Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.35 seconds |
| Igt-Version |
IGT-Version: 2.4-g1aba4b364 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4926-489e26ada57ce96a2-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1776883189 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.351s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.351s) |
| Dmesg |
<6> [780.601594] [IGT] xe_module_load: executing
<4> [780.601642] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [780.612128] [IGT] xe_module_load: starting subtest load
<5> [780.963316] Setting dangerous option force_probe - tainting kernel
<6> [780.966891] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [780.968721] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [780.968757] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [780.969595] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [780.969603] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [780.969731] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [780.969829] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [780.969934] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [780.973390] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [780.973507] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [780.973509] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [780.973511] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [780.973512] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [780.973647] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [780.973811] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [780.973938] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [780.974273] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [780.974384] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [780.974494] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [780.974612] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [780.974738] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [780.974850] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [780.975161] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [780.975291] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [780.975404] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [780.975510] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [780.975824] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [780.976219] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [780.990120] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [780.990235] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [780.990350] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [780.990460] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [780.990575] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [780.990694] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [780.990809] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [780.990923] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [780.991026] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [780.991140] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [780.991246] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [780.991349] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [780.991456] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [780.991569] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [780.991690] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [780.991790] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [780.991888] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [780.991985] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [780.992091] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [780.992198] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [780.992305] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [780.992410] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [780.992510] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [780.992611] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [780.992720] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [780.992818] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [780.992916] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [780.993015] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [780.993112] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [780.993213] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [780.993550] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [780.993708] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [780.994049] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [780.994226] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [780.994615] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [780.994736] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [780.995053] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [780.995185] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [780.995506] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [780.995639] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [780.995764] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [780.996091] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [780.996205] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [780.996326] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [780.996433] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [780.996763] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [780.997244] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [780.997826] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [780.998269] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [780.998815] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [780.998937] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [780.999043] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [780.999143] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [780.999240] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [780.999337] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [780.999432] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [780.999524] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [780.999613] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [780.999723] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [780.999848] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [780.999998] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [781.000140] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [781.000289] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [781.000446] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [781.000575] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [781.000601] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [781.000785] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [781.000912] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [781.001035] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [781.001149] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [781.001255] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [781.001366] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [781.001477] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [781.001588] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [781.001715] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [781.001820] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [781.001921] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [781.002033] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.002142] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [781.002261] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [781.002370] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [781.002475] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [781.002577] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [781.002691] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [781.002793] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [781.002894] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.002997] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [781.003113] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [781.003223] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [781.003332] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.003439] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [781.003556] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [781.003672] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [781.003782] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.003890] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [781.004630] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [781.012709] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [781.012856] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [781.012980] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [781.013212] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [781.013741] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:507:DDI TC1/PHY F]
<6> [781.014298] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [781.014277] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:507:DDI TC1/PHY F]
<7> [781.014409] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:507:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [781.015055] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:526:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [781.015200] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:526:DDI TC2/PHY G]
<7> [781.015514] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:526:DDI TC2/PHY G]
<7> [781.015632] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:526:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [781.016063] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:538:DDI TC3/PHY H]
<7> [781.016171] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:538:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [781.016568] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [781.016708] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC4/PHY I]
<7> [781.017019] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:542:DDI TC4/PHY I]
<7> [781.017127] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:542:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [781.017714] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [781.017882] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: disabled
<7> [781.018239] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] hw state readout: disabled
<7> [781.018376] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] hw state readout: disabled
<7> [781.018717] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled
<7> [781.018823] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A
<7> [781.019140] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A
<7> [781.019448] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A
<7> [781.019558] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A
<7> [781.019667] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A
<7> [781.019975] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A
<7> [781.020066] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] hw state readout: disabled, pipe C
<7> [781.020155] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] hw state readout: disabled, pipe C
<7> [781.020449] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] hw state readout: disabled, pipe C
<7> [781.020539] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] hw state readout: disabled, pipe C
<7> [781.020628] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] hw state readout: disabled, pipe C
<7> [781.020929] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] hw state readout: disabled, pipe C
<7> [781.021027] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] hw state readout: disabled, pipe B
<7> [781.021123] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] hw state readout: disabled, pipe B
<7> [781.021422] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] hw state readout: disabled, pipe B
<7> [781.021511] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] hw state readout: disabled, pipe B
<7> [781.021600] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] hw state readout: disabled, pipe B
<7> [781.021898] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] hw state readout: disabled, pipe B
<7> [781.022003] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D
<7> [781.022107] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D
<7> [781.022410] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D
<7> [781.022511] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D
<7> [781.022608] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D
<7> [781.022919] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D
<7> [781.023022] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [781.023118] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST A] hw state readout: disabled, pipe A
<7> [781.023214] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST B] hw state readout: disabled, pipe B
<7> [781.023307] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST C] hw state readout: disabled, pipe C
<7> [781.023410] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST D] hw state readout: disabled, pipe D
<7> [781.023730] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [781.023831] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST A] hw state readout: disabled, pipe A
<7> [781.023929] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST B] hw state readout: disabled, pipe B
<7> [781.024024] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST C] hw state readout: disabled, pipe C
<7> [781.024119] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:531:DP-MST D] hw state readout: disabled, pipe D
<7> [781.024425] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [781.024523] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [781.024615] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A
<7> [781.024723] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B
<7> [781.024825] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C
<7> [781.024922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D
<7> [781.025019] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [781.025139] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [781.025250] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [781.025559] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [781.025666] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [781.025769] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [781.026072] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [781.026185] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:DP-1] hw state readout: disabled
<7> [781.026518] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:HDMI-A-1] hw state readout: disabled
<7> [781.026628] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:527:DP-2] hw state readout: disabled
<7> [781.026952] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:535:HDMI-A-2] hw state readout: disabled
<7> [781.027057] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:539:HDMI-A-3] hw state readout: disabled
<7> [781.027157] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-3] hw state readout: disabled
<7> [781.027459] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:551:HDMI-A-4] hw state readout: disabled
<7> [781.027553] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 0 kHz
<7> [781.027646] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz
<7> [781.027754] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz
<7> [781.027852] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz
<7> [781.027961] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz
<7> [781.028061] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz
<7> [781.028161] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 0 kHz
<7> [781.028258] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] min_cdclk 0 kHz
<7> [781.028354] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] min_cdclk 0 kHz
<7> [781.028449] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] min_cdclk 0 kHz
<7> [781.028545] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] min_cdclk 0 kHz
<7> [781.028641] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] min_cdclk 0 kHz
<7> [781.028747] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] min_cdclk 0 kHz
<7> [781.028852] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] min_cdclk 0 kHz
<7> [781.028953] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] min_cdclk 0 kHz
<7> [781.029050] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] min_cdclk 0 kHz
<7> [781.029145] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] min_cdclk 0 kHz
<7> [781.029244] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] min_cdclk 0 kHz
<7> [781.029343] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] min_cdclk 0 kHz
<7> [781.029437] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] min_cdclk 0 kHz
<7> [781.029533] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] min_cdclk 0 kHz
<7> [781.029634] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz
<7> [781.029739] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz
<7> [781.029833] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz
<7> [781.029928] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz
<7> [781.030022] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz
<7> [781.030115] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz
<7> [781.030214] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz
<7> [781.030519] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.030631] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.030746] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.030843] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.030937] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [781.031062] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [781.031182] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [781.031291] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [781.031628] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [781.031820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [setup_hw_state]
<7> [781.031938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [setup_hw_state]
<7> [781.032048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [setup_hw_state]
<7> [781.032156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state]
<7> [781.032264] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [781.037161] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [781.042310] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065e1cf
<7> [781.042426] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [781.042515] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [781.042600] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [781.042688] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020be
<7> [781.042765] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [781.042842] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [781.042918] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [781.042992] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [781.043066] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [781.043140] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [781.043213] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [781.043284] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [781.043358] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [781.043437] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [781.043560] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [781.054718] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [781.055551] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [781.055857] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [781.055957] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [781.056050] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [781.056138] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [781.056224] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [781.144439] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [781.144441] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [781.144593] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [781.144708] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access
<7> [781.144819] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access
<7> [781.144923] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [781.145017] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [781.145111] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [781.145252] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [781.145368] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [781.145495] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [781.145574] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [781.145664] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [781.145758] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [781.145905] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [781.145988] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [781.146082] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [781.146167] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [781.147554] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [781.147648] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [781.147754] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [781.147843] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [781.147926] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [781.148007] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [781.148087] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [781.148169] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00000100
<7> [781.148248] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [781.148332] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [781.148412] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [781.148491] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [781.148570] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [781.148651] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [781.148745] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [781.148822] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [781.148899] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [781.148976] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [781.149054] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [781.149130] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [781.149203] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [781.149276] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [781.149354] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [781.149431] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [781.149505] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [781.149578] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [781.149652] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [781.149759] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [781.149849] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [781.149930] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [781.150011] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [781.150089] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [781.150166] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [781.150245] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [781.150324] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [781.150404] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [781.150482] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [781.150564] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [781.150645] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [781.150737] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [781.150819] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [781.150900] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [781.150979] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009100
<7> [781.151056] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [781.151524] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [781.151600] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [781.151679] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [781.151754] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [781.152232] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [781.152314] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [781.152392] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [781.152469] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [781.152772] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [781.152858] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [781.152932] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [781.153013] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [781.153095] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [781.153172] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [781.153248] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [781.153567] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [781.153642] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [781.153735] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [781.153818] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [781.153899] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [781.153976] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [781.154052] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [781.154580] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [781.159738] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196b1cf
<7> [781.159833] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [781.159917] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [781.159995] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [781.160071] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [781.160145] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [781.160219] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [781.160295] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [781.160371] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [781.160444] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [781.160515] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [781.160585] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [781.160655] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [781.160742] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [781.160843] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [781.161006] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [781.163097] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [781.165159] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [781.166191] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [781.186584] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [781.197390] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [781.197805] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [781.199208] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [781.199337] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [781.199425] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [781.199505] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [781.199583] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [781.199657] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [781.199748] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [781.199822] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [781.199897] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [781.199975] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [781.203598] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [781.203728] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [781.203826] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [781.206459] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [781.206561] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [781.211024] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [781.211841] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [781.215533] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0236c1cf
