<5>[ 0.000000] Linux version 7.0.0-rc6-lgci-xe-xe-4852-d873f0156bd08a303-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Sun Apr 5 15:32:43 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] printk: legacy bootconsole [earlyser0] enabled <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.004094] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.004098] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.009573] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.018015] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.025242] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.030757] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.040645] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.048342] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.048362] Using GB pages for direct mapping <6>[ 0.053381] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.060815] printk: early log buf free: 258368(98%) <6>[ 0.065691] Secure boot disabled <6>[ 0.068910] ACPI: Early table checksum verification disabled <6>[ 0.074570] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.080311] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.088840] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.097369] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.105897] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.110507] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.119034] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.127564] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.136090] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.144619] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.153148] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.161676] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.170205] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.178730] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.187257] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.195787] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.204315] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.212843] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.221369] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.229897] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.238428] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.246958] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.255483] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.264012] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.272540] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.281070] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.289597] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.298126] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.306653] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.315188] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.323712] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.332239] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.340771] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.349297] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.357827] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.366356] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.374883] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.383412] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.391943] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.400470] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.408999] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.417526] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.426056] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.434585] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.443112] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.451641] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.460171] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.468699] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.477228] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.485760] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.494287] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.501336] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.508386] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.515433] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.522486] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.529535] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.536582] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.543632] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.550681] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.557731] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.564778] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.571827] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.578876] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.585924] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.592973] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.600023] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.607069] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.614120] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.621169] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.628217] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.635266] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.642316] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.649367] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.656412] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.663460] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.670509] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.677559] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.684607] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.691659] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.698702] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.705754] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.712804] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.719853] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.726900] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.733950] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.740997] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.748049] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.755095] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.762146] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.769197] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.776242] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.783294] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.790342] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.797389] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.804441] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.811490] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.818540] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.825587] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.832702] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.838334] No NUMA configuration found <6>[ 0.842018] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.848725] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.855293] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.859246] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.865554] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.872467] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.878818] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.885433] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.891874] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.897013] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.897019] TSC deadline timer available <6>[ 0.900926] CPU topo: Max. logical packages: 1 <6>[ 0.905537] CPU topo: Max. logical nodes: 1 <6>[ 0.910149] CPU topo: Num. nodes per package: 1 <6>[ 0.914758] CPU topo: Max. logical dies: 1 <6>[ 0.919372] CPU topo: Max. dies per package: 1 <6>[ 0.923983] CPU topo: Max. threads per core: 1 <6>[ 0.928595] CPU topo: Num. cores per package: 8 <6>[ 0.933469] CPU topo: Num. threads per package: 8 <6>[ 0.938341] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.944441] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.952000] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.959572] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.967141] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.974715] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.982283] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.989939] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.996033] Booting paravirtualized kernel on bare hardware <6>[ 1.001601] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 1.012077] Zone ranges: <6>[ 1.014566] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 1.020743] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 1.026923] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 1.033101] Device empty <6>[ 1.035970] Movable zone start for each node <6>[ 1.040237] Early memory node ranges <6>[ 1.043806] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 1.050067] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 1.056331] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 1.062597] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 1.068862] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 1.075917] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 1.081758] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 1.089223] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 1.123319] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 1.129630] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 1.135979] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 1.143969] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 1.150450] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 1.150452] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 1.150470] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <7>[ 1.189963] blacklisting initcall simpledrm_platform_driver_init <5>[ 1.189996] random: crng init done <6>[ 1.195085] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 1.203960] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 1.211890] software IO TLB: area num 8. <6>[ 1.223119] Fallback order for Node 0: 0 <6>[ 1.223123] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 1.233862] Policy zone: Normal <6>[ 1.237003] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 1.243173] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 1.249962] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 1.258811] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 1.297281] ********************************************************** <4>[ 1.303672] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.310198] ** ** <4>[ 1.316723] ** This system shows unhashed kernel memory addresses ** <4>[ 1.323250] ** via the console, logs, and other interfaces. This ** <4>[ 1.329776] ** might reduce the security of your system. ** <4>[ 1.336299] ** ** <4>[ 1.342825] ** If you see this message and you are not debugging ** <4>[ 1.349352] ** the kernel, report this immediately to your system ** <4>[ 1.355876] ** administrator! ** <4>[ 1.362402] ** ** <4>[ 1.368931] ** Use hash_pointers=always to force this mode off ** <4>[ 1.375455] ** ** <4>[ 1.381985] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.388510] ********************************************************** <6>[ 1.396118] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 1.410919] ftrace: allocating 61452 entries in 242 pages <6>[ 1.416178] ftrace: allocated 242 pages with 5 groups <6>[ 1.422258] Dynamic Preempt: lazy <6>[ 1.425935] Running RCU self tests <6>[ 1.429188] Running RCU synchronous self tests <6>[ 1.433626] rcu: Preemptible hierarchical RCU implementation. <6>[ 1.439370] rcu: RCU lockdep checking is enabled. <6>[ 1.444153] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 1.450944] Trampoline variant of Tasks RCU enabled. <6>[ 1.455988] Rude variant of Tasks RCU enabled. <6>[ 1.460514] Tracing variant of Tasks RCU enabled. <6>[ 1.465301] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 1.472959] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 1.479724] Running RCU synchronous self tests <6>[ 1.484096] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.492800] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.513134] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 1.519563] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 1.526730] Console: colour dummy device 80x25 <6>[ 1.531035] printk: legacy console [tty0] enabled <6>[ 1.536995] printk: legacy console [ttyS0] enabled <6>[ 1.546465] printk: legacy bootconsole [earlyser0] disabled <6>[ 1.557631] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 1.565535] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 1.569664] ... MAX_LOCK_DEPTH: 48 <6>[ 1.573878] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 1.578271] ... CLASSHASH_SIZE: 4096 <6>[ 1.582653] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 1.587212] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 1.591774] ... CHAINHASH_SIZE: 262144 <6>[ 1.596339] memory used by lock dependency info: 54145 kB <6>[ 1.601857] memory used for stack traces: 4224 kB <6>[ 1.606689] per task-struct memory footprint: 1920 bytes <6>[ 1.612180] ACPI: Core revision 20251212 <6>[ 1.617005] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 1.622844] APIC: Switch to symmetric I/O mode setup <6>[ 1.627840] DMAR: Host address width 38 <6>[ 1.631712] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 1.637088] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.645944] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 1.651303] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.660152] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 1.665516] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 1.674373] DMAR: SATC flags: 0x1 <6>[ 1.677718] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 1.684111] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 1.689550] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 1.700262] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 1.710958] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 1.721541] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 1.722535] CPU0: Thermal monitoring enabled (TM1) <6>[ 1.722535] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 1.722535] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 1.722535] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 1.722535] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 1.722535] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 1.722535] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 1.722535] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 1.722535] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 1.722535] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 1.722535] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 1.722535] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 1.722535] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 1.722535] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 1.722535] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 1.722535] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 1.722535] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 1.722535] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 1.722535] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 1.722535] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 1.722535] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 1.722535] Freeing SMP alternatives memory: 56K <6>[ 1.722535] pid_max: default: 32768 minimum: 301 <6>[ 1.722535] landlock: Up and running. <6>[ 1.722535] Yama: becoming mindful. <6>[ 1.722535] AppArmor: AppArmor initialized <6>[ 1.722535] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.722535] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.722535] VFS: Finished mounting rootfs on nullfs <6>[ 1.722535] Running RCU synchronous self tests <6>[ 1.722535] Running RCU synchronous self tests <6>[ 1.722535] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 1.723138] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 1.723704] core: cpu_core PMU driver: <6>[ 1.724540] ... version: 6 <6>[ 1.725545] ... bit width: 48 <6>[ 1.726540] ... generic counters: 10 <6>[ 1.727539] ... generic bitmap: 00000000000003ff <6>[ 1.728540] ... fixed-purpose counters: 4 <6>[ 1.729539] ... fixed-purpose bitmap: 000000000000000f <6>[ 1.730540] ... value mask: 0000ffffffffffff <6>[ 1.731540] ... max period: 00007fffffffffff <6>[ 1.732540] ... global_ctrl mask: 0001000f000003ff <6>[ 1.733617] signal: max sigframe size: 3632 <6>[ 1.734560] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 1.735645] rcu: Hierarchical SRCU implementation. <6>[ 1.736542] rcu: Max phase no-delay instances is 400. <6>[ 1.737708] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 1.740577] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 1.741841] smp: Bringing up secondary CPUs ... <6>[ 1.742946] smpboot: x86: Booting SMP configuration: <6>[ 1.743547] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.196050] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.196050] core: cpu_atom PMU driver: <6>[ 0.196050] ... version: 6 <6>[ 0.196050] ... bit width: 48 <6>[ 0.196050] ... generic counters: 8 <6>[ 0.196050] ... generic bitmap: 00000000000000ff <6>[ 0.196050] ... fixed-purpose counters: 6 <6>[ 0.196050] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.196050] ... value mask: 0000ffffffffffff <6>[ 0.196050] ... max period: 00007fffffffffff <6>[ 0.196050] ... global_ctrl mask: 00000077000000ff <6>[ 1.812675] smp: Brought up 1 node, 8 CPUs <6>[ 1.814057] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 1.817624] Memory: 32297672K/33158528K available (25943K kernel code, 5830K rwdata, 9724K rodata, 5780K init, 67896K bss, 837300K reserved, 0K cma-reserved) <6>[ 1.819545] devtmpfs: initialized <6>[ 1.820889] x86/mm: Memory block size: 128MB <6>[ 1.844145] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 1.845211] Running RCU synchronous self tests <6>[ 1.845587] Running RCU synchronous self tests <6>[ 1.846818] Running RCU Tasks wait API self tests <6>[ 1.847707] Running RCU Tasks Rude wait API self tests <6>[ 1.848578] Running RCU Tasks Trace wait API self tests <6>[ 1.849584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 1.850602] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 1.851620] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 1.853545] PM: RTC time: 07:43:17, date: 2026-04-06 <6>[ 1.856558] Callback from call_rcu_tasks_trace() invoked. <6>[ 1.857553] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 1.871741] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 1.879039] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 1.888022] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 1.895725] audit: initializing netlink subsys (disabled) <5>[ 1.901645] audit: type=2000 audit(1775461396.180:1): state=initialized audit_enabled=0 res=1 <6>[ 1.903804] thermal_sys: Registered thermal governor 'fair_share' <6>[ 1.910559] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 1.916555] thermal_sys: Registered thermal governor 'step_wise' <6>[ 1.922552] thermal_sys: Registered thermal governor 'user_space' <6>[ 1.928555] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 1.934658] cpuidle: using governor ladder <6>[ 1.944560] cpuidle: using governor menu <6>[ 1.955839] efi: Freeing EFI boot services memory: 59312K <6>[ 1.961566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 1.968781] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 1.977607] PCI: Using configuration type 1 for base access <6>[ 1.983954] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 1.995882] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 2.002562] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 2.009595] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.016592] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.032679] raid6: skipped pq benchmark and selected avx2x4 <6>[ 2.038554] raid6: using avx2x2 recovery algorithm <6>[ 2.043882] fbcon: Taking over console <6>[ 2.048885] ACPI: Added _OSI(Module Device) <6>[ 2.048888] ACPI: Added _OSI(Processor Device) <6>[ 2.048890] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 2.063566] Callback from call_rcu_tasks() invoked. <6>[ 2.636339] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 2.683362] ACPI: EC: EC started <6>[ 2.686617] ACPI: EC: interrupt blocked <6>[ 2.697387] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.702549] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 2.997548] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 3.013975] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 3.023749] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 3.030600] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 3.067989] ACPI: Interpreter enabled <6>[ 3.068637] ACPI: PM: (supports S0 S4 S5) <6>[ 3.069540] ACPI: Using IOAPIC for interrupt routing <6>[ 3.076006] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.077000] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.097686] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 3.098627] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 3.144138] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 3.144912] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 3.155284] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.530966] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.561327] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 3.727634] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 3.736929] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 3.757179] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 3.778949] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.785088] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.791097] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.028322] ACPI: \_TZ_.FN00: New power resource <6>[ 4.029187] ACPI: \_TZ_.FN01: New power resource <6>[ 4.035996] ACPI: \_TZ_.FN02: New power resource <6>[ 4.042325] ACPI: \_TZ_.FN03: New power resource <6>[ 4.048274] ACPI: \_TZ_.FN04: New power resource <6>[ 4.058043] ACPI: \PIN_: New power resource <6>[ 4.072130] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 4.078658] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 4.099517] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 4.109155] PCI host bridge to bus 0000:00 <6>[ 4.109713] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.110543] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.111542] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.112595] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 4.114184] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 4.114545] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.118655] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 4.120267] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 4.120758] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 4.121544] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 4.122546] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 4.123586] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.125965] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 4.126565] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 4.129202] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 4.129566] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 4.130543] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 4.132598] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 4.133583] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.134552] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 4.135587] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 4.136748] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.137614] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 4.143029] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 4.143583] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.144552] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.145588] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 4.146824] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 4.147606] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 4.152865] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 4.153616] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.154647] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.155559] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 4.156667] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 4.157635] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 4.162961] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 4.163604] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 4.164942] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.165797] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 4.166565] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 4.167546] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 4.169074] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.169589] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 4.170610] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.173285] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.173621] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 4.174975] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 4.175597] pci 0000:00:0d.2: supports D1 D2 <6>[ 4.176539] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.179024] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.179590] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 4.180544] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 4.181624] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.182582] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.184955] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 4.185622] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 4.186676] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.190216] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.190649] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 4.191658] pci 0000:00:13.0: PME# supported from D3hot <6>[ 4.193063] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.193590] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 4.194634] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.197652] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 4.198628] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 4.199753] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 4.200913] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.201636] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.213842] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.214617] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.226804] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.227614] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.239790] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.240615] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.252826] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.253624] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 4.254638] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.258157] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 4.258597] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.259606] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 4.260543] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 4.261665] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 4.262610] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 4.268356] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 4.268672] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.269647] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 4.270882] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 4.271739] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 4.277809] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 4.280652] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 4.281650] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 4.282578] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 4.283714] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.285084] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 4.285608] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 4.286584] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 4.289342] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.289719] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 4.291070] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.291768] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.292739] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.293779] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 4.294628] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 4.295546] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 4.296545] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 4.297722] pci 0000:7f:00.0: supports D1 D2 <6>[ 4.298539] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.300209] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 4.302722] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.304002] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 4.304756] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 4.306994] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 4.307804] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.734626] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 4.741645] Low-power S0 idle used by default for system suspend <6>[ 4.856936] ACPI: EC: interrupt unblocked <6>[ 4.857573] ACPI: EC: event unblocked <6>[ 4.859187] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 4.859836] ACPI: EC: GPE=0x6e <6>[ 4.860544] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 4.861582] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 4.863809] iommu: Default domain type: Translated <6>[ 4.864762] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 4.867764] SCSI subsystem initialized <7>[ 4.868791] libata version 3.00 loaded. <6>[ 4.868791] ACPI: bus type USB registered <6>[ 4.869661] usbcore: registered new interface driver usbfs <6>[ 4.870816] usbcore: registered new interface driver hub <6>[ 4.871588] usbcore: registered new device driver usb <6>[ 4.872950] pps_core: LinuxPPS API ver. 1 registered <6>[ 4.873540] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 4.874778] PTP clock support registered <6>[ 4.875825] EDAC MC: Ver: 3.0.0 <6>[ 4.877805] efivars: Registered efivars operations <6>[ 4.880157] NetLabel: Initializing <6>[ 4.880550] NetLabel: domain hash size = 128 <6>[ 4.881539] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 4.882614] NetLabel: unlabeled traffic allowed by default <6>[ 4.883551] mctp: management component transport protocol core <6>[ 4.884541] NET: Registered PF_MCTP protocol family <6>[ 4.885588] PCI: Using ACPI for IRQ routing <7>[ 4.904132] PCI: pci_cache_line_size set to 64 bytes <6>[ 4.904383] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 4.904798] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 4.905547] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 4.906542] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 4.907542] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 4.908542] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 4.910579] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 4.911535] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 4.911535] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 4.911558] vgaarb: loaded <7>[ 4.914110] Monitor-Mwait will be used to enter C-1 state <7>[ 4.914137] Monitor-Mwait will be used to enter C-2 state <7>[ 4.914141] Monitor-Mwait will be used to enter C-3 state <6>[ 4.923891] clocksource: Switched to clocksource tsc-early <5>[ 4.930803] VFS: Disk quotas dquot_6.6.0 <6>[ 4.934810] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 4.950137] AppArmor: AppArmor Filesystem Enabled <6>[ 4.955021] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 4.960386] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 4.965739] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 4.970479] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 4.975218] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 4.979959] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 4.984698] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 4.989439] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 4.994184] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 4.998933] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 5.004285] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 5.009727] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 5.015207] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 5.020034] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 5.025795] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 5.031942] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 5.038079] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 5.045006] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 5.051139] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 5.057268] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 5.064188] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 5.071106] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 5.078219] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 5.084351] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 