igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b on shard-lnl@IGT

Detail	Value
Duration	3.00 seconds
Hostname	shard-lnl-8
Igt-Version	IGT-Version: 2.4-g9b95600c4 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4912-7f72587254d9c0142-debug+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (3.001s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (3.001s)
Dmesg	<6> [399.788815] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [399.792732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.794520] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [399.794927] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [399.795249] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [399.795575] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [399.795912] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B] <7> [399.796287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [399.796581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [399.796869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [399.797141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [399.797393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [399.797642] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [399.797883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [399.798113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [399.798330] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [399.798570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [399.798772] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [399.799084] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [399.799274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [399.799461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [399.799637] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [399.799810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [399.800044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [399.800225] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [399.800384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [399.800558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [399.800709] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [399.800863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [399.801013] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [399.801155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [399.801294] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [399.801428] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [399.801562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [399.801691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [399.801821] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [399.801975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [399.802101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [399.802238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [399.802362] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [399.802483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [399.802604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [399.802721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [399.802842] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [399.802962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [399.803088] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [399.803213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [399.803322] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [399.803426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [399.803527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [399.803628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [399.803737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [399.803843] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [399.803885] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [399.803943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [399.804040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [399.804047] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [399.804137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [399.804177] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [399.804226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [399.804313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [399.804401] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [399.804490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [399.804577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [399.804664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [399.804749] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [399.804831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [399.804961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [399.805045] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [399.805126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [399.805204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [399.805280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [399.805356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [399.805435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [399.805518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [399.805593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [399.805664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [399.805735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [399.805806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [399.805892] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [399.805972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [399.806050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [399.806127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [399.806199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [399.806269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [399.806340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [399.806410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [399.806481] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset <7> [399.806555] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [399.806645] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.806731] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [399.806793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [399.806865] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [399.806931] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.806992] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [399.807052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.807111] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.807167] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.807220] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.807288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [399.807374] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [399.807457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [399.807539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.807621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.807703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [399.807803] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz <7> [399.807908] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz <7> [399.808031] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz <7> [399.808161] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0 <7> [399.808248] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0 <7> [399.808334] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.808394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset] <7> [399.808477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [399.808558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [399.808637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [399.808716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [399.808801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [399.808904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [399.809001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset] <7> [399.809091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [399.809173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [399.809251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [399.809327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [399.809405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [399.809481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [399.809558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [399.809634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [399.809711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [399.809788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [399.809871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [399.809955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [399.810037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [399.810120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [399.810197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [399.810274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [399.810349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [399.810424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [399.810501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [399.810577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [399.810654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [399.810731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [399.810808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [399.810896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [399.810987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [399.811080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [399.811167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [399.811247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [399.811326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [399.811399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0 <7> [399.811472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [399.811545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [399.811618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [399.811690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [399.811762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [399.811837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [399.811922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [399.812017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [399.812111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [399.812190] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [399.812262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [399.812333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [399.812405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [399.812476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [399.812547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [399.812618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [399.812690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [399.812766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [399.812858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [399.812947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [399.813041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [399.813119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [399.813192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [399.813265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [399.813337] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [399.813408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [399.813479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [399.813551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [399.813623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [399.813696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [399.813767] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0 <7> [399.813847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no <7> [399.813929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no <7> [399.814012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no <7> [399.814093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no <7> [399.814172] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no <7> [399.815623] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [399.815721] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [399.815867] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [399.816010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [399.816183] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [399.816334] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [399.816419] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [400.024083] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7> [400.024529] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [400.038161] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7> [400.038456] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7> [400.038753] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [400.091323] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [400.091644] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [400.099847] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [400.100237] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [400.100295] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [400.101700] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [400.102139] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [400.102547] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [400.102814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [400.103051] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [400.103297] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [400.103518] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [400.103734] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [400.104003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [400.104234] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [400.104461] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [400.104725] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [400.104969] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [400.105176] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [400.105380] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [400.105625] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1] <7> [400.105849] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2] <7> [400.106097] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3] <7> [400.106369] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes) <7> [400.106609] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [400.107819] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B] <7> [400.108081] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [400.110375] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7> [400.110574] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7> [400.126193] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [400.126511] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [400.126826] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [400.127199] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [400.608169] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [400.649077] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [400.649464] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7> [400.649870] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [400.686406] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [400.686742] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [400.687023] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [400.687617] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [400.861065] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [400.861414] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7> [400.861750] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [400.863673] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [400.865140] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [400.865833] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [400.866909] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [400.868252] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [400.869311] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7> [400.869703] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [400.871148] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [400.871518] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [400.872411] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [400.872975] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [400.873342] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [400.873771] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518 <7> [400.889805] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [400.890162] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [400.890560] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [400.890901] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.892313] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [400.892575] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7> [400.896064] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [400.896366] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [400.896456] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [400.896526] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.896843] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.897078] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.897302] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.897525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.897801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.898062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.898402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.898764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.899075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.899382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.899673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.900477] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.907718] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.907933] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [400.908228] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.908442] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.908666] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.908852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.909063] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.909292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.909541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.909806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.910029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.910248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.910453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.910741] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz <7> [400.910937] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [400.923055] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.924673] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.924742] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [400.924788] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.925087] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.925339] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.925577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.925890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.926097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.926317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.926589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.926853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.927077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.927298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.927504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.928027] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.940735] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [400.940920] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [400.941222] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.941459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.941722] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.941935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.942170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.942405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.942718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.943019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.943332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.943711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.944069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.944371] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [400.956379] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.957934] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [400.958000] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [400.958041] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.958353] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.958746] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.958978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.959170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.959364] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.959566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.959824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.960056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.960266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.960481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.960685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.961168] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.975034] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.975223] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [400.975513] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.975773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.975992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.976203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [400.976409] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [400.976712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [400.977015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [400.977308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [400.977597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.977979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.978252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [400.978621] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz <7> [400.978922] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [400.989715] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.991193] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.991260] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [400.991303] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.991612] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.991913] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.992106] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.992286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.992462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.992662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.992938] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.993172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.993396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.993615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.993859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.994322] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.013596] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.013779] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.014003] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.014186] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.014336] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.014477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.014616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.014823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.015022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [401.015208] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [401.015384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.015564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.015775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [401.015994] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.023018] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.024459] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.024528] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.024572] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.024898] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.025123] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.025284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.025436] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.025586] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.025789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.025995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.026197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.026390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.026578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.026780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.027225] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.045710] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.045915] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.046178] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [401.046490] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [401.046742] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [401.046930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.047113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.047292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.047500] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.047733] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.047950] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.048127] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.048301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.048493] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [401.048848] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.049046] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [401.049236] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [401.049393] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [401.049546] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.049734] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.049878] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.050019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.050151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.050281] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.050410] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.050533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.050684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [401.050889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [401.051086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [401.051273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [401.051451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [401.051659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [401.051867] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.056464] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.057637] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.057670] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.057696] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.057812] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [401.057899] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [401.057973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.058044] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.058163] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.058351] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.058528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.058778] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.058952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.059084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.059160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.059263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.059363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.059458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.059551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.059648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.059930] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.079639] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.079776] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.079963] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [401.080161] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [401.080315] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [401.080462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.080624] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.080775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.080920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.081081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.081213] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.081353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.081506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.081699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [401.081961] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.082097] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [401.082241] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [401.082357] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [401.082471] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.082579] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.082723] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.082843] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.082976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.083094] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.083204] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.083324] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.083429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [401.083640] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.083749] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [401.083866] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [401.083960] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [401.084050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.084138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.084233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.084335] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.084431] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.084516] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.084602] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.084721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.084810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [401.084949] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [401.085086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [401.085216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [401.085343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [401.085469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [401.085630] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.106337] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.107577] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.107682] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.107721] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.107878] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [401.108002] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [401.108161] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.108362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.108557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.108813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.109010] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.109139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.109218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.109297] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.109387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.109508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.109631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.109746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.109859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.109972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.110244] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.134544] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.134739] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.135020] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.135223] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.135400] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.135620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.135788] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.135975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.136210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.136433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.136654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.136864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.137103] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.137340] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.156349] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.158154] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.158246] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.158305] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.158680] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.159007] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.159259] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.159512] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.159819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.160109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.160512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.160923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.161233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.161566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.161906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.162541] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.186919] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.187092] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.187343] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.187561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.187802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.187964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.188116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.188311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.188535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.188757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.188953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.189137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.189309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.189524] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.191635] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.192276] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.192443] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.192663] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.192795] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.206344] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.208038] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.208126] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.208182] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.208529] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.208873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.209130] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.209317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.209534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.209788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.210051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.210308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.210550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.210875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.211103] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.211644] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.236353] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.236552] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.236881] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.237119] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.237296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.237464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.237646] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.237837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.238071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.238286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.238503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.238725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.238912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.239142] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.241616] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.242142] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.242307] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.242453] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.242576] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.256336] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.258025] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.258108] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.258160] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.258480] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.258794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.259023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.259227] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.259448] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.259723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.260002] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.260263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.260519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.260808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.261040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.261542] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.290609] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.290830] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.290986] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.294198] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.294292] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [401.294436] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.294519] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.294606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.294692] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [401.294777] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [401.294875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [401.294983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [401.295077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [401.295166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.295254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.295341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [401.295459] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [401.299925] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.300029] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.306322] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.307655] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.307726] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [401.307769] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.308023] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.308116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.308193] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.308269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.308341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.308424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.308543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.308684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.308798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.308905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.309004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.309240] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.323933] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [401.324148] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.324390] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.324612] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.324772] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.324926] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.325071] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.325232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.325436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [401.325644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [401.325832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.326017] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.326191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [401.326401] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.339643] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.341087] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [401.341164] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [401.341213] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.341491] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.341773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.342009] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.342180] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.342354] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.342526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.342789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.343021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.343249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.343522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.343787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.344384] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.357433] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.357669] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.357970] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.358240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.358460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.358712] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.358918] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.359156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.359470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.359798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.360067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.360390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.360672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.360974] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.372969] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.374497] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.374599] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.374648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.374924] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.375144] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.375353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.375598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.375814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.376031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.376307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.376576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.376828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.377118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.377353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.377910] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.390764] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [401.390974] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.391242] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.391458] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.391708] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.391911] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.392147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.392388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.392752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.393039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.393340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.393628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.393905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.394239] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.406307] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.407841] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [401.407899] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [401.407937] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.408183] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.408427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.408663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.408882] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.409093] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.409277] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.409508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.409768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.409979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.410221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.410426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.410941] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.424813] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.424992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.425290] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.425530] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.425820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.426038] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [401.426249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [401.426487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [401.426947] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.427210] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.427409] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.427616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.427794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [401.427969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [401.428186] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [401.428458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [401.428765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [401.429083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.429322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.429560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [401.429843] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.439608] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.440862] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.440908] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.440939] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.441185] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.441389] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.441613] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.441803] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.442017] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.442141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.442290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.442436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.442597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.442735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.442865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.443191] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.462331] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.462450] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.462652] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.462788] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.462907] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.463019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.463139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.463282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.463443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [401.463604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [401.463746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.463885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.464020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [401.464199] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.472959] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.474502] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.474601] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.474648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.474926] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.475149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.475356] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.475600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.475816] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.476059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.476298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.476517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.476766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.476977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.477207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.477686] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.495864] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.496050] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.496312] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [401.496628] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [401.496839] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [401.497040] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.497239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.497428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.497717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.497905] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.498095] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.498262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.498426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.498643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [401.498890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [401.499147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [401.499369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [401.499645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [401.499864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [401.500117] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.506278] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.507490] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.507522] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.507582] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.507710] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [401.507809] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [401.507903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.507992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.508083] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.508209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.508340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.508459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.508599] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.508709] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.508830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.508996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.509120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.509238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.509351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.509460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.509764] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.532410] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.532616] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.532880] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [401.533206] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [401.533416] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [401.533649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.533836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.534015] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.534224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.534406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.534605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.534761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.534915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.535096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [401.535325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [401.535563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [401.535777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [401.535993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [401.536228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [401.536477] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.556281] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.557844] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.557914] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.557971] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.558250] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [401.558522] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [401.558795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.559019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.559237] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.559459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.559724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.559927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.560148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.560334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.560565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.560863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.561145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.561412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.561715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.561962] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.562546] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.584134] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.584297] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.584575] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.584774] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.584965] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.585146] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.585312] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.585533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.585763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.585987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.586193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.586396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.586608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.586843] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.606282] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.607939] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.608022] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.608076] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.608393] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.608749] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.608991] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.609218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.609470] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.609762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.610060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.610353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.610648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.610912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.611221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.611780] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.635840] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.636018] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.636255] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.636431] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.636638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.636793] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.636941] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.637111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.637332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.637540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.637732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.637915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.638092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.638298] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.640545] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.641148] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.641276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.641441] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.641570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.656268] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.657962] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.658045] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.658098] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.658418] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.658747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.658978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.659181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.659410] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.659673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.659955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.660221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.660471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.660754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.660988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.661528] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.685377] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.685576] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.685845] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.686082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.686263] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.686435] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.686657] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.686858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.687098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.687316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.687527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.687756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.687961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.688226] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.690548] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.691049] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.691184] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.691332] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.691465] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.706266] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.707854] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.707943] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.707998] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.708272] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.708494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.708757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.708960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.709202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.709450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.709797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.710087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.710366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.710693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.710955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.711537] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.740528] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.740733] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.740883] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.743924] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [401.744019] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [401.744148] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.744230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.744302] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.744367] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [401.744430] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [401.744518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [401.744647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [401.744764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [401.744863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.744952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.745039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [401.745149] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [401.749746] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.749861] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.756253] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.757570] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [401.757634] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [401.757674] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.757913] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.758059] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.758128] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.758195] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.758259] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.758334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.758432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.758551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.758665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.758776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.758870] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.759105] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.773941] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [401.774119] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.774336] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.774514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.774661] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.774803] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.774938] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.775099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.775365] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.775511] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.775629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.775742] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.775854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.775964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.776091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.776347] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.776466] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.776600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.776697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.776792] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.776897] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.777015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.777169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [401.777317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [401.777459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.777619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.777752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [401.777914] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.789582] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.790902] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [401.790943] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [401.790973] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.791225] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.791464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.791763] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.791988] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.792144] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.792270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.792443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.792622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.792780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.792956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.793107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.793460] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.807136] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [401.807282] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.807539] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.807751] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.807923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.808079] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.808229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.808418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.808668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.808876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.809074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.809293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.809491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.809713] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.822905] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.824608] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [401.824689] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [401.824742] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.825048] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.825254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.825447] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.825698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.825884] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.826136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.826420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.826711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.826966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.827260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.827505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.828082] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.840682] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [401.840850] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.841112] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.841316] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.841530] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.841713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [401.841932] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [401.842163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [401.842425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [401.842710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [401.842947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.843180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [401.843441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [401.843738] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.856240] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.857792] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [401.857850] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [401.857885] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.858118] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.858356] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.858636] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.858875] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.859097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.859282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.859527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.859753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.859969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.860172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.860367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.860903] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.874638] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [401.874821] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.875106] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.875332] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.875577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.875780] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [401.876026] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [401.876265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [401.876591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [401.876894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [401.877190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.877550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [401.877886] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [401.878220] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.889549] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.891081] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [401.891150] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [401.891193] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.891448] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.891753] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.891951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.892142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.892366] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.892612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.892897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.893146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.893381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.893679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.893896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.894429] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.913222] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [401.913361] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.913614] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [401.913775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.913933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.914074] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.914214] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.914354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [401.914554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [401.914727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [401.914897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.915070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [401.915234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [401.915436] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.922884] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.924317] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [401.924383] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [401.924426] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.924784] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [401.925037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.925202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.925350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.925520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.925680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.925888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.926095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.926293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.926489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.926672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.927091] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.945394] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [401.945620] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.945872] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [401.946191] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [401.946410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [401.946673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.946859] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.947036] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.947241] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.947426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.947641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.947808] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [401.948024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [401.948248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [401.948516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [401.948761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [401.949000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [401.949260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [401.949491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [401.949785] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.956213] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [401.957595] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [401.957659] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [401.957709] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [401.957951] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [401.958104] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [401.958241] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.958376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.958537] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.958668] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.958795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.958920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.959051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.959149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.959247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.959381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.959529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.959655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.959779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.959901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.960198] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [401.982738] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [401.982941] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [401.983223] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [401.983573] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [401.983786] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [401.983985] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.984172] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.984347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.984569] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.984738] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [401.984895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [401.985052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [401.985205] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [401.985377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [401.985633