<7> [781.215643] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [781.215774] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [781.215858] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [781.215941] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ada
<7> [781.216020] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [781.216098] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [781.216175] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [781.216253] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [781.216334] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [781.216411] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [781.216488] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [781.216563] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [781.216637] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [781.217861] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [781.218299] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [781.218431] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [781.229667] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [781.230006] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [781.230114] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [781.230208] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [781.230298] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [781.230384] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [781.230472] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [781.230561] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [781.230563] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [781.230564] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [781.230565] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [781.230566] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [781.230567] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [781.230569] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [781.230570] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [781.230573] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [781.230786] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [781.230899] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.231009] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.231118] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.231222] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.231316] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.231407] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.231498] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.231588] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.231708] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.231901] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [781.231990] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.232082] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.232169] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.232260] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.232346] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.232433] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.232521] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.232608] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.232707] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.232895] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [781.232991] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.233088] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.233179] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.233271] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.233358] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.233446] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.233536] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.233622] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.233717] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.233906] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [781.233998] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.234091] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.234180] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.234269] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.234356] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.234445] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.234542] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.234635] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.234733] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.236281] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [781.236398] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [781.236507] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [781.236608] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [781.236710] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [781.236802] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [781.236897] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [781.236995] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [781.237092] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [781.237184] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [781.237271] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [781.237356] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [781.237441] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [781.237528] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [781.237611] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [781.237699] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [781.237784] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [781.237871] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [781.237954] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [781.238035] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [781.238115] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [781.238197] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [781.238283] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [781.238366] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [781.238448] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [781.238528] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [781.238628] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [781.238734] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [781.238826] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [781.238913] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [781.238998] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [781.239085] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [781.239173] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [781.239259] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [781.239343] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [781.239424] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [781.239504] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [781.239708] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [781.239794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [781.239878] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [781.239961] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [781.240049] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [781.240137] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [781.240222] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [781.240306] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [781.240388] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [781.240469] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [781.240550] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [781.240630] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [781.240830] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [781.240922] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [781.241010] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [781.241095] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [781.241177] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [781.241260] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [781.241341] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [781.241422] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [781.241504] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [781.241585] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [781.241676] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [781.241761] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [781.241959] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [781.242043] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [781.242127] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [781.242210] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [781.242292] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [781.242374] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [781.242455] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [781.242535] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [781.242623] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [781.242723] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [781.242813] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [781.242899] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [781.243321] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [781.247341] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036501cf
<7> [781.247442] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [781.247532] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [781.247615] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [781.247705] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046d8
<7> [781.247787] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [781.247869] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [781.247947] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [781.248023] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [781.248096] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [781.248170] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [781.248243] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [781.248317] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [781.248387] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [781.248483] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [781.248592] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [781.249738] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf1000 for xe_guc_buf_cache_init_with_size [xe]
<7> [781.270109] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [781.281224] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [781.281579] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [781.282250] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [781.282348] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [781.284034] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [781.284135] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [781.295666] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [781.296148] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.296356] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.296550] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.296752] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.298453] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [781.298602] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [781.299117] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [781.299188] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [781.299323] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [781.299486] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [781.299648] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [781.300309] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008
<7> [781.300458] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108
<7> [781.300588] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208
<7> [781.300715] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308
<7> [781.300835] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8
<7> [781.300954] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 0: start 0x98008
<7> [781.301069] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 1: start 0x98108
<7> [781.301179] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 2: start 0x98208
<7> [781.301283] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 3: start 0x98308
<7> [781.301383] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 4: start 0x983c8
<7> [781.301482] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 0: start 0x52008
<7> [781.301579] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 1: start 0x52108
<7> [781.301676] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 2: start 0x52208
<7> [781.301795] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 3: start 0x52308
<7> [781.301926] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 4: start 0x523c8
<7> [781.302030] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008
<7> [781.302130] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108
<7> [781.302231] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208
<7> [781.302346] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308
<7> [781.302455] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8
<7> [781.302757] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [781.302916] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [781.303071] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [781.303206] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [781.303360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [fastset]
<7> [781.303479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [fastset]
<7> [781.303593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [fastset]
<7> [781.303716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset]
<7> [781.304490] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [781.304861] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [781.305112] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [781.305152] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [781.305331] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe B]
<7> [781.305504] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<7> [781.305596] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.305687] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D]
<7> [781.305892] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [781.310592] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:DP-1] adding connector to sysfs
<5> [781.310704] Creating 4 MTD partitions on "xe.nvm.768":
<5> [781.310722] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [781.312638] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [781.315910] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:DP-1] generating connector hotplug event
<7> [781.316032] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:HDMI-A-1] adding connector to sysfs
<7> [781.316574] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:HDMI-A-1] generating connector hotplug event
<7> [781.316647] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:DP-2] adding connector to sysfs
<5> [781.317383] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [781.317576] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [781.319598] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:DP-2] generating connector hotplug event
<7> [781.319687] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:535:HDMI-A-2] adding connector to sysfs
<7> [781.320778] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:535:HDMI-A-2] generating connector hotplug event
<7> [781.320909] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:539:HDMI-A-3] adding connector to sysfs
<7> [781.322054] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:539:HDMI-A-3] generating connector hotplug event
<7> [781.322103] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs
<7> [781.322604] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [781.323599] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event
<7> [781.323643] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:551:HDMI-A-4] adding connector to sysfs
<6> [781.323572] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<5> [781.323823] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<7> [781.323922] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:551:HDMI-A-4] generating connector hotplug event
<7> [781.325003] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [781.327308] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [781.330705] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [781.330825] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [781.331190] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [781.335815] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [781.336226] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:151:pipe A] not active, skipping
<7> [781.336349] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe B] not active, skipping
<7> [781.336461] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe C] not active, skipping
<7> [781.336567] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping
<7> [781.336674] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [781.336941] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<5> [781.338338] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [781.340015] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:508:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.340158] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [781.344437] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [781.344427] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:521:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.344579] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [781.348983] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:527:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.349311] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [781.353711] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:535:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.353939] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [781.358236] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:539:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.358457] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [781.362811] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.363014] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [781.367287] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:551:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.367636] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [781.367883] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1]
<7> [781.367902] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [781.372139] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1] disconnected
<7> [781.372196] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1]
<7> [781.372202] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [781.376405] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1] disconnected
<7> [781.376413] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2]
<7> [781.376417] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [781.380558] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2] disconnected
<7> [781.380569] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2]
<7> [781.380576] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [781.384828] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2] disconnected
<7> [781.384839] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3]
<7> [781.384846] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [781.389075] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3] disconnected
<7> [781.389087] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [781.389093] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [781.393433] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [781.393441] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4]
<7> [781.393447] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [781.397895] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4] disconnected
<7> [781.397903] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [781.397915] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-1] enabled? no
<7> [781.397919] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-1] enabled? no
<7> [781.397924] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-2] enabled? no
<7> [781.397928] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-2] enabled? no
<7> [781.397932] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-3] enabled? no
<7> [781.397936] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [781.397940] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-4] enabled? no
<7> [781.398117] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [781.398138] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [781.398361] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [781.398392] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<6> [781.398479] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [781.399672] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [781.399688] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [781.400858] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.402025] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [781.401989] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [781.402375] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [781.402621] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1]
<7> [781.402617] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [781.402633] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [781.402767] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [781.402893] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [781.403019] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [781.403141] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [781.403255] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [781.403366] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [781.403475] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [781.403585] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [781.403704] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [781.403813] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [781.403918] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [781.404022] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [781.404126] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [781.404228] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [781.404343] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [781.404455] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [781.404569] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [781.404682] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<3> [781.404766] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [781.404777] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [781.405047] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [781.406921] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1] disconnected
<7> [781.406932] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1]
<7> [781.406937] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [781.410547] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [781.410556] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [781.410690] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [781.410819] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000)
<7> [781.411024] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [781.411213] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [781.411444] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [781.411654] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [781.411893] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [781.412100] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [781.412358] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1] disconnected
<7> [781.412367] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2]
<7> [781.412373] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [781.416645] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2] disconnected
<7> [781.416650] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2]
<7> [781.416654] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [781.420921] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2] disconnected
<7> [781.420925] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3]
<7> [781.420929] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [781.425183] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3] disconnected
<7> [781.425188] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [781.425192] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [781.429374] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [781.429378] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4]
<7> [781.429382] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<6> [781.429930] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [781.430375] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [781.430563] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [781.430679] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [781.431088] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [781.431123] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [781.431400] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [781.431591] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [781.433527] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4] disconnected
<7> [781.433532] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [781.433538] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-1] enabled? no
<7> [781.433541] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-1] enabled? no
<7> [781.433544] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-2] enabled? no
<7> [781.433547] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-2] enabled? no
<7> [781.433549] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-3] enabled? no
<7> [781.433552] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [781.433554] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-4] enabled? no