5.090492] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 5.096622] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 5.102754] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 5.108895] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 5.115025] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 5.121164] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 5.127387] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 5.134309] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 5.141226] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 5.148909] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 5.155882] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 5.163213] pnp: PnP ACPI init <6>[ 5.232895] pnp: PnP ACPI: found 1 devices <6>[ 5.276450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 5.286026] NET: Registered PF_INET protocol family <6>[ 5.291345] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 5.304424] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 5.313753] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 5.321866] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 5.331417] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 5.342783] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 5.350180] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 5.358926] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 5.368305] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 5.374194] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 5.382723] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 5.391242] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 5.399855] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 5.406717] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 5.413596] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 5.420459] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 5.428236] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 5.436010] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 5.443775] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 5.451543] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 5.458468] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 5.463766] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 5.469948] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 5.477005] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 5.485242] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 5.490519] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 5.496675] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.503519] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 5.511671] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 5.516938] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 5.523087] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.529922] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 5.538074] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 5.543079] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 5.549212] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 5.556048] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 5.561083] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 5.567949] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 5.574172] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 5.580394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 5.587312] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 5.594226] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 5.601495] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 5.607113] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 5.613428] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 5.621056] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 5.626669] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 5.632982] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 5.640607] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 5.646227] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 5.652538] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 5.660166] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 5.665785] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 5.672099] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 5.679824] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 5.687887] PCI: CLS 0 bytes, default 64 <6>[ 5.692037] DMAR: No RMRR found <6>[ 5.695227] DMAR: No ATSR found <6>[ 5.698405] DMAR: dmar1: Using Queued invalidation <6>[ 5.703295] DMAR: dmar0: Using Queued invalidation <6>[ 5.708177] DMAR: dmar2: Using Queued invalidation <6>[ 5.714368] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 5.719600] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 5.724808] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 5.729986] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 5.739438] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 5.746622] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 5.751818] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 5.757013] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 5.762199] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 5.767422] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 5.772576] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 5.777727] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 5.782914] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 5.788191] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 5.793491] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 5.798734] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 5.804072] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 5.809312] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 5.814554] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 5.819793] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 5.825082] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 5.830339] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 5.835648] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 5.840946] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 5.846182] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 5.851416] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 5.856649] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 5.861911] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 5.867199] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 5.885465] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 5.891977] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 5.898464] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 5.912884] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 5.923307] clocksource: Switched to clocksource tsc <6>[ 5.928482] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 5.944802] Initialise system trusted keyrings <5>[ 5.949363] Key type blacklist registered <6>[ 5.953936] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 5.971908] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 5.977925] ntfs3: Enabled Linux POSIX ACLs support <6>[ 5.982848] ntfs3: Read-only LZX/Xpress compression included <5>[ 5.989269] integrity: Platform Keyring initialized <5>[ 5.994205] integrity: Machine keyring initialized <6>[ 6.005472] xor: automatically using best checksumming function avx <5>[ 6.012579] Key type asymmetric registered <5>[ 6.016717] Asymmetric key parser 'x509' registered <6>[ 6.021759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 6.029893] io scheduler mq-deadline registered <6>[ 6.037313] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 6.045164] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 6.051780] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 6.058869] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 6.065385] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 6.072529] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 6.078903] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 6.085874] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 6.092371] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 6.099826] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 6.106423] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 6.114553] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 6.123967] ACPI: button: Lid Switch [LID0] <6>[ 6.128710] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 6.136143] ACPI: button: Sleep Button [SLPB] <6>[ 6.140970] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 6.148254] ACPI: button: Power Button [PWRB] <6>[ 6.247899] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 6.253383] ACPI: thermal: Thermal Zone [TZ00] (36 C) <6>[ 6.260658] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 6.260873] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 6.264112] ACPI: battery: Slot [BAT0] (battery present) <6>[ 6.300384] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 6.337610] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 6.351384] hpet_acpi_add: no address or irqs in _CRS <6>[ 6.356818] Linux agpgart interface v0.103 <6>[ 6.362236] ACPI: bus type drm_connector registered <7>[ 6.368356] initcall simpledrm_platform_driver_init blacklisted <6>[ 6.390807] loop: module loaded <6>[ 6.441230] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 6.568280] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 6.694101] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 6.819848] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 6.946964] Key type psk registered <6>[ 6.952804] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 6.954168] tun: Universal TUN/TAP device driver, 1.6 <6>[ 6.959973] nvme nvme0: pci function 0000:80:00.0 <6>[ 6.965832] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 6.974642] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 6.984146] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 6.995769] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.001072] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 7.008550] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.011938] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 7.016094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 7.029193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.036463] usb usb1: Product: xHCI Host Controller <6>[ 7.039221] nvme0n1: p1 p2 <6>[ 7.041373] usb usb1: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4852-d873f0156bd08a303-debug+ xhci-hcd <6>[ 7.041375] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 7.042742] hub 1-0:1.0: USB hub found <6>[ 7.062245] hub 1-0:1.0: 1 port detected <6>[ 7.070562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 7.078898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.086169] usb usb2: Product: xHCI Host Controller <6>[ 7.091104] usb usb2: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4852-d873f0156bd08a303-debug+ xhci-hcd <6>[ 7.100376] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 7.105996] hub 2-0:1.0: USB hub found <6>[ 7.110024] hub 2-0:1.0: 3 ports detected <6>[ 7.140969] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.146279] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 7.155606] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.166809] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.172091] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 7.179538] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.186887] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 7.195204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.202498] usb usb3: Product: xHCI Host Controller <6>[ 7.207412] usb usb3: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4852-d873f0156bd08a303-debug+ xhci-hcd <6>[ 7.216683] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 7.222170] hub 3-0:1.0: USB hub found <6>[ 7.226030] hub 3-0:1.0: 8 ports detected <6>[ 7.261151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 7.269479] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.276748] usb usb4: Product: xHCI Host Controller <6>[ 7.281668] usb usb4: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4852-d873f0156bd08a303-debug+ xhci-hcd <6>[ 7.290938] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 7.296451] hub 4-0:1.0: USB hub found <6>[ 7.300314] hub 4-0:1.0: 2 ports detected <6>[ 7.311943] usbcore: registered new interface driver usb-storage <6>[ 7.318262] usbcore: registered new interface driver usbserial_generic <6>[ 7.325069] usbserial: USB Serial support registered for generic <6>[ 7.331259] usbcore: registered new interface driver ftdi_sio <6>[ 7.337646] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 7.345074] usbcore: registered new interface driver pl2303 <6>[ 7.350724] usbserial: USB Serial support registered for pl2303 <6>[ 7.356812] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 7.363645] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 8.085993] i8042: Can't read CTR while initializing i8042 <3>[ 8.091545] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 8.098534] mousedev: PS/2 mouse device common for all mice <6>[ 8.105219] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 8.112080] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 8.117040] rtc_cmos rtc_cmos: setting system clock to 2026-04-06T07:43:24 UTC (1775461404) <6>[ 8.125647] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 8.132705] i2c_dev: i2c /dev entries driver <6>[ 8.142216] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 8.150709] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 8.158237] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 8.170501] device-mapper: uevent: version 1.0.3 <6>[ 8.175500] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 8.184433] intel_pstate: Intel P-state driver initializing <6>[ 8.194410] Hybrid CPU capacity scaling enabled <6>[ 8.199357] processor cpu0: EM: created perf domain <6>[ 8.204675] processor cpu1: EM: created perf domain <6>[ 8.209842] processor cpu2: EM: created perf domain <6>[ 8.214926] processor cpu3: EM: created perf domain <6>[ 8.220110] processor cpu4: EM: created perf domain <6>[ 8.225207] processor cpu5: EM: created perf domain <6>[ 8.230301] processor cpu6: EM: created perf domain <6>[ 8.235390] processor cpu7: EM: created perf domain <6>[ 8.241494] intel_pstate: HWP enabled <6>[ 8.245190] sdhci: Secure Digital Host Controller Interface driver <6>[ 8.251415] sdhci: Copyright(c) Pierre Ossman <6>[ 8.255998] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 8.264098] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 8.276624] drop_monitor: Initializing network drop monitor service <6>[ 8.283317] NET: Registered PF_INET6 protocol family <6>[ 8.289598] Segment Routing with IPv6 <6>[ 8.293330] In-situ OAM (IOAM) with IPv6 <6>[ 8.297343] NET: Registered PF_PACKET protocol family <5>[ 8.302824] Key type dns_resolver registered <4>[ 8.312806] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 8.319570] microcode: Current revision: 0x00000124 <6>[ 8.325458] IPI shorthand broadcast: enabled <6>[ 8.344376] sched_clock: Marking stable (8149001330, 195050524)->(9725599768, -1381547914) <6>[ 8.355406] registered taskstats version 1 <5>[ 8.361122] Loading compiled-in X.509 certificates <6>[ 8.413912] Demotion targets for Node 0: null <6>[ 8.418672] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 8.418732] kmemleak: Automatic memory scanning thread started <5>[ 8.427196] Key type .fscrypt registered <5>[ 8.436759] Key type fscrypt-provisioning registered <6>[ 8.444916] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 8.452475] Key type encrypted registered <6>[ 8.456539] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 8.462251] ima: No TPM chip found, activating TPM-bypass! <5>[ 8.467799] Loading compiled-in module X.509 certificates <5>[ 8.474110] Loaded X.509 cert 'Build time autogenerated kernel key: f87a325cbbc94880a81968f471bc24578e409bae' <6>[ 8.484086] ima: Allocated hash algorithm: sha256 <6>[ 8.489027] ima: No architecture policies found <6>[ 8.493728] evm: Initialising EVM extended attributes: <6>[ 8.498910] evm: security.selinux <6>[ 8.502255] evm: security.SMACK64 <6>[ 8.505601] evm: security.SMACK64EXEC <6>[ 8.509293] evm: security.SMACK64TRANSMUTE <6>[ 8.513421] evm: security.SMACK64MMAP <6>[ 8.517117] evm: security.apparmor <6>[ 8.520553] evm: security.ima <6>[ 8.523553] evm: security.capability <6>[ 8.527162] evm: HMAC attrs: 0x1 <6>[ 8.532890] PM: Magic number: 6:861:722 <6>[ 8.536957] block loop2: hash matches <6>[ 8.540933] netconsole: network logging started <6>[ 8.546256] RAS: Correctable Errors collector initialized. <6>[ 8.552408] clk: Disabling unused clocks <6>[ 8.556384] PM: genpd: Disabling unused power domains <6>[ 8.561968] md: Waiting for all devices to be available before autodetect <6>[ 8.568815] md: If you don't use raid, use raid=noautodetect <6>[ 8.574511] md: Autodetecting RAID arrays. <6>[ 8.578649] md: autorun ... <6>[ 8.581471] md: ... autorun DONE. <6>[ 8.629525] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 8.641682] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 8.649110] devtmpfs: mounted <6>[ 8.652240] VFS: Pivoted into new rootfs <6>[ 8.674175] Freeing unused decrypted memory: 2036K <6>[ 8.679901] Freeing unused kernel image (initmem) memory: 5780K <6>[ 8.686624] Write protecting the kernel read-only data: 36864k <6>[ 8.693075] Freeing unused kernel image (text/rodata gap) memory: 680K <6>[ 8.699932] Freeing unused kernel image (rodata/data gap) memory: 516K <6>[ 8.711009] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 8.721315] Run /sbin/init as init process <7>[ 8.725460] with arguments: <7>[ 8.725461] /sbin/init <7>[ 8.725462] with environment: <7>[ 8.725463] HOME=/ <7>[ 8.725464] TERM=linux <7>[ 8.771238] systemd[1]: Inserted module 'autofs4' <7>[ 8.799485] systemd[1]: systemd 255.4-1ubuntu8.14 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 8.832421] systemd[1]: Detected architecture x86-64. <7>[ 8.844419] systemd[1]: Hostname set to . <7>[ 9.087886] systemd[1]: Queued start job for default target graphical.target. <7>[ 9.116934] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 9.137031] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. <7>[ 9.158046] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 9.178849] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 9.195400] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 9.216936] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 9.240201] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 9.261167] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... <7>[ 9.275181] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 9.294203] systemd[1]: Reached target slices.target - Slice Units. <7>[ 9.308178] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 9.325185] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 9.341199] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 9.360520] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 9.379782] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 9.398610] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 9.415705] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 9.431615] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 9.451476] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 9.470601] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 9.490658] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 9.515148] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 9.534538] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 9.549405] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 9.568403] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 9.596303] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 9.619903] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 9.631047] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 9.658293] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 9.682386] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 9.692946] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 9.710352] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 9.727710] systemd-journald[202]: Collecting audit messages is disabled. <7>[ 9.728466] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 9.757783] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 9.784738] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 9.804717] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 9.815005] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 9.832924] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 9.851612] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <6>[ 9.860784] pstore: Using crash dump compression: deflate <6>[ 9.867697] pstore: Registered efi_pstore as persistent store backend <7>[ 9.880925] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <6>[ 9.895000] fuse: init (API version 7.45) <7>[ 9.899667] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 9.922062] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 9.939545] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 9.955286] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 9.971777] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 9.990689] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 10.007996] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.327512] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 10.369957] Adding 8388604k swap on /swap.img. Priority:-1 extents:65 across:341704704k SS <7>[ 10.421613] systemd-journald[202]: Received client request to flush runtime journal. <7>[ 10.434591] systemd-journald[202]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.434611] systemd-journald[202]: Rotating system journal. <4>[ 10.915557] nvme nvme0: using unchecked data buffer <6>[ 11.053379] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.073762] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 11.077422] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.088703] intel-hid INTC107B:00: platform supports 5 button array <6>[ 11.095322] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 11.122441] ACPI: bus type thunderbolt registered <5>[ 11.296390] audit: type=1400 audit(1775461407.678:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=400 comm="apparmor_parser" <5>[ 11.296770] audit: type=1400 audit(1775461407.678:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=401 comm="apparmor_parser" <5>[ 11.297948] audit: type=1400 audit(1775461407.679:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=402 comm="apparmor_parser" <5>[ 11.298561] audit: type=1400 audit(1775461407.680:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=403 comm="apparmor_parser" <5>[ 11.302009] audit: type=1400 audit(1775461407.683:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=404 comm="apparmor_parser" <5>[ 11.305476] audit: type=1400 audit(1775461407.687:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=405 comm="apparmor_parser" <5>[ 11.306622] audit: type=1400 audit(1775461407.688:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=406 comm="apparmor_parser" <5>[ 11.310262] audit: type=1400 audit(1775461407.692:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=407 comm="apparmor_parser" <5>[ 11.312697] audit: type=1400 audit(1775461407.694:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=408 comm="apparmor_parser" <5>[ 11.312947] audit: type=1400 audit(1775461407.694:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=409 comm="apparmor_parser" <3>[ 11.327371] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 11.334379] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 11.361485] pci 0000:00:05.0: Setting to D3hot <6>[ 11.386935] pci 0000:00:0b.0: Setting to D3hot <6>[ 11.398658] intel_pmc_core INT33A1:00: initialized <6>[ 11.638681] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 11.648969] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 11.648975] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 11.658279] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 11.684826] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 11.718369] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 11.723153] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 11.738089] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 11.749848] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 11.810763] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 11.817743] intel_rapl_common: Found RAPL domain package <6>[ 11.817749] intel_rapl_common: Found RAPL domain dram <6>[ 11.845345] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 191 <6>[ 11.845352] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 11.914716] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 11.914721] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 11.914722] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 11.914724] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 11.914724] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 11.934301] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 11.935502] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 11.985749] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 11.997705] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.099873] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.100325] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 12.126703] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 12.126709] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 12.126711] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 12.306926] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.311695] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.424004] intel_rapl_common: Found RAPL domain package <6>[ 12.424010] intel_rapl_common: Found RAPL domain core <6>[ 12.424014] intel_rapl_common: Found RAPL domain dram <6>[ 12.424016] intel_rapl_common: Found RAPL domain psys <6>[ 12.456933] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.490040] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 12.504073] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 12.506147] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 12.523413] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 12.523440] 0x000000000000-0x000002000000 : "BIOS" <6>[ 12.533320] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.558156] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 12.569362] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.717501] r8169 0000:7f:00.0 enp127s0: Link is Down <4>[ 12.721346] block nvme0n1: No UUID available providing old NGUID <6>[ 13.128262] hid: raw HID events driver (C) Jiri Kosina <6>[ 13.136964] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 13.176748] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.187026] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.189476] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.191067] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.193499] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.194003] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.195871] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.197495] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.198632] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.200285] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.203650] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.208072] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.210821] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.214687] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.215721] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.218745] loop0: detected capacity change from 0 to 8 <6>[ 13.220813] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.223803] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.227159] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.230211] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.233251] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.236887] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.240550] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.242025] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.245908] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.404389] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.410888] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.418387] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.423457] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.429907] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.435387] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.441676] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.449593] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.454849] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.457826] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.462471] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.467573] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.473365] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.481035] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.487071] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.492552] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.498578] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.505178] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.513989] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.522972] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.719910] Consider using thermal netlink events interface <6>[ 14.428272] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 14.428302] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 14.428334] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 15.389045] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 15.389077] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 15.389106] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 16.300132] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <7>[ 20.958161] systemd-journald[202]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 23.708190] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 23.710157] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 52.300515] [IGT] xe_module_load: executing <4>[ 52.300608] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.306018] [IGT] xe_module_load: starting subtest load <5>[ 52.617781] Setting dangerous option force_probe - tainting kernel <6>[ 52.621150] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 52.622444] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 52.622960] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.622971] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.623107] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.623239] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.626042] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.626233] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.626374] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.626495] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.626605] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.626702] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.626788] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.626872] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.626954] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.627053] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.627176] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.627316] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.627432] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.627536] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.627647] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.627768] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.627883] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.627995] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.628122] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.628259] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.628385] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.628483] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.628582] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.628678] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.628774] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.628871] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.628965] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.629064] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.629184] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.629307] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.629417] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.629511] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.629605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.629697] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.629790] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.629883] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.629975] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.630108] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.630228] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.630347] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.630447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.630535] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.630632] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.631036] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.631216] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.631373] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.631496] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.631623] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.631751] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.631877] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 52.632000] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.632146] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.632302] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.632427] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.632531] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.632635] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.632741] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.632847] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.632947] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.633046] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.633175] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.633311] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.633426] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.633527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.633627] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.633733] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.633830] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.633925] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.634020] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.634141] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.634296] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.634468] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.634618] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.634978] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.635171] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.635347] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.635460] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.635568] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.635710] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 52.635820] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.635949] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.636069] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.636221] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.636364] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.636478] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.636578] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.636806] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.636905] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.637418] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.637866] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.638013] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.638140] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.638257] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.638368] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.638459] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.638550] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.638638] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.638724] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.638808] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.638890] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.638971] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.639050] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.639227] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.641742] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.641879] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.642004] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.642156] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.642299] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.642441] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.642588] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.642840] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.643119] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.643391] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.643657] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.643912] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.644286] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.644529] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.644783] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.645024] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.645409] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.645696] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.645929] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.646182] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.646415] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.646643] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.646888] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.647111] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.647321] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.647528] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.647737] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.647942] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.648319] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.648578] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.654993] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6>[ 52.659858] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.661687] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.661828] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.661958] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.662122] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:392:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.662308] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:392:DDI A/PHY A] <7>[ 52.662524] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.662678] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.662857] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.663047] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.663282] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.663459] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.663626] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.663739] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.663845] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.663972] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:392:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.664115] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.664267] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.664399] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.664497] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.664593] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.664722] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.664870] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.666078] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.666250] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 52.692099] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.705093] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.729082] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.765078] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.777077] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.838098] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.186114] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.186128] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.186131] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.186132] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.186137] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.186140] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.186141] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 53.186146] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.186147] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 53.186150] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.186185] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.186187] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.186188] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.186202] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.186335] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.198079] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:393:eDP-1] Performing OUI wait (0 ms) <7>[ 53.210084] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 53.210206] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] AUX Backlight Control Supported! <7>[ 53.210317] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Using VESA eDP backlight controls <7>[ 53.210426] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:393:eDP-1] DRRS type: seamless <7>[ 53.222084] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 53.222102] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 53.222220] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 53.222339] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 53.222454] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using AUX VESA interface for backlight control <7>[ 53.222564] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:393:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 53.222727] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.222842] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.222955] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.223051] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.223162] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.223286] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.223498] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:401:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 53.223685] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.223818] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:401:DDI TC1/PHY TC1] <7>[ 53.224180] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:413:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 53.224323] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.224449] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:413:DDI TC2/PHY TC2] <7>[ 53.224687] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:421:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 53.224817] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.224937] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:421:DDI TC3/PHY TC3] <7>[ 53.225301] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 53.225430] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 53.225849] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7>[ 53.225974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled <7>[ 53.226106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled <7>[ 53.226214] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7>[ 53.226319] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7>[ 53.226415] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7>[ 53.226509] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7>[ 53.226602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7>[ 53.226694] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7>[ 53.226784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B <7>[ 53.226873] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B <7>[ 53.226962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B <7>[ 53.227051] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B <7>[ 53.227161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B <7>[ 53.227259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B <7>[ 53.227354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C <7>[ 53.227443] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C <7>[ 53.227530] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C <7>[ 53.227618] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C <7>[ 53.227704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C <7>[ 53.227789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C <7>[ 53.228868] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 53.228988] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:392:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 53.229101] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.229201] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 53.229300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.229395] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.229481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.229571] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.229660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 53.229744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.229827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.229909] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:417:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.229994] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.230085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 53.230174] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.230263] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.230351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:425:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.231370] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 53.231473] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 53.231575] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.231673] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 53.231774] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.231873] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.231972] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.232079] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.232203] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:393:eDP-1] hw state readout: enabled <7>[ 53.232324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:402:DP-1] hw state readout: disabled <7>[ 53.232441] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:414:DP-2] hw state readout: disabled <7>[ 53.232548] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:422:DP-3] hw state readout: disabled <7>[ 53.232710] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 173855 kHz <7>[ 53.232813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7>[ 53.232914] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7>[ 53.233006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7>[ 53.233108] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7>[ 53.233200] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7>[ 53.233291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 173855 kHz <7>[ 53.233381] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz <7>[ 53.233464] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz <7>[ 53.233543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz <7>[ 53.233623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz <7>[ 53.233701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz <7>[ 53.233779] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz <7>[ 53.233855] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz <7>[ 53.233931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz <7>[ 53.234007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz <7>[ 53.234091] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz <7>[ 53.234181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz <7>[ 53.234271] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz <7>[ 53.234361] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz <7>[ 53.234445] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz <7>[ 53.234675] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 53.234757] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.234838] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.234916] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 53.235025] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 53.235150] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 53.235298] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 53.235420] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 53.235682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7>[ 53.235805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.235914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 53.236017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.236137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.236247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.236356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.236462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 53.236560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.236655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.236750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.236845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 53.236940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 53.237035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 53.237144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.237256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 53.237357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 53.237457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.237548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 53.237646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.237748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.237855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.237959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.238061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.238166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 53.238269] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.238370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.238461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 53.238553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.238643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.238732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.238822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.238911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.238998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.239094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.239190] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.239286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.239380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.239470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.239557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.239643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.239727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.239818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 53.239913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.240007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.240121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.240220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.240316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.240411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.240499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.240584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.240671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.240756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.240841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.240926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state] <7>[ 53.241011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state] <7>[ 53.241110] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 53.241402] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 53.241508] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 53.241510] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6>[ 53.255612] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 53.261912] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.262041] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 53.262166] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 53.262262] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.262354] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.262443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.262524] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.262601] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.262676] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.262751] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.262824] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.262896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.262967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.263040] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.263134] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.263258] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 53.274145] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.274987] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.275230] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000000df <7>[ 53.275344] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000000df <7>[ 53.275438] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 53.275518] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 53.275593] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.914660] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.914663] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.914664] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.914830] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.914961] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 53.915093] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 53.915208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.915325] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.915433] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.915569] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.915707] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.915850] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.915956] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.916069] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.916175] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.917260] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.917394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.917522] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.917623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.917721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.917819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.917914] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.918010] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.918121] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.918239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.918359] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.918466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.918556] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.918646] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.918736] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.918829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.918920] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.919009] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.919112] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.919209] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.919306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.919402] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.919486] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.919567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.919647] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.919727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.919816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.919906] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.919994] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.920091] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 53.920183] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 53.920282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 53.920380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 53.920471] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 53.920558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.920645] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.920734] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.920824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.920913] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.921004] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.921105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.921199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.921546] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.921627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.921707] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.921787] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.922108] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.922209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.922303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.922396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.922707] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.922799] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.922883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.922961] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.923040] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.923133] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.923221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.923746] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.923887] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.923972] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.924062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.924152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.924241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.924323] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.924404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.924477] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.924547] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.924617] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.924687] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.924755] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.924823] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.924892] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.924983] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.925149] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.926625] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.929541] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.946205] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 53.957168] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.957566] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.958896] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 53.959093] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.959235] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.959368] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.959481] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.959591] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.959694] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.959798] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.959903] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 53.963774] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.963947] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.964114] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.966759] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.966915] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.973049] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 53.982263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.982526] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.982723] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.982907] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.983089] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.983260] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.983421] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.983581] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.983734] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.983883] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.984031] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.984226] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.984365] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.984502] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.986157] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.988342] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.989488] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.989620] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.989762] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 54.011105] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.011859] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.012347] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 54.012742] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 54.013142] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 54.013540] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 54.013910] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 54.014290] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 54.014297] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 54.014301] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 54.014305] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 54.014309] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 54.014312] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 54.014316] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 54.014321] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 54.014326] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 54.014330] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 54.014663] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 54.015072] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 54.015471] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 54.015861] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 54.016259] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 54.016635] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 54.016981] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 54.017336] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 54.017648] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 54.017936] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 54.018473] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 54.018737] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 54.018985] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 54.019295] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 54.019525] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 54.019749] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 54.019958] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 54.020219] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 54.020414] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 54.020610] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 54.020864] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 54.022349] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 54.022524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 54.022696] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 54.022854] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 54.023005] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 54.023166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 54.023309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 54.023447] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 54.023584] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 54.023709] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 54.023828] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 54.023950] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 54.024079] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 54.024220] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.024357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.024474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.024590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.024706] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.024819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.024929] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.025035] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.025157] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.025264] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.025369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.025463] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.025556] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.025650] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.025737] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.025825] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.025910] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 54.026003] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 54.026108] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 54.026209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 54.026304] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 54.026395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 54.026482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 54.026569] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 