Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g7f3362137 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4849-1f2d2058e732e5b15-debug+ x86_64)
Out 
Using IGT_SRANDOM=1775259386 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [274.863164] Console: switching to colour dummy device 80x25
<6> [274.863347] [IGT] kms_force_connector_basic: executing
<7> [274.865929] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [274.865937] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.865941] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.870102] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [274.870139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.870143] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.874298] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [274.874345] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.874349] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.878541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [274.878750] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [274.879029] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [274.879034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.879038] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.879428] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [274.879516] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [274.879875] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [274.879967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [274.879976] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [274.880058] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [274.886101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [274.886106] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [274.886193] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from disconnected to connected
<7> [274.886234] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [274.886237] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [274.886240] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [274.886243] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [274.886246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [274.886249] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [274.886278] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.886282] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.886680] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [274.886767] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [274.887124] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [274.887205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [274.887211] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [274.887291] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [274.888346] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [274.888408] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [274.893831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [274.893841] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [274.893988] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [274.893993] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [274.893996] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [274.893999] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [274.894002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [274.894004] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [274.894189] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:517:HDMI-A-1] EDID override set
<7> [274.894206] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.894210] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.894485] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD monitor IGT
<7> [274.894490] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD size 24, SAD count 0
<7> [274.894779] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [274.894870] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [274.895245] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [274.895344] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [274.895432] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [274.895439] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [274.895445] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [274.895448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [274.895451] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [274.895454] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [274.895456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [274.895459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [274.895544] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [274.895636] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.895639] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.896040] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [274.896128] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [274.896488] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [274.896569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [274.896575] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [274.896657] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [274.902743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [274.902749] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [274.902836] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:517:HDMI-A-1] EDID changed, epoch counter 2
<7> [274.902880] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [274.902887] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [274.902893] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [274.902896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [274.902899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [274.902902] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [274.902905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [274.902907] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [274.903063] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [274.903068] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.903073] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.907226] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from connected to disconnected
<7> [274.907238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [274.907292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.907296] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.907435] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [274.907498] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [274.911464] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [274.911684] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [274.928872] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [274.928878] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [274.929070] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [274.929075] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [274.929551] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [274.929911] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [274.930324] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [274.930455] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [274.930565] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [274.930571] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [274.930575] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [274.930579] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [274.930595] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [274.930684] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [274.930773] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [274.931158] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [274.931162] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [274.931166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [274.931170] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [274.931173] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [274.935344] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [274.935349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [274.935352] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [274.935498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [274.935502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [274.935505] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [274.956507] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [274.977475] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [274.998435] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.019391] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.040348] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.061304] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.082259] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.103223] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.124177] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.145130] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.166083] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.187036] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.207988] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.228949] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.249907] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.270862] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.291846] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.312829] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.333806] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.354768] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.375726] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.396684] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.417636] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.438586] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.459538] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.480495] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.501451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.522403] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.543357] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.564309] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.585263] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.606214] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.606316] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [275.606335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [275.606375] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [275.606379] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [275.606530] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [275.606818] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [275.606823] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [275.606995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [275.606999] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [275.607003] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no
<7> [275.607005] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no
<7> [275.607007] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no
<7> [275.607010] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no
<7> [275.607012] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no
<7> [275.607040] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [275.607052] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160
<7> [275.607055] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [275.607070] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)
<7> [275.627123] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [275.627611] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [275.627616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [275.627620] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [275.628082] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [275.628426] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [275.628542] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [275.628632] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [275.628739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [275.628744] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [275.628747] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [275.628751] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [275.628765] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [275.628855] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [275.628959] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [275.629317] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [275.629321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [275.629324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [275.629356] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [275.629359] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [275.629886] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [275.630185] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [275.630347] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [275.630501] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [275.630678] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [275.630686] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [275.630692] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [275.630697] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [275.630716] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [275.630850] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [275.630951] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [275.631291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [275.631294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [275.631297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [275.631385] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [275.631399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [275.631402] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [275.631831] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [275.632129] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [275.632272] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [275.632408] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [275.632547] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [275.632551] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [275.632554] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [275.632557] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [275.632567] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [275.632653] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [275.632737] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [275.633079] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [275.633082] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [275.633086] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [275.633217] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [275.633221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [275.633224] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [275.637402] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [275.637428] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [275.637432] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [275.641602] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [275.641685] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [275.641700] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [275.641703] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [275.645854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [275.645944] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-1] EDID override reset
<7> [275.645959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [275.645963] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [275.646131] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [275.646199] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:536:DP-2] EDID override reset
<7> [275.646210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [275.646212] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [275.667208] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.688175] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.709133] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.730086] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.751037] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.771989] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.792938] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.813888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.834840] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.855839] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.876835] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.897831] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.918827] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.939821] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.960815] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [275.981807] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.002794] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.023773] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.044755] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.065726] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.086683] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.107640] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.128593] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.149546] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.170499] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.191451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.212406] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.233357] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.254306] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.275259] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.296249] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.317217] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [276.317330] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [276.317350] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [276.317485] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:545:DP-3] EDID override reset
<7> [276.317501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [276.317504] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [276.317662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [276.317740] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:554:DP-4] EDID override reset
<7> [276.317753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [276.317755] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [276.317917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [276.338015] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [276.338285] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [276.354715] Console: switching to colour frame buffer device 240x67
Created at 2026-04-03 23:45:08