<7> [781.433725] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [781.433744] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [781.433802] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [781.433842] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [781.433888] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [781.435539] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.441596] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [781.442082] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.443051] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [781.443579] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<7> [781.443627] xe 0000:0a:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [781.444286] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [781.444296] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [781.444413] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [781.444512] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [781.444616] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<7> [781.445981] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<6> [781.447890] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [781.448031] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [781.448033] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [781.448035] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [781.448036] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [781.448186] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [781.448365] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [781.448494] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [781.448823] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [781.448935] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [781.449129] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [781.449254] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [781.449367] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [781.449476] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [781.449786] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [781.449927] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [781.450045] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [781.450158] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [781.450472] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [781.450913] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [781.462707] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [781.462917] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [781.463089] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [781.463246] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [781.463399] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [781.463551] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [781.463720] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [781.463874] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [781.464022] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [781.464300] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [781.464515] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [781.464724] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [781.464922] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [781.465117] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [781.465312] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [781.465504] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [781.465865] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [781.466001] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [781.466114] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [781.466221] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [781.466328] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [781.466432] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [781.466532] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [781.466630] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [781.467070] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [781.467206] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [781.467339] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [781.467483] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [781.467608] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [781.467738] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [781.467853] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [781.467865] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [781.467956] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [781.467979] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [781.468054] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [781.468084] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [781.468167] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [781.468187] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [781.468269] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [781.468287] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [781.468380] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [781.468394] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [781.468490] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [781.468497] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [781.468594] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [781.468599] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [781.468712] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [781.468726] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [781.468826] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [781.468835] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [781.468928] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [781.468937] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [781.469034] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [781.469039] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [781.469144] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [781.469254] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [781.469360] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [781.469475] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [781.469577] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [781.469636] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.469683] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [781.469783] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [781.469882] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [781.469989] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [781.470096] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [781.470196] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [781.470304] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [781.470636] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [781.470787] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [781.471125] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [781.471275] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [781.471714] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [781.471833] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [781.472140] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [781.472287] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [781.472610] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [781.472935] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [781.473040] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [781.473162] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [781.473264] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [781.473583] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [781.473700] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [781.473904] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [781.474692] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [781.475096] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [781.475446] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [781.475574] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [781.476312] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<6> [781.476542] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<7> [781.476500] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [781.476621] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [781.476683] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [781.476779] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [781.476857] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [781.476963] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [781.477028] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [781.477148] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [781.477228] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [781.477303] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [781.477417] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [781.477428] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [781.477526] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [781.477633] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [781.477627] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [781.477750] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [781.477763] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [781.477864] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [781.477874] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [781.477973] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [781.477976] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.478072] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [781.478081] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [781.478166] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [781.478193] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [781.478257] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [781.478304] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [781.478347] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [781.478414] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [781.478436] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [781.478519] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [781.478525] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [781.478624] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [781.478735] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<6> [781.478889] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<7> [781.478839] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.478945] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [781.479052] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [781.479153] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [781.479254] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.479352] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [781.479454] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [781.479551] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [781.479655] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [781.479774] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [781.479947] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<6> [781.481115] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [781.488014] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [781.490132] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [781.498199] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [781.498353] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [781.498475] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [781.498846] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [781.499263] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:507:DDI TC1/PHY F]
<7> [781.500116] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:507:DDI TC1/PHY F]
<7> [781.500293] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:507:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [781.500914] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:526:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [781.501378] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:526:DDI TC2/PHY G]
<7> [781.501929] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:526:DDI TC2/PHY G]
<7> [781.502119] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:526:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [781.502657] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:538:DDI TC3/PHY H]
<7> [781.502848] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:538:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [781.503377] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [781.503605] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC4/PHY I]
<7> [781.504024] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:542:DDI TC4/PHY I]
<7> [781.504158] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:542:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [781.504633] xe 0000:0a:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [781.504819] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: disabled
<7> [781.505177] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] hw state readout: disabled
<7> [781.505347] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] hw state readout: disabled
<7> [781.505704] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled
<7> [781.505819] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A
<7> [781.506118] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A
<7> [781.506225] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A
<7> [781.506329] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A
<7> [781.506626] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A
<7> [781.506848] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A
<7> [781.507147] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] hw state readout: disabled, pipe C
<7> [781.507256] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] hw state readout: disabled, pipe C
<7> [781.507361] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] hw state readout: disabled, pipe C
<7> [781.507659] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] hw state readout: disabled, pipe C
<7> [781.508465] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] hw state readout: disabled, pipe C
<7> [781.508573] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] hw state readout: disabled, pipe C
<7> [781.508757] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] hw state readout: disabled, pipe B
<7> [781.509086] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] hw state readout: disabled, pipe B
<7> [781.509196] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] hw state readout: disabled, pipe B
<7> [781.509302] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] hw state readout: disabled, pipe B
<7> [781.509598] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] hw state readout: disabled, pipe B
<7> [781.509710] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] hw state readout: disabled, pipe B
<7> [781.509823] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D
<7> [781.510127] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D
<7> [781.510236] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D
<7> [781.510345] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D
<7> [781.510643] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D
<7> [781.510772] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D
<7> [781.511093] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [781.511196] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST A] hw state readout: disabled, pipe A
<7> [781.511297] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST B] hw state readout: disabled, pipe B
<7> [781.511398] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST C] hw state readout: disabled, pipe C
<7> [781.511497] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST D] hw state readout: disabled, pipe D
<7> [781.511808] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [781.511910] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST A] hw state readout: disabled, pipe A
