<5>[ 0.000000] Linux version 7.0.0-rc6-lgci-xe-xe-4841-7b7e57c49dffb4329-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Apr 2 10:41:27 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] printk: legacy bootconsole [earlyser0] enabled <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69914018 ESRT=0x6994ba98 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem263: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.004068] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.004072] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.009524] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.017919] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.025117] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.030608] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.040462] esrt: Reserving ESRT space from 0x000000006994ba98 to 0x000000006994bbe8. <7>[ 0.048119] e820: update [mem 0x6994b000-0x6994bfff] System RAM ==> device reserved <6>[ 0.048139] Using GB pages for direct mapping <6>[ 0.053125] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.060517] printk: early log buf free: 258368(98%) <6>[ 0.065362] Secure boot disabled <6>[ 0.068568] ACPI: Early table checksum verification disabled <6>[ 0.074197] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.079909] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.088397] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.096881] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.105361] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.109949] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.118434] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.126916] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.135398] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.143883] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.152365] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.160849] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.169338] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.177819] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.186301] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.194787] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.203268] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.211752] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.220235] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.228722] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.237206] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.245693] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.254174] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.262657] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.271141] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.279628] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.288108] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.296596] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.305078] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.313561] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.322043] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.330526] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.339012] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.347496] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.355982] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.364459] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.372946] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.381429] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.389912] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.398398] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.406879] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.415365] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.423848] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.432329] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.440815] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.449297] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.457783] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.466266] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.474749] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.483231] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.491715] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.498725] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.505737] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.512750] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.519765] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.526775] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.533790] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.540800] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.547812] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.554823] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.561836] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.568848] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.575858] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.582872] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.589885] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.596896] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.603906] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.610920] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.617933] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.624944] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.631956] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.638970] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.645980] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.652993] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.660007] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.667017] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.674029] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.681042] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.688054] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.695067] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.702079] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.709091] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.716104] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.723113] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.730125] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.737141] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.744151] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.751166] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.758174] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.765191] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.772199] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.779213] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.786226] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.793241] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.800248] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.807261] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.814272] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.821285] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.828367] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.833963] No NUMA configuration found <6>[ 0.837627] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.844300] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.850843] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.854777] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.861058] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.867932] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.874250] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.880832] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.887241] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.892354] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.892360] TSC deadline timer available <6>[ 0.896241] CPU topo: Max. logical packages: 1 <6>[ 0.900828] CPU topo: Max. logical nodes: 1 <6>[ 0.905416] CPU topo: Num. nodes per package: 1 <6>[ 0.910006] CPU topo: Max. logical dies: 1 <6>[ 0.914595] CPU topo: Max. dies per package: 1 <6>[ 0.919185] CPU topo: Max. threads per core: 1 <6>[ 0.923774] CPU topo: Num. cores per package: 8 <6>[ 0.928620] CPU topo: Num. threads per package: 8 <6>[ 0.933468] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.939538] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.947058] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.954592] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.962121] PM: hibernation: Registered nosave memory: [mem 0x6994b000-0x6994bfff] <6>[ 0.969652] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.977189] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.984806] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.990862] Booting paravirtualized kernel on bare hardware <6>[ 0.996403] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 1.006828] Zone ranges: <6>[ 1.009303] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 1.015449] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 1.021594] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 1.027740] Device empty <6>[ 1.030599] Movable zone start for each node <6>[ 1.034841] Early memory node ranges <6>[ 1.038389] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 1.044627] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 1.050854] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 1.057087] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 1.063325] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 1.070336] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 1.076149] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 1.083617] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 1.117718] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 1.123998] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 1.130315] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 1.138252] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 1.144697] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 1.144699] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 1.144717] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 ro <7>[ 1.184008] blacklisting initcall simpledrm_platform_driver_init <5>[ 1.184042] random: crng init done <6>[ 1.189102] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 1.197931] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 1.205815] software IO TLB: area num 8. <6>[ 1.217002] Fallback order for Node 0: 0 <6>[ 1.217006] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 1.227688] Policy zone: Normal <6>[ 1.230812] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 1.236949] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 1.243705] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 1.252512] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 1.291063] ********************************************************** <4>[ 1.297424] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.303914] ** ** <4>[ 1.310408] ** This system shows unhashed kernel memory addresses ** <4>[ 1.316901] ** via the console, logs, and other interfaces. This ** <4>[ 1.323392] ** might reduce the security of your system. ** <4>[ 1.329885] ** ** <4>[ 1.336379] ** If you see this message and you are not debugging ** <4>[ 1.342871] ** the kernel, report this immediately to your system ** <4>[ 1.349365] ** administrator! ** <4>[ 1.355855] ** ** <4>[ 1.362351] ** Use hash_pointers=always to force this mode off ** <4>[ 1.368844] ** ** <4>[ 1.375333] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 1.381830] ********************************************************** <6>[ 1.389399] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 1.404167] ftrace: allocating 61451 entries in 242 pages <6>[ 1.409399] ftrace: allocated 242 pages with 5 groups <6>[ 1.415493] Dynamic Preempt: lazy <6>[ 1.419153] Running RCU self tests <6>[ 1.422392] Running RCU synchronous self tests <6>[ 1.426801] rcu: Preemptible hierarchical RCU implementation. <6>[ 1.432516] rcu: RCU lockdep checking is enabled. <6>[ 1.437277] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 1.444033] Trampoline variant of Tasks RCU enabled. <6>[ 1.449050] Rude variant of Tasks RCU enabled. <6>[ 1.453551] Tracing variant of Tasks RCU enabled. <6>[ 1.458315] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 1.465932] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 1.472664] Running RCU synchronous self tests <6>[ 1.477016] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.485676] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 1.505925] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 1.512325] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 1.519447] Console: colour dummy device 80x25 <6>[ 1.523726] printk: legacy console [tty0] enabled <6>[ 1.529672] printk: legacy console [ttyS0] enabled <6>[ 1.539097] printk: legacy bootconsole [earlyser0] disabled <6>[ 1.550210] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 1.558077] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 1.562185] ... MAX_LOCK_DEPTH: 48 <6>[ 1.566375] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 1.570744] ... CLASSHASH_SIZE: 4096 <6>[ 1.575104] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 1.579638] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 1.584180] ... CHAINHASH_SIZE: 262144 <6>[ 1.588717] memory used by lock dependency info: 54145 kB <6>[ 1.594205] memory used for stack traces: 4224 kB <6>[ 1.599014] per task-struct memory footprint: 1920 bytes <6>[ 1.604462] ACPI: Core revision 20251212 <6>[ 1.609273] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 1.615083] APIC: Switch to symmetric I/O mode setup <6>[ 1.620056] DMAR: Host address width 38 <6>[ 1.623904] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 1.629242] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.638055] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 1.643395] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 1.652200] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 1.657536] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 1.666355] DMAR: SATC flags: 0x1 <6>[ 1.669689] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 1.676045] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 1.681452] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 1.692103] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 1.702601] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 1.713129] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 1.714123] CPU0: Thermal monitoring enabled (TM1) <6>[ 1.714123] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 1.714123] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 1.714123] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 1.714123] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 1.714123] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 1.714123] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 1.714123] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 1.714123] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 1.714123] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 1.714123] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 1.714123] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 1.714123] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 1.714123] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 1.714123] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 1.714123] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 1.714123] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 1.714123] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 1.714123] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 1.714123] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 1.714123] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 1.714123] Freeing SMP alternatives memory: 56K <6>[ 1.714123] pid_max: default: 32768 minimum: 301 <6>[ 1.714123] landlock: Up and running. <6>[ 1.714123] Yama: becoming mindful. <6>[ 1.714123] AppArmor: AppArmor initialized <6>[ 1.714123] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.714123] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 1.714123] VFS: Finished mounting rootfs on nullfs <6>[ 1.714123] Running RCU synchronous self tests <6>[ 1.714123] Running RCU synchronous self tests <6>[ 1.714123] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 1.714696] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 1.715293] core: cpu_core PMU driver: <6>[ 1.716128] ... version: 6 <6>[ 1.717133] ... bit width: 48 <6>[ 1.718127] ... generic counters: 10 <6>[ 1.719127] ... generic bitmap: 00000000000003ff <6>[ 1.720128] ... fixed-purpose counters: 4 <6>[ 1.721127] ... fixed-purpose bitmap: 000000000000000f <6>[ 1.722128] ... value mask: 0000ffffffffffff <6>[ 1.723128] ... max period: 00007fffffffffff <6>[ 1.724128] ... global_ctrl mask: 0001000f000003ff <6>[ 1.725211] signal: max sigframe size: 3632 <6>[ 1.726148] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 1.727239] rcu: Hierarchical SRCU implementation. <6>[ 1.728131] rcu: Max phase no-delay instances is 400. <6>[ 1.729292] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 1.732110] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 1.732415] smp: Bringing up secondary CPUs ... <6>[ 1.733535] smpboot: x86: Booting SMP configuration: <6>[ 1.734135] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.194917] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.194917] core: cpu_atom PMU driver: <6>[ 0.194917] ... version: 6 <6>[ 0.194917] ... bit width: 48 <6>[ 0.194917] ... generic counters: 8 <6>[ 0.194917] ... generic bitmap: 00000000000000ff <6>[ 0.194917] ... fixed-purpose counters: 6 <6>[ 0.194917] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.194917] ... value mask: 0000ffffffffffff <6>[ 0.194917] ... max period: 00007fffffffffff <6>[ 0.194917] ... global_ctrl mask: 00000077000000ff <6>[ 1.804263] smp: Brought up 1 node, 8 CPUs <6>[ 1.805231] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 1.809145] Memory: 32297560K/33158528K available (25943K kernel code, 5830K rwdata, 9724K rodata, 5780K init, 67896K bss, 837428K reserved, 0K cma-reserved) <6>[ 1.811132] devtmpfs: initialized <6>[ 1.812476] x86/mm: Memory block size: 128MB <6>[ 1.836185] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 1.837783] Running RCU synchronous self tests <6>[ 1.838165] Running RCU synchronous self tests <6>[ 1.839427] Running RCU Tasks wait API self tests <6>[ 1.840301] Running RCU Tasks Rude wait API self tests <6>[ 1.841127] Running RCU Tasks Trace wait API self tests <6>[ 1.842196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 1.843188] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 1.844208] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 1.846134] PM: RTC time: 20:11:08, date: 2026-04-02 <6>[ 1.847938] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 1.849358] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 1.850432] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 1.851415] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 1.852143] Callback from call_rcu_tasks_trace() invoked. <6>[ 1.853185] audit: initializing netlink subsys (disabled) <5>[ 1.854421] audit: type=2000 audit(1775160668.141:1): state=initialized audit_enabled=0 res=1 <6>[ 1.855311] thermal_sys: Registered thermal governor 'fair_share' <6>[ 1.856131] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 1.857142] thermal_sys: Registered thermal governor 'step_wise' <6>[ 1.858128] thermal_sys: Registered thermal governor 'user_space' <6>[ 1.859129] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 1.860167] cpuidle: using governor ladder <6>[ 1.862147] cpuidle: using governor menu <6>[ 1.865690] efi: Freeing EFI boot services memory: 59380K <6>[ 1.866151] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 1.867608] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 1.868151] PCI: Using configuration type 1 for base access <6>[ 1.869264] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 1.872162] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 1.873132] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 1.874129] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 1.875129] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 1.880819] raid6: skipped pq benchmark and selected avx2x4 <6>[ 1.881153] raid6: using avx2x2 recovery algorithm <6>[ 1.882689] fbcon: Taking over console <6>[ 1.883252] ACPI: Added _OSI(Module Device) <6>[ 1.883253] ACPI: Added _OSI(Processor Device) <6>[ 1.883254] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 2.647474] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 2.680059] ACPI: EC: EC started <6>[ 2.680152] ACPI: EC: interrupt blocked <6>[ 2.683824] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.684156] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 2.697243] Callback from call_rcu_tasks() invoked. <6>[ 2.934690] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 2.941296] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 2.944415] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 2.945129] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 2.975507] ACPI: Interpreter enabled <6>[ 2.976652] ACPI: PM: (supports S0 S4 S5) <6>[ 2.977128] ACPI: Using IOAPIC for interrupt routing <6>[ 2.983587] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 2.984130] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.005444] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 3.006206] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 3.051340] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 3.052793] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 3.056188] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.426305] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.456755] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 3.621551] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 3.630123] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 3.653089] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 3.663478] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.664453] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.665468] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.008270] ACPI: \_TZ_.FN00: New power resource <6>[ 4.014963] ACPI: \_TZ_.FN01: New power resource <6>[ 4.020223] ACPI: \_TZ_.FN02: New power resource <6>[ 4.026085] ACPI: \_TZ_.FN03: New power resource <6>[ 4.032046] ACPI: \_TZ_.FN04: New power resource <6>[ 4.038507] ACPI: \PIN_: New power resource <6>[ 4.049068] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 4.055208] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 4.069996] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 4.094864] PCI host bridge to bus 0000:00 <6>[ 4.099227] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.106608] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.113187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.120149] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 4.128138] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 4.136144] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.146016] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 4.155325] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 4.165273] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 4.172570] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 4.179140] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 4.186183] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.196395] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 4.204161] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 4.213263] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 4.222158] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 4.229136] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 4.237684] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 4.244226] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.250528] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 4.257200] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 4.265275] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.271230] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 4.284227] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 4.291172] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.297143] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.303150] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 4.311256] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 4.317210] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 4.331914] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 4.332174] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.333141] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.334147] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 4.335276] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 4.336217] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 4.341840] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 4.342161] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 4.343138] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.344395] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 4.345152] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 4.346130] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 4.347661] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.348178] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 4.349198] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.351897] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.352180] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 4.353132] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 4.354185] pci 0000:00:0d.2: supports D1 D2 <6>[ 4.355127] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.357556] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.358220] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 4.359168] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 4.360688] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.361128] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.363595] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 4.364183] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 4.365196] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.368960] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.369214] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 4.370233] pci 0000:00:13.0: PME# supported from D3hot <6>[ 4.371656] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.372178] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 4.373194] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.376235] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 4.377188] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 4.378160] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 4.379692] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.380225] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.392452] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.393208] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.405399] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.406201] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.418388] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.419201] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.431833] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 4.432214] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 4.433258] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.436849] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 4.437187] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.438145] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 4.439131] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 4.440257] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 4.441223] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 4.447164] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 4.448260] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.449206] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 4.450468] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 4.451330] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 4.457299] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 4.460210] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 4.461238] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 4.462166] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 4.463544] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.464702] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 4.465196] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 4.466165] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 4.468737] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.469306] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 4.470625] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 4.471367] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 4.472328] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 4.473376] pci 0000:7f:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint <6>[ 4.474244] pci 0000:7f:00.0: BAR 0 [mem 0x94380000-0x9439ffff] <6>[ 4.475131] pci 0000:7f:00.0: BAR 1 [mem 0x94300000-0x9437ffff] <6>[ 4.476131] pci 0000:7f:00.0: BAR 2 [io 0x3000-0x301f] <6>[ 4.477131] pci 0000:7f:00.0: BAR 3 [mem 0x943a0000-0x943a3fff] <6>[ 4.478136] pci 0000:7f:00.0: ROM [mem 0xfffc0000-0xffffffff pref] <6>[ 4.479307] pci 0000:7f:00.0: PME# supported from D0 D3hot D3cold <6>[ 4.480788] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 4.483168] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 4.484592] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 4.485346] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 4.487604] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 4.488355] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 4.891099] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 4.898253] Low-power S0 idle used by default for system suspend <6>[ 5.015664] ACPI: EC: interrupt unblocked <6>[ 5.019185] ACPI: EC: event unblocked <6>[ 5.023135] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 5.028139] ACPI: EC: GPE=0x6e <6>[ 5.031140] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 5.038147] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 5.046318] iommu: Default domain type: Translated <6>[ 5.051137] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 5.060194] SCSI subsystem initialized <7>[ 5.064231] libata version 3.00 loaded. <6>[ 5.064460] ACPI: bus type USB registered <6>[ 5.068324] usbcore: registered new interface driver usbfs <6>[ 5.074254] usbcore: registered new interface driver hub <6>[ 5.079216] usbcore: registered new device driver usb <6>[ 5.084383] pps_core: LinuxPPS API ver. 1 registered <6>[ 5.090134] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 5.099166] PTP clock support registered <6>[ 5.103210] EDAC MC: Ver: 3.0.0 <6>[ 5.107366] efivars: Registered efivars operations <6>[ 5.114561] NetLabel: Initializing <6>[ 5.118132] NetLabel: domain hash size = 128 <6>[ 5.122130] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 5.128242] NetLabel: unlabeled traffic allowed by default <6>[ 5.134152] mctp: management component transport protocol core <6>[ 5.139133] NET: Registered PF_MCTP protocol family <6>[ 5.144209] PCI: Using ACPI for IRQ routing <7>[ 5.164542] PCI: pci_cache_line_size set to 64 bytes <6>[ 5.164797] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 5.175392] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 5.182145] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 5.189137] e820: register RAM buffer resource [mem 0x6994b000-0x6bffffff] <6>[ 5.195136] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 5.202136] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 5.210267] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 5.211123] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 5.211123] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 5.230165] vgaarb: loaded <7>[ 5.235732] Monitor-Mwait will be used to enter C-1 state <7>[ 5.235757] Monitor-Mwait will be used to enter C-2 state <7>[ 5.235757] Monitor-Mwait will be used to enter C-3 state <6>[ 5.247613] clocksource: Switched to clocksource tsc-early <5>[ 5.254055] VFS: Disk quotas dquot_6.6.0 <6>[ 5.258031] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 5.266761] AppArmor: AppArmor Filesystem Enabled <6>[ 5.271649] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 5.276977] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 5.282300] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 5.287016] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 5.291735] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 5.296452] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 5.301167] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 5.305884] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 5.310604] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 5.315325] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 5.320653] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 5.326065] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 5.331533] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 5.336338] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 5.342696] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 5.348803] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 5.354915] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 5.361800] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 5.367915] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 5.374025] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 5.380935] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 5.387831] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 5.395451] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 5.401625] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 5.407792] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 5.414099] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 5.420213] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 5.426373] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 5.432519] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 5.438629] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 