igt@xe_pm@d3hot-mmap-vram on shard-bmg@IGT

Detail	Value
Duration	13.90 seconds
Hostname	shard-bmg-9
Igt-Version	IGT-Version: 2.4-g7f3362137 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4849-1f2d2058e732e5b15-debug+ x86_64)
Out	Using IGT_SRANDOM=1775261719 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.898s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.898s)
Dmesg	<6> [309.257641] Console: switching to colour dummy device 80x25 <6> [309.257925] [IGT] xe_pm: executing <6> [310.356793] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [310.359420] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [310.359535] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [310.359632] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [310.359722] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [310.359812] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [310.359901] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [310.359988] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [310.360185] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [310.360272] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [310.360357] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [310.360442] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [310.360530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [310.360619] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [310.360706] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [310.360815] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [310.360886] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [310.360964] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [310.361122] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [310.361210] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [310.361297] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [310.361383] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [310.361468] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [310.361553] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [310.361636] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [310.361728] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [310.361798] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [310.361872] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [310.361965] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [310.362042] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [310.362114] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [310.362179] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [310.362245] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [310.362308] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [310.362371] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [310.362433] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [310.362510] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [310.362599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [310.362685] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [310.362770] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [310.362868] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [310.362969] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [310.363066] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [310.363161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [310.363251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [310.363340] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [310.363427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [310.363511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [310.363593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [310.363673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [310.363753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [310.363832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [310.363912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [310.363990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [310.364108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [310.364194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [310.364274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [310.364353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [310.364433] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [310.364512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [310.364592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [310.364673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [310.364754] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [310.364836] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [310.364915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [310.364995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [310.365096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [310.365181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [310.365261] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [310.365341] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [310.365421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [310.365500] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [310.365580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [310.365658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [310.365737] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [310.365816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [310.365895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [310.365974] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [310.366064] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [310.366150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [310.366231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [310.366310] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [310.366389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [310.366469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [310.366548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [310.366627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [310.366706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [310.366785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [310.366865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [310.366944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [310.367035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [310.367124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [310.367212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [310.367300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [310.367388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [310.367474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [310.367558] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.367637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.367716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.367795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [310.367874] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [310.367954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.368083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.368169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.368249] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [310.368330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [310.368410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [310.368489] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [310.368568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [310.368647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [310.368725] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [310.368804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [310.369634] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A] <7> [310.388640] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [310.389456] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [310.405233] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [310.407137] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [310.409187] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [310.409659] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [310.409840] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [310.410026] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [310.410200] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [310.410379] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [310.410551] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [310.410720] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [310.410894] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [310.411093] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [310.411282] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [310.411466] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [310.411653] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [310.411836] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [310.412020] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [310.412205] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [310.412376] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [310.413243] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [310.414019] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [310.414408] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [310.414750] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [310.427497] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [310.428173] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [310.428795] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [310.429415] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [310.430750] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [310.431132] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [310.431466] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [310.431780] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [310.432118] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [310.432407] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [310.432843] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [310.433138] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [310.433400] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [310.433660] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [310.433908] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [310.434178] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [310.434515] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [310.434738] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [310.434957] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [310.435215] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [310.435447] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [310.435659] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [310.435898] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [310.436081] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [310.436281] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [310.436429] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [310.436571] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [310.436710] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [310.436848] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [310.436979] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [310.437168] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [310.437346] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [310.437511] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [310.437671] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [310.437845] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [310.438031] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3 <7> [310.438175] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3 <7> [310.438316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset] <7> [310.438471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [310.438622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [310.438764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [310.438902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [310.439044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [310.439190] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [310.439318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [310.439445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [310.439569] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [310.439572] xe 0000:03:00.0: colorspace: RGB <7> [310.439574] xe 0000:03:00.0: scan mode: Underscan <7> [310.439576] xe 0000:03:00.0: colorimetry: No Data <7> [310.439577] xe 0000:03:00.0: picture aspect: No Data <7> [310.439579] xe 0000:03:00.0: active aspect: Same as Picture <7> [310.439581] xe 0000:03:00.0: itc: No Data <7> [310.439582] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [310.439584] xe 0000:03:00.0: quantization range: Full <7> [310.439586] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [310.439587] xe 0000:03:00.0: video code: 0 <7> [310.439589] xe 0000:03:00.0: ycc quantization range: Full <7> [310.439591] xe 0000:03:00.0: hdmi content type: Graphics <7> [310.439592] xe 0000:03:00.0: pixel repeat: 0 <7> [310.439594] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [310.439596] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [310.439598] xe 0000:03:00.0: vendor: Intel <7> [310.439600] xe 0000:03:00.0: product: Discrete gfx <7> [310.439602] xe 0000:03:00.0: source device information: PC General (0x9) <7> [310.439604] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [310.439606] xe 0000:03:00.0: empty frame <7> [310.439607] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 6d 10 00 01 00 00 00 00 00 00 00 00 <7> [310.439726] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 24 96 11 ed 41 4f 43 32 38 45 38 35 30 2e 48 44 <7> [310.439839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 52 09 07 07 <7> [310.439951] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [310.440075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [310.440191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [310.440299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [310.440405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [310.440511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [310.440618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [310.440720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [310.440823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [310.440921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [310.441034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [310.441130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [310.441223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [310.441316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [310.441406] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [310.441497] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [310.441587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [310.441677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [310.441768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [310.441857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [310.441946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [310.442048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [310.442138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [310.442227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [310.442315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [310.442405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [310.442494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [310.442584] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [310.442674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [310.442765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [310.442856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [310.442947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [310.443048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [310.443141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [310.443231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [310.443321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [310.443410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.443499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.443588] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.443677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [310.443766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [310.443854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.443943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.444047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.444138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [310.444228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [310.444319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [310.444407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no <7> [310.444495] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no <7> [310.444586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no <7> [310.444674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no <7> [310.444763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no <7> [310.445426] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe B] <7> [310.477432] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [310.478584] xe 0000:03:00.0: [drm:intel_hdmi_handle_sink_scrambling [xe]] [CONNECTOR:539:HDMI-A-3] scrambling=no, TMDS bit clock ratio=1/10 <7> [310.479446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1) <7> [310.479800] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [310.480528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1) <7> [310.480845] xe 0000:03:00.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:539:HDMI-A-3] Failed to read TMDS config: -6 <7> [310.480886] xe 0000:03:00.0: [drm:intel_ddi_disable [xe]] [CONNECTOR:539:HDMI-A-3] Failed to reset sink scrambling/TMDS bit clock ratio <7> [310.481747] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [310.491089] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [310.495182] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:269:pipe