<7> [374.220427] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [374.220791] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [374.221021] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [374.221325] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 4518

<7> [374.225043] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [374.226854] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]

<7> [374.227191] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]

<6> [374.231124] Console: switching to colour frame buffer device 160x50

<6> [374.241816] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [374.255076] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [374.255558] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [374.255434] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [374.255622] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [374.255776] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [374.256201] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [374.256558] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [374.256882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [374.257387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]

<7> [374.257231] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [374.257449] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]

<7> [374.257605] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [374.257916] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [374.258263] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [374.258602] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [374.258895] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [374.259281] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [374.259580] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [374.259866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [374.260062] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00

<7> [374.260215] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [374.260549] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [374.260880] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [374.260876] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [374.261237] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [374.261528] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [374.261443] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [374.261802] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [374.261909] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [374.262099] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [374.263632] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz

<7> [374.263536] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [374.263665] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [374.263677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [374.263687] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7

<7> [374.263714] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0

<7> [374.263794] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [374.263810] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes

<7> [374.264132] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [374.264143] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [374.264413] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [374.264505] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [374.264854] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [374.265246] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [374.265572] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [374.266281] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [374.266830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [374.270458] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:

<7> [374.270547] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [374.270569] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [374.270593] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]

<7> [374.270616] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]

<7> [374.271825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [374.274203] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [374.276006] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [374.277979] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [374.278070] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [374.278974] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03

<7> [374.282105] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00

<7> [374.283748] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000

<7> [374.285778] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [374.285878] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [374.286856] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020

Results for igt@xe_configfs@engines-allowed