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [401.985859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [401.986084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [401.986294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [401.986519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [401.986756] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [401.990483] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [401.990925] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [401.991087] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [401.991219] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.991333] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.006217] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.007841] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.007910] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [402.007961] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.008240] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [402.008512] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [402.008739] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.008973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.009157] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.009358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.009562] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.009725] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.009886] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.010046] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.010217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.010470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.010706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.010929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.011147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.011385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.011902] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.036946] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.037152] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [402.037434] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.037727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.037902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.038067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.038252] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.038428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.038684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.038893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.039101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.039296] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.039526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.039750] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [402.040481] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.041047] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.041253] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.043021] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.043160] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.056207] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.057839] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.057912] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [402.057958] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.058251] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.058527] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.058757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.058984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.059191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.059390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.059698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.059952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.060196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.060487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.060711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.061208] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.085601] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.085781] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [402.086036] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.086231] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.086407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.086630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.086793] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.086973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.087293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [402.087469] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.087606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.087737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.087875] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.088028] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.088163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.088347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.088549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.088720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.088888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.089054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.089273] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [402.091479] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.091943] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.092116] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.092302] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.092408] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.106207] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.107801] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.107871] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [402.107926] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.108247] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.108553] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.108763] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.108967] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.109164] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.109415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.109758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.110035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.110294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.110619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.110854] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.111377] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.135660] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.135840] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [402.136103] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.136338] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.136578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.136755] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.136923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.137130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.137356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.137596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.137800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.138003] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.138198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.138436] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [402.156197] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.157742] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.157811] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [402.157859] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.158131] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.158382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.158659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.158866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.159113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.159343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.159678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.159972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.160262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.160613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.160877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.161511] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.190468] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.190670] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.190823] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.194193] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.194289] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [402.194430] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.194535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.194626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.194711] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [402.194778] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [402.194855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [402.194948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [402.195038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [402.195127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [402.195214] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [402.195299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [402.195414] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [402.200938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.201045] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.206191] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.207460] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.207525] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [402.207564] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.207803] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.207995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.208096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.208156] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.208215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.208283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.208374] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.208482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.208578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.208670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.208763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.208980] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.223923] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [402.224098] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.224308] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.224531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.224686] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.224824] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [402.224978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [402.225143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [402.225336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [402.225540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [402.225717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.225891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.226070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [402.226286] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.239508] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.240901] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [402.240947] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [402.240977] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.241186] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.241393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.241661] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.241872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.242035] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.242180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.242368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.242586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.242775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.242995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.243209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.243754] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.257212] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.257436] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.257738] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.257959] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.258166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.258362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.258631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.258850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.259150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.259450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.259744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.260012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.260265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.260613] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.272839] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.274470] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.274543] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [402.274589] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.274864] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.275134] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.275343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.275624] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.275823] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.276092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.276415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.276711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.276984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.277256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.277546] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.278149] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.290477] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [402.290637] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.290866] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.291049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.291225] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.291427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.291608] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.291846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.292114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.292366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.292682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.292911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.293133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.293400] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.306162] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.307692] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [402.307754] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [402.307792] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.308016] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.308238] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.308480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.308685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.308927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.309130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.309362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.309615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.309829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.310039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.310266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.310784] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.330049] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.330231] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.330559] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.330794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.330999] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.331192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [402.331430] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [402.331653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [402.331986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [402.332264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [402.332559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.332866] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.333119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [402.333421] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.339481] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.340899] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.340954] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [402.340986] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.341220] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.341513] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.341721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.341900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.342085] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.342260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.342512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.342709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.342905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.343092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.343270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.343832] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.368806] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.369001] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.369219] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.369416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.369581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.369716] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.369857] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.370005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.370192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.370385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.370558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.370722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.370881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.371075] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.389483] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.391051] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.391119] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [402.391162] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.391479] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.391712] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.391949] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.392187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.392454] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.392739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.393104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.393453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.393782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.394125] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.394536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.395463] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.419673] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.419860] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.420142] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.420334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.420557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.420721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.420900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.421081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.421377] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.421538] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.421673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.421804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.421935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.422061] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.422189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.422379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.422562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.422737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.422934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.423101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.423301] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.423416] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.424019] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.424212] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.426538] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.426667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.439489] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.441006] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.441074] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [402.441120] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.441405] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.441625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.441830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.442027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.442230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.442449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.442710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.442965] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.443202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.443449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.443673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.444192] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.468942] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.469127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [402.469407] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.469620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.469798] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.469957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.470133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.470323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.470592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.470786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.470975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.471185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.471375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.471584] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [402.474402] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.474554] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.474675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.474808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.474923] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.489489] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.490997] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.491066] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [402.491114] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.491421] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.491656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.491864] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.492086] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.492301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.492586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.492870] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.493146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.493416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.493666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.493913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.494525] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.507258] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [402.507506] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.507788] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.507992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.508179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.508381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [402.508558] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [402.508757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [402.509052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [402.509325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [402.509632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.509899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.510160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [402.510538] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.522806] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.524358] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [402.524436] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [402.524479] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.524736] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.524960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.525141] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.525317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.525576] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.525775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.526046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.526321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.526637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.526903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.527206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.527821] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.540452] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.540660] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.541163] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.541464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.541737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.541940] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.542137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.542379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.542709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.542990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.543245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.543517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.543761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.544046] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.556129] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.557671] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.557741] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [402.557784] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.558036] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.558233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.558459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.558640] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.558854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.559080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.559382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.559647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.559898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.560190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.560441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.560995] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.573808] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [402.573979] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.574243] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.574496] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.574694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.574892] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.575135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.575381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.575668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.575950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.576224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.576521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.576779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.577089] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.589462] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.590896] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [402.590954] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [402.590992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.591227] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.591505] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.591689] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.591874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.592076] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.592261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.592531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.592745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.592955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.593185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.593397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.593829] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.613174] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.613421] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.613707] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.613969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.614166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.614377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [402.614565] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [402.614816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [402.615106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [402.615392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [402.615650] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.615905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [402.616157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [402.616505] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.622775] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.624178] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.624241] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [402.624283] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.624620] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.624830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.625011] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.625160] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.625347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.625512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.625722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.625927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.626127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.626348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.626527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.626931] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.651727] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.651891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.652115] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.652279] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.652481] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.652629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.652776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.652939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.653145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.653346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.653533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.653716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.653887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.654130] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.672793] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.674392] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.674456] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [402.674498] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.674746] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.674945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.675142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.675360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.675564] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.675804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.676090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.676373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.676640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.676890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.677138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.677689] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.702038] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.702248] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.702526] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.702704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.702863] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.703035] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.703211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.703397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.703619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.703810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.704000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.704175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.704363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.704575] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.707352] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.707526] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.707653] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.707786] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.707902] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.722765] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.724293] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.724375] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [402.724417] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.724676] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.724915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.725120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.725343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.725532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.725786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.726066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.726352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.726597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.726835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.727069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.727623] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [402.752378] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [402.752570] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.752847] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.753050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.753224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.753441] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.753601] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.753809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.754121] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [402.754325] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [402.754475] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.754606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [402.754737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [402.754865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [402.755019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [402.755233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [402.755435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [402.755614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.755785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [402.755955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [402.756188] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [402.757366] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.757846] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.758058] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.759378] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [402.759510] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [402.772774] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [402.774292] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [402.774376] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [402.774419] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [402.774661] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [402.774854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [402.775041] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.775229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.775486] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [402.775683] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [402.775945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [402.776191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [402.776463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.776694] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [402.776949] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [402.777473] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [402.790653] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [399.788815] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [399.792732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.794520] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [399.794927] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [399.795249] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [399.795575] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [399.795912] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B]

<7> [399.796287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [399.796581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [399.796869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [399.797141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [399.797393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [399.797642] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [399.797883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [399.798113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [399.798330] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [399.798570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [399.798772] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [399.799084] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [399.799274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [399.799461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [399.799637] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [399.799810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [399.800044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [399.800225] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [399.800384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [399.800558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [399.800709] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [399.800863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [399.801013] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [399.801155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [399.801294] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [399.801428] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [399.801562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [399.801691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [399.801821] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [399.801975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [399.802101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [399.802238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [399.802362] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [399.802483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [399.802604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [399.802721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [399.802842] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [399.802962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [399.803088] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [399.803213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [399.803322] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [399.803426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [399.803527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [399.803628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [399.803737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [399.803843] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [399.803885] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [399.803943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [399.804040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [399.804047] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [399.804137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [399.804177] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [399.804226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [399.804313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [399.804401] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [399.804490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [399.804577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [399.804664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [399.804749] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [399.804831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [399.804961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [399.805045] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [399.805126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [399.805204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [399.805280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [399.805356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [399.805435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [399.805518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [399.805593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [399.805664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [399.805735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [399.805806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [399.805892] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [399.805972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [399.806050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [399.806127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [399.806199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [399.806269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [399.806340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [399.806410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [399.806481] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset

<7> [399.806555] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [399.806645] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.806731] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [399.806793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [399.806865] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [399.806931] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.806992] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [399.807052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.807111] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.807167] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.807220] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.807288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [399.807374] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [399.807457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [399.807539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.807621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.807703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [399.807803] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz

<7> [399.807908] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz

<7> [399.808031] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz

<7> [399.808161] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0

<7> [399.808248] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0

<7> [399.808334] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.808394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]

<7> [399.808477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [399.808558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [399.808637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [399.808716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [399.808801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [399.808904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [399.809001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset]

<7> [399.809091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [399.809173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [399.809251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [399.809327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [399.809405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [399.809481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [399.809558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [399.809634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [399.809711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [399.809788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [399.809871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [399.809955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [399.810037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [399.810120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [399.810197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [399.810274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [399.810349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [399.810424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [399.810501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [399.810577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [399.810654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [399.810731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [399.810808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [399.810896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [399.810987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [399.811080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [399.811167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [399.811247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [399.811326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [399.811399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0

<7> [399.811472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [399.811545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [399.811618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [399.811690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [399.811762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [399.811837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [399.811922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [399.812017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [399.812111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [399.812190] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [399.812262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [399.812333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [399.812405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [399.812476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [399.812547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [399.812618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [399.812690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [399.812766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [399.812858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [399.812947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [399.813041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [399.813119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [399.813192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [399.813265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [399.813337] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [399.813408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [399.813479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [399.813551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [399.813623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [399.813696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [399.813767] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0

<7> [399.813847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no

<7> [399.813929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no

<7> [399.814012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no

<7> [399.814093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no

<7> [399.814172] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no

<7> [399.815623] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [399.815721] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [399.815867] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [399.816010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [399.816183] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [399.816334] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [399.816419] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [400.024083] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0

<7> [400.024529] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [400.038161] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off

<7> [400.038456] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [400.038753] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [400.091323] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [400.091644] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [400.099847] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [400.100237] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [400.100295] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [400.101700] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [400.102139] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [400.102547] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [400.102814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [400.103051] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [400.103297] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [400.103518] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [400.103734] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [400.104003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [400.104234] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [400.104461] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [400.104725] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [400.104969] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [400.105176] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [400.105380] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [400.105625] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]

<7> [400.105849] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]

<7> [400.106097] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]

<7> [400.106369] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)

<7> [400.106609] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [400.107819] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B]

<7> [400.108081] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [400.110375] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on

<7> [400.110574] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining)

<7> [400.126193] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [400.126511] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [400.126826] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [400.127199] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [400.608169] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [400.649077] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [400.649464] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on

<7> [400.649870] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [400.686406] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [400.686742] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [400.687023] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [400.687617] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [400.861065] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [400.861414] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on

<7> [400.861750] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [400.863673] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [400.865140] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [400.865833] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [400.866909] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [400.868252] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [400.869311] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK

<7> [400.869703] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [400.871148] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [400.871518] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [400.872411] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [400.872975] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [400.873342] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [400.873771] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518

<7> [400.889805] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [400.890162] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [400.890560] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [400.890901] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.892313] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [400.892575] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]

<7> [400.896064] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [400.896366] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [400.896456] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [400.896526] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.896843] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.897078] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.897302] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.897525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.897801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.898062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.898402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.898764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.899075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.899382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.899673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.900477] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.907718] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.907933] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [400.908228] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.908442] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.908666] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.908852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.909063] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.909292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.909541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.909806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.910029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.910248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.910453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.910741] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz

<7> [400.910937] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [400.923055] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.924673] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.924742] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [400.924788] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.925087] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.925339] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.925577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.925890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.926097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.926317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.926589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.926853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.927077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.927298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.927504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.928027] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.940735] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [400.940920] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [400.941222] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.941459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.941722] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.941935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.942170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.942405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.942718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.943019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.943332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.943711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.944069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.944371] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [400.956379] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.957934] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [400.958000] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [400.958041] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.958353] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.958746] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.958978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.959170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.959364] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.959566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.959824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.960056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.960266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.960481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.960685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.961168] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.975034] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.975223] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [400.975513] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.975773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.975992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.976203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [400.976409] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [400.976712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [400.977015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [400.977308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [400.977597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.977979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.978252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [400.978621] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz

<7> [400.978922] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [400.989715] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.991193] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.991260] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [400.991303] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.991612] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.991913] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.992106] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.992286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.992462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.992662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.992938] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.993172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.993396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.993615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.993859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.994322] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.013596] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.013779] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.014003] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.014186] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.014336] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.014477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.014616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.014823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.015022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [401.015208] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [401.015384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.015564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.015775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [401.015994] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.023018] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.024459] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.024528] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.024572] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.024898] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.025123] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.025284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.025436] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.025586] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.025789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.025995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.026197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.026390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.026578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.026780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.027225] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.045710] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.045915] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.046178] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [401.046490] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [401.046742] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [401.046930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.047113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.047292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.047500] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.047733] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.047950] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.048127] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.048301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.048493] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [401.048848] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.049046] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [401.049236] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [401.049393] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [401.049546] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.049734] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.049878] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.050019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.050151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.050281] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.050410] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.050533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.050684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [401.050889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [401.051086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [401.051273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [401.051451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [401.051659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [401.051867] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.056464] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.057637] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.057670] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.057696] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.057812] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [401.057899] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [401.057973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.058044] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.058163] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.058351] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.058528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.058778] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.058952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.059084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.059160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.059263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.059363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.059458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.059551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.059648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.059930] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.079639] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.079776] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.079963] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [401.080161] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [401.080315] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [401.080462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.080624] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.080775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.080920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.081081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.081213] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.081353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.081506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.081699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [401.081961] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.082097] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [401.082241] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [401.082357] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [401.082471] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.082579] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.082723] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.082843] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.082976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.083094] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.083204] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.083324] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.083429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [401.083640] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.083749] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [401.083866] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [401.083960] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [401.084050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.084138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.084233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.084335] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.084431] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.084516] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.084602] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.084721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.084810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [401.084949] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [401.085086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [401.085216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [401.085343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [401.085469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [401.085630] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.106337] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.107577] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.107682] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.107721] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.107878] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [401.108002] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [401.108161] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.108362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.108557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.108813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.109010] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.109139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.109218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.109297] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.109387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.109508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.109631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.109746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.109859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.109972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.110244] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.134544] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.134739] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.135020] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.135223] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.135400] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.135620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.135788] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.135975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.136210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.136433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.136654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.136864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.137103] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.137340] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.156349] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.158154] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.158246] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.158305] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.158680] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.159007] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.159259] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.159512] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.159819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.160109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.160512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.160923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.161233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.161566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.161906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.162541] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.186919] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.187092] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.187343] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.187561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.187802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.187964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.188116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.188311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.188535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.188757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.188953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.189137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.189309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.189524] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.191635] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.192276] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.192443] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.192663] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.192795] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.206344] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.208038] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.208126] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.208182] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.208529] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.208873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.209130] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.209317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.209534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.209788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.210051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.210308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.210550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.210875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.211103] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.211644] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.236353] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.236552] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.236881] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.237119] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.237296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.237464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.237646] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.237837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.238071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.238286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.238503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.238725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.238912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.239142] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.241616] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.242142] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.242307] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.242453] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.242576] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.256336] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.258025] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.258108] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.258160] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.258480] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.258794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.259023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.259227] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.259448] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.259723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.260002] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.260263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.260519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.260808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.261040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.261542] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.290609] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.290830] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.290986] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.294198] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.294292] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [401.294436] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.294519] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.294606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.294692] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [401.294777] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [401.294875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [401.294983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [401.295077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [401.295166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.295254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.295341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [401.295459] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [401.299925] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.300029] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.306322] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.307655] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.307726] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [401.307769] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.308023] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.308116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.308193] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.308269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.308341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.308424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.308543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.308684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.308798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.308905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.309004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.309240] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.323933] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [401.324148] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.324390] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.324612] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.324772] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.324926] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.325071] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.325232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.325436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [401.325644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [401.325832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.326017] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.326191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [401.326401] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.339643] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.341087] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [401.341164] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [401.341213] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.341491] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.341773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.342009] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.342180] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.342354] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.342526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.342789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.343021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.343249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.343522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.343787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.344384] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.357433] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.357669] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.357970] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.358240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.358460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.358712] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.358918] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.359156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.359470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.359798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.360067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.360390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.360672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.360974] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.372969] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.374497] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.374599] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.374648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.374924] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.375144] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.375353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.375598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.375814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.376031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.376307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.376576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.376828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.377118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.377353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.377910] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.390764] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [401.390974] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.391242] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.391458] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.391708] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.391911] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.392147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.392388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.392752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.393039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.393340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.393628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.393905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.394239] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.406307] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.407841] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [401.407899] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [401.407937] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.408183] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.408427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.408663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.408882] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.409093] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.409277] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.409508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.409768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.409979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.410221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.410426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.410941] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.424813] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.424992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.425290] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.425530] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.425820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.426038] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [401.426249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [401.426487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [401.426947] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.427210] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.427409] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.427616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.427794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [401.427969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [401.428186] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [401.428458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [401.428765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [401.429083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.429322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.429560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [401.429843] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.439608] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.440862] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.440908] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.440939] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.441185] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.441389] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.441613] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.441803] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.442017] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.442141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.442290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.442436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.442597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.442735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.442865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.443191] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.462331] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.462450] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.462652] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.462788] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.462907] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.463019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.463139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.463282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.463443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [401.463604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [401.463746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.463885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.464020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [401.464199] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.472959] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.474502] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.474601] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.474648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.474926] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.475149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.475356] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.475600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.475816] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.476059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.476298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.476517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.476766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.476977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.477207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.477686] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.495864] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.496050] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.496312] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [401.496628] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [401.496839] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [401.497040] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.497239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.497428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.497717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.497905] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.498095] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.498262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.498426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.498643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [401.498890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [401.499147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [401.499369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [401.499645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [401.499864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [401.500117] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.506278] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.507490] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.507522] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.507582] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.507710] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [401.507809] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [401.507903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.507992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.508083] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.508209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.508340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.508459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.508599] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.508709] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.508830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.508996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.509120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.509238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.509351] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.509460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.509764] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.532410] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.532616] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.532880] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [401.533206] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [401.533416] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [401.533649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.533836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.534015] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