B] <7> [310.497761] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [310.498457] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [310.498937] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [310.499445] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [310.499885] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [310.500308] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [310.500673] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [310.501021] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [310.501341] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [310.501653] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [310.501971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [310.502327] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [310.502634] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [310.502912] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [310.503222] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [310.503509] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [310.503784] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [310.504296] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [310.504736] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [310.505172] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [310.505903] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [310.506377] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [310.506627] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [310.507067] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [310.507277] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7> [310.513083] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [310.513603] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [310.514107] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [310.514610] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [310.515111] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [311.772246] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [311.772858] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [311.777523] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [311.782217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [311.782706] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [311.783429] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [311.784125] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [311.787870] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [311.801193] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [311.804190] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [311.806203] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [311.812182] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [311.814208] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [311.830675] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [311.830910] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [311.831257] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [311.836309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.838080] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.839911] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.841747] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.843720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.845696] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.847562] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.849434] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.853097] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.854920] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.856757] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.858767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.860770] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.862776] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.864794] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.866675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [311.868457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [311.868476] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [311.868486] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [311.868496] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [311.868506] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [311.868517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [311.868530] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [311.868542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [311.868554] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [311.868603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [311.868921] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [311.870340] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [311.870616] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [311.871900] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [311.872449] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [311.872539] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [311.872867] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [311.872952] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [311.872956] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [311.873049] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [311.874285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [311.874288] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [311.874375] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [311.899379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [311.899384] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [311.899387] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [311.899390] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [311.899393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [311.899396] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [311.899400] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [311.899404] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [311.899408] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [311.899670] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [311.899771] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [311.900111] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [311.900197] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [311.900209] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [311.904444] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [311.976224] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [311.977056] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [311.977723] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [311.978374] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [311.978976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [313.194777] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [313.195493] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [313.200353] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [313.205046] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [313.205794] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [313.206727] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [313.207645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [313.211889] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [313.226423] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [313.228832] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [313.230825] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [313.236309] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [313.238116] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [313.249386] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [313.249598] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [313.249802] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [313.256174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.258217] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.260236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.262269] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.264290] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.266350] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.268409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.270392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.274468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.276448] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.278415] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.280432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.282435] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.284447] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.286387] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.288468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [313.290134] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [313.290149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [313.290156] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [313.290162] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [313.290168] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [313.290175] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [313.290182] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [313.290190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [313.290197] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [313.290224] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [313.290424] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [313.294975] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [313.295153] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [313.296726] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [313.297238] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [313.297335] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [313.297770] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [313.297856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [313.297859] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [313.297943] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [313.300627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [313.300631] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [313.300720] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [313.325689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [313.325693] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [313.325696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [313.325699] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [313.325702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [313.325705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [313.325710] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [313.325713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [313.325717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [313.326082] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [313.326166] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [313.326597] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [313.326679] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [313.326690] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [313.330843] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [313.400260] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [313.401240] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [313.402360] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [313.403246] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [313.404083] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [314.521103] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [314.521789] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [314.526476] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [314.531187] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [314.531724] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [314.532389] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [314.533205] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [314.537839] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [314.551882] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [314.554125] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [314.555980] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [314.560098] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [314.561590] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [314.570769] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [314.570914] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [314.571070] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [314.577199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.579198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.581202] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.583195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.585197] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.587205] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.589184] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.591196] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.595153] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.597174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.599195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.601220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.603239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.605251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.607270] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.609427] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [314.611137] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [314.611151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [314.611157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [314.611162] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [314.611167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [314.611172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [314.611179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [314.611185] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [314.611192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [314.611216] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [314.611396] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [314.613085] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [314.613302] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [314.614959] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [314.615547] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [314.615682] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [314.616168] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [314.616297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [314.616303] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [314.616432] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [314.617844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [314.617849] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [314.617983] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [314.643091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [314.643096] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [314.643100] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [314.643103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [314.643106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [314.643109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [314.643113] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [314.643116] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [314.643120] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [314.643487] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [314.643582] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [314.644032] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [314.644192] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [314.644213] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [314.648757] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [314.720296] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [314.721287] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [314.722115] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [314.723094] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [314.723946] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [316.045678] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [316.046359] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [316.051173] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [316.055727] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [316.056455] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [316.057237] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [316.058108] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [316.062806] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [316.077131] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [316.079537] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [316.081203] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [316.086634] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [316.088625] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [316.098687] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [316.098897] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [316.099112] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [316.105295] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.107314] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.109333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.111260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.113265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.115278] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.117290] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.119308] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.123484] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.125411] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.127426] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.129476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.131476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.133480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.135481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.137400] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [316.139242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [316.139257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [316.139265] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [316.139271] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [316.139277] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [316.139283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [316.139291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [316.139299] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [316.139306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [316.139333] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [316.139551] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [316.141283] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [316.141461] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [316.143024] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [316.143940] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [316.144030] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [316.144292] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [316.144381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [316.144385] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [316.144470] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [316.145814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [316.145818] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [316.145903] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [316.170873] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [316.170877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [316.170880] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [316.170883] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [316.170886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [316.170889] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [316.170893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [316.170897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [316.170901] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [316.171272] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [316.171358] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [316.171790] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [316.171890] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [316.171904] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [316.176128] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [316.248285] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [316.249256] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [316.250071] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [316.250793] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [316.251563] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <6> [317.023273] xe 0000:03:00.0: [drm] PL2 disabled for channel 0, val 0x00000000 <7> [318.169076] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [318.169823] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [318.174661] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [318.179315] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [318.179923] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [318.180777] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [318.181586] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [318.185162] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [318.195788] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [318.197618] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [318.199108] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [318.203187] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [318.204587] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [318.213982] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [318.214416] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [318.214531] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [318.220556] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.222527] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.224361] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.226208] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.228236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.230250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.232108] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.233938] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.237826] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.239818] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.241830] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.243832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.245692] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.247680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.249540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.251371] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [318.252953] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [318.252966] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [318.252979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [318.252990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [318.253001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [318.253012] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [318.253026] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [318.253062] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [318.253078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [318.253126] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [318.253391] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [318.254697] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [318.254993] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [318.256270] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [318.256795] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [318.256883] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [318.257214] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [318.257299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [318.257303] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [318.257387] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [318.258629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [318.258632] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [318.258720] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [318.283578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [318.283583] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [318.283586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [318.283589] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [318.283592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [318.283596] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [318.283600] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [318.283603] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [318.283607] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [318.283863] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [318.283958] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [318.284297] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [318.284383] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [318.284394] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [318.288554] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [318.360217] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [318.360991] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [318.361715] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [318.362340] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [318.362932] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [319.692246] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [319.693042] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [319.697792] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [319.702393] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [319.703010] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [319.703905] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [319.704751] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [319.708183] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [319.718885] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [319.720709] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [319.722188] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [319.726156] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [319.727534] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [319.737202] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [319.737633] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [319.737831] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [319.743942] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.745951] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.747972] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.749811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.751846] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.753850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.755859] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.757893] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.761854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.763864] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.765879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.767902] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.769949] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.772020] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.774258] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.776224] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [319.777926] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [319.777963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [319.777980] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [319.777995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [319.778010] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [319.778025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [319.778070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [319.778090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [319.778108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [319.778172] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [319.778402] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [319.779918] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [319.780351] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [319.781701] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [319.782322] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [319.782422] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [319.782765] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [319.782855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [319.782859] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [319.782949] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [319.784195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [319.784198] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [319.784286] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [319.809137] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [319.809141] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [319.809144] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [319.809147] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [319.809150] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [319.809153] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [319.809157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [319.809160] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [319.809164] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [319.809424] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [319.809510] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [319.809841] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [319.809926] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [319.809938] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [319.814137] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [319.888386] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [319.889436] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [319.890285] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [319.890944] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [319.891646] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [321.212855] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [321.213566] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [321.218652] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [321.223331] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [321.224113] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [321.225004] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [321.225899] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [321.230596] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [321.245129] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [321.247407] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [321.249347] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [321.254812] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [321.256619] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [321.267465] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [321.267686] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [321.267840] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [321.274149] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.276199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.278254] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.280328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.282365] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.284308] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.286394] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.288466] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.292558] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.294523] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.296475] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.298475] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.300441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.302630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.304579] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.306556] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [321.308249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [321.308268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [321.308276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [321.308283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [321.308290] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [321.308298] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [321.308307] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [321.308316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [321.308324] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [321.308356] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [321.308576] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [321.310221] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [321.310427] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [321.312076] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [321.312617] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [321.312705] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [321.313142] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [321.313227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [321.313230] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [321.313313] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [321.314652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [321.314655] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [321.314741] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [321.339707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [321.339711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [321.339714] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [321.339717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [321.339720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [321.339723] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [321.339727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [321.339730] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [321.339734] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [321.340101] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [321.340191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [321.340632] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [321.340716] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [321.340727] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [321.344948] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [321.416324] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [321.417318] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [321.418126] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [321.418856] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [321.419627] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [322.534086] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [322.534694] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [322.539372] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [322.544274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [322.544896] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [322.545657] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [322.546380] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [322.550937] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [322.565244] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [322.567352] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [322.569266] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [322.574868] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [322.576627] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [322.586073] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [322.586289] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [322.586496] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [322.592825] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.594746] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.596685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.598660] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.600650] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.602571] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.604530] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.606436] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.610554] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.612498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.614431] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.616468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.618485] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.620438] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.622484] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.624483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [322.626197] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [322.626213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [322.626220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [322.626227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [322.626234] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [322.626240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [322.626248] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [322.626255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [322.626263] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [322.626290] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [322.626519] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [322.628223] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [322.628401] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [322.629995] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [322.630533] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [322.630635] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [322.631089] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [322.631173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [322.631177] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [322.631260] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [322.632603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [322.632607] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [322.632693] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [322.657667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [322.657672] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [322.657676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [322.657679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [322.657682] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [322.657685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [322.657689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [322.657692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [322.657696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [322.658066] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [322.658224] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [322.658709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [322.658842] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [322.658860] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [322.663050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [322.736379] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [322.737374] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [322.738193] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [322.738963] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [322.739760] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [323.957100] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [323.957719] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [323.962574] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [323.967204] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [323.967802] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [323.968620] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [323.969400] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [323.973182] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [323.983748] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [323.985577] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [323.987043] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [323.991137] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [323.992512] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [324.002029] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [324.002461] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [324.002724] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [324.008561] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.010541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.012525] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.014504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.016487] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.018337] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.020213] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.022048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.025817] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.027814] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.029832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.031845] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.033850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.035855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.037869] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.039882] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [324.041655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [324.041677] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [324.041689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [324.041702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [324.041713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [324.041726] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [324.041741] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [324.041755] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [324.041770] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [324.041821] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [324.042108] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [324.043450] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [324.043820] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [324.045086] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [324.045681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [324.045815] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [324.046147] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [324.046236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [324.046240] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [324.046327] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [324.047568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [324.047572] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [324.047659] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [324.072516] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz <7> [324.072520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [324.072523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [324.072526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [324.072529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [324.072532] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [324.072536] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR <7> [324.072539] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [324.072543] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1 <7> [324.072803] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [324.072889] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [324.073224] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [324.073307] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [324.073319] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [324.077439] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [324.081721] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [324.081844] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [324.081947] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.082049] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [324.082173] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [324.082275] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [324.082374] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [324.082563] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [324.082658] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [324.082752] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.082853] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [324.082953] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [324.083052] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [324.083164] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [324.083283] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [324.083363] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [324.083509] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [324.083600] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [324.083689] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.083785] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [324.083881] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [324.083976] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [324.084078] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [324.084185] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [324.084264] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [324.084357] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [324.084431] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [324.084503] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [324.084576] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [324.084647] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [324.084718] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [324.084805] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1 <7> [324.084904] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [324.085001] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [324.085111] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [324.085218] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [324.085330] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [324.085422] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [324.085512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [324.085610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [324.085707] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [324.085802] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [324.085895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [324.085987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [324.086087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [324.086178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [324.086269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [324.086359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [324.086449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [324.086537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [324.086626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [324.086715] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [324.086804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [324.086892] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [324.086980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [324.087072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [324.087160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [324.087247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [324.087336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [324.087424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [324.087513] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [324.087601] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [324.087689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [324.087777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [324.087864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [324.087952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [324.088039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [324.088138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [324.088232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [324.088323] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [324.088413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [324.088501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [324.088589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [324.088678] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [324.088764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [324.088851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [324.088938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [324.089024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [324.089118] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [324.089204] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [324.089290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [324.089376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [324.089462] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [324.089548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [324.089634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [324.089720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [324.089808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [324.089895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [324.089984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [324.090079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [324.090166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [324.090252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.090338] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.090423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.090509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [324.090595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [324.090680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.090766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.090851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.090938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [324.091024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [324.091121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [324.091206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [324.091293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [324.091378] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [324.091464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [324.091550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [324.091635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [324.092033] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [324.092160] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [324.092256] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [324.092569] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [324.092657] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [324.092740] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [324.092823] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [324.092904] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [324.092984] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [324.093067] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [324.093145] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [324.093224] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [324.093304] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [324.093385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [324.093464] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [324.093543] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [324.093619] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [324.093696] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [324.093773] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [324.094069] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [324.094231] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [324.094508] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [324.094609] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [324.094698] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [324.099655] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [324.104403] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [324.105414] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [324.105853] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [324.107356] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [324.107907] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [324.114949] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [324.115068] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [324.120976] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [324.121194] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [324.122475] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [324.140176] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD <7> [324.156807] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [324.157708] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [324.163071] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [324.163482] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.163875] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [324.164281] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [324.164433] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [324.164736] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [324.164653] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [324.164988] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [324.165418] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [324.165698] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [324.165930] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [324.166311] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [324.166586] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.166867] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [324.167149] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [324.167413] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [324.167672] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [324.168015] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [324.168259] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.168485] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [324.168712] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [324.168924] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [324.169139] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [324.169355] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [324.169522] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [324.169673] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [324.169959] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [324.170149] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [324.170334] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [324.170520] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [324.170699] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [324.170867] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [324.171060] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [324.171199] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [324.171329] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [324.171486] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [324.171604] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [324.171722] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [324.171831] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [324.171939] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [324.172044] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [324.172159] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [324.172260] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [324.172372] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 594000 num active planes 1 <7> [324.172508] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [324.172646] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [324.172779] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [324.172919] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [324.173067] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3 <7> [324.173183] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3 <7> [324.173298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset] <7> [324.173420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [324.173543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [324.173662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [324.173776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [324.173886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [324.173992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [324.174105] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [324.174209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [324.174310] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [324.174312] xe 0000:03:00.0: colorspace: RGB <7> [324.174313] xe 0000:03:00.0: scan mode: Underscan <7> [324.174315] xe 0000:03:00.0: colorimetry: No Data <7> [324.174316] xe 0000:03:00.0: picture aspect: No Data <7> [324.174317] xe 0000:03:00.0: active aspect: Same as Picture <7> [324.174318] xe 0000:03:00.0: itc: No Data <7> [324.174320] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [324.174321] xe 0000:03:00.0: quantization range: Full <7> [324.174322] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [324.174324] xe 0000:03:00.0: video code: 0 <7> [324.174325] xe 0000:03:00.0: ycc quantization range: Full <7> [324.174326] xe 0000:03:00.0: hdmi content type: Graphics <7> [324.174327] xe 0000:03:00.0: pixel repeat: 0 <7> [324.174329] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [324.174330] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [324.174332] xe 0000:03:00.0: vendor: Intel <7> [324.174333] xe 0000:03:00.0: product: Discrete gfx <7> [324.174335] xe 0000:03:00.0: source device information: PC General (0x9) <7> [324.174336] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [324.174337] xe 0000:03:00.0: empty frame <7> [324.174339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 6d 10 00 01 00 00 00 00 00 00 00 00 <7> [324.174439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 24 96 11 ed 41 4f 43 32 38 45 38 35 30 2e 48 44 <7> [324.174535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 52 09 07 07 <7> [324.174632] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [324.174728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [324.174824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [324.174919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [324.175014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [324.175136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [324.175233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [324.175329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [324.175430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [324.175531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [324.175630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [324.175727] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [324.175824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [324.175922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [324.176018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [324.176122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [324.176218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [324.176313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [324.176411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [324.176505] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [324.176601] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [324.176695] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [324.176790] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [324.176884] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [324.176978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [324.177075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [324.177169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [324.177263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [324.177357] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [324.177451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [324.177546] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [324.177640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [324.177735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [324.177829] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [324.177924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [324.178019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [324.178120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.178216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.178311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.178405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [324.178498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [324.178591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.178685] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.178779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [324.178873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [324.178967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [324.179064] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [324.179158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [324.179254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no <7> [324.179347] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no <7> [324.179441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no <7> [324.179533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no <7> [324.179626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no <7> [324.180536] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [324.180664] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [324.180779] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [324.180872] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [324.180960] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [324.181046] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [324.181141] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [324.181228] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [324.181312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [324.181395] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [324.181476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [324.181559] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [324.181646] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [324.181729] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [324.181810] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [324.181889] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [324.181968] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [324.182050] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [324.189655] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [324.189972] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [324.206628] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:269:pipe B] <7> [324.206807] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [324.209822] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [324.211149] xe 0000:03:00.0: [drm:intel_hdmi_handle_sink_scrambling [xe]] [CONNECTOR:539:HDMI-A-3] scrambling=no, TMDS bit clock ratio=1/10 <7> [324.211592] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1) <7> [324.211767] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [324.212174] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1) <7> [324.212332] xe 0000:03:00.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:539:HDMI-A-3] Failed to read TMDS config: -6 <7> [324.212352] xe 0000:03:00.0: [drm:intel_ddi_enable [xe]] [CONNECTOR:539:HDMI-A-3] Failed to configure sink scrambling/TMDS bit clock ratio <7> [324.224084] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [324.230373] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe B], 36 bytes ELD <7> [324.244611] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [324.246936] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [324.247622] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [324.248508] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [324.249296] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <6> [324.256867] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [324.273652] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [324.275689] [IGT] xe_pm: exiting, ret=0 <6> [324.297919] Console: switching to colour frame buffer device 240x67

<6> [309.257641] Console: switching to colour dummy device 80x25

<6> [310.356793] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [310.359420] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [310.359535] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [310.359632] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [310.359722] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [310.359812] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [310.359901] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [310.359988] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [310.360185] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [310.360272] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [310.360357] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [310.360442] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [310.360530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [310.360619] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [310.360706] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [310.360815] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [310.360886] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [310.360964] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [310.361122] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [310.361210] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [310.361297] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [310.361383] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [310.361468] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [310.361553] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [310.361636] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [310.361728] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [310.361798] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [310.361872] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [310.361965] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [310.362042] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [310.362114] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [310.362179] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [310.362245] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [310.362308] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [310.362371] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [310.362433] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [310.362510] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [310.362599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [310.362685] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [310.362770] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [310.362868] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [310.362969] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [310.363066] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [310.363161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [310.363251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [310.363340] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [310.363427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [310.363511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [310.363593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [310.363673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [310.363753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [310.363832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [310.363912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [310.363990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [310.364108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [310.364194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [310.364274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [310.364353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [310.364433] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [310.364512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [310.364592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [310.364673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [310.364754] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [310.364836] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [310.364915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [310.364995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [310.365096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [310.365181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [310.365261] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [310.365341] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [310.365421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [310.365500] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [310.365580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [310.365658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [310.365737] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [310.365816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [310.365895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [310.365974] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [310.366064] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [310.366150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [310.366231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [310.366310] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [310.366389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [310.366469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [310.366548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [310.366627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [310.366706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [310.366785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [310.366865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [310.366944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [310.367035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [310.367124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [310.367212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [310.367300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [310.367388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [310.367474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [310.367558] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.367637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.367716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.367795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [310.367874] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [310.367954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.368083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.368169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.368249] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [310.368330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [310.368410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [310.368489] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [310.368568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [310.368647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [310.368725] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [310.368804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [310.369634] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A]

<7> [310.388640] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [310.389456] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [310.405233] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [310.407137] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [310.409187] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [310.409659] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [310.409840] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [310.410026] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [310.410200] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [310.410379] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [310.410551] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [310.410720] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [310.410894] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [310.411093] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [310.411282] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [310.411466] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [310.411653] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [310.411836] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [310.412020] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [310.412205] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [310.412376] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [310.413243] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [310.414019] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [310.414408] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [310.414750] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [310.427497] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [310.428173] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [310.428795] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [310.429415] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [310.430750] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [310.431132] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [310.431466] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [310.431780] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [310.432118] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [310.432407] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [310.432843] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [310.433138] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [310.433400] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [310.433660] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [310.433908] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [310.434178] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [310.434515] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [310.434738] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [310.434957] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [310.435215] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [310.435447] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [310.435659] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [310.435898] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [310.436081] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [310.436281] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [310.436429] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [310.436571] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [310.436710] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [310.436848] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [310.436979] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [310.437168] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [310.437346] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [310.437511] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [310.437671] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [310.437845] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [310.438031] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3

<7> [310.438175] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3

<7> [310.438316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset]

<7> [310.438471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [310.438622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [310.438764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [310.438902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [310.439044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [310.439190] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [310.439318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [310.439445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [310.439569] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [310.439574] xe 0000:03:00.0: scan mode: Underscan

<7> [310.439576] xe 0000:03:00.0: colorimetry: No Data

<7> [310.439577] xe 0000:03:00.0: picture aspect: No Data

<7> [310.439579] xe 0000:03:00.0: active aspect: Same as Picture

<7> [310.439582] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [310.439584] xe 0000:03:00.0: quantization range: Full

<7> [310.439586] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [310.439589] xe 0000:03:00.0: ycc quantization range: Full

<7> [310.439591] xe 0000:03:00.0: hdmi content type: Graphics

<7> [310.439594] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [310.439596] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [310.439600] xe 0000:03:00.0: product: Discrete gfx

<7> [310.439602] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [310.439604] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [310.439607] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 6d 10 00 01 00 00 00 00 00 00 00 00

<7> [310.439726] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 24 96 11 ed 41 4f 43 32 38 45 38 35 30 2e 48 44

<7> [310.439839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 52 09 07 07

<7> [310.439951] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [310.440075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [310.440191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [310.440299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [310.440405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [310.440511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [310.440618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [310.440720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [310.440823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [310.440921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [310.441034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [310.441130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [310.441223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [310.441316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [310.441406] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [310.441497] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [310.441587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [310.441677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [310.441768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [310.441857] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [310.441946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [310.442048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [310.442138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [310.442227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [310.442315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [310.442405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [310.442494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [310.442584] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [310.442674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [310.442765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [310.442856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [310.442947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [310.443048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [310.443141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [310.443231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [310.443321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [310.443410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.443499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.443588] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.443677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [310.443766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [310.443854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.443943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.444047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.444138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [310.444228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [310.444319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [310.444407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no

<7> [310.444495] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no

<7> [310.444586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no

<7> [310.444674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no

<7> [310.444763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no

<7> [310.445426] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe B]

<7> [310.477432] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [310.478584] xe 0000:03:00.0: [drm:intel_hdmi_handle_sink_scrambling [xe]] [CONNECTOR:539:HDMI-A-3] scrambling=no, TMDS bit clock ratio=1/10

<7> [310.479446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)

<7> [310.479800] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [310.480528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)

