Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 0.90 seconds |
| Igt-Version |
IGT-Version: 2.4-gc829dad5f (x86_64) (Linux: 7.0.0-lgci-xe-xe-4928-95fbbe4877e154397-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1776947245 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (0.904s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (0.904s) |
| Dmesg |
<6> [799.703214] [IGT] xe_module_load: executing
<4> [799.703260] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [799.707281] [IGT] xe_module_load: starting subtest load
<5> [800.081634] Setting dangerous option force_probe - tainting kernel
<6> [800.085521] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [800.087511] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [800.087548] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [800.088431] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [800.088440] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [800.088583] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [800.088694] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [800.088811] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [800.092684] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [800.092794] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [800.092797] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [800.092798] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [800.092800] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [800.092934] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [800.093092] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [800.093220] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [800.093560] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [800.093674] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [800.094001] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [800.094123] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [800.094235] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [800.094345] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [800.094664] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [800.094798] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [800.094915] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [800.095027] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [800.095340] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [800.095843] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [800.109967] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [800.110111] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [800.110244] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [800.110363] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [800.110481] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [800.110612] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [800.110726] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [800.110836] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [800.110941] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [800.111053] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [800.111162] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [800.111269] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [800.111374] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [800.111479] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [800.111607] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [800.111719] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [800.111826] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [800.111931] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [800.112040] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [800.112145] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [800.112249] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [800.112364] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [800.112472] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [800.112594] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [800.112705] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [800.112817] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [800.112925] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [800.113030] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [800.113135] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [800.113241] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [800.113595] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [800.113754] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [800.114097] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [800.114271] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [800.114682] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [800.114797] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [800.115110] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [800.115247] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [800.115572] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [800.115707] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [800.115825] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [800.116156] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [800.116267] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [800.116388] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [800.116500] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [800.116829] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [800.117317] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [800.118296] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [800.118663] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [800.118783] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [800.118893] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [800.118995] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [800.119093] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [800.119194] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [800.119294] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [800.119390] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [800.119488] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [800.119582] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [800.119676] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [800.119769] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [800.119866] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [800.119964] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [800.120057] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [800.120147] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [800.120248] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [800.122582] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [800.122775] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [800.122943] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [800.123082] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [800.123238] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [800.123393] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [800.123587] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [800.123738] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [800.123889] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [800.124048] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [800.124207] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [800.124358] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [800.124518] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [800.124579] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [800.124667] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [800.124819] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [800.124939] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [800.125050] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [800.125155] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [800.125286] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [800.125438] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [800.125612] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [800.125765] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [800.125923] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [800.126075] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [800.126224] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [800.126378] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [800.126556] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [800.126712] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [800.126862] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [800.127011] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [800.133708] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [800.133896] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [800.134022] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [800.134638] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [800.135309] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:507:DDI TC1/PHY F]
<7> [800.135967] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:507:DDI TC1/PHY F]
<7> [800.136095] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:507:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [800.136921] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:526:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<6> [800.137529] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [800.137534] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:526:DDI TC2/PHY G]
<7> [800.137858] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:526:DDI TC2/PHY G]
<7> [800.137971] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:526:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [800.138386] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:538:DDI TC3/PHY H]
<7> [800.138501] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:538:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [800.138905] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [800.139040] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC4/PHY I]
<7> [800.139333] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:542:DDI TC4/PHY I]
<7> [800.139449] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:542:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [800.139995] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [800.140145] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: disabled
<7> [800.140499] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] hw state readout: disabled
<7> [800.140647] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] hw state readout: disabled
<7> [800.140984] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled
<7> [800.141083] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A
<7> [800.141181] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A
<7> [800.141476] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A
<7> [800.141586] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A
<7> [800.141680] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A
<7> [800.141975] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A
<7> [800.142069] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] hw state readout: disabled, pipe C
<7> [800.142167] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] hw state readout: disabled, pipe C
<7> [800.142462] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] hw state readout: disabled, pipe C
<7> [800.142568] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] hw state readout: disabled, pipe C
<7> [800.142668] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] hw state readout: disabled, pipe C
<7> [800.142971] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] hw state readout: disabled, pipe C
<7> [800.143065] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] hw state readout: disabled, pipe B
<7> [800.143157] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] hw state readout: disabled, pipe B
<7> [800.143454] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] hw state readout: disabled, pipe B
<7> [800.143557] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] hw state readout: disabled, pipe B
<7> [800.143650] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] hw state readout: disabled, pipe B
<7> [800.143944] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] hw state readout: disabled, pipe B
<7> [800.144034] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D
<7> [800.144128] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D
<7> [800.144425] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D
<7> [800.144533] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D
<7> [800.144635] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D
<7> [800.144941] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D
<7> [800.145032] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [800.145121] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST A] hw state readout: disabled, pipe A
<7> [800.145208] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST B] hw state readout: disabled, pipe B
<7> [800.145296] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST C] hw state readout: disabled, pipe C
<7> [800.145384] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST D] hw state readout: disabled, pipe D
<7> [800.145685] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [800.145798] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST A] hw state readout: disabled, pipe A
<7> [800.145889] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST B] hw state readout: disabled, pipe B
<7> [800.145980] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST C] hw state readout: disabled, pipe C
<7> [800.146067] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:531:DP-MST D] hw state readout: disabled, pipe D
<7> [800.146357] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [800.146447] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [800.146560] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A
<7> [800.146666] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B
<7> [800.146762] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C
<7> [800.146861] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D
<7> [800.146952] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [800.147061] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [800.147164] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [800.147467] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [800.147590] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [800.147693] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [800.147998] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [800.148106] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:DP-1] hw state readout: disabled
<7> [800.148219] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:HDMI-A-1] hw state readout: disabled
<7> [800.148528] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:527:DP-2] hw state readout: disabled
<7> [800.148635] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:535:HDMI-A-2] hw state readout: disabled
<7> [800.148729] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:539:HDMI-A-3] hw state readout: disabled
<7> [800.149031] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-3] hw state readout: disabled
<7> [800.149131] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:551:HDMI-A-4] hw state readout: disabled
<7> [800.149222] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 0 kHz
<7> [800.149311] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz
<7> [800.149398] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz
<7> [800.149488] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz
<7> [800.149584] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz
<7> [800.149680] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz
<7> [800.149771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 0 kHz
<7> [800.149857] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] min_cdclk 0 kHz
<7> [800.149941] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] min_cdclk 0 kHz
<7> [800.150028] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] min_cdclk 0 kHz
<7> [800.150112] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] min_cdclk 0 kHz
<7> [800.150204] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] min_cdclk 0 kHz
<7> [800.150294] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] min_cdclk 0 kHz
<7> [800.150381] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] min_cdclk 0 kHz
<7> [800.150466] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] min_cdclk 0 kHz
<7> [800.150566] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] min_cdclk 0 kHz
<7> [800.150662] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] min_cdclk 0 kHz
<7> [800.150751] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] min_cdclk 0 kHz
<7> [800.150835] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] min_cdclk 0 kHz
<7> [800.150917] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] min_cdclk 0 kHz
<7> [800.151000] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] min_cdclk 0 kHz
<7> [800.151088] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz
<7> [800.151176] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz
<7> [800.151260] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz
<7> [800.151346] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz
<7> [800.151437] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz
<7> [800.151532] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz
<7> [800.151625] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz
<7> [800.151916] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [800.152012] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [800.152104] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [800.152193] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [800.152288] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [800.152407] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [800.152522] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [800.152642] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [800.152973] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [800.153148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [setup_hw_state]
<7> [800.153258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [setup_hw_state]
<7> [800.153363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [setup_hw_state]
<7> [800.153469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state]
<7> [800.153612] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [800.158303] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [800.163458] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065e1cf
<7> [800.163598] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [800.163702] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [800.163794] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [800.163883] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020be
<7> [800.163967] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [800.164051] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [800.164133] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [800.164213] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [800.164294] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [800.164375] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [800.164454] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [800.164548] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [800.164638] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [800.164724] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [800.164855] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [800.176441] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [800.177290] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [800.177564] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [800.177663] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [800.177753] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [800.177840] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [800.177927] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [800.264011] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [800.264014] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [800.264177] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [800.264290] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access
<7> [800.264398] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access
<7> [800.264503] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [800.264599] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [800.264693] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [800.264822] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [800.264941] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [800.265093] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [800.265188] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [800.265286] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [800.265379] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [800.265558] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [800.265646] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [800.265747] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [800.265839] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [800.267210] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [800.267301] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [800.267395] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [800.267492] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [800.267596] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [800.267691] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [800.267781] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [800.267872] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00000100
<7> [800.267967] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [800.268063] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [800.268151] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [800.268238] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [800.268323] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [800.268405] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [800.268492] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [800.268579] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [800.268667] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [800.268749] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [800.268831] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [800.268918] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [800.269003] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [800.269083] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [800.269163] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [800.269242] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [800.269321] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [800.269400] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [800.269479] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [800.269597] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [800.269712] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [800.269806] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [800.269896] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [800.269981] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [800.270063] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [800.270144] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [800.270225] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [800.270308] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [800.270391] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [800.270473] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [800.270574] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [800.270669] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [800.270761] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [800.270849] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [800.270935] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009100
<7> [800.271022] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [800.271347] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [800.271431] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [800.271527] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [800.271617] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [800.271930] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [800.272025] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [800.272115] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [800.272204] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [800.272516] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [800.272611] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [800.272700] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [800.272782] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [800.272867] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [800.272951] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [800.273035] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [800.273357] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [800.273448] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [800.273547] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [800.273655] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [800.273742] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [800.273822] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [800.273902] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [800.274424] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [800.279797] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196b1cf
<7> [800.279899] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [800.279989] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [800.280076] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [800.280157] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [800.280236] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [800.280311] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [800.280386] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [800.280460] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [800.280548] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [800.280628] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [800.280710] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [800.280789] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [800.280867] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [800.280974] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [800.281152] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [800.283093] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [800.285235] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [800.286291] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [800.307117] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [800.317902] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [800.318228] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [800.319571] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [800.319706] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [800.319806] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [800.319899] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [800.319988] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [800.320074] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [800.320157] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [800.320241] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [800.320325] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [800.320411] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [800.323445] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [800.323576] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [800.323677] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [800.326528] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [800.326633] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [800.330522] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [800.331253] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [800.334929] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0236c1cf
<7> [800.335057] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [800.335157] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [800.335250] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [800.335338] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ada
<7> [800.335422] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [800.335517] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [800.335604] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [800.335690] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [800.335774] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [800.335857] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [800.335938] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [800.336015] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [800.336094] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [800.337577] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [800.338048] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [800.338190] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [800.349490] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [800.349945] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [800.350061] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [800.350159] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [800.350254] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [800.350346] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [800.350437] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [800.350544] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [800.350547] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [800.350549] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [800.350551] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [800.350553] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [800.350556] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [800.350558] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [800.350559] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [800.350562] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [800.350767] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [800.350885] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [800.351004] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [800.351110] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [800.351216] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [800.351315] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [800.351413] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [800.351539] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [800.351638] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [800.351736] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [800.351941] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [800.352043] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [800.352146] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [800.352244] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [800.352347] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [800.352449] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [800.352563] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [800.352664] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [800.352769] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [800.352872] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [800.353069] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [800.353165] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [800.353264] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [800.353366] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [800.353471] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [800.353587] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [800.353685] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [800.353781] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [800.353876] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [800.353970] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [800.354166] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [800.354258] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [800.354356] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [800.354461] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [800.354581] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [800.354679] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [800.354775] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [800.354874] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [800.354969] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [800.355064] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [800.356638] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [800.356752] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [800.356861] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [800.356965] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [800.357062] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [800.357159] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [800.357252] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [800.357348] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [800.357450] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [800.357559] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [800.357661] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [800.357761] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [800.357857] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [800.357948] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [800.358039] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [800.358127] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [800.358214] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [800.358301] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [800.358388] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [800.358474] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [800.358584] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [800.358681] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [800.358775] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [800.358867] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [800.358958] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [800.359047] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [800.359153] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [800.359261] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [800.359366] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [800.359465] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [800.359576] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [800.359667] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [800.359758] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [800.359847] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [800.359936] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [800.360026] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [800.360115] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [800.360332] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [800.360439] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [800.360554] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [800.360652] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [800.360745] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [800.360837] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [800.360927] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [800.361019] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [800.361119] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [800.361221] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [800.361315] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [800.361408] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [800.361618] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [800.361714] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [800.361816] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [800.361918] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [800.362014] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [800.362106] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [800.362197] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [800.362288] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [800.362381] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [800.362490] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [800.362590] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [800.362684] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [800.362892] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [800.362987] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [800.363079] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [800.363171] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [800.363261] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [800.363353] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [800.363442] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [800.363543] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [800.363633] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [800.363722] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [800.363810] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [800.363902] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [800.364337] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [800.368305] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036501cf
<7> [800.368415] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [800.368525] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [800.368624] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [800.368715] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046d8
<7> [800.368805] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [800.368891] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [800.368973] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [800.369054] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [800.369133] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [800.369212] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [800.369290] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [800.369369] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [800.369447] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [800.369565] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [800.369680] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [800.370860] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf1000 for xe_guc_buf_cache_init_with_size [xe]
<7> [800.389942] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [800.400773] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [800.401139] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [800.401798] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [800.401905] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [800.403953] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [800.404066] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [800.415486] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [800.415939] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [800.416138] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [800.416322] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [800.416533] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [800.418091] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [800.418241] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [800.418854] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [800.418925] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [800.419376] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [800.419882] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [800.420030] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [800.420783] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008
<7> [800.420985] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108
<7> [800.421295] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208
<7> [800.421463] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308
<7> [800.421604] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8
<7> [800.421750] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 0: start 0x98008
<7> [800.421863] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 1: start 0x98108
<7> [800.421966] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 2: start 0x98208
<7> [800.422070] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 3: start 0x98308
<7> [800.422181] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 4: start 0x983c8
<7> [800.422287] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 0: start 0x52008
<7> [800.422389] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 1: start 0x52108
<7> [800.422503] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 2: start 0x52208
<7> [800.422630] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 3: start 0x52308
<7> [800.422749] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 4: start 0x523c8
<7> [800.422858] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008
<7> [800.422958] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108
<7> [800.423064] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208
<7> [800.423180] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308
<7> [800.423295] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8
<7> [800.423618] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [800.423758] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [800.423898] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [800.424024] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [800.424174] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [fastset]
<7> [800.424299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [fastset]
<7> [800.424423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [fastset]
<7> [800.424554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset]
<7> [800.425357] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [800.425828] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [800.426067] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [800.426348] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe B]
<7> [800.426574] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<7> [800.426753] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D]
<7> [800.427014] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<5> [800.428285] Creating 4 MTD partitions on "xe.nvm.768":
<5> [800.428302] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [800.433076] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:DP-1] adding connector to sysfs
<5> [800.434641] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [800.435870] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [800.438662] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:DP-1] generating connector hotplug event
<7> [800.438769] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:HDMI-A-1] adding connector to sysfs
<7> [800.440011] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:HDMI-A-1] generating connector hotplug event
<7> [800.440171] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:DP-2] adding connector to sysfs
<5> [800.441641] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<7> [800.442092] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [800.444562] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:DP-2] generating connector hotplug event
<7> [800.444629] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:535:HDMI-A-2] adding connector to sysfs
<7> [800.445190] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:535:HDMI-A-2] generating connector hotplug event
<7> [800.445275] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:539:HDMI-A-3] adding connector to sysfs
<6> [800.445286] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [800.445877] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:539:HDMI-A-3] generating connector hotplug event
<7> [800.445936] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs
<7> [800.447401] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [800.449789] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event
<7> [800.449916] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:551:HDMI-A-4] adding connector to sysfs
<7> [800.450826] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:551:HDMI-A-4] generating connector hotplug event
<5> [800.452357] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<6> [800.463534] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [800.463657] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [800.464064] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [800.468847] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [800.469292] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:151:pipe A] not active, skipping
<7> [800.469813] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe B] not active, skipping
<7> [800.470150] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe C] not active, skipping
<7> [800.470395] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping
<7> [800.470689] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [800.471385] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [800.473386] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:508:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.473801] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [800.478105] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:521:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.478356] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [800.482704] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:527:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.482875] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [800.487085] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:535:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.487219] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [800.491342] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:539:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.491449] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [800.495623] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.495749] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [800.499883] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:551:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [800.500000] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [800.500131] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1]
<7> [800.500142] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [800.504488] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1] disconnected
<7> [800.504525] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1]
<7> [800.504529] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [800.508878] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1] disconnected
<7> [800.508884] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2]
<7> [800.508887] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [800.513031] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2] disconnected
<7> [800.513036] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2]
<7> [800.513039] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [800.517380] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2] disconnected
<7> [800.517384] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3]
<7> [800.517387] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [800.521603] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3] disconnected
<7> [800.521608] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [800.521611] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [800.525495] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [800.525775] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [800.525779] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4]
<7> [800.525783] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [800.530038] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4] disconnected
<7> [800.530043] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [800.530049] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-1] enabled? no
<7> [800.530052] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-1] enabled? no
<7> [800.530054] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-2] enabled? no
<7> [800.530057] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-2] enabled? no
<7> [800.530059] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-3] enabled? no
<7> [800.530062] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [800.530064] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-4] enabled? no
<7> [800.530153] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [800.530166] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [800.530214] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [800.530224] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [800.531393] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [800.531365] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [800.531522] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [800.531606] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1]
<7> [800.531613] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [800.531645] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [800.531768] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [800.531886] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [800.531996] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [800.532104] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [800.532210] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [800.532315] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [800.532431] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [800.532559] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [800.532671] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [800.532779] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [800.532887] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [800.533002] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [800.533113] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [800.533220] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [800.533326] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [800.533438] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [800.533568] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [800.533684] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [800.533791] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [800.533912] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [800.534052] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000)
<7> [800.534237] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [800.534385] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [800.534767] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [800.534934] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [800.535120] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [800.535273] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [800.535450] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [800.535630] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [800.535797] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [800.536004] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [800.536229] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1] disconnected
<7> [800.536236] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1]
<7> [800.536240] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [800.540382] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1] disconnected
<7> [800.540389] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2]
<7> [800.540393] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [800.544662] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2] disconnected
<7> [800.544667] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2]
<7> [800.544671] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [800.548824] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2] disconnected
<7> [800.548829] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3]
<7> [800.548832] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [800.552996] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3] disconnected
<7> [800.553001] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [800.553004] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<6> [800.553601] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [800.554052] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [800.554240] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [800.554355] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [800.554774] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [800.554810] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [800.555090] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [800.555267] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [800.557152] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [800.557157] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4]
<7> [800.557160] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [800.561322] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4] disconnected
<7> [800.561328] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [800.561335] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-1] enabled? no
<7> [800.561338] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-1] enabled? no
<7> [800.561340] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-2] enabled? no
<7> [800.561343] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-2] enabled? no
<7> [800.561345] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-3] enabled? no
<7> [800.561348] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [800.561350] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-4] enabled? no
<7> [800.561453] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [800.561466] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [800.561513] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [800.561522] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [800.561546] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [800.561554] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<6> [800.563383] xe 0000:03:00.0: [drm] Pre-production hardware detected.
<7> [800.563436] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [800.568377] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<6> [800.593929] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6> [800.595096] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4
<6> [800.595371] snd_hda_intel 0000:04:00.0: enabling device (0000 -> 0002)
<6> [800.596486] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [800.596829] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [800.596959] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [800.597392] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [800.597879] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [800.598106] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [800.602629] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [800.611402] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [800.611462] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [800.611776] [IGT] xe_module_load: exiting, ret=0
|