igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-a on re-lnl-1@xe-3643-99f4b32d88cb9718c944d44ea96cb04f4f70a773 Test details

Detail	Value
Duration	2.19 seconds
Igt-Version	IGT-Version: 2.1-g8a840cd64 (x86_64) (Linux: 6.17.0-rc3-lgci-xe-xe-3643-99f4b32d88cb9718c+ x86_64)
Out	Using IGT_SRANDOM=1756536598 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-downscale-factor-0-75-with-pixel-format Starting dynamic subtest: pipe-A Trying on eDP-1 Dynamic subtest pipe-A: SUCCESS (2.187s)
Err	Starting subtest: plane-downscale-factor-0-75-with-pixel-format Starting dynamic subtest: pipe-A Dynamic subtest pipe-A: SUCCESS (2.187s)
Dmesg Scroll to first warning	<6> [528.123072] Console: switching to colour dummy device 80x25 <6> [528.123330] [IGT] kms_plane_scaling: executing <7> [528.128982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7> [528.128991] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7> [528.129176] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4 <7> [528.129301] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [528.130658] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [528.134042] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [528.134057] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [528.135003] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03 <7> [528.137279] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00 <7> [528.138251] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000 <7> [528.141037] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [528.141049] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [528.142312] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020 <7> [528.144370] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST <7> [528.151638] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00 <7> [528.152448] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff <7> [528.153261] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000 <7> [528.153353] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000 <7> [528.153442] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000 <7> [528.153531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7> [528.153814] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7> [528.153818] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7> [528.153914] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [528.154007] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1 <7> [528.154137] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [528.154215] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7> [528.154437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7> [528.154440] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7> [528.154545] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [528.154625] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7> [528.154889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7> [528.154892] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7> [528.155378] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00 <7> [528.155643] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [528.155745] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [528.155839] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7> [528.155969] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz <7> [528.155977] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [528.155981] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [528.155986] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7 <7> [528.155991] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0 <7> [528.156008] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7> [528.156098] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [528.156183] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [528.156761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7> [528.156765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [528.156769] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [528.156780] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7> [528.156782] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7> [528.156933] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 <7> [528.158222] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [528.161629] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [528.161640] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [528.162374] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03 <7> [528.164621] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00 <7> [528.165438] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000 <7> [528.168054] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81 <7> [528.168065] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81 <7> [528.168810] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020 <7> [528.170960] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST <7> [528.178025] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00 <7> [528.178824] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff <7> [528.179631] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000 <7> [528.179711] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000 <7> [528.179779] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000 <7> [528.179846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7> [528.179854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7> [528.179856] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7> [528.179952] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7> [528.179959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7> [528.179961] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7> [528.180055] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <6> [528.180583] [IGT] kms_plane_scaling: starting subtest plane-downscale-factor-0-75-with-pixel-format <6> [528.180909] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A <7> [528.182112] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.182616] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.182712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.182773] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.182845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.182907] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.182978] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.183060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.183139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.183217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.183291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.183365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.183439] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.183501] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.184095] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.184519] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.184612] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 293760 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.184691] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 660960 available 2700000 <7> [528.184785] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.184864] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.184946] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.185021] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 3942) -> ( 0 - 4054), size 3942 -> 4054 <7> [528.185082] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (3942 - 4096) -> (4054 - 4096), size 154 -> 42 <7> [528.185142] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.185202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.185260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [528.185316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [528.185376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [528.185454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [528.185526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [528.185599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.185687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.185766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [528.185860] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.185920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [fastset] <7> [528.185996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [528.186069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 18, dithering: 1 <7> [528.186141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [528.186212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [528.186283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [528.186353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [528.186423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 2053531, data_n: 8388608, link_m: 228170, link_n: 524288, tu: 64 <7> [528.186490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [528.186557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [528.186628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [528.186697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: enabled, panel replay: enabled, selective fetch: enabled <7> [528.186778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [528.186852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [528.186919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 6, length 16 <7> [528.186985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [528.187051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [528.187116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [528.187181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [528.187246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [528.187311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [528.187376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0 <7> [528.187441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1800, vmax: 1800, flipline: 1800, pipeline full: 0, guardband: 200 vsync start: 137, vsync end: 131 <7> [528.187506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1600, vmax vblank: 1600, vmin vtotal: 1800, vmax vtotal: 1800 <7> [528.187570] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [528.187643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa <7> [528.187710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=293760, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa <7> [528.187787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x40 0xa <7> [528.187856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=293760, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa <7> [528.187924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 675000, pipe src: 2560x1600+0+0, pixel rate 293760 <7> [528.187991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 75, ips linetime: 0 <7> [528.188058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1, scaler_id: -1, scaling_filter: 0 <7> [528.188125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [528.188191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [528.188257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0xa4cb8, dpll_md: 0xb42110, fp0: 0x13e, fp1: 0x1000000 <7> [528.188323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [528.188389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [528.188454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [528.188519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [528.188583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [528.188656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [528.188721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [528.188789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [528.188857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [528.188923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [528.188988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [528.189052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [528.189117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:244] 2560x1600 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [528.189181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [528.189245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2560.000000x1600.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [528.189310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [528.189373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [528.189437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [528.189500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [528.189562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [528.190742] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.190837] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.192841] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7> [528.192933] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <3> [528.193025] xe 0000:00:02.0: [drm] ERROR CPU pipe A FIFO underrun <7> [528.199506] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A <7> [528.199629] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.199648] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.199663] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.199748] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.199819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.199880] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.199938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.199994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.200056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.200136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.200213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.200288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.200363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.200436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.200655] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.200733] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.215779] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.215861] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.215980] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.216083] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.216183] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.216285] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.216386] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.216478] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.216556] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.216651] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.216727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.216794] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.216863] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.216945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.217045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.217132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.217216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.217298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.217378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.217460] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.217527] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.217623] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.218772] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.218829] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.218925] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.218994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.219052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.219104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.219156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.219213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.219286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.219358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.219429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.219500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.219569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.219651] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.230137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.231468] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.231533] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.231573] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.232118] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.232205] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.232287] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.232365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.232439] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.232524] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.232643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.232746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.232844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.232941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.233035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.233233] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.233327] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.251263] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.251369] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.251529] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.251690] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.251828] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.251968] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.252110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.252243] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.252350] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.252439] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.252525] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.252633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.252720] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.252816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.252956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.253084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.253202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.253316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.253428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.253536] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.253640] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.253747] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.254854] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.254911] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.255000] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.255070] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.255134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.255198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.255260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.255330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.255424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.255512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.255609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.255698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.255786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.255874] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.263480] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.264655] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.264685] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.264704] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.264637] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [528.264820] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.264864] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1 <7> [528.264915] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.265005] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.265046] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.265156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.265387] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.265396] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.265628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.265786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.265903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.266091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.266188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.266280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.266373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.266624] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.266735] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.266879] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.266965] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.284990] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.285165] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.285435] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.285704] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.285945] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.286182] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.286429] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.286710] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.286903] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.287079] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.287251] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.287449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [528.287642] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [528.287834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [528.288080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400 <7> [528.288332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400 <7> [528.288624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [528.288865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [528.289090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548 <7> [528.289307] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.289496] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz) <7> [528.289744] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.294017] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.294135] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.294339] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.294526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.294727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.294873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [528.295043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [528.295219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.295441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.295646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.295813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.296011] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.296199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.296394] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.297608] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.298270] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.298465] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.300734] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.300843] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.313484] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.315117] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.315194] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.315244] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.315612] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.315932] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.316137] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.316333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.316509] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.316726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.316951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.317162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.317368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.317615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.317819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.318227] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.318398] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.343534] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.343730] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.344032] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.344297] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.344578] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.344841] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.345112] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.345367] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.345633] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.345818] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.345995] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.346170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.346343] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.346556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.346808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.347057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.347288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.347510] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.347693] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.347755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.347962] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.347975] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.348134] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.348208] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.353656] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.353754] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.353902] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.354026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.354140] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.354231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [528.354319] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [528.354413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [528.354534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [528.354698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [528.354815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.354930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.355042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [528.355147] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.356421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.356528] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.363482] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.364773] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.364804] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.364826] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.364954] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.365060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.365160] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.365309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.365565] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.365780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.366046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.366170] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.366291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.366408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.366522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.366804] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.366912] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.387498] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.387767] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.388079] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.388352] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.388647] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.388906] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.389238] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.389448] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.389924] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.390194] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.390437] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.390738] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.390997] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.391251] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.391447] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.391767] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1496), size 0 -> 1496 <7> [528.391969] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1496 - 3942), size 0 -> 2446 <7> [528.392144] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.392318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.392496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.392718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105 <7> [528.392895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106 <7> [528.393067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.393234] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.393396] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105 <7> [528.393581] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106 <7> [528.393808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 6266880 num active planes 2 <7> [528.394051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 6581 qgv_peak_bw: 38400 <7> [528.394287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 6581 qgv_peak_bw: 38400 <7> [528.394511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 6581 qgv_peak_bw: 38400 <7> [528.394861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 6581 qgv_peak_bw: 38400 <7> [528.395085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 6581 <7> [528.395291] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.395451] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (130560 kHz) > old min cdclk (91800 kHz) <7> [528.395673] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.398573] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.398772] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.398943] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.400691] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.400776] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.400907] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.401053] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [528.401154] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [528.401248] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.401338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.401427] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [528.401541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [528.401639] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.401719] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.401796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [528.401872] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [528.401960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [528.402116] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.402194] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.402282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [528.402348] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [528.402414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.402478] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.402560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [528.402627] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [528.402694] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.402758] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.402822] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [528.402884] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [528.402951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [528.403083] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.403149] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.403225] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [528.403282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [528.403340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.403395] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.403448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [528.403500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [528.403576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.403631] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.403688] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [528.403743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [528.403802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [528.403888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1646 qgv_peak_bw: 38400 <7> [528.403972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1646 qgv_peak_bw: 38400 <7> [528.404055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1646 qgv_peak_bw: 38400 <7> [528.404136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1646 qgv_peak_bw: 38400 <7> [528.404212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1646 <7> [528.404291] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.406009] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.406093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.413474] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.414679] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.414707] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.414729] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.414842] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1399) -> ( 0 - 0), size 1399 -> 0 <7> [528.414934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1399 - 4054) -> ( 0 - 0), size 2655 -> 0 <7> [528.415023] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.415151] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.415361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.415746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.415932] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.416096] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.416227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.416310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.416403] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.416527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.416635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.416736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.416836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.416936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.417168] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.417264] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.440580] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.440767] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.441059] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.441308] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.441568] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.441824] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.442075] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.442266] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.442574] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646 <7> [528.442747] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296 <7> [528.442918] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.443105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.443273] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.443440] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.443714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.443917] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.444074] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.444233] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.444390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.444598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2 <7> [528.444937] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.445189] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.445389] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.445604] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.445803] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.445995] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.446200] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.446431] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.446645] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.446808] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.447008] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.447176] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.447294] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.447437] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646 <7> [528.447561] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296 <7> [528.447540] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.447663] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.447766] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.447736] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.447864] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.447904] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.447979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.448095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.448198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.448301] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.448397] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.448485] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.448606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2 <7> [528.448747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 13161 qgv_peak_bw: 38400 <7> [528.448887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 13161 qgv_peak_bw: 38400 <7> [528.449025] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 13161 qgv_peak_bw: 38400 <7> [528.449152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 13161 qgv_peak_bw: 38400 <7> [528.449276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 13161 <7> [528.449397] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.449490] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (261120 kHz) > old min cdclk (91800 kHz) <7> [528.449670] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.454921] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.454975] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.455051] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A] <7> [528.455136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1437), size 0 -> 1437 <7> [528.455202] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1437 - 4054), size 0 -> 2617 <7> [528.455265] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.455326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.455380] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 <7> [528.455433] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 <7> [528.455486] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.455559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.455616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [528.455671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [528.455734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 3133440 num active planes 2 <7> [528.455819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3291 qgv_peak_bw: 38400 <7> [528.455902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3291 qgv_peak_bw: 38400 <7> [528.455979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3291 qgv_peak_bw: 38400 <7> [528.456053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3291 qgv_peak_bw: 38400 <7> [528.456127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3291 <7> [528.456201] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.459246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.459332] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.463528] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.464607] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.464633] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.464653] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.464766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1437) -> ( 0 - 0), size 1437 -> 0 <7> [528.464854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1437 - 4054) -> ( 0 - 0), size 2617 -> 0 <7> [528.464926] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.464996] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.465094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.465240] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.465383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.465553] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.465705] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.465866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.466024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.466129] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.466209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.466284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.466358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.466431] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.466643] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.466728] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.493053] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.493258] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.493609] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.493889] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.494157] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.494416] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.494698] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.494939] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.495118] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.495290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.495449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.495649] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.495811] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.496012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.496237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.496438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.496650] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.496865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.497060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.497225] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.497368] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.497524] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.497549] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.497749] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.497933] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.505099] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.505158] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.505255] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.505325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.505390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.505451] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.505551] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.505626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.505713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.505797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.505876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.505953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.506030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.506107] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.507989] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.508075] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.513508] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.514658] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.514688] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.514705] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.514796] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.514870] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.514935] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.514993] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.515052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.515261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.515695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.515964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.516116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.516191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.516264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.516428] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.516522] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.543954] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.544134] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.544394] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.544636] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.544851] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.545067] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.545276] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.545489] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.545637] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.545775] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.545908] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.546039] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.546166] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.546307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.546525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.546695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.546851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.547004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.547154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.547297] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.547420] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.547579] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.548492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.548649] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.548785] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.554909] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.554964] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.555057] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.555124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.555184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.555241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.555297] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.555358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.555437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.555542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.555636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.555728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.555814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.555891] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.557783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.557873] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.563489] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.564655] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.564680] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.564697] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.564793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.564872] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.564946] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.565019] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.565127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.565351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.565681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.565943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.566114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.566208] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.566303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.566527] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.566619] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.594391] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.594585] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.594796] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.594978] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.595160] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.595337] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.595537] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.595706] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.595854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.595981] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.596095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.596207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.596315] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.596452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.596597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.596739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.596875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.597008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.597139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.597264] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.597371] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.597521] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.597634] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.597832] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.597968] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.604175] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.604224] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.604311] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.604376] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.604451] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.604521] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.604589] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.604667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.604776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.604859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.604936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.605013] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.605088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.605164] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.607368] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.607462] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.613627] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.614818] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.614844] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.614860] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.614964] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.615040] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.615209] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.615390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.615727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.615929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.616117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.616196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.616274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.616349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.616424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.616640] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.616732] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.647488] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.647773] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.647995] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.651754] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.651877] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.652058] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.652190] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.652310] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.652440] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.652561] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.652674] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.652766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.652844] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.652921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.652997] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [528.653070] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [528.653152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [528.653299] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.653401] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.653508] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.653596] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.653688] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.653783] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.653860] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.653927] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.653998] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.654068] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.654137] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [528.654199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [528.654260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [528.654344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400 <7> [528.654435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400 <7> [528.654526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [528.654617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [528.654706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548 <7> [528.654792] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.654853] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz) <7> [528.654929] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.665809] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.665860] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.665949] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.666014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.666076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.666135] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [528.666193] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [528.666255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.666367] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1 <7> [528.666649] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.666716] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.666781] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.666842] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [528.666896] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [528.666951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.667029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.667105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.667181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.667255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.667329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.667404] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33 <7> [528.671051] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.671147] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.680148] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.681493] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.681547] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed <7> [528.681577] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.681785] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.681959] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.682091] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.682150] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.682207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.682271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.682351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.682487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.682581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.682673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.682762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.682933] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.683010] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.703484] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.703560] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.703659] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.703744] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.703826] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.703910] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.703995] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.704130] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.704221] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.704302] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.704383] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.704476] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.704558] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.704636] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.704708] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.704779] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.704841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.704902] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.704956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.705015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.705092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.705167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.705241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.705314] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.705386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.705479] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.705551] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.706089] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.706144] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.706219] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.706276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.706326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.706374] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [528.706441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [528.706507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [528.706608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [528.706704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [528.706790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.706865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.706935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [528.707007] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.713465] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.714674] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.714698] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.714713] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.714802] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.714871] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.714929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.714986] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.715041] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.715119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.715353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.715708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.715944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.716080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.716155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.716313] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.716383] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.732615] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.732722] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.732887] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.733032] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.733169] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.733308] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.733475] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.733605] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.733718] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.733827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.733925] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.734014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.734098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.734191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.734337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.734479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.734597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.734712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.734826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.734939] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.735033] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.735142] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.736427] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.736488] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.736582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.736656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.736730] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.736804] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.736869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.736940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.737030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.737114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.737197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.737279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.737360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.737458] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.746830] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.747971] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.748004] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.748025] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.748263] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.748560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.748750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.748940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.749110] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.749198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.749317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.749456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.749571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.749667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.749761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.749975] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.750074] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.767807] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.767918] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.768084] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.768228] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.768389] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.768529] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.768674] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.768805] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.768919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.769020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.769109] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.769196] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.769281] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.769392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.769515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.769636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.769753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.769867] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.769980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.770091] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.770181] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.770293] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.771698] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.771750] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.771835] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.771901] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.771964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.772028] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [528.772090] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [528.772157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [528.772242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [528.772324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [528.772428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.772515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [528.772601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [528.772688] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.780141] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.781562] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.781624] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.781659] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.781911] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.782052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.782127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.782201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.782272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.782350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.782470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.782568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.782663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.782754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.782844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.783041] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.783131] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.801492] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.801596] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.801761] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.801901] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.802041] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.802177] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.802320] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.802477] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.802588] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.802698] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.802800] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.802887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [528.802981] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [528.803077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [528.803197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400 <7> [528.803317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400 <7> [528.803448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [528.803563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [528.803673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548 <7> [528.803783] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.803873] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz) <7> [528.803986] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.805975] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.806022] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.806104] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.806165] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.806223] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.806280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [528.806336] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [528.806418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.806506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.806593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.806681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.806767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.806843] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.806916] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.813513] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.815243] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.815342] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.815471] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.815749] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.815927] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.816067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.816148] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.816217] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.816325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.816520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.816666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.816774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.816871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.816967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.817547] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.817688] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.847364] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.847712] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.847987] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.850805] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.851156] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.851462] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.851640] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.851809] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.851966] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.852157] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.852394] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.852505] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.852598] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.852688] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.852777] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.852862] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.852972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [528.853113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [528.853242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [528.853385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.853516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [528.853634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [528.853749] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.853846] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.858814] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.858933] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.859058] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [528.859126] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.859188] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.859249] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [528.859308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [528.859400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [528.859503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [528.859601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [528.859697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.859791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [528.859890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [528.859990] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.861107] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.861218] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.863434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.864554] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.864616] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.864666] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.864804] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [528.864892] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.864972] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.865058] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.865183] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.865663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.865903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.866118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.866233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.866347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.866448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.866781] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.866897] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.888522] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.888886] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.889299] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.889643] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.889946] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.890245] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.890604] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.890987] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.891303] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.891572] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.891818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.892077] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.892358] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.892559] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.892975] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.893230] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.893513] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.893712] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.893920] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.894136] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.894294] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.894508] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1496), size 0 -> 1496 <7> [528.894646] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1496 - 3942), size 0 -> 2446 <7> [528.894771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.894898] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.895027] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.895145] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105 <7> [528.895263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106 <7> [528.895393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.895507] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.895618] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105 <7> [528.895727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106 <7> [528.895869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 6266880 num active planes 2 <7> [528.896061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 6581 qgv_peak_bw: 38400 <7> [528.896233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 6581 qgv_peak_bw: 38400 <7> [528.896441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 6581 qgv_peak_bw: 38400 <7> [528.896605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 6581 qgv_peak_bw: 38400 <7> [528.896757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 6581 <7> [528.896910] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.897031] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (130560 kHz) > old min cdclk (91800 kHz) <7> [528.897188] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.898347] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.898534] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.898680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.901637] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.901739] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.901833] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.901944] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [528.902012] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [528.902073] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.902134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.902194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [528.902254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [528.902365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.902429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.902490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [528.902550] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [528.902623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [528.902768] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.902838] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.902917] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [528.902978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [528.903037] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.903095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.903154] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [528.903212] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [528.903270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.903340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.903402] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [528.903463] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [528.903529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [528.903668] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.903741] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.903822] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [528.903881] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [528.903939] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.903997] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.904056] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [528.904114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [528.904172] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.904230] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.904290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [528.904361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [528.904426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [528.904526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1646 qgv_peak_bw: 38400 <7> [528.904623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1646 qgv_peak_bw: 38400 <7> [528.904727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1646 qgv_peak_bw: 38400 <7> [528.904826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1646 qgv_peak_bw: 38400 <7> [528.904921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1646 <7> [528.905023] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.907038] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.907185] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.913460] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.914992] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.915050] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.915121] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.915387] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 1399) -> ( 0 - 0), size 1399 -> 0 <7> [528.915553] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1399 - 4054) -> ( 0 - 0), size 2655 -> 0 <7> [528.915701] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.915845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.915990] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.916094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.916152] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.916208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.916272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.916354] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.916443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.916555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.916654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.916750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.916847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.916941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.917262] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.917399] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.940733] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.940997] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.941385] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.941650] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.941906] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.942147] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.942415] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.942608] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.942899] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646 <7> [528.943064] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296 <7> [528.943220] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.943391] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.943536] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.943678] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.943834] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.943991] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.944122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.944270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.944429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.944572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2 <7> [528.944845] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.945023] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.945174] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.945367] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.945521] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.945703] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.945886] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.946066] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.946201] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.946348] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.946482] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.946616] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.946718] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.946852] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646 <7> [528.946954] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296 <7> [528.947042] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.947127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.947210] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.947308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.947350] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.947394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.947479] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.947529] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.947573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.947657] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [528.947671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [528.947765] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [528.947849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2 <7> [528.947974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 13161 qgv_peak_bw: 38400 <7> [528.948087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 13161 qgv_peak_bw: 38400 <7> [528.948196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 13161 qgv_peak_bw: 38400 <7> [528.948325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 13161 qgv_peak_bw: 38400 <7> [528.948428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 13161 <7> [528.948530] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.948612] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (261120 kHz) > old min cdclk (91800 kHz) <7> [528.948712] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.953981] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.954038] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.954121] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A] <7> [528.954206] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1437), size 0 -> 1437 <7> [528.954266] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1437 - 4054), size 0 -> 2617 <7> [528.954349] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.954418] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.954484] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 <7> [528.954548] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 <7> [528.954609] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.954663] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [528.954713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [528.954764] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [528.954826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 3133440 num active planes 2 <7> [528.954918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3291 qgv_peak_bw: 38400 <7> [528.955010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3291 qgv_peak_bw: 38400 <7> [528.955095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3291 qgv_peak_bw: 38400 <7> [528.955169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3291 qgv_peak_bw: 38400 <7> [528.955242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3291 <7> [528.955361] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [528.958153] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [528.958249] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [528.963427] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [528.964684] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [528.964733] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [528.964771] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [528.964943] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 1437) -> ( 0 - 0), size 1437 -> 0 <7> [528.965108] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1437 - 4054) -> ( 0 - 0), size 2617 -> 0 <7> [528.965225] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.965394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.965503] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.965607] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.965708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [528.965808] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.965906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.966004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [528.966072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [528.966155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [528.966237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [528.966338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.966429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [528.966519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [528.966772] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [528.966848] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [528.992253] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [528.992479] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [528.992810] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [528.993069] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [528.993343] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [528.993598] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [528.993859] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [528.994108] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [528.994325] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [528.994493] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [528.994645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [528.994796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [528.994974] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [528.995148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [528.995375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [528.995573] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [528.995760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.995940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [528.996115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [528.996295] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [528.996439] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [528.996606] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [528.997316] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [528.997532] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [528.997717] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.004184] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.004248] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.004396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.004476] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.004550] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.004616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.004679] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.004750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.004845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.004929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.005011] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.005091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.005167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.005242] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [529.007165] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.007258] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.013424] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.014529] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.014589] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [529.014626] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.014823] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.014984] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.015156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.015473] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.015652] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.015849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.016050] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.016151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.016251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.016366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.016459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.016671] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.016765] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.044766] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.044961] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.045318] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.045590] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.045821] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.046038] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.046279] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.046497] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.046648] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.046794] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.046931] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.047069] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.047224] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.047422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.047612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.047781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.047944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.048103] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.048268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.048374] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.048445] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.048584] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.048588] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.048730] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.048759] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.055842] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.055901] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.055997] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.056066] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.056128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.056187] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.056243] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.056334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.056434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.056528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.056613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.056693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.056773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.056853] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [529.058754] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.058847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.063421] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.064755] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.064815] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [529.064853] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.065092] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.065338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.065527] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.065708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.065901] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.066071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.066157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.066253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.066346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.066437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.066525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.066700] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.066781] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.094176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.094417] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.094700] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.094925] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.095147] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.095379] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.095598] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.095802] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.095975] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.096126] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.096274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.096402] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.096539] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.096701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.096874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.097046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.097204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.097275] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.097377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.097466] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.097526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.097630] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.097669] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.097784] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.097926] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.104771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.104826] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.104928] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.104995] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.105057] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.105114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.105171] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.105254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.105353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.105447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.105537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.105616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.105690] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.105765] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [529.107685] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.107776] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.113428] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.114614] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.114648] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [529.114670] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.114793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.114892] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.114975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.115106] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.115361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.115576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.115844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.116077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.116157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.116260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.116351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.116550] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.116635] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.147280] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.147543] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.147753] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.151721] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.151858] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.151998] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.152109] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.152240] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.152349] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.152463] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.152570] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.152655] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.152738] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.152819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.152897] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [529.152966] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [529.153046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [529.153203] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.153320] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.153411] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.153501] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.153588] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.153675] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.153753] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.153818] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.153878] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.153934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.153989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [529.154043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [529.154099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [529.154176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400 <7> [529.154273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400 <7> [529.154363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [529.154451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [529.154535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548 <7> [529.154612] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.154674] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz) <7> [529.154752] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.166083] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.166138] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.166264] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.166345] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.166419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.166490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [529.166553] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [529.166616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.166720] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2 <7> [529.166782] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.166836] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.166889] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.166940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [529.166991] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [529.167045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.167121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.167206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.167292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.167384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.167473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.167559] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43 <7> [529.171246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.171363] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.180146] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.181519] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.181571] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed <7> [529.181611] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.181836] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.182020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.182116] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.182173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.182252] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.182330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.182425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.182517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.182599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.182677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.182751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.182915] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.182991] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.203661] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.203797] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.203963] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.204105] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.204268] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.204413] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.204561] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.204706] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.204833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.204957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.205060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.205164] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.205311] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.205428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.205684] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.205844] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.205986] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.206132] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.206302] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.206459] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.206586] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.206713] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.206841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.206955] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.207062] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.207178] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.207353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.207551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.207718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.207881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.208040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.208216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.208380] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.208543] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.210305] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.210425] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.210581] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.210696] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.210805] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.210913] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [529.211022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [529.211142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [529.211353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [529.211519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [529.211668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.211813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.211974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [529.212140] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.230148] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.231742] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.231803] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.231841] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.232100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.232444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.232668] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.232891] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.233097] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.233213] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.233344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.233500] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.233595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.233735] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.233830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.233997] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [529.233996] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [529.234056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.234033] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (dp-alt -> disconnected) pin assignment: E max lanes: 4 <7> [529.234286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.234492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.234940] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.235158] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.235559] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.235730] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.249789] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.249987] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.250312] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.250571] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.250822] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.251072] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.251363] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.251623] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.251806] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.251977] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.252139] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.252339] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.252496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.252663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.252878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.253088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.253308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.253507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.253694] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.253913] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.254072] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.254274] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.256566] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.256657] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.256791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.256887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.256980] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.257071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.257158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.257352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.257474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.257591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.257705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.257815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.257923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.258033] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.263432] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.264594] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.264627] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.264648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.264775] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.264873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.264959] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.265061] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.265336] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.265536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.265791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.266028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.266134] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.266254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.266356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.266565] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.266665] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.284488] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.284615] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.284812] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.284985] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.285147] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.285345] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.285510] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.285666] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.285798] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.285925] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.286034] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.286133] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.286261] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.286373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.286508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.286642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.286771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.286897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.287022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.287143] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.287262] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.287388] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.289321] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.289383] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.289480] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.289555] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.289621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.289684] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.289746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.289814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.289898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.289982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.290064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.290141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.290242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.290323] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.296815] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.297889] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.297914] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.297930] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.298025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.298319] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.298506] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.298687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.298864] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.299035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.299114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.299216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.299310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.299400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.299485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.299643] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.299712] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.318335] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.318499] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.318774] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.319015] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.319276] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.319515] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.319763] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.320005] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.320261] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.320444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.320621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.320796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [529.320956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [529.321149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [529.321384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400 <7> [529.321614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400 <7> [529.321888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [529.322127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [529.322467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548 <7> [529.322750] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.322944] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz) <7> [529.323204] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.327735] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.327858] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.328070] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.328309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.328465] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.328633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [529.328783] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [529.328937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.329130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.329348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.329531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.329737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.329925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.330103] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.331186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.331620] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.331814] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.334356] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.334480] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.346812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.348086] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.348172] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.348219] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.348512] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.348729] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.348924] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.349087] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.349260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.349420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.349614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.349802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.349986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.350169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.350339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.350698] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.350838] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.375924] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.376167] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.376462] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.376716] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.376963] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.377250] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.377574] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.377828] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.378060] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.378280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.378482] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.378656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.378830] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.379029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.379467] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.379747] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.379982] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.380228] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.380478] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.380710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.380919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.381097] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.381289] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.381445] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.381582] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.381707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.381838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.382031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.382170] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.382293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.382422] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.382472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.382605] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.382636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.382797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.382958] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.383127] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.388187] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.388278] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.388421] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.388510] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.388591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.388669] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [529.388743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [529.388826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [529.388963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.389040] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.389124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.389189] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.389253] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [529.389323] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [529.389396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [529.389488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [529.389576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [529.389662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.389744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.389825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [529.389911] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.391167] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.391281] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.396819] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.397912] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.397942] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.397963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.398159] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.398357] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.398541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.398721] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.398926] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.399119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.399225] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.399328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.399428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.399526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.399620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.399841] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.399944] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.420840] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.421081] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.421505] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.421823] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.422133] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.422422] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.422717] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.422935] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A] <7> [529.423402] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.423674] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.423915] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.424171] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.424421] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.424672] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.424949] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.425247] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.425482] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.425698] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.425922] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.426158] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.426324] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A] <7> [529.426557] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1496), size 0 -> 1496 <7> [529.426719] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1496 - 3942), size 0 -> 2446 <7> [529.426858] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.427000] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.427163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.427304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105 <7> [529.427454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106 <7> [529.427586] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.427708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.427827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105 <7> [529.427945] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106 <7> [529.428081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 6266880 num active planes 2 <7> [529.428284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 6581 qgv_peak_bw: 38400 <7> [529.428460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 6581 qgv_peak_bw: 38400 <7> [529.428622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 6581 qgv_peak_bw: 38400 <7> [529.428801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 6581 qgv_peak_bw: 38400 <7> [529.428958] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 6581 <7> [529.429122] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.429241] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (130560 kHz) > old min cdclk (91800 kHz) <7> [529.429388] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.431170] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.431368] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.431533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.433670] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.433745] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.433855] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A] <7> [529.433971] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399 <7> [529.434060] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655 <7> [529.434187] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.434273] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.434348] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 <7> [529.434416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 <7> [529.434480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.434542] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.434603] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 <7> [529.434666] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 <7> [529.434745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2 <7> [529.434850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1646 qgv_peak_bw: 38400 <7> [529.434948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1646 qgv_peak_bw: 38400 <7> [529.435037] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1646 qgv_peak_bw: 38400 <7> [529.435137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1646 qgv_peak_bw: 38400 <7> [529.435229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1646 <7> [529.435322] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.437065] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.437205] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.446807] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.447946] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.447986] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.448018] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.448282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 1399) -> ( 0 - 0), size 1399 -> 0 <7> [529.448479] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1399 - 4054) -> ( 0 - 0), size 2655 -> 0 <7> [529.448665] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.448843] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.449025] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.449139] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.449235] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.449326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.449414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.449511] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.449628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.449772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.449902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.450029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.450168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.450287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.450561] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.450676] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.474632] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.474862] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.475259] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.475558] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.475855] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.476162] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.476437] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.476638] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A] <7> [529.476943] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646 <7> [529.477144] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296 <7> [529.477310] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.477472] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.477627] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.477774] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.477918] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.478141] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.478286] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.478440] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.478584] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.478728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2 <7> [529.478910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 13161 qgv_peak_bw: 38400 <7> [529.479105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 13161 qgv_peak_bw: 38400 <7> [529.479279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 13161 qgv_peak_bw: 38400 <7> [529.479451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 13161 qgv_peak_bw: 38400 <7> [529.479614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 13161 <7> [529.479778] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.479913] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (261120 kHz) > old min cdclk (91800 kHz) <7> [529.480092] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.481105] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.481278] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.481425] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.485888] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.485950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.486041] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A] <7> [529.486158] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1437), size 0 -> 1437 <7> [529.486232] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1437 - 4054), size 0 -> 2617 <7> [529.486302] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.486370] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.486432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 <7> [529.486496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 <7> [529.486561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.486624] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.486686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [529.486747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [529.486814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 3133440 num active planes 2 <7> [529.486901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3291 qgv_peak_bw: 38400 <7> [529.486990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3291 qgv_peak_bw: 38400 <7> [529.487088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3291 qgv_peak_bw: 38400 <7> [529.487178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3291 qgv_peak_bw: 38400 <7> [529.487268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3291 <7> [529.487359] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.490612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.490705] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.496812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.497809] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.497835] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.497858] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.497948] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 1437) -> ( 0 - 0), size 1437 -> 0 <7> [529.498136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1437 - 4054) -> ( 0 - 0), size 2617 -> 0 <7> [529.498326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.498551] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.498761] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.498938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.499075] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.499137] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.499201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.499267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.499340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.499425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.499503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.499579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.499652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.499724] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.499888] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.499956] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.527782] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.527977] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.528345] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.528617] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.528887] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.529166] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.529434] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.529671] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.529842] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.530008] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.530197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.530359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.530544] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.530735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.530977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.531094] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.531227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.531343] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.531421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.531552] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.531601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.531771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.531939] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.532090] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.532252] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.540447] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.540502] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.540592] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.540658] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.540718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.540776] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.540830] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.540890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.540968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.541058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.541149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.541242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.541332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.541412] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.543647] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.543738] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.546826] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.547876] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.547902] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.547920] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.548023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.548188] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.548357] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.548516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.548691] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.548873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.549063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.549155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.549248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.549338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.549421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.549579] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.549656] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.576363] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.576561] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.576862] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.577162] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.577406] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.577648] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.577891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.578545] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.578700] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.578850] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.578994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.579161] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.579296] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.579443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.579636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.579810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.579976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.580158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.580342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.580508] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.580636] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.580785] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.581192] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.581389] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.581551] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.587882] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.587937] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.588047] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.588125] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.588199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.588269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.588338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.588415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.588502] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.588589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.588671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.588750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.588823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.588898] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.590779] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.590875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.596818] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.598291] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.598361] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.598399] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.598701] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.598900] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.599032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.599103] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.599171] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.599251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.599347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.599440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.599532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.599622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.599712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.599906] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.599999] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.627411] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.627598] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.627891] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.628195] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.628444] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.628697] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.628994] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.629288] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.629478] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.629636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.629792] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.629947] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.630165] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.630349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.630565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.630756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.630939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.631133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.631305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.631466] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.631603] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.631759] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.632062] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.632270] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.632445] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.639002] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.639078] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.639181] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.639259] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.639328] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.639390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.639450] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.639516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.639607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.639697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.639783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.639860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.639936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.640024] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.641924] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.642280] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.646816] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.647769] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.647793] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.647810] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.647901] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.647992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.648229] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.648413] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.648605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.648805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.649019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.649104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.649187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.649268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.649347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.649519] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.649591] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.681059] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.681283] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.681471] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.685042] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.685145] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.685292] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.685418] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.685538] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.685656] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.685776] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.685934] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.686087] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.686200] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.686299] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.686401] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.686503] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.686590] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.686670] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.686749] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.686826] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.686899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [529.686965] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [529.687061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [529.687215] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.687310] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.687394] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.687474] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.687556] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.687640] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.687709] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.687768] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.687827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.687882] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.687935] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630 <7> [529.687998] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679 <7> [529.688057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1 <7> [529.688146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400 <7> [529.688236] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400 <7> [529.688323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [529.688398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400 <7> [529.688471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548 <7> [529.688543] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.688600] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz) <7> [529.688673] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.699834] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.699886] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4 <7> [529.699975] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.700238] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.700305] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.700365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 <7> [529.700422] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 <7> [529.700484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.700569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.700652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.700732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.700805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.700878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.700952] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53 <7> [529.704550] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.704639] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.713494] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.714465] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.714493] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed <7> [529.714510] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.714601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.714674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.714736] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.714791] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.714845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.714907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.715011] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.715107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.715273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.715436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.715597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.715949] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.716111] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.736905] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.737063] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.737237] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.737391] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.737540] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.737692] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.737848] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.738011] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.738147] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.738282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.738396] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.738508] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.738637] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.738790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.739084] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.739257] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.739412] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.739569] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.739738] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.739912] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.740076] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.740218] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.740338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.740456] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.740573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.740689] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.740814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.741005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.741184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.741362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.741547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.741765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.741958] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.742160] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.743768] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.743915] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.744149] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.744295] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.744434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.744569] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [529.744701] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [529.744844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [529.745060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [529.745252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [529.745464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.745654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.745850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [529.746034] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [529.763510] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.765074] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.765133] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [529.765172] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.765414] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.765615] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.765802] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.766031] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.766241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.766499] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.766810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.767108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.767372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.767631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.767887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.768465] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.768666] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.783125] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.783342] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.783657] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.783926] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.784284] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.784554] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.784856] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.785171] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.785427] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.785626] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.785850] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.786098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.786276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.786474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.786817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.787096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.787389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.787632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.787875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.788116] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.788288] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.788494] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.790887] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.791011] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.791161] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.791270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.791375] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.791479] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.791591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.791719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.791884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.792144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.792288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.792415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.792538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.792662] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [529.796890] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.798167] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.798224] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [529.798259] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.798496] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.798743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.798930] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.799084] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.799158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.799246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.799359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.799463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.799557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.799644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.799730] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.799922] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.800060] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.818004] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.818144] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.818346] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.818500] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.818652] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.818801] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.818969] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.819114] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.819234] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.819351] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.819449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.819541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.819632] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.819735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.819864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.820012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.820137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.820258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.820390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.820520] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.820613] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.820727] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.822022] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.822076] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.822169] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.822239] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.822304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.822369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.822431] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.822501] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.822589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.822676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.822758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.822840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.822921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.823019] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [529.830095] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.831310] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.831383] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [529.831422] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.831674] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.831871] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.832065] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.832141] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.832220] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.832310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.832423] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.832521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.832616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.832706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.832795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.833003] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.833092] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.855650] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.855842] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.856174] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.856439] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.856699] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.856977] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.857259] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.857540] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.857785] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.858001] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.858230] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.858421] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [529.858596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [529.858794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [529.859099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [529.859349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [529.859591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.859830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [529.860097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [529.860360] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.860558] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.863968] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.864208] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.864420] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.866681] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.866780] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.866974] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.867119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.867231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.867338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [529.867441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [529.867551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [529.867690] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [529.867823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [529.867994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.868147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [529.868276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [529.868394] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [529.869670] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.869787] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.880121] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.881412] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.881477] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [529.881516] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.881755] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.882114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.882338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.882588] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.882759] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.883028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.883235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.883429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.883613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.883794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.884030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.884392] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.884551] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.909580] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.909812] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.910375] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.910608] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.910835] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.911105] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.911377] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.911737] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.911886] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.912060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.912197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.912330] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.912477] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.912624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.912881] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.913091] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.913249] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.913408] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.913557] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.913710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.913838] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.913936] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.913990] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.914116] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.914122] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.914215] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.914273] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.914310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.914416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.914516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.914649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.914780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.914914] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.915059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.915205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.915324] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.915415] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.915530] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.922156] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.922214] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.922304] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.922369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.922429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.922487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.922542] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.922604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.922714] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.922779] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.922831] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.922882] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.923005] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.923067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.923132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.923220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.923298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.923377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.923462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.923550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.923639] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [529.925527] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.925617] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.930087] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.931309] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.931363] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [529.931397] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.931621] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.931806] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.932093] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.932208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.932280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.932353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.932449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.932534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.932612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.932689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.932769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.932966] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.933054] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [529.959875] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.960071] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.960362] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.960605] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.960836] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.961103] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.961333] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.961545] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.961734] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.961915] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.962065] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.962207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.962340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.962503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.962766] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.962970] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.963137] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.963299] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.963465] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.963626] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.963817] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [529.964049] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [529.964199] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [529.964334] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [529.964472] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [529.964607] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.964721] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [529.964831] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [529.964903] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [529.964973] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.965084] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [529.965068] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [529.965174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [529.965199] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [529.965270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [529.965376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [529.965522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [529.965642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [529.965763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.965883] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [529.965997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [529.966107] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [529.966196] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [529.966299] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [529.973555] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [529.973608] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [529.973705] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [529.973770] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [529.973831] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [529.973906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [529.973976] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [529.974052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [529.974160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [529.974253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [529.974337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.974418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [529.974492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [529.974568] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [529.976457] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [529.976549] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [529.980088] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [529.981114] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [529.981170] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [529.981210] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [529.981450] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [529.981630] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [529.981786] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.982031] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.982129] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [529.982203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [529.982294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [529.982385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [529.982469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.982550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [529.982624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [529.982791] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [529.982879] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.008984] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.009183] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.009505] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.009780] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.010077] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.010333] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.010593] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [530.010833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.011097] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.011274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.011434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.011590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.011759] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.011959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.012169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [530.012371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [530.012556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.012739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.012976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [530.013166] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.013314] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [530.013478] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.013910] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [530.014129] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [530.014308] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [530.021076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.021140] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8 <7> [530.021243] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.021316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.021383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.021448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.021509] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.021576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.021661] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [530.021743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [530.021823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.021923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.022014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [530.022107] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63 <7> [530.024043] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [530.024151] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [530.030094] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.031682] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.031744] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed <7> [530.031778] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.032044] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.032212] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.032370] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.032522] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.032672] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.032838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.033052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.033151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.033247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.033340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.033429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.033631] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.033726] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.051167] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.051352] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.051601] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.051827] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.052092] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.052320] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.052568] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.052803] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.053050] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.053220] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.053393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.053566] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [530.053737] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [530.053956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [530.054201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [530.054444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [530.054682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [530.055000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [530.055237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [530.055474] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.055675] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.057463] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.057625] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.057870] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.058038] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.058199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.058391] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [530.058570] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [530.058757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [530.059030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [530.059257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [530.059473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [530.059684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [530.059902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [530.060150] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.063488] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.064895] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.064940] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.064966] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.065160] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.065357] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.065543] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.065720] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.065965] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.066121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.066300] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.066468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.066630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.066804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.067024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.067332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.067457] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.083094] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.083264] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.083521] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.083740] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.083989] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.084211] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.084425] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.084627] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.084774] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.084943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.085078] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.085231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.085382] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.085525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.085712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [530.085910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [530.086081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.086243] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.086402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [530.086554] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.086677] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [530.086850] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.088948] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.089015] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.089125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.089207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.089286] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.089361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.089435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.089517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.089621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [530.089723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [530.089865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.089963] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.090057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [530.090150] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.096810] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.098199] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.098256] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.098293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.098548] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.098753] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.098995] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.099182] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.099282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.099389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.099523] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.099638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.099754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.099890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.100006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.100258] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.100384] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.118218] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.118430] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.118683] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.118959] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.119205] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.119452] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.119702] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.119963] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.120167] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.120331] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.120487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.120675] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.120869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.121073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.121467] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.121758] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.121996] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.122249] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.122477] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.122700] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.122934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.123102] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.123263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.123412] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.123563] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.123711] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.124063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.124322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [530.124529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [530.124723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.124936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.125124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [530.125304] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.125441] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [530.125608] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.127880] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.127956] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.128081] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.128179] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.128271] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.128359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.128443] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.128538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.128695] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.128789] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.128912] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.128992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.129072] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.129148] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.129226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.129341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [530.129453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [530.129561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.129666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.129768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [530.129883] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.146820] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.148297] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.148349] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.148382] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.148608] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.148879] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.149076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.149264] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.149463] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.149667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.149933] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.150165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.150382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.150582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.150827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.151242] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.151400] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.173122] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.173319] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.173623] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.173930] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.174181] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.174425] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.174678] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.174973] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.175214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.175399] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.175580] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.175763] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [530.175983] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [530.176185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [530.176549] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.176827] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.177067] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.177312] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.177557] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.177818] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.178163] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.178425] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.178651] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.178895] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.179121] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.179377] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.179560] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.179710] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.179877] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.180016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.180151] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180 <7> [530.180283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184 <7> [530.180415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1 <7> [530.180603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400 <7> [530.180797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400 <7> [530.180975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [530.181149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400 <7> [530.181312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387 <7> [530.181506] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.181655] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.181814] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [530.182013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [530.182183] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [530.186635] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.186714] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.186873] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.186967] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.187052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.187130] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 <7> [530.187205] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 <7> [530.187290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1 <7> [530.187405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400 <7> [530.187517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400 <7> [530.187626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [530.187719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400 <7> [530.187822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097 <7> [530.187916] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.189158] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [530.189252] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [530.196816] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.198583] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.198702] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.198886] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.199211] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.199320] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.199416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.199506] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.199590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.199706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.199881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.200026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.200164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.200302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.200445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.201003] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.201140] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <3> [530.216061] usb usb4-port1: Cannot enable. Maybe the USB cable is bad? <4> [530.216145] usb usb4-port1: config error <7> [530.228631] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.229040] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.229357] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.229571] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.229797] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.229992] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.230211] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.230443] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.230570] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.230684] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.230809] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.230923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.231032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.231163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.231328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [530.231486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [530.231633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.231797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.231787] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [530.231946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [530.231989] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [530.232093] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.232160] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [530.232208] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [530.232350] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.241076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.241198] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.241336] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.241407] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.241469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.241528] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.241587] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.241660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.241782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [530.241895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [530.241993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.242088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.242182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [530.242287] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.244839] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [530.244951] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [530.246744] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.247784] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.247824] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.247861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.247956] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.248020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.248108] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.248198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.248284] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.248387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.248534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.248678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.248836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.248980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.249095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.249398] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.249505] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.279283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.279557] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.279869] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.280032] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.280186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.280327] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.280490] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.280707] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.280768] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [530.280833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.280929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.280922] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [530.281017] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.281056] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [530.281102] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.281180] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.281285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.281416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [530.281535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [530.281653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.281775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.281893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [530.282007] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.282096] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [530.282206] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.290164] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.290280] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.290425] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.290496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.290559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.290622] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.290682] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.290779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.290885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [530.290983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [530.291080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.291175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.291269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [530.291367] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.293700] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [530.293822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [530.296769] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.298129] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.298187] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.298225] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.298375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.298491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.298602] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.298712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.298838] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.299148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.299257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.299354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.299450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.299544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.299640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.299896] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.299986] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [530.329253] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.329521] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [530.329820] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000 <7> [530.329997] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000 <7> [530.330165] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1 <7> [530.330317] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7> [530.330492] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.330684] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942 <7> [530.330813] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154 <7> [530.330916] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.331015] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0 <7> [530.331107] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330 <7> [530.331197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349 <7> [530.331310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1 <7> [530.331454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400 <7> [530.331587] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400 <7> [530.331712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.331741] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [530.331861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400 <7> [530.331885] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [530.331986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774 <7> [530.332009] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [530.332105] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz) <7> [530.332203] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz) <7> [530.332323] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz) <7> [530.341111] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244] <7> [530.341228] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10 <7> [530.341372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054 <7> [530.341444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [530.341508] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 <7> [530.341568] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 <7> [530.341628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 <7> [530.341699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1 <7> [530.341824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400 <7> [530.341929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400 <7> [530.342025] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.342120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400 <7> [530.342213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194 <7> [530.342311] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73 <7> [530.344804] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [530.344913] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [530.346781] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay <7> [530.347792] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl <7> [530.347830] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed <7> [530.347857] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [530.347953] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0 <7> [530.348018] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [530.348110] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.348201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.348291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [530.348399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [530.348554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [530.348705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [530.348877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.349027] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [530.349154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [530.349433] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay <7> [530.349534] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <6> [530.367886] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS

<6> [528.123072] Console: switching to colour dummy device 80x25

<6> [528.123330] [IGT] kms_plane_scaling: executing

<7> [528.128982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]

<7> [528.128991] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]

<7> [528.129176] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: E max lanes: 4

<7> [528.129301] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [528.130658] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [528.134042] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [528.134057] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [528.135003] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03

<7> [528.137279] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00

<7> [528.138251] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000

<7> [528.141037] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [528.141049] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [528.142312] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020

<7> [528.144370] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST

<7> [528.151638] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00

<7> [528.152448] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff

<7> [528.153261] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000

<7> [528.153353] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000

<7> [528.153442] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000

<7> [528.153531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected

<7> [528.153814] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]

<7> [528.153818] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]

<7> [528.153914] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [528.154007] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1

<7> [528.154137] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [528.154215] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected

<7> [528.154437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]

<7> [528.154440] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]

<7> [528.154545] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [528.154625] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected

<7> [528.154889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1]

<7> [528.154892] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]

<7> [528.155378] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 00 76 0a 02 01 80 00 01 06 66 08 00 00 00

<7> [528.155643] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [528.155745] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [528.155839] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000

<7> [528.155969] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 240 Hz

<7> [528.155977] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [528.155981] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [528.155986] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor NE160QDM-NZ7

<7> [528.155991] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 32, SAD count 0

<7> [528.156008] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes

<7> [528.156098] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [528.156183] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [528.156761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes:

<7> [528.156765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 240 1175040 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [528.156769] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [528.156780] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1]

<7> [528.156782] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]

<7> [528.156933] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1

<7> [528.158222] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [528.161629] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [528.161640] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [528.162374] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03

<7> [528.164621] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:214:DP-1][ENCODER:213:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 00 00

<7> [528.165438] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID HBR HW-rev 10.2 SW-rev 2.11 quirks 0x0000

<7> [528.168054] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Base DPCD: 12 14 c4 81 01 01 03 80 02 02 06 00 00 00 81

<7> [528.168065] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 14 1e c4 81 01 00 03 80 02 02 06 00 00 00 81

<7> [528.168810] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP sink: OUI 00-0c-e7 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0020

<7> [528.170960] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:213:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST

<7> [528.178025] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 01 21 03 7f 3b 07 01 00 00 1f 0e 11 08 00 00 00