<7> [310.480845] xe 0000:03:00.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:539:HDMI-A-3] Failed to read TMDS config: -6

<7> [310.480886] xe 0000:03:00.0: [drm:intel_ddi_disable [xe]] [CONNECTOR:539:HDMI-A-3] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [310.481747] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [310.491089] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [310.495182] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:269:pipe B]

<7> [310.497761] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [310.498457] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [310.498937] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [310.499445] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [310.499885] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [310.500308] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [310.500673] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [310.501021] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [310.501341] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [310.501653] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [310.501971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [310.502327] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [310.502634] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [310.502912] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [310.503222] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [310.503509] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [310.503784] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [310.504296] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [310.504736] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [310.505172] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [310.505903] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [310.506377] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [310.506627] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [310.507067] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [310.507277] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]

<7> [310.513083] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [310.513603] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [310.514107] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [310.514610] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [310.515111] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [311.772246] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [311.772858] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [311.777523] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [311.782217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [311.782706] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [311.783429] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [311.784125] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [311.787870] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [311.801193] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [311.804190] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [311.806203] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [311.812182] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [311.814208] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [311.830675] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [311.830910] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [311.831257] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [311.836309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.838080] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.839911] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.841747] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.843720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.845696] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.847562] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.849434] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.853097] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.854920] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.856757] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.858767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.860770] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.862776] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.864794] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.866675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [311.868457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [311.868476] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [311.868486] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [311.868496] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [311.868506] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [311.868517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [311.868530] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [311.868542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [311.868554] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [311.868603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [311.868921] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [311.870340] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [311.870616] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [311.871900] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [311.872449] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [311.872539] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [311.872867] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [311.872952] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [311.872956] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [311.873049] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [311.874285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [311.874288] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [311.874375] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [311.899379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [311.899384] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [311.899387] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [311.899390] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [311.899393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [311.899396] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [311.899400] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [311.899404] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [311.899408] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [311.899670] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [311.899771] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [311.900111] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [311.900197] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [311.900209] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [311.904444] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [311.976224] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [311.977056] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [311.977723] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [311.978374] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [311.978976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [313.194777] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [313.195493] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [313.200353] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [313.205046] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [313.205794] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [313.206727] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [313.207645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [313.211889] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [313.226423] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [313.228832] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [313.230825] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [313.236309] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [313.238116] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [313.249386] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [313.249598] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [313.249802] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [313.256174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.258217] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.260236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.262269] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.264290] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.266350] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.268409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.270392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.274468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.276448] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.278415] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.280432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.282435] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.284447] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.286387] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.288468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [313.290134] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [313.290149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [313.290156] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [313.290162] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [313.290168] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [313.290175] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [313.290182] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [313.290190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [313.290197] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [313.290224] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [313.290424] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [313.294975] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [313.295153] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [313.296726] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [313.297238] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [313.297335] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [313.297770] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [313.297856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [313.297859] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [313.297943] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [313.300627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [313.300631] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [313.300720] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [313.325689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [313.325693] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [313.325696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [313.325699] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [313.325702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [313.325705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [313.325710] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [313.325713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [313.325717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [313.326082] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [313.326166] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [313.326597] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [313.326679] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [313.326690] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [313.330843] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [313.400260] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [313.401240] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [313.402360] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [313.403246] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [313.404083] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [314.521103] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [314.521789] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [314.526476] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [314.531187] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [314.531724] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [314.532389] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [314.533205] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [314.537839] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [314.551882] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [314.554125] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [314.555980] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [314.560098] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [314.561590] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [314.570769] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [314.570914] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [314.571070] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [314.577199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.579198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.581202] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.583195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.585197] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.587205] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.589184] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.591196] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.595153] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.597174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.599195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.601220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.603239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.605251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.607270] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.609427] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [314.611137] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [314.611151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [314.611157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [314.611162] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [314.611167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [314.611172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [314.611179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [314.611185] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [314.611192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [314.611216] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [314.611396] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [314.613085] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [314.613302] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [314.614959] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [314.615547] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [314.615682] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [314.616168] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [314.616297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [314.616303] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [314.616432] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [314.617844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [314.617849] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [314.617983] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [314.643091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [314.643096] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [314.643100] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [314.643103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [314.643106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [314.643109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [314.643113] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [314.643116] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [314.643120] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [314.643487] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [314.643582] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [314.644032] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [314.644192] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [314.644213] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [314.648757] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [314.720296] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [314.721287] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [314.722115] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [314.723094] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [314.723946] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [316.045678] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [316.046359] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [316.051173] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [316.055727] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [316.056455] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [316.057237] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [316.058108] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [316.062806] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [316.077131] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [316.079537] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [316.081203] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [316.086634] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [316.088625] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [316.098687] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [316.098897] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [316.099112] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [316.105295] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.107314] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.109333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.111260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.113265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.115278] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.117290] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.119308] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.123484] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.125411] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.127426] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.129476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.131476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.133480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.135481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.137400] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [316.139242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [316.139257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [316.139265] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [316.139271] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [316.139277] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [316.139283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [316.139291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [316.139299] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [316.139306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [316.139333] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [316.139551] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [316.141283] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [316.141461] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [316.143024] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [316.143940] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [316.144030] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [316.144292] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [316.144381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [316.144385] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [316.144470] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [316.145814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [316.145818] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [316.145903] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [316.170873] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [316.170877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [316.170880] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [316.170883] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [316.170886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [316.170889] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [316.170893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [316.170897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [316.170901] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [316.171272] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [316.171358] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [316.171790] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [316.171890] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [316.171904] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [316.176128] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [316.248285] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [316.249256] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [316.250071] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [316.250793] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [316.251563] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<6> [317.023273] xe 0000:03:00.0: [drm] PL2 disabled for channel 0, val 0x00000000

<7> [318.169076] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [318.169823] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [318.174661] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [318.179315] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [318.179923] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [318.180777] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [318.181586] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [318.185162] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [318.195788] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [318.197618] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [318.199108] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [318.203187] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [318.204587] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [318.213982] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [318.214416] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [318.214531] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [318.220556] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.222527] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.224361] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.226208] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.228236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.230250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.232108] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.233938] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.237826] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.239818] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.241830] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.243832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.245692] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.247680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.249540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.251371] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [318.252953] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [318.252966] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [318.252979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [318.252990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [318.253001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [318.253012] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [318.253026] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [318.253062] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [318.253078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [318.253126] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [318.253391] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [318.254697] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [318.254993] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [318.256270] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [318.256795] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [318.256883] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [318.257214] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [318.257299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [318.257303] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [318.257387] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [318.258629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [318.258632] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [318.258720] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [318.283578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [318.283583] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [318.283586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [318.283589] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [318.283592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [318.283596] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [318.283600] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [318.283603] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [318.283607] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [318.283863] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [318.283958] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [318.284297] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [318.284383] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [318.284394] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [318.288554] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [318.360217] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [318.360991] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [318.361715] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [318.362340] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [318.362932] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [319.692246] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [319.693042] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [319.697792] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [319.702393] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [319.703010] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [319.703905] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [319.704751] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [319.708183] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [319.718885] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [319.720709] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [319.722188] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [319.726156] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [319.727534] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [319.737202] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [319.737633] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [319.737831] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [319.743942] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.745951] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.747972] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.749811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.751846] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.753850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.755859] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.757893] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.761854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.763864] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.765879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.767902] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.769949] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.772020] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.774258] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.776224] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [319.777926] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [319.777963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [319.777980] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [319.777995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [319.778010] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [319.778025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [319.778070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [319.778090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [319.778108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [319.778172] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [319.778402] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [319.779918] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [319.780351] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [319.781701] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [319.782322] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [319.782422] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [319.782765] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [319.782855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [319.782859] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [319.782949] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [319.784195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [319.784198] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [319.784286] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [319.809137] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [319.809141] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [319.809144] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [319.809147] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [319.809150] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [319.809153] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [319.809157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [319.809160] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [319.809164] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [319.809424] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [319.809510] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [319.809841] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [319.809926] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [319.809938] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [319.814137] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [319.888386] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [319.889436] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [319.890285] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [319.890944] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [319.891646] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [321.212855] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [321.213566] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [321.218652] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [321.223331] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [321.224113] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [321.225004] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [321.225899] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [321.230596] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [321.245129] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [321.247407] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [321.249347] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [321.254812] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [321.256619] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [321.267465] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [321.267686] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [321.267840] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [321.274149] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.276199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.278254] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.280328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.282365] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.284308] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.286394] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.288466] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.292558] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.294523] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.296475] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.298475] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.300441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.302630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.304579] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.306556] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [321.308249] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [321.308268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [321.308276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [321.308283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [321.308290] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [321.308298] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [321.308307] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [321.308316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [321.308324] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [321.308356] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [321.308576] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [321.310221] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [321.310427] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [321.312076] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [321.312617] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [321.312705] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [321.313142] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [321.313227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [321.313230] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [321.313313] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [321.314652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [321.314655] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [321.314741] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [321.339707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [321.339711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [321.339714] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [321.339717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [321.339720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [321.339723] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [321.339727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [321.339730] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [321.339734] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [321.340101] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [321.340191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [321.340632] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [321.340716] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [321.340727] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [321.344948] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [321.416324] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [321.417318] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [321.418126] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [321.418856] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [321.419627] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [322.534086] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [322.534694] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [322.539372] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [322.544274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [322.544896] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [322.545657] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [322.546380] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [322.550937] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [322.565244] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [322.567352] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [322.569266] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [322.574868] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [322.576627] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [322.586073] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [322.586289] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [322.586496] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [322.592825] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.594746] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.596685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.598660] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.600650] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.602571] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.604530] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.606436] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.610554] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.612498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.614431] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.616468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.618485] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.620438] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.622484] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.624483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [322.626197] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [322.626213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [322.626220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [322.626227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [322.626234] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [322.626240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [322.626248] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [322.626255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [322.626263] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [322.626290] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [322.626519] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [322.628223] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [322.628401] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [322.629995] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [322.630533] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [322.630635] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [322.631089] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [322.631173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [322.631177] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [322.631260] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [322.632603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [322.632607] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [322.632693] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [322.657667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [322.657672] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [322.657676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [322.657679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [322.657682] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [322.657685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [322.657689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [322.657692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [322.657696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [322.658066] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [322.658224] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [322.658709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [322.658842] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [322.658860] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [322.663050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [322.736379] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [322.737374] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [322.738193] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [322.738963] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [322.739760] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [323.957100] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [323.957719] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [323.962574] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [323.967204] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [323.967802] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [323.968620] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [323.969400] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [323.973182] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [323.983748] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [323.985577] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [323.987043] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [323.991137] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [323.992512] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [324.002029] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [324.002461] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [324.002724] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [324.008561] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.010541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.012525] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.014504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.016487] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.018337] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.020213] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.022048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.025817] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.027814] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.029832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.031845] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.033850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.035855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.037869] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.039882] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [324.041655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [324.041677] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [324.041689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [324.041702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [324.041713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [324.041726] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [324.041741] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [324.041755] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [324.041770] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [324.041821] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [324.042108] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [324.043450] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [324.043820] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [324.045086] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [324.045681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [324.045815] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [324.046147] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [324.046236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [324.046240] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [324.046327] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [324.047568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [324.047572] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [324.047659] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [324.072516] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz

<7> [324.072520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [324.072523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [324.072526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [324.072529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [324.072532] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [324.072536] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor AOC28E850.HDR

<7> [324.072539] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [324.072543] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 1

<7> [324.072803] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [324.072889] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [324.073224] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [324.073307] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [324.073319] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [324.077439] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [324.081721] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [324.081844] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [324.081947] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.082049] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [324.082173] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.082275] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [324.082374] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [324.082563] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [324.082658] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [324.082752] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.082853] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [324.082953] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.083052] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [324.083164] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [324.083283] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [324.083363] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [324.083509] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [324.083600] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [324.083689] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.083785] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [324.083881] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.083976] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [324.084078] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [324.084185] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [324.084264] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [324.084357] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [324.084431] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [324.084503] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [324.084576] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [324.084647] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [324.084718] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [324.084805] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1