<7> [781.512009] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST B] hw state readout: disabled, pipe B
<7> [781.512107] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST C] hw state readout: disabled, pipe C
<7> [781.512205] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:531:DP-MST D] hw state readout: disabled, pipe D
<7> [781.512504] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [781.512613] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [781.512721] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A
<7> [781.512818] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B
<7> [781.512914] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C
<7> [781.513010] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D
<7> [781.513105] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [781.513226] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [781.513343] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [781.513653] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [781.513784] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [781.514101] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [781.514216] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [781.514404] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:DP-4] hw state readout: disabled
<7> [781.514724] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:HDMI-A-5] hw state readout: disabled
<7> [781.514840] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:527:DP-5] hw state readout: disabled
<7> [781.515165] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:535:HDMI-A-6] hw state readout: disabled
<7> [781.515470] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:539:HDMI-A-7] hw state readout: disabled
<7> [781.515576] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-6] hw state readout: disabled
<7> [781.515973] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:551:HDMI-A-8] hw state readout: disabled
<7> [781.516069] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 0 kHz
<7> [781.516162] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz
<7> [781.516256] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz
<7> [781.516348] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz
<7> [781.516440] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz
<7> [781.516531] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz
<7> [781.516636] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 0 kHz
<7> [781.516768] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] min_cdclk 0 kHz
<7> [781.516874] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] min_cdclk 0 kHz
<7> [781.516973] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] min_cdclk 0 kHz
<7> [781.517069] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] min_cdclk 0 kHz
<7> [781.517172] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] min_cdclk 0 kHz
<7> [781.517271] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] min_cdclk 0 kHz
<7> [781.517367] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] min_cdclk 0 kHz
<7> [781.517461] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] min_cdclk 0 kHz
<7> [781.517557] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] min_cdclk 0 kHz
<7> [781.517651] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] min_cdclk 0 kHz
<7> [781.517760] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] min_cdclk 0 kHz
<7> [781.517853] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] min_cdclk 0 kHz
<7> [781.517947] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] min_cdclk 0 kHz
<7> [781.518040] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] min_cdclk 0 kHz
<7> [781.518133] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz
<7> [781.518231] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz
<7> [781.518331] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz
<7> [781.518429] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz
<7> [781.518522] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz
<7> [781.518617] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz
<7> [781.518720] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz
<7> [781.519019] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.519132] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.519236] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.519333] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [781.519430] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [781.519553] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [781.519677] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [781.519793] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [781.520118] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [781.520282] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [setup_hw_state]
<7> [781.520397] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [setup_hw_state]
<7> [781.520508] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [setup_hw_state]
<7> [781.520613] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state]
<7> [781.520728] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [781.523887] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [781.529155] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065e1cf
<7> [781.529274] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [781.529362] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [781.529446] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [781.529527] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020be
<7> [781.529608] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [781.529702] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [781.529784] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [781.529862] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [781.529938] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [781.530014] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [781.530087] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [781.530162] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [781.530235] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [781.530309] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [781.530441] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [781.541684] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [781.542467] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [781.542600] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [781.542702] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [781.542786] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [781.542871] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [781.542953] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [781.631086] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [781.631090] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [781.631222] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [781.631334] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access
<7> [781.631435] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access
<7> [781.631532] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [781.631625] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [781.631725] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [781.631859] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [781.631987] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [781.632118] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [781.632198] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [781.632283] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [781.632368] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [781.632511] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [781.632597] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [781.632688] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [781.632778] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [781.634202] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [781.634308] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [781.634411] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [781.634507] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [781.634600] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [781.634695] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [781.634796] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [781.634893] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00000100
<7> [781.634988] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [781.635074] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [781.635157] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [781.635250] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [781.635338] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [781.635423] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [781.635505] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [781.635587] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [781.635679] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [781.635772] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [781.635855] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [781.635935] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [781.636014] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [781.636093] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [781.636171] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [781.636251] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [781.636330] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [781.636409] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [781.636492] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [781.636583] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [781.636675] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [781.636763] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [781.636846] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [781.636925] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [781.637004] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [781.637086] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [781.637170] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [781.637253] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [781.637339] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [781.637424] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [781.637506] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [781.637589] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [781.637681] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [781.637776] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [781.637868] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009100
<7> [781.637951] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [781.638313] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [781.638402] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [781.638488] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [781.638567] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [781.638926] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [781.639015] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [781.639097] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [781.639175] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [781.639516] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [781.639601] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [781.639692] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [781.639777] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [781.639856] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [781.639938] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [781.640020] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [781.640382] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [781.640468] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [781.640553] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [781.640643] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [781.640744] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [781.640828] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [781.640906] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [781.641465] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [781.648069] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196b1cf
<7> [781.648164] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [781.648247] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [781.648327] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [781.648407] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [781.648483] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [781.648558] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [781.648630] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [781.648718] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [781.648796] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [781.648865] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [781.648932] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [781.648999] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [781.649066] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [781.649160] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [781.649264] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [781.651319] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [781.653025] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [781.654798] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [781.676821] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [781.687684] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [781.688114] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [781.689200] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [781.689307] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [781.689401] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [781.689488] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [781.689577] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [781.689672] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [781.689756] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [781.689836] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [781.689918] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [781.690003] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [781.692975] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [781.693086] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [781.693185] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [781.695935] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [781.696039] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [781.700228] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [781.701588] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [781.705277] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0236c1cf
<7> [781.705387] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [781.705479] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [781.705567] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [781.705652] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ada
<7> [781.705752] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [781.705837] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [781.705921] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [781.706003] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [781.706082] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [781.706160] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [781.706238] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [781.706313] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [781.706387] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [781.707040] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [781.707469] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [781.707607] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [781.718679] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [781.719179] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [781.719297] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [781.719392] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [781.719486] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [781.719575] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [781.719660] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [781.719769] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [781.719771] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [781.719772] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [781.719773] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [781.719775] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [781.719776] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [781.719777] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [781.719779] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [781.719793] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [781.719996] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [781.720104] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.720216] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.720323] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.720427] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.720524] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.720618] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.720722] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.720813] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.720906] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.721109] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [781.721206] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.721302] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.721394] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.721487] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.721576] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.721671] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.721762] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.721849] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.721940] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.722132] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [781.722228] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.722322] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.722411] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.722505] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.722593] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.722697] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.722787] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.722874] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.722967] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.723157] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [781.723245] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [781.723337] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [781.723432] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [781.723529] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [781.723620] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [781.723718] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [781.723810] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [781.723906] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [781.724001] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [781.725226] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [781.725333] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [781.725437] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [781.725534] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [781.725631] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [781.725739] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [781.725836] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [781.725930] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [781.726024] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [781.726115] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [781.726205] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [781.726292] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [781.726374] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [781.726457] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [781.726538] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [781.726619] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [781.726707] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [781.726786] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [781.726864] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [781.726943] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [781.727020] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [781.727103] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [781.727185] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [781.727265] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [781.727346] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [781.727425] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [781.727525] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [781.727621] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [781.727719] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [781.727807] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [781.727893] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [781.727977] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [781.728066] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [781.728155] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [781.728239] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [781.728322] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [781.728403] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [781.728661] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [781.728763] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [781.728858] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [781.728949] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [781.729035] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [781.729119] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [781.729201] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [781.729284] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [781.729366] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [781.729447] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [781.729528] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [781.729618] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [781.729883] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [781.729974] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [781.730063] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [781.730150] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [781.730235] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [781.730326] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [781.730418] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [781.730506] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [781.730591] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [781.730682] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [781.730768] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [781.730852] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [781.731105] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [781.731191] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [781.731275] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [781.731359] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [781.731442] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [781.731533] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [781.731624] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [781.731722] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [781.731808] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [781.731890] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [781.731975] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [781.732057] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [781.732530] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [781.738419] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036501cf
<7> [781.738519] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [781.738607] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [781.738699] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [781.738781] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046d8
<7> [781.738863] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [781.738941] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [781.739017] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [781.739092] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [781.739168] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [781.739242] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [781.739316] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [781.739390] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [781.739467] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [781.739567] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [781.739678] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [781.741030] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf1000 for xe_guc_buf_cache_init_with_size [xe]
<7> [781.762521] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [781.773398] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [781.773827] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [781.774537] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [781.774640] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [781.776542] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [781.776645] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [781.789678] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [781.790172] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.790372] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.790557] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [781.790757] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<5> [781.797905] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [781.797929] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [781.807109] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [781.815584] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [781.819851] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [781.825244] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.827163] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.827186] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [781.827316] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [781.827556] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [781.827613] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [781.827755] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [781.827849] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [781.827936] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [781.828159] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008
<7> [781.828292] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108
<7> [781.828407] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208
<7> [781.828516] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308
<7> [781.828623] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8
<7> [781.828746] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 0: start 0x98008
<7> [781.828852] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 1: start 0x98108
<7> [781.828950] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 2: start 0x98208
<7> [781.829047] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 3: start 0x98308
<7> [781.829145] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 4: start 0x983c8
<7> [781.829251] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 0: start 0x52008
<7> [781.829353] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 1: start 0x52108
<7> [781.829451] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 2: start 0x52208
<7> [781.829548] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 3: start 0x52308
<7> [781.829671] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 4: start 0x523c8
<7> [781.829779] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008
<7> [781.829879] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108
<7> [781.829985] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208
<7> [781.830092] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308
<7> [781.830321] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8
<7> [781.830719] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [781.830864] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [781.830993] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.830994] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [781.831115] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [781.831259] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [fastset]
<7> [781.831384] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [fastset]
<7> [781.831497] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [fastset]
<7> [781.831616] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset]
<7> [781.832253] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [781.832454] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [781.832704] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [781.833018] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe B]
<7> [781.833327] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<7> [781.833533] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D]
<7> [781.833759] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<6> [781.834281] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [781.834802] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.836436] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:DP-4] adding connector to sysfs
<7> [781.837267] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [781.838673] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:DP-4] generating connector hotplug event
<7> [781.838734] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:HDMI-A-5] adding connector to sysfs
<7> [781.839158] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:HDMI-A-5] generating connector hotplug event
<7> [781.839206] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:DP-5] adding connector to sysfs
<7> [781.839925] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [781.840799] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:DP-5] generating connector hotplug event
<7> [781.840846] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:535:HDMI-A-6] adding connector to sysfs
<7> [781.841184] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:535:HDMI-A-6] generating connector hotplug event
<7> [781.841228] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:539:HDMI-A-7] adding connector to sysfs
<7> [781.841559] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:539:HDMI-A-7] generating connector hotplug event
<7> [781.841597] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-6] adding connector to sysfs
<7> [781.842090] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [781.842864] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-6] generating connector hotplug event
<7> [781.842905] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:551:HDMI-A-8] adding connector to sysfs
<7> [781.843153] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:551:HDMI-A-8] generating connector hotplug event
<6> [781.843181] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [781.843271] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [781.843400] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [781.844381] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:151:pipe A] not active, skipping
<7> [781.844495] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe B] not active, skipping
<7> [781.844600] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe C] not active, skipping
<7> [781.844786] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [781.845258] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping
<7> [781.845370] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [781.845575] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [781.849034] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:508:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.849163] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<7> [781.853406] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:521:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.853517] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [781.857675] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:527:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.857788] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [781.862011] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:535:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.862130] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
<7> [781.866268] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:539:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.866380] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-6]
<7> [781.870620] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:543:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.870743] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-8]
<7> [781.874971] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:551:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [781.875241] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [781.875506] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4]
<7> [781.875512] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [781.879673] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4] disconnected
<7> [781.879680] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5]
<7> [781.879684] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<7> [781.883830] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5] disconnected
<7> [781.883835] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5]
<7> [781.883838] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [781.888081] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5] disconnected
<7> [781.888085] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6]
<7> [781.888088] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [781.892298] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6] disconnected
<7> [781.892302] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7]
<7> [781.892305] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
<7> [781.896463] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7] disconnected
<7> [781.896468] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6]
<7> [781.896472] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-6]
<7> [781.900700] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6] disconnected
<7> [781.900704] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8]
<7> [781.900707] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-8]
<7> [781.904945] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8] disconnected
<7> [781.904948] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [781.904952] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-4] enabled? no
<7> [781.904955] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-5] enabled? no
<7> [781.904957] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-5] enabled? no
<7> [781.904960] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-6] enabled? no
<7> [781.904962] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-7] enabled? no
<7> [781.904965] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-6] enabled? no
<7> [781.904967] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-8] enabled? no
<7> [781.904987] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [781.904994] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [781.905031] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [781.905037] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [781.905973] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [781.906107] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [781.906222] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [781.906332] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [781.906441] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [781.906548] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [781.906654] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [781.906897] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [781.907103] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4]
<7> [781.907110] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [781.907630] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [781.907974] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [781.908098] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [781.908209] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [781.908315] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [781.908422] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [781.908526] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [781.908630] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [781.908947] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [781.909059] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [781.909161] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [781.909261] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [781.909368] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [781.909478] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [781.909586] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [781.911287] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4] disconnected
<7> [781.911294] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5]
<7> [781.911297] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<7> [781.915450] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5] disconnected
<7> [781.915455] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5]
<7> [781.915459] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [781.919599] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5] disconnected
<7> [781.919604] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6]
<7> [781.919607] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [781.923858] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6] disconnected
<7> [781.923862] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7]
<7> [781.923866] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
<6> [781.927197] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [781.927888] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [781.928034] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7] disconnected
<7> [781.928038] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6]
<7> [781.928042] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-6]
<7> [781.928068] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [781.928181] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [781.928738] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [781.928715] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [781.928785] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [781.929058] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [781.929265] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [781.932275] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6] disconnected
<7> [781.932283] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8]
<7> [781.932289] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-8]
<7> [781.932562] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [781.935721] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [781.937159] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [781.937413] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [781.937625] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [781.937879] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [781.938161] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [781.938463] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [781.938763] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [781.939065] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [781.939545] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [781.939737] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [781.939725] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [781.939907] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [781.940183] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8] disconnected
<7> [781.940190] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [781.940197] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-4] enabled? no
<7> [781.940200] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-5] enabled? no
<7> [781.940203] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-5] enabled? no
<7> [781.940205] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-6] enabled? no
<7> [781.940208] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-7] enabled? no
<7> [781.940210] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-6] enabled? no
<7> [781.940213] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-8] enabled? no
<7> [781.940305] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [781.940317] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [781.940458] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [781.940467] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<6> [781.940430] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [781.940498] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [781.940505] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [781.940621] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [781.940750] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [781.941132] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [781.941636] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [781.941908] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [781.946790] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [781.963169] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [781.963228] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [781.963414] [IGT] xe_module_load: exiting, ret=0
<7> [781.971399] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
|