<7> [528.178824] xe 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [xe]] FEC CAPABILITY: ff

<7> [528.179631] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000

<7> [528.179711] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000, 810000, 1000000

<7> [528.179779] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000, 810000, 1000000

<7> [528.179846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected

<7> [528.179854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2]

<7> [528.179856] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]

<7> [528.179952] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected

<7> [528.179959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3]

<7> [528.179961] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]

<7> [528.180055] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected

<6> [528.180583] [IGT] kms_plane_scaling: starting subtest plane-downscale-factor-0-75-with-pixel-format

<6> [528.180909] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A

<7> [528.182112] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.182616] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.182712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.182773] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.182845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.182907] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.182978] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.183060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.183139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.183217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.183291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.183365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.183439] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.183501] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.184095] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.184519] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.184612] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 293760 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.184691] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 660960 available 2700000

<7> [528.184785] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.184864] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.184946] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.185021] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 3942) -> ( 0 - 4054), size 3942 -> 4054

<7> [528.185082] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (3942 - 4096) -> (4054 - 4096), size 154 -> 42

<7> [528.185142] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.185202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 4, 46, 46, 46, 43, 46, 0, 0, 0, 9, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.185260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 85, 967, 967, 967, 904, 967, 0, 0, 99, 190, 204 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [528.185316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 95,1065,1065,1065, 996,1065, 0, 0, 100, 210, 210 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [528.185376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [528.185454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [528.185526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [528.185599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.185687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.185766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [528.185860] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.185920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [fastset]

<7> [528.185996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [528.186069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 18, dithering: 1

<7> [528.186141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [528.186212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [528.186283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [528.186353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [528.186423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 2053531, data_n: 8388608, link_m: 228170, link_n: 524288, tu: 64

<7> [528.186490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [528.186557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [528.186628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [528.186697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: enabled, panel replay: enabled, selective fetch: enabled

<7> [528.186778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [528.186852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [528.186919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 6, length 16

<7> [528.186985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [528.187051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [528.187116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [528.187181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [528.187246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [528.187311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [528.187376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0

<7> [528.187441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1800, vmax: 1800, flipline: 1800, pipeline full: 0, guardband: 200 vsync start: 137, vsync end: 131

<7> [528.187506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1600, vmax vblank: 1600, vmin vtotal: 1800, vmax vtotal: 1800

<7> [528.187570] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [528.187643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x48 0xa

<7> [528.187710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=293760, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa

<7> [528.187787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2560x1600": 60 293760 2560 2608 2640 2720 1600 1663 1669 1800 0x40 0xa

<7> [528.187856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=293760, hd=2560 hb=2560-2720 hs=2608-2640 ht=2720, vd=1600 vb=1600-1800 vs=1663-1669 vt=1800, flags=0xa

<7> [528.187924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 675000, pipe src: 2560x1600+0+0, pixel rate 293760

<7> [528.187991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 75, ips linetime: 0

<7> [528.188058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1, scaler_id: -1, scaling_filter: 0

<7> [528.188125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [528.188191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [528.188257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0xa4cb8, dpll_md: 0xb42110, fp0: 0x13e, fp1: 0x1000000

<7> [528.188323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [528.188389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [528.188454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [528.188519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [528.188583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [528.188656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [528.188721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [528.188789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [528.188857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [528.188923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [528.188988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [528.189052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [528.189117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:244] 2560x1600 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [528.189181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [528.189245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2560.000000x1600.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [528.189310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [528.189373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [528.189437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [528.189500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [528.189562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [528.190742] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.190837] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.192841] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]

<7> [528.192933] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]

<3> [528.193025] xe 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun

<7> [528.199506] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A

<7> [528.199629] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.199648] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.199663] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.199748] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.199819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.199880] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.199938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.199994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.200056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.200136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.200213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.200288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.200363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.200436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.200655] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.200733] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.215779] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.215861] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.215980] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.216083] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.216183] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.216285] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.216386] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.216478] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.216556] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.216651] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.216727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.216794] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.216863] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.216945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.217045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.217132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.217216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.217298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.217378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.217460] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.217527] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.217623] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.218772] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.218829] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.218925] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.218994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.219052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.219104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.219156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.219213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.219286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.219358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.219429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.219500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.219569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.219651] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.230137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.231468] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.231533] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.231573] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.232118] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.232205] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.232287] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.232365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.232439] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.232524] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.232643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.232746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.232844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.232941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.233035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.233233] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.233327] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.251263] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.251369] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.251529] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.251690] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.251828] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.251968] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.252110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.252243] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.252350] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.252439] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.252525] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.252633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.252720] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.252816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.252956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.253084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.253202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.253316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.253428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.253536] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.253640] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.253747] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.254854] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.254911] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.255000] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.255070] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.255134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.255198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.255260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.255330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.255424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.255512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.255609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.255698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.255786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.255874] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.263480] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.264655] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.264685] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.264704] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.264637] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [528.264820] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.264864] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC1

<7> [528.264915] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.265005] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.265046] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.265156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.265387] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.265396] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.265628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.265786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.265903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.266091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.266188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.266280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.266373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.266624] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.266735] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.266879] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.266965] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.284990] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.285165] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.285435] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.285704] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.285945] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.286182] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.286429] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.286710] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.286903] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.287079] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.287251] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.287449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [528.287642] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [528.287834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [528.288080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400

<7> [528.288332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400

<7> [528.288624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [528.288865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [528.289090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548

<7> [528.289307] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.289496] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz)

<7> [528.289744] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.294017] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.294135] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.294339] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.294526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.294727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.294873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [528.295043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [528.295219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.295441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.295646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.295813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.296011] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.296199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.296394] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.297608] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.298270] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.298465] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.300734] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.300843] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.313484] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.315117] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.315194] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.315244] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.315612] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.315932] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.316137] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.316333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.316509] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.316726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.316951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.317162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.317368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.317615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.317819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.318227] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.318398] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.343534] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.343730] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.344032] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.344297] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.344578] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.344841] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.345112] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.345367] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.345633] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.345818] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.345995] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.346170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.346343] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.346556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.346808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.347057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.347288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.347510] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.347693] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.347755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.347962] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.347975] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.348134] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.348208] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.353656] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.353754] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.353902] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.354026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.354140] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.354231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [528.354319] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [528.354413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [528.354534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [528.354698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [528.354815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.354930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.355042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [528.355147] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.356421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.356528] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.363482] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.364773] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.364804] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.364826] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.364954] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.365060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.365160] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.365309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.365565] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.365780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.366046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.366170] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.366291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.366408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.366522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.366804] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.366912] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.387498] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.387767] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.388079] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.388352] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.388647] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.388906] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.389238] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.389448] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.389924] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.390194] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.390437] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.390738] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.390997] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.391251] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.391447] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.391767] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1496), size 0 -> 1496

<7> [528.391969] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1496 - 3942), size 0 -> 2446

<7> [528.392144] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.392318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.392496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.392718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105

<7> [528.392895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106

<7> [528.393067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.393234] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.393396] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105

<7> [528.393581] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106

<7> [528.393808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 6266880 num active planes 2

<7> [528.394051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 6581 qgv_peak_bw: 38400

<7> [528.394287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 6581 qgv_peak_bw: 38400

<7> [528.394511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 6581 qgv_peak_bw: 38400

<7> [528.394861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 6581 qgv_peak_bw: 38400

<7> [528.395085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 6581

<7> [528.395291] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.395451] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (130560 kHz) > old min cdclk (91800 kHz)

<7> [528.395673] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.398573] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.398772] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.398943] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.400691] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.400776] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.400907] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.401053] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [528.401154] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [528.401248] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.401338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.401427] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [528.401541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [528.401639] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.401719] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.401796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [528.401872] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [528.401960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [528.402116] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.402194] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.402282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [528.402348] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [528.402414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.402478] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.402560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [528.402627] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [528.402694] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.402758] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.402822] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [528.402884] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [528.402951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [528.403083] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.403149] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.403225] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [528.403282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [528.403340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.403395] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.403448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [528.403500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [528.403576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.403631] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.403688] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [528.403743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [528.403802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [528.403888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1646 qgv_peak_bw: 38400

<7> [528.403972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1646 qgv_peak_bw: 38400

<7> [528.404055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1646 qgv_peak_bw: 38400

<7> [528.404136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1646 qgv_peak_bw: 38400

<7> [528.404212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1646

<7> [528.404291] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.406009] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.406093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.413474] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.414679] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.414707] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.414729] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.414842] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1399) -> ( 0 - 0), size 1399 -> 0

<7> [528.414934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1399 - 4054) -> ( 0 - 0), size 2655 -> 0

<7> [528.415023] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.415151] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.415361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.415746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.415932] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.416096] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.416227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.416310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.416403] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.416527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.416635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.416736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.416836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.416936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.417168] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.417264] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.440580] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.440767] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.441059] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.441308] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.441568] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.441824] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.442075] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.442266] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.442574] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646

<7> [528.442747] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296

<7> [528.442918] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.443105] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.443273] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.443440] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.443714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.443917] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.444074] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.444233] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.444390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.444598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2

<7> [528.444937] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.445189] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.445389] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.445604] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.445803] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.445995] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.446200] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.446431] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.446645] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.446808] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.447008] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.447176] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.447294] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.447437] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646

<7> [528.447561] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296

<7> [528.447540] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.447663] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.447766] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.447736] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.447864] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.447904] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.447979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.448095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.448198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.448301] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.448397] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.448485] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.448606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2

<7> [528.448747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 13161 qgv_peak_bw: 38400

<7> [528.448887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 13161 qgv_peak_bw: 38400

<7> [528.449025] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 13161 qgv_peak_bw: 38400

<7> [528.449152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 13161 qgv_peak_bw: 38400

<7> [528.449276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 13161

<7> [528.449397] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.449490] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (261120 kHz) > old min cdclk (91800 kHz)

<7> [528.449670] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.454921] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.454975] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.455051] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:63:plane 4A]

<7> [528.455136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1437), size 0 -> 1437

<7> [528.455202] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1437 - 4054), size 0 -> 2617

<7> [528.455265] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.455326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.455380] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59

<7> [528.455433] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60

<7> [528.455486] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.455559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.455616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [528.455671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [528.455734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 3133440 num active planes 2

<7> [528.455819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3291 qgv_peak_bw: 38400

<7> [528.455902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3291 qgv_peak_bw: 38400

<7> [528.455979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3291 qgv_peak_bw: 38400

<7> [528.456053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3291 qgv_peak_bw: 38400

<7> [528.456127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3291

<7> [528.456201] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.459246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.459332] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.463528] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.464607] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.464633] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.464653] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.464766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1437) -> ( 0 - 0), size 1437 -> 0

<7> [528.464854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1437 - 4054) -> ( 0 - 0), size 2617 -> 0

<7> [528.464926] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.464996] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.465094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.465240] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.465383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.465553] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.465705] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.465866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.466024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.466129] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.466209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.466284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.466358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.466431] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.466643] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.466728] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.493053] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.493258] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.493609] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.493889] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.494157] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.494416] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.494698] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.494939] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.495118] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.495290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.495449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.495649] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.495811] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.496012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.496237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.496438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.496650] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.496865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.497060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.497225] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.497368] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.497524] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.497549] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.497749] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.497933] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.505099] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.505158] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.505255] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.505325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.505390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.505451] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.505551] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.505626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.505713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.505797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.505876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.505953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.506030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.506107] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.507989] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.508075] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.513508] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.514658] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.514688] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.514705] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.514796] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.514870] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.514935] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.514993] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.515052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.515261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.515695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.515964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.516116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.516191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.516264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.516428] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.516522] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.543954] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.544134] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.544394] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.544636] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.544851] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.545067] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.545276] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.545489] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.545637] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.545775] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.545908] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.546039] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.546166] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.546307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.546525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.546695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.546851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.547004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.547154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.547297] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.547420] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.547579] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.548492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.548649] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.548785] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.554909] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.554964] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.555057] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.555124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.555184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.555241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.555297] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.555358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.555437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.555542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.555636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.555728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.555814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.555891] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.557783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.557873] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.563489] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.564655] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.564680] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.564697] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.564793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.564872] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.564946] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.565019] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.565127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.565351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.565681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.565943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.566114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.566208] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.566303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.566527] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.566619] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.594391] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.594585] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.594796] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.594978] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.595160] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.595337] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.595537] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.595706] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.595854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.595981] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.596095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.596207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.596315] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.596452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.596597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.596739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.596875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.597008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.597139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.597264] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.597371] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.597521] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.597634] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.597832] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.597968] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.604175] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.604224] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.604311] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.604376] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.604451] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.604521] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.604589] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.604667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.604776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.604859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.604936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.605013] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.605088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.605164] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.607368] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.607462] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.613627] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.614818] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.614844] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.614860] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.614964] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.615040] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.615209] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.615390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.615727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.615929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.616117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.616196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.616274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.616349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.616424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.616640] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.616732] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.647488] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.647773] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.647995] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.651754] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.651877] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.652058] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.652190] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.652310] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.652440] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.652561] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.652674] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.652766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.652844] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.652921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.652997] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [528.653070] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [528.653152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [528.653299] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.653401] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.653508] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.653596] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.653688] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.653783] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.653860] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.653927] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.653998] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.654068] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.654137] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [528.654199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [528.654260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [528.654344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400

<7> [528.654435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400

<7> [528.654526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [528.654617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [528.654706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548

<7> [528.654792] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:33:plane 1A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.654853] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz)

<7> [528.654929] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.665809] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.665860] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.665949] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.666014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.666076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.666135] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [528.666193] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [528.666255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.666367] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x1

<7> [528.666649] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.666716] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.666781] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.666842] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [528.666896] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [528.666951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.667029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.667105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.667181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.667255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.667329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.667404] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:33

<7> [528.671051] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.671147] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.680148] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.681493] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.681547] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:244] is removed

<7> [528.681577] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.681785] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.681959] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.682091] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.682150] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.682207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.682271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.682351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.682487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.682581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.682673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.682762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.682933] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.683010] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.703484] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.703560] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.703659] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.703744] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.703826] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.703910] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.703995] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.704130] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.704221] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.704302] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.704383] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.704476] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.704558] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.704636] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.704708] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.704779] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.704841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.704902] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.704956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.705015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.705092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.705167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.705241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.705314] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.705386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.705479] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.705551] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.706089] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.706144] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.706219] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.706276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.706326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.706374] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [528.706441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [528.706507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [528.706608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [528.706704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [528.706790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.706865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.706935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [528.707007] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.713465] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.714674] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.714698] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.714713] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.714802] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.714871] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.714929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.714986] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.715041] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.715119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.715353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.715708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.715944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.716080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.716155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.716313] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.716383] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.732615] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.732722] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.732887] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.733032] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.733169] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.733308] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.733475] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.733605] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.733718] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.733827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.733925] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.734014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.734098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.734191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.734337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.734479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.734597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.734712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.734826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.734939] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.735033] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.735142] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.736427] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.736488] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.736582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.736656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.736730] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.736804] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.736869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.736940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.737030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.737114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.737197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.737279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.737360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.737458] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.746830] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.747971] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.748004] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.748025] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.748263] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.748560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.748750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.748940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.749110] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.749198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.749317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.749456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.749571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.749667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.749761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.749975] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.750074] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.767807] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.767918] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.768084] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.768228] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.768389] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.768529] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.768674] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.768805] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.768919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.769020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.769109] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.769196] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.769281] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.769392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.769515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.769636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.769753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.769867] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.769980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.770091] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.770181] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.770293] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.771698] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.771750] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.771835] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.771901] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.771964] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.772028] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [528.772090] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [528.772157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [528.772242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [528.772324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [528.772428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.772515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [528.772601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [528.772688] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.780141] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.781562] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.781624] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.781659] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.781911] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.782052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.782127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.782201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.782272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.782350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.782470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.782568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.782663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.782754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.782844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.783041] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.783131] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.801492] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.801596] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.801761] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.801901] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.802041] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.802177] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.802320] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.802477] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.802588] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.802698] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.802800] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.802887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [528.802981] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [528.803077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [528.803197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400

<7> [528.803317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400

<7> [528.803448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [528.803563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [528.803673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548

<7> [528.803783] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.803873] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz)

<7> [528.803986] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.805975] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.806022] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.806104] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.806165] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.806223] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.806280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [528.806336] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [528.806418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.806506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.806593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.806681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.806767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.806843] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.806916] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.813513] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.815243] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.815342] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.815471] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.815749] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.815927] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.816067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.816148] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.816217] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.816325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.816520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.816666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.816774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.816871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.816967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.817547] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.817688] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.847364] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.847712] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.847987] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.850805] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.851156] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.851462] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.851640] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.851809] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.851966] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.852157] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.852394] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.852505] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.852598] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.852688] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.852777] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.852862] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.852972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [528.853113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [528.853242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [528.853385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.853516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [528.853634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [528.853749] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.853846] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.858814] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.858933] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.859058] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [528.859126] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.859188] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.859249] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [528.859308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [528.859400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [528.859503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [528.859601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [528.859697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.859791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [528.859890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [528.859990] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.861107] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.861218] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.863434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.864554] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.864616] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.864666] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.864804] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [528.864892] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.864972] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.865058] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.865183] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.865663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.865903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.866118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.866233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.866347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.866448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.866781] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.866897] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.888522] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.888886] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.889299] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.889643] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.889946] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.890245] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.890604] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.890987] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.891303] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.891572] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.891818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.892077] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.892358] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.892559] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.892975] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.893230] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.893513] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.893712] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.893920] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.894136] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.894294] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.894508] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1496), size 0 -> 1496

<7> [528.894646] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1496 - 3942), size 0 -> 2446

<7> [528.894771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.894898] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.895027] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.895145] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105

<7> [528.895263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106

<7> [528.895393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.895507] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.895618] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105

<7> [528.895727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106

<7> [528.895869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 6266880 num active planes 2

<7> [528.896061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 6581 qgv_peak_bw: 38400

<7> [528.896233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 6581 qgv_peak_bw: 38400

<7> [528.896441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 6581 qgv_peak_bw: 38400

<7> [528.896605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 6581 qgv_peak_bw: 38400

<7> [528.896757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 6581

<7> [528.896910] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.897031] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (130560 kHz) > old min cdclk (91800 kHz)

<7> [528.897188] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.898347] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.898534] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.898680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.901637] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.901739] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.901833] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.901944] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [528.902012] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [528.902073] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.902134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.902194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [528.902254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [528.902365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.902429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.902490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [528.902550] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [528.902623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [528.902768] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.902838] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.902917] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [528.902978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [528.903037] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.903095] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.903154] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [528.903212] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [528.903270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.903340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.903402] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [528.903463] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [528.903529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [528.903668] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.903741] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.903822] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [528.903881] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [528.903939] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.903997] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.904056] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [528.904114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [528.904172] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.904230] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.904290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [528.904361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [528.904426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [528.904526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1646 qgv_peak_bw: 38400

<7> [528.904623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1646 qgv_peak_bw: 38400

<7> [528.904727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1646 qgv_peak_bw: 38400

<7> [528.904826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1646 qgv_peak_bw: 38400

<7> [528.904921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1646

<7> [528.905023] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.907038] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.907185] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.913460] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.914992] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.915050] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.915121] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.915387] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 1399) -> ( 0 - 0), size 1399 -> 0

<7> [528.915553] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1399 - 4054) -> ( 0 - 0), size 2655 -> 0

<7> [528.915701] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.915845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.915990] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.916094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.916152] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.916208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.916272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.916354] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.916443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.916555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.916654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.916750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.916847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.916941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.917262] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.917399] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.940733] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.940997] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.941385] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.941650] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.941906] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.942147] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.942415] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.942608] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.942899] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646

<7> [528.943064] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296

<7> [528.943220] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.943391] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.943536] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.943678] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.943834] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.943991] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.944122] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.944270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.944429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.944572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2

<7> [528.944845] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.945023] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.945174] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.945367] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.945521] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.945703] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.945886] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.946066] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.946201] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.946348] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.946482] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.946616] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.946718] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.946852] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646

<7> [528.946954] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296

<7> [528.947042] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.947127] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.947210] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.947308] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.947350] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.947394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.947479] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.947529] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.947573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.947657] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [528.947671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [528.947765] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [528.947849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2

<7> [528.947974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 13161 qgv_peak_bw: 38400

<7> [528.948087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 13161 qgv_peak_bw: 38400

<7> [528.948196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 13161 qgv_peak_bw: 38400

<7> [528.948325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 13161 qgv_peak_bw: 38400

<7> [528.948428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 13161

<7> [528.948530] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.948612] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (261120 kHz) > old min cdclk (91800 kHz)

<7> [528.948712] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.953981] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.954038] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.954121] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:43:plane 2A] using Y plane [PLANE:63:plane 4A]

<7> [528.954206] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 1437), size 0 -> 1437

<7> [528.954266] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1437 - 4054), size 0 -> 2617

<7> [528.954349] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.954418] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.954484] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59

<7> [528.954548] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60

<7> [528.954609] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.954663] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [528.954713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [528.954764] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [528.954826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 3133440 num active planes 2

<7> [528.954918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3291 qgv_peak_bw: 38400

<7> [528.955010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3291 qgv_peak_bw: 38400

<7> [528.955095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3291 qgv_peak_bw: 38400

<7> [528.955169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3291 qgv_peak_bw: 38400

<7> [528.955242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3291

<7> [528.955361] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [528.958153] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [528.958249] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [528.963427] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [528.964684] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [528.964733] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [528.964771] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [528.964943] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 1437) -> ( 0 - 0), size 1437 -> 0

<7> [528.965108] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1437 - 4054) -> ( 0 - 0), size 2617 -> 0

<7> [528.965225] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.965394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.965503] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.965607] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.965708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [528.965808] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.965906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.966004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [528.966072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [528.966155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [528.966237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [528.966338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.966429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [528.966519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [528.966772] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [528.966848] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [528.992253] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [528.992479] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [528.992810] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [528.993069] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [528.993343] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [528.993598] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [528.993859] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [528.994108] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [528.994325] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [528.994493] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [528.994645] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [528.994796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [528.994974] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [528.995148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [528.995375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [528.995573] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [528.995760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.995940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [528.996115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [528.996295] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [528.996439] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [528.996606] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [528.997316] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [528.997532] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [528.997717] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.004184] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.004248] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.004396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.004476] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.004550] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.004616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.004679] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.004750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.004845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.004929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.005011] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.005091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.005167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.005242] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [529.007165] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.007258] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.013424] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.014529] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.014589] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [529.014626] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.014823] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.014984] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.015156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.015473] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.015652] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.015849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.016050] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.016151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.016251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.016366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.016459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.016671] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.016765] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.044766] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.044961] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.045318] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.045590] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.045821] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.046038] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.046279] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.046497] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.046648] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.046794] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.046931] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.047069] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.047224] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.047422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.047612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.047781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.047944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.048103] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.048268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.048374] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.048445] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.048584] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.048588] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.048730] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.048759] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.055842] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.055901] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.055997] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.056066] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.056128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.056187] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.056243] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.056334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.056434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.056528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.056613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.056693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.056773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.056853] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [529.058754] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.058847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.063421] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.064755] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.064815] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [529.064853] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.065092] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.065338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.065527] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.065708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.065901] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.066071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.066157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.066253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.066346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.066437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.066525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.066700] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.066781] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.094176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.094417] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.094700] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.094925] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.095147] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.095379] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.095598] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.095802] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.095975] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.096126] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.096274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.096402] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.096539] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.096701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.096874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.097046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.097204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.097275] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.097377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.097466] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.097526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.097630] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.097669] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.097784] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.097926] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.104771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.104826] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.104928] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.104995] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.105057] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.105114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.105171] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.105254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.105353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.105447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.105537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.105616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.105690] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.105765] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [529.107685] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.107776] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.113428] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.114614] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.114648] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [529.114670] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.114793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.114892] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.114975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.115106] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.115361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.115576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.115844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.116077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.116157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.116260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.116351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.116550] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.116635] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.147280] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.147543] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.147753] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.151721] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.151858] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.151998] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.152109] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.152240] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.152349] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.152463] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.152570] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.152655] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.152738] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.152819] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.152897] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [529.152966] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [529.153046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [529.153203] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.153320] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.153411] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.153501] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.153588] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.153675] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.153753] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.153818] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.153878] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.153934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.153989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [529.154043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [529.154099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [529.154176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400

<7> [529.154273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400

<7> [529.154363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [529.154451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [529.154535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548

<7> [529.154612] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:43:plane 2A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.154674] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz)

<7> [529.154752] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.166083] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.166138] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.166264] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.166345] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.166419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.166490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [529.166553] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [529.166616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.166720] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x2

<7> [529.166782] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.166836] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.166889] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.166940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [529.166991] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [529.167045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.167121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.167206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.167292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.167384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.167473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.167559] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:43

<7> [529.171246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.171363] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.180146] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.181519] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.181571] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:43:plane 2A] because [FB:244] is removed

<7> [529.181611] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.181836] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.182020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.182116] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.182173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.182252] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.182330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.182425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.182517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.182599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.182677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.182751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.182915] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.182991] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.203661] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.203797] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.203963] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.204105] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.204268] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.204413] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.204561] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.204706] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.204833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.204957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.205060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.205164] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.205311] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.205428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.205684] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.205844] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.205986] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.206132] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.206302] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.206459] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.206586] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.206713] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.206841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.206955] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.207062] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.207178] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.207353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.207551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.207718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.207881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.208040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.208216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.208380] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.208543] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.210305] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.210425] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.210581] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.210696] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.210805] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.210913] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [529.211022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [529.211142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [529.211353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [529.211519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [529.211668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.211813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.211974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [529.212140] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.230148] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.231742] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.231803] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.231841] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.232100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.232444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.232668] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.232891] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.233097] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.233213] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.233344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.233500] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.233595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.233735] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.233830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.233997] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [529.233996] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [529.234056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.234033] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (dp-alt -> disconnected) pin assignment: E max lanes: 4

