igt@xe_module_load@load on bat-ptl-2@IGT

Detail	Value
Duration	3.10 seconds
Igt-Version	IGT-Version: 2.4-gc829dad5f (x86_64) (Linux: 7.0.0-lgci-xe-xe-4928-95fbbe4877e154397-debug+ x86_64)
Out	Using IGT_SRANDOM=1776947242 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (3.097s)
Err	Starting subtest: load Subtest load: SUCCESS (3.097s)
Dmesg	<6> [802.659029] [IGT] xe_module_load: executing <4> [802.659096] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [802.663787] [IGT] xe_module_load: starting subtest load <5> [803.061452] Setting dangerous option force_probe - tainting kernel <6> [803.066994] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [803.069270] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode <7> [803.069275] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [803.069958] xe 0000:00:02.0: [drm] Found pantherlake (device ID b083) integrated display version 30.00 stepping B0 <7> [803.069972] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] PANTHERLAKE b083:0004 dgfx:0 gfx:Xe3_LPG (30.00) media:Xe3_LPM (30.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [803.070193] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:*) <7> [803.070422] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <7> [803.073745] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [803.074027] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [803.074260] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 1 (enabled) <7> [803.074521] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6fe5a018 <7> [803.074771] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [803.075017] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [803.075218] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [803.075421] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [803.075603] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [803.075824] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [803.076036] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [803.076263] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [803.076514] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [803.076736] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [803.076957] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [803.077236] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [803.077484] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [803.077710] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=7467 tRP=136 tRDPRE=88 tRAS=320 tRCD=136 tRC=456 <7> [803.077926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [803.078164] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [803.078383] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=42130 peakbw: 102400 <7> [803.078593] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=45877 peakbw: 119472 <7> [803.078816] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [803.079052] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=47566 peakbw: 76800 <7> [803.079265] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=57825 peakbw: 102400 <7> [803.079491] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=64314 peakbw: 119472 <7> [803.079706] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [803.079941] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=56353 peakbw: 76800 <7> [803.080151] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [803.080361] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [803.080572] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [803.080769] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=62087 peakbw: 76800 <7> [803.080962] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [803.081168] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [803.081444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [803.081671] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [803.081867] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [803.082066] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [803.082260] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [803.082460] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800 <7> [803.082647] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400 <7> [803.082831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472 <7> [803.083034] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [803.083779] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [803.084022] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT PANTHERLAKE ", BDB version 266 <7> [803.084226] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [803.084434] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 445, min size 5) <7> [803.084629] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [803.084846] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [803.085040] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 862, min size 850) <7> [803.085218] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [803.085402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [803.085600] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [803.085790] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [803.085969] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [803.086147] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [803.086329] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [803.086508] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [803.086671] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [803.086841] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [803.087026] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 266 not known; assuming 44 <7> [803.087212] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [803.087409] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [803.087595] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [803.087779] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [803.087953] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [803.088131] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [803.088293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [803.088477] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [803.088637] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [803.088797] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [803.088960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [803.089153] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [803.089411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [803.089677] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [803.089942] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [803.090163] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [803.090456] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [803.090678] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [803.090931] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [803.091137] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [803.091387] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [803.091591] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [803.091818] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [803.092006] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [803.092203] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [803.092395] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [803.092589] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [803.092767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [803.092966] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [803.093143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [803.093858] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe3lpd_dmc.bin <7> [803.095984] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [803.096267] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [803.096703] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [803.096910] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 98 (98.0 usec) <7> [803.097093] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 105 (105.0 usec) <7> [803.097269] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 120 (120.0 usec) <7> [803.097542] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 120 (120.0 usec) <7> [803.097729] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 120 (120.0 usec) <7> [803.097926] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [803.098093] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 104 (104.0 usec) <7> [803.098258] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 111 (111.0 usec) <7> [803.098913] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 126 (126.0 usec) <7> [803.099092] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 126 (126.0 usec) <7> [803.099262] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 126 (126.0 usec) <7> [803.100356] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [803.100577] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [803.100788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [803.100996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [803.101214] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f040 = 0xc003e200 (EVT_CTL) <7> [803.101450] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f010 = 0x4b444b18 (EVT_HTP) <7> [803.101652] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [803.101881] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f014 = 0x4d984cd4 (EVT_HTP) <7> [803.102094] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [803.102341] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [803.102538] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f03c = 0xc0032b00 (EVT_CTL) (disabling) <7> [803.102746] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f00c = 0x8240708 (EVT_HTP) <7> [803.102939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [803.103132] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f014 = 0x1ab41a74 (EVT_HTP) <7> [803.103331] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f040 = 0xc0033d00 (EVT_CTL) (disabling) <7> [803.103522] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f010 = 0x8b80824 (EVT_HTP) <7> [803.103717] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [803.103941] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [803.104144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f43c = 0xc0032b00 (EVT_CTL) (disabling) <7> [803.104371] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f40c = 0x88248708 (EVT_HTP) <7> [803.104562] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [803.104749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f414 = 0x9a7c9a3c (EVT_HTP) <7> [803.104938] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f440 = 0xc0033d00 (EVT_CTL) (disabling) <7> [803.105137] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f410 = 0x88b88824 (EVT_HTP) <7> [803.105343] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [803.105528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [803.105729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032b00 (EVT_CTL) (disabling) <7> [803.105905] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x28242708 (EVT_HTP) <7> [803.106073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [803.106240] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f814 = 0x39e839a8 (EVT_HTP) <7> [803.106468] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [803.106633] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5b7c0 <7> [803.106794] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032b00 (EVT_CTL) (disabling) <7> [803.106956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x98249708 (EVT_HTP) <7> [803.107116] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc44 = 0xc0033200 (EVT_CTL) (disabling) <7> [803.107287] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc14 = 0xa9e8a9a8 (EVT_HTP) <7> [803.110728] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <6> [803.116734] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe3lpd_dmc.bin (v2.34) <7> [803.121152] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [803.121417] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 691200 kHz <7> [803.121662] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1382400 kHz <7> [803.121930] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:511:DDI A/PHY A] Using AUX CH A (VBT) <7> [803.122249] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:511:DDI A/PHY A] <7> [803.122627] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [803.122861] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [803.123108] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [803.123358] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [803.123605] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [803.123834] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [803.124066] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [803.124296] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [803.124544] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [803.124805] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:511:DDI A/PHY A] initial power sequencer: PPS 0 <7> [803.125084] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [803.125299] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [803.125597] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [803.125803] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [803.125990] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [803.126203] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [803.126474] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [803.128205] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turning VDD on <7> [803.128537] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7> [803.154355] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 0a c4 41 00 10 01 c0 02 00 00 00 1f 0b 80 <7> [803.166356] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID Balsa2 HW-rev 0.0 SW-rev 91.61 quirks 0x0000 <7> [803.190334] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 b7 ff 00 00 <7> [803.226328] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [803.238329] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [803.298348] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [803.406324] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.430325] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.454325] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.478324] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.502323] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.526322] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.550322] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.574321] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.646318] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.670319] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.694319] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.718317] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.742318] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.766315] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.790316] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.814315] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [803.838354] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz <7> [803.838367] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [803.838371] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [803.838374] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor <7> [803.838379] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0 <7> [803.838533] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:512:eDP-1] using preferred EDID fixed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [803.838698] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:512:eDP-1] using alternate EDID fixed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa <7> [803.850315] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:512:eDP-1] Performing OUI wait (0 ms) <7> [803.862318] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:512:eDP-1] Detected Intel HDR backlight interface version 1 <7> [803.886312] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:512:eDP-1] AUX Backlight Control Supported! <7> [803.886469] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:512:eDP-1] Using VESA eDP backlight controls <7> [803.886619] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:512:eDP-1] DRRS type: none <7> [803.934310] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Using backlight frequency from driver (200Hz) <7> [803.946310] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=1 aux_enable=1 mode=0 <7> [803.946322] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Backlight caps: level=1023/1023 pwm_freq_pre_divider=132 lsb_reg_used=1 <7> [803.946333] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:512:eDP-1] AUX VESA backlight enable is controlled through DPCD <7> [803.946482] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:512:eDP-1] AUX VESA backlight level is controlled through DPCD using Brightness % values <7> [803.946619] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:512:eDP-1] Using AUX VESA interface for backlight control <7> [803.946755] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:512:eDP-1] backlight initialized, disabled, brightness 1023/1023 <7> [803.946972] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [803.947103] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [803.947225] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [803.947358] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [803.947469] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [803.947621] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [803.947863] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:520:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [803.948074] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [803.948231] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:520:DDI TC1/PHY TC1] <7> [803.948704] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:533:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [803.948872] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [803.949027] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:533:DDI TC2/PHY TC2] <7> [803.949354] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [803.949520] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [803.949668] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC3/PHY TC3] <7> [803.949984] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:551:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [803.950163] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7> [803.950372] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [803.950495] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:551:DDI TC4/PHY TC4] <7> [803.950624] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:551:DDI TC4/PHY TC4] Using DDC pin 0xc (VBT) <7> [803.951110] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6> [803.951254] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7> [803.951725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7> [803.951901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled <7> [803.952060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled <7> [803.952215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:508:pipe D] hw state readout: disabled <7> [803.952342] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7> [803.952461] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7> [803.952574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7> [803.952696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7> [803.952812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7> [803.952926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7> [803.953039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B <7> [803.953151] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B <7> [803.953264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B <7> [803.953378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B <7> [803.953485] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B <7> [803.953594] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B <7> [803.953696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C <7> [803.953799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C <7> [803.953900] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C <7> [803.953992] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C <7> [803.954085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C <7> [803.954175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C <7> [803.954267] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:392:plane 1D] hw state readout: disabled, pipe D <7> [803.954374] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:422:plane 2D] hw state readout: disabled, pipe D <7> [803.954464] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:452:plane 3D] hw state readout: disabled, pipe D <7> [803.954552] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:482:plane 4D] hw state readout: disabled, pipe D <7> [803.954638] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:492:plane 5D] hw state readout: disabled, pipe D <7> [803.954724] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:502:cursor D] hw state readout: disabled, pipe D <7> [803.955618] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [803.955768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DDI A/PHY A] hw state readout: enabled, pipe A <7> [803.955884] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [803.956000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:520:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [803.956117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:522:DP-MST A] hw state readout: disabled, pipe A <7> [803.956229] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:523:DP-MST B] hw state readout: disabled, pipe B <7> [803.956335] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DP-MST C] hw state readout: disabled, pipe C <7> [803.956430] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DP-MST D] hw state readout: disabled, pipe D <7> [803.956527] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [803.956632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:533:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [803.956726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A <7> [803.956817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B <7> [803.956907] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C <7> [803.956996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D <7> [803.957089] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [803.957190] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [803.957292] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A <7> [803.957392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B <7> [803.957481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C <7> [803.957572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D <7> [803.957708] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [803.957808] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:551:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [803.958636] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7> [803.958762] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7> [803.958885] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [803.959007] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [803.959131] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [803.959255] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [803.959410] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [803.959541] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [803.959691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:512:eDP-1] hw state readout: enabled <7> [803.959792] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:DP-1] hw state readout: disabled <7> [803.959895] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:DP-2] hw state readout: disabled <7> [803.959994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-3] hw state readout: disabled <7> [803.960085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:552:HDMI-A-1] hw state readout: disabled <7> [803.960255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 159023 kHz <7> [803.960353] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7> [803.960438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7> [803.960519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7> [803.960600] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7> [803.960683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7> [803.960763] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 159023 kHz <7> [803.960846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz <7> [803.960927] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz <7> [803.961004] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz <7> [803.961083] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz <7> [803.961162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz <7> [803.961244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz <7> [803.961330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz <7> [803.961408] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz <7> [803.961489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz <7> [803.961566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz <7> [803.961652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz <7> [803.961735] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz <7> [803.961823] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz <7> [803.961901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz <7> [803.961978] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:392:plane 1D] min_cdclk 0 kHz <7> [803.962056] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:422:plane 2D] min_cdclk 0 kHz <7> [803.962131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:452:plane 3D] min_cdclk 0 kHz <7> [803.962208] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:482:plane 4D] min_cdclk 0 kHz <7> [803.962283] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:492:plane 5D] min_cdclk 0 kHz <7> [803.962375] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:502:cursor D] min_cdclk 0 kHz <7> [803.962452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:508:pipe D] min_cdclk 0 kHz <7> [803.962705] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7> [803.962810] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7> [803.962914] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7> [803.963021] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:508:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7> [803.963124] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1272180 num active planes 1 <7> [803.963268] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [803.963423] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [803.963562] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [803.963752] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [803.964061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7> [803.964223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [803.964371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [803.964519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [803.964668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [803.964797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [803.964929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [803.965053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8234428, data_n: 8388608, link_m: 686202, link_n: 524288, tu: 64 <7> [803.965175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [803.965301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [803.965427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [803.965545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [803.965663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [803.965779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [803.965896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [803.966011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7> [803.966128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1271, vmax: 1271, flipline: 1271, pipeline full: 0, guardband: 70 vsync start: 68, vsync end: 62 <7> [803.966242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1201, vmax vblank: 1201, vmin vtotal: 1271, vmax vtotal: 1271 <7> [803.966368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [803.966487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1200": 120 318045 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [803.966602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1200": 120 318045 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [803.966728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=318045, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1201-1271 vs=1203-1209 vt=1271, flags=0xa <7> [803.966861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1200": 120 318045 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [803.966979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=318045, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1201-1271 vs=1203-1209 vt=1271, flags=0xa <7> [803.967101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 243000, pixel rate 318045, min cdclk 159023, min voltage level 0 <7> [803.967215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 53, ips linetime: 0 <7> [803.967336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [803.967455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1200+0+0 <7> [803.967574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [803.967689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [803.967803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [803.967916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: yes, use_c10: yes, tbt_mode: no <7> [803.968029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7> [803.968141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 8192, rem: 0, den: 1, <7> [803.968252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 253, tx_clk_div: 2. <7> [803.968371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [803.968489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [803.968610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1 <7> [803.968726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x39, pll[5] = 0x12, pll[6] = 0xe3, pll[7] = 0xe9 <7> [803.968831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x1, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [803.968944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2 <7> [803.969053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23 <7> [803.969155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7> [803.969259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [803.969372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [803.969476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [803.969579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [803.969680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [803.969782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [803.969886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [803.969987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [803.970090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [803.970191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [803.970300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [803.970406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state] <7> [803.970515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state] <7> [803.970635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:508:pipe D] enable: no [setup_hw_state] <7> [803.970761] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7> [803.971134] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=1920x1200@32, offset=ff600000, pitch 7680, size 0x8ca000 <7> [803.971667] xe 0000:00:02.0: [drm:xe_alloc_initial_plane_obj [xe]] Failed to create bo phys_base=0x00000000ff600000 size 9216000 with flags 430: -22 <7> [803.971828] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6> [803.980533] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/ptl_guc_70.bin version 70.60.0 <7> [803.985430] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0045a1cf <7> [803.985574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [803.985702] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [803.985826] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [803.985946] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cb6 <7> [803.986062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [803.986187] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [803.986308] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [803.986422] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [803.986532] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [803.986652] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [803.986764] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [803.986870] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [803.986982] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [803.987089] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [803.987251] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [803.998351] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [803.999325] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [803.999636] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,00000bfe <7> [803.999766] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,00000bfe <7> [803.999878] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [803.999984] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [804.000085] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 0000000f,0000000f <6> [804.202957] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [804.202959] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [804.202960] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [804.203117] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [804.203262] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access <7> [804.203509] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access <7> [804.203662] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [804.203795] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access <7> [804.203927] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [804.204094] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [804.204253] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [804.204452] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [804.204573] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [804.204698] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access <7> [804.204817] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [804.206116] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [804.206251] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [804.206402] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [804.206534] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [804.206664] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [804.206790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [804.206927] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xc50c] = 0x00010002 <7> [804.207052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [804.207168] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [804.207288] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [804.207406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [804.207522] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [804.207637] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [804.207763] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [804.207885] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [804.207996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [804.208106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [804.208219] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [804.208337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [804.208447] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [804.208559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [804.208668] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [804.208776] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [804.208884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [804.208991] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [804.209102] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [804.209205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [804.209315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [804.209420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0x00800080 <7> [804.209528] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7> [804.209632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7> [804.209735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7> [804.209834] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7> [804.209931] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7> [804.210028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [804.210134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040 <7> [804.210242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [804.210358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe5f4] = 0x10001000 <7> [804.210739] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [804.210832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [804.210925] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [804.211015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0x00800080 <7> [804.211497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [804.211611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [804.211715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [804.211809] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0x00800080 <7> [804.212195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [804.212292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [804.212388] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [804.212475] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0x00800080 <7> [804.212563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [804.212648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [804.212732] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [804.213298] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [804.213480] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0045a1cf <7> [804.213593] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [804.213700] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [804.213801] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [804.213898] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cb6 <7> [804.213991] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004 <7> [804.214084] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [804.214173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [804.214259] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [804.214359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [804.214445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [804.214531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [804.214616] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [804.214701] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [804.214810] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [804.214990] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [804.217950] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x170d000 for xe_guc_buf_cache_init_with_size [xe] <7> [804.221212] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 60 ext-regs. <7> [804.241660] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7> [804.252958] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034 <7> [804.253381] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [804.255298] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4136 dwords <7> [804.255457] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [804.255568] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10201020 <7> [804.255671] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x731c] = 0x20002000 <7> [804.255774] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x10\|0x10 (MCR) <7> [804.255876] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [804.259221] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [804.259356] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [804.259466] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <7> [804.262941] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [804.263056] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00 <6> [804.267249] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/ptl_guc_70.bin version 70.60.0 <7> [804.273744] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01fef1cf <7> [804.273958] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [804.274074] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [804.274173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [804.274265] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000053e0 <7> [804.274366] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [804.274454] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [804.274539] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [804.274623] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [804.274706] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [804.274789] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [804.274872] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [804.274955] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [804.275038] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [804.276414] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/ptl_huc.bin version 10.3.3 <6> [804.279221] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/ptl_gsc_1.bin version 105.0.2.1397 <6> [804.280711] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [804.280926] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [804.281184] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [804.302322] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [804.302909] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [804.303217] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7> [804.303568] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7> [804.303821] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [804.304061] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <6> [804.304325] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [804.304331] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [804.304334] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [804.304338] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [804.304341] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [804.304344] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [804.304348] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [804.304351] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [804.304355] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [804.304358] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [804.304691] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [804.305094] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [804.305497] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access <7> [804.305856] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access <7> [804.306197] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [804.306527] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access <7> [804.306865] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access <7> [804.307201] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [804.307535] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access <7> [804.307831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access <7> [804.308450] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [804.308744] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [804.309057] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access <7> [804.309410] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access <7> [804.309724] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [804.310024] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access <7> [804.310326] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access <7> [804.310615] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [804.310895] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access <7> [804.311178] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access <7> [804.311547] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [804.313970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [804.314254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [804.314540] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [804.314797] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [804.315038] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [804.315264] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [804.315494] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7> [804.315717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [804.315929] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [804.316142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [804.316372] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [804.316576] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [804.316769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [804.316956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [804.317131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [804.317311] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [804.317482] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [804.317653] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [804.317824] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [804.317994] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [804.318164] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [804.318366] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [804.318544] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [804.318717] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [804.318887] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [804.319050] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [804.319209] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [804.319375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [804.319553] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [804.319722] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [804.319880] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [804.320026] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [804.320169] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [804.320308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [804.320445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [804.320580] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [804.320719] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [804.320853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [804.321563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [804.321714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [804.321853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [804.321984] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [804.322106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [804.322225] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [804.322353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [804.322473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [804.322583] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [804.322690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [804.322798] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [804.323413] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [804.323541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [804.324489] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [804.324687] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01fef1cf <7> [804.324820] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [804.324934] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [804.325042] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [804.325143] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000053e0 <7> [804.325243] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004 <7> [804.325347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [804.325447] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [804.325546] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [804.325644] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [804.325743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [804.325841] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [804.325939] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [804.326034] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [804.326163] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [804.326302] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [804.330071] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x346f000 for xe_guc_buf_cache_init_with_size [xe] <7> [804.367751] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7> [804.389195] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034 <7> [804.389784] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [804.392318] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [804.392621] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [804.398090] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [804.398401] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [804.403716] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [804.404037] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00 <7> [804.427322] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [804.428312] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [804.428705] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [804.429043] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [804.429362] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536 <7> [804.430143] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [804.430435] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [804.430695] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [804.432703] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7> [804.433176] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7> [804.433590] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7> [804.433931] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7> [804.434234] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7> [804.434538] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008 <7> [804.434820] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108 <7> [804.435093] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208 <7> [804.435375] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308 <7> [804.435650] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8 <7> [804.435921] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008 <7> [804.436192] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108 <7> [804.436476] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208 <7> [804.436744] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308 <7> [804.437011] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8 <7> [804.437296] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 0: start 0x59008 <7> [804.437565] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 1: start 0x59108 <7> [804.437830] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 2: start 0x59208 <7> [804.438095] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 3: start 0x59308 <7> [804.438457] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 4: start 0x593c8 <7> [804.439460] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [804.439831] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7> [804.440513] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [804.440764] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7> [804.441027] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4029 - 4096), size 0 -> 67 <7> [804.441335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset] <7> [804.441748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset] <7> [804.442126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:508:pipe D] enable: no [fastset] <7> [804.444385] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7> [804.444707] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [804.451070] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7> [804.451638] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C] <7> [804.452045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:508:pipe D] <7> [804.469380] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:512:eDP-1] adding connector to sysfs <7> [804.476587] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:512:eDP-1] backlight device intel_backlight registered <7> [804.477181] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:512:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [804.477686] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:512:eDP-1] Panel prepare <7> [804.478988] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [804.483393] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:512:eDP-1] generating connector hotplug event <7> [804.483584] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:DP-1] adding connector to sysfs <7> [804.485035] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [804.487373] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:DP-1] generating connector hotplug event <7> [804.487490] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs <7> [804.489608] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [804.491163] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event <7> [804.491269] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs <7> [804.492833] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [804.494359] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event <7> [804.494432] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:552:HDMI-A-1] adding connector to sysfs <7> [804.494940] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:552:HDMI-A-1] generating connector hotplug event <6> [804.494988] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [804.495038] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 5 outputs detected <6> [804.500560] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [804.505283] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7> [804.508206] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [804.508477] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=432 <7> [804.509507] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [804.509518] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [804.511915] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7> [804.512210] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping <6> [804.512643] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [804.513462] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1] <7> [804.513950] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [804.514315] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:521:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [804.514338] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [804.514414] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping <7> [804.514574] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2] <7> [804.514715] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:508:pipe D] not active, skipping <7> [804.514861] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [804.514936] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [804.515104] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [804.515378] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [804.515581] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [804.515652] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [804.515880] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [804.516099] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1] <7> [804.516426] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [804.519241] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7> [804.520397] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [804.520424] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [804.520792] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:552:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [804.521080] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [804.521236] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] <7> [804.521256] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1] <7> [804.522962] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [804.524028] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [804.524322] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000 <7> [804.524570] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000 <7> [804.525038] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz <7> [804.525051] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [804.525057] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [804.525063] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor <7> [804.525075] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0 <7> [804.525142] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes <7> [804.525481] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [804.525707] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [804.526408] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] status updated from unknown to connected <7> [804.527012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes: <7> [804.527025] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [804.527034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa <7> [804.527043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] <7> [804.527053] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1] <7> [804.527529] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected <7> [804.527539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7> [804.527547] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2] <7> [804.527855] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7> [804.527863] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] <7> [804.527870] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [804.528087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected <7> [804.528091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] <7> [804.528095] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1] <7> [804.528573] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [804.532623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected <7> [804.532642] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes <7> [804.532648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no <7> [804.532653] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7> [804.532656] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no <7> [804.532659] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no <7> [804.533169] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [804.533224] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200 <7> [804.533228] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [804.533246] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0) <7> [804.533544] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [804.533689] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6> [804.536624] xe 0000:00:02.0: [drm] Allocated fbdev into stolen <7> [804.538563] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 1920x1200 fb <6> [804.541930] fbcon: xedrmfb (fb0) is primary device <7> [804.545228] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:512:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [804.545786] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:511:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 317250 kHz DSC off max lanes 4 max rate 270000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [804.546184] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 243000 bpp input 24 compressed 0.0000 HDR no link rate required 951750 available 972000 <7> [804.546590] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [804.546971] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:511:DDI A/PHY A] [CRTC:151:pipe A] <7> [804.547342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8234428/8388608 link 686202/524288, found tu 64, data 8213845/8388608 link 684487/524288) <7> [804.547681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7> [804.547991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [804.548303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: yes, use_c10: yes, tbt_mode: no <7> [804.548600] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7> [804.548891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 8192, rem: 0, den: 1, <6> [804.549105] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv105.1.0 <7> [804.549179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 253, tx_clk_div: 2. <7> [804.549534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [804.549817] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [804.550099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1 <7> [804.550411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x39, pll[5] = 0x12, pll[6] = 0xe3, pll[7] = 0xe9 <7> [804.550424] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [804.550698] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x1, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [804.550984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2 <7> [804.551266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23 <7> [804.552985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [804.553359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [804.553690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7> [804.553998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 8192, rem: 0, den: 1, <7> [804.554301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 253, tx_clk_div: 2. <7> [804.554584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [804.554861] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [804.555139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1 <7> [804.555543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [804.555840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [804.556127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2 <7> [804.556430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23 <7> [804.556714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 318045, found 317250) <7> [804.556991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 318045, found 317250) <7> [804.557288] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in vrr.guardband (expected 70, found 69) <7> [804.557561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7> [804.557829] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [804.558104] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [804.558578] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4029), size 0 -> 4029 <7> [804.558895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [804.559169] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 16, 17, 20, 20, 20, 0, 0, 0, 3, 0 <7> [804.559426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 256, 272, 320, 320, 320, 0, 0, 30, 48, 62 <7> [804.559652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 283, 301, 353, 353, 353, 0, 0, 31, 54, 63 <7> [804.559865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [804.560067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.560282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.560486] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.560697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [804.560902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.561108] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.561329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.561536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [804.561741] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.561943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.562143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.562358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [804.562559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.562759] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.562957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.563156] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [804.563360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.563557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.563757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [804.564028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1269000 num active planes 1 <7> [804.564420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1333 qgv_peak_bw: 38400 <7> [804.564736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1333 qgv_peak_bw: 38400 <7> [804.565029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 1333 qgv_peak_bw: 38400 <7> [804.565344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 1333 qgv_peak_bw: 38400 <7> [804.565627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1333 <7> [804.565958] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 159023 kHz -> 158625 kHz <7> [804.566321] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19878 kHz -> 19829 kHz <7> [804.566658] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7> [804.567001] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7> [804.567350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [804.567685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [804.567992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [804.568293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [804.568572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [804.568846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [804.569115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [804.569395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8213845, data_n: 8388608, link_m: 684487, link_n: 524288, tu: 64 <7> [804.569662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [804.569927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [804.570193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [804.570477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [804.570748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [804.571013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [804.571292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [804.571564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [804.571827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [804.572087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [804.572399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [804.572665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [804.572929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [804.573192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [804.573470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1271, vmax: 1271, flipline: 1271, pipeline full: 0, guardband: 69 vsync start: 68, vsync end: 62 <7> [804.573733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1202, vmax vblank: 1202, vmin vtotal: 1271, vmax vtotal: 1271 <7> [804.573993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [804.573955] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [804.574255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [804.574533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [804.574800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa <7> [804.575040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [804.575254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa <7> [804.575476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 243000, pixel rate 317250, min cdclk 158625, min voltage level 0 <7> [804.575676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 53, ips linetime: 0 <7> [804.575872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [804.576092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1200+0+0 <7> [804.576362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [804.576623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [804.576885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [804.577084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [804.577208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7> [804.577341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 8192, rem: 0, den: 1, <7> [804.577466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 253, tx_clk_div: 2. <7> [804.577587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [804.577708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [804.577829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1 <7> [804.577950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [804.578085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [804.578226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2 <7> [804.578374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23 <7> [804.578525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [804.578667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [804.578806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [804.578942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [804.579074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [804.579194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [804.579320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [804.579440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [804.579563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [804.579683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [804.579804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [804.579926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [804.580047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:513] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [804.580175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [804.580304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [804.580429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [804.580553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [804.580674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [804.580796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [804.580918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [804.581116] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [804.581346] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [804.581508] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [804.581658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [804.581794] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [804.581919] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [804.581978] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [804.582041] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [804.582161] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [804.582185] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [804.582285] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [804.582402] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [804.582519] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [804.582636] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [804.582752] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [804.582865] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [804.582977] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [804.583089] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [804.583200] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [804.583324] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [804.583448] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [804.583567] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [804.583683] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [804.583799] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [804.583912] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [804.584025] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [804.584136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [804.584247] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [804.584361] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [804.584473] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [804.584584] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [804.584694] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [804.584804] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [804.584914] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [804.585025] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [804.585136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [804.585248] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [804.585364] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6> [804.596546] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6> [804.599364] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6> [804.600753] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6> [804.601905] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7> [804.788606] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [804.792959] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turn panel power off <7> [804.793546] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 wait for panel power off time <7> [804.794017] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [804.844877] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [804.845615] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [804.846114] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [804.846655] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:511:DDI A/PHY A] - long <7> [804.847037] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [804.847227] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [804.848113] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [804.849710] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0032 0x13410e02) <7> [804.849752] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:511:DDI A/PHY A] <7> [804.850115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DDI A/PHY A] <7> [804.850496] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:520:DDI TC1/PHY TC1] <7> [804.850810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:522:DP-MST A] <7> [804.851097] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:523:DP-MST B] <7> [804.851383] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DP-MST C] <7> [804.851645] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DP-MST D] <7> [804.851902] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:533:DDI TC2/PHY TC2] <7> [804.852157] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DP-MST A] <7> [804.852429] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DP-MST B] <7> [804.852690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST C] <7> [804.852946] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DP-MST D] <7> [804.853202] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC3/PHY TC3] <7> [804.853473] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [804.853730] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [804.853981] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [804.854231] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [804.854494] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:551:DDI TC4/PHY TC4] <7> [804.854823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [804.856344] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [804.856794] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [804.858966] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turn panel power on <7> [804.859358] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7> [805.021320] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [805.354496] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [805.385292] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [805.385739] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 wait for panel power on <7> [805.386108] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [805.411007] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [805.411757] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:511:DDI A/PHY A] - long <7> [805.412417] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [805.413086] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:511:DDI A/PHY A] <7> [805.555010] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [805.555074] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [805.555512] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [805.555515] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [805.595377] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [805.595955] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turning VDD on <7> [805.596429] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [805.598707] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 0a c4 41 00 10 01 c0 02 00 00 00 1f 0b 80 <7> [805.599880] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [805.600772] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 02 <7> [805.601993] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [805.603097] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [805.604266] xe 0000:00:02.0: [drm:intel_dp_get_adjust_train [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [805.604624] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [805.606629] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Clock recovery OK <7> [805.606939] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [805.608415] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [805.608724] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Link Training passed at link rate = 243000, lane count = 4 <7> [805.609596] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [805.610148] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [805.610550] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [805.618820] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [805.621522] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:512:eDP-1] <7> [805.622045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [805.624831] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800011 0xad0f302) <7> [805.626317] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=1023/1023 <6> [805.627332] Console: switching to colour frame buffer device 240x75 <7> [805.627293] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:512:eDP-1] set backlight level = 1023 <6> [805.647769] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [805.647813] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 30 <7> [805.650401] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [805.650879] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [805.651301] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [805.651683] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [805.652055] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [805.652444] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [805.652806] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [805.653163] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [805.653530] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [805.653883] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [805.654230] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [805.654585] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [805.654926] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [805.655276] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [805.655616] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [805.655959] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [805.656310] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [805.656648] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [805.656984] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [805.657331] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [805.657664] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [805.659512] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [805.659980] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [805.660519] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [805.660950] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7> [805.661419] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [805.661804] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [805.662183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [805.662565] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [805.662940] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [805.666751] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [805.666796] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [805.668015] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] <7> [805.668118] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1] <7> [805.669566] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [805.671163] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [805.671613] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000 <7> [805.671996] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000 <7> [805.673644] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz <7> [805.673666] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [805.673674] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [805.673682] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor <7> [805.673719] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0 <7> [805.673808] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes <7> [805.674276] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [805.674653] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [805.676682] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes: <7> [805.676723] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [805.676736] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa <7> [805.676749] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] <7> [805.676762] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1] <7> [805.677383] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [805.677931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected <7> [805.677947] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7> [805.677957] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2] <7> [805.678462] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [805.678875] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7> [805.678888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] <7> [805.678898] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [805.679367] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [805.679758] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected <7> [805.679771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] <7> [805.679782] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1] <7> [805.680314] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [805.684754] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected <7> [805.684772] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes <7> [805.684787] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no <7> [805.684796] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7> [805.684803] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no <7> [805.684810] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no <7> [805.685404] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [805.685516] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200 <7> [805.685527] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config <7> [805.685647] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0) <7> [805.694655] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [805.701407] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [805.702157] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [805.703417] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [805.707008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] <7> [805.707049] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1] <7> [805.709323] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [805.710063] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [805.710507] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000 <7> [805.710897] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000 <7> [805.713155] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz <7> [805.713180] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [805.713194] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [805.713209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor <7> [805.713236] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0 <7> [805.713344] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes <7> [805.713720] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [805.714086] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [805.715554] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes: <7> [805.715880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [805.715895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa <7> [805.715909] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] <7> [805.715924] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1] <7> [805.716441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected <7> [805.716457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7> [805.716470] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2] <7> [805.716874] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7> [805.716889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] <7> [805.716901] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [805.717346] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected <7> [805.717361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] <7> [805.717375] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1] <7> [805.721823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected <7> [805.721843] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes <7> [805.721860] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no <7> [805.721871] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7> [805.721881] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no <7> [805.721890] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no <7> [805.722356] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [805.722433] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200 <7> [805.722447] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config <7> [805.722555] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0) <7> [805.736401] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [805.761106] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [805.761403] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [805.762041] [IGT] xe_module_load: exiting, ret=0

<4> [802.659096] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030

<6> [802.663787] [IGT] xe_module_load: starting subtest load

<5> [803.061452] Setting dangerous option force_probe - tainting kernel

<6> [803.066994] xe 0000:00:02.0: vgaarb: deactivate vga console

<6> [803.069270] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode

<7> [803.069275] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [803.069958] xe 0000:00:02.0: [drm] Found pantherlake (device ID b083) integrated display version 30.00 stepping B0

<7> [803.069972] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] PANTHERLAKE b083:0004 dgfx:0 gfx:Xe3_LPG (30.00) media:Xe3_LPM (30.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [803.070193] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [803.070422] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)

<7> [803.073745] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [803.074027] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [803.074260] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 1 (enabled)

<7> [803.074521] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6fe5a018

<7> [803.074771] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [803.075017] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [803.075218] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [803.075421] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [803.075603] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [803.075824] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [803.076036] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [803.076263] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [803.076514] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [803.076736] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [803.076957] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [803.077236] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [803.077484] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [803.077710] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=7467 tRP=136 tRDPRE=88 tRAS=320 tRCD=136 tRC=456

<7> [803.077926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [803.078164] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [803.078383] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=42130 peakbw: 102400

<7> [803.078593] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=45877 peakbw: 119472

<7> [803.078816] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [803.079052] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=47566 peakbw: 76800

<7> [803.079265] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=57825 peakbw: 102400

<7> [803.079491] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=64314 peakbw: 119472

<7> [803.079706] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [803.079941] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=56353 peakbw: 76800

<7> [803.080151] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400

<7> [803.080361] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472

<7> [803.080572] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [803.080769] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=62087 peakbw: 76800

<7> [803.080962] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400

<7> [803.081168] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472

<7> [803.081444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [803.081671] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800

<7> [803.081867] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400

<7> [803.082066] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472

<7> [803.082260] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [803.082460] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=65000 peakbw: 76800

<7> [803.082647] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=65000 peakbw: 102400

<7> [803.082831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=65000 peakbw: 119472

<7> [803.083034] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [803.083779] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [803.084022] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT PANTHERLAKE ", BDB version 266

<7> [803.084226] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [803.084434] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 445, min size 5)

<7> [803.084629] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [803.084846] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [803.085040] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 862, min size 850)

<7> [803.085218] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [803.085402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [803.085600] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [803.085790] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [803.085969] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [803.086147] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [803.086329] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [803.086508] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [803.086671] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [803.086841] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [803.087026] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 266 not known; assuming 44

<7> [803.087212] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [803.087409] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [803.087595] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [803.087779] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [803.087953] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2

<7> [803.088131] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [803.088293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [803.088477] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [803.088637] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [803.088797] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [803.088960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [803.089153] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [803.089411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [803.089677] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [803.089942] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [803.090163] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [803.090456] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [803.090678] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [803.090931] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [803.091137] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [803.091387] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [803.091591] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [803.091818] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [803.092006] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [803.092203] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [803.092395] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [803.092589] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [803.092767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [803.092966] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [803.093143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [803.093858] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe3lpd_dmc.bin

<7> [803.095984] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [803.096267] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [803.096703] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [803.096910] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 98 (98.0 usec)

<7> [803.097093] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 105 (105.0 usec)

<7> [803.097269] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 120 (120.0 usec)

<7> [803.097542] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 120 (120.0 usec)

<7> [803.097729] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 120 (120.0 usec)

<7> [803.097926] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [803.098093] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 104 (104.0 usec)

<7> [803.098258] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 111 (111.0 usec)

<7> [803.098913] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 126 (126.0 usec)

<7> [803.099092] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 126 (126.0 usec)

<7> [803.099262] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 126 (126.0 usec)

<7> [803.100356] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [803.100577] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [803.100788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [803.100996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [803.101214] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f040 = 0xc003e200 (EVT_CTL)

<7> [803.101450] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f010 = 0x4b444b18 (EVT_HTP)

<7> [803.101652] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [803.101881] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f014 = 0x4d984cd4 (EVT_HTP)

<7> [803.102094] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [803.102341] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [803.102538] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f03c = 0xc0032b00 (EVT_CTL) (disabling)

<7> [803.102746] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f00c = 0x8240708 (EVT_HTP)

<7> [803.102939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [803.103132] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f014 = 0x1ab41a74 (EVT_HTP)

<7> [803.103331] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f040 = 0xc0033d00 (EVT_CTL) (disabling)

<7> [803.103522] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f010 = 0x8b80824 (EVT_HTP)

<7> [803.103717] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [803.103941] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [803.104144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f43c = 0xc0032b00 (EVT_CTL) (disabling)

<7> [803.104371] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f40c = 0x88248708 (EVT_HTP)

<7> [803.104562] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [803.104749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f414 = 0x9a7c9a3c (EVT_HTP)

<7> [803.104938] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f440 = 0xc0033d00 (EVT_CTL) (disabling)

<7> [803.105137] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f410 = 0x88b88824 (EVT_HTP)

<7> [803.105343] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [803.105528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [803.105729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032b00 (EVT_CTL) (disabling)

<7> [803.105905] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x28242708 (EVT_HTP)

<7> [803.106073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [803.106240] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f814 = 0x39e839a8 (EVT_HTP)

<7> [803.106468] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4:

<7> [803.106633] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5b7c0

<7> [803.106794] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032b00 (EVT_CTL) (disabling)

<7> [803.106956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x98249708 (EVT_HTP)

<7> [803.107116] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc44 = 0xc0033200 (EVT_CTL) (disabling)

<7> [803.107287] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc14 = 0xa9e8a9a8 (EVT_HTP)

<7> [803.110728] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available.

<6> [803.116734] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe3lpd_dmc.bin (v2.34)

<7> [803.121152] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [803.121417] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 691200 kHz

<7> [803.121662] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1382400 kHz

<7> [803.121930] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:511:DDI A/PHY A] Using AUX CH A (VBT)

<7> [803.122249] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:511:DDI A/PHY A]

<7> [803.122627] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [803.122861] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [803.123108] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [803.123358] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [803.123605] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [803.123834] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [803.124066] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [803.124296] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [803.124544] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [803.124805] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:511:DDI A/PHY A] initial power sequencer: PPS 0

<7> [803.125084] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [803.125299] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [803.125597] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [803.125803] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [803.125990] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [803.126203] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [803.126474] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [803.128205] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turning VDD on

<7> [803.128537] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f

<7> [803.154355] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 0a c4 41 00 10 01 c0 02 00 00 00 1f 0b 80

<7> [803.166356] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID Balsa2 HW-rev 0.0 SW-rev 91.61 quirks 0x0000

<7> [803.190334] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 b7 ff 00 00

<7> [803.226328] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [803.238329] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [803.298348] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [803.406324] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.430325] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.454325] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.478324] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.502323] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.526322] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.550322] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.574321] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.646318] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.670319] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.694319] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.718317] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.742318] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.766315] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.790316] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.814315] xe 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [803.838354] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz

<7> [803.838367] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [803.838371] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [803.838374] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor

<7> [803.838379] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0

<7> [803.838533] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:512:eDP-1] using preferred EDID fixed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [803.838698] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:512:eDP-1] using alternate EDID fixed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa

<7> [803.850315] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:512:eDP-1] Performing OUI wait (0 ms)

<7> [803.862318] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:512:eDP-1] Detected Intel HDR backlight interface version 1

<7> [803.886312] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:512:eDP-1] AUX Backlight Control Supported!

<7> [803.886469] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:512:eDP-1] Using VESA eDP backlight controls

<7> [803.886619] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:512:eDP-1] DRRS type: none

<7> [803.934310] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Using backlight frequency from driver (200Hz)

<7> [803.946310] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=1 aux_enable=1 mode=0

<7> [803.946322] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Backlight caps: level=1023/1023 pwm_freq_pre_divider=132 lsb_reg_used=1

<7> [803.946333] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:512:eDP-1] AUX VESA backlight enable is controlled through DPCD

<7> [803.946482] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:512:eDP-1] AUX VESA backlight level is controlled through DPCD using Brightness % values

<7> [803.946619] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:512:eDP-1] Using AUX VESA interface for backlight control

<7> [803.946755] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:512:eDP-1] backlight initialized, disabled, brightness 1023/1023

<7> [803.946972] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [803.947103] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [803.947225] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [803.947358] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [803.947469] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [803.947621] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [803.947863] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:520:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [803.948074] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [803.948231] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:520:DDI TC1/PHY TC1]

<7> [803.948704] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:533:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [803.948872] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [803.949027] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:533:DDI TC2/PHY TC2]

<7> [803.949354] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [803.949520] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [803.949668] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC3/PHY TC3]

<7> [803.949984] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:551:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)

<7> [803.950163] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected)

<7> [803.950372] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [803.950495] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:551:DDI TC4/PHY TC4]

<7> [803.950624] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:551:DDI TC4/PHY TC4] Using DDC pin 0xc (VBT)

<7> [803.951110] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled

<6> [803.951254] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem

<7> [803.951725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled

<7> [803.951901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled

<7> [803.952060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled

<7> [803.952215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:508:pipe D] hw state readout: disabled

<7> [803.952342] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A

<7> [803.952461] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A

<7> [803.952574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A

<7> [803.952696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A

<7> [803.952812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A

<7> [803.952926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A

<7> [803.953039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B

<7> [803.953151] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B

<7> [803.953264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B

<7> [803.953378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B

<7> [803.953485] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B

<7> [803.953594] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B

<7> [803.953696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C

<7> [803.953799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C

<7> [803.953900] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C

<7> [803.953992] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C

<7> [803.954085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C

<7> [803.954175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C

<7> [803.954267] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:392:plane 1D] hw state readout: disabled, pipe D

<7> [803.954374] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:422:plane 2D] hw state readout: disabled, pipe D

<7> [803.954464] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:452:plane 3D] hw state readout: disabled, pipe D

<7> [803.954552] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:482:plane 4D] hw state readout: disabled, pipe D

<7> [803.954638] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:492:plane 5D] hw state readout: disabled, pipe D

<7> [803.954724] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:502:cursor D] hw state readout: disabled, pipe D

<7> [803.955618] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [803.955768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DDI A/PHY A] hw state readout: enabled, pipe A

<7> [803.955884] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [803.956000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:520:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [803.956117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:522:DP-MST A] hw state readout: disabled, pipe A

<7> [803.956229] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:523:DP-MST B] hw state readout: disabled, pipe B

<7> [803.956335] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DP-MST C] hw state readout: disabled, pipe C

<7> [803.956430] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DP-MST D] hw state readout: disabled, pipe D

<7> [803.956527] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [803.956632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:533:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [803.956726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A

<7> [803.956817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B

<7> [803.956907] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C

<7> [803.956996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D

<7> [803.957089] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [803.957190] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [803.957292] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A

<7> [803.957392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B

<7> [803.957481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C

<7> [803.957572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D

<7> [803.957708] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [803.957808] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:551:DDI TC4/PHY TC4] hw state readout: disabled, pipe A

<7> [803.958636] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0

<7> [803.958762] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1

<7> [803.958885] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [803.959007] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [803.959131] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [803.959255] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [803.959410] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [803.959541] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [803.959691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:512:eDP-1] hw state readout: enabled

<7> [803.959792] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:DP-1] hw state readout: disabled

<7> [803.959895] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:DP-2] hw state readout: disabled

<7> [803.959994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-3] hw state readout: disabled

<7> [803.960085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:552:HDMI-A-1] hw state readout: disabled

<7> [803.960255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 159023 kHz

<7> [803.960353] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz

<7> [803.960438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz

<7> [803.960519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz

<7> [803.960600] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz

<7> [803.960683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz

<7> [803.960763] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 159023 kHz

<7> [803.960846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz

<7> [803.960927] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz

<7> [803.961004] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz

<7> [803.961083] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz

<7> [803.961162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz

<7> [803.961244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz

<7> [803.961330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz

<7> [803.961408] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz

<7> [803.961489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz

<7> [803.961566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz

<7> [803.961652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz

<7> [803.961735] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz

<7> [803.961823] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz

<7> [803.961901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz

<7> [803.961978] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:392:plane 1D] min_cdclk 0 kHz

<7> [803.962056] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:422:plane 2D] min_cdclk 0 kHz

<7> [803.962131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:452:plane 3D] min_cdclk 0 kHz

<7> [803.962208] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:482:plane 4D] min_cdclk 0 kHz

<7> [803.962283] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:492:plane 5D] min_cdclk 0 kHz

<7> [803.962375] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:502:cursor D] min_cdclk 0 kHz

<7> [803.962452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:508:pipe D] min_cdclk 0 kHz

<7> [803.962705] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no

<7> [803.962810] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no

<7> [803.962914] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no

<7> [803.963021] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:508:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no

<7> [803.963124] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1272180 num active planes 1

<7> [803.963268] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [803.963423] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [803.963562] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0

<7> [803.963752] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [803.964061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state]

<7> [803.964223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [803.964371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [803.964519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [803.964668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [803.964797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [803.964929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [803.965053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8234428, data_n: 8388608, link_m: 686202, link_n: 524288, tu: 64

<7> [803.965175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [803.965301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [803.965427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [803.965545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [803.965663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [803.965779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [803.965896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [803.966011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1

<7> [803.966128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1271, vmax: 1271, flipline: 1271, pipeline full: 0, guardband: 70 vsync start: 68, vsync end: 62

<7> [803.966242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1201, vmax vblank: 1201, vmin vtotal: 1271, vmax vtotal: 1271

<7> [803.966368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [803.966487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1200": 120 318045 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [803.966602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1200": 120 318045 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [803.966728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=318045, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1201-1271 vs=1203-1209 vt=1271, flags=0xa

<7> [803.966861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1200": 120 318045 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [803.966979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=318045, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1201-1271 vs=1203-1209 vt=1271, flags=0xa

<7> [803.967101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 243000, pixel rate 318045, min cdclk 159023, min voltage level 0

<7> [803.967215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 53, ips linetime: 0

<7> [803.967336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [803.967455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1200+0+0

<7> [803.967574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [803.967689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [803.967803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [803.967916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: yes, use_c10: yes, tbt_mode: no

<7> [803.968029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,

<7> [803.968141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 8192, rem: 0, den: 1,

<7> [803.968252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 253, tx_clk_div: 2.

<7> [803.968371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [803.968489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [803.968610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1

<7> [803.968726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x39, pll[5] = 0x12, pll[6] = 0xe3, pll[7] = 0xe9

<7> [803.968831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x1, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [803.968944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2

<7> [803.969053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23

<7> [803.969155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0

<7> [803.969259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [803.969372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [803.969476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [803.969579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [803.969680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [803.969782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [803.969886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [803.969987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [803.970090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [803.970191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [803.970300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [803.970406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state]

<7> [803.970515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state]

<7> [803.970635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:508:pipe D] enable: no [setup_hw_state]

<7> [803.970761] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<7> [803.971134] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=1920x1200@32, offset=ff600000, pitch 7680, size 0x8ca000

<7> [803.971667] xe 0000:00:02.0: [drm:xe_alloc_initial_plane_obj [xe]] Failed to create bo phys_base=0x00000000ff600000 size 9216000 with flags 430: -22

<7> [803.971828] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A]

<6> [803.980533] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/ptl_guc_70.bin version 70.60.0

<7> [803.985430] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0045a1cf

<7> [803.985574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [803.985702] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [803.985826] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [803.985946] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cb6

<7> [803.986062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004

<7> [803.986187] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [803.986308] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [803.986422] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [803.986532] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [803.986652] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [803.986764] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [803.986870] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [803.986982] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [803.987089] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [803.987251] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [803.998351] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034

<7> [803.999325] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [803.999636] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,00000bfe

<7> [803.999766] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,00000bfe

<7> [803.999878] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [803.999984] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [804.000085] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 0000000f,0000000f

<6> [804.202957] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [804.202959] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [804.202960] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [804.203117] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [804.203262] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access

<7> [804.203509] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access

<7> [804.203662] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [804.203795] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access

<7> [804.203927] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [804.204094] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [804.204253] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [804.204452] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [804.204573] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [804.204698] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access

<7> [804.204817] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [804.206116] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [804.206251] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [804.206402] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [804.206534] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [804.206664] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [804.206790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [804.206927] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xc50c] = 0x00010002

<7> [804.207052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [804.207168] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [804.207288] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [804.207406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [804.207522] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [804.207637] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [804.207763] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [804.207885] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [804.207996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [804.208106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [804.208219] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [804.208337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [804.208447] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [804.208559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [804.208668] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [804.208776] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [804.208884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [804.208991] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [804.209102] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [804.209205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [804.209315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [804.209420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0x00800080

<7> [804.209528] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210

<7> [804.209632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8

<7> [804.209735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc

<7> [804.209834] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01

<7> [804.209931] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c

<7> [804.210028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [804.210134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x00400040

<7> [804.210242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [804.210358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe5f4] = 0x10001000

<7> [804.210739] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [804.210832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [804.210925] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [804.211015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0x00800080

<7> [804.211497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [804.211611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [804.211715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [804.211809] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0x00800080

<7> [804.212195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [804.212292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [804.212388] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [804.212475] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0x00800080

<7> [804.212563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [804.212648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [804.212732] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [804.213298] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [804.213480] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0045a1cf

<7> [804.213593] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [804.213700] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [804.213801] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [804.213898] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cb6

<7> [804.213991] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xb0830004

<7> [804.214084] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [804.214173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [804.214259] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [804.214359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [804.214445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [804.214531] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [804.214616] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [804.214701] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [804.214810] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [804.214990] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [804.217950] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x170d000 for xe_guc_buf_cache_init_with_size [xe]

<7> [804.221212] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 60 ext-regs.

<7> [804.241660] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)

<7> [804.252958] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2000MHz (req = 2000MHz), before = 2000MHz, status = 0x8002F034

<7> [804.253381] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [804.255298] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4136 dwords

<7> [804.255457] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [804.255568] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10201020

<7> [804.255671] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x731c] = 0x20002000

<7> [804.255774] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x10|0x10 (MCR)

<7> [804.255876] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00

<7> [804.259221] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [804.259356] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [804.259466] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00

<7> [804.262941] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [804.263056] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 30.00

<6> [804.267249] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/ptl_guc_70.bin version 70.60.0

<7> [804.273744] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01fef1cf

<7> [804.273958] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [804.274074] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [804.274173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [804.274265] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000053e0

<7> [804.274366] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004

<7> [804.274454] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [804.274539] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [804.274623] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [804.274706] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [804.274789] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [804.274872] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [804.274955] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [804.275038] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [804.276414] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/ptl_huc.bin version 10.3.3

<6> [804.279221] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/ptl_gsc_1.bin version 105.0.2.1397

<6> [804.280711] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [804.280926] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [804.281184] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [804.302322] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034

<7> [804.302909] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [804.303217] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000

<7> [804.303568] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000

<7> [804.303821] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [804.304061] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<6> [804.304325] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [804.304331] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [804.304334] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [804.304338] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [804.304341] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [804.304344] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [804.304348] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [804.304351] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [804.304355] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [804.304358] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [804.304691] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [804.305094] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [804.305497] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access

<7> [804.305856] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access

<7> [804.306197] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [804.306527] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access

<7> [804.306865] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access

<7> [804.307201] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [804.307535] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access

<7> [804.307831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access

<7> [804.308450] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [804.308744] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [804.309057] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access

<7> [804.309410] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access

<7> [804.309724] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [804.310024] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access

<7> [804.310326] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access

<7> [804.310615] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [804.310895] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access

<7> [804.311178] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access

<7> [804.311547] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [804.313970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [804.314254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [804.314540] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [804.314797] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [804.315038] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [804.315264] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [804.315494] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002

<7> [804.315717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [804.315929] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [804.316142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [804.316372] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [804.316576] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [804.316769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [804.316956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [804.317131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [804.317311] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [804.317482] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [804.317653] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [804.317824] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [804.317994] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [804.318164] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [804.318366] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [804.318544] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [804.318717] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [804.318887] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [804.319050] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [804.319209] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [804.319375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [804.319553] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [804.319722] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [804.319880] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [804.320026] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [804.320169] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [804.320308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [804.320445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [804.320580] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [804.320719] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [804.320853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [804.321563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [804.321714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [804.321853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [804.321984] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [804.322106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [804.322225] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [804.322353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [804.322473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [804.322583] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [804.322690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [804.322798] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [804.323413] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [804.323541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [804.324489] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [804.324687] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01fef1cf

<7> [804.324820] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [804.324934] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [804.325042] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [804.325143] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000053e0

<7> [804.325243] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xb0830004

<7> [804.325347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [804.325447] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [804.325546] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [804.325644] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [804.325743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [804.325841] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [804.325939] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [804.326034] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [804.326163] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [804.326302] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [804.330071] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x346f000 for xe_guc_buf_cache_init_with_size [xe]

<7> [804.367751] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152)

<7> [804.389195] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 1200MHz (req = 1200MHz), before = 1200MHz, status = 0x8002F034

<7> [804.389784] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [804.392318] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [804.392621] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00

<7> [804.398090] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [804.398401] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00

<7> [804.403716] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [804.404037] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 30.00

<7> [804.427322] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [804.428312] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536

<7> [804.428705] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536

<7> [804.429043] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536

<7> [804.429362] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=80, pf_queue->size=65536

<7> [804.430143] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [804.430435] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [804.430695] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [804.432703] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008

<7> [804.433176] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108

<7> [804.433590] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208

<7> [804.433931] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308

<7> [804.434234] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8

<7> [804.434538] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008

<7> [804.434820] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108

<7> [804.435093] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208

<7> [804.435375] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308

<7> [804.435650] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8

<7> [804.435921] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008

<7> [804.436192] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108

<7> [804.436476] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208

<7> [804.436744] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308

<7> [804.437011] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8

<7> [804.437296] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 0: start 0x59008

<7> [804.437565] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 1: start 0x59108

<7> [804.437830] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 2: start 0x59208

<7> [804.438095] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 3: start 0x59308

<7> [804.438457] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:508:pipe D] FQ 4: start 0x593c8

<7> [804.439460] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [804.439831] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1

<7> [804.440513] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [804.440764] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1

<7> [804.441027] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4029 - 4096), size 0 -> 67

<7> [804.441335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset]

<7> [804.441748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset]

<7> [804.442126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:508:pipe D] enable: no [fastset]

<7> [804.444385] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)

<7> [804.444707] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [804.451070] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]

<7> [804.451638] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C]

<7> [804.452045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:508:pipe D]

<7> [804.469380] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:512:eDP-1] adding connector to sysfs

<7> [804.476587] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:512:eDP-1] backlight device intel_backlight registered

<7> [804.477181] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:512:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [804.477686] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:512:eDP-1] Panel prepare

<7> [804.478988] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [804.483393] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:512:eDP-1] generating connector hotplug event

<7> [804.483584] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:DP-1] adding connector to sysfs

<7> [804.485035] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [804.487373] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:DP-1] generating connector hotplug event

<7> [804.487490] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs

<7> [804.489608] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [804.491163] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event

<7> [804.491269] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs

<7> [804.492833] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [804.494359] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event

<7> [804.494432] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:552:HDMI-A-1] adding connector to sysfs

<7> [804.494940] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:552:HDMI-A-1] generating connector hotplug event

<6> [804.494988] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [804.495038] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 5 outputs detected

<6> [804.500560] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [804.505283] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5

<7> [804.508206] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [804.508477] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=432

<7> [804.509507] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix

<6> [804.509518] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [804.511915] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping

<7> [804.512210] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping

<6> [804.512643] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [804.513462] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]

<7> [804.513950] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [804.514315] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:521:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [804.514338] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [804.514414] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping

<7> [804.514574] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]

<7> [804.514715] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:508:pipe D] not active, skipping

<7> [804.514861] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [804.514936] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [804.515104] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [804.515378] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [804.515581] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [804.515652] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [804.515880] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [804.516099] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]

<7> [804.516426] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [804.519241] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01

<7> [804.520397] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [804.520424] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [804.520792] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:552:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [804.521080] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [804.521236] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]

<7> [804.521256] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]

<7> [804.522962] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [804.524028] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [804.524322] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000

<7> [804.524570] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000

<7> [804.525038] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz

<7> [804.525051] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [804.525057] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [804.525063] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor

<7> [804.525075] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0

<7> [804.525142] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes

<7> [804.525481] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [804.525707] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [804.526408] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] status updated from unknown to connected

<7> [804.527012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:

<7> [804.527025] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [804.527034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa

<7> [804.527043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]

<7> [804.527053] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]

<7> [804.527529] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected

<7> [804.527539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]

<7> [804.527547] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]

<7> [804.527855] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected

<7> [804.527863] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]

<7> [804.527870] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [804.528087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected

<7> [804.528091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]

<7> [804.528095] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]

<7> [804.528573] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [804.532623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected

<7> [804.532642] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes

<7> [804.532648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no

<7> [804.532653] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no

<7> [804.532656] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no

<7> [804.532659] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no

<7> [804.533169] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [804.533224] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200

<7> [804.533228] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [804.533246] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)

<7> [804.533544] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [804.533689] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<6> [804.536624] xe 0000:00:02.0: [drm] Allocated fbdev into stolen

<7> [804.538563] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 1920x1200 fb

<6> [804.541930] fbcon: xedrmfb (fb0) is primary device

<7> [804.545228] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:512:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [804.545786] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:511:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 317250 kHz DSC off max lanes 4 max rate 270000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [804.546184] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 243000 bpp input 24 compressed 0.0000 HDR no link rate required 951750 available 972000

<7> [804.546590] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [804.546971] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:511:DDI A/PHY A] [CRTC:151:pipe A]

<7> [804.547342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8234428/8388608 link 686202/524288, found tu 64, data 8213845/8388608 link 684487/524288)

<7> [804.547681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state

<7> [804.547991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [804.548303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: yes, use_c10: yes, tbt_mode: no

<7> [804.548600] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,

<7> [804.548891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 8192, rem: 0, den: 1,

<6> [804.549105] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv105.1.0

<7> [804.549179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 253, tx_clk_div: 2.

<7> [804.549534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [804.549817] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [804.550099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1

<7> [804.550411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x39, pll[5] = 0x12, pll[6] = 0xe3, pll[7] = 0xe9

<7> [804.550424] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [804.550698] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x1, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [804.550984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2

<7> [804.551266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23

<7> [804.552985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [804.553359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [804.553690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,

<7> [804.553998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 8192, rem: 0, den: 1,

<7> [804.554301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 253, tx_clk_div: 2.

<7> [804.554584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [804.554861] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [804.555139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1

<7> [804.555543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [804.555840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [804.556127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2

<7> [804.556430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23

<7> [804.556714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 318045, found 317250)

<7> [804.556991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 318045, found 317250)

<7> [804.557288] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in vrr.guardband (expected 70, found 69)

<7> [804.557561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)

<7> [804.557829] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [804.558104] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [804.558578] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4029), size 0 -> 4029

<7> [804.558895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [804.559169] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 16, 17, 20, 20, 20, 0, 0, 0, 3, 0

<7> [804.559426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 256, 272, 320, 320, 320, 0, 0, 30, 48, 62

<7> [804.559652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 283, 301, 353, 353, 353, 0, 0, 31, 54, 63

<7> [804.559865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [804.560067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.560282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.560486] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.560697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [804.560902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.561108] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.561329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.561536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [804.561741] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.561943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.562143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.562358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [804.562559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.562759] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.562957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.563156] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [804.563360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.563557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.563757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [804.564028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1269000 num active planes 1

<7> [804.564420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1333 qgv_peak_bw: 38400

<7> [804.564736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1333 qgv_peak_bw: 38400

<7> [804.565029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 1333 qgv_peak_bw: 38400

<7> [804.565344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 1333 qgv_peak_bw: 38400

<7> [804.565627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1333

<7> [804.565958] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 159023 kHz -> 158625 kHz

<7> [804.566321] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19878 kHz -> 19829 kHz

<7> [804.566658] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0

<7> [804.567001] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0

<7> [804.567350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [804.567685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [804.567992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [804.568293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [804.568572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [804.568846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [804.569115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [804.569395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8213845, data_n: 8388608, link_m: 684487, link_n: 524288, tu: 64

<7> [804.569662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [804.569927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [804.570193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [804.570477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [804.570748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [804.571013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [804.571292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [804.571564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [804.571827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [804.572087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [804.572399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [804.572665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [804.572929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [804.573192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [804.573470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1271, vmax: 1271, flipline: 1271, pipeline full: 0, guardband: 69 vsync start: 68, vsync end: 62

<7> [804.573733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1202, vmax vblank: 1202, vmin vtotal: 1271, vmax vtotal: 1271

<7> [804.573993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [804.573955] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [804.574255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [804.574533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [804.574800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa

<7> [804.575040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [804.575254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa

<7> [804.575476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 243000, pixel rate 317250, min cdclk 158625, min voltage level 0

<7> [804.575676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 53, ips linetime: 0

<7> [804.575872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [804.576092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1200+0+0

<7> [804.576362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [804.576623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [804.576885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [804.577084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [804.577208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,

<7> [804.577341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 8192, rem: 0, den: 1,

<7> [804.577466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 253, tx_clk_div: 2.

<7> [804.577587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [804.577708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [804.577829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1

<7> [804.577950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [804.578085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [804.578226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2

<7> [804.578374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23

<7> [804.578525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [804.578667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [804.578806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [804.578942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [804.579074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [804.579194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [804.579320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [804.579440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [804.579563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [804.579683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [804.579804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [804.579926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [804.580047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:513] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [804.580175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [804.580304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [804.580429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [804.580553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [804.580674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [804.580796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [804.580918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [804.581116] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [804.581346] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [804.581508] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [804.581658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [804.581794] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [804.581919] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [804.581978] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [804.582041] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [804.582161] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [804.582185] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [804.582285] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [804.582402] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [804.582519] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [804.582636] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [804.582752] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [804.582865] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [804.582977] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [804.583089] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [804.583200] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [804.583324] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [804.583448] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [804.583567] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [804.583683] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [804.583799] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [804.583912] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [804.584025] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [804.584136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [804.584247] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [804.584361] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [804.584473] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [804.584584] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [804.584694] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [804.584804] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [804.584914] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [804.585025] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<7> [804.585136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<7> [804.585248] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<7> [804.585364] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<6> [804.596546] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6

<6> [804.599364] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7

<6> [804.600753] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8

<6> [804.601905] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9

<7> [804.788606] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [804.792959] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turn panel power off

<7> [804.793546] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [804.794017] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [804.844877] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [804.845615] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [804.846114] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [804.846655] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:511:DDI A/PHY A] - long

<7> [804.847037] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [804.847227] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [804.848113] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [804.849710] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0032 0x13410e02)

<7> [804.849752] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:511:DDI A/PHY A]

<7> [804.850115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DDI A/PHY A]

<7> [804.850496] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:520:DDI TC1/PHY TC1]

<7> [804.850810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:522:DP-MST A]

<7> [804.851097] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:523:DP-MST B]

<7> [804.851383] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DP-MST C]

<7> [804.851645] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DP-MST D]

<7> [804.851902] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:533:DDI TC2/PHY TC2]

<7> [804.852157] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DP-MST A]

<7> [804.852429] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DP-MST B]

<7> [804.852690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST C]

<7> [804.852946] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DP-MST D]

<7> [804.853202] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC3/PHY TC3]

<7> [804.853473] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [804.853730] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [804.853981] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [804.854231] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [804.854494] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:551:DDI TC4/PHY TC4]

<7> [804.854823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [804.856344] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [804.856794] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [804.858966] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turn panel power on

<7> [804.859358] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)

<7> [805.021320] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [805.354496] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [805.385292] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [805.385739] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 wait for panel power on

<7> [805.386108] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [805.411007] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [805.411757] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:511:DDI A/PHY A] - long

<7> [805.412417] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [805.413086] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:511:DDI A/PHY A]

<7> [805.555010] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [805.555074] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [805.555512] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [805.555515] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [805.595377] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [805.595955] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 turning VDD on

<7> [805.596429] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:511:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [805.598707] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 0a c4 41 00 10 01 c0 02 00 00 00 1f 0b 80

<7> [805.599880] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [805.600772] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 02

<7> [805.601993] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [805.603097] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [805.604266] xe 0000:00:02.0: [drm:intel_dp_get_adjust_train [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [805.604624] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [805.606629] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Clock recovery OK

<7> [805.606939] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [805.608415] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [805.608724] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:512:eDP-1][ENCODER:511:DDI A/PHY A][DPRX] Link Training passed at link rate = 243000, lane count = 4

<7> [805.609596] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [805.610148] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [805.610550] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [805.618820] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [805.621522] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:512:eDP-1]

<7> [805.622045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [805.624831] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800011 0xad0f302)

<7> [805.626317] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=1023/1023

<6> [805.627332] Console: switching to colour frame buffer device 240x75

<7> [805.627293] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:512:eDP-1] set backlight level = 1023

<6> [805.647769] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [805.647813] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 30

<7> [805.650401] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [805.650879] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [805.651301] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [805.651683] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [805.652055] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [805.652444] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [805.652806] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [805.653163] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [805.653530] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [805.653883] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [805.654230] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [805.654585] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [805.654926] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [805.655276] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [805.655616] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [805.655959] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [805.656310] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [805.656648] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [805.656984] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [805.657331] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [805.657664] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [805.659512] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [805.659980] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [805.660519] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [805.660950] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000)

<7> [805.661419] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [805.661804] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [805.662183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [805.662565] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [805.662940] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [805.666751] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [805.666796] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [805.668015] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]

<7> [805.668118] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]

<7> [805.669566] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [805.671163] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [805.671613] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000

<7> [805.671996] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000

<7> [805.673644] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz

<7> [805.673666] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [805.673674] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [805.673682] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor

<7> [805.673719] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0

<7> [805.673808] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes

<7> [805.674276] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [805.674653] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [805.676682] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:

<7> [805.676723] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [805.676736] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa

<7> [805.676749] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]

<7> [805.676762] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]

<7> [805.677383] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [805.677931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected

<7> [805.677947] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]

<7> [805.677957] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]

<7> [805.678462] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [805.678875] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected

<7> [805.678888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]

<7> [805.678898] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [805.679367] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [805.679758] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected

<7> [805.679771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]

<7> [805.679782] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]

<7> [805.680314] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [805.684754] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected

<7> [805.684772] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes

<7> [805.684787] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no

<7> [805.684796] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no

<7> [805.684803] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no

<7> [805.684810] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no

<7> [805.685404] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [805.685516] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200

<7> [805.685527] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config

<7> [805.685647] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)

<7> [805.694655] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [805.701407] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [805.702157] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [805.703417] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [805.707008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]

<7> [805.707049] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]

<7> [805.709323] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [805.710063] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [805.710507] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000

<7> [805.710897] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000

<7> [805.713155] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz

<7> [805.713180] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [805.713194] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [805.713209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor

<7> [805.713236] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0

<7> [805.713344] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes

<7> [805.713720] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [805.714086] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [805.715554] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:

<7> [805.715880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [805.715895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa

<7> [805.715909] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]

<7> [805.715924] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]

<7> [805.716441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected

<7> [805.716457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]

<7> [805.716470] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]

<7> [805.716874] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected

<7> [805.716889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]

<7> [805.716901] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [805.717346] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected

<7> [805.717361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]

<7> [805.717375] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]

<7> [805.721823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected

<7> [805.721843] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes

<7> [805.721860] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no

<7> [805.721871] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no

<7> [805.721881] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no

<7> [805.721890] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no

<7> [805.722356] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [805.722433] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200

<7> [805.722447] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config

<7> [805.722555] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)

<7> [805.736401] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [805.761106] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [805.761403] [IGT] xe_module_load: finished subtest load, SUCCESS

<6> [805.762041] [IGT] xe_module_load: exiting, ret=0

Results for igt@xe_module_load@load