<5>[ 0.000000] Linux version 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Apr 2 15:13:22 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] printk: legacy bootconsole [earlyser0] enabled <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.004096] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.004100] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.009583] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.018030] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.025272] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.030795] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.040688] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.048392] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.048412] Using GB pages for direct mapping <6>[ 0.053432] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.060872] printk: early log buf free: 258368(98%) <6>[ 0.065753] Secure boot disabled <6>[ 0.068976] ACPI: Early table checksum verification disabled <6>[ 0.074641] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.080389] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.088926] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.097461] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.105997] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.110614] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.119152] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.127688] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.136225] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.144762] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.153300] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.161837] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.170372] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.178908] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.187446] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.195984] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.204519] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.213058] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.221593] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.230127] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.238666] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.247203] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.255737] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.264274] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.272814] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.281349] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.289889] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.298422] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.306963] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.315499] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.324036] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.332570] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.341107] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.349646] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.358183] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.366718] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.375254] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.383791] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.392329] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.400865] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.409402] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.417938] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.426475] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.435011] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.443547] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.452086] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.460621] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.469158] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.477696] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.486230] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.494767] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.501825] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.508881] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.515937] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.522991] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.530047] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.537105] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.544159] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.551214] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.558269] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.565323] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.572382] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.579435] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.586493] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.593548] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.600604] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.607657] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.614716] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.621768] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.628830] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.635882] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.642939] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.649992] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.657049] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.664103] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.671159] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.678215] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.685271] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.692324] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.699382] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.706437] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.713494] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.720552] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.727603] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.734660] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.741715] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.748772] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.755825] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.762882] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.769938] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.776994] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.784051] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.791107] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.798164] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.805218] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.812276] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.819331] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.826387] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.833512] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.839138] No NUMA configuration found <6>[ 0.842831] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.849542] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.856118] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.860075] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.866393] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.873314] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.879677] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.886294] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.892737] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.897882] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.897889] TSC deadline timer available <6>[ 0.901802] CPU topo: Max. logical packages: 1 <6>[ 0.906416] CPU topo: Max. logical nodes: 1 <6>[ 0.911031] CPU topo: Num. nodes per package: 1 <6>[ 0.915647] CPU topo: Max. logical dies: 1 <6>[ 0.920263] CPU topo: Max. dies per package: 1 <6>[ 0.924882] CPU topo: Max. threads per core: 1 <6>[ 0.929498] CPU topo: Num. cores per package: 8 <6>[ 0.934383] CPU topo: Num. threads per package: 8 <6>[ 0.939255] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.945360] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.952928] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.960510] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.968088] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.975665] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.983242] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.990911] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.997009] Booting paravirtualized kernel on bare hardware <6>[ 1.002587] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 1.013071] Zone ranges: <6>[ 1.015561] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 1.021748] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 1.027932] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 1.034117] Device empty <6>[ 1.036993] Movable zone start for each node <6>[ 1.041264] Early memory node ranges <6>[ 1.044830] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 1.051104] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 1.057376] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 1.063649] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 1.069920] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 1.076978] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 1.082826] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 1.090315] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 1.124456] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 1.130773] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 1.137132] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 1.145129] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 1.151612] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 1.151614] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 1.151632] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <7>[ 1.191170] blacklisting initcall simpledrm_platform_driver_init <5>[ 1.191204] random: crng init done <6>[ 1.196293] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 1.205160] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 1.213093] software IO TLB: area num 8. <6>[ 1.224329] Fallback order for Node 0: 0 <6>[ 1.224333] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 1.235088] Policy zone: Normal <6>[ 1.238230] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 1.244405] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 1.251200] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 1.260059] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 1.298477] ********************************************************** <4>[ 1.304875] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.311405] ** ** <4>[ 1.317940] ** This system shows unhashed kernel memory addresses ** <4>[ 1.324473] ** via the console, logs, and other interfaces. This ** <4>[ 1.331006] ** might reduce the security of your system. ** <4>[ 1.337536] ** ** <4>[ 1.344072] ** If you see this message and you are not debugging ** <4>[ 1.350605] ** the kernel, report this immediately to your system ** <4>[ 1.357140] ** administrator! ** <4>[ 1.363672] ** ** <4>[ 1.370203] ** Use hash_pointers=always to force this mode off ** <4>[ 1.376736] ** ** <4>[ 1.383271] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.389804] ********************************************************** <6>[ 1.397409] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 1.412223] ftrace: allocating 61451 entries in 242 pages <6>[ 1.417487] ftrace: allocated 242 pages with 5 groups <6>[ 1.423589] Dynamic Preempt: lazy <6>[ 1.427271] Running RCU self tests <6>[ 1.430529] Running RCU synchronous self tests <6>[ 1.434973] rcu: Preemptible hierarchical RCU implementation. <6>[ 1.440719] rcu: RCU lockdep checking is enabled. <6>[ 1.445510] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 1.452307] Trampoline variant of Tasks RCU enabled. <6>[ 1.457358] Rude variant of Tasks RCU enabled. <6>[ 1.461890] Tracing variant of Tasks RCU enabled. <6>[ 1.466679] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 1.474345] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 1.481116] Running RCU synchronous self tests <6>[ 1.485499] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.494207] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.514503] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 1.520934] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 1.528100] Console: colour dummy device 80x25 <6>[ 1.532410] printk: legacy console [tty0] enabled <6>[ 1.538370] printk: legacy console [ttyS0] enabled <6>[ 1.547852] printk: legacy bootconsole [earlyser0] disabled <6>[ 1.559030] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 1.566942] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 1.571076] ... MAX_LOCK_DEPTH: 48 <6>[ 1.575295] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 1.579693] ... CLASSHASH_SIZE: 4096 <6>[ 1.584088] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 1.588652] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 1.593217] ... CHAINHASH_SIZE: 262144 <6>[ 1.597781] memory used by lock dependency info: 54145 kB <6>[ 1.603306] memory used for stack traces: 4224 kB <6>[ 1.608138] per task-struct memory footprint: 1920 bytes <6>[ 1.613625] ACPI: Core revision 20251212 <6>[ 1.618473] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 1.624319] APIC: Switch to symmetric I/O mode setup <6>[ 1.629326] DMAR: Host address width 38 <6>[ 1.633200] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 1.638579] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.647445] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 1.652821] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.661686] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 1.667053] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 1.675918] DMAR: SATC flags: 0x1 <6>[ 1.679278] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 1.685676] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 1.691115] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 1.701821] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 1.712323] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 1.722917] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 1.723911] CPU0: Thermal monitoring enabled (TM1) <6>[ 1.723911] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 1.723911] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 1.723911] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 1.723911] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 1.723911] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 1.723911] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 1.723911] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 1.723911] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 1.723911] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 1.723911] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 1.723911] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 1.723911] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 1.723911] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 1.723911] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 1.723911] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 1.723911] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 1.723911] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 1.723911] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 1.723911] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 1.723911] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 1.723911] Freeing SMP alternatives memory: 56K <6>[ 1.723911] pid_max: default: 32768 minimum: 301 <6>[ 1.723911] landlock: Up and running. <6>[ 1.723911] Yama: becoming mindful. <6>[ 1.723911] AppArmor: AppArmor initialized <6>[ 1.723911] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.723911] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.723911] VFS: Finished mounting rootfs on nullfs <6>[ 1.723911] Running RCU synchronous self tests <6>[ 1.723911] Running RCU synchronous self tests <6>[ 1.723911] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 1.724511] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 1.725077] core: cpu_core PMU driver: <6>[ 1.725916] ... version: 6 <6>[ 1.726921] ... bit width: 48 <6>[ 1.727915] ... generic counters: 10 <6>[ 1.728915] ... generic bitmap: 00000000000003ff <6>[ 1.729916] ... fixed-purpose counters: 4 <6>[ 1.730915] ... fixed-purpose bitmap: 000000000000000f <6>[ 1.731916] ... value mask: 0000ffffffffffff <6>[ 1.732916] ... max period: 00007fffffffffff <6>[ 1.733916] ... global_ctrl mask: 0001000f000003ff <6>[ 1.734990] signal: max sigframe size: 3632 <6>[ 1.735937] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 1.737025] rcu: Hierarchical SRCU implementation. <6>[ 1.737918] rcu: Max phase no-delay instances is 400. <6>[ 1.739082] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 1.741932] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 1.743217] smp: Bringing up secondary CPUs ... <6>[ 1.744321] smpboot: x86: Booting SMP configuration: <6>[ 1.744923] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.196053] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.196053] core: cpu_atom PMU driver: <6>[ 0.196053] ... version: 6 <6>[ 0.196053] ... bit width: 48 <6>[ 0.196053] ... generic counters: 8 <6>[ 0.196053] ... generic bitmap: 00000000000000ff <6>[ 0.196053] ... fixed-purpose counters: 6 <6>[ 0.196053] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.196053] ... value mask: 0000ffffffffffff <6>[ 0.196053] ... max period: 00007fffffffffff <6>[ 0.196053] ... global_ctrl mask: 00000077000000ff <6>[ 1.814051] smp: Brought up 1 node, 8 CPUs <6>[ 1.815313] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 1.818410] Memory: 32297416K/33158528K available (25943K kernel code, 5830K rwdata, 9724K rodata, 5780K init, 67896K bss, 837300K reserved, 0K cma-reserved) <6>[ 1.834023] devtmpfs: initialized <6>[ 1.837522] x86/mm: Memory block size: 128MB <6>[ 1.880181] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 1.888996] Running RCU synchronous self tests <6>[ 1.893943] Running RCU synchronous self tests <6>[ 1.899200] Running RCU Tasks wait API self tests <6>[ 1.903967] Running RCU Tasks Rude wait API self tests <6>[ 1.908928] Running RCU Tasks Trace wait API self tests <6>[ 1.915021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 1.924074] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 1.932043] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 1.942714] PM: RTC time: 02:11:56, date: 2026-04-03 <6>[ 1.942932] Callback from call_rcu_tasks_trace() invoked. <6>[ 1.944923] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 1.953014] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 1.960362] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 1.968349] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 1.976046] audit: initializing netlink subsys (disabled) <5>[ 1.982219] audit: type=2000 audit(1775182316.259:1): state=initialized audit_enabled=0 res=1 <6>[ 1.983288] thermal_sys: Registered thermal governor 'fair_share' <6>[ 1.990931] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 1.996924] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.002921] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.008920] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 2.015014] cpuidle: using governor ladder <6>[ 2.025939] cpuidle: using governor menu <6>[ 2.033789] efi: Freeing EFI boot services memory: 59312K <6>[ 2.038935] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.045690] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 2.054978] PCI: Using configuration type 1 for base access <6>[ 2.060159] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.072191] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 2.078997] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 2.085964] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.093016] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.105169] raid6: skipped pq benchmark and selected avx2x4 <6>[ 2.110927] raid6: using avx2x2 recovery algorithm <6>[ 2.116797] fbcon: Taking over console <6>[ 2.121145] ACPI: Added _OSI(Module Device) <6>[ 2.121146] ACPI: Added _OSI(Processor Device) <6>[ 2.121147] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 2.125946] Callback from call_rcu_tasks() invoked. <6>[ 2.652625] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 2.667598] ACPI: EC: EC started <6>[ 2.667912] ACPI: EC: interrupt blocked <6>[ 2.671678] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.671916] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 2.950779] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 2.973546] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 2.986399] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 2.994016] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 3.085644] ACPI: Interpreter enabled <6>[ 3.089300] ACPI: PM: (supports S0 S4 S5) <6>[ 3.094716] ACPI: Using IOAPIC for interrupt routing <6>[ 3.113222] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.122934] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.187683] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 3.191991] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 3.293362] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 3.300903] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 3.316922] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.745602] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.774459] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 3.937238] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 3.946597] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 3.966559] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 3.992959] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.994270] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.995429] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.307852] ACPI: \_TZ_.FN00: New power resource <6>[ 4.308551] ACPI: \_TZ_.FN01: New power resource <6>[ 4.309692] ACPI: \_TZ_.FN02: New power resource <6>[ 4.310510] ACPI: \_TZ_.FN03: New power resource <6>[ 4.311493] ACPI: \_TZ_.FN04: New power resource <6>[ 4.313502] ACPI: \PIN_: New power resource <6>[ 4.317464] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 4.318100] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 4.322419] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 4.332786] PCI host bridge to bus 0000:00 <6>[ 4.333398] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.333919] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.334918] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.335949] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 4.337308] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 4.337920] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.342073] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 4.343865] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 4.344005] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 4.344919] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 4.345925] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 4.346958] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.349339] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 4.349969] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 4.352527] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 4.352942] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 4.353946] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 4.355978] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 4.356958] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.357956] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 4.358946] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 4.360039] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.360989] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 4.366458] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 4.366986] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.367977] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.368935] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 4.370044] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 4.371016] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 4.376354] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 4.376987] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.378245] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.378935] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 4.380041] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 4.380993] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 4.386256] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 4.386980] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 4.388387] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.389198] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 4.389941] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 4.390947] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 4.392527] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.392966] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 4.393986] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.397018] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.397965] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 4.398922] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 4.399972] pci 0000:00:0d.2: supports D1 D2 <6>[ 4.400915] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.403342] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.403965] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 4.404919] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 4.405972] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.406915] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.409357] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 4.409999] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 4.411052] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.414574] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.415031] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 4.416279] pci 0000:00:13.0: PME# supported from D3hot <6>[ 4.417460] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.417966] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 4.419015] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.421964] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 4.423003] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 4.424152] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 4.425268] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.426010] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.438221] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.438990] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.465069] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.466262] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.480489] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.480994] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.493420] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.494006] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 4.495013] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.498663] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 4.498945] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.499919] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 4.500919] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 4.502041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 4.502989] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 4.508824] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 4.509019] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.509954] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 4.511256] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 4.512114] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 4.518186] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 4.520525] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 4.521026] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 4.521926] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 4.523086] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.525334] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 4.525984] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 4.526957] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 4.529393] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.530095] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 4.531433] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.532527] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.533116] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.534152] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 4.535003] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 4.535922] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 4.536920] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 4.538100] pci 0000:7f:00.0: supports D1 D2 <6>[ 4.538915] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.540606] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 4.543097] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.544380] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 4.545134] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 4.546302] pci 0000:80:00.0: 15.753 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) <6>[ 4.548196] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 4.549146] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.987420] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 4.993987] Low-power S0 idle used by default for system suspend <6>[ 5.091916] ACPI: EC: interrupt unblocked <6>[ 5.096927] ACPI: EC: event unblocked <6>[ 5.099955] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 5.104923] ACPI: EC: GPE=0x6e <6>[ 5.108930] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 5.115936] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 5.123997] iommu: Default domain type: Translated <6>[ 5.128924] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 5.137848] SCSI subsystem initialized <7>[ 5.141018] libata version 3.00 loaded. <6>[ 5.141246] ACPI: bus type USB registered <6>[ 5.146150] usbcore: registered new interface driver usbfs <6>[ 5.151007] usbcore: registered new interface driver hub <6>[ 5.157006] usbcore: registered new device driver usb <6>[ 5.162177] pps_core: LinuxPPS API ver. 1 registered <6>[ 5.166921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 5.175954] PTP clock support registered <6>[ 5.180988] EDAC MC: Ver: 3.0.0 <6>[ 5.185167] efivars: Registered efivars operations <6>[ 5.192282] NetLabel: Initializing <6>[ 5.195920] NetLabel: domain hash size = 128 <6>[ 5.199918] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 5.206033] NetLabel: unlabeled traffic allowed by default <6>[ 5.210942] mctp: management component transport protocol core <6>[ 5.216921] NET: Registered PF_MCTP protocol family <6>[ 5.221994] PCI: Using ACPI for IRQ routing <7>[ 5.242358] PCI: pci_cache_line_size set to 64 bytes <6>[ 5.242616] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 5.252182] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 5.258934] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 5.265926] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 5.272924] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 5.279925] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 5.287452] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 5.287911] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 5.287911] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 5.306944] vgaarb: loaded <7>[ 5.312950] Monitor-Mwait will be used to enter C-1 state <7>[ 5.313055] Monitor-Mwait will be used to enter C-2 state <7>[ 5.313055] Monitor-Mwait will be used to enter C-3 state <6>[ 5.319277] clocksource: Switched to clocksource tsc-early <5>[ 5.325784] VFS: Disk quotas dquot_6.6.0 <6>[ 5.329795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 5.338800] AppArmor: AppArmor Filesystem Enabled <6>[ 5.343721] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 5.349081] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 5.354442] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 5.359186] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 5.363930] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 5.368677] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 5.373426] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 5.378170] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 5.382916] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 5.387660] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 5.393019] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 5.398467] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 5.403968] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 5.408808] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 5.415175] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 5.421333] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 5.427479] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 5.434403] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 5.440546] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 5.446693] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 5.453622] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 5.460552] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 5.468264] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 5.474467] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 5.480684] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 5.486840] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 5.492987] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 5.499131] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 5.505275] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 5.511422] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 5.517652] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 5.524581] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 5.531508] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 5.539641] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 5.547529] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 5.554806] pnp: PnP ACPI init <6>[ 5.605609] pnp: PnP ACPI: found 1 devices <6>[ 5.626833] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 5.636197] NET: Registered PF_INET protocol family <6>[ 5.641359] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 5.652117] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 5.661362] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 5.669417] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 5.678806] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 5.689273] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 5.696491] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 5.704927] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 5.713799] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 5.719597] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 5.728099] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 5.736601] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 5.745156] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 5.751996] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 5.758855] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 5.765700] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 5.773429] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 5.781154] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 5.788894] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 5.796614] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 5.803524] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 5.808802] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 5.814968] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 5.821829] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 5.830001] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 5.835279] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 5.841427] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.848275] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 5.856431] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 5.861703] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 5.867858] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.874709] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 5.882869] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 5.887879] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 5.894023] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 5.900869] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 5.905906] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 5.912780] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 5.919011] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 5.925236] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 5.932162] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 5.939087] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 5.946363] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 5.951980] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 5.958296] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 5.965918] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 5.971539] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 5.977854] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 5.985475] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 5.991091] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 5.997405] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 6.005030] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 6.010647] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 6.016963] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 6.024711] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 6.032705] PCI: CLS 0 bytes, default 64 <6>[ 6.036884] DMAR: No RMRR found <6>[ 6.040151] DMAR: No ATSR found <6>[ 6.043394] DMAR: dmar1: Using Queued invalidation <6>[ 6.048443] DMAR: dmar0: Using Queued invalidation <6>[ 6.053282] DMAR: dmar2: Using Queued invalidation <6>[ 6.059428] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 6.064646] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 6.069866] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 6.075048] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 6.084764] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 6.092774] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 6.097979] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 6.103168] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 6.108360] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 6.113567] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 6.118722] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 6.123868] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 6.129062] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 6.134336] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 6.139626] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 6.144863] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 6.150177] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 6.155418] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 6.160659] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 6.165898] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 6.171173] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 6.176441] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 6.181767] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 6.187078] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 6.192322] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 6.197564] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 6.202816] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 6.208113] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 6.213439] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 6.231624] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 6.238138] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 6.244638] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 6.261046] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 6.271378] clocksource: Switched to clocksource tsc <6>[ 6.276589] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 6.293807] Initialise system trusted keyrings <5>[ 6.298368] Key type blacklist registered <6>[ 6.302921] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 6.321119] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 6.327132] ntfs3: Enabled Linux POSIX ACLs support <6>[ 6.332059] ntfs3: Read-only LZX/Xpress compression included <5>[ 6.338488] integrity: Platform Keyring initialized <5>[ 6.343430] integrity: Machine keyring initialized <6>[ 6.354727] xor: automatically using best checksumming function avx <5>[ 6.361832] Key type asymmetric registered <5>[ 6.365975] Asymmetric key parser 'x509' registered <6>[ 6.371024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 6.379075] io scheduler mq-deadline registered <6>[ 6.386820] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 6.394685] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 6.401344] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 6.408456] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 6.414851] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 6.421970] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 6.428483] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 6.435468] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 6.441941] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 6.449512] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 6.455986] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 6.464133] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 6.473561] ACPI: button: Lid Switch [LID0] <6>[ 6.478236] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 6.485637] ACPI: button: Sleep Button [SLPB] <6>[ 6.490633] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 6.497854] ACPI: button: Power Button [PWRB] <6>[ 6.602891] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 6.608419] ACPI: thermal: Thermal Zone [TZ00] (39 C) <6>[ 6.615226] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 6.615467] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 6.616626] ACPI: battery: Slot [BAT0] (battery present) <6>[ 6.655263] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 6.681550] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 6.690894] hpet_acpi_add: no address or irqs in _CRS <6>[ 6.696241] Linux agpgart interface v0.103 <6>[ 6.701469] ACPI: bus type drm_connector registered <7>[ 6.707405] initcall simpledrm_platform_driver_init blacklisted <6>[ 6.729991] loop: module loaded <6>[ 6.778868] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 6.898927] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 7.150382] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 7.394214] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 7.643862] Key type psk registered <6>[ 7.656382] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 7.659072] tun: Universal TUN/TAP device driver, 1.6 <6>[ 7.668313] nvme nvme0: pci function 0000:80:00.0 <6>[ 7.669490] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.678525] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 7.688001] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.699778] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.705088] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 7.708569] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 7.712569] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.725276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 7.726702] nvme0n1: p1 p2 <6>[ 7.733622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.743727] usb usb1: Product: xHCI Host Controller <6>[ 7.748646] usb usb1: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ xhci-hcd <6>[ 7.757921] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 7.763719] hub 1-0:1.0: USB hub found <6>[ 7.767602] hub 1-0:1.0: 1 port detected <6>[ 7.775573] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 7.783912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.791187] usb usb2: Product: xHCI Host Controller <6>[ 7.796122] usb usb2: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ xhci-hcd <6>[ 7.805402] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 7.810927] hub 2-0:1.0: USB hub found <6>[ 7.814763] hub 2-0:1.0: 3 ports detected <6>[ 7.845237] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.851366] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 7.860884] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.872044] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.877331] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 7.884793] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.892136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 7.900487] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.907763] usb usb3: Product: xHCI Host Controller <6>[ 7.912685] usb usb3: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ xhci-hcd <6>[ 7.921968] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 7.927499] hub 3-0:1.0: USB hub found <6>[ 7.931391] hub 3-0:1.0: 8 ports detected <6>[ 7.966922] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 7.975313] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.982619] usb usb4: Product: xHCI Host Controller <6>[ 7.987548] usb usb4: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ xhci-hcd <6>[ 7.996827] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 8.002334] hub 4-0:1.0: USB hub found <6>[ 8.006176] hub 4-0:1.0: 2 ports detected <6>[ 8.017749] usbcore: registered new interface driver usb-storage <6>[ 8.024652] usbcore: registered new interface driver usbserial_generic <6>[ 8.031390] usbserial: USB Serial support registered for generic <6>[ 8.037582] usbcore: registered new interface driver ftdi_sio <6>[ 8.043420] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 8.050856] usbcore: registered new interface driver pl2303 <6>[ 8.056506] usbserial: USB Serial support registered for pl2303 <6>[ 8.062611] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 8.069451] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 8.791748] i8042: Can't read CTR while initializing i8042 <3>[ 8.797296] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 8.804280] mousedev: PS/2 mouse device common for all mice <6>[ 8.810951] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 8.817799] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 8.822767] rtc_cmos rtc_cmos: setting system clock to 2026-04-03T02:12:04 UTC (1775182324) <6>[ 8.831376] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 8.838434] i2c_dev: i2c /dev entries driver <6>[ 8.847534] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 8.856038] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 8.863572] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 8.875834] device-mapper: uevent: version 1.0.3 <6>[ 8.880831] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 8.889781] intel_pstate: Intel P-state driver initializing <6>[ 8.899840] Hybrid CPU capacity scaling enabled <6>[ 8.904794] processor cpu0: EM: created perf domain <6>[ 8.910163] processor cpu1: EM: created perf domain <6>[ 8.915306] processor cpu2: EM: created perf domain <6>[ 8.920408] processor cpu3: EM: created perf domain <6>[ 8.925497] processor cpu4: EM: created perf domain <6>[ 8.930597] processor cpu5: EM: created perf domain <6>[ 8.935702] processor cpu6: EM: created perf domain <6>[ 8.940801] processor cpu7: EM: created perf domain <6>[ 8.947128] intel_pstate: HWP enabled <6>[ 8.950836] sdhci: Secure Digital Host Controller Interface driver <6>[ 8.957061] sdhci: Copyright(c) Pierre Ossman <6>[ 8.961651] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 8.969777] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 8.982328] drop_monitor: Initializing network drop monitor service <6>[ 8.989088] NET: Registered PF_INET6 protocol family <6>[ 8.995544] Segment Routing with IPv6 <6>[ 8.999344] In-situ OAM (IOAM) with IPv6 <6>[ 9.003362] NET: Registered PF_PACKET protocol family <5>[ 9.008718] Key type dns_resolver registered <4>[ 9.017751] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.024465] microcode: Current revision: 0x00000124 <6>[ 9.030164] IPI shorthand broadcast: enabled <6>[ 9.049442] sched_clock: Marking stable (8854001812, 195053690)->(10236760140, -1187704638) <6>[ 9.059213] registered taskstats version 1 <5>[ 9.065100] Loading compiled-in X.509 certificates <6>[ 9.117864] Demotion targets for Node 0: null <6>[ 9.122434] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 9.122448] kmemleak: Automatic memory scanning thread started <5>[ 9.130943] Key type .fscrypt registered <5>[ 9.140517] Key type fscrypt-provisioning registered <6>[ 9.148715] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.155769] Key type encrypted registered <6>[ 9.159870] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 9.166102] ima: No TPM chip found, activating TPM-bypass! <5>[ 9.171662] Loading compiled-in module X.509 certificates <5>[ 9.177772] Loaded X.509 cert 'Build time autogenerated kernel key: 93f5a54ba01261bd268ca199e240911edff76e29' <6>[ 9.187768] ima: Allocated hash algorithm: sha256 <6>[ 9.192560] ima: No architecture policies found <6>[ 9.197233] evm: Initialising EVM extended attributes: <6>[ 9.202417] evm: security.selinux <6>[ 9.205770] evm: security.SMACK64 <6>[ 9.209129] evm: security.SMACK64EXEC <6>[ 9.212828] evm: security.SMACK64TRANSMUTE <6>[ 9.216966] evm: security.SMACK64MMAP <6>[ 9.220666] evm: security.apparmor <6>[ 9.224104] evm: security.ima <6>[ 9.227103] evm: security.capability <6>[ 9.230723] evm: HMAC attrs: 0x1 <6>[ 9.236625] PM: Magic number: 6:38:156 <6>[ 9.240699] acpi device:23: hash matches <6>[ 9.244706] acpi PNP0A08:00: hash matches <6>[ 9.248902] netconsole: network logging started <6>[ 9.254130] RAS: Correctable Errors collector initialized. <6>[ 9.259803] clk: Disabling unused clocks <6>[ 9.263772] PM: genpd: Disabling unused power domains <6>[ 9.269371] md: Waiting for all devices to be available before autodetect <6>[ 9.276208] md: If you don't use raid, use raid=noautodetect <6>[ 9.281912] md: Autodetecting RAID arrays. <6>[ 9.286052] md: autorun ... <6>[ 9.288878] md: ... autorun DONE. <6>[ 9.337176] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none. <6>[ 9.349333] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.357023] devtmpfs: mounted <6>[ 9.361222] VFS: Pivoted into new rootfs <6>[ 9.383685] Freeing unused decrypted memory: 2036K <6>[ 9.389465] Freeing unused kernel image (initmem) memory: 5780K <6>[ 9.395459] Write protecting the kernel read-only data: 36864k <6>[ 9.401950] Freeing unused kernel image (text/rodata gap) memory: 680K <6>[ 9.408772] Freeing unused kernel image (rodata/data gap) memory: 516K <6>[ 9.420715] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 9.431332] Run /sbin/init as init process <7>[ 9.435482] with arguments: <7>[ 9.435484] /sbin/init <7>[ 9.435484] with environment: <7>[ 9.435485] HOME=/ <7>[ 9.435486] TERM=linux <7>[ 9.482615] systemd[1]: Inserted module 'autofs4' <7>[ 9.509265] systemd[1]: systemd 255.4-1ubuntu8.14 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 9.542210] systemd[1]: Detected architecture x86-64. <7>[ 9.554413] systemd[1]: Hostname set to . <7>[ 9.797260] systemd[1]: Queued start job for default target graphical.target. <7>[ 9.825016] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 9.848272] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. <7>[ 9.869885] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 9.891112] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 9.907448] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 9.928971] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 9.952204] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC... <7>[ 9.973166] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... <7>[ 9.987183] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.006206] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.020188] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.037203] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.053214] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.072514] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.091756] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.110618] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.134888] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.149706] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.169544] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.188658] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.208699] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.225610] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.245413] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.267644] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.286455] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.319793] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.340492] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.351329] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.370015] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.391845] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.404662] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.421319] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.439103] systemd-journald[203]: Collecting audit messages is disabled. <7>[ 10.447626] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.467806] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.488162] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.506404] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.522467] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.541500] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.559686] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <6>[ 10.568968] pstore: Using crash dump compression: deflate <6>[ 10.576794] pstore: Registered efi_pstore as persistent store backend <7>[ 10.599018] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.608465] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.629813] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 10.630846] fuse: init (API version 7.45) <7>[ 10.653230] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.667397] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.683948] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.702935] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 10.720120] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 11.061570] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. <6>[ 11.117032] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:411435008k SS <7>[ 11.154124] systemd-journald[203]: Received client request to flush runtime journal. <7>[ 11.168169] systemd-journald[203]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 11.168188] systemd-journald[203]: Rotating system journal. <4>[ 11.634883] nvme nvme0: using unchecked data buffer <6>[ 11.759967] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 11.761233] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.766460] ACPI: bus type thunderbolt registered <6>[ 11.771684] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 11.771695] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 11.816976] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.842183] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 11.895905] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 11.903563] intel-hid INTC107B:00: platform supports 5 button array <4>[ 11.903974] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring <6>[ 11.912413] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 11.935725] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 11.942125] intel_rapl_common: Found RAPL domain package <6>[ 11.942130] intel_rapl_common: Found RAPL domain dram <6>[ 11.969711] pci 0000:00:05.0: Setting to D3hot <6>[ 11.981557] intel_pmc_core INT33A1:00: initialized <3>[ 12.044640] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 12.051823] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 12.073015] audit: type=1400 audit(1775182327.748:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=400 comm="apparmor_parser" <5>[ 12.073333] audit: type=1400 audit(1775182327.749:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=403 comm="apparmor_parser" <5>[ 12.073571] audit: type=1400 audit(1775182327.749:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=402 comm="apparmor_parser" <5>[ 12.074336] audit: type=1400 audit(1775182327.750:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=404 comm="apparmor_parser" <5>[ 12.077025] audit: type=1400 audit(1775182327.752:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=405 comm="apparmor_parser" <5>[ 12.080311] audit: type=1400 audit(1775182327.755:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=407 comm="apparmor_parser" <5>[ 12.081660] audit: type=1400 audit(1775182327.757:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=408 comm="apparmor_parser" <5>[ 12.082531] audit: type=1400 audit(1775182327.758:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=409 comm="apparmor_parser" <5>[ 12.084556] audit: type=1400 audit(1775182327.760:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=410 comm="apparmor_parser" <5>[ 12.085666] audit: type=1400 audit(1775182327.761:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=411 comm="apparmor_parser" <6>[ 12.148311] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 12.205734] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 12.232632] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 12.232642] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 12.232644] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 12.462369] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 12.471321] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 12.491190] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 12.520024] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 12.528398] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 12.598159] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 12.598169] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 12.598171] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 12.598172] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 12.598173] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 12.598174] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 12.723145] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 12.723818] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.730658] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 195 <6>[ 12.730663] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 12.735679] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.817316] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.044258] intel_rapl_common: Found RAPL domain package <6>[ 13.044263] intel_rapl_common: Found RAPL domain core <6>[ 13.044265] intel_rapl_common: Found RAPL domain uncore <6>[ 13.044267] intel_rapl_common: Found RAPL domain dram <6>[ 13.044269] intel_rapl_common: Found RAPL domain psys <6>[ 13.083925] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.090917] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.220798] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.230381] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.254850] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.290297] hid: raw HID events driver (C) Jiri Kosina <6>[ 13.301005] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <4>[ 13.302630] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 13.320636] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <5>[ 13.328773] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 13.328801] 0x000000000000-0x000002000000 : "BIOS" <6>[ 13.339109] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.357593] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.363040] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.364724] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.364779] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.366562] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.367678] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.368264] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.369379] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.370116] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.370329] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.372841] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.376086] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 13.376454] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.380309] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.381906] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.385491] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.387261] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.391018] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.391618] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.394349] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.395525] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.398441] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.399163] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.402230] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.493388] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.498839] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.508713] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.513546] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.517923] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.524832] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.533858] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.536360] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 13.542051] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.544709] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 13.549020] block nvme0n1: No UUID available providing old NGUID <6>[ 13.550768] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.555942] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.560246] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.565956] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.572684] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.576971] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.583448] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.588034] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.594916] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.599591] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.699434] evm: overlay not supported <6>[ 14.048435] loop0: detected capacity change from 0 to 8 <6>[ 14.444301] Consider using thermal netlink events interface <6>[ 18.631432] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 23.709330] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 23.711426] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <3>[ 24.269240] ucsi_acpi USBC000:00: failed to reset PPM! <3>[ 24.274572] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <7>[ 25.951107] systemd-journald[203]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 52.187514] [IGT] xe_module_load: executing <4>[ 52.187605] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.196848] [IGT] xe_module_load: starting subtest load <5>[ 52.523827] Setting dangerous option force_probe - tainting kernel <6>[ 52.527240] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 52.528767] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 52.529469] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.529478] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.529675] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.529778] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.532172] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.532350] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.532493] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.532629] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.532747] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.532845] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.532938] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.533030] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.533143] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.533260] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.533372] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.533497] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.533610] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.533721] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.533836] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.533953] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.534082] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.534231] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.534374] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.534488] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.534597] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.534713] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.534826] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.534931] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.535037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.535225] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.535353] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.535479] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.535583] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.535688] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.535792] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.535893] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.535992] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.536121] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.536243] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.536363] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.536463] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.536563] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.536658] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.536747] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.536841] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.536939] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.537044] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.537513] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.537706] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.537836] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.537960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.538103] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.538261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.538415] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 52.538544] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.538657] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.538785] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.538921] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.539055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.539224] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.539362] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.539479] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.539590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.539700] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.539800] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.539913] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.540024] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.540159] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.540293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.540431] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.540555] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.540667] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.540771] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.540871] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.540998] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.541191] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.541375] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.541527] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.541721] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.541898] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.542038] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.542193] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.542378] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 52.542494] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.542628] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.542760] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.542904] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.543018] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.543169] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.543301] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.543673] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.543774] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.544260] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.544755] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.544908] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.545020] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.545142] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.545260] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.545371] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.545469] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.545567] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.545660] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.545753] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.545851] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.545939] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.546026] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.546121] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.548394] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.548541] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.548659] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.548783] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.548901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.549013] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.549162] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.549299] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.549434] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.549568] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.549700] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.549881] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.550186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.550460] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.550742] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.550996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.551268] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.551515] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.551762] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.552005] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.552272] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.552518] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.552776] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.553020] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.553296] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.553544] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.553743] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 52.553793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.554038] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.554316] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.554559] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.562430] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.562716] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.562986] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.563353] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:392:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.563718] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:392:DDI A/PHY A] <7>[ 52.564100] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.564364] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.564630] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.564902] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.565198] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.565447] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.565692] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <6>[ 52.565951] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.565924] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.566200] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.566466] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:392:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.566719] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.566901] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.567026] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.567166] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.567292] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.567447] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.567635] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.569087] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.569290] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 52.595108] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.607097] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.631085] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.667079] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.679080] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.739098] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.088123] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.088134] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.088136] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.088137] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.088140] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.088143] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.088144] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 53.088149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.088150] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 53.088153] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.088194] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.088196] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.088197] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.088212] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.088339] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.100084] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:393:eDP-1] Performing OUI wait (0 ms) <7>[ 53.112086] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 53.112208] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] AUX Backlight Control Supported! <7>[ 53.112317] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Using VESA eDP backlight controls <7>[ 53.112423] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:393:eDP-1] DRRS type: seamless <7>[ 53.124082] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 53.124101] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 53.124229] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 53.124361] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 53.124478] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using AUX VESA interface for backlight control <7>[ 53.124586] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:393:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 53.124746] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.124846] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.124941] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.125036] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.125142] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.125274] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.125482] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:401:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 53.125658] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.125787] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:401:DDI TC1/PHY TC1] <7>[ 53.126143] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:413:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 53.126286] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.126406] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:413:DDI TC2/PHY TC2] <7>[ 53.126657] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:421:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 53.126792] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.126914] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:421:DDI TC3/PHY TC3] <7>[ 53.127291] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 53.127417] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 53.127837] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7>[ 53.127959] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled <7>[ 53.128088] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled <7>[ 53.128195] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7>[ 53.128299] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7>[ 53.128401] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7>[ 53.128494] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7>[ 53.128586] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7>[ 53.128678] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7>[ 53.128770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B <7>[ 53.128862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B <7>[ 53.128955] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B <7>[ 53.129048] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B <7>[ 53.129161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B <7>[ 53.129260] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B <7>[ 53.129354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C <7>[ 53.129450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C <7>[ 53.129537] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C <7>[ 53.129622] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C <7>[ 53.129706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C <7>[ 53.129790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C <7>[ 53.130864] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 53.130982] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:392:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 53.131088] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.131195] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 53.131302] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.131392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.131475] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.131563] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.131648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 53.131732] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.131815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.131897] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:417:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.131981] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.132074] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 53.132162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.132263] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.132366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:425:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.133377] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 53.133478] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 53.133578] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.133676] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 53.133778] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.133877] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.133974] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.134072] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.134218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:393:eDP-1] hw state readout: enabled <7>[ 53.134352] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:402:DP-1] hw state readout: disabled <7>[ 53.134451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:414:DP-2] hw state readout: disabled <7>[ 53.134541] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:422:DP-3] hw state readout: disabled <7>[ 53.134704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 173855 kHz <7>[ 53.134790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7>[ 53.134878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7>[ 53.134965] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7>[ 53.135051] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7>[ 53.135174] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7>[ 53.135283] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 173855 kHz <7>[ 53.135385] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz <7>[ 53.135471] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz <7>[ 53.135551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz <7>[ 53.135629] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz <7>[ 53.135708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz <7>[ 53.135787] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz <7>[ 53.135862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz <7>[ 53.135937] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz <7>[ 53.136011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz <7>[ 53.136104] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz <7>[ 53.136209] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz <7>[ 53.136316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz <7>[ 53.136413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz <7>[ 53.136493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz <7>[ 53.136719] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 53.136801] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.136883] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.136964] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 53.137081] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 53.137222] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 53.137394] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 53.137505] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 53.137755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7>[ 53.137860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.137964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 53.138072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.138203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.138332] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.138439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.138536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 53.138634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.138732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.138828] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.138924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 53.139019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 53.139139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 53.139266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.139390] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 53.139489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 53.139585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.139682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 53.139776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.139869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.139961] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.140053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.140185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.140304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 53.140410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.140507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.140594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 53.140682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.140770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.140858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.140946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.141033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.141146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.141259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.141372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.141466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.141552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.141639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.141725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.141809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.141894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.141981] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 53.142082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.142206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.142327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.142427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.142516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.142606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.142695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.142784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.142872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.142959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.143045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.143167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state] <7>[ 53.143279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state] <7>[ 53.143392] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 53.143686] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 53.143791] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 53.143792] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6>[ 53.168223] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 53.174747] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.174874] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 53.174970] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 53.175054] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.175162] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.175249] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.175335] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.175418] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.175501] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.175575] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.175649] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.175721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.175793] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.175863] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.175932] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.176046] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 53.187313] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.188316] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.188661] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,0000007f <7>[ 53.188791] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,0000007f <7>[ 53.188907] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 53.189017] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 53.189141] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.828021] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.828023] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.828024] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.828177] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.828302] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 53.828417] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 53.828531] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.828635] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.828738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.828869] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.829007] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.829156] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.829263] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.829372] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.829476] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.830474] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.830581] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.830687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.830789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.830895] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.830997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.831103] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.831199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.831292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.831385] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.831476] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.831567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.831656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.831744] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.831831] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.831936] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.832031] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.832126] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.832221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.832308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.832393] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.832480] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.832567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.832651] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.832735] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.832825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.832918] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.833030] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.833127] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.833219] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 53.833303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 53.833387] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 53.833471] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 53.833554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 53.833638] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.833723] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.833815] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.833902] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.833993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.834093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.834192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.834283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.834614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.834697] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.834778] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.834874] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.835286] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.835365] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.835444] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.835521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.835821] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.835916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.836001] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.836086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.836170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.836250] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.836328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.836775] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.836920] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.837022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.837123] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.837206] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.837283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.837362] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.837439] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.837515] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.837590] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.837663] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.837741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.837813] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.837889] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.837963] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.838062] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.838243] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.839483] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.842477] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.859316] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 53.870227] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.870631] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.871993] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 53.872235] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.872424] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.872581] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.872727] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.872871] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.873014] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.873179] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.873329] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 53.877227] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.877399] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.877550] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.880794] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.880957] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.885665] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 53.893348] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.893503] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.893627] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.893774] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.893890] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.893999] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.894104] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.894206] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.894305] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.894406] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.894505] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.894600] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.894698] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.894794] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.896255] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.898490] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.899530] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.899672] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.899826] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.920542] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.921225] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.921588] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 53.921908] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 53.922184] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.922568] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.922827] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.923068] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.923073] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.923076] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.923079] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.923082] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.923084] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.923087] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.923090] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.923093] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.923096] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.923459] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.923800] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 53.924130] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 53.924520] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 53.924816] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 53.925101] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 53.925405] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 53.925672] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 53.925933] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 53.926204] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 53.926629] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.926856] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 53.927078] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 53.927365] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 53.927580] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 53.927774] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 53.927966] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 53.928166] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 53.928340] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 53.928510] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 53.928738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.930112] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.930263] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.930417] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.930563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.930700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.930846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.930974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.931117] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 53.931246] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.931363] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.931478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.931593] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.931714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.931836] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.931955] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.932082] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.932199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.932314] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.932423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.932529] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.932629] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.932728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.932825] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.932918] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.933013] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.933113] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.933212] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.933310] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.933394] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.933476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.933569] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.933662] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.933753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 53.933844] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 53.933933] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 53.934032] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 53.934121] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 53.934208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 53.934294] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 53.934378] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 53.934456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 53.934886] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.934986] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.935087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.935186] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 53.935282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 53.935360] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 53.935435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 53.935513] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 53.935591] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 53.935668] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 53.935744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 53.935819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 53.936196] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.936280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.936362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.936917] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.937071] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.937165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.937264] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.937359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.937444] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.937518] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.937591] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.937662] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.937732] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.937800] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.937868] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.937948] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.938023] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.938096] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.938192] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.938306] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.939564] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.962221] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 53.982483] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.983102] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.985182] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.985532] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.990647] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.991012] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.995974] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.996306] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.040108] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 54.041214] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.041601] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.042003] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.042444] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.043755] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 54.044243] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 54.044653] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 54.046897] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7>[ 54.047476] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7>[ 54.048015] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7>[ 54.048566] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7>[ 54.049075] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7>[ 54.049562] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008 <7>[ 54.050042] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108 <7>[ 54.050456] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208 <7>[ 54.050954] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308 <7>[ 54.051404] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8 <7>[ 54.051807] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008 <7>[ 54.052260] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108 <7>[ 54.052629] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208 <7>[ 54.053002] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308 <7>[ 54.053390] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8 <7>[ 54.054143] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 54.054431] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 54.054730] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 54.055116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset] <7>[ 54.055435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset] <7>[ 54.056923] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 54.057140] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 54.072670] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7>[ 54.073256] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C] <7>[ 54.088597] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:393:eDP-1] adding connector to sysfs <7>[ 54.094966] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:393:eDP-1] backlight device intel_backlight registered <7>[ 54.095547] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 54.096010] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Panel prepare <7>[ 54.097103] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 54.100277] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:393:eDP-1] generating connector hotplug event <7>[ 54.100377] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:402:DP-1] adding connector to sysfs <7>[ 54.101069] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 54.102080] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:402:DP-1] generating connector hotplug event <7>[ 54.102128] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:414:DP-2] adding connector to sysfs <7>[ 54.102661] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 54.103420] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:414:DP-2] generating connector hotplug event <7>[ 54.103461] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:422:DP-3] adding connector to sysfs <7>[ 54.103908] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 54.104634] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:422:DP-3] generating connector hotplug event <6>[ 54.104662] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 54.104690] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 54.114310] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 54.118448] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7>[ 54.119776] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 54.119949] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 54.120567] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 54.120574] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 54.121664] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7>[ 54.121794] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping <6>[ 54.121892] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 54.121916] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping <7>[ 54.122034] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 54.122520] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.122574] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 54.122800] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 54.122809] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 54.124424] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.124787] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.124948] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.125100] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.125370] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.125378] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.125381] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.125383] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.125387] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.125391] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.125393] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 54.125399] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.125401] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 54.125405] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.125437] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 54.125682] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.125838] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.126210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] status updated from unknown to connected <5>[ 54.126423] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.126425] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.126427] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.126500] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 54.126506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.126511] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.126515] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 54.126521] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 54.126707] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.126859] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] status updated from unknown to disconnected <7>[ 54.126864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 54.126868] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 54.126871] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 54.127039] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.127181] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] status updated from unknown to disconnected <7>[ 54.127186] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 54.127189] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 54.127192] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 54.127347] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.127492] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] status updated from unknown to disconnected <7>[ 54.127498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 54.127501] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 54.127504] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 54.127507] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 54.127509] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 54.127618] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.127639] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 54.127642] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 54.127823] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.127933] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 54.127946] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 54.127931] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <6>[ 54.128046] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 54.128167] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 54.128299] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 54.130334] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 54.130718] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 54.131094] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 54.131102] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 54.135423] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 54.136559] fbcon: xedrmfb (fb0) is primary device <7>[ 54.137656] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 54.137842] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 54.138001] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 54.138169] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 54.138358] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7>[ 54.138514] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 54.138668] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7>[ 54.138818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 54.138966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.139113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 54.139270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.139414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.139556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.139699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.139840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.139981] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.140122] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.140467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.140605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.140742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 54.140878] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.141014] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 54.141149] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.141296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.141430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.141562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.141694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.141822] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.141941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.142070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.142230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 54.142367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 54.142505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 54.142621] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7>[ 54.142755] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7>[ 54.142932] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 54.143066] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 54.143425] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 54.143541] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 54.143655] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 54.143765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.143875] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.143985] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.144093] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.144250] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.144358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.144464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.144583] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.144707] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.144827] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.144933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.145289] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145491] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145590] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.145688] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145783] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.145889] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.146028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1 <7>[ 54.146182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 54.146326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 54.146469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.146605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.146739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 54.146936] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7>[ 54.147093] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 54.147254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7>[ 54.147393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.147529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 54.147662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.147793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.147926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.148058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.148203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <6>[ 54.148373] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 54.148347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.148478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.148620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.148756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 54.148897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 54.149024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 54.149163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 54.149288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 54.149428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 54.149507] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 54.149562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 54.149686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 54.149812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 54.149937] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.150066] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 54.150203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 54.150335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.150470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 54.150603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.150741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.150866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.151001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.151148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.151282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 54.151416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.151548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.151681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 54.151812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.151943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.152078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.152190] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.152304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 54.152421] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.152523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 54.152619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.152708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.152793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.152881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.152981] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.153121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.153252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 54.153386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.153505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.153622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.153739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.153855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.153977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.154091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.154203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.154330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.154458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.154579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.154692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 54.154802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 54.154912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 54.155045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7>[ 54.155171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7>[ 54.155292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7>[ 54.155413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7>[ 54.155539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7>[ 54.171809] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.171900] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 54.172012] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.172176] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.172333] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.172487] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.172665] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.172818] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.172962] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.173043] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 54.173108] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.173229] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 54.173249] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.173388] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.173523] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.173665] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.173801] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.173935] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.174068] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.174200] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.174332] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.174465] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.174600] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.174736] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.174869] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.175002] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.175135] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.175268] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.175400] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.175532] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.175688] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.175822] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.175958] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.176089] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.176220] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.176352] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.176484] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.176620] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.176754] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 54.184530] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 54.187143] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 54.188101] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 54.192709] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 54.376184] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7>[ 54.377347] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.390635] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.391157] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.391704] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 54.393074] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.393553] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.445593] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.446104] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 54.452942] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.453443] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.453503] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7>[ 54.453998] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.454934] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 54.455955] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.456880] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.457408] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7>[ 54.457853] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7>[ 54.458297] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7>[ 54.458720] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7>[ 54.459156] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7>[ 54.459576] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7>[ 54.459991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7>[ 54.460414] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7>[ 54.460803] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7>[ 54.461237] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7>[ 54.461623] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7>[ 54.462036] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7>[ 54.462428] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7>[ 54.462953] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.464774] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7>[ 54.465309] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 54.467554] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.467902] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining) <7>[ 54.481273] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.481770] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 54.482251] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.482734] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 54.584347] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.950101] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 55.051664] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.052122] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 55.052566] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 55.088880] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.089282] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 55.089661] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 55.090107] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 55.163333] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.163343] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.163358] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.261850] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.262287] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.262631] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 55.264607] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.266032] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 55.266777] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 55.267925] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 55.269272] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 55.270430] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 55.270880] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 55.272433] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 55.272892] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 55.273819] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 55.274523] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 55.275042] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 55.275593] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <7>[ 55.292106] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 55.294357] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7>[ 55.294983] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7>[ 55.296937] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 55.298829] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 55.300746] Console: switching to colour frame buffer device 180x56 <7>[ 55.300573] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 55.301394] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:393:eDP-1] set backlight level = 192000 <7>[ 55.301905] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <6>[ 55.331977] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.332008] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.332610] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.333305] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.333896] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.334501] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.335128] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.335707] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.336265] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.336808] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.337340] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.337795] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.338263] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.338710] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.339121] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.339470] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.339804] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.340151] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.340500] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.340785] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.341089] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.341353] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.341607] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.342561] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.342778] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.343047] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.343260] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 55.343487] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.343702] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 55.343930] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.344110] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 55.344307] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.344495] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.344657] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.347420] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.358106] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.358128] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.358615] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 55.358635] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 55.359369] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.359859] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.360139] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.360362] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.360815] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.360830] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.360834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.360836] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.360843] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.360849] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.360853] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 55.360869] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.360871] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 55.360878] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.360916] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 55.361132] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.361344] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.361914] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.361918] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.361921] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.362046] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 55.362063] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.362071] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.362079] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 55.362086] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 55.362372] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.362668] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 55.362675] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 55.362682] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 55.362932] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.363148] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 55.363154] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 55.363161] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 55.363422] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.363662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 55.363668] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 55.363675] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 55.363680] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 55.363685] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 55.363872] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.363911] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 55.363917] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.363972] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.366382] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.366701] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.375979] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.410814] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.411769] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.412289] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.418874] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.419436] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.426347] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.426722] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.426590] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 55.427417] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.459200] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.459404] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.459529] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.362047] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.362173] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.362274] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.882931] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.883618] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067