54.026655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 54.026742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 54.026830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 54.026915] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 54.027368] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 54.027465] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 54.027548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 54.027629] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 54.027709] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 54.027788] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 54.027865] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 54.027943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 54.028019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 54.028110] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 54.028194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 54.028278] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 54.028693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 54.028781] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 54.028865] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 54.029422] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 54.029547] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 54.029630] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.029711] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 54.029790] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.029869] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 54.029946] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.030024] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.030116] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.030202] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.030285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.030366] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.030440] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.030513] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.030584] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 54.030673] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 54.030785] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 54.032201] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.054581] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 54.075940] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.076641] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.078968] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 54.079327] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.084212] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 54.084554] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.090225] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 54.090535] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.135103] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 54.136406] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.136950] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.137502] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.138029] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.139114] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 54.139544] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 54.139961] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 54.142142] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7>[ 54.142682] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7>[ 54.143215] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7>[ 54.143742] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7>[ 54.144253] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7>[ 54.144722] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008 <7>[ 54.145203] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108 <7>[ 54.145705] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208 <7>[ 54.146174] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308 <7>[ 54.146613] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8 <7>[ 54.147050] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008 <7>[ 54.147587] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108 <7>[ 54.147976] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208 <7>[ 54.148430] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308 <7>[ 54.148773] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8 <7>[ 54.149598] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 54.149910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 54.150257] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 54.150633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset] <7>[ 54.151026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset] <7>[ 54.152645] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 54.152871] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 54.165414] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7>[ 54.166151] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C] <7>[ 54.179778] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:393:eDP-1] adding connector to sysfs <7>[ 54.188365] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:393:eDP-1] backlight device intel_backlight registered <7>[ 54.188932] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 54.189398] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Panel prepare <7>[ 54.190664] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 54.194090] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:393:eDP-1] generating connector hotplug event <7>[ 54.194268] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:402:DP-1] adding connector to sysfs <7>[ 54.195590] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 54.197886] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:402:DP-1] generating connector hotplug event <7>[ 54.198009] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:414:DP-2] adding connector to sysfs <7>[ 54.199263] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 54.201178] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:414:DP-2] generating connector hotplug event <7>[ 54.201291] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:422:DP-3] adding connector to sysfs <7>[ 54.202513] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 54.203999] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:422:DP-3] generating connector hotplug event <6>[ 54.204085] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 54.204168] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 54.222992] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 54.228906] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7>[ 54.231948] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 54.231959] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 54.232328] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 54.232530] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 54.234814] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7>[ 54.234974] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping <7>[ 54.235111] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping <7>[ 54.235227] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 54.235600] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.236041] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 54.236322] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 54.236872] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.237687] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.237872] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.238031] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.238694] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.238703] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.238705] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.238707] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.238711] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.238714] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.238717] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 54.238726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.238728] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 54.238732] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.238787] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 54.238937] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.239102] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.239535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] status updated from unknown to connected <5>[ 54.239746] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.239748] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.239750] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.239811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 54.239816] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.239820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.239824] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 54.239828] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 54.239981] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.240195] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] status updated from unknown to disconnected <7>[ 54.240200] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 54.240204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 54.240208] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 54.240367] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.240490] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] status updated from unknown to disconnected <7>[ 54.240493] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 54.240496] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 54.240498] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 54.240622] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.240728] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] status updated from unknown to disconnected <7>[ 54.240731] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 54.240734] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 54.240737] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 54.240739] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 54.240740] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 54.240813] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.240831] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 54.240833] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 54.240850] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.240958] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 54.241000] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 54.240998] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 54.241302] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <6>[ 54.241382] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <6>[ 54.241539] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 54.241476] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 54.242564] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 54.244405] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 54.249359] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 54.250438] fbcon: xedrmfb (fb0) is primary device <7>[ 54.251417] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 54.251602] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 54.251757] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 54.251923] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 54.252082] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7>[ 54.252238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 54.252395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7>[ 54.252549] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 54.252699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.252844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 54.252991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.253139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.253276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.253410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.253544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.253677] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.253809] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.253941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.254352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.254481] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 54.254606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.254720] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 54.254846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.254971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.255132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.255265] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.255397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.255526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.255651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.255758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.255868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 54.255992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 54.256126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 54.256246] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7>[ 54.256368] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7>[ 54.256541] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 54.256675] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 54.256812] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 54.256933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 54.257048] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 54.257176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.257290] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.257403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.257527] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.257653] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.257766] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.257871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.257976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.258183] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258392] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258503] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.258598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258695] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.258882] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.258974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.259072] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.259170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.259293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1 <7>[ 54.259439] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 54.259579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 54.259719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.259842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.259961] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 54.260162] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7>[ 54.260316] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 54.260472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7>[ 54.260604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.260718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 54.260829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.260941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.261053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.261200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.261331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 54.261464] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.261594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.261704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.261818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 54.261943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 54.262072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 54.262197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 54.262319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 54.262440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 54.262561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 54.262678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 54.262790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 54.262909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.263026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 54.263158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 54.263275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.263392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 