<7> [529.234286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.234492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.234940] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.235158] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.235559] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.235730] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.249789] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.249987] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.250312] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.250571] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.250822] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.251072] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.251363] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.251623] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.251806] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.251977] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.252139] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.252339] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.252496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.252663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.252878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.253088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.253308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.253507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.253694] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.253913] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.254072] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.254274] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.256566] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.256657] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.256791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.256887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.256980] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.257071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.257158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.257352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.257474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.257591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.257705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.257815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.257923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.258033] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.263432] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.264594] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.264627] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.264648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.264775] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.264873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.264959] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.265061] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.265336] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.265536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.265791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.266028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.266134] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.266254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.266356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.266565] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.266665] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.284488] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.284615] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.284812] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.284985] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.285147] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.285345] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.285510] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.285666] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.285798] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.285925] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.286034] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.286133] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.286261] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.286373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.286508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.286642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.286771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.286897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.287022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.287143] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.287262] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.287388] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.289321] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.289383] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.289480] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.289555] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.289621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.289684] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.289746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.289814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.289898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.289982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.290064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.290141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.290242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.290323] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.296815] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.297889] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.297914] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.297930] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.298025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.298319] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.298506] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.298687] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.298864] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.299035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.299114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.299216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.299310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.299400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.299485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.299643] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.299712] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.318335] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.318499] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.318774] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.319015] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.319276] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.319515] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.319763] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.320005] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.320261] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.320444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.320621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.320796] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [529.320956] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [529.321149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [529.321384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400

<7> [529.321614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400

<7> [529.321888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [529.322127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [529.322467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548

<7> [529.322750] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.322944] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz)

<7> [529.323204] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.327735] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.327858] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.328070] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.328309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.328465] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.328633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [529.328783] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [529.328937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.329130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.329348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.329531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.329737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.329925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.330103] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.331186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.331620] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.331814] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.334356] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.334480] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.346812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.348086] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.348172] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.348219] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.348512] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.348729] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.348924] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.349087] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.349260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.349420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.349614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.349802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.349986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.350169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.350339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.350698] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.350838] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.375924] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.376167] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.376462] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.376716] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.376963] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.377250] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.377574] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.377828] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.378060] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.378280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.378482] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.378656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.378830] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.379029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.379467] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.379747] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.379982] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.380228] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.380478] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.380710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.380919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.381097] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.381289] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.381445] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.381582] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.381707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.381838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.382031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.382170] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.382293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.382422] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.382472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.382605] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.382636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.382797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.382958] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.383127] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.388187] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.388278] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.388421] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.388510] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.388591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.388669] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [529.388743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [529.388826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [529.388963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.389040] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.389124] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.389189] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.389253] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [529.389323] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [529.389396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [529.389488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [529.389576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [529.389662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.389744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.389825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [529.389911] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.391167] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.391281] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.396819] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.397912] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.397942] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.397963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.398159] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.398357] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.398541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.398721] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.398926] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.399119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.399225] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.399328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.399428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.399526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.399620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.399841] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.399944] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.420840] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.421081] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.421505] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.421823] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.422133] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.422422] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.422717] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.422935] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A]

<7> [529.423402] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.423674] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.423915] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.424171] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.424421] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.424672] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.424949] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.425247] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.425482] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.425698] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.425922] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.426158] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.426324] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A]

<7> [529.426557] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1496), size 0 -> 1496

<7> [529.426719] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1496 - 3942), size 0 -> 2446

<7> [529.426858] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.427000] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.427163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.427304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105

<7> [529.427454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106

<7> [529.427586] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.427708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.427827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 37, 493, 493, 493, 463, 493, 0, 0, 51, 91, 105

<7> [529.427945] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 42, 544, 544, 544, 511, 544, 0, 0, 52, 102, 106

<7> [529.428081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 6266880 num active planes 2

<7> [529.428284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 6581 qgv_peak_bw: 38400

<7> [529.428460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 6581 qgv_peak_bw: 38400

<7> [529.428622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 6581 qgv_peak_bw: 38400

<7> [529.428801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 6581 qgv_peak_bw: 38400

<7> [529.428958] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 6581

<7> [529.429122] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.429241] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (130560 kHz) > old min cdclk (91800 kHz)

<7> [529.429388] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.431170] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.431368] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.431533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.433670] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.433745] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.433855] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A]

<7> [529.433971] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1399), size 0 -> 1399

<7> [529.434060] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1399 - 4054), size 0 -> 2655

<7> [529.434187] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.434273] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.434348] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39

<7> [529.434416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40

<7> [529.434480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.434542] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.434603] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39

<7> [529.434666] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40

<7> [529.434745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1566720 num active planes 2

<7> [529.434850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1646 qgv_peak_bw: 38400

<7> [529.434948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1646 qgv_peak_bw: 38400

<7> [529.435037] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1646 qgv_peak_bw: 38400

<7> [529.435137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1646 qgv_peak_bw: 38400

<7> [529.435229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1646

<7> [529.435322] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.437065] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.437205] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.446807] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.447946] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.447986] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.448018] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.448282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 1399) -> ( 0 - 0), size 1399 -> 0

<7> [529.448479] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1399 - 4054) -> ( 0 - 0), size 2655 -> 0

<7> [529.448665] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.448843] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.449025] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 17, 127, 127, 127, 121, 127, 0, 0, 31, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.449139] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 20, 141, 141, 141, 135, 141, 0, 0, 32, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.449235] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.449326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.449414] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 10, 127, 127, 127, 121, 127, 0, 0, 24, 25, 39 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.449511] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 12, 141, 141, 141, 135, 141, 0, 0, 25, 29, 40 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.449628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.449772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.449902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.450029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.450168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.450287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.450561] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.450676] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.474632] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.474862] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.475259] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.475558] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.475855] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.476162] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.476437] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.476638] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A]

<7> [529.476943] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1646), size 0 -> 1646

<7> [529.477144] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1646 - 3942), size 0 -> 2296

<7> [529.477310] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.477472] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.477627] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.477774] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.477918] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.478141] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.478286] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.478440] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.478584] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.478728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 12533760 num active planes 2

<7> [529.478910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 13161 qgv_peak_bw: 38400

<7> [529.479105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 13161 qgv_peak_bw: 38400

<7> [529.479279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 13161 qgv_peak_bw: 38400

<7> [529.479451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 13161 qgv_peak_bw: 38400

<7> [529.479614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 13161

<7> [529.479778] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.479913] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (261120 kHz) > old min cdclk (91800 kHz)

<7> [529.480092] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.481105] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.481278] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.481425] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.485888] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.485950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.486041] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:53:plane 3A] using Y plane [PLANE:63:plane 4A]

<7> [529.486158] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 1437), size 0 -> 1437

<7> [529.486232] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> (1437 - 4054), size 0 -> 2617

<7> [529.486302] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.486370] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.486432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59

<7> [529.486496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60

<7> [529.486561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.486624] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.486686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [529.486747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [529.486814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 3133440 num active planes 2

<7> [529.486901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3291 qgv_peak_bw: 38400

<7> [529.486990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3291 qgv_peak_bw: 38400

<7> [529.487088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3291 qgv_peak_bw: 38400

<7> [529.487178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3291 qgv_peak_bw: 38400

<7> [529.487268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3291

<7> [529.487359] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.490612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.490705] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.496812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.497809] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.497835] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.497858] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.497948] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 1437) -> ( 0 - 0), size 1437 -> 0

<7> [529.498136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb (1437 - 4054) -> ( 0 - 0), size 2617 -> 0

<7> [529.498326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.498551] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 3, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.498761] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 232, 232, 232, 221, 232, 0, 0, 45, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.498938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 257, 257, 257, 245, 257, 0, 0, 46, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.499075] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.499137] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.499201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.499267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.499340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.499425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.499503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.499579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.499652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.499724] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.499888] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.499956] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.527782] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.527977] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.528345] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.528617] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.528887] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.529166] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.529434] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.529671] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.529842] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.530008] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.530197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.530359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.530544] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.530735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.530977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.531094] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.531227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.531343] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.531421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.531552] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.531601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.531771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.531939] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.532090] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.532252] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.540447] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.540502] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.540592] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.540658] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.540718] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.540776] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.540830] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.540890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.540968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.541058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.541149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.541242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.541332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.541412] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.543647] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.543738] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.546826] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.547876] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.547902] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.547920] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.548023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.548188] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.548357] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.548516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.548691] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.548873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.549063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.549155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.549248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.549338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.549421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.549579] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.549656] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.576363] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.576561] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.576862] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.577162] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.577406] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.577648] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.577891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.578545] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.578700] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.578850] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.578994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.579161] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.579296] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.579443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.579636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.579810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.579976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.580158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.580342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.580508] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.580636] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.580785] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.581192] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.581389] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.581551] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.587882] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.587937] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.588047] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.588125] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.588199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.588269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.588338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.588415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.588502] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.588589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.588671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.588750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.588823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.588898] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.590779] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.590875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.596818] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.598291] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.598361] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.598399] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.598701] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.598900] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.599032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.599103] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.599171] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.599251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.599347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.599440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.599532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.599622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.599712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.599906] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.599999] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.627411] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.627598] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.627891] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.628195] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.628444] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.628697] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.628994] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.629288] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.629478] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.629636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.629792] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.629947] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.630165] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.630349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.630565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.630756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.630939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.631133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.631305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.631466] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.631603] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.631759] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.632062] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.632270] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.632445] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.639002] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.639078] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.639181] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.639259] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.639328] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.639390] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.639450] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.639516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.639607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.639697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.639783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.639860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.639936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.640024] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.641924] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.642280] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.646816] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.647769] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.647793] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.647810] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.647901] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.647992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.648229] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.648413] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.648605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.648805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.649019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.649104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.649187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.649268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.649347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.649519] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.649591] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.681059] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.681283] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.681471] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.685042] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.685145] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.685292] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.685418] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.685538] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.685656] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.685776] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.685934] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.686087] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.686200] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.686299] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.686401] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.686503] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.686590] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.686670] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.686749] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.686826] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.686899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [529.686965] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [529.687061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [529.687215] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.687310] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.687394] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.687474] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.687556] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.687640] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.687709] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.687768] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.687827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.687882] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.687935] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 247,3363,3363,3363,3158,3363, 0, 0, 261, 616, 630

<7> [529.687998] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 273,3701,3701,3701,3475,3701, 0, 0, 273, 679, 679

<7> [529.688057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 16711680 num active planes 1

<7> [529.688146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 17548 qgv_peak_bw: 38400

<7> [529.688236] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 17548 qgv_peak_bw: 38400

<7> [529.688323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [529.688398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 17548 qgv_peak_bw: 38400

<7> [529.688471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 17548

<7> [529.688543] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:53:plane 3A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.688600] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (326400 kHz) > old min cdclk (91800 kHz)

<7> [529.688673] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.699834] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.699886] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x4

<7> [529.699975] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.700238] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.700305] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.700365] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179

<7> [529.700422] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183

<7> [529.700484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.700569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.700652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.700732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.700805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.700878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.700952] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:53

<7> [529.704550] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.704639] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.713494] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.714465] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.714493] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:53:plane 3A] because [FB:244] is removed