5.444825] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 5.451719] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 5.458620] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 5.466713] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 5.474552] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 5.481727] pnp: PnP ACPI init <6>[ 5.531917] pnp: PnP ACPI: found 1 devices <6>[ 5.552849] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 5.562138] NET: Registered PF_INET protocol family <6>[ 5.567331] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 5.578177] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 5.587308] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 5.595294] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 5.604423] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 5.614762] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 5.621981] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 5.630437] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 5.639354] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 5.645106] pci 0000:7f:00.0: ROM [mem 0xfffc0000-0xffffffff pref]: can't claim; no compatible bridge window <6>[ 5.654953] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 5.663404] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 5.671861] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 5.680362] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 5.687170] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 5.693968] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 5.700763] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 5.708448] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 5.716127] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 5.723808] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 5.731488] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 5.738326] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 5.743577] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 5.749705] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 5.756528] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 5.764642] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 5.769887] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 5.776001] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.782812] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 5.790929] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 5.796174] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 5.802284] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.809104] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 5.817222] pci 0000:7f:00.0: ROM [mem 0x943c0000-0x943fffff pref]: assigned <6>[ 5.824304] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 5.829286] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 5.835394] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 5.842202] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 5.847210] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 5.854049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 5.860243] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 5.866436] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 5.873322] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 5.880207] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 5.887443] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 5.893029] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 5.899309] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 5.906896] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 5.912482] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 5.918760] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 5.926341] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 5.931938] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 5.938220] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 5.945803] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 5.951389] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 5.957667] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 5.965370] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 5.973360] PCI: CLS 64 bytes, default 64 <6>[ 5.977518] DMAR: No RMRR found <6>[ 5.980694] DMAR: No ATSR found <6>[ 5.983851] DMAR: dmar1: Using Queued invalidation <6>[ 5.988655] DMAR: dmar0: Using Queued invalidation <6>[ 5.993458] DMAR: dmar2: Using Queued invalidation <6>[ 5.999486] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 6.004714] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 6.010247] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 6.015416] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 6.024990] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 6.032384] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 6.037546] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 6.042698] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 6.047861] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 6.053042] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 6.058159] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 6.063276] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 6.068435] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 6.073679] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 6.078935] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 6.084137] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 6.089409] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 6.094614] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 6.099816] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 6.105029] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 6.110264] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 6.115499] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 6.120786] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 6.126054] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 6.131264] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 6.136473] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 6.141677] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 6.146946] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 6.152204] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 6.170438] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 6.176915] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 6.183386] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 6.198517] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 6.208757] clocksource: Switched to clocksource tsc <6>[ 6.213913] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 6.232904] Initialise system trusted keyrings <5>[ 6.237430] Key type blacklist registered <6>[ 6.241962] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 6.259988] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 6.265960] ntfs3: Enabled Linux POSIX ACLs support <6>[ 6.270852] ntfs3: Read-only LZX/Xpress compression included <5>[ 6.277217] integrity: Platform Keyring initialized <5>[ 6.282120] integrity: Machine keyring initialized <6>[ 6.293362] xor: automatically using best checksumming function avx <5>[ 6.300422] Key type asymmetric registered <5>[ 6.304544] Asymmetric key parser 'x509' registered <6>[ 6.309559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 6.317606] io scheduler mq-deadline registered <6>[ 6.325252] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 6.333004] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 6.339553] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 6.346591] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 6.353132] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 6.360193] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 6.366636] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 6.373658] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 6.380063] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 6.387503] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 6.393972] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 6.402079] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 6.411433] ACPI: button: Lid Switch [LID0] <6>[ 6.416077] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 6.423428] ACPI: button: Sleep Button [SLPB] <6>[ 6.428394] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 6.435571] ACPI: button: Power Button [PWRB] <6>[ 6.536300] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 6.541735] ACPI: thermal: Thermal Zone [TZ00] (35 C) <6>[ 6.548790] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 6.548894] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 6.550046] ACPI: battery: Slot [BAT0] (battery present) <6>[ 6.587997] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 6.614150] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 6.623598] hpet_acpi_add: no address or irqs in _CRS <6>[ 6.629127] Linux agpgart interface v0.103 <6>[ 6.634512] ACPI: bus type drm_connector registered <7>[ 6.640409] initcall simpledrm_platform_driver_init blacklisted <6>[ 6.662566] loop: module loaded <6>[ 6.714882] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 6.854480] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 6.981357] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 7.108981] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 7.322328] Key type psk registered <6>[ 7.331452] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 7.333697] tun: Universal TUN/TAP device driver, 1.6 <6>[ 7.339338] nvme nvme0: pci function 0000:80:00.0 <6>[ 7.345287] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.353377] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 7.363482] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.376569] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.381858] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 7.389351] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.390538] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 7.397136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 7.409942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.410331] nvme0n1: p1 p2 <6>[ 7.417188] usb usb1: Product: xHCI Host Controller <6>[ 7.417192] usb usb1: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4841-7b7e57c49dffb4329-debug+ xhci-hcd <6>[ 7.417194] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 7.441774] hub 1-0:1.0: USB hub found <6>[ 7.445772] hub 1-0:1.0: 1 port detected <6>[ 7.456962] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 7.465359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.473227] usb usb2: Product: xHCI Host Controller <6>[ 7.478197] usb usb2: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4841-7b7e57c49dffb4329-debug+ xhci-hcd <6>[ 7.487467] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 7.494345] hub 2-0:1.0: USB hub found <6>[ 7.498235] hub 2-0:1.0: 3 ports detected <6>[ 7.588638] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.593968] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 7.605203] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.617749] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.623051] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 7.630504] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.638020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 7.646349] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.653619] usb usb3: Product: xHCI Host Controller <6>[ 7.658542] usb usb3: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4841-7b7e57c49dffb4329-debug+ xhci-hcd <6>[ 7.667804] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 7.674475] hub 3-0:1.0: USB hub found <6>[ 7.678369] hub 3-0:1.0: 8 ports detected <6>[ 7.741138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 7.749458] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.756817] usb usb4: Product: xHCI Host Controller <6>[ 7.762817] usb usb4: Manufacturer: Linux 7.0.0-rc6-lgci-xe-xe-4841-7b7e57c49dffb4329-debug+ xhci-hcd <6>[ 7.772077] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 7.778994] hub 4-0:1.0: USB hub found <6>[ 7.782878] hub 4-0:1.0: 2 ports detected <6>[ 7.800748] usbcore: registered new interface driver usb-storage <6>[ 7.807265] usbcore: registered new interface driver usbserial_generic <6>[ 7.814818] usbserial: USB Serial support registered for generic <6>[ 7.821185] usbcore: registered new interface driver ftdi_sio <6>[ 7.827087] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 7.834571] usbcore: registered new interface driver pl2303 <6>[ 7.840254] usbserial: USB Serial support registered for pl2303 <6>[ 7.846436] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 7.853261] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 8.583171] i8042: Can't read CTR while initializing i8042 <3>[ 8.588720] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 8.596847] mousedev: PS/2 mouse device common for all mice <6>[ 8.605639] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 8.614156] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 8.619224] rtc_cmos rtc_cmos: setting system clock to 2026-04-02T20:11:16 UTC (1775160676) <6>[ 8.627998] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 8.635096] i2c_dev: i2c /dev entries driver <6>[ 8.648129] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 8.656639] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 8.664157] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 8.676405] device-mapper: uevent: version 1.0.3 <6>[ 8.682171] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 8.691135] intel_pstate: Intel P-state driver initializing <6>[ 8.700294] Hybrid CPU capacity scaling enabled <6>[ 8.705100] processor cpu0: EM: created perf domain <6>[ 8.710186] processor cpu1: EM: created perf domain <6>[ 8.715266] processor cpu2: EM: created perf domain <6>[ 8.720337] processor cpu3: EM: created perf domain <6>[ 8.725411] processor cpu4: EM: created perf domain <6>[ 8.730486] processor cpu5: EM: created perf domain <6>[ 8.735560] processor cpu6: EM: created perf domain <6>[ 8.740628] processor cpu7: EM: created perf domain <6>[ 8.746639] intel_pstate: HWP enabled <6>[ 8.750316] sdhci: Secure Digital Host Controller Interface driver <6>[ 8.756503] sdhci: Copyright(c) Pierre Ossman <6>[ 8.761008] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 8.769059] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 8.781880] drop_monitor: Initializing network drop monitor service <6>[ 8.788360] NET: Registered PF_INET6 protocol family <6>[ 8.794366] Segment Routing with IPv6 <6>[ 8.798090] In-situ OAM (IOAM) with IPv6 <6>[ 8.802063] NET: Registered PF_PACKET protocol family <5>[ 8.807533] Key type dns_resolver registered <4>[ 8.817243] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 8.824216] microcode: Current revision: 0x00000124 <6>[ 8.830512] IPI shorthand broadcast: enabled <6>[ 8.851601] sched_clock: Marking stable (8657001673, 193917700)->(10072180107, -1221260734) <6>[ 8.861585] registered taskstats version 1 <5>[ 8.867205] Loading compiled-in X.509 certificates <6>[ 8.919623] Demotion targets for Node 0: null <6>[ 8.924244] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 8.924251] kmemleak: Automatic memory scanning thread started <5>[ 8.932719] Key type .fscrypt registered <5>[ 8.942221] Key type fscrypt-provisioning registered <6>[ 8.950487] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 8.957907] Key type encrypted registered <6>[ 8.961942] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 8.967620] ima: No TPM chip found, activating TPM-bypass! <5>[ 8.973133] Loading compiled-in module X.509 certificates <5>[ 8.979342] Loaded X.509 cert 'Build time autogenerated kernel key: dcf7d3096f40d8b7bf3e3f1e76ee90313dadf07f' <6>[ 8.989277] ima: Allocated hash algorithm: sha256 <6>[ 8.994071] ima: No architecture policies found <6>[ 8.998711] evm: Initialising EVM extended attributes: <6>[ 9.003861] evm: security.selinux <6>[ 9.007189] evm: security.SMACK64 <6>[ 9.010517] evm: security.SMACK64EXEC <6>[ 9.014193] evm: security.SMACK64TRANSMUTE <6>[ 9.018304] evm: security.SMACK64MMAP <6>[ 9.021992] evm: security.apparmor <6>[ 9.025404] evm: security.ima <6>[ 9.028394] evm: security.capability <6>[ 9.031986] evm: HMAC attrs: 0x1 <6>[ 9.037740] PM: Magic number: 6:874:193 <6>[ 9.041864] acpi device:1f: hash matches <6>[ 9.046028] netconsole: network logging started <6>[ 9.051248] RAS: Correctable Errors collector initialized. <6>[ 9.057407] clk: Disabling unused clocks <6>[ 9.061378] PM: genpd: Disabling unused power domains <6>[ 9.066958] md: Waiting for all devices to be available before autodetect <6>[ 9.073752] md: If you don't use raid, use raid=noautodetect <6>[ 9.079418] md: Autodetecting RAID arrays. <6>[ 9.083529] md: autorun ... <6>[ 9.086339] md: ... autorun DONE. <6>[ 9.133891] EXT4-fs (nvme0n1p2): mounted filesystem 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f ro with ordered data mode. Quota mode: none. <6>[ 9.145991] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.153537] devtmpfs: mounted <6>[ 9.156755] VFS: Pivoted into new rootfs <6>[ 9.178532] Freeing unused decrypted memory: 2036K <6>[ 9.184306] Freeing unused kernel image (initmem) memory: 5780K <6>[ 9.190255] Write protecting the kernel read-only data: 36864k <6>[ 9.196800] Freeing unused kernel image (text/rodata gap) memory: 680K <6>[ 9.203929] Freeing unused kernel image (rodata/data gap) memory: 516K <6>[ 9.214992] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 9.225180] Run /sbin/init as init process <7>[ 9.229309] with arguments: <7>[ 9.229310] /sbin/init <7>[ 9.229311] with environment: <7>[ 9.229312] HOME=/ <7>[ 9.229312] TERM=linux <7>[ 9.281017] systemd[1]: Inserted module 'autofs4' <7>[ 9.305167] systemd[1]: systemd 255.4-1ubuntu8.14 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 9.337935] systemd[1]: Detected architecture x86-64. <7>[ 9.350338] systemd[1]: Hostname set to . <7>[ 9.573158] systemd[1]: Queued start job for default target graphical.target. <7>[ 9.604372] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 9.628051] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. <7>[ 9.649446] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 9.669640] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 9.685234] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 9.706714] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 9.729063] systemd[1]: Expecting device dev-disk-by\x2duuid-BB99\x2d8925.device - /dev/disk/by-uuid/BB99-8925... <7>[ 9.749023] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... <7>[ 9.763039] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 9.782042] systemd[1]: Reached target slices.target - Slice Units. <7>[ 9.796038] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 9.812053] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 9.828075] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 9.847314] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 9.866496] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 9.883332] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 9.900375] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 9.914294] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 9.933242] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 9.960231] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 9.979546] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 9.996414] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.015252] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.030026] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.048248] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.085427] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.105621] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.116781] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.133222] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.154604] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.168291] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.185582] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.195336] systemd-journald[203]: Collecting audit messages is disabled. <7>[ 10.210458] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.241797] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.253395] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.271365] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.287836] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <6>[ 10.310654] pstore: Using crash dump compression: deflate <6>[ 10.318099] pstore: Registered efi_pstore as persistent store backend <7>[ 10.336381] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <6>[ 10.348231] fuse: init (API version 7.45) <7>[ 10.359548] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 10.369807] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.386504] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.407495] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 10.425613] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.440181] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.456587] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.475494] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 10.492534] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.770251] EXT4-fs (nvme0n1p2): re-mounted 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f r/w. <6>[ 10.867484] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:400424960k SS <7>[ 10.894202] systemd-journald[203]: Received client request to flush runtime journal. <7>[ 10.909197] systemd-journald[203]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.909218] systemd-journald[203]: Rotating system journal. <4>[ 11.430591] nvme nvme0: using unchecked data buffer <6>[ 11.537469] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.557348] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 11.582542] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 11.582554] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 11.612503] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.660995] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 11.685316] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 11.697106] intel-hid INTC107B:00: platform supports 5 button array <6>[ 11.705376] ACPI: bus type thunderbolt registered <6>[ 11.709543] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 11.781395] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 11.783119] pci 0000:00:05.0: Setting to D3hot <6>[ 11.795357] intel_pmc_core INT33A1:00: initialized <6>[ 11.796222] intel_rapl_common: Found RAPL domain package <6>[ 11.796232] intel_rapl_common: Found RAPL domain dram <3>[ 11.829038] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <5>[ 11.832410] audit: type=1400 audit(1775160679.711:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=429 comm="apparmor_parser" <5>[ 11.835556] audit: type=1400 audit(1775160679.711:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=428 comm="apparmor_parser" <5>[ 11.835568] audit: type=1400 audit(1775160679.712:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=430 comm="apparmor_parser" <5>[ 11.835577] audit: type=1400 audit(1775160679.712:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=431 comm="apparmor_parser" <3>[ 11.835825] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 11.838810] audit: type=1400 audit(1775160679.717:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=432 comm="apparmor_parser" <5>[ 11.845326] audit: type=1400 audit(1775160679.717:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=433 comm="apparmor_parser" <5>[ 11.845335] audit: type=1400 audit(1775160679.722:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=435 comm="apparmor_parser" <5>[ 11.848616] audit: type=1400 audit(1775160679.725:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=436 comm="apparmor_parser" <5>[ 11.853744] audit: type=1400 audit(1775160679.730:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=437 comm="apparmor_parser" <5>[ 11.855229] audit: type=1400 audit(1775160679.734:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=438 comm="apparmor_parser" <6>[ 12.147627] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 12.332242] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 12.354484] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 12.354494] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 12.357496] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 12.358872] e1000e 0000:7f:00.0: Disabling ASPM L1 <6>[ 12.359245] e1000e 0000:7f:00.0: enabling device (0000 -> 0002) <6>[ 12.360412] e1000e 0000:7f:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 12.377818] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 12.393624] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 12.420255] e1000e 0000:7f:00.0 0000:7f:00.0 (uninitialized): registered PHC clock <6>[ 12.487223] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 12.487231] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 12.487233] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 12.487234] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 12.487235] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 12.506643] e1000e 0000:7f:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:33:a6:7d <6>[ 12.506652] e1000e 0000:7f:00.0 eth0: Intel(R) PRO/1000 Network Connection <6>[ 12.506666] e1000e 0000:7f:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008 <6>[ 12.699350] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 12.700582] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.739148] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 12.742147] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.765704] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 12.765709] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 12.765712] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 13.000740] intel_rapl_common: Found RAPL domain package <6>[ 13.000746] intel_rapl_common: Found RAPL domain core <6>[ 13.000749] intel_rapl_common: Found RAPL domain dram <6>[ 13.000751] intel_rapl_common: Found RAPL domain psys <6>[ 13.026728] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.032632] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.098632] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.124324] e1000e 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 13.124662] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.130151] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 13.158086] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 13.170738] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 13.170763] 0x000000000000-0x000002000000 : "BIOS" <6>[ 13.182117] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 13.408135] block nvme0n1: No UUID available providing old NGUID <6>[ 13.765221] hid: raw HID events driver (C) Jiri Kosina <6>[ 13.772698] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 13.812232] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.815230] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.819477] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.819694] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.822332] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.823107] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.823869] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.826962] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.828365] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.828659] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.835388] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.836036] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.841413] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.842018] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.845591] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.848361] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.851601] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.852355] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 13.856417] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.857307] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.861058] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.861341] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 13.866212] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.991108] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.992877] loop0: detected capacity change from 0 to 8 <6>[ 14.032446] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.037459] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.049072] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.058849] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.070580] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.078147] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.087563] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.095354] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.101654] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.107757] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.115961] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.123367] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.126266] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.134383] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.138785] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.142889] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.148368] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.157838] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.163180] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.509271] Consider using thermal netlink events interface <6>[ 15.141430] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 15.141628] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 15.141674] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 15.573049] e1000e 0000:7f:00.0 enp127s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <6>[ 16.172204] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 16.172245] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 16.172281] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 24.210573] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 24.211343] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 24.578216] systemd-journald[203]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 29.699849] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 55.331943] [IGT] xe_module_load: executing <4>[ 55.331990] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 55.346237] [IGT] xe_module_load: starting subtest load <5>[ 55.669390] Setting dangerous option force_probe - tainting kernel <6>[ 55.672807] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 55.674453] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 55.674887] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 55.674895] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 55.675011] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 55.675132] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 55.677271] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 55.677413] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 55.677522] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 55.677640] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 55.677755] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 55.677847] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 55.677937] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 55.678045] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 55.678159] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 55.678292] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 55.678392] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 55.678500] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 55.678609] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 55.678717] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 55.678829] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 55.678949] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 55.679093] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 55.679245] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 55.679369] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 55.679478] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 55.679587] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 55.679693] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 55.679800] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 55.679907] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 55.680028] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 55.680162] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 55.680294] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 55.680398] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 55.680501] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 55.680600] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 55.680699] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 55.680798] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 55.680897] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 55.681000] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 55.681128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 55.681256] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 55.681358] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 55.681456] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 55.681553] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 55.681649] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 55.681746] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 55.681843] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 55.681946] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 55.682360] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 55.682482] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 55.682598] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 55.682707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 55.682810] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 55.682911] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 55.683031] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 55.683159] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 55.683282] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 55.683396] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 55.683509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 55.683613] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 55.683708] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 55.683804] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 55.683900] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 55.683994] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 55.684111] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 55.684227] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 55.684331] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 55.684420] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 55.684512] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 55.684610] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 55.684712] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 55.684814] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 55.684903] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 55.684995] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 55.685115] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 55.685268] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 55.685419] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 55.685570] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 55.685749] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 55.685932] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 55.686090] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 55.686242] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.686368] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 55.686511] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 55.686616] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 55.686739] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 55.686849] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 55.686975] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 55.687103] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 55.687240] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 55.687341] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 55.687657] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 55.687759] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 55.688261] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 55.688724] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 55.688875] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 55.689338] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 55.689429] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 55.689517] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 55.689604] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 55.689692] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 55.689779] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 55.689864] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 55.689946] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 55.690268] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 55.690369] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 55.690454] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 55.690531] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 55.691841] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 55.691996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 55.692147] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 55.692291] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 55.692403] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 55.692524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 55.692651] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 55.692766] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 55.692870] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 55.692991] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 55.693117] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 55.693241] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 55.693366] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 55.693488] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 55.693615] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 55.693730] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 55.693841] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 55.693963] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 55.694081] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 55.694198] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 55.694319] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 55.694441] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 55.694570] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 55.694693] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 55.694815] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 55.694935] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 55.695436] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 55.695571] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 55.695700] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 55.695826] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 55.696027] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 55.701166] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 55.701333] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 55.701491] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 55.701696] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:392:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 55.701918] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:392:DDI A/PHY A] <7>[ 55.702164] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 55.702323] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 55.702476] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 55.702635] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 55.702806] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 55.703047] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 55.703196] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 55.703343] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 55.703485] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 55.703661] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:392:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 55.703921] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 55.704084] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 55.704221] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 55.704349] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 55.704472] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 55.704748] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 55.705061] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 55.705990] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.706293] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 55.707247] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 55.729921] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.741896] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 55.765841] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 55.801770] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 55.813746] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 55.873654] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 56.221020] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 56.221030] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.221032] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.221033] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 56.221036] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 56.221038] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.221040] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 56.221044] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.221046] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 56.221048] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.221084] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.221086] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.221087] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.221098] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 56.221220] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.232972] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:393:eDP-1] Performing OUI wait (0 ms) <7>[ 56.244952] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 56.245089] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] AUX Backlight Control Supported! <7>[ 56.245213] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Using VESA eDP backlight controls <7>[ 56.245332] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:393:eDP-1] DRRS type: seamless <7>[ 56.256928] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 56.256945] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 56.257072] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 56.257206] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 56.257322] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using AUX VESA interface for backlight control <7>[ 56.257426] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:393:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 56.257583] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 56.257682] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 56.257777] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 56.257871] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 56.257972] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 56.258096] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 56.258304] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:401:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 56.258492] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 56.258626] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:401:DDI TC1/PHY TC1] <7>[ 56.259053] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:413:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 56.259197] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 56.259316] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:413:DDI TC2/PHY TC2] <7>[ 56.259564] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:421:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 56.259697] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 56.259818] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:421:DDI TC3/PHY TC3] <7>[ 56.260215] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 56.260334] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 56.260754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7>[ 56.260879] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled <7>[ 56.261016] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled <7>[ 56.261114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7>[ 56.261210] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7>[ 56.261305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7>[ 56.261398] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7>[ 56.261491] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7>[ 56.261581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7>[ 56.261671] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B <7>[ 56.261760] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B <7>[ 56.261848] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B <7>[ 56.261949] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B <7>[ 56.262036] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B <7>[ 56.262124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B <7>[ 56.262213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C <7>[ 56.262301] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C <7>[ 56.262386] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C <7>[ 56.262472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C <7>[ 56.262558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C <7>[ 56.262645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C <7>[ 56.263731] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 56.263852] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:392:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 56.264064] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 56.264163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 56.264252] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7>[ 56.264338] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7>[ 56.264421] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7>[ 56.264508] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 56.264594] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 56.264679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST A] hw state readout: disabled, pipe A <7>[ 56.264761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST B] hw state readout: disabled, pipe B <7>[ 56.264845] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:417:DP-MST C] hw state readout: disabled, pipe C <7>[ 56.264943] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 56.265035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 56.265125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST A] hw state readout: disabled, pipe A <7>[ 56.265213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST B] hw state readout: disabled, pipe B <7>[ 56.265297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:425:DP-MST C] hw state readout: disabled, pipe C <7>[ 56.266311] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 56.266414] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 56.266517] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 56.266618] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 56.266723] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 56.266825] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 56.266942] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 56.267046] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 56.267171] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:393:eDP-1] hw state readout: enabled <7>[ 56.267286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:402:DP-1] hw state readout: disabled <7>[ 56.267394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:414:DP-2] hw state readout: disabled <7>[ 56.267490] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:422:DP-3] hw state readout: disabled <7>[ 56.267648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 173855 kHz <7>[ 56.267749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7>[ 56.267843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7>[ 56.267947] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7>[ 56.268041] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7>[ 56.268136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7>[ 56.268232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 173855 kHz <7>[ 56.268320] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz <7>[ 56.268408] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz <7>[ 56.268496] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz <7>[ 56.268582] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz <7>[ 56.268667] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz <7>[ 56.268750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz <7>[ 56.268833] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz <7>[ 56.268924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz <7>[ 56.269013] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz <7>[ 56.269097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz <7>[ 56.269183] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz <7>[ 56.269264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz <7>[ 56.269341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz <7>[ 56.269419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz <7>[ 56.269645] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 56.269727] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 56.269811] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 56.269899] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 56.270021] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 56.270139] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 56.270280] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 56.270388] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 56.270638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7>[ 56.270761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 56.270872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 56.271000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 56.271113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 56.271225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 56.271334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 56.271438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 56.271541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 56.271642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 56.271746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 56.271850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 56.271970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 56.272079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 56.272184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 56.272288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 56.272383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 56.272477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 56.272572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 56.272664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.272757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.272850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 56.272960] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.273059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 56.273158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 56.273256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 56.273346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 56.273435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 56.273524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 56.273611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 56.273701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 56.273796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 56.273894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 56.273995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 56.274096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 56.274195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 56.274284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 56.274373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 56.274461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 56.274548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 56.274636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 56.274723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 56.274809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 56.274901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 56.275001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 56.275102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.275199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.275289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.275377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 56.275463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 56.275547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.275633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.275718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.275803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 56.275894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state] <7>[ 56.275987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state] <7>[ 56.276080] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 56.276366] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 56.276465] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 56.276466] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6>[ 56.302148] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 56.308364] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 56.308493] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 56.308582] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 56.308668] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 56.308750] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 56.308844] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 56.308930] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 56.309015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 56.309097] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 56.309173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 56.309246] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 56.309319] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 56.309390] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 56.309461] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 56.309532] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 56.309649] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 56.319862] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 56.320999] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 56.321275] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000000fb <7>[ 56.321389] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000000fb <7>[ 56.321490] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 56.321585] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 56.321677] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 56.960836] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 56.960839] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 56.960840] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 56.960997] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 56.961130] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 56.961248] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 56.961360] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 56.961467] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 56.961572] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 56.961713] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 56.961842] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 56.961994] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 56.962102] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 56.962213] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 56.962319] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 56.963392] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 56.963493] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 56.963597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 56.963705] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 56.963803] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 56.963900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 56.963994] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 56.964088] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 56.964178] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 56.964266] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 56.964357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 56.964446] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 56.964534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 56.964621] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 56.964719] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 56.964807] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 56.964893] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 56.964979] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 56.965068] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 56.965154] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 56.965239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 56.965323] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 56.965405] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 56.965485] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 56.965564] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 56.965643] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 56.965748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 56.965836] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 56.965922] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 56.966007] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 56.966091] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 56.966175] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 56.966258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 56.966339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 56.966423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 56.966508] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 56.966592] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 56.966689] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 56.966779] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 56.966871] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 56.966962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 56.967050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 56.967404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 56.967486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 56.967566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 56.967643] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 56.968030] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 56.968113] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 56.968190] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 56.968265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 56.968568] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 56.968668] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 56.968751] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 56.968834] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 56.968917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 56.968997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 56.969074] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 56.969552] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 56.969701] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 56.969795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 56.969890] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 56.969983] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 56.970072] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 56.970153] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 56.970227] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 56.970301] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 56.970372] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 56.970442] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 56.970511] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 56.970582] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 56.970657] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 56.970729] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 56.970832] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 56.971030] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 56.972423] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 56.975764] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 56.992379] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 57.003441] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 57.003769] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 57.005087] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 57.005209] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 57.005296] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 57.005380] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 57.005461] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 57.005536] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 57.005638] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 57.005735] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 57.005833] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 57.008984] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 57.009112] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 57.009211] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 57.012239] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 57.012353] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 57.015907] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.60.0 <7>[ 57.023326] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017fa1cf <7>[ 57.023667] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 57.023785] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 57.023893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 57.023992] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043f6 <7>[ 57.024087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 57.024180] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 57.024271] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 57.024359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 57.024443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 57.024527] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 57.024649] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 57.024747] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 57.024844] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 57.026018] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 57.027981] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 57.029324] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 57.029449] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 57.029605] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 57.050542] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 57.051158] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 57.051565] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 57.051909] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 57.052259] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 57.052677] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 57.053074] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 57.053450] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 57.053455] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 57.053459] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 57.053463] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 57.053467] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 57.053470] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 57.053473] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 57.053477] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 57.053481] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 57.053484] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 57.053834] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 57.054276] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 57.054830] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 57.055296] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 57.055779] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 57.056218] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 57.056674] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 57.057113] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 57.057636] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 57.058103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 57.059001] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 57.059428] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 57.059900] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 57.060329] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 57.060742] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 57.061084] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 57.061455] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 57.061831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 57.062142] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 57.062440] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 57.062887] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 57.064912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 57.065152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 57.065387] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 57.065635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 57.065838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 57.066037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 57.066226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 57.066411] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 57.066614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 57.066780] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 57.066949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 57.067109] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 57.067276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 57.067435] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 57.067612] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 57.067769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 57.067922] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 57.068067] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 57.068209] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 57.068347] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 57.068490] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 57.068617] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 57.068739] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 57.068858] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 57.068973] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 57.069085] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 57.069198] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 57.069306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 57.069411] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 57.069525] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 57.069643] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 57.069759] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 57.069872] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 57.069983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 57.070094] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 57.070204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 57.070309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 57.070409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 57.070521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 57.070627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 57.070730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 57.071174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 57.071261] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 57.071348] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 57.071432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 57.071533] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 57.071630] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 57.071729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 57.071815] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 57.071892] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 57.071969] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 57.072048] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 57.072126] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 57.072523] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 57.072630] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 57.072731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 57.073283] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 57.073422] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017fa1cf <7>[ 57.073536] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 57.073642] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 57.073746] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 57.073836] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043f6 <7>[ 57.073914] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 57.073990] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 57.074064] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 57.074135] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 57.074205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 57.074275] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 57.074344] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 57.074414] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 57.074497] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 57.074615] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 57.074752] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 57.076054] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x179e000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 57.094506] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 57.115877] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 57.116337] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 57.118283] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 57.118555] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 57.121760] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 57.121957] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 57.124960] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 57.125143] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 57.167978] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 57.169230] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 57.169843] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 57.170339] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 57.170802] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 57.171750] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 57.172158] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 57.172616] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 57.174731] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7>[ 57.175263] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7>[ 57.175841] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7>[ 57.176376] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7>[ 57.176852] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7>[ 57.177371] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008 <7>[ 57.177825] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108 <7>[ 57.178278] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208 <7>[ 57.178787] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308 <7>[ 57.179233] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8 <7>[ 57.179718] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008 <7>[ 57.180154] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108 <7>[ 57.180598] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208 <7>[ 57.181039] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308 <7>[ 57.181450] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8 <7>[ 57.182342] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 57.182670] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 57.182996] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 57.183402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset] <7>[ 57.183752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset] <7>[ 57.185452] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 57.185678] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 57.190560] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7>[ 57.191025] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C] <7>[ 57.201625] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:393:eDP-1] adding connector to sysfs <7>[ 57.206933] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:393:eDP-1] backlight device intel_backlight registered <7>[ 57.207602] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 57.208057] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Panel prepare <7>[ 57.209287] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 57.211929] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:393:eDP-1] generating connector hotplug event <7>[ 57.212057] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:402:DP-1] adding connector to sysfs <7>[ 57.212853] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 57.214047] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:402:DP-1] generating connector hotplug event <7>[ 57.214109] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:414:DP-2] adding connector to sysfs <7>[ 57.214763] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 57.215768] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:414:DP-2] generating connector hotplug event <7>[ 57.215815] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:422:DP-3] adding connector to sysfs <7>[ 57.216342] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 57.217030] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:422:DP-3] generating connector hotplug event <6>[ 57.217062] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 57.217091] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 57.227215] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 57.230681] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7>[ 57.232014] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 57.232184] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 57.232881] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 57.232886] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 57.235716] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7>[ 57.235817] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping <7>[ 57.235909] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping <7>[ 57.236003] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 57.236275] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 57.236506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 57.236513] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 57.236979] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.237778] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 57.237945] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.238100] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.238608] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.238616] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.238619] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.238621] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.238625] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.238629] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.238631] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 57.238638] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.238640] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 57.238644] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.238681] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 57.238839] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 57.238986] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 57.239376] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] status updated from unknown to connected <5>[ 57.239661] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.239665] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.239667] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.239732] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 57.239740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.239745] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.239749] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 57.239754] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 57.239973] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.240142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] status updated from unknown to disconnected <7>[ 57.240147] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 57.240151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 57.240154] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 57.240345] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.240492] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] status updated from unknown to disconnected <7>[ 57.240497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 57.240500] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 57.240503] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 57.240670] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.240812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] status updated from unknown to disconnected <7>[ 57.240816] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 57.240819] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 57.240823] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 57.240825] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 57.240828] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 57.240922] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 57.240942] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 57.240945] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 57.240967] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 57.241175] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 57.241166] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 57.241196] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 57.241316] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 57.241466] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 57.241635] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <6>[ 57.242132] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 57.243860] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 57.244655] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 57.250156] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 57.250358] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <7>[ 57.251014] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 57.251026] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <6>[ 57.251967] fbcon: xedrmfb (fb0) is primary device <7>[ 57.253085] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 57.253285] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 57.253443] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 57.253589] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 57.253719] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7>[ 57.253847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 57.253975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7>[ 57.254098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 57.254247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 57.254393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 57.254536] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 57.254680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 57.254823] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 57.254965] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 57.255105] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 57.255260] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 57.255403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 57.255541] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 57.255678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 57.255816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 57.255930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 57.256044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 57.256171] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 57.256318] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 57.256462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 57.256605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 57.256745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 57.256880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 57.257012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 57.257142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 57.257299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 57.257430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 57.257562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 57.257691] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7>[ 57.257820] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7>[ 57.257997] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 57.258135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 57.258288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 57.258407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 57.258537] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 57.258668] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 57.258785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.258900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259011] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 57.259236] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259546] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 57.259646] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259745] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.259942] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 57.260037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.260133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.260281] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.260376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 57.260472] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.260565] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.260661] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 57.260786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1 <7>[ 57.260932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 57.261075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 57.261255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 57.261401] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 57.261536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 57.261730] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7>[ 57.261867] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 57.262007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7>[ 57.262153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 57.262292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 57.262430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 57.262555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 57.262681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 57.262804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 57.262934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 57.263065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 57.263206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 57.263341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 57.263475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 57.263603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7>[ 57.263725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 57.263845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 57.263966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 57.264088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 57.264219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 57.264344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 57.264468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 57.264591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 57.264714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 57.264839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 57.264962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 57.265086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 57.265222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.265345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.265462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 57.265580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.265688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 57.265793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7>[ 57.265895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 57.265996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 57.266096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7>[ 57.266221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 57.266348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 57.266481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 57.266614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 57.266741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 57.266867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 57.266990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 57.267111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 57.267245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 57.267365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 57.267485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 57.267604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 57.267723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 57.267842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 57.267962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 57.268078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 57.268202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.268316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.268434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.268548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 57.268662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 57.268778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.268892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.269014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.269151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 57.269288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 57.269425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 57.269558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 57.269698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7>[ 57.269842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7>[ 57.269979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7>[ 57.270105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7>[ 57.270247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <6>[ 57.274299] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 57.274626] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 57.275968] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 57.276288] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 57.290864] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 57.291067] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 57.291236] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 57.291387] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 57.291532] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 57.291674] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 57.291814] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 57.291953] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 57.292091] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 57.292235] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 57.292371] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 57.292505] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 57.292638] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 57.292772] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 57.292905] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 57.293037] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 57.293173] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 57.293305] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 57.293436] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 57.293566] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 57.293697] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 57.293827] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 57.293959] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 57.294094] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 57.294225] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 57.294355] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 57.294485] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 57.294614] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 57.294742] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 57.294870] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 57.294999] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 57.295133] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 57.295263] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 57.295394] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 57.295523] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 57.295653] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 57.297206] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <6>[ 57.305022] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 57.310805] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 57.311997] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 57.313941] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 57.483998] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7>[ 57.485630] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 57.491108] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7>[ 57.491613] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 57.491629] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 57.492185] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 57.492228] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 57.543947] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 57.544548] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 57.551690] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 57.552267] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 57.552333] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7>[ 57.552870] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 57.553912] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 57.555004] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 57.555930] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 57.556429] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7>[ 57.556993] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7>[ 57.557519] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7>[ 57.558003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7>[ 57.558469] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7>[ 57.558952] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7>[ 57.559466] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7>[ 57.559936] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7>[ 57.560402] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7>[ 57.560863] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7>[ 57.561346] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7>[ 57.561817] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7>[ 57.562293] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7>[ 57.562797] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 57.564708] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7>[ 57.565278] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 57.567747] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7>[ 57.568149] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (484 ms remaining) <7>[ 57.580113] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 57.580597] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 57.581107] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 57.581653] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 57.706667] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 58.059082] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 58.069759] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 58.070437] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 58.071035] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 58.106550] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 58.107108] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 58.107638] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 58.108977] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 58.243364] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.243371] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.243712] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.283344] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 58.284065] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 58.284675] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 58.287132] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 58.288639] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 58.289651] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 58.290963] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 58.292408] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 58.293685] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 58.294181] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 58.295782] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 58.296256] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 58.297236] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 58.297924] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 58.298417] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 58.299047] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <7>[ 58.314908] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 58.317126] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7>[ 58.317732] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7>[ 58.319695] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 58.321606] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 58.323816] Console: switching to colour frame buffer device 180x56 <7>[ 58.323626] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 58.324642] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:393:eDP-1] set backlight level = 192000 <7>[ 58.325205] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <6>[ 58.355800] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 58.355828] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 58.356264] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 58.356658] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 58.356993] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 58.357310] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 58.357640] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 58.357914] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 58.358180] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 58.358453] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 58.358736] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 58.358969] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 58.359188] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 58.359412] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 58.359622] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 58.359819] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 58.360017] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 58.360217] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 58.360590] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 58.360766] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 58.360936] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 58.361095] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 58.361250] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 58.361974] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 58.362126] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 58.362296] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 58.362456] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 58.362620] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 58.362754] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 58.362906] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 58.363033] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 58.365843] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 58.366366] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 58.366648] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 58.366807] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.383971] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 58.384290] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 58.399052] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 58.399091] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 58.400143] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 58.400192] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 58.402034] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 58.402773] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 58.403236] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 58.403709] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 58.404609] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 58.404630] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 58.404636] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.404639] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 58.404650] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 58.404660] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.404665] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 58.404691] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.404695] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 58.404707] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.404782] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 58.405179] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 58.405637] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 58.406854] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 58.406861] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 58.406866] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.407051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 58.407079] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 58.407092] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 58.407104] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 58.407116] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 58.407650] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 58.408131] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 58.408600] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.409094] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 58.409500] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 58.409514] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 58.409526] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 58.409989] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 58.410375] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 58.410388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 58.410398] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 58.410845] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 58.411222] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 58.411233] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 58.411245] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 58.411253] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 58.411260] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 58.411538] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 58.411591] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 58.411600] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 58.411693] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 58.414333] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 58.414664] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 58.432544] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 58.450003] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 58.450590] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 58.451079] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.454226] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 58.454782] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 58.466360] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 58.466672] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 58.467324] [IGT] xe_module_load: exiting, ret=0 <7>[ 58.500501] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 58.501019] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 58.501453] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.566852] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 59.457858] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.457972] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.458097] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 60.928167] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off <7>[ 60.928658] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067