54.263509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.263627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.263731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.263853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.263974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.264102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 54.264218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.264336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.264453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 54.264569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.264683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.264797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.264910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.265025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 54.265251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.265367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 54.265340] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 54.265467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.265577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.265694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.265813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.265913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.266010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.266126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 54.266224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.266325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.266439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.266550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.266663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.266771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.266864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.266956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.267050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.267187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.267301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.267420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 54.267541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 54.267651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 54.267750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7>[ 54.267847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7>[ 54.267943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7>[ 54.268037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7>[ 54.268156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7>[ 54.281641] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 54.281883] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 54.490175] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7>[ 54.491953] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.499473] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.499880] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.500370] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.500480] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 54.500920] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.552982] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.553525] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 54.561113] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.561670] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.561715] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7>[ 54.562349] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.563231] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 54.564296] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.565522] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.566298] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7>[ 54.566781] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7>[ 54.567296] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7>[ 54.567803] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7>[ 54.568279] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7>[ 54.568786] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7>[ 54.569257] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7>[ 54.569878] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7>[ 54.570330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7>[ 54.570795] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7>[ 54.571234] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7>[ 54.571634] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7>[ 54.572028] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7>[ 54.572603] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.574257] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7>[ 54.574785] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 54.577437] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.577781] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (484 ms remaining) <7>[ 54.587081] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.587602] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 54.588106] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.588637] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.677148] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 55.065296] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 55.136924] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.137431] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 55.137894] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 55.173711] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.174111] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 55.174492] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 55.175205] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 55.258272] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.258272] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.258337] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.345924] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.346511] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.346992] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 55.349313] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.350878] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 55.351924] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 55.353360] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 55.354899] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 55.356169] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 55.356660] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 55.358438] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 55.359097] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 55.360141] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 55.360871] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 55.361482] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 55.362129] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <7>[ 55.377802] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 55.380281] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7>[ 55.380920] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7>[ 55.382887] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 55.384859] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 55.386875] Console: switching to colour frame buffer device 180x56 <7>[ 55.386666] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 55.387533] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:393:eDP-1] set backlight level = 13892 <7>[ 55.388149] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892 <6>[ 55.418636] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.418675] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.421557] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.422789] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.423458] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.424087] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.424773] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.425416] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.426158] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.426773] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.427556] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.428153] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.428748] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.429391] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.430041] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.430639] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.431180] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.431651] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.432145] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.432603] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.432999] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.433422] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.433778] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.435050] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.435372] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.435695] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.435972] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 55.436291] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.436599] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 55.436879] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.437119] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 55.437367] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 55.440892] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.442306] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.442313] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 55.445028] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.445096] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <6>[ 55.445094] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.445812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 55.445835] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 55.446014] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 55.446304] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.447241] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.447644] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.448027] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.448492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.448990] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.448998] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.449000] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.449001] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.449006] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.449009] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.449011] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 55.449022] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.449024] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 55.449028] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.449054] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 55.449245] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.449397] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.449939] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.449940] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.449942] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.449997] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 55.450005] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.450008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.450012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 55.450016] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 55.450274] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.450418] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.450528] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.450675] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.450786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 55.450790] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 55.450793] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 55.450926] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.451028] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 55.451031] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 55.451034] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 55.451458] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 55.451420] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.451527] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 55.451530] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 55.451533] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 55.451535] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 55.451537] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 55.451653] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.451669] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 55.451671] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.451699] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.452179] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.452186] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 55.453089] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.453222] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.461948] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.479153] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.479459] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.479661] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.496006] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.496264] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.497394] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.497503] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.497594] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.497683] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.497769] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.497854] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.497937] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.498019] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.498134] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.498243] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.498349] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.498437] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.498518] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.498599] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.498679] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.498758] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.498836] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.498912] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.498988] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.499071] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.499169] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.499269] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.499368] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.499448] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.499524] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.499601] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.499675] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.499755] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.499835] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.499908] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.499980] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.500051] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.500158] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.500253] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.500347] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.500427] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 55.506269] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 55.507689] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 55.510766] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <7>[ 55.512513] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.512668] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.512934] [IGT] xe_module_load: exiting, ret=0 <6>[ 55.517501] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 55.529296] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.529497] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.529641] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.473188] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.473201] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.473233] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.639537] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 58.010756] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off <7>[ 58.011319] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067