<7> [324.084904] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [324.085001] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [324.085111] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [324.085218] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [324.085330] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [324.085422] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [324.085512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [324.085610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [324.085707] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [324.085802] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [324.085895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [324.085987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [324.086087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [324.086178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [324.086269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [324.086359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [324.086449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [324.086537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [324.086626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [324.086715] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [324.086804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [324.086892] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [324.086980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [324.087072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [324.087160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [324.087247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [324.087336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [324.087424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [324.087513] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [324.087601] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [324.087689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [324.087777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [324.087864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [324.087952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [324.088039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [324.088138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [324.088232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [324.088323] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [324.088413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [324.088501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [324.088589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [324.088678] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [324.088764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [324.088851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [324.088938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [324.089024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [324.089118] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [324.089204] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [324.089290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [324.089376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [324.089462] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [324.089548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [324.089634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [324.089720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [324.089808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [324.089895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [324.089984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [324.090079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [324.090166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [324.090252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.090338] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.090423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.090509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [324.090595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [324.090680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.090766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.090851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.090938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [324.091024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [324.091121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [324.091206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [324.091293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [324.091378] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [324.091464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [324.091550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [324.091635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [324.092033] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [324.092160] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [324.092256] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [324.092569] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [324.092657] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [324.092740] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [324.092823] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [324.092904] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [324.092984] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [324.093067] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [324.093145] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [324.093224] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [324.093304] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [324.093385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [324.093464] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [324.093543] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [324.093619] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [324.093696] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [324.093773] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [324.094069] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [324.094231] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [324.094508] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [324.094609] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [324.094698] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [324.099655] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [324.104403] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [324.105414] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [324.105853] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [324.107356] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [324.107907] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [324.114949] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [324.115068] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [324.120976] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [324.121194] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [324.122475] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [324.140176] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD

<7> [324.156807] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [324.157708] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [324.163071] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [324.163482] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.163875] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [324.164281] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.164433] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [324.164736] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [324.164653] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [324.164988] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [324.165418] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [324.165698] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [324.165930] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [324.166311] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [324.166586] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.166867] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [324.167149] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.167413] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [324.167672] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [324.168015] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [324.168259] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.168485] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [324.168712] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.168924] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [324.169139] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [324.169355] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [324.169522] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [324.169673] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [324.169959] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [324.170149] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [324.170334] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [324.170520] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [324.170699] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [324.170867] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [324.171060] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [324.171199] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [324.171329] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [324.171486] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [324.171604] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [324.171722] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [324.171831] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [324.171939] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [324.172044] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [324.172159] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [324.172260] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [324.172372] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 594000 num active planes 1

<7> [324.172508] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [324.172646] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [324.172779] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [324.172919] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [324.173067] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3

<7> [324.173183] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3

<7> [324.173298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset]

<7> [324.173420] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [324.173543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [324.173662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [324.173776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [324.173886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [324.173992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [324.174105] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [324.174209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [324.174310] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [324.174313] xe 0000:03:00.0: scan mode: Underscan

<7> [324.174315] xe 0000:03:00.0: colorimetry: No Data

<7> [324.174316] xe 0000:03:00.0: picture aspect: No Data

<7> [324.174317] xe 0000:03:00.0: active aspect: Same as Picture

<7> [324.174320] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [324.174321] xe 0000:03:00.0: quantization range: Full

<7> [324.174322] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [324.174325] xe 0000:03:00.0: ycc quantization range: Full

<7> [324.174326] xe 0000:03:00.0: hdmi content type: Graphics

<7> [324.174329] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [324.174330] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [324.174333] xe 0000:03:00.0: product: Discrete gfx

<7> [324.174335] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [324.174336] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [324.174339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 6d 10 00 01 00 00 00 00 00 00 00 00

<7> [324.174439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 24 96 11 ed 41 4f 43 32 38 45 38 35 30 2e 48 44

<7> [324.174535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 52 09 07 07

<7> [324.174632] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [324.174728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [324.174824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [324.174919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [324.175014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [324.175136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [324.175233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [324.175329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [324.175430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [324.175531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [324.175630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [324.175727] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [324.175824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [324.175922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [324.176018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [324.176122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [324.176218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [324.176313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [324.176411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [324.176505] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [324.176601] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [324.176695] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [324.176790] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [324.176884] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [324.176978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [324.177075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [324.177169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [324.177263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [324.177357] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [324.177451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [324.177546] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [324.177640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [324.177735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [324.177829] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [324.177924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [324.178019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [324.178120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.178216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.178311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.178405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [324.178498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [324.178591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.178685] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.178779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [324.178873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [324.178967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [324.179064] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [324.179158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [324.179254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no

<7> [324.179347] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no

<7> [324.179441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no

<7> [324.179533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no

<7> [324.179626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no

<7> [324.180536] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [324.180664] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [324.180779] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [324.180872] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [324.180960] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [324.181046] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [324.181141] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [324.181228] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [324.181312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [324.181395] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [324.181476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [324.181559] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [324.181646] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [324.181729] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [324.181810] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [324.181889] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [324.181968] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [324.182050] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [324.189655] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [324.189972] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [324.206628] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:269:pipe B]

<7> [324.206807] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [324.209822] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [324.211149] xe 0000:03:00.0: [drm:intel_hdmi_handle_sink_scrambling [xe]] [CONNECTOR:539:HDMI-A-3] scrambling=no, TMDS bit clock ratio=1/10

<7> [324.211592] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)

<7> [324.211767] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [324.212174] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)

<7> [324.212332] xe 0000:03:00.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:539:HDMI-A-3] Failed to read TMDS config: -6

<7> [324.212352] xe 0000:03:00.0: [drm:intel_ddi_enable [xe]] [CONNECTOR:539:HDMI-A-3] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [324.224084] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [324.230373] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe B], 36 bytes ELD

<7> [324.244611] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [324.246936] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [324.247622] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [324.248508] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [324.249296] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]

<6> [324.256867] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [324.273652] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [324.297919] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram