Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-gd512e54bb (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4843-dba2251b00d3faac3-debug+ x86_64)
Out 
Using IGT_SRANDOM=1775147702 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Dmesg
<6> [247.750202] Console: switching to colour dummy device 80x25
<6> [247.750877] [IGT] kms_force_connector_basic: executing
<7> [247.756803] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [247.756825] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.756841] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.761283] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.761388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.761403] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.765804] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.765850] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.765859] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.770195] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [247.770691] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [247.771410] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [247.771424] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.771432] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.771874] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [247.772127] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [247.772542] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [247.772783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [247.772806] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.773039] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [247.775327] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [247.775345] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [247.775578] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from disconnected to connected
<7> [247.775825] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [247.775834] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.775845] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.775853] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [247.775862] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [247.775869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.775933] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.775942] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.776330] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [247.776564] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [247.776947] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [247.777193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [247.777211] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.777492] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [247.777752] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [247.777778] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [247.780090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [247.780110] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [247.780525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [247.780537] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.780548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.780557] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [247.780566] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [247.780575] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.781020] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:552:HDMI-A-1] EDID override set
<7> [247.781072] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.781083] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.781806] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD monitor IGT
<7> [247.781821] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD size 24, SAD count 0
<7> [247.782003] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [247.782268] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [247.782659] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [247.782908] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [247.783189] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [247.783214] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [247.783231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [247.783239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [247.783361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [247.783372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.783381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.783389] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.783646] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [247.783882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.783892] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.784361] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [247.784622] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [247.785014] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [247.785274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [247.785292] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.785538] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [247.787864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [247.787884] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [247.788141] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:552:HDMI-A-1] EDID changed, epoch counter 2
<7> [247.788309] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [247.788331] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [247.788353] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [247.788362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.788372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.788383] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [247.788391] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [247.788401] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.788743] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [247.788756] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.788767] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.793082] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from connected to disconnected
<7> [247.793105] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.793177] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [247.793335] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [247.793406] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.793419] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.797782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [247.798389] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [247.801858] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [247.802930] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [247.811998] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [247.812012] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [247.812142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [247.812155] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [247.813778] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [247.814463] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [247.814718] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [247.814981] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [247.815319] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [247.815337] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [247.815348] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [247.815357] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [247.815368] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [247.815410] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [247.815685] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [247.815967] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [247.816838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [247.816852] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [247.816864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [247.816876] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [247.816888] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [247.817277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [247.817291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [247.817305] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [247.817664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [247.817676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [247.817686] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [247.818037] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [247.818049] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.818060] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.822443] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.822454] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes
<7> [247.822464] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no
<7> [247.822472] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [247.822478] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [247.822485] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no
<7> [247.822537] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [247.822572] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200
<7> [247.822582] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [247.822621] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)
<7> [247.828606] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [247.830053] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:512:eDP-1] force updated from 0 to 0 or reprobing
<7> [247.830069] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [247.830080] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [247.830966] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [247.831568] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [247.831873] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [247.832164] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [247.832513] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [247.832529] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [247.832539] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [247.832549] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [247.832560] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [247.832597] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [247.832878] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [247.833155] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [247.834003] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [247.834014] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [247.834027] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [247.834092] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [247.834103] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [247.834811] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [247.835357] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [247.835635] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [247.835909] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [247.836227] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [247.836255] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [247.836264] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [247.836275] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [247.836285] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [247.836333] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [247.836608] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [247.836886] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [247.837637] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [247.837649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [247.837659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [247.837890] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:eDP-1] EDID override reset
<7> [247.837932] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [247.837943] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [247.838654] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [247.839184] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [247.839678] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [247.839956] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [247.840367] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [247.840382] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [247.840392] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [247.840403] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [247.840413] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [247.840447] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [247.840721] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [247.840994] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [247.841752] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [247.841762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [247.841771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [247.842027] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:521:DP-1] EDID override reset
<7> [247.842069] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [247.842080] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [247.842486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [247.842721] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [247.842761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [247.842771] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [247.843122] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [247.843392] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [247.843441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [247.843451] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [247.843797] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [247.844155] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [247.844167] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.844179] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.846331] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [247.846790] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [247.847164] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [247.848573] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.848644] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.848655] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.853055] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.853291] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [247.853332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [247.853345] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [247.857687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [247.859951] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [247.860328] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [247.862026] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [247.862848] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [247.870609] Console: switching to colour frame buffer device 240x75
Created at 2026-04-02 16:44:31