.534224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.534406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.534605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.534761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.534915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.535096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [401.535325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [401.535563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [401.535777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [401.535993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [401.536228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [401.536477] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.556281] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.557844] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.557914] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.557971] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.558250] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [401.558522] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [401.558795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.559019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.559237] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.559459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.559724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.559927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.560148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.560334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.560565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.560863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.561145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.561412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.561715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.561962] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.562546] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.584134] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.584297] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.584575] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.584774] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.584965] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.585146] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.585312] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.585533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.585763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.585987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.586193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.586396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.586608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.586843] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.606282] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.607939] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.608022] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.608076] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.608393] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.608749] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.608991] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.609218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.609470] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.609762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.610060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.610353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.610648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.610912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.611221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.611780] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.635840] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.636018] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.636255] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.636431] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.636638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.636793] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.636941] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.637111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.637332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.637540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.637732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.637915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.638092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.638298] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.640545] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.641148] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.641276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.641441] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.641570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.656268] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.657962] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.658045] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.658098] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.658418] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.658747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.658978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.659181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.659410] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.659673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.659955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.660221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.660471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.660754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.660988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.661528] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.685377] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.685576] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.685845] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.686082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.686263] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.686435] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.686657] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.686858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.687098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.687316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.687527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.687756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.687961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.688226] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.690548] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.691049] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.691184] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.691332] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.691465] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.706266] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.707854] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.707943] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.707998] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.708272] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.708494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.708757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.708960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.709202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.709450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.709797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.710087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.710366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.710693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.710955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.711537] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.740528] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.740733] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.740883] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.743924] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [401.744019] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [401.744148] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.744230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.744302] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.744367] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [401.744430] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [401.744518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [401.744647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [401.744764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [401.744863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.744952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.745039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [401.745149] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [401.749746] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.749861] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.756253] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.757570] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [401.757634] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [401.757674] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.757913] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.758059] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.758128] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.758195] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.758259] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.758334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.758432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.758551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.758665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.758776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.758870] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.759105] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.773941] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [401.774119] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.774336] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.774514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.774661] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.774803] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.774938] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.775099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.775365] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.775511] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.775629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.775742] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.775854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.775964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.776091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.776347] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.776466] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.776600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.776697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.776792] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.776897] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.777015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.777169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [401.777317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [401.777459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.777619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.777752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [401.777914] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.789582] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.790902] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [401.790943] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [401.790973] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.791225] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.791464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.791763] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.791988] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.792144] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.792270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.792443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.792622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.792780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.792956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.793107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.793460] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.807136] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [401.807282] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.807539] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.807751] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.807923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.808079] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.808229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.808418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.808668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.808876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.809074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.809293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.809491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.809713] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.822905] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.824608] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [401.824689] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [401.824742] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.825048] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.825254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.825447] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.825698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.825884] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.826136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.826420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.826711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.826966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.827260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.827505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.828082] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.840682] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [401.840850] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.841112] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.841316] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.841530] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.841713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [401.841932] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [401.842163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [401.842425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [401.842710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [401.842947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.843180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [401.843441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [401.843738] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.856240] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.857792] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [401.857850] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [401.857885] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.858118] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.858356] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.858636] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.858875] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.859097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.859282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.859527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.859753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.859969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.860172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.860367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.860903] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.874638] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [401.874821] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.875106] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.875332] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.875577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.875780] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [401.876026] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [401.876265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [401.876591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [401.876894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [401.877190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.877550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [401.877886] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [401.878220] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.889549] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.891081] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [401.891150] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [401.891193] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.891448] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.891753] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.891951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.892142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.892366] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.892612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.892897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.893146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.893381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.893679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.893896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.894429] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.913222] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [401.913361] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.913614] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [401.913775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.913933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.914074] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.914214] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.914354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [401.914554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [401.914727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [401.914897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.915070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [401.915234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [401.915436] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.922884] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.924317] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [401.924383] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [401.924426] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.924784] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [401.925037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.925202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.925350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.925520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.925680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.925888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.926095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.926293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.926489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.926672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.927091] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.945394] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [401.945620] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.945872] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [401.946191] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [401.946410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [401.946673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.946859] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.947036] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.947241] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.947426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.947641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.947808] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [401.948024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [401.948248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [401.948516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [401.948761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [401.949000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [401.949260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [401.949491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [401.949785] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.956213] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [401.957595] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [401.957659] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [401.957709] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [401.957951] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [401.958104] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [401.958241] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.958376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.958537] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.958668] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.958795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.958920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.959051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.959149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.959247] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.959381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.959529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.959655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.959779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.959901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.960198] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [401.982738] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [401.982941] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [401.983223] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [401.983573] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [401.983786] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [401.983985] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.984172] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.984347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.984569] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.984738] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [401.984895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [401.985052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [401.985205] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [401.985377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [401.985633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [401.985859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [401.986084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [401.986294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [401.986519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [401.986756] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [401.990483] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [401.990925] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [401.991087] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [401.991219] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.991333] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.006217] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.007841] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.007910] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [402.007961] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.008240] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [402.008512] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [402.008739] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.008973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.009157] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.009358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.009562] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.009725] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.009886] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.010046] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.010217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.010470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.010706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.010929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.011147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.011385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.011902] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.036946] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.037152] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [402.037434] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.037727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.037902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.038067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.038252] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.038428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.038684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.038893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.039101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.039296] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.039526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.039750] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [402.040481] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.041047] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.041253] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.043021] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.043160] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.056207] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.057839] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.057912] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [402.057958] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.058251] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.058527] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.058757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.058984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.059191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.059390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.059698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.059952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.060196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.060487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.060711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.061208] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.085601] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.085781] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [402.086036] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.086231] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.086407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.086630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.086793] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.086973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.087293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [402.087469] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.087606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.087737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.087875] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.088028] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.088163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.088347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.088549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.088720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.088888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.089054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.089273] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [402.091479] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.091943] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.092116] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.092302] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.092408] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.106207] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.107801] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.107871] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [402.107926] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.108247] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.108553] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.108763] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.108967] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.109164] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.109415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.109758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.110035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.110294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.110619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.110854] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.111377] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.135660] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.135840] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [402.136103] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.136338] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.136578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.136755] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.136923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.137130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.137356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.137596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.137800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.138003] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.138198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.138436] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [402.156197] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.157742] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.157811] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [402.157859] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.158131] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.158382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.158659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.158866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.159113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.159343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.159678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.159972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.160262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.160613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.160877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.161511] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.190468] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.190670] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.190823] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.194193] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.194289] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [402.194430] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.194535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.194626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.194711] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [402.194778] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [402.194855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [402.194948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [402.195038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [402.195127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [402.195214] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [402.195299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [402.195414] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [402.200938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.201045] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.206191] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.207460] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.207525] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [402.207564] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.207803] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.207995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.208096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.208156] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.208215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.208283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.208374] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.208482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.208578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.208670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.208763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.208980] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.223923] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [402.224098] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.224308] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.224531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.224686] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.224824] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [402.224978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [402.225143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [402.225336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [402.225540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [402.225717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.225891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.226070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [402.226286] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.239508] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.240901] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [402.240947] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [402.240977] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.241186] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.241393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.241661] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.241872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.242035] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.242180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.242368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.242586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.242775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.242995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.243209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.243754] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.257212] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.257436] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.257738] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.257959] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.258166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.258362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.258631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.258850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.259150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.259450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.259744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.260012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.260265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.260613] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.272839] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.274470] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.274543] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [402.274589] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.274864] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.275134] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.275343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.275624] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.275823] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.276092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.276415] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.276711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.276984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.277256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.277546] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.278149] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.290477] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [402.290637] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.290866] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.291049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.291225] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.291427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.291608] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.291846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.292114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.292366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.292682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.292911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.293133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.293400] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.306162] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.307692] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [402.307754] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [402.307792] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.308016] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.308238] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.308480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.308685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.308927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.309130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.309362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.309615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.309829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.310039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.310266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.310784] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.330049] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.330231] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.330559] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.330794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.330999] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.331192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [402.331430] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [402.331653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [402.331986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [402.332264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [402.332559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.332866] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.333119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [402.333421] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.339481] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.340899] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.340954] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [402.340986] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.341220] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.341513] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.341721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.341900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.342085] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.342260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.342512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.342709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.342905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.343092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.343270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.343832] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.368806] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.369001] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.369219] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.369416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.369581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.369716] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.369857] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.370005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.370192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.370385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.370558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.370722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.370881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.371075] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.389483] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.391051] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.391119] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [402.391162] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.391479] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.391712] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.391949] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.392187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.392454] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.392739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.393104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.393453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.393782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.394125] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.394536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.395463] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.419673] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.419860] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.420142] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.420334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.420557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.420721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.420900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.421081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.421377] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.421538] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.421673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.421804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.421935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.422061] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.422189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.422379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.422562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.422737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.422934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.423101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.423301] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.423416] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.424019] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.424212] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.426538] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.426667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.439489] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.441006] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.441074] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [402.441120] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.441405] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.441625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.441830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.442027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.442230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.442449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.442710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.442965] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.443202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.443449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.443673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.444192] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.468942] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.469127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [402.469407] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.469620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.469798] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.469957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.470133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.470323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.470592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.470786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.470975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.471185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.471375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.471584] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [402.474402] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.474554] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.474675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.474808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.474923] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.489489] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.490997] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.491066] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [402.491114] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.491421] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.491656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.491864] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.492086] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.492301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.492586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.492870] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.493146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.493416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.493666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.493913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.494525] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.507258] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [402.507506] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.507788] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.507992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.508179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.508381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [402.508558] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [402.508757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [402.509052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [402.509325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [402.509632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.509899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.510160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [402.510538] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.522806] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.524358] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [402.524436] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [402.524479] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.524736] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.524960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.525141] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.525317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.525576] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.525775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.526046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.526321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.526637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.526903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.527206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.527821] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.540452] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.540660] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.541163] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.541464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.541737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.541940] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.542137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.542379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.542709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.542990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.543245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.543517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.543761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.544046] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.556129] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.557671] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.557741] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [402.557784] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.558036] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.558233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.558459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.558640] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.558854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.559080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.559382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.559647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.559898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.560190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.560441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.560995] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.573808] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [402.573979] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.574243] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.574496] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.574694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.574892] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.575135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.575381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.575668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.575950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.576224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.576521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.576779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.577089] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.589462] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.590896] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [402.590954] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [402.590992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.591227] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.591505] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.591689] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.591874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.592076] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.592261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.592531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.592745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.592955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.593185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.593397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.593829] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.613174] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.613421] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.613707] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.613969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.614166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.614377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [402.614565] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [402.614816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [402.615106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [402.615392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [402.615650] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.615905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [402.616157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [402.616505] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.622775] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.624178] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.624241] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [402.624283] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.624620] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.624830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.625011] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.625160] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.625347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.625512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.625722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.625927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.626127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.626348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.626527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.626931] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.651727] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.651891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.652115] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.652279] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.652481] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.652629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.652776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.652939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.653145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.653346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.653533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.653716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.653887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.654130] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.672793] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.674392] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.674456] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [402.674498] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.674746] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.674945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.675142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.675360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.675564] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.675804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.676090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.676373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.676640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.676890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.677138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.677689] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.702038] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.702248] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.702526] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.702704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.702863] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.703035] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.703211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.703397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.703619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.703810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.704000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.704175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.704363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.704575] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.707352] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.707526] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.707653] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.707786] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.707902] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.722765] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.724293] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.724375] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [402.724417] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.724676] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.724915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.725120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.725343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.725532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.725786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.726066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.726352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.726597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.726835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.727069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.727623] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [402.752378] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [402.752570] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.752847] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.753050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.753224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.753441] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.753601] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.753809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.754121] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [402.754325] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [402.754475] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.754606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [402.754737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [402.754865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [402.755019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [402.755233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [402.755435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [402.755614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.755785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [402.755955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [402.756188] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [402.757366] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.757846] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.758058] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.759378] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [402.759510] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [402.772774] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [402.774292] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [402.774376] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [402.774419] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [402.774661] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [402.774854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [402.775041] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.775229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.775486] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [402.775683] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [402.775945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [402.776191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [402.776463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.776694] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [402.776949] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [402.777473] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [402.790653] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b