<7> [529.714510] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.714601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.714674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.714736] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.714791] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 60, 862, 862, 862, 821, 862, 0, 0, 74, 165, 179 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.714845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 67, 950, 950, 950, 905, 950, 0, 0, 75, 183, 183 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.714907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.715011] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.715107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.715273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.715436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.715597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.715949] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.716111] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.736905] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.737063] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.737237] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.737391] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.737540] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.737692] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.737848] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.738011] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.738147] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.738282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.738396] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.738508] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.738637] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.738790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.739084] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.739257] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.739412] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.739569] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.739738] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.739912] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.740076] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.740218] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.740338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.740456] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.740573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.740689] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.740814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.741005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.741184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.741362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.741547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.741765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.741958] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.742160] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.743768] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.743915] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.744149] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.744295] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.744434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.744569] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [529.744701] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [529.744844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [529.745060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [529.745252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [529.745464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.745654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.745850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [529.746034] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [529.763510] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.765074] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.765133] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [529.765172] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.765414] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.765615] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.765802] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.766031] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.766241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.766499] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.766810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.767108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.767372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.767631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.767887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.768465] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.768666] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.783125] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.783342] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.783657] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.783926] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.784284] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.784554] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.784856] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.785171] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.785427] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.785626] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.785850] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.786098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.786276] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.786474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.786817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.787096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.787389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.787632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.787875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.788116] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.788288] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.788494] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.790887] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.791011] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.791161] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.791270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.791375] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.791479] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.791591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.791719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.791884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.792144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.792288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.792415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.792538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.792662] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [529.796890] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.798167] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.798224] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [529.798259] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.798496] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.798743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.798930] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.799084] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.799158] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.799246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.799359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.799463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.799557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.799644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.799730] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.799922] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.800060] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.818004] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.818144] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.818346] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.818500] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.818652] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.818801] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.818969] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.819114] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.819234] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.819351] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.819449] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.819541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.819632] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.819735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.819864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.820012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.820137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.820258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.820390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.820520] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.820613] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.820727] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.822022] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.822076] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.822169] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.822239] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.822304] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.822369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.822431] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.822501] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.822589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.822676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.822758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.822840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.822921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.823019] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [529.830095] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.831310] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.831383] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [529.831422] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.831674] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.831871] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.832065] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.832141] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.832220] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.832310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.832423] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.832521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.832616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.832706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.832795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.833003] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.833092] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.855650] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.855842] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.856174] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.856439] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.856699] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.856977] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.857259] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.857540] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.857785] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.858001] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.858230] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.858421] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [529.858596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [529.858794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [529.859099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [529.859349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [529.859591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.859830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [529.860097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [529.860360] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.860558] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.863968] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.864208] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.864420] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.866681] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.866780] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.866974] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.867119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.867231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.867338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [529.867441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [529.867551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [529.867690] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [529.867823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [529.867994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.868147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [529.868276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [529.868394] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [529.869670] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.869787] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.880121] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.881412] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.881477] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [529.881516] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.881755] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.882114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.882338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.882588] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.882759] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.883028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.883235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.883429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.883613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.883794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.884030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.884392] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.884551] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.909580] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.909812] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.910375] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.910608] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.910835] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.911105] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.911377] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.911737] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.911886] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.912060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.912197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.912330] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.912477] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.912624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.912881] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.913091] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.913249] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.913408] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.913557] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.913710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.913838] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.913936] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.913990] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.914116] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.914122] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.914215] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.914273] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.914310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.914416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.914516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.914649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.914780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.914914] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.915059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.915205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.915324] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.915415] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.915530] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.922156] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.922214] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.922304] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.922369] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.922429] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.922487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.922542] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.922604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.922714] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.922779] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.922831] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.922882] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.923005] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.923067] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.923132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.923220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.923298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.923377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.923462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.923550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.923639] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [529.925527] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.925617] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.930087] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.931309] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.931363] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [529.931397] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.931621] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.931806] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.932093] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.932208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.932280] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.932353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.932449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.932534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.932612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.932689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.932769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.932966] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.933054] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [529.959875] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.960071] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.960362] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.960605] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.960836] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.961103] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.961333] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.961545] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.961734] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.961915] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.962065] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.962207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.962340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.962503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.962766] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.962970] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.963137] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.963299] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.963465] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.963626] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.963817] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [529.964049] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [529.964199] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [529.964334] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [529.964472] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [529.964607] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.964721] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [529.964831] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [529.964903] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [529.964973] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.965084] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [529.965068] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [529.965174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [529.965199] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [529.965270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [529.965376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [529.965522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [529.965642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [529.965763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.965883] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [529.965997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [529.966107] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [529.966196] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [529.966299] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [529.973555] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [529.973608] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [529.973705] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [529.973770] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [529.973831] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [529.973906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [529.973976] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [529.974052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [529.974160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [529.974253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [529.974337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.974418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [529.974492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [529.974568] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [529.976457] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [529.976549] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [529.980088] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [529.981114] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [529.981170] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [529.981210] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [529.981450] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [529.981630] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [529.981786] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.982031] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.982129] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [529.982203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [529.982294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [529.982385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [529.982469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.982550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [529.982624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [529.982791] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [529.982879] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.008984] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.009183] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.009505] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.009780] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.010077] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.010333] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.010593] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [530.010833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.011097] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.011274] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.011434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.011590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.011759] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.011959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.012169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [530.012371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [530.012556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.012739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.012976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [530.013166] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:63:plane 4A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.013314] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [530.013478] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.013910] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [530.014129] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [530.014308] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [530.021076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.021140] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x8

<7> [530.021243] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.021316] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.021383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.021448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.021509] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.021576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.021661] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [530.021743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [530.021823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.021923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.022014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [530.022107] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:63

<7> [530.024043] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [530.024151] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [530.030094] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.031682] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.031744] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 4A] because [FB:244] is removed

<7> [530.031778] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.032044] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.032212] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.032370] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.032522] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.032672] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.032838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.033052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.033151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.033247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.033340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.033429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.033631] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.033726] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.051167] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.051352] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.051601] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.051827] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.052092] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.052320] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.052568] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.052803] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.053050] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.053220] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.053393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.053566] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [530.053737] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [530.053956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [530.054201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [530.054444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [530.054682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [530.055000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [530.055237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [530.055474] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.055675] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.057463] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.057625] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.057870] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.058038] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.058199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.058391] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [530.058570] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [530.058757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [530.059030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [530.059257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [530.059473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [530.059684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [530.059902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [530.060150] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.063488] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.064895] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.064940] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.064966] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.065160] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.065357] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.065543] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.065720] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.065965] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.066121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.066300] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.066468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.066630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.066804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.067024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.067332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.067457] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.083094] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.083264] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.083521] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.083740] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.083989] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.084211] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.084425] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.084627] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.084774] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.084943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.085078] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.085231] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.085382] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.085525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.085712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [530.085910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [530.086081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.086243] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.086402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [530.086554] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.086677] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [530.086850] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.088948] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.089015] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.089125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.089207] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.089286] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.089361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.089435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.089517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.089621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [530.089723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [530.089865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.089963] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.090057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [530.090150] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.096810] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.098199] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.098256] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.098293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.098548] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.098753] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.098995] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.099182] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.099282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.099389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.099523] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.099638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.099754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.099890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.100006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.100258] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.100384] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.118218] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.118430] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.118683] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.118959] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.119205] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.119452] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.119702] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.119963] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.120167] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.120331] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.120487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.120675] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.120869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.121073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.121467] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.121758] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.121996] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.122249] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.122477] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.122700] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.122934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.123102] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.123263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.123412] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.123563] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.123711] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.124063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.124322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [530.124529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [530.124723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.124936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.125124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [530.125304] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.125441] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [530.125608] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.127880] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.127956] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.128081] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.128179] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.128271] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.128359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.128443] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.128538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.128695] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.128789] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.128912] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.128992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.129072] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.129148] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.129226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.129341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [530.129453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [530.129561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.129666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.129768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [530.129883] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.146820] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.148297] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.148349] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.148382] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.148608] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.148879] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.149076] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.149264] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.149463] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.149667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.149933] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.150165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.150382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.150582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.150827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.151242] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.151400] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.173122] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.173319] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.173623] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.173930] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.174181] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.174425] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.174678] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.174973] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.175214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.175399] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.175580] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.175763] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [530.175983] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [530.176185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [530.176549] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.176827] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.177067] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.177312] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.177557] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.177818] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.178163] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.178425] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.178651] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.178895] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.179121] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.179377] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.179560] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.179710] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.179877] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.180016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.180151] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 67, 903, 903, 903, 848, 903, 0, 0, 81, 166, 180

<7> [530.180283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 75, 995, 995, 995, 934, 995, 0, 0, 82, 184, 184

<7> [530.180415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 4177920 num active planes 1

<7> [530.180603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 4387 qgv_peak_bw: 38400

<7> [530.180797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 4387 qgv_peak_bw: 38400

<7> [530.180975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [530.181149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 4387 qgv_peak_bw: 38400

<7> [530.181312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 4387

<7> [530.181506] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.181655] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.181814] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [530.182013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [530.182183] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [530.186635] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.186714] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.186873] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.186967] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.187052] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.187130] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59

<7> [530.187205] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60

<7> [530.187290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1044480 num active planes 1

<7> [530.187405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1097 qgv_peak_bw: 38400

<7> [530.187517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1097 qgv_peak_bw: 38400

<7> [530.187626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [530.187719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1097 qgv_peak_bw: 38400

<7> [530.187822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1097

<7> [530.187916] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.189158] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [530.189252] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [530.196816] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.198583] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.198702] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.198886] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.199211] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.199320] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.199416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.199506] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 17, 232, 232, 232, 221, 232, 0, 0, 31, 45, 59 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.199590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 20, 257, 257, 257, 245, 257, 0, 0, 32, 51, 60 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.199706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.199881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.200026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.200164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.200302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.200445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.201003] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.201140] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<3> [530.216061] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?

<7> [530.228631] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.229040] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.229357] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.229571] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.229797] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.229992] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.230211] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.230443] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.230570] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.230684] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.230809] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.230923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.231032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.231163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.231328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [530.231486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [530.231633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.231797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.231787] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [530.231946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [530.231989] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [530.232093] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.232160] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [530.232208] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [530.232350] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.241076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.241198] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.241336] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.241407] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.241469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.241528] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.241587] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.241660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.241782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [530.241895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [530.241993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.242088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.242182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [530.242287] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.244839] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [530.244951] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [530.246744] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.247784] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.247824] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.247861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.247956] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.248020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.248108] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.248198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.248284] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.248387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.248534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.248678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.248836] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.248980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.249095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.249398] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.249505] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.279283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.279557] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.279869] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.280032] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.280186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.280327] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.280490] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.280707] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.280768] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [530.280833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.280929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.280922] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [530.281017] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.281056] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [530.281102] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.281180] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.281285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.281416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [530.281535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [530.281653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.281775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.281893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [530.282007] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.282096] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [530.282206] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.290164] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.290280] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.290425] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.290496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.290559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.290622] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.290682] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.290779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.290885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [530.290983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [530.291080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.291175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.291269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [530.291367] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.293700] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [530.293822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [530.296769] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.298129] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.298187] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.298225] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.298375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.298491] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.298602] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.298712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.298838] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.299148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.299257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.299354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.299450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.299544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.299640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.299896] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.299986] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [530.329253] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.329521] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [530.329820] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 1175040 kHz DSC off max lanes 4 max rate 675000 max pipe_bpp 30 max link_bpp 30.0000

<7> [530.329997] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 675000 bpp input 18 compressed 0.0000 link rate required 2643840 available 2700000

<7> [530.330165] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 18, dithering: 1

<7> [530.330317] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]

<7> [530.330492] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.330684] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 3942), size 0 -> 3942

<7> [530.330813] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4054 - 4096) -> (3942 - 4096), size 42 -> 154

<7> [530.330916] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.331015] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 82, 82, 82, 77, 82, 0, 0, 0, 15, 0

<7> [530.331107] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 127,1723,1723,1723,1618,1723, 0, 0, 141, 316, 330

<7> [530.331197] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 141,1897,1897,1897,1781,1897, 0, 0, 142, 349, 349

<7> [530.331310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 8355840 num active planes 1

<7> [530.331454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 8774 qgv_peak_bw: 38400

<7> [530.331587] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 8774 qgv_peak_bw: 38400

<7> [530.331712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.331741] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [530.331861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 8774 qgv_peak_bw: 38400

<7> [530.331885] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [530.331986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 8774

<7> [530.332009] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [530.332105] xe 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [xe]] [PLANE:73:plane 5A] min cdclk (1044480 kHz) > [CRTC:88:pipe A] min cdclk (587520 kHz)

<7> [530.332203] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (163200 kHz) > old min cdclk (91800 kHz)

<7> [530.332323] xe 0000:00:02.0: [drm:intel_compute_min_cdclk [xe]] required cdclk (1044480 kHz) exceeds max (652800 kHz)

<7> [530.341111] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:244]

<7> [530.341228] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: staged scaling request for 2560x1600->1920x1200 scaler_users = 0x10

<7> [530.341372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054

<7> [530.341444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [530.341508] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0

<7> [530.341568] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99

<7> [530.341628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100

<7> [530.341699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 2088960 num active planes 1

<7> [530.341824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2194 qgv_peak_bw: 38400

<7> [530.341929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2194 qgv_peak_bw: 38400

<7> [530.342025] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.342120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2194 qgv_peak_bw: 38400

<7> [530.342213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2194

<7> [530.342311] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:88:pipe A] attached scaler id 0.0 to PLANE:73

<7> [530.344804] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [530.344913] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [530.346781] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling Panel Replay

<7> [530.347792] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:244] from all active usage due to RMFB ioctl

<7> [530.347830] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:73:plane 5A] because [FB:244] is removed

<7> [530.347857] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:88:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [530.347953] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0

<7> [530.348018] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [530.348110] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 2, 21, 21, 21, 20, 21, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.348201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 31, 442, 442, 442, 421, 442, 0, 0, 45, 85, 99 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.348291] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 36, 488, 488, 488, 465, 488, 0, 0, 46, 95, 100 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [530.348399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [530.348554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [530.348705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [530.348877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.349027] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [530.349154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [530.349433] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling Panel Replay

<7> [530.349534] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<6> [530.367886] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS

Results for igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-a