igt@xe_pm@d3hot-mmap-vram on shard-bmg@IGT

Detail	Value
Duration	12.57 seconds
Hostname	shard-bmg-2
Igt-Version	IGT-Version: 2.4-g574c502c4 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ x86_64)
Out	Using IGT_SRANDOM=1775203605 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (12.571s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (12.571s)
Dmesg	<6> [399.397065] Console: switching to colour dummy device 80x25 <6> [399.397425] [IGT] xe_pm: executing <7> [399.722945] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 0 val 0x2b2c292a <7> [399.723258] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 1 val 0x2b2b2a2c <7> [400.331530] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [400.435234] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <6> [400.457765] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [400.460626] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [400.460737] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [400.460834] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [400.460928] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [400.461020] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [400.461110] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [400.461211] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [400.461396] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [400.461482] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [400.461565] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [400.461654] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [400.461744] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [400.461831] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [400.461914] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [400.462021] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [400.462094] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [400.462192] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [400.462368] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [400.462455] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [400.462539] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [400.462628] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [400.462718] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [400.462805] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [400.462891] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [400.462989] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [400.463061] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [400.463145] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [400.463273] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [400.463341] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [400.463405] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.463469] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.463534] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.463597] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.463660] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [400.463722] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [400.463801] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [400.463892] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [400.463979] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [400.464063] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [400.464182] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [400.464346] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [400.464445] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [400.464535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [400.464629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [400.464845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [400.465058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [400.465336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [400.465578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [400.465811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [400.466041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [400.466299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [400.466523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [400.466742] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [400.466960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [400.467198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [400.467418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [400.467640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [400.467858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [400.468079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [400.468333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [400.468553] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [400.468766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [400.468976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [400.469201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [400.469427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [400.469630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [400.469828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [400.470028] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [400.470240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [400.470422] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [400.470598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [400.470773] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [400.470939] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [400.471109] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [400.471302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [400.471463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [400.471624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [400.471783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [400.471938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [400.472097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [400.472275] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [400.472424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [400.472568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [400.472709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [400.472850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [400.472991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [400.473135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [400.473267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [400.473396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [400.473525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [400.473668] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [400.473795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [400.473918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [400.474042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [400.474192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [400.474312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.474427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.474541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.474653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [400.474765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [400.474873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.474982] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.475091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.475212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [400.475314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [400.475416] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [400.475515] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [400.475613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [400.475712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [400.475808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [400.475903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [400.477118] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A] <7> [400.500808] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [400.501553] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [400.517398] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [400.520303] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [400.522894] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [400.523720] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [400.524194] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [400.524635] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [400.525023] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [400.525414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [400.525759] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [400.526363] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [400.526409] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [400.527328] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [400.526932] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [400.527543] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [400.527851] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [400.528167] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [400.528447] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [400.528720] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [400.529208] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [400.529462] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [400.529697] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [400.531766] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [400.532165] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [400.537654] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [400.538203] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [400.538706] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [400.539180] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [400.540372] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [400.540571] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [400.540766] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [400.540950] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [400.541351] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [400.541576] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [400.541830] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [400.541977] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [400.542150] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [400.542311] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [400.542464] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [400.542605] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [400.542806] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [400.542937] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [400.543078] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [400.543228] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [400.543359] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [400.543483] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [400.543631] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [400.543732] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [400.543852] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [400.543950] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [400.544047] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.544145] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.544229] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.544312] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.544405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [400.544517] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [400.544624] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [400.544727] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [400.544839] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [400.544952] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3 <7> [400.545048] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3 <7> [400.545147] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset] <7> [400.545251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [400.545348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [400.545443] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [400.545535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [400.545627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [400.545719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [400.545812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [400.545905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [400.545994] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [400.545996] xe 0000:03:00.0: colorspace: RGB <7> [400.545997] xe 0000:03:00.0: scan mode: Underscan <7> [400.545999] xe 0000:03:00.0: colorimetry: No Data <7> [400.546000] xe 0000:03:00.0: picture aspect: 16:9 <7> [400.546002] xe 0000:03:00.0: active aspect: Same as Picture <7> [400.546003] xe 0000:03:00.0: itc: No Data <7> [400.546005] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [400.546006] xe 0000:03:00.0: quantization range: Default <7> [400.546008] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [400.546009] xe 0000:03:00.0: video code: 16 <7> [400.546011] xe 0000:03:00.0: ycc quantization range: Full <7> [400.546012] xe 0000:03:00.0: hdmi content type: Graphics <7> [400.546014] xe 0000:03:00.0: pixel repeat: 0 <7> [400.546015] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [400.546017] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [400.546018] xe 0000:03:00.0: vendor: Intel <7> [400.546020] xe 0000:03:00.0: product: Discrete gfx <7> [400.546021] xe 0000:03:00.0: source device information: PC General (0x9) <7> [400.546023] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [400.546025] xe 0000:03:00.0: empty frame <7> [400.546026] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [400.546116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [400.546220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [400.546309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [400.546398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [400.546487] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [400.546576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [400.546664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [400.546753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [400.546842] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [400.546933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [400.547023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [400.547113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [400.547217] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [400.547307] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [400.547396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [400.547483] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [400.547570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [400.547657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [400.547743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [400.547830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [400.547918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [400.548006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [400.548096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [400.548195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [400.548284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [400.548372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [400.548460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [400.548547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [400.548635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [400.548722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [400.548811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [400.548899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [400.548986] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [400.549074] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [400.549171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [400.549261] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [400.549350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [400.549436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [400.549524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.549611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.549698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.549785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [400.549873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [400.549963] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.550050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.550143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [400.550232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [400.550319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [400.550408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [400.550496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no <7> [400.550583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no <7> [400.550670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no <7> [400.550757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no <7> [400.550844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no <7> [400.551372] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe B] <7> [400.571042] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [400.571787] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [400.583931] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [400.589389] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:269:pipe B] <7> [400.591710] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [400.592360] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [400.592639] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [400.592906] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [400.593390] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [400.593628] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [400.593870] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [400.594113] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [400.594575] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [400.594781] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [400.594979] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [400.595198] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [400.595397] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [400.595793] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [400.595970] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [400.596161] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [400.596329] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [400.596719] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [400.596881] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [400.597251] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [400.597707] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [400.597888] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [400.598308] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [400.598742] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [400.598896] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7> [400.627230] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [400.628204] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.628982] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.629759] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.630523] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [401.944207] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [401.945278] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [401.949822] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [401.954320] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [401.954714] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [401.955460] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [401.956061] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [401.959846] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [401.970001] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [401.971602] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [401.973042] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [401.976954] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [401.978268] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [401.986922] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [401.987208] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [401.987339] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [401.992218] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [401.994040] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [401.995910] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [401.997884] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [401.999758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.001635] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.003611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.005463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.008989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.010832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.012830] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.014842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.016842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.018855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.020857] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.022854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [402.024608] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [402.024624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [402.024634] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [402.024642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [402.024651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [402.024660] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [402.024671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [402.024681] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [402.024691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [402.024734] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [402.024998] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [402.026310] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [402.026581] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [402.028064] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [402.028643] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [402.028799] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [402.029136] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [402.029222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [402.029225] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [402.029310] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [402.030552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [402.030555] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [402.030643] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [402.055497] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [402.055502] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [402.055505] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [402.055508] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [402.055511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [402.055514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [402.055517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [402.055521] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [402.055524] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [402.055780] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [402.055872] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [402.056203] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [402.056289] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [402.056301] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [402.060528] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [402.131324] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [402.132460] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [402.133206] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [402.134214] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [402.135157] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [403.271057] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [403.271209] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [403.275394] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [403.280247] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [403.280834] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [403.281557] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [403.282277] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [403.286980] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [403.301450] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [403.303821] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [403.305977] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [403.310859] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [403.312401] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [403.322284] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [403.322479] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [403.322655] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [403.328868] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.330793] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.332720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.334650] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.336568] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.338513] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.340348] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.342370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.346382] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.348342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.350299] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.352324] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.354291] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.356485] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.358360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.360377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [403.362105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [403.362118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [403.362125] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [403.362132] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [403.362138] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [403.362145] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [403.362153] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [403.362161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [403.362168] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [403.362197] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [403.362434] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [403.364112] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [403.364319] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [403.365932] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [403.366493] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [403.366594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [403.367040] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [403.367126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [403.367130] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [403.367215] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [403.368560] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [403.368566] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [403.368690] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [403.394316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [403.394321] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [403.394324] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [403.394327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [403.394330] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [403.394333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [403.394337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [403.394341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [403.394344] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [403.394510] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [403.394608] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [403.395052] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [403.395140] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [403.395152] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [403.399279] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [403.467305] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [403.468275] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [403.469063] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [403.469802] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [403.470587] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [404.597739] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [404.598454] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [404.603167] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [404.607807] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [404.608391] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [404.609081] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [404.609769] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [404.613861] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [404.628085] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [404.630387] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [404.632275] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [404.637585] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [404.639331] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [404.648738] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [404.648916] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [404.649091] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [404.655210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.657235] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.659250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.661264] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.663290] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.665309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.667324] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.669333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.673366] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.675377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.677364] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.679374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.681383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.683384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.685405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.687373] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [404.689151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [404.689166] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [404.689173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [404.689179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [404.689185] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [404.689191] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [404.689198] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [404.689205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [404.689212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [404.689240] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [404.689463] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [404.691182] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [404.691357] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [404.692960] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [404.693505] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [404.693634] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [404.694070] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [404.694156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [404.694160] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [404.694244] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [404.695586] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [404.695589] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [404.695675] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [404.720642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [404.720646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [404.720649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [404.720652] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [404.720655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [404.720658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [404.720661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [404.720665] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [404.720668] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [404.721034] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [404.721118] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [404.721556] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [404.721678] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [404.721692] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [404.725831] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [404.795238] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [404.796206] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [404.796977] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [404.797774] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [404.798551] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [405.923086] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [405.923776] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [405.928595] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [405.933431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [405.934215] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [405.935108] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [405.935970] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [405.940693] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [405.955274] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [405.957674] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [405.959630] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [405.964819] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [405.966629] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [405.978356] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [405.978600] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [405.978823] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [405.985323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.987389] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.989311] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.991363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.993375] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.995346] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.997372] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [405.999377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.003430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.005391] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.007330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.009368] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.011365] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.013322] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.015361] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.017392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [406.019123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [406.019140] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [406.019147] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [406.019153] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [406.019160] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [406.019166] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [406.019174] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [406.019182] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [406.019190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [406.019220] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [406.019458] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [406.021208] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [406.021398] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [406.023025] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [406.023973] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [406.024079] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [406.024316] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [406.024404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [406.024408] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [406.024496] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [406.025844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [406.025847] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [406.025933] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [406.050918] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [406.050922] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [406.050925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [406.050928] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [406.050931] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [406.050934] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [406.050944] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [406.050948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [406.050952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [406.051323] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [406.051419] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [406.051852] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [406.051934] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [406.051959] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [406.056174] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [406.131240] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [406.132202] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [406.133002] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [406.133727] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [406.134516] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [407.241634] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [407.242329] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [407.246941] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [407.251573] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [407.252248] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [407.253145] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [407.254047] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [407.258008] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [407.268794] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [407.270602] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [407.272073] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [407.276153] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [407.277540] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [407.287165] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [407.287522] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [407.287652] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [407.293624] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.295448] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.297445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.299439] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.301441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.303445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.305286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.307370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.311292] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.313137] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.315008] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.316860] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.318736] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.320567] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.322408] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.324425] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [407.326216] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [407.326240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [407.326254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [407.326268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [407.326281] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [407.326295] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [407.326312] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [407.326328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [407.326344] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [407.326401] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [407.326586] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [407.328060] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [407.328442] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [407.329740] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [407.330391] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [407.330486] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [407.330818] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [407.330911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [407.330915] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [407.331000] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [407.332237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [407.332240] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [407.332327] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [407.357880] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [407.357885] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [407.357888] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [407.357891] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [407.357894] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [407.357905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [407.357909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [407.357912] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [407.357916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [407.358177] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [407.358274] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [407.358612] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [407.358697] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [407.358709] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [407.362948] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [407.435227] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [407.436110] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [407.436779] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [407.437462] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [407.438112] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [408.765691] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [408.766347] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [408.770950] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [408.775461] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [408.776085] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [408.776928] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [408.777798] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [408.781801] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [408.792596] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [408.794462] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [408.795930] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [408.799979] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [408.801386] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [408.811006] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [408.811490] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [408.811773] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [408.817928] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.819947] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.821956] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.824048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.825922] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.827780] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.829654] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.831677] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.834200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.837243] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.839109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.840992] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.843078] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.844966] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.847051] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.848946] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.850967] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [408.852878] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [408.852916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [408.852933] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [408.852948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [408.852963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [408.852979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [408.853001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [408.853021] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [408.853041] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [408.853108] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [408.853304] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [408.854824] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [408.855282] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [408.856657] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [408.857372] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [408.857477] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [408.857826] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [408.857938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [408.857942] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [408.858034] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [408.859275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [408.859278] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [408.859362] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [408.884207] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [408.884211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [408.884214] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [408.884217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [408.884220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [408.884223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [408.884227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [408.884230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [408.884233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [408.884494] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [408.884579] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [408.884905] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [408.884984] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [408.884996] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [408.889212] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [408.963176] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [408.964057] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [408.964725] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [408.965430] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [408.966097] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [410.086779] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [410.087523] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [410.092440] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [410.097051] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [410.097843] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [410.098729] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [410.099650] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [410.104357] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [410.119026] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [410.121454] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [410.123380] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [410.129963] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [410.131769] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [410.142569] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [410.142799] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [410.143036] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [410.149337] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.151250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.153220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.155225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.157224] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.159189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.161174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.163225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.167265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.169191] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.171219] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.173220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.175187] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.177180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.179214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.181189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [410.182925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [410.182940] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [410.182947] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [410.182952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [410.182958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [410.182964] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [410.182971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [410.182979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [410.182986] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [410.183013] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [410.183218] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [410.184917] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [410.185079] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [410.186662] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [410.187184] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [410.187274] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [410.187709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [410.187794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [410.187798] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [410.187899] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [410.189247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [410.189250] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [410.189337] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [410.214341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [410.214346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [410.214349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [410.214352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [410.214355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [410.214358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [410.214361] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [410.214365] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [410.214368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [410.214732] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [410.214835] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [410.215276] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [410.215359] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [410.215371] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [410.219495] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [410.291104] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [410.292120] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [410.292919] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [410.293645] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [410.294423] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <6> [410.402306] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [410.402332] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [410.402342] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [410.402352] nvme 0000:05:00.0: [ 0] RxErr (First) <7> [411.407793] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [411.408470] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [411.413839] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [411.418579] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [411.419274] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [411.420030] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [411.420971] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [411.425620] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [411.439848] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [411.442176] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [411.444090] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [411.449470] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [411.451267] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [411.461099] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [411.461304] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [411.461500] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [411.467680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.469675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.471649] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.473630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.475617] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.477639] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.479699] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.481698] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.485800] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.487858] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.489904] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.491953] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.494012] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.496061] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.498134] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.500244] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [411.502177] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [411.502196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [411.502205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [411.502213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [411.502220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [411.502228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [411.502238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [411.502247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [411.502256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [411.502290] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [411.502574] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [411.504251] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [411.504485] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [411.506118] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [411.506681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [411.506777] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [411.507235] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [411.507321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [411.507324] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [411.507409] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [411.508762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [411.508766] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [411.508851] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [411.533812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [411.533816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [411.533819] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [411.533822] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [411.533825] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [411.533828] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [411.533832] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [411.533835] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [411.533839] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [411.534208] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [411.534303] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [411.534742] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [411.534838] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [411.534852] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [411.539016] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [411.611026] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [411.612042] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [411.612878] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [411.613835] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [411.614823] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [412.730759] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [412.731509] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [412.736406] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [412.741047] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [412.741770] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [412.742514] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [412.743330] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [412.746843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [412.757485] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [412.759430] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [412.760898] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000 <7> [412.765530] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [412.766935] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [412.776426] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [412.776810] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [412.777046] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [412.782456] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.784283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.786263] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.788253] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.790241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.792232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.794223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.796214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.798643] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.801440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.803255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.805094] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.807126] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.809129] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.811119] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.813123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.815127] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [412.816897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [412.816925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [412.816938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [412.816949] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [412.816960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [412.816971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [412.816985] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [412.816999] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [412.817012] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [412.817061] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [412.817357] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [412.818798] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [412.819124] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [412.820483] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [412.821059] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [412.821149] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [412.821479] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [412.821563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [412.821567] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [412.821651] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [412.822890] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [412.822893] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [412.822979] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [412.847840] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [412.847845] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [412.847848] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [412.847851] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [412.847854] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [412.847857] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [412.847860] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [412.847864] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [412.847867] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [412.848127] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [412.848211] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [412.848539] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [412.848620] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [412.848632] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [412.852754] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [412.857134] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [412.857251] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [412.857354] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.857455] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [412.857555] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [412.857654] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [412.857769] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [412.857964] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [412.858058] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [412.858149] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.858245] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [412.858341] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [412.858436] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [412.858530] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [412.858642] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [412.858731] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [412.858884] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [412.858975] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [412.859064] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.859165] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [412.859264] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [412.859359] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [412.859452] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [412.859556] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [412.859635] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [412.859737] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [412.859811] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [412.859883] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [412.859956] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [412.860027] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [412.860100] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [412.860185] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1 <7> [412.860285] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [412.860382] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [412.860478] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [412.860588] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [412.860701] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [412.860815] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [412.860908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [412.861007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [412.861104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [412.861199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [412.861292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [412.861384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [412.861477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [412.861568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [412.861659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [412.861765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [412.861859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [412.861950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [412.862041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [412.862129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [412.862217] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [412.862306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [412.862395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [412.862482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [412.862570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [412.862659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [412.862757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [412.862845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [412.862933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [412.863022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [412.863110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [412.863200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [412.863288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [412.863376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [412.863462] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [412.863548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [412.863635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [412.863732] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [412.863821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [412.863909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [412.863996] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [412.864083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [412.864169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [412.864255] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [412.864343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [412.864431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [412.864517] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [412.864603] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [412.864688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [412.864783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [412.864870] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [412.864957] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [412.865043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [412.865129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [412.865215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [412.865302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [412.865387] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [412.865474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [412.865562] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [412.865649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.865742] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.865829] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.865917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [412.866004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [412.866091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.866184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.866274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.866362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [412.866450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [412.866541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [412.866631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [412.866725] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [412.866814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [412.866903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [412.866990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [412.867077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [412.867481] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [412.867600] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [412.867697] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [412.868026] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [412.868114] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [412.868197] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [412.868277] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [412.868359] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [412.868439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [412.868516] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [412.868592] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [412.868669] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [412.868760] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [412.868839] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [412.868916] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [412.868992] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [412.869067] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [412.869142] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [412.869215] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [412.869507] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [412.869669] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [412.869959] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [412.870060] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [412.870150] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [412.875099] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [412.879837] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [412.880843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01 <7> [412.881283] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [412.882781] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [412.883333] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [412.890614] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [412.890754] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [412.897617] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [412.897898] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [412.899268] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [412.916941] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD <7> [412.933562] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [412.934453] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [412.939799] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [412.940152] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.940523] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [412.940908] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [412.941244] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [412.941561] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [412.942049] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [412.942337] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.942626] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [412.942934] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [412.943062] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [412.943199] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [412.943445] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [412.943794] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [412.944017] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.944245] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [412.944469] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [412.944685] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [412.944925] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [412.945160] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [412.945333] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [412.945496] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [412.945873] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [412.946055] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [412.946231] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B] <7> [412.946402] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [412.946572] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [412.946754] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3 <7> [412.946964] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [412.947104] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [412.947225] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [412.947379] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [412.947497] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [412.947607] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [412.947725] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [412.947876] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [412.947978] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [412.948072] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [412.948164] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [412.948270] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 594000 num active planes 1 <7> [412.948406] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [412.948532] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [412.948656] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [412.948815] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [412.948971] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3 <7> [412.949082] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3 <7> [412.949190] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset] <7> [412.949305] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [412.949418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [412.949526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [412.949631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [412.949772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [412.949895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [412.949995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [412.950090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [412.950183] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [412.950185] xe 0000:03:00.0: colorspace: RGB <7> [412.950187] xe 0000:03:00.0: scan mode: Underscan <7> [412.950188] xe 0000:03:00.0: colorimetry: No Data <7> [412.950189] xe 0000:03:00.0: picture aspect: 16:9 <7> [412.950191] xe 0000:03:00.0: active aspect: Same as Picture <7> [412.950192] xe 0000:03:00.0: itc: No Data <7> [412.950193] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [412.950194] xe 0000:03:00.0: quantization range: Default <7> [412.950196] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [412.950197] xe 0000:03:00.0: video code: 16 <7> [412.950198] xe 0000:03:00.0: ycc quantization range: Full <7> [412.950199] xe 0000:03:00.0: hdmi content type: Graphics <7> [412.950201] xe 0000:03:00.0: pixel repeat: 0 <7> [412.950202] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [412.950203] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [412.950205] xe 0000:03:00.0: vendor: Intel <7> [412.950206] xe 0000:03:00.0: product: Discrete gfx <7> [412.950207] xe 0000:03:00.0: source device information: PC General (0x9) <7> [412.950209] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [412.950210] xe 0000:03:00.0: empty frame <7> [412.950211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [412.950302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [412.950391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [412.950480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [412.950569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [412.950657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [412.950761] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [412.950877] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [412.950968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [412.951060] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [412.951150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [412.951241] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [412.951331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [412.951421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [412.951511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [412.951600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [412.951690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [412.951793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [412.951908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [412.951998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [412.952087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [412.952176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [412.952264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [412.952352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [412.952440] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [412.952530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [412.952623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [412.952720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [412.952826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [412.952916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [412.953004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [412.953092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [412.953181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [412.953269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [412.953356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [412.953444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [412.953531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [412.953618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [412.953714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [412.953827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.953915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.954003] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.954090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [412.954176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [412.954263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.954349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.954435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [412.954523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [412.954611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [412.954699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [412.954805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [412.954913] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no <7> [412.955002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no <7> [412.955089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no <7> [412.955176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no <7> [412.955263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no <7> [412.956163] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [412.956283] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [412.956389] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [412.956476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [412.956561] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [412.956642] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [412.956746] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [412.956839] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [412.956918] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [412.956997] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [412.957076] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [412.957153] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [412.957230] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [412.957308] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [412.957385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [412.957461] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [412.957536] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [412.957612] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [412.966414] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [412.966744] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [412.983320] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:269:pipe B] <7> [412.983528] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [412.986014] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [413.002743] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [413.005095] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe B], 36 bytes ELD <7> [413.019556] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [413.021646] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [413.022305] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [413.023313] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [413.024098] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <6> [413.031027] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [413.050374] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [413.052637] [IGT] xe_pm: exiting, ret=0 <6> [413.072575] Console: switching to colour frame buffer device 240x67

<6> [399.397065] Console: switching to colour dummy device 80x25

<7> [399.722945] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 0 val 0x2b2c292a

<7> [399.723258] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 1 val 0x2b2b2a2c

<7> [400.331530] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [400.435234] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<6> [400.457765] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [400.460626] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [400.460737] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [400.460834] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [400.460928] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [400.461020] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [400.461110] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [400.461211] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [400.461396] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [400.461482] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [400.461565] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [400.461654] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [400.461744] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [400.461831] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [400.461914] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [400.462021] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [400.462094] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [400.462192] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [400.462368] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [400.462455] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [400.462539] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [400.462628] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [400.462718] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [400.462805] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [400.462891] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [400.462989] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [400.463061] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [400.463145] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [400.463273] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [400.463341] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [400.463405] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.463469] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.463534] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.463597] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.463660] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [400.463722] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [400.463801] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [400.463892] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [400.463979] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [400.464063] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [400.464182] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [400.464346] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [400.464445] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [400.464535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [400.464629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [400.464845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [400.465058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [400.465336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [400.465578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [400.465811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [400.466041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [400.466299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [400.466523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [400.466742] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [400.466960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [400.467198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [400.467418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [400.467640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [400.467858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [400.468079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [400.468333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [400.468553] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [400.468766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [400.468976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [400.469201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [400.469427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [400.469630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [400.469828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [400.470028] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [400.470240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [400.470422] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [400.470598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [400.470773] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [400.470939] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [400.471109] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [400.471302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [400.471463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [400.471624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [400.471783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [400.471938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [400.472097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [400.472275] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [400.472424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [400.472568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [400.472709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [400.472850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [400.472991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [400.473135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [400.473267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [400.473396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [400.473525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [400.473668] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [400.473795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [400.473918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [400.474042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [400.474192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [400.474312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.474427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.474541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.474653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [400.474765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [400.474873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.474982] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.475091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.475212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [400.475314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [400.475416] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [400.475515] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [400.475613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [400.475712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [400.475808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [400.475903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [400.477118] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A]

<7> [400.500808] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [400.501553] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [400.517398] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [400.520303] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [400.522894] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [400.523720] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [400.524194] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [400.524635] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [400.525023] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [400.525414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [400.525759] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [400.526363] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [400.526409] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [400.527328] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [400.526932] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [400.527543] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [400.527851] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [400.528167] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [400.528447] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [400.528720] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [400.529208] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [400.529462] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [400.529697] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [400.531766] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [400.532165] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [400.537654] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [400.538203] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [400.538706] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [400.539180] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [400.540372] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [400.540571] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [400.540766] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [400.540950] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [400.541351] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [400.541576] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [400.541830] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [400.541977] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [400.542150] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [400.542311] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [400.542464] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [400.542605] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [400.542806] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [400.542937] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [400.543078] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [400.543228] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [400.543359] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [400.543483] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [400.543631] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [400.543732] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [400.543852] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [400.543950] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [400.544047] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.544145] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.544229] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.544312] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.544405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [400.544517] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [400.544624] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [400.544727] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [400.544839] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [400.544952] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3

<7> [400.545048] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3

<7> [400.545147] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset]

<7> [400.545251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [400.545348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [400.545443] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [400.545535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [400.545627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [400.545719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [400.545812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [400.545905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [400.545994] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [400.545997] xe 0000:03:00.0: scan mode: Underscan

<7> [400.545999] xe 0000:03:00.0: colorimetry: No Data

<7> [400.546000] xe 0000:03:00.0: picture aspect: 16:9

<7> [400.546002] xe 0000:03:00.0: active aspect: Same as Picture

<7> [400.546005] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [400.546006] xe 0000:03:00.0: quantization range: Default

<7> [400.546008] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [400.546011] xe 0000:03:00.0: ycc quantization range: Full

<7> [400.546012] xe 0000:03:00.0: hdmi content type: Graphics

<7> [400.546015] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [400.546017] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [400.546020] xe 0000:03:00.0: product: Discrete gfx

<7> [400.546021] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [400.546023] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [400.546026] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [400.546116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [400.546220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [400.546309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [400.546398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [400.546487] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [400.546576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [400.546664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [400.546753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [400.546842] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [400.546933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [400.547023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [400.547113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [400.547217] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [400.547307] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [400.547396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [400.547483] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [400.547570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [400.547657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [400.547743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [400.547830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [400.547918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [400.548006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [400.548096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [400.548195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [400.548284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [400.548372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [400.548460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [400.548547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [400.548635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [400.548722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [400.548811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [400.548899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [400.548986] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [400.549074] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [400.549171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [400.549261] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [400.549350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [400.549436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [400.549524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.549611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.549698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.549785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [400.549873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [400.549963] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.550050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.550143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [400.550232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [400.550319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [400.550408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [400.550496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no

<7> [400.550583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no

<7> [400.550670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no

<7> [400.550757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no

<7> [400.550844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no

<7> [400.551372] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe B]

<7> [400.571042] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [400.571787] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [400.583931] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [400.589389] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:269:pipe B]

<7> [400.591710] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [400.592360] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [400.592639] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [400.592906] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [400.593390] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [400.593628] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [400.593870] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [400.594113] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [400.594575] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [400.594781] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [400.594979] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [400.595198] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [400.595397] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [400.595793] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [400.595970] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [400.596161] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [400.596329] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [400.596719] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [400.596881] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [400.597251] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [400.597707] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [400.597888] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [400.598308] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [400.598742] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [400.598896] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]

<7> [400.627230] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [400.628204] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.628982] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.629759] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.630523] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [401.944207] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [401.945278] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [401.949822] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [401.954320] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [401.954714] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [401.955460] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [401.956061] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [401.959846] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [401.970001] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [401.971602] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [401.973042] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [401.976954] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [401.978268] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [401.986922] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [401.987208] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [401.987339] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [401.992218] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [401.994040] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [401.995910] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [401.997884] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [401.999758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.001635] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.003611] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.005463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.008989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.010832] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.012830] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.014842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.016842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.018855] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.020857] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.022854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [402.024608] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [402.024624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [402.024634] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [402.024642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [402.024651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [402.024660] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [402.024671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [402.024681] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [402.024691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [402.024734] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [402.024998] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [402.026310] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [402.026581] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [402.028064] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [402.028643] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [402.028799] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [402.029136] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [402.029222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [402.029225] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [402.029310] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [402.030552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [402.030555] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [402.030643] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [402.055497] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [402.055502] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [402.055505] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [402.055508] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [402.055511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [402.055514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [402.055517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [402.055521] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [402.055524] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [402.055780] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [402.055872] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [402.056203] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [402.056289] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [402.056301] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [402.060528] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [402.131324] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [402.132460] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [402.133206] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [402.134214] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [402.135157] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [403.271057] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [403.271209] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [403.275394] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [403.280247] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [403.280834] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [403.281557] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [403.282277] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [403.286980] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [403.301450] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [403.303821] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [403.305977] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [403.310859] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [403.312401] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [403.322284] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [403.322479] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [403.322655] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [403.328868] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.330793] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.332720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.334650] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.336568] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.338513] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.340348] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.342370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.346382] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.348342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.350299] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.352324] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.354291] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.356485] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.358360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.360377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [403.362105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [403.362118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [403.362125] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [403.362132] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [403.362138] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [403.362145] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [403.362153] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [403.362161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [403.362168] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [403.362197] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [403.362434] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [403.364112] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [403.364319] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [403.365932] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [403.366493] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [403.366594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [403.367040] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [403.367126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [403.367130] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [403.367215] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [403.368560] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [403.368566] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [403.368690] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [403.394316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [403.394321] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [403.394324] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [403.394327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [403.394330] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [403.394333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [403.394337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [403.394341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [403.394344] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [403.394510] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [403.394608] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [403.395052] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [403.395140] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [403.395152] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [403.399279] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [403.467305] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [403.468275] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [403.469063] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [403.469802] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [403.470587] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [404.597739] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [404.598454] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [404.603167] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [404.607807] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [404.608391] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [404.609081] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [404.609769] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [404.613861] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [404.628085] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [404.630387] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [404.632275] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [404.637585] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [404.639331] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [404.648738] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [404.648916] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [404.649091] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [404.655210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.657235] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.659250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.661264] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.663290] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.665309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.667324] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.669333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.673366] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.675377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.677364] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.679374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.681383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.683384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.685405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.687373] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [404.689151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [404.689166] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [404.689173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [404.689179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [404.689185] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [404.689191] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [404.689198] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [404.689205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [404.689212] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [404.689240] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [404.689463] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [404.691182] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [404.691357] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [404.692960] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [404.693505] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [404.693634] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [404.694070] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [404.694156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [404.694160] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [404.694244] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [404.695586] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [404.695589] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [404.695675] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [404.720642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [404.720646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [404.720649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [404.720652] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [404.720655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [404.720658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [404.720661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [404.720665] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [404.720668] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [404.721034] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [404.721118] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [404.721556] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [404.721678] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [404.721692] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [404.725831] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [404.795238] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [404.796206] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [404.796977] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [404.797774] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [404.798551] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [405.923086] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [405.923776] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [405.928595] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [405.933431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [405.934215] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [405.935108] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [405.935970] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [405.940693] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [405.955274] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [405.957674] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [405.959630] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [405.964819] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [405.966629] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [405.978356] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [405.978600] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [405.978823] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [405.985323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.987389] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.989311] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.991363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.993375] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.995346] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.997372] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [405.999377] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.003430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.005391] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.007330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.009368] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.011365] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.013322] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.015361] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.017392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [406.019123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [406.019140] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [406.019147] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [406.019153] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [406.019160] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [406.019166] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [406.019174] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [406.019182] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [406.019190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [406.019220] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [406.019458] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [406.021208] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [406.021398] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [406.023025] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [406.023973] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [406.024079] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [406.024316] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [406.024404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [406.024408] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [406.024496] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [406.025844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [406.025847] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [406.025933] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [406.050918] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [406.050922] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [406.050925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [406.050928] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [406.050931] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [406.050934] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [406.050944] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [406.050948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [406.050952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [406.051323] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [406.051419] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [406.051852] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [406.051934] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [406.051959] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [406.056174] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [406.131240] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [406.132202] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [406.133002] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [406.133727] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [406.134516] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [407.241634] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [407.242329] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [407.246941] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [407.251573] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [407.252248] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [407.253145] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [407.254047] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [407.258008] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [407.268794] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [407.270602] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [407.272073] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [407.276153] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [407.277540] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [407.287165] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [407.287522] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [407.287652] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [407.293624] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.295448] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.297445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.299439] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.301441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.303445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.305286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.307370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.311292] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.313137] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.315008] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.316860] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.318736] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.320567] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.322408] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.324425] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [407.326216] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [407.326240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [407.326254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [407.326268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [407.326281] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [407.326295] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [407.326312] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [407.326328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [407.326344] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [407.326401] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [407.326586] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [407.328060] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [407.328442] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [407.329740] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [407.330391] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [407.330486] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [407.330818] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [407.330911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [407.330915] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [407.331000] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [407.332237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [407.332240] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [407.332327] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [407.357880] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [407.357885] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [407.357888] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [407.357891] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [407.357894] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [407.357905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [407.357909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [407.357912] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [407.357916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [407.358177] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [407.358274] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [407.358612] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [407.358697] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [407.358709] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [407.362948] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [407.435227] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [407.436110] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [407.436779] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [407.437462] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [407.438112] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [408.765691] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [408.766347] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [408.770950] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [408.775461] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [408.776085] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [408.776928] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [408.777798] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [408.781801] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [408.792596] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [408.794462] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [408.795930] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [408.799979] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [408.801386] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [408.811006] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [408.811490] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [408.811773] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [408.817928] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.819947] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.821956] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.824048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.825922] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.827780] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.829654] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.831677] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.834200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.837243] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.839109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.840992] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.843078] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.844966] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.847051] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.848946] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.850967] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [408.852878] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [408.852916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [408.852933] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [408.852948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [408.852963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [408.852979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [408.853001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [408.853021] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [408.853041] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [408.853108] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [408.853304] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [408.854824] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [408.855282] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [408.856657] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [408.857372] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [408.857477] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [408.857826] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [408.857938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [408.857942] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [408.858034] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [408.859275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [408.859278] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [408.859362] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [408.884207] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [408.884211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [408.884214] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [408.884217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [408.884220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [408.884223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [408.884227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [408.884230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [408.884233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [408.884494] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [408.884579] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [408.884905] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [408.884984] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [408.884996] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [408.889212] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [408.963176] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [408.964057] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [408.964725] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [408.965430] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [408.966097] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [410.086779] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [410.087523] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [410.092440] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [410.097051] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [410.097843] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [410.098729] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [410.099650] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [410.104357] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [410.119026] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [410.121454] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [410.123380] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [410.129963] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [410.131769] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [410.142569] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [410.142799] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [410.143036] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [410.149337] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.151250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.153220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.155225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.157224] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.159189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.161174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.163225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.167265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.169191] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.171219] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.173220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.175187] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.177180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.179214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.181189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [410.182925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [410.182940] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [410.182947] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [410.182952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [410.182958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [410.182964] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [410.182971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [410.182979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [410.182986] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [410.183013] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [410.183218] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [410.184917] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [410.185079] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [410.186662] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [410.187184] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [410.187274] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [410.187709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [410.187794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [410.187798] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [410.187899] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [410.189247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [410.189250] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [410.189337] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [410.214341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [410.214346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [410.214349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [410.214352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [410.214355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [410.214358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [410.214361] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [410.214365] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [410.214368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [410.214732] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [410.214835] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [410.215276] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [410.215359] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [410.215371] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [410.219495] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [410.291104] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [410.292120] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [410.292919] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [410.293645] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [410.294423] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<6> [410.402306] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [410.402332] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [410.402342] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [410.402352] nvme 0000:05:00.0: [ 0] RxErr (First)

<7> [411.407793] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [411.408470] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [411.413839] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [411.418579] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [411.419274] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [411.420030] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [411.420971] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [411.425620] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [411.439848] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [411.442176] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [411.444090] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [411.449470] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [411.451267] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [411.461099] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [411.461304] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [411.461500] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [411.467680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.469675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.471649] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.473630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.475617] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.477639] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.479699] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.481698] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.485800] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.487858] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.489904] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.491953] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.494012] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.496061] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.498134] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.500244] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [411.502177] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [411.502196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [411.502205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [411.502213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [411.502220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [411.502228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [411.502238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [411.502247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [411.502256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [411.502290] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [411.502574] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [411.504251] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [411.504485] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [411.506118] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [411.506681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [411.506777] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [411.507235] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [411.507321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [411.507324] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [411.507409] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [411.508762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [411.508766] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [411.508851] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [411.533812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [411.533816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [411.533819] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [411.533822] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [411.533825] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [411.533828] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [411.533832] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [411.533835] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [411.533839] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [411.534208] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [411.534303] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [411.534742] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [411.534838] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [411.534852] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [411.539016] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [411.611026] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [411.612042] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [411.612878] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [411.613835] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [411.614823] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [412.730759] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [412.731509] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [412.736406] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [412.741047] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [412.741770] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [412.742514] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [412.743330] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [412.746843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [412.757485] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [412.759430] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [412.760898] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000

<7> [412.765530] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [412.766935] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [412.776426] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [412.776810] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [412.777046] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [412.782456] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.784283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.786263] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.788253] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.790241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.792232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.794223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.796214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.798643] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.801440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.803255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.805094] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.807126] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.809129] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.811119] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.813123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.815127] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [412.816897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [412.816925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [412.816938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [412.816949] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [412.816960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [412.816971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [412.816985] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [412.816999] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [412.817012] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [412.817061] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [412.817357] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [412.818798] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [412.819124] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [412.820483] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [412.821059] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [412.821149] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [412.821479] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [412.821563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [412.821567] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [412.821651] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [412.822890] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [412.822893] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [412.822979] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [412.847840] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [412.847845] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [412.847848] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [412.847851] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [412.847854] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [412.847857] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [412.847860] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [412.847864] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [412.847867] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [412.848127] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [412.848211] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [412.848539] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [412.848620] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [412.848632] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [412.852754] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [412.857134] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [412.857251] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [412.857354] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.857455] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [412.857555] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.857654] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [412.857769] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [412.857964] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [412.858058] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [412.858149] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.858245] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [412.858341] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.858436] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [412.858530] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [412.858642] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [412.858731] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [412.858884] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [412.858975] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [412.859064] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.859165] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [412.859264] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.859359] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [412.859452] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [412.859556] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [412.859635] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [412.859737] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [412.859811] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [412.859883] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [412.859956] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [412.860027] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [412.860100] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [412.860185] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1

<7> [412.860285] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [412.860382] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [412.860478] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [412.860588] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [412.860701] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [412.860815] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [412.860908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [412.861007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [412.861104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [412.861199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [412.861292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [412.861384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [412.861477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [412.861568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [412.861659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [412.861765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [412.861859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [412.861950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [412.862041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [412.862129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [412.862217] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [412.862306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [412.862395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [412.862482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [412.862570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [412.862659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [412.862757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [412.862845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [412.862933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [412.863022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [412.863110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [412.863200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [412.863288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [412.863376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [412.863462] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [412.863548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [412.863635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [412.863732] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [412.863821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [412.863909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [412.863996] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [412.864083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [412.864169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [412.864255] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [412.864343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [412.864431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [412.864517] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [412.864603] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [412.864688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [412.864783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [412.864870] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [412.864957] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [412.865043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [412.865129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [412.865215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [412.865302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [412.865387] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [412.865474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [412.865562] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [412.865649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.865742] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.865829] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.865917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [412.866004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [412.866091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.866184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.866274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.866362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [412.866450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [412.866541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [412.866631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [412.866725] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [412.866814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [412.866903] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [412.866990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [412.867077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [412.867481] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [412.867600] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [412.867697] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [412.868026] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [412.868114] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [412.868197] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [412.868277] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [412.868359] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [412.868439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [412.868516] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [412.868592] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [412.868669] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [412.868760] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [412.868839] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [412.868916] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [412.868992] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [412.869067] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [412.869142] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [412.869215] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [412.869507] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [412.869669] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [412.869959] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [412.870060] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [412.870150] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [412.875099] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [412.879837] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [412.880843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01

<7> [412.881283] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [412.882781] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [412.883333] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [412.890614] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [412.890754] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [412.897617] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [412.897898] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [412.899268] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [412.916941] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD

<7> [412.933562] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [412.934453] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [412.939799] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [412.940152] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.940523] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [412.940908] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.941244] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [412.941561] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [412.942049] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [412.942337] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.942626] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [412.942934] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.943062] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [412.943199] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [412.943445] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [412.943794] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [412.944017] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.944245] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [412.944469] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.944685] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [412.944925] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [412.945160] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [412.945333] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [412.945496] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [412.945873] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [412.946055] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [412.946231] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe B]

<7> [412.946402] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [412.946572] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [412.946754] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing TC PLL 3

<7> [412.946964] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [412.947104] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [412.947225] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [412.947379] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [412.947497] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [412.947607] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [412.947725] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [412.947876] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [412.947978] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [412.948072] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [412.948164] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [412.948270] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 594000 num active planes 1

<7> [412.948406] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [412.948532] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [412.948656] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [412.948815] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [412.948971] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated TC PLL 3

<7> [412.949082] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving TC PLL 3

<7> [412.949190] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset]

<7> [412.949305] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [412.949418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [412.949526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [412.949631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [412.949772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [412.949895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [412.949995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [412.950090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [412.950183] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [412.950187] xe 0000:03:00.0: scan mode: Underscan

<7> [412.950188] xe 0000:03:00.0: colorimetry: No Data

<7> [412.950189] xe 0000:03:00.0: picture aspect: 16:9

<7> [412.950191] xe 0000:03:00.0: active aspect: Same as Picture

<7> [412.950193] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [412.950194] xe 0000:03:00.0: quantization range: Default

<7> [412.950196] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [412.950198] xe 0000:03:00.0: ycc quantization range: Full

<7> [412.950199] xe 0000:03:00.0: hdmi content type: Graphics

<7> [412.950202] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [412.950203] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [412.950206] xe 0000:03:00.0: product: Discrete gfx

<7> [412.950207] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [412.950209] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [412.950211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [412.950302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [412.950391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [412.950480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [412.950569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [412.950657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [412.950761] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [412.950877] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [412.950968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [412.951060] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [412.951150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [412.951241] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [412.951331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [412.951421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [412.951511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [412.951600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [412.951690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [412.951793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [412.951908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [412.951998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [412.952087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [412.952176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [412.952264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [412.952352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [412.952440] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [412.952530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [412.952623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [412.952720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [412.952826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [412.952916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [412.953004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [412.953092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [412.953181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [412.953269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [412.953356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [412.953444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [412.953531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [412.953618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [412.953714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [412.953827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.953915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.954003] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.954090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [412.954176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [412.954263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.954349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.954435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [412.954523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [412.954611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:556] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [412.954699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [412.954805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [412.954913] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no

<7> [412.955002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no

<7> [412.955089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no

<7> [412.955176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no

<7> [412.955263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no

<7> [412.956163] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [412.956283] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [412.956389] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [412.956476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [412.956561] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [412.956642] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [412.956746] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [412.956839] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [412.956918] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [412.956997] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [412.957076] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [412.957153] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [412.957230] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [412.957308] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [412.957385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [412.957461] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [412.957536] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [412.957612] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [412.966414] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [412.966744] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [412.983320] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:269:pipe B]

<7> [412.983528] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [412.986014] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [413.002743] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [413.005095] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe B], 36 bytes ELD

<7> [413.019556] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [413.021646] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [413.022305] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [413.023313] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [413.024098] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]

<6> [413.031027] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [413.050